XPARTCO DA82-01415A Refrigerator Water Leak Service Kit
Water leak repair kit with updated internal duck bill.
Fits select Samsung refrigerator models.
Replaces Part Numbers: DA82-01415A, 3436781, AP5957964, PS10058968.
Description: This Water Leak Repair Kit is a replacement part for select Samsung refrigerator models, this field service kit used to address water leakage and excessive frost in bottom freezer or French door refrigerators with dual evaporators. The kit includes a drain probe, two drain tubes, and two silver foam strips. With these parts, you can prevent excessive frost buildup on the evaporator cover and fix issues like water leaks under the crisper or odd fan noises that stop when the doors are opened.
This is an aftermarket part that can be used as a replacement for the OEM part
XPARTCO W10384183 Refrigerator Thermistor Replaces WPW10384183
The XPARTCO W10384183 is an aftermarket replacement thermistor for Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea models. This sensor detects the temperature inside the refrigerator or freezer and sends that reading to the electronic control board, which uses it to regulate cooling and manage the defrost cycle.
Finished in black and white, made of plastic and metal, this thermistor measures approximately 4-1/2"L x 9/16"W x 1/4"H, with a 1" probe and a 3.5" lead. Includes the thermistor with its probe and wiring harness/plug. Over time, the sensor's electronics can drift or fail from age or moisture exposure. Because this sensor also plays a role in the defrost cycle on many models, a failing thermistor can cause the evaporator coils to overly frost or ice up, blocking airflow and preventing cool air from reaching the refrigerator compartment even though the freezer itself may still seem cold. Symptoms include inconsistent cooling, a refrigerator that isn't cooling despite a cold freezer, or the appliance failing to defrost properly. It directly replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996.
Quick Answer
The XPARTCO W10384183 Refrigerator Thermistor fixes Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators with inconsistent cooling, a refrigerator compartment that isn't cooling despite a cold freezer, or improper defrosting. Black/white, plastic/metal, ~4-1/2"L x 9/16"W x 1/4"H, 1" probe, 3.5" lead. Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996. If your freezer's evaporator coils are heavily frosted or iced over, blocking airflow into the refrigerator, this thermistor is a strong candidate for the cause.
Common Problems This Part Fixes
Inconsistent cooling in the refrigerator or freezer compartment
Refrigerator not cooling despite the freezer feeling cold
Evaporator coils overly frosted or iced over, blocking airflow
Refrigerator not defrosting properly
Temperature fluctuations affecting food freshness
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators built on the Whirlpool platform.
Note: A related but separate thermistor, W10384184, is used on some of the same or similar models and is sometimes sold as a paired kit alongside this part. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which thermistor your refrigerator needs.
Key Features
Aftermarket replacement thermistor — senses temperature and reports to the electronic control
Resolves "inconsistent cooling," "refrigerator not cooling despite cold freezer," and "improper defrosting" symptoms
Includes thermistor with probe and wiring harness/plug
Black/white, plastic/metal construction
Direct drop-in replacement — no modification required
Replaces WPW10384183, W10384183, 2118228, EAP11753996, AP6020677, AWP50093, PD00035299, PS11753996
Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Typical repair takes 30 to 60 minutes
Product Specifications
Part Number
W10384183
OEM Part Number
WPW10384183
Part Type
Refrigerator Thermistor
Condition
Aftermarket Replacement
Color
Black / White
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Ikea
Includes
Thermistor with probe and harness/plug
Function
Senses internal temperature and reports to the electronic control
Repair Difficulty
Easy to Moderate — 30 to 60 minutes
Quantity
1 thermistor
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Defrost Any Iced-Over Coils First Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Remove the interior panel covering the evaporator coils, typically located in the freezer. If the coils and fins are heavily frosted or iced over, allow them to fully defrost before continuing — you can speed this up with a hair dryer on a low setting, kept a safe distance away, or simply let the unit sit unplugged with the door open for a few hours. With the coils clear, locate the old thermistor and unclip it from its mounting position, noting how it's routed. Unclip the wiring harness from the old thermistor. Clip the new W10384183 thermistor into the same position, and reconnect the wiring harness fully, making sure the probe is positioned exactly as the original was. Reinstall the interior panel. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling and normal defrost cycling have returned. Tools needed: sockets, screwdriver, multimeter (for testing the old sensor), work gloves.
Frequently Asked Questions
My freezer feels cold but the refrigerator side isn't cooling. Is this the part I need?
Yes, this is a documented pattern tied to this thermistor. One customer described their evaporator coils and fins as "overly freezing," which blocked cool air from reaching the refrigerator compartment even though the freezer itself was fine. Replacing this thermistor, after first defrosting the iced-over coils, resolved the issue.
My refrigerator isn't defrosting properly. Could this be the cause?
Yes, this is a documented symptom. One customer specifically described their unit "not defrosting" and resolved it by replacing this sensor, calling the repair "very straightforward." Since this thermistor feeds temperature data into the defrost cycle on many models, a failing sensor can prevent the defrost system from operating correctly.
Do I need to defrost the coils before replacing this part?
If your evaporator coils are heavily frosted or iced over, yes — clear that ice first so you can properly access and route the new thermistor, and so you can accurately judge whether the repair has resolved the airflow problem once everything is back together.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the sensing function, probe design, and wiring harness configuration of the original WPW10384183 thermistor used in compatible Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and Ikea refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
ADQ36006101 Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Cross Reference Number: ADQ36006101, 1615781, 1810370, ABFF5, AH3531958, EA3531958, LT700P, AP5594314, PS3531958, LT700P/PC/PCS
Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor - Compatible with GE, Hotpoint, RCA, Kenmore
Product Description
Restore efficient cooling with the Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor. This OEM evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, delivering reliable performance as an authentic GE part.
Note: Includes one evaporator fan motor with 6-pin harness and thermistor. Disconnect power before installation. Check evaporator fan blade and related components (e.g., thermistor) for optimal performance.
Replaces part numbers: WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950.
Compatibility:
Compatible with models including but not limited to:
GE: 39631UGTAWW, 39631UGXAWW, 39639USTAGV, GSS25SGMDBS, GSS25WGMDBB, GSS25WGMDBB, HSS25GFPAWW, PSS26SGPASS
Hotpoint: HSS25IFMDWW, HSS25IFMCCC
RCA: RSG20IDMBFWW
Kenmore: 363.58541890, 363.58542890
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and Kenmore refrigerators.
❄️ Specifications: OEM evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor.
💪 Reliable Performance: Authentic GE part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes.
🛡️ Effective Fixes: Resolves noisy operation, inconsistent temperatures, frost buildup, or refrigerator running continuously.
Product Specification
Part Number: Genuine GE WR60X10307
Component Type: Refrigerator evaporator fan motor
Material: Plastic housing, metal motor components
Electrical Specs: 9.75V DC, 3.25W
Mounting: Screw-mounted in freezer compartment behind evaporator cover
Operating Conditions: Suitable for low-temperature refrigerator environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
Genuine OEM WR60X27396 Refrigerator Air Damper Assembly
The WR60X27396 is a genuine OEM air damper assembly for GE refrigerators, including side-by-side and bottom-mount models. The damper is a motorized flap that opens and closes to direct cold air from the freezer into the fresh food compartment, which is how the refrigerator keeps the fresh food section at the right temperature. When it sticks open or closed, or its motor stops working, the compartments fall out of balance: the fresh food section can run too warm or too cold, frost can build up, and the damper may make noise as it moves.
This is a genuine OEM part from GE Appliances, not an aftermarket equivalent, so the fit and operation match the original. It supersedes the earlier WR31X20918 damper assembly.
Quick Answer
The Genuine OEM WR60X27396 Air Damper Assembly fixes a GE refrigerator whose fresh food section is too warm or too cold, or has uneven temperatures, frost buildup, or damper noise because the damper is stuck or has failed. Genuine OEM from GE Appliances. Classic symptom: the freezer is cold but the fresh food section is warm, or the fresh food section freezes items, even with normal settings.
Common Problems This Part Fixes
Fresh food section too warm while the freezer stays cold
Fresh food section too cold, freezing food
Damper stuck open or closed, causing a temperature imbalance
Unusual clicking or buzzing noises when the damper moves
Frost or ice buildup that interferes with the damper
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This air damper assembly replaces the following part numbers:
WR60X27396, 4590355, WR09X10065, WR31X20918, WR9X10065, AGE29713, AP6280910, EAP12172988, PD00047584, PS12172988.
WR60X27396 is GE's current number for this damper, superseding WR31X20918. If your old damper or parts diagram shows WR31X20918, this is the matching replacement.
Compatibility
This damper assembly is listed for GE refrigerators, including:
Side-by-side models such as ZISS360DNKSS, ZIS420NNEII, and ZISS480DPESS
Bottom-mount models such as CFE26KP2NLS1, CDB36LP2RBS1, GDE21EGKARWW, and ZIC360NHDLH
Note: The model list above is only a sample, since one retailer lists over 150 compatible models. Confirm fit by matching the number on your old damper or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM GE damper assembly, not an aftermarket equivalent
Motorized damper that regulates cold airflow from the freezer into the fresh food section
Restores even temperatures between compartments
Authorized by GE for refrigerators using flammable refrigerant such as R600a
Supersedes the earlier WR31X20918
Product Specifications
Part Number
WR60X27396
OEM Part Number
WR60X27396
Part Type
Refrigerator Air Damper Assembly (Motorized)
Condition
Genuine OEM
Manufacturer
GE Appliances
Supersedes
WR31X20918
Application
Select GE Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator before starting, and move perishable food to a cooler or another refrigerator so it stays safe during the repair. Following your model's service guide, remove the panels or covers needed to reach the damper, which sits in the air path between the freezer and the fresh food section. Note the position of the old damper, disconnect its wiring connector, and remove the fasteners holding it in place. Install the new damper in the same position, reconnect the connector, and replace the panels. Restore power and allow time for the temperatures to stabilize before judging the repair.
Frequently Asked Questions
My freezer is cold but the fresh food section is warm. Is this the part I need?
It can be. If the damper is stuck closed, not enough cold air reaches the fresh food section. Before replacing it, check that the vents aren't blocked by food and that frost isn't jamming the damper. A stuck or failed damper is a likely cause when those are clear.
My fresh food section is freezing my food. Could this be the damper?
Yes. A damper stuck open lets too much cold air in from the freezer, which can freeze items in the fresh food section.
My old damper is marked WR31X20918. Will this work?
Yes. WR31X20918 is on the Replaces list, and WR60X27396 is its current replacement. If you're unsure, contact our support team with your model number and we'll confirm.
Is this a genuine GE part?
Yes. This is a genuine OEM part from GE Appliances, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE
Product Description
Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing.
Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277.
Compatibility:
Compatible with models including but not limited to:
LG: LSC24971ST/00, LRSC21934SW
Kenmore: 79571039010, 79571039011, 79578789801
GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers.
🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals.
💪 Reliable Performance: Ensures precise activation of ice and water dispensing.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues.
Product Specification
Part Number: XPARTCO 6600JB3001E
Component Type: Refrigerator dispenser micro switch
Material: Plastic housing, metal contacts
Electrical Rating: 16A 1/2HP, 125/250VAC
Mounting: Snap-in or screw-mounted, 1/4" terminals
Operating Conditions: Suitable for refrigerator dispenser environments
Compliance: UL listed, Prop 65 warning for California.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today!
Add to cart now for a reliable fix!
XPARTCO 297259515 Refrigerator Start Relay & 297286803 Capacitor
The XPARTCO 297259515 kit bundles the compressor start relay and the matching run capacitor for Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers. These two components mount together at the compressor and work as a team every time the compressor cycles on: the start relay delivers the initial electrical boost needed to get the compressor's start winding moving, and the run capacitor helps the compressor motor start and run efficiently once it's going. Because they sit side by side on the same compressor terminals and tend to be diagnosed together, replacing both at once is the standard, most reliable fix rather than gambling on which single component has failed.
The classic failure symptom for this pair is unmistakable: a repeated clicking sound from the compressor area as the relay tries and fails to start the compressor, paired with a refrigerator and freezer that are both running too warm because the compressor never actually starts. Real-world repair accounts back this up — technicians troubleshooting a clicking-but-not-starting compressor commonly find both the start relay and run capacitor bad at the same time, which is exactly why they're sold together as a kit. It directly replaces, for the relay: 297259502, 297259510, PS11728176, 4378266, AP5986809, EAP11728176; and for the capacitor: AP5306470, 216985001, 297286804, 1465079, 1940424, 215329902, 218909915, 7216985001, 7218909915, AH3495561, EA3495561, PS3495561, and EAP3495561.
Quick Answer
The XPARTCO 297259515 Refrigerator Start Relay & Capacitor Kit fixes Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers that won't start cooling, run too warm in both compartments, or make a repeated clicking sound from the compressor area. Includes start relay (297259515) and run capacitor (297286803). Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling.
What's In The Kit
Component
Part Number
Function
Compressor Start Relay
297259515
Delivers the initial electrical boost that kickstarts the compressor's start winding, then switches out once the compressor is running.
Compressor Run Capacitor
297286803
15 µF, helps the compressor motor start and run efficiently once the relay has engaged it.
Common Problems This Kit Fixes
Refrigerator won't start cooling at all
Fresh food and freezer compartments both running too warm
Repeated clicking sound coming from the compressor area
Compressor hums but never actually starts running
Refrigerator cycling on and off repeatedly without ever cooling properly
Refrigerator that stops suddenly during normal operation
No cooling despite the refrigerator otherwise appearing to have power
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This start relay and capacitor kit directly replaces the following OEM and cross-reference part numbers:
297259515, 297259502, 297259510, 4378266, AP5986809, EAP11728176, AFR15446, PD00029384, PS11728176, 297286803, AP5306470, 216985001, 297286804, 1465079, 1940424, 215329902, 218909915, 7216985001, 7218909915, 28PRC250150UFEX, AH3495561, EA3495561, EAP3495561, FIX3495561, AFR15479, PD00027525, PS3495561
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select Frigidaire refrigerators and freezers, and also fits select Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers built on the same platform, including model numbers such as:
CFUFH21TW, CFUMC17QW, CCFU17M1TW
FFSS2315T, FFSS2315TS0, FFSS2615T, FFSS2615TD0, FFSS2625T, FGSS2335T
LFSS2312T, LFSS2612T
FFFC22M6QW, FFFC22M6QWG, FFFH17F2QW, FFFH20F2QW, FFFU17M1QW
FFVU17F2SC, FFVU17F4QW, FFVU17F4QWE
LFFH17F3QW, LFFH20F3QM, LFFH20F3QW
TFFU20F2QW, TFFU21M1QW, WWFC22M1SW
Note: Always verify your full model number before ordering, and check the printed rating on your original run capacitor before installing the new one — see the capacitor voltage note in Product Specifications below. Contact our support team with your model number if you're unsure.
Key Features
Complete 2-piece kit — compressor start relay and matching run capacitor in one purchase
Addresses the two components most commonly found bad together on a clicking-but-not-starting compressor
Resolves "won't start cooling," "runs too warm," and "clicking sound from the compressor" symptoms
Run capacitor rated 15 µF
Both components mount directly to the compressor terminals
Direct drop-in replacement for both original components
Replaces the full cross-reference set for 297259515 and 297286803 listed above
Compatible with Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Kit Part Number
297259515
Kit Contents
1x Compressor Start Relay (297259515), 1x Run Capacitor (297286803)
Condition
Aftermarket Replacement
Capacitor Rating
15 µF
Mounting
Both components mount directly to the compressor terminals
Repair Skill Level
Experienced DIYer
Quantity
1 kit (1 relay + 1 capacitor)
Compatible Brands
Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, Westinghouse
Note on capacitor voltage: Manufacturer-facing sources disagree on this capacitor's voltage rating — some list it as 15µF/120V, others as 15µF/250V. Before installing, check the voltage printed directly on your original capacitor's body and confirm the new capacitor's printed rating matches or exceeds it. We're not publishing a single voltage figure here rather than risk stating the wrong one — contact our support team if you'd like help confirming the correct rating for your model.
Installation Notes
⚠️ Danger — The Run Capacitor Stores A Dangerous Electrical Charge Shut off power to the refrigerator at the outlet before beginning. The run capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious shock. Before touching the capacitor's terminals, discharge it by shorting the two terminals together using an insulated-handle screwdriver, or a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand.
⚠️ Unplug Refrigerator Before Starting — Both Components Mount To The Compressor Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Shut off the water supply as well if your model has an ice maker or water dispenser. Wear work gloves and safety glasses. Have an assistant help pull the refrigerator away from the wall for access to the rear panel. Locate the compressor in the machine compartment at the back or bottom of the unit, and find the start relay and run capacitor mounted directly to its terminals. Photograph the wiring and orientation of both components before removing anything. After confirming the capacitor is fully discharged, disconnect the old relay and capacitor from the compressor terminals, noting each terminal position. Install the new 297259515 relay and 297286803 capacitor from this kit in the same orientation, seating each firmly onto the correct compressor terminals. Reassemble any panels or retainers you removed, restore the water supply if applicable, and push the refrigerator back into place. Restore power and monitor the refrigerator over the next few hours to confirm the compressor starts reliably and both compartments begin cooling. Tools needed: 1/4" nut driver or socket, 1/2" wrench or adjustable wrench, needle nose pliers, flat-head screwdriver, insulated-handle screwdriver or capacitor discharge tool, work gloves, safety glasses.
Frequently Asked Questions
Do I really need both the relay and the capacitor, or could just one be bad?
Either could technically be the sole cause, but in practice, technicians troubleshooting a compressor that clicks but won't start commonly find both the start relay and run capacitor have failed together — they sit on the same terminals under the same electrical stress every time the compressor cycles. Replacing both at once avoids having to open the compressor compartment a second time if the remaining original part fails shortly after.
I hear a repeated clicking sound from the back of my refrigerator, but it's not cooling. Is this the kit I need?
Yes, this is a textbook symptom for this exact pair of components. The clicking is the sound of the relay repeatedly attempting to engage the compressor's start winding and failing, often because the run capacitor isn't providing the boost the compressor needs to actually get moving. If both compartments are also warm, that confirms the compressor isn't starting at all.
Why doesn't this listing state a single voltage rating for the capacitor?
We found genuinely conflicting information across manufacturer-facing sources for this specific capacitor — some list it at 120V, others at 250V — and we'd rather flag that honestly than publish a number we can't fully verify. Before installing, check the rating printed directly on your original capacitor's body, and contact our support team if you'd like help confirming the correct value for your model.
My refrigerator stopped suddenly during normal operation. Could this kit be the cause?
Yes, a failing run capacitor or start relay can cause a refrigerator to stop suddenly, not just fail to start from cold. If your unit was running fine and then abruptly stopped cooling, checking these two components at the compressor is a reasonable next step alongside checking for tripped breakers or other obvious causes.
Is this an OEM or aftermarket kit?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM kit, but each component is manufactured to match the electrical specifications and terminal fit of the original 297259515 start relay and 297286803 run capacitor used in compatible Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10350564 Refrigerator Run Capacitor Replaces WPW10350564
The XPARTCO W10350564 is an aftermarket replacement compressor run capacitor compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Roper, Admiral, Ikea, and Kenmore refrigerators and freezers. The run capacitor is a small but critical electrical component mounted near the compressor at the back of the refrigerator — it delivers a phase-shifted power boost that helps the compressor motor start at the beginning of each cooling cycle, and supports smooth, efficient motor operation while the compressor runs. When the capacitor fails — typically from dielectric breakdown, age, heat, or moisture intrusion — the compressor may fail to start, hum without starting, kick on and off repeatedly, or cause inconsistent cooling throughout the refrigerator.
Rated 12 µF (MFD) ±5% capacitance, 180VAC, 50/60Hz. This capacitor works together with the compressor start relay/start device — the two components are frequently replaced together, since a failed capacitor often stresses the relay and vice versa. It directly replaces WPW10350564, W10350564, AP6020176, PS11753490, EAP11753490, and 2683570. This is one of the most cost-effective refrigerator repairs — a failed run capacitor mimics symptoms of a failed compressor (a far more expensive repair), so testing and replacing the capacitor first can save hundreds of dollars. Installs in about 15 minutes with basic hand tools.
Quick Answer
The XPARTCO W10350564 Refrigerator Run Capacitor fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore refrigerators and freezers where the compressor won't start, hums without starting, kicks on and off, or the fridge/freezer is too warm with inconsistent cooling. 12 µF (MFD) ±5%, 180VAC, 50/60Hz. Replaces WPW10350564, AP6020176, PS11753490, EAP11753490, 2683570. Often replaced together with the compressor start relay. A 15-minute repair that can save you from misdiagnosing a "failed compressor."
Common Problems This Part Fixes
Compressor won't start — no power boost from the failed capacitor
Compressor hums or clicks but doesn't start running
Compressor kicks on and off repeatedly (short cycling)
Refrigerator and freezer too warm — cooling cycles not completing
Fridge too warm while freezer seems okay — weak compressor operation
Noticeable humming sounds from the back of the refrigerator
Inconsistent cooling and variable temperatures inside the refrigerator
Refrigerator will not start at all
Capacitor visibly bulged, leaking, or burned
Capacitance test reads significantly off from 12 µF
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This run capacitor directly replaces the following OEM and cross-reference part numbers:
WPW10350564, W10350564, PD00030179, EAP11753490, AP6020176, AWP50050, PS11753490.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This run capacitor is compatible with select refrigerators and freezers from the following brands:
Whirlpool refrigerators — French door, side-by-side, and bottom-mount models (including WRX735SDBM00 and related WRX/WRF series)
Maytag refrigerators (select models)
KitchenAid refrigerators (select models)
Jenn-Air refrigerators (select models)
Amana refrigerators (select models)
Magic Chef refrigerators (select models)
Roper refrigerators (select models)
Admiral refrigerators (select models)
Ikea refrigerators (select Whirlpool-built models)
Kenmore / Sears refrigerators (select Whirlpool-built models)
Also fits compatible upright and chest freezers on the Whirlpool platform
Note: The run capacitor works together with the compressor start relay/start device. When one fails, the other has typically been stressed by the same electrical events — many repair scenarios call for replacing both at the same time since both are accessible in the same location and the combined parts cost is still far below a service call. Always verify your model number before ordering.
Key Features
Compressor run capacitor — delivers the phase-shifted power boost that starts the compressor motor and supports smooth operation during cooling cycles
Rated 12 µF (MFD) capacitance with ±5% tolerance — precise match to OEM electrical specifications
180VAC, 50/60Hz rating for compatible refrigerator compressor circuits
Resolves "compressor won't start," "humming but not starting," "short cycling," and "too warm" symptoms when caused by capacitor failure
A cost-effective first repair — failed capacitors commonly mimic the symptoms of a far more expensive failed compressor
Replaces WPW10350564, AP6020176, PS11753490, EAP11753490, and 2683570
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Roper, Admiral, Ikea, and Kenmore refrigerators and freezers
Often replaced together with the compressor start relay/start device as a paired repair
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in about 15 minutes with basic hand tools
Product Specifications
Part Number
W10350564
OEM Part Number
WPW10350564
Part Type
Refrigerator Compressor Run Capacitor
Condition
Aftermarket Replacement
Application
Refrigerators and Freezers (Whirlpool platform)
Capacitance
12 µF (MFD)
Tolerance
±5%
Voltage
180V AC
Frequency
50/60 Hz
Mounting Location
Near compressor, rear of refrigerator
Often Paired With
Compressor Start Relay / Start Device
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Roper, Admiral, Ikea, Kenmore
Installation Notes
⚠️ Capacitor Safety Warning — Stored Electrical Charge Capacitors store an electrical charge even after the refrigerator is unplugged. Before handling the old capacitor, discharge it safely: with the refrigerator unplugged, touch the blade of an insulated-handle screwdriver across both capacitor terminals simultaneously to short them together (you may see or hear a small spark — that's the stored charge dissipating). Never touch the capacitor terminals with bare hands before discharging. If you're not comfortable with this step, have the repair done by a qualified appliance technician.
⚠️ Unplug Refrigerator Before Starting — Wear Work Gloves Unplug the refrigerator and pull it away from the wall to access the rear. Safely store any food that could spoil if the repair takes longer than expected. Wear work gloves to protect your hands. The run capacitor is located near the compressor at the bottom rear of the refrigerator, typically behind a lower rear access panel. Remove the screws holding the access panel and set it aside. Locate the capacitor — a small rectangular or oval component connected to the compressor's start relay/start device by wire terminals. Photograph the wire connections before disconnecting anything. Discharge the old capacitor before touching the terminals (see the safety warning above). Disconnect the wire terminals from the old capacitor — note which wire goes to which terminal. Release the capacitor from its mounting clip or bracket. Install the new W10350564 capacitor in the same position, secure the mounting clip, and reconnect the wires to the same terminals as photographed. While the panel is open, inspect the start relay/start device on the side of the compressor — if it rattles when shaken, shows burn marks, or has corroded terminals, replace it at the same time. Reinstall the rear access panel, push the refrigerator back into place, plug it in, and listen for the compressor to start smoothly within a few minutes. Allow several hours for the refrigerator to return to its set temperature. Tools needed: Phillips screwdriver, 1/4" nut driver, insulated-handle flathead screwdriver (for discharging), needle-nose pliers, work gloves.
Frequently Asked Questions
How do I know if the run capacitor has failed and not the compressor?
This is the key question — because a failed $15–30 capacitor produces nearly identical symptoms to a failed $300+ compressor. Signs pointing to the capacitor: the compressor hums or clicks but won't start; the compressor tries to start, runs briefly, then shuts off (short cycling); or the refrigerator gradually stopped cooling with humming from the rear. To test: unplug the refrigerator, discharge the capacitor, disconnect it, and measure it with a multimeter that has a capacitance setting — a healthy capacitor reads close to 12 µF (within ±5%). A reading far off, zero, or infinite confirms the capacitor has failed. Visual signs like bulging, leaking, or burn marks also confirm failure. Given the low cost, replacing the capacitor (and start relay) first is the standard diagnostic approach before condemning the compressor.
Should I replace the start relay at the same time?
Yes, it's strongly recommended. The run capacitor and the compressor start relay/start device work together in the compressor's starting circuit — the relay switches power to the start winding while the capacitor provides the phase-shifted boost. When one fails, the other has typically been stressed by the same electrical events (voltage spikes, overheating, repeated failed start attempts). Both components are inexpensive, mounted in the same location on or near the compressor, and accessible in the same repair session. A quick relay check: with the refrigerator unplugged, remove the relay and shake it — if it rattles, the internal components have failed and it needs replacement.
Why does the capacitor need to be discharged before handling?
Capacitors store electrical energy — that's their job. Even after the refrigerator is unplugged, the capacitor can hold a charge capable of delivering a painful (and potentially dangerous) shock when you touch both terminals. Before handling, always discharge the capacitor by shorting both terminals together with the blade of an insulated-handle screwdriver — touch the metal blade across both terminals at once and hold for a second or two. You may see a small spark as the charge dissipates; that's normal. After discharging, the capacitor is safe to handle. This takes five seconds and eliminates the shock risk entirely.
What's the difference between a run capacitor and a start capacitor?
Both assist the compressor motor but in different phases of operation. A start capacitor delivers a large, brief boost only during the initial moment of motor startup, then is switched out of the circuit. A run capacitor — like the W10350564 — stays in the circuit continuously while the motor runs, providing an ongoing phase shift that improves the motor's running efficiency and torque. Household refrigerators on the Whirlpool platform typically use a run capacitor working alongside the start relay/start device. Match the replacement to your original: the W10350564 is a 12 µF, 180VAC run capacitor, and the capacitance rating must match for correct compressor operation.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical specifications (12 µF ±5%, 180VAC, 50/60Hz), terminal configuration, and compressor-support function of the original WPW10350564/W10350564 run capacitor used in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore refrigerators and freezers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5304532557 Refrigerator Genuine Evaporator Motor
Replaces Part Numbers: 5304532557, 242077707, AP7194947, PS16745551.
Description: This Part is a Genuine OEM refrigerator evaporator fan motor compatible with specific Electrolux, Frigidaire refrigerator models. The fan motor is a vital component of your refrigerator. It is designed to maintain cold temperatures by circulating air through the fresh food compartments. By doing so, it ensures uniform cooling within the refrigerator. This helps to prevent warm spots that can lead to frost build-up.
XPARTCO WR60X10220 Refrigerator Condenser Fan Motor
The XPARTCO WR60X10220 is an aftermarket replacement condenser fan motor for GE frost-free refrigerators with a condenser coil. This motor lives in the compressor/machine compartment at the back or bottom of the refrigerator. Whenever the compressor runs, this fan runs right along with it, circulating air through the refrigerator's grille to cool both the compressor and the condenser coils as they work. It also plays a secondary role in helping evaporate excess water that collects in the drain pan.
Because the condenser fan cools the mechanical side of the refrigeration system rather than circulating cold air to your food, a failing motor tends to affect the whole refrigerator's cooling capacity rather than just one compartment. The harness and plug extend approximately 8" from the motor body. Common failure causes include worn motor bearings, dust and debris buildup around the coils restricting airflow, and general electrical wear over time. Symptoms include a refrigerator that runs warm overall, a hot cabinet area near the back or bottom of the unit, a squealing or grinding noise, or the compressor running constantly as it struggles to shed heat. It directly replaces AP4298602, 1257132, AH1766247, EA1766247, PS1766247, WR60X10133, WR60X10171, WR60X10192, and SM10220.
Quick Answer
The XPARTCO WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, Kenmore, Haier, Monogram, and Café frost-free refrigerators with a hot cabinet area, squealing or grinding noise, or a fridge running warm overall. Harness and plug extend approximately 8" from the motor. Replaces AP4298602, 1257132, AH1766247, EA1766247, PS1766247, WR60X10133, WR60X10171, WR60X10192, SM10220. This cools the compressor and condenser coils — a different part and symptom pattern than an evaporator fan, which only affects internal air circulation to the food compartments.
Common Problems This Part Fixes
Refrigerator running warm overall, in both the fresh food and freezer compartments
Hot cabinet area noticeable near the back or bottom of the refrigerator
Squealing, grinding, or buzzing noise coming from the compressor compartment
Refrigerator running constantly as the compressor struggles to shed heat
Water pooling or not evaporating properly in the drain pan
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Excessive dust or debris buildup visible around the condenser coils and fan
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with select GE, Hotpoint, and RCA frost-free refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform.
Note — condenser fan, not evaporator fan: This motor cools the compressor and condenser coils in the machine compartment at the back or bottom of the refrigerator. It is a completely different part from an evaporator fan motor (such as our WR60X10185 or WR60X10318 listings), which sits behind the freezer's rear panel and circulates cold air to the food compartments. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Aftermarket replacement condenser fan motor — draws air across the condenser coils and compressor to remove system heat
Resolves "hot cabinet area," "squealing or grinding noise," "runs warm overall," and "runs constantly" symptoms caused by fan failure
Also helps evaporate excess water collecting in the drain pan
Harness and plug extend approximately 8" from the motor body
Sturdy construction built for long-term reliable performance
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WR60X10133, WR60X10171, WR60X10192, AP4298602, 1257132, AH1766247, EA1766247, PS1766247, and SM10220
Aftermarket replacement built to OEM-equivalent quality standards
DIY-friendly repair — typically under 30 minutes
Product Specifications
Part Number
WR60X10220
OEM Part Number
WR60X10220
Part Type
Refrigerator Condenser Fan Motor
Condition
Aftermarket Replacement
Brand
GE
Location
Compressor/machine compartment (back or bottom of cabinet)
Function
Cools the condenser coils and compressor; aids drain pan evaporation
Dimensions
2-1/2"H x 4"W x 11"D
Harness/Plug Length
Approx. 8" from motor
Repair Difficulty
Easy — under 30 minutes
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, RCA, Kenmore, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting Shut off power at the circuit breaker or fuse box, then pull the refrigerator away from the wall and disconnect the power cord from the outlet. Wear work gloves. Remove the condenser fan motor cover, typically held on by two screws, to access the motor. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces symptoms similar to a failing motor and costs nothing to rule out. Photograph the wiring and the fan blade's position before disconnecting anything. Disconnect the power wire and the ground wire from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. If the old fan blade is seized onto the motor shaft, a firm, sudden strike (rather than steady pressure) will typically break the blade loose from the shaft without damaging the plastic blade, so it can be reused on the new motor. Mount the new WR60X10220 in the same position, reconnect the power and ground wires, and confirm the blade spins freely by hand without contacting the housing before reinstalling the fan cover. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned and any hot cabinet area or noise has resolved. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My refrigerator has a hot spot on the cabinet and runs warm overall. Is this the right part?
Yes, this is a classic symptom pair for a failing condenser fan motor. Without proper airflow across the condenser coils and compressor, heat builds up in the machine compartment (producing that hot cabinet area) while the whole refrigeration cycle loses efficiency, which shows up as both compartments running warmer than normal rather than just one.
The old fan blade is stuck on the motor shaft. How do I remove it without breaking it?
A gentle, steady pull often won't budge a seized blade, but a firm, sudden strike to the blade (rather than continuous pressure) will typically pop it loose from the metal shaft without damaging the plastic blade itself, so you can reuse it on the new motor if a blade isn't included. Work carefully and support the blade so it doesn't fall and crack once it releases.
Could dirty condenser coils cause the same symptoms as a bad fan motor?
Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix.
Does this fan also affect my drain pan?
Yes, indirectly. In addition to cooling the compressor and condenser coils, this fan helps evaporate excess water that collects in the drain pan beneath the refrigerator. If the fan has failed, you may notice water pooling or not evaporating as it normally would, in addition to the more obvious cooling and noise symptoms.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the mounting configuration, dimensions, and airflow performance of the original WR60X10220 condenser fan motor used in compatible GE, Hotpoint, RCA, Kenmore, Haier, Monogram, and Café refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WR17X11653 Refrigerator Dispenser Ice Door Flapper
The XPARTCO WR17X11653 is an aftermarket replacement ice door flapper, also sold as the dispenser door assembly, ice chute door or door recess assembly, for GE, Hotpoint and Kenmore side-by-side refrigerators, replacing GE part WR17X11653. It sits in the ice chute opening, seals the freezer against warm room air, and opens when the dispenser lever is pressed so ice can reach your glass.
If the door is cracked, warped, or its gasket no longer seals, warm air gets into the chute and the dispenser suffers. Check your model number before ordering, as the kit may include more than one piece.
Quick Answer
The XPARTCO WR17X11653 Ice Door Flapper replaces the ice chute door on a compatible GE, Hotpoint or Kenmore refrigerator when it is cracked, warped, or no longer seals. Classic symptoms: door sweating, frost buildup at the chute, or ice not dispensing.
Common Problems This Part Fixes
Ice dispenser door sweating
Frost buildup around the ice chute
Ice not dispensing
Cracked, warped or damaged ice door
Worn rubber gasket leaking air into the freezer
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice door flapper directly replaces the following part numbers:
WR17X11653, WR17X3093, WR17X3492, AGE28222, AH964304, AP3672582, EA964304, EAP964304, PD00001157, PS964304
If your old part shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This ice door flapper is listed for GE, Hotpoint and Kenmore side-by-side refrigerators, including these examples:
GE TPH21PRSABB, TPH21PBSAWW, TFX20JRSBAD
GE DSE26JSEBCSS, DSF25KGTABG, DSF26DHWABB, CSK28DRBBAA
Kenmore 3639544313, 3639537713, 3639542623
Note: The models above are a small sample. One retailer lists this part for over 1,000 models. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the GE WR17X11653 ice door flapper
Seals the ice chute opening against warm room air
Opens when the dispenser lever is pressed to release ice
Replaces a cracked, warped or leaking ice door
Product Specifications
Part Number
XPWR17X11653
OEM Part Number
WR17X11653
Part Type
Refrigerator Dispenser Ice Door Flapper
Condition
Aftermarket Replacement
Application
Select GE, Hotpoint and Kenmore Side-by-Side Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator and move perishable food to a cooler before you begin. Wear work gloves. A Phillips screwdriver and a small flat-blade screwdriver are typically needed. No installation instructions are included with the part, so keep your model's parts diagram handy and note how the old door and any springs or pieces come apart before removing them. Install the new door the same way, then restore power and test the dispenser.
Frequently Asked Questions
What does the ice door flapper do?
It seals the ice chute opening to keep warm room air out of the freezer, and it opens when you press the dispenser lever so ice can drop into your glass.
How do I know if my ice door needs replacing?
Look for a cracked or warped door, a damaged rubber gasket, door sweating, or frost buildup around the chute. Ice that won't dispense can also point to the door.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace GE part WR17X11653. If you specifically need a genuine GE part, contact our support team.
Will this fit my refrigerator?
It is listed for a large number of GE, Hotpoint and Kenmore side-by-side models, but the list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
MJU62070602 Genuine LG OEM Refrigerator Water Line
Plastic tube, 5/16" - 79 inches in length
Replaces Part Number: MJU62070602, 5210JA3004R, 5210JA3004U, MJU62070606, 2676818, 5210JA3004B, 5210JA3029U, AH3536013, EA3536013, MJU62070601, MJU62070611, MJU62070615, AP4681126, PS3536013.
Water tubing MJU62070602 is an original equipment manufacturer (OEM) part that fits some Kenmore, Kenmore Elite and LG refrigerators. Water tubing MJU62070602 supplies water to refrigerator components that require water such as the ice maker and water dispenser. Replaces original refrigerator water tubing part numbers 5210JA3004U, 5210JA3029U, MJU62070601 and MJU62070606. Fits some Kenmore and Kenmore Elite 795-series refrigerators. Also fits some LG refrigerators in these series: LFD, LFX, LMX, LRFD, LRSC and LSC.
