XPARTCO 691366 Dryer Idler Pulley Assembly Replaces WP691366
The XPARTCO 691366 is an aftermarket replacement dryer idler pulley assembly compatible with a wide range of Whirlpool-family dryers — particularly models with the lint filter on top — including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef, and Norge. The idler pulley assembly is a spring-tensioned arm and wheel that presses against the drum drive belt to maintain correct belt tension as it wraps around the drum and motor pulley. Without proper tension, the belt slips off the motor pulley, causing the drum to stop spinning. A worn idler pulley bearing also causes squealing, squeaking, or thumping noises during operation.
This is a complete idler arm and pulley assembly — it includes both the spring arm and the wheel, and mounts directly to the existing bracket in the dryer. Overall dimensions are 6"L x 1-5/8"W x 3-7/8"H with a 1-7/8" diameter pulley wheel. It replaces older Teflon friction-style idler pulleys and provides a smoother, longer-lasting ball-bearing wheel. It directly replaces WP691366, 691366, 239477, 337116, 337407, 3394332, 347034, 347226, 4319391, 688166, W10612905, AP6010582, PS11743765, and over 20 additional cross-reference numbers. Often replaced together with the drum belt (341241) and drum support rollers (349241T) as the 4392065 maintenance kit. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 691366 Dryer Idler Pulley Assembly fixes Whirlpool-family dryers that are squealing, thumping, or where the drum stops spinning because the belt has lost tension. Complete arm and pulley assembly. 6"L x 1-5/8"W x 3-7/8"H overall, 1-7/8" pulley diameter. Replaces older Teflon friction pulleys with ball-bearing wheel. Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, and more. Replaces WP691366, 239477, 337116, 3394332, 347034, AP6010582, PS11743765. Often replaced with 341241 belt and 349241T rollers.
Common Problems This Part Fixes
Drum not spinning — belt has lost tension and slipped off the motor pulley
Loud squealing or squeaking noise during the drying cycle — worn idler pulley bearing
Thumping or clunking noise as the pulley wheel wobbles on a worn bearing
Belt repeatedly slipping or falling off after being reinstalled
Grinding noise from the idler pulley area — bearing fully failed
Dryer drum spinning intermittently due to inconsistent belt tension
Idler pulley arm visibly cracked, broken, or wheel no longer spinning freely
Replaces Part Numbers
This idler pulley assembly directly replaces the following OEM and cross-reference part numbers:
WP691366, 691366, 239477, 26000691366, 337116, 337407, 337510, 3388345, 338946, 3394332, 347034, 347226, 347277, 4319391, 688166, 691366BULK, 8207, 99989677, DE412, K35-163, W10612905, WP691366VP, AWP48059, EAP11743765, AP6010582, PD00002256, PS11743765.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley assembly is compatible with select gas and electric dryers from the following brands — particularly models with the lint filter on top:
Whirlpool dryers (gas and electric — WED, WGD, LE, LG, and related series with top lint filter)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers (gas and electric)
Amana dryers
KitchenAid dryers
Roper dryers
Crosley dryers
Estate dryers
Inglis dryers
Admiral dryers
Magic Chef dryers
Norge dryers
Note: The 691366 idler pulley is for older Whirlpool-family dryers with the lint filter on top. Newer Whirlpool dryers with the lint screen inside the door use the W10837240 idler pulley arm assembly instead. Always verify your model number before ordering.
Key Features
Complete idler arm and pulley assembly — includes both the spring-tensioned arm and the pulley wheel
Maintains correct drive belt tension so the belt grips the drum and motor pulley without slipping
Redesigned ball-bearing pulley wheel replaces older Teflon friction-style pulleys for longer service life and quieter operation
Overall dimensions: 6"L x 1-5/8"W x 3-7/8"H; pulley wheel diameter: 1-7/8"
Plastic arm with metal shaft and ball-bearing pulley wheel
Replaces WP691366, 239477, 337116, 3394332, 347034, AP6010582, and over 30 additional cross-reference numbers
Compatible with 12 major appliance brands on the Whirlpool top-lint-filter platform
Often replaced together with the drum belt (341241) and drum rollers (349241T) — all three included in the 4392065 maintenance kit
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
691366
OEM Part Number
WP691366
Part Type
Dryer Idler Pulley Assembly (Arm and Wheel)
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers (lint filter on top models)
Overall Dimensions
6"L x 1-5/8"W x 3-7/8"H
Pulley Wheel Diameter
1-7/8 inches
Material
Plastic arm / Metal shaft / Ball-bearing pulley wheel
Color
Black / White
Includes
Complete idler arm and pulley assembly
Often Replaced With
341241 Drum Belt, 349241T Drum Rollers (4392065 kit)
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Crosley, Estate, Inglis, Admiral, Magic Chef, Norge
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the lint screen and unscrew the screws inside the lint screen housing. Use a putty knife to release the top panel spring clips and lift the top panel. Remove the front panel to fully access the drum drive components. Release belt tension by pushing the idler pulley arm toward the motor and sliding the belt off. Note how the belt is routed before removing — take a photo. Unclip or unscrew the old idler pulley assembly from its mounting bracket. Install the new 691366 idler pulley in the same position. Re-route the belt around the drum (ribbed side in), under the idler pulley, and around the motor pulley, then release the idler arm to create tension. Reassemble the front and top panels, restore power, and run a test cycle. Tip: while the dryer is open, inspect and replace the drum belt (341241) and drum support rollers (349241T) if worn. Tools needed: Phillips screwdriver, 1/4" or 5/16" nut driver, putty knife.
Frequently Asked Questions
What does the idler pulley do?
The idler pulley is a spring-loaded arm and wheel assembly that presses against the drive belt between the drum and the motor pulley, keeping the belt under constant tension. This tension is what allows the belt to grip both the drum and the motor pulley without slipping as the motor spins. Without proper tension — or with a pulley bearing that has failed — the belt slips, the drum stops spinning, and the dryer produces heat but does not tumble clothes. A worn bearing also creates the high-pitched squealing sound that is the most common sign of idler pulley failure.
What is the difference between 691366 and WP691366?
These are the same idler pulley assembly. WP691366 is the updated Whirlpool OEM part number that superseded the original 691366. The W10612905 is also a cross-reference for the same assembly. This aftermarket replacement is compatible with all three numbers.
What is the difference between 691366 and W10837240?
Both are Whirlpool dryer idler pulley assemblies, but for different dryer generations. The 691366 (WP691366) is used on older Whirlpool-family dryers with the lint filter on top of the dryer. The W10837240 is a larger, redesigned idler arm and bracket assembly used on newer Whirlpool-family dryers with the lint screen inside the door. They are not interchangeable. Always verify your model number to confirm which idler pulley is correct for your dryer.
Should I also replace the belt and drum rollers at the same time?
Yes — since the dryer must be disassembled to replace the idler pulley, this is the ideal time to also inspect and replace the drum belt (341241) and rear drum support rollers (349241T). All three parts are part of the same drum drive system and wear at similar rates. The 4392065 maintenance kit includes all three together and is the recommended approach for a complete drum drive repair — one teardown covers everything.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal with a ball-bearing pulley wheel to match the dimensions and performance of the original WP691366 idler pulley assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC93-00634A Dryer Idler Pulley
The XPARTCO DC93-00634A is an aftermarket replacement idler pulley assembly compatible with a wide range of Samsung dryers. The idler pulley rides against the drive belt and keeps it under proper tension as it wraps around the drum and motor pulley. Over time, the pulley wheel can wear, crack, or seize on its shaft, or the spring-loaded tensioner arm can bend or break, causing the belt to lose tension.
When this part fails, the dryer commonly won't spin at all even though the motor runs, makes a loud noise from the drive area, or the belt goes slack and starts slipping. It directly replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Installs in 30 minutes to 2 hours depending on how much disassembly your model requires.
Quick Answer
The XPARTCO DC93-00634A Dryer Idler Pulley fixes Samsung dryers that won't spin the drum even though the motor runs, make a loud noise from the drive belt area, or have a loose/slipping belt. Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601. Classic symptom: motor hums and runs, but the drum doesn't turn — "no spin, no start."
Common Problems This Part Fixes
Dryer motor runs but the drum doesn't spin ("no spin, no start")
Loud noise or rattling coming from the drive belt/motor area
Drive belt slipping, loose, or off-track
Visible cracks, wear, or seizing on the pulley wheel
Bent or broken tensioner arm/spring
Squeaking noise from the pulley as it rotates
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This idler pulley directly replaces the following OEM and cross-reference part numbers:
DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with a wide range of Samsung dryers, including:
Samsung DV337AEG/XAA-0000
Samsung DV45H7000EW/A2-0000
Samsung DV45K6200EZ/A3
Samsung DV203AEW/XAA-0000, DV203AGS, and related models
Note: This idler pulley is specific to the Samsung drive belt platform and does not fit LG, Whirlpool, GE, or other brands, which use different pulley designs. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement Samsung dryer idler pulley assembly
Resolves "no spin, no start," "loud noise," and "loose/slipping belt" symptoms
Maintains proper belt tension as the belt wraps around the drum and motor pulley
Spring-loaded tensioner arm matches original design for correct belt tension
Replaces DC93-00634A, DC97-07509B, DC61-01230B, DC96-00882B, DC96-00882C, 4455850, AP6038887, ASM34631, EAP11771601, PD00032419, PS11771601
Compatible with a wide range of Samsung dryer models
Aftermarket replacement built to OEM-equivalent quality standards
Exact-fit design — no modification needed for installation
Product Specifications
Part Number
XPDC93-00634A
OEM Part Number
DC93-00634A
Part Type
Dryer Idler Pulley Assembly
Condition
Aftermarket Replacement
Function
Maintains drive belt tension
Application
Samsung Dryer Drive Belt System
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Remove the front panel and/or top panel as needed to access the drum and drive belt (access point varies by model). Photograph the belt routing before removing anything. Relieve tension on the drive belt by pressing the idler pulley toward the motor, then slip the belt off the pulley and motor shaft. Remove the mounting screw or clip holding the idler pulley bracket in place and remove the old pulley assembly. Install the new DC93-00634A pulley in the same position and secure it. Route the new belt back around the drum and motor pulley, using the idler pulley to apply tension, matching your photos of the original routing. Reassemble any panels removed for access, restore power, and run a test cycle to confirm the drum spins smoothly and quietly. Tools needed: Phillips or nut driver, putty knife (for panel clips, if applicable).
Frequently Asked Questions
My dryer's motor runs but the drum won't spin — is this the part?
This is the classic "no spin, no start" symptom of a failed idler pulley or a broken drive belt. If the pulley wheel is cracked, seized, or the tensioner arm is bent or broken, the belt loses tension and can no longer transfer power from the motor to the drum. Inspect the belt for damage as well, since a broken belt often accompanies a worn idler pulley.
Do I need to replace the drive belt at the same time?
Not necessarily, but it's worth inspecting closely while you have the drum accessible. If the idler pulley failed due to age or wear, the belt has often experienced similar stress and may be worn, glazed, or close to failing itself. Many technicians replace both together to avoid a repeat repair.
Will this fit my LG or Whirlpool dryer?
No — this idler pulley is specific to the Samsung drive belt platform. LG, Whirlpool, GE, and other brands use different idler pulley and belt tensioning designs that are not interchangeable with this part. Confirm your appliance model number before ordering.
How long does this repair typically take?
Most installers report 30 minutes to 2 hours depending on how much disassembly your specific model requires to access the belt and pulley. Front panel removal is usually the more time-consuming part; the pulley swap itself is quick once accessed.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
EXP652 Dryer Belt and Idler Pulley Replaces WPW10112954, 279640
The EXP652 is an aftermarket replacement drum belt and idler pulley kit for Whirlpool and Maytag electric and gas dryers, and also fits select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. These two components work together: the drum belt circles the drum and attaches to the motor pulley to transmit rotation, while the idler pulley rides against the belt to maintain proper tension so it doesn't slip or sag during operation.
Because these two parts share the same drive path and tend to wear on a similar timeline, they're commonly sold and replaced together. Symptoms of failure include the dryer not starting, the drum not tumbling or spinning, and noise issues such as squealing or rubbing during operation. It directly replaces W10112954, WPW10112954, AP6015116, PS11748388 (drum belt), and AP3094197, PS334244, 279640, and 3388674 (idler pulley).
Quick Answer
The EXP652 Dryer Belt and Idler Pulley fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric and gas dryers that won't start, won't tumble or spin, or make squealing/rubbing noise. Includes drum belt and idler pulley. Replaces W10112954, WPW10112954, AP6015116, PS11748388, AP3094197, PS334244, 279640, 3388674. These two parts wear together — replacing both at once, rather than just the one that failed, helps avoid reopening the dryer again soon after.
What's In The Kit
Component
Replaces
Function
Drum Belt
WPW10112954 / W10112954
Circles the drum and attaches to the motor pulley to transmit rotation and keep the drum tumbling.
Idler Pulley
279640
Rides against the belt to maintain proper tension so it doesn't slip or sag.
Common Problems This Kit Fixes
Dryer won't start
Drum won't tumble or spin
Squealing or rubbing noise during operation
Belt slipping or sagging, causing inconsistent tumbling
Extended or inconsistent drying times
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer belt and idler pulley kit directly replaces the following OEM and cross-reference part numbers:
Belt Replaces Part Numbers
WPW10112954, W10112954, 1447719, AP6015116, AWP48873, EAP11748388, PD00003553, PS11748388
Idler Pulley Replaces Part Numbers
279640, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, AWP39098, PD00002356, EAP334244, AP3094197, PS334244.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This kit is compatible with select Whirlpool electric and gas dryers, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers built on the Whirlpool platform, including model numbers such as MED8000AG0, MED8000AW0, MGD6000XW0, MGD6000XW1, MGD6000XW2, MGD8000AG0, MGD8000AG1, MGD8000AW0, MGD8000AW1, 4KMEDC300BW0, 7MMGD0100TQ1, and MGD5500FC0.
Note: Whirlpool also uses a different idler pulley, W10837240, on other dryer models — this kit specifically pairs the WPW10112954 belt with the 279640 idler pulley. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement kit — drum belt and idler pulley in one purchase
Resolves "won't start," "won't tumble or spin," and "squealing/rubbing noise" symptoms
Restores smooth drum rotation with proper belt tracking and tension
Reduces noise and vibration from a worn belt or pulley
Direct drop-in replacement matching the original belt length and pulley mounting
Replaces W10112954, WPW10112954, AP6015116, PS11748388, AP3094197, PS334244, 279640, and 3388674
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric and gas dryers
Built to OEM-equivalent quality standards
Product Specifications
Part Number
EXP652
Set Contents
1x Drum Belt (replaces WPW10112954), 1x Idler Pulley (replaces 279640)
Condition
Aftermarket Replacement
Application
Whirlpool / Maytag Electric and Gas Dryers
Belt Length
Approx. 92-1/2"
Belt Profile
Flat, 5 ribs, 4 grooves
Related Idler Pulley
W10837240 (for other models, sold separately)
Repair Difficulty
Moderate — front/top panel and drum removal required
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — This Is A Bigger Repair Requiring Significant Disassembly Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the top and front panels of the dryer, then the drum, to access the belt and idler pulley. Remove the old drum belt from around the drum and motor pulley. Remove the old idler pulley from its mounting bracket. Install the new EXP652 idler pulley in the same position, making sure it spins freely by hand before continuing. Route and install the new drum belt correctly around the drum and motor pulley, matching the original path exactly, and re-tension it through the idler pulley. Reinstall the drum, then reassemble the front and top panels. Restore power and run a test cycle to confirm quiet, smooth operation with the drum tumbling normally and no squealing or rubbing noise. Tools needed: nut driver, Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer's motor runs but the drum won't turn. Is this the right kit?
Yes, this is the classic symptom addressed by a worn or broken drum belt, and since the idler pulley works together with the belt to maintain proper tension, replacing both at once addresses the most common causes of this problem in one repair.
Do I need to replace both parts, or just the one that failed?
You can replace just the failed component if you've confirmed which one is actually bad, but these two parts share the same drive path and tend to wear out around the same time — a worn pulley can accelerate belt wear, and a worn belt puts extra strain on the pulley. Replacing both together, since you'll already have the dryer largely disassembled for access, helps avoid a second teardown soon after.
Is this the same idler pulley as your other Whirlpool dryer belt kits?
Not necessarily — Whirlpool uses more than one idler pulley design across its dryer lineup. This kit specifically pairs the WPW10112954 belt with the 279640 idler pulley. Other kits may pair the same belt with a different pulley, such as W10837240, used on other models. Always confirm your full model number before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the belt length, rib pattern, and pulley design of the original WPW10112954 belt and 279640 idler pulley used in compatible Whirlpool, Maytag, and related electric and gas dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
5304511380 Replacement Dryer Drum Belt - Compatible with Frigidaire, Electrolux
Product Description
Ensure your dryer’s drum rotates smoothly with the 5304511380 Replacement Dryer Drum Belt. This replacement part is designed for select Frigidaire, Electrolux, and compatible dryers, connecting the motor to the drum to enable proper tumbling during drying cycles. It addresses issues like the drum not spinning, unusual noises, or failure to start, offering a cost-effective alternative to OEM parts with equivalent performance.
Note: Includes one dryer drum belt. Disconnect power before installation. Inspect the idler pulley and motor pulley for wear to prevent repeat failures. This is a replacement part designed to match OEM specifications.
Replaces part numbers: 5304511380, 4584320, PD00063076, EAP12176502, AP6261662, PS12176502.
Compatibility:
Compatible with models including but not limited to:
Frigidaire: FASE7073LW0, FFQE5000QW0, FARE4044MW0, FAQE7077KR0, FARE1011MW0, FFSE5115PA0
Electrolux: EIED50LIW0, EIMED60JIW0, EIMED55IIW0
Kenmore: 417.81122310, 417.91122310
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Frigidaire, Electrolux, and compatible Kenmore dryers.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires screwdriver, wrench, work gloves; typically installed in 20–40 minutes with YouTube video guidance.
🛡️ Effective Fixes: Resolves drum not spinning, noisy operation, or failure to start.
Product Specification
Part Number: XP5304511380
Component Type: Dryer drum belt
Material: Durable rubber
Mounting: Loops around drum, motor pulley, and idler pulley
Operating Conditions: Suitable for high-tension dryer drum systems
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Tip: Access the drum by removing the dryer’s top or front panel; thread the belt through the idler pulley and around the motor pulley, ensuring proper tension. Watch YouTube videos for step-by-step guidance. Check idler pulley and motor pulley for wear to avoid premature belt failure.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running smoothly today!
Add to cart now for a budget-friendly fix!
WP3363394 Genuine OEM Washer Drain Pump
The WP3363394 is a genuine Whirlpool OEM drain pump for direct-drive (no-belt) Whirlpool, Kenmore, Maytag, KitchenAid, Estate, Roper, Crosley, and Inglis top-load washers. This pump mounts directly to the washing machine's motor using two clips, and removes water from the tub during the drain portion of the wash cycle. It has one large port and one small port for its hose connections.
Over time, the pump can become locked up internally, or a small object can get lodged inside and clog it, preventing normal drainage. Symptoms of a failing pump include the washer not draining at all, or a small leak appearing near the front of the washer from a defective pump. A DIY replacement typically takes about 10 to 15 minutes. It directly replaces 3363394, WP3363394VP, AP6008107, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 3352493, 3352292, 3352293, 62516, 63347, 64076, 8235, PS11741239, EAP11741239, and 1195967.
Quick Answer
The WP3363394 Genuine OEM Washer Drain Pump fixes direct-drive Whirlpool, Kenmore, Maytag, KitchenAid, Estate, Roper, Crosley, and Inglis top-load washers that aren't draining, or are leaking near the front of the unit. Mounts to the motor with two clips; one large port, one small port. Replaces 3363394, WP3363394VP, AP6008107, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 3352493, 3352292, 3352293, 62516, 63347, 64076, 8235, PS11741239, EAP11741239, 1195967. This pump is specifically for direct-drive (no-belt) washers — confirm your washer's drive type before ordering.
Common Problems This Part Fixes
Washer not draining — standing water left in the tub after a cycle
Small leak near the front of the washer
Pump that has locked up or become clogged with a small object
Cycle stalling at the drain step and never advancing
Unusual noise coming from the pump during the drain phase
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drain pump directly replaces the following OEM and cross-reference part numbers:
WP3363394, 3363394, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 62516, 63347, 64076, 8235, AP6008107, AWP47721, EAP11741239, PD00002328, PS11741239
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump is compatible with select direct-drive Whirlpool top-load washers, and also fits select Kenmore, Maytag, KitchenAid, Estate, Roper, Crosley, and Inglis washers built on the Whirlpool platform, including model numbers such as WET4024EW, LTE5243DQ, LTE5243DQA, LTG5243DQ, CAM2742TQ, MAT14PDAWW, LSW9750PQ3, TAWS850PQ2, LSR7233EQ, and Kenmore 110.26812690 and 110.28522701.
Note: This pump is designed specifically for direct-drive (no-belt) washers. Belt-drive models use a different pump design. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pump your washer needs.
Key Features
Genuine Whirlpool OEM part — factory-specified pump design for direct-drive washers
Mounts directly to the motor with two clips
Resolves "not draining" and "leaking near the front of the washer" symptoms caused by pump failure
One large port, one small port for hose connections
Factory Certified Part built to Whirlpool's engineering specifications
Direct drop-in replacement — matches the original mounting and hose connections
Replaces 3363394, WP3363394VP, AP6008107, 21024, 3296, 3348014, 3348015, 3348215, 3352492, 3352493, 3352292, 3352293, 62516, 63347, 64076, 8235, PS11741239, EAP11741239, and 1195967
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Estate, Roper, Crosley, and Inglis top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
DIY-friendly repair, typically 10 to 15 minutes
Product Specifications
Part Number
WP3363394
Part Type
Washer Drain Pump
Condition
Genuine OEM
Brand
Whirlpool
Application
Direct-Drive (No-Belt) Top-Load Washers
Mounting
Direct to motor, secured with two clips
Ports
1 large port, 1 small port
Companion Clip
WP8546127 (recommended addition)
Repair Difficulty
Easy — 10 to 15 minutes
Quantity
1 drain pump
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Estate, Roper, Crosley, Inglis
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the two screws securing the top panel of the washer, then carefully lift off the panel and set it aside. Disconnect the hoses connected to the drain pump by squeezing the clamps and pulling them off, then disconnect the wires from the terminals. Using a Phillips-head screwdriver, unscrew the four screws around the old pump and carefully lift it out. Take the new WP3363394 and place it into the same position as the old one, securing it with the screws. Attach the hoses back onto their ports and plug the wires back into the terminals. Reinstall the top panel and secure its screws. Restore power and run a test cycle to confirm the washer drains completely with no leaks. Tools needed: multi-screwdriver, standard pliers, work gloves.
Frequently Asked Questions
My washer isn't draining. Is this the right pump?
Yes, this is the most direct symptom of a failed drain pump. If the pump has locked up internally or become clogged by a small object, water won't be removed from the tub during the drain phase, leaving standing water behind after the cycle finishes.
How do I know if my washer is direct-drive or belt-drive?
This pump is specifically designed for direct-drive washers, which don't use a belt to connect the motor to the transmission. If you're not sure which type your washer uses, check your model number against the compatibility list, or contact our support team for confirmation before ordering, since belt-drive washers require a different pump design.
Should I replace the mounting clips at the same time?
It's worth considering, especially if your original clips show wear or damage. The companion clip, WP8546127, is commonly recommended alongside this pump since it secures the pump to the motor, and replacing a worn clip at the same time can help ensure a secure fit for the new pump.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original pump design, port configuration, and motor mounting of the drain pump originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
6 Pack - XPARTCO 6602-001655 Dryer Drum Belt – Compatible with Samsung & Kenmore Dryers
Product Description
Restore proper drum rotation and reliable drying performance with the XPARTCO 6602-001655 Dryer Drum Belt. This Belt is a replacement part is compatible with specific Samsung dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced.
Replaces Part Numbers
6602-001655, 6602-001314, 5PH2337, PD00002012, EAP2407938, AP4373659, PS4133825.
Compatibility
This replacement dryer drum belt fits select Samsung and Kenmore (Samsung-manufactured) dryers.
Example compatible models include (but are not limited to):Samsung DV45H7000EW, DV42H5200EPKenmore 592-89045, 592-89047
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM belt length, width, and tension
🌀 Restores Drum Rotation – Ensures smooth, consistent tumbling
💪 Reinforced Rubber Construction – Designed to resist stretching and wear
💰 Cost-Effective Repair – Reliable performance without OEM pricing
🛡️ Fixes Common Issues – Solves drum not turning, squealing noises, or slipping belt
📐 Product Specification
Part Number: 6602-001655
Component Type: Dryer Drum Belt
Material: Reinforced rubber
Belt Style: Ribbed, 5 Rib, 92"
Application: Motor-to-drum drive system
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect dryer power and open the cabinet.
Remove the drum to access the belt path.
Remove the worn belt from the motor and idler pulleys.
Install the new XPARTCO 6602-001655 belt following the original routing.
Reinstall the drum, reassemble panels, and restore power.
Run a test cycle to confirm proper operation.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore smooth dryer operation — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO 4681EA2001T Washer Drain Pump Motor
The XPARTCO 4681EA2001T is an aftermarket replacement drain pump motor assembly compatible with a wide range of LG and Kenmore front-load washers. The drain pump motor forces water out of the washer drum through the drain hose during and after the wash and spin cycles — when it fails, the washer will not drain, will display an OE error code, leave standing water in the drum, or produce a loud humming or grinding noise during the drain phase.
This drain pump motor is rated at 120V–127V, 60Hz, 85W, 1.4A with a flow rate of 45 liters per minute and a spin speed of 1,100–1,200 RPM. It is made from durable metal and ABS plastic and includes the pump impeller and a removable filter housing with sealing ring for quieter, smoother operation. Note: this is the motor assembly only — it reuses the existing pump housing from your washer. It directly replaces 4681EA2001N, 4681EA1007G, 4681EA1007D, AP5328388, and several additional cross-reference numbers. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 4681EA2001T Washer Drain Pump Motor fixes LG and Kenmore front-load washers showing OE error codes, not draining, leaving standing water, or making loud humming or grinding sounds during the drain cycle. Rated 120V–127V/60Hz/85W/1.4A, 45L/min, 1,100–1,200 RPM. Includes impeller and removable filter housing. Motor assembly only — reuses existing pump housing. Replaces 4681EA2001N, AP5328388, 4681EA1007G, and more.
Common Problems This Part Fixes
OE error code displayed — washer cannot drain within the allotted time
Washer not draining — standing water remaining in the drum after a cycle
Loud humming or buzzing during the drain cycle — motor running but impeller not turning
Grinding or rattling noise during draining — physical damage to pump components
Washer stopping mid-cycle due to a drain fault
Washer draining very slowly — worn pump motor below rated flow
Water leaking from the drain pump area
Replaces Part Numbers
This drain pump motor directly replaces the following OEM and cross-reference part numbers:
4681EA2001T, 4681EA1007G, 2003273, 4681EA1007D, 4681EA2001D, 4681EA2001N, 4681EA2001U, DP040-038, ALG51292, AH3579318, EA3579318, PD00001722, EAP3579318, AP5328388, PS3579318.
4681EA2001T is the current updated part number — it is the manufacturer-approved replacement for the older 4681EA2001N. If your washer or parts diagram shows 4681EA2001N, order 4681EA2001T.
Compatibility
This drain pump motor is compatible with select front-load washers from the following brands:
LG front-load washers — WM2xxx, WM3xxx, WM4xxx, WM5xxx, WM8xxx, WM9xxx series
Kenmore / Sears front-load washers (select LG-built models, including 796-series)
Important: This is the pump motor assembly only — it installs into your washer's existing pump housing. The pump housing is not included and is reused from your old assembly. Always verify your model number before ordering. Contact our support team if you're unsure.
Key Features
Forces water out of the drum through the drain hose during wash and spin cycles at 45 liters per minute
Rated 120V–127V, 60Hz, 85W, 1.4A — correct electrical specifications for compatible LG and Kenmore models
Spin speed: 1,100–1,200 RPM for powerful, efficient drainage
Includes pump impeller and removable filter housing with sealing ring
Removable filter housing allows easy cleaning without full pump disassembly
Sealing ring reduces vibration and noise during operation
Durable metal and ABS plastic construction — built to withstand repeated high-volume drainage cycles
Motor assembly only — installs into existing pump housing, no housing replacement needed
Resolves OE error code on compatible LG and Kenmore front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
4681EA2001T
Also Replaces
4681EA2001N (updated current replacement)
Part Type
Washer Drain Pump Motor Assembly
Condition
Aftermarket Replacement
Application
LG and Kenmore Front-Load Washers
Voltage
120V – 127V AC
Frequency
60 Hz
Wattage
85W
Amperage
1.4A
Flow Rate
45 liters per minute
Spin Speed
1,100 – 1,200 RPM
Material
Metal / ABS Plastic
Includes
Motor assembly, impeller, removable filter housing, sealing ring
Note
Motor assembly only — existing pump housing is reused
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning any repair. Place towels and a shallow pan at the front of the washer to catch residual water. Open the small access panel at the lower front of the washer and drain any remaining water through the drain hose or filter port. Remove the front panel of the washer by unscrewing the top panel screws, then removing the door gasket retaining wire and door latch screws to free the front panel. With the front panel removed, the drain pump assembly is now visible at the lower front. Use a flat-head screwdriver to release the pump mounting clip, then disconnect the drain hoses using pliers to loosen the clamps. Disconnect the wire harness from the pump motor. Pull the motor assembly out of the pump housing. Install the new 4681EA2001T motor into the existing housing, reconnect the hoses and wire harness, secure the pump clip, and reassemble the front panel. Restore power and water supply, then run a drain/spin cycle to verify proper drainage. Tools needed: Phillips screwdriver, flat-head screwdriver, needle-nose pliers, slip-joint pliers, shallow pan.
Frequently Asked Questions
What is the difference between 4681EA2001T and 4681EA2001N?
These are the same drain pump motor — 4681EA2001T is the updated current part number that replaced the older 4681EA2001N. LG issued the updated number during a production cycle revision. If your washer or its documentation shows 4681EA2001N, 4681EA2001D, or any other older variant, the 4681EA2001T is the correct replacement to order.
What does the OE error code mean on an LG washer?
OE (or OE error) stands for "Outlet Error" — it means the washer was unable to drain within the expected time. Common causes include a clogged drain filter, a blocked or kinked drain hose, or a failed drain pump motor. Before replacing the motor, check and clean the drain filter and inspect the drain hose for kinks or blockages. If both are clear and the washer still shows OE, the pump motor has likely failed and needs replacement.
Does this include the pump housing?
No — the 4681EA2001T is the motor assembly only. It installs into your washer's existing pump housing, which is not included and does not need to be replaced in most cases. If your pump housing is cracked or damaged, you will need to source it separately. In most repairs, the housing is reused and only the motor assembly is replaced.
Should I check the drain filter before replacing the pump motor?
Yes — always check and clean the drain filter first. LG front-load washers have a coin trap and filter at the lower front that should be cleaned regularly. A heavily clogged filter or a foreign object jammed in the impeller can cause OE errors and loud humming without the pump motor being permanently damaged. Remove the filter, clear debris from the impeller area, and test the washer. If the problem persists after cleaning, the motor is the likely culprit.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from durable metal and ABS plastic to match the electrical specifications and performance of the original 4681EA2001T drain pump motor assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO Dryer Replacement Part
XPARTCO 754305 Dryer Motor Pulley for WP2200376 Replaces WP8066184
Quality aftermarket replacement motor pulley designed for compatible dryers using part numbers 754305, WP2200376, or WP8066184.
Product Description
The XPARTCO 754305 Dryer Motor Pulley is a quality aftermarket replacement part designed to restore proper belt drive operation in compatible dryers. The motor pulley mounts to the dryer motor shaft and transfers motor rotation to the drum belt so the drum can turn during the drying cycle.
This part is intended for applications calling for 754305 or WP2200376 and replaces WP8066184. A worn, damaged, loose, or stripped pulley can cause poor drum rotation, unusual belt noise, belt tracking problems, or a dryer drum that does not turn correctly.
Quick Answer
XPARTCO 754305 is a dryer motor pulley used in compatible applications specifying WP2200376. It also replaces WP8066184. This is a quality aftermarket replacement part for restoring the motor-to-belt drive connection.
Common Problems This Part Fixes
Dryer drum does not turn even though the motor runs
Drive belt slips or tracks incorrectly
Squealing, scraping, or clicking near the motor pulley
Pulley grooves are worn, chipped, cracked, or damaged
Pulley is loose or stripped on the motor shaft
Repeated belt wear caused by a damaged drive pulley
Replaces part Number
Use the following part numbers when checking fit and cross-reference information:
754305, WP2200376, WP8066184
Compatibility
Designed for select dryers that specify motor pulley part number 754305, WP2200376, or the replaced number WP8066184. Dryer pulleys can appear similar while differing in shaft fit, groove profile, diameter, or belt alignment.
Always verify the complete appliance model number and required part number before ordering. If you are unsure, compare your original pulley and model information before installation.
Key Features
XPARTCO quality aftermarket replacement part
Designed for compatible dryer motor assemblies
Transfers motor power to the dryer drive belt
Helps restore proper drum rotation
Direct replacement for specified compatible applications
Cross-references 754305, WP2200376, and WP8066184
Product Specifications
Brand
XPARTCO
Primary Part Number
754305
Compatible / Reference Number
WP2200376
Replaces
WP8066184
Part Type
Dryer Motor Pulley
Condition
New
Quality
Quality aftermarket replacement part
Application
Clothes Dryer
Primary Function
Transfers motor rotation to the dryer drive belt
Package Quantity
1 Motor Pulley
Troubleshooting Guide
Disconnect the dryer from electrical power before inspection or service.
Inspect the drive belt for glazing, cracking, stretching, fraying, or uneven wear.
Inspect the motor pulley grooves for wear, cracks, chips, deformation, or buildup.
Check that the pulley is secure on the motor shaft and does not wobble or slip.
Inspect the idler pulley and drum support components because related drive-system wear can produce similar symptoms.
After repair, confirm the belt is routed correctly and aligned in the motor pulley grooves before operating the dryer.
Safety: Unplug the dryer before service. If you are not comfortable working around electrical and mechanical components, installation should be performed by a qualified appliance technician.
When Should You Replace This Part?
The pulley is cracked, chipped, bent, or visibly worn
The pulley grooves no longer hold or guide the belt correctly
The pulley slips, wobbles, or does not stay secure on the motor shaft
The dryer has recurring belt tracking or belt wear problems traced to the motor pulley
Inspection confirms the original 754305, WP2200376, or WP8066184 pulley is damaged
Shop With Confidence
Choose XPARTCO for dependable appliance replacement parts and practical compatibility support. Verify your dryer model and required part number before ordering for the best fit.
XPARTCO Quality Aftermarket Fast U.S. Shipping Compatibility Support
EXP640 Dryer Belt and Idler Pulley Set – Replaces 661570V & 279640 – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore smooth drum rotation and eliminate dryer noise with the EXP640 Dryer Belt and Idler Pulley Set. This high-quality aftermarket repair kit includes one drum belt and one idler pulley, providing a convenient solution for common belt tension and tumbling issues.
If your dryer is squealing, not turning, or producing uneven drying results, worn belt and pulley components are often the cause. Replacing both parts together helps restore proper belt tension, reduce noise, and extend the life of your dryer.
This kit includes:
1 Drum Belt (Replaces 661570V)
1 Idler Pulley (Replaces 279640)
Belt Replaces Part Numbers
661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, PD00023608, FIX382430, AP5983729, PS11722115
Idler Pulley Replaces Part Numbers
279640, 279640VP, 2958, 3388672, 697692, TJ279640, W10468057, AH334244, EA334244, ER279640, PD00002356, EAP334244, AP3094197, PS334244.
Compatibility
This dryer belt and idler pulley repair kit fits select Whirlpool, Maytag, Kenmore (Whirlpool-manufactured), Amana, Estate, and Roper dryers.
Common compatible models include (but are not limited to):
Whirlpool WED4815EW
Maytag MEDC215EW
Kenmore 110.60612990
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Complete Repair Kit – Includes one drum belt and one idler pulley
🌀 Restores Smooth Drum Rotation – Maintains proper belt tension
🔇 Reduces Noise & Vibration – Fixes squealing or slipping belt issues
💪 Durable Construction – Reinforced belt and long-life pulley bearing
💰 Cost-Effective Solution – Replace two common wear parts at once
📐 Product Specification
Kit Number: EXP640
Includes:
(1) Dryer Drum Belt – Replaces 661570V
(1) Dryer Idler Pulley – Replaces 279640
Application: Dryer drum drive system
Material: Reinforced rubber belt, metal pulley with bearing
Quality Level: Aftermarket replacement kit (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove the top and front panels (model dependent).
Remove the drum and old belt and pulley.
Install the new idler pulley onto the idler arm.
Route the new belt around the drum and motor pulley.
Reassemble the dryer and test operation.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore quiet, reliable dryer performance — Add to Cart Now for a complete repair solution!
WPW10547292 Genuine OEM Whirlpool Dryer Idler Pulley
The WPW10547292 is a genuine Whirlpool OEM idler pulley assembly for Whirlpool, Maytag, and Kenmore dryers. This pulley sits to the left of the motor, just below the drum belt, and its job is to ride against the belt and keep constant tension on it as the motor turns — without that tension, the belt would sag, slip on the motor pulley, and fail to reliably turn the drum. The pulley wheel itself spins freely on a bearing mounted to a bracket, so as the belt moves, the pulley spins along with it under light load.
Over time, the bearing inside the pulley wheel wears out, causing it to spin roughly, seize partially, or bind up entirely instead of turning freely. When that happens, the belt drags against a pulley that should be spinning smoothly with it, generating friction, heat, and noise. A worn idler pulley produces a very recognizable symptom: a persistent squeaking or squealing sound during operation that often gets more noticeable over time, and in more advanced cases, a drum that struggles to spin or doesn't spin at all, or a burning smell as the seized pulley drags against the belt. It directly replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, and LP16246.
Quick Answer
The WPW10547292 Genuine OEM Whirlpool Dryer Idler Pulley fixes Whirlpool, Maytag, and Kenmore dryers with a persistent squeaking or squealing noise during operation, a drum that struggles to spin, or a burning smell from a seized pulley dragging against the belt. Mounts to the left of the motor, below the belt. Replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, LP16246. Consider replacing the drum belt (8544742/WP8544742) at the same time — a seized idler pulley is a common cause of premature belt wear, and you'll already have the cabinet open.
Common Problems This Part Fixes
Persistent squeaking or squealing noise during operation
Noise that gradually gets louder or more frequent over time
Drum that struggles to spin, spins intermittently, or won't spin at all
Burning smell coming from inside the dryer cabinet
Pulley wheel that feels stiff, gritty, or seized when checked by hand
Drive belt showing premature wear or fraying from dragging against a bound-up pulley
Noise that stops and starts depending on drum rotation or load size
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer idler pulley directly replaces the following OEM and cross-reference part numbers:
WPW10547292, W10547292, WPW10547292VP, AP6022817, 8547160, EAP11756154, PS11756154, AWP50878, PD00003590, LP16246
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This idler pulley is compatible with select Whirlpool, Maytag, and Kenmore dryers, including model numbers such as:
Whirlpool: WED7300XW0, WED7800XB0, WED8100BW0, WED8500BC0, WED8500BR0, WED8500BW0, WED8600YW0, WED8600YW1, 7MWGD7800XW0, 7MWGD8800AW0, 7MWGD8800AW1
Whirlpool (Y-prefix): YWED8000BW0, YWED8100BW0, YWED8200YW2, YWED8400YW2, YWED8500BC0, YWED8500BW0, YWED8800YC2, YWED8800YW2, YWED8900BC0, YWED8900BW0, YMEDB980BW0
Maytag: 7MMGDB850WL0, 7MMGDB950AG0, MEDB200VQ1, MEDB725BW0, MEDB800VB0, MEDB850WL1, MEDB850WR1
Kenmore: 110.78102310, 11067032600, 11067032601, 11067042600, 11067042601, 11067052600, 11067062600, 11067072600, 11067082600, 11067086600
Note: Whirlpool uses several different idler pulley designs across its dryer lineup, and they are NOT interchangeable. This WPW10547292 pulley is a separate part from the W10837240 pulley (used on Cabrio, Duet, and Bravos XL platforms) and the 279640 pulley (an older, differently-shaped design). Fitting the wrong pulley can result in a bracket that doesn't mount correctly or a wheel that doesn't align with your belt. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which pulley fits your dryer.
Key Features
Genuine Whirlpool OEM part — factory-specified bearing and bracket design
Maintains constant tension on the drive belt so it can turn the drum smoothly
Resolves "squeaking or squealing noise," "drum won't spin," and "burning smell" symptoms caused by a worn or seized pulley bearing
Complete wheel-and-bracket assembly — no need to source parts separately
Direct drop-in replacement — mounts to the original bracket position with the same bolt
Replaces W10547292, WPW10547292VP, AP6022817, 8547160, PS11756154, and LP16246
Compatible with Whirlpool, Maytag, and Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WPW10547292
Part Type
Dryer Idler Pulley Assembly (Wheel + Bracket)
Condition
Genuine OEM
Brand
Whirlpool
Location
Left of the motor, below the drum belt
Function
Maintains tension on the drive belt as it turns the drum
Fuel Type
Electric and gas dryers
Companion Part
8544742 / WP8544742 drum belt (check/replace if pulley failed)
Repair Difficulty
Medium — requires some disassembly
Quantity
1 idler pulley assembly
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — On Gas Models, Shut Off The Gas Supply Too Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas dryer, also close the gas shutoff valve before moving the cabinet. Wear work gloves. Remove the lint filter, then remove the screws along the top edge of the front panel and take the panel off. With the front open, locate the belt tensioner pulley — it sits to the left of the motor, just below the belt. Use a socket wrench with an extension to loosen the pulley's mounting bolt, then remove the old pulley assembly, releasing the belt from it as you go. Slide the new WPW10547292 assembly onto the mounting post, making sure the grooves line up correctly so the belt seats snugly against the wheel, then re-tighten the mounting bolt securely. Before closing everything up, spin the new pulley by hand to confirm it turns freely with no grinding or resistance, and inspect the belt for wear, glazing, or fraying — replace it as well if it shows any of these signs, since a worn belt will quickly wear out even a brand-new pulley. Reinstall the front panel and its screws, restore power, and run a short empty cycle listening for the squeak to confirm it's resolved. Tools needed: 1/4" nut driver, 3/8" socket wrench with extension, Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer squeaks constantly. Is this definitely the idler pulley?
It's one of the most common causes of a persistent squeak, especially if the noise is steady and present throughout the cycle rather than only at certain moments. The pulley's internal bearing wears out over years of use, and a worn bearing produces exactly this kind of ongoing squeal as it spins roughly instead of smoothly. If you can access the pulley and spin it by hand, feeling any grinding or stiffness confirms the diagnosis.
Is this a hard repair, or can I do it myself?
It's a moderate repair — you'll need to remove the front panel and access the area behind the motor, which some customers describe as needing to "pull the entire dryer apart" to reach the pulley. It's very doable with basic hand tools and some patience, but budget more time than a simple part swap, and expect to use a socket wrench with an extension to reach the mounting bolt in that tighter space.
Should I replace the belt while I'm already in there?
It's worth strongly considering. A seized or dragging pulley puts extra wear on the belt, so if your pulley failed from being seized rather than just noisy, the belt may already be showing damage. Since you'll already have the cabinet open and the belt exposed, inspecting it — and replacing it if it shows glazing, cracking, or fraying — saves you from repeating this same teardown again soon after.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original bearing design, bracket shape, and mounting configuration of the idler pulley assembly originally installed in your Whirlpool, Maytag, or Kenmore dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4681EA2001T Genuine OEM LG Washer Drain Pump Motor
The 4681EA2001T is a genuine LG OEM drain pump motor for LG and Kenmore front-load washers, and also fits washer/dryer combo units. This motor is responsible for removing water from the washer at the end of the wash and spin cycles, expelling it through the drain hose so the machine can move on to the next stage of the cycle.
This part is the motor only — you'll reuse your existing pump housing. It includes the pump impeller, which is not sold separately. Rated 120V-127V, 60Hz, 85W, 1.4A, with a flow rate of 45L per minute. Measures approximately 6.57" x 4.29" x 3.5". As of April 2025, the design of this drain pump motor changed to a gray housing, replacing the earlier black housing — this is expected and doesn't affect fit or function. Common failure causes include a worn or seized motor and general electrical wear. Symptoms of a failing drain pump motor include the washer not draining, unusual noise during the drain cycle, an OE error code, or leaking near the pump if the motor fails while still under load. It directly replaces 4681EA2001D, 4681EA2001U, 4681EA2001N, 4681EA1007G, 4681EA1007D, LP2001T, AP5328388, 2003273, 1468049, DP040-038, EAP3523278, EAP3579318, and 5214FR4006L.
Quick Answer
The 4681EA2001T Genuine OEM LG Washer Drain Pump Motor fixes LG and Kenmore front-load washers (and washer/dryer combos) that aren't draining, are making unusual noise during the drain cycle, or are showing an OE error code. 120V-127V, 60Hz, 85W, 1.4A, 45L/min. Replaces 4681EA2001D, 4681EA2001U, 4681EA2001N, 4681EA1007G, 4681EA1007D, LP2001T, AP5328388, 2003273, 1468049, DP040-038, EAP3523278, EAP3579318, 5214FR4006L. This is the motor only — reuse your existing pump housing when installing. As of April 2025, the new housing color is gray instead of the older black; this is a normal design change and not a compatibility issue.
Common Problems This Part Fixes
Washer not draining — standing water left in the tub after a cycle
Unusual noise during the drain cycle
OE error code displayed on the control panel
Washer taking longer than normal to drain
Leaking near the pump area
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drain pump motor directly replaces the following OEM and cross-reference part numbers:
4681EA2001T, 4681EA1007G, 2003273, 4681EA1007D, 4681EA2001D, 4681EA2001N, 4681EA2001U, DP040-038, ALG51292, AH3579318, EA3579318, PD00001722, EAP3579318, AP5328388, PS3579318
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain pump motor is compatible with select LG front-load washers, and also fits select Kenmore Elite washers built on the LG platform, and washer/dryer combo units, including model numbers such as WM2101HW, WM3270CW, WM3431HS, WM3770HVA, WM3001HWA, WM8000HVA, WM8000HWA, WM2550HRCA, WM2550HWCA, GCW1069CS, WM3550HWCA, WM3070HRA, WM4070HVA, WM3070HWA, WM2350HRC, WM3360HVCA, WM2350HWC, GCW1069QS, WM2650HRA, WM3360HRCA, WM3360HWCA, WM3150HVC, WM2650HWA, WM2655HVA, WM3885HCCA, WM3150HWC, WM3885HWCA, WM2250CW, WM2450HRA, WM3987HW, WM3470HVA, WM3470HWA, LSWF388HVS, WM3550HVCA, WM2455HG, WM2277HB, WM2487HRMA, and Kenmore 79641072310.
Note: Always verify your full model number before ordering, since LG uses several different drain pump designs across its washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified motor design and impeller
Pumps wastewater out of the tub through the drain hose
Resolves "not draining," "unusual noise during drain," and "OE error code" symptoms caused by motor failure
Includes pump impeller (not sold separately)
Reuses your existing pump housing — motor only
Rated 120V-127V, 60Hz, 85W, 1.4A, 45L/min flow rate
Direct drop-in replacement matching the original mounting and connections
Replaces 4681EA2001D, 4681EA2001U, 4681EA2001N, 4681EA1007G, 4681EA1007D, LP2001T, AP5328388, 2003273, 1468049, DP040-038, EAP3523278, EAP3579318, and 5214FR4006L
Compatible with LG and Kenmore front-load washers and washer/dryer combo units
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
4681EA2001T
Part Type
Washer Drain Pump Motor
Condition
Genuine OEM
Brand
LG
Application
Front-Load Washers, Washer/Dryer Combos
Voltage
120V-127V
Frequency
60 Hz
Wattage
85 W
Amperage
1.4 A
Flow Rate
45 L/min
Dimensions
Approx. 6.57" x 4.29" x 3.5"
Housing
Not included — reuse existing pump housing
Housing Color (as of April 2025)
Gray (previously black)
Repair Difficulty
Medium — 30 to 60 minutes
Quantity
1 drain pump motor
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Have Towels Ready For Draining Water Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Lay towels down in front of the washer before starting, and have a pail ready. Remove the detergent drawer and check the drain filter (bottom lower left panel door) to confirm it's clean and the drain line isn't blocked before assuming the motor is at fault. Many customers find it easier to access the pump from underneath by carefully laying the washer on its back — be prepared for a significant amount of additional water to drain out onto the floor once you do this, so keep towels close by. With access to the pump, disconnect the electrical connector from the old motor and separate the motor from the pump housing, which you'll reuse with the new motor. Attach the new 4681EA2001T motor to your existing pump housing, transferring the impeller setup as needed. Reconnect the electrical connector fully. Stand the washer back upright, reinstall the detergent drawer, and reconnect the water supply and power. Test the new pump to confirm it drains properly before considering the repair complete. Tools needed: Phillips screwdriver, locking pliers, needle nose pliers, small flathead screwdriver, towels, work gloves.
Frequently Asked Questions
My washer shows an OE error code and isn't draining. Is this the part I need?
Likely yes. An OE error code on LG washers is commonly tied to a drain issue, and a bad drain pump motor is one of the most frequent causes. Before replacing the motor, it's worth checking that the drain filter and coin trap (if your model has one) are clean and that the drain line itself isn't blocked, since those are simpler and cheaper things to rule out first.
Does this come with the pump housing?
No, this is the motor only, and it includes the pump impeller, which isn't sold separately. You'll reuse your existing pump housing during installation rather than replacing it as part of this repair.
The new motor's housing looks a different color than I expected. Did I get the wrong part?
No, this is expected. As of April 2025, LG changed the design of this drain pump motor to use a gray housing in place of the earlier black housing. This is a normal manufacturing update and doesn't affect fit or function.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, impeller, and electrical rating of the drain pump motor originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
280146 Washer Motor Rotor
Product Condition:
Genuine OEM
New / Old Stock
Replaces Part Numbers: 280146, 1175771, 8565177, AH993018, EA993018, AP3882831, PS993018.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
