W10335056 Washer Genuine OEM Water Level Switch Pressure Switch
Replaces Part Numbers: W10335056, 1617123, 3366846, AH3408073, EA3408073, AP4566382, PS3408073, W10335056VP.
Description: This Pressure Switch is a Genuine OEM part for specific Whirlpool washing machine models. This part ensures your machine fills with the correct amount of water for the selected cycle, preventing overfilling or insufficient water levels that can lead to suboptimal washing results. A faulty Pressure Switch can result from several issues, including clogging with detergent residue or debris, wear and tear from regular use, or electrical malfunctions affecting its responsiveness.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DC64-00519D Washer Genuine OEM Door Lock
Replaces Part Numbers: DC64-00519D, 4545806, AP6027082, PS11762120.
Description: This Washer Door Lock Switch is an essential component for maintaining the security and functionality of your Samsung washer. Designed to ensure that the washer door remains securely locked during operation, this genuine OEM part guarantees reliable performance and durability. By replacing a faulty or damaged door lock switch with this high-quality assembly, you can restore your washer's ability to operate safely and efficiently.
W11670519 Genuine OEM Whirlpool Washer Lid Lock Latch Assembly
The W11670519 is a genuine Whirlpool OEM lid lock latch assembly for Maytag top-load washers on the Cabrio-style MVW platform. Unlike a simple mechanical lid switch, this is a true electronic lid lock: a 3-wire connector feeds the assembly, which both senses whether the lid is closed and physically locks it shut once a cycle with spin is underway. The control won't allow the washer to spin — and on many cycles won't even let it start — until this assembly confirms the lid is closed and locked, which is why a failing latch produces such a wide range of symptoms: a washer that won't start, a lid that won't lock or won't release, cycles that stall or interrupt partway through, or a washer that fills and agitates but refuses to spin.
Built from high-strength, wear-resistant ABS and PP plastic with a precision locking mechanism, this assembly is designed to prevent the lid from popping open mid-spin, which protects against water leakage and the safety hazard of an open lid on a spinning basket. Common failure modes include a locking mechanism that has worn out and can no longer engage or release reliably, a broken internal switch that stops signaling lid status to the control board, and simple wear from years of daily cycling. It directly replaces W11368616, AP7214714, PD00085482, 4981394, PS17215992, and EAP17215992. As a genuine OEM part, the W11670519 is manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The W11670519 Genuine OEM Whirlpool Washer Lid Lock Latch Assembly fixes Maytag top-load washers on the Cabrio-style MVW platform where the washer won't start, the lid won't lock or won't release, the washer fills and agitates but won't spin, the cycle stalls or interrupts, or the lid clicks repeatedly without locking. 3-wire electronic lid lock, ABS/PP construction. Replaces W11368616, AP7214714, PD00085482, 4981394, PS17215992, EAP17215992. This is a locking latch assembly, not a simple lid switch — it's a different design from the direct-drive and GE-platform lid switches elsewhere in our catalog.
Common Problems This Part Fixes
Washer won't start even though the lid is closed
Lid won't lock, or locks but won't release when the cycle ends
Washer fills and agitates normally but won't spin
Persistent clicking sound from the lid area without the lid actually locking
Cycle stalling or interrupting partway through
Lid feels loose or doesn't seat and lock the way it used to
Error code related to the lid lock displayed on the control panel
Water leakage risk from a lid that isn't sealing and locking properly during spin
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer lid lock latch assembly directly replaces the following OEM and cross-reference part numbers:
W11670519, W11368616, AP7214714, AWP46151, PD00085482, 4981394, PS17215992, EAP17215992
W11368616 was an earlier number for this same assembly. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lid lock latch assembly is compatible with select Maytag top-load washers on the Cabrio-style MVW platform, including model numbers such as:
MVW4505MW0, MVW4505MW1, MVW4505MW2
MVW5035MW1, MVW5035MW2
MVW5430MW1, MVW5430MW2, MVW5430PBK0, MVW5430PBK1
MVW5435PBK0, MVW5435PBK1, MVW5435PW0, MVW5435PW1
Note: This is an electronic locking latch assembly for the Maytag Cabrio-style MVW platform, and it is a different design from the simpler lid switches used on other Whirlpool platforms — including our 8318084 (direct-drive top-load), 3355806 (Whirlpool thin-twin), WH12X955 (GE combo/spacemaker), and WH01X29528 (GE front-load door lock) listings. None of those are interchangeable with this assembly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which lid lock or switch your washer needs.
Key Features
Genuine Whirlpool OEM part — factory-specified locking mechanism and switch design
Electronic lid lock — both senses lid position and physically locks the lid during spin cycles
Resolves "won't start," "lid won't lock or release," "fills but won't spin," and "cycle interruptions" symptoms caused by latch failure
3-wire connector for a direct plug-and-play electrical connection
Constructed from high-strength ABS and PP plastic for wear and aging resistance
Precision-designed locking mechanism helps prevent accidental lid opening during spin
Direct drop-in replacement — no modification required
Replaces W11368616, AP7214714, PD00085482, 4981394, PS17215992, and EAP17215992
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11670519
Part Type
Washer Lid Lock Latch Assembly
Condition
Genuine OEM
Brand
Whirlpool / Maytag
Application
Maytag Cabrio-Style Top-Load Washers (MVW Platform)
Electrical Connection
3-wire connector
Material
High-strength ABS and PP plastic
Function
Senses lid closure and physically locks the lid during spin
Supersedes
W11368616
Quantity
1 lid lock assembly
Compatible Brands
Whirlpool, Maytag
Installation Notes
⚠️ Unplug Washer Before Starting — If The Lid Is Locked Shut, Release It Manually First Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. If the old latch has failed in the locked position and you can't open the lid, insert a small flathead screwdriver into the latch opening where the lock mechanism engages through the lid, and gently slide the mechanism back to release it — then prop the lid open so it can't re-close and re-lock while you work. Remove the two screws holding the top section (control panel, lid, and wash basket opening) and slide the top of the unit forward and up to remove it, then prop it securely (a sturdy support between the cabinet frame and the top panel works well) rather than relying on your hands to hold it up. With the top propped open, remove the plastic cowl that the lid latch sits inside, which also retains the lock mechanism. Unclip the wiring harness from the retaining clips running around the inside of the lid and let the assembly hang free. Photograph the wiring connections before disconnecting the 3-wire connector from the old assembly. At the back of the lid, two metal spring clips retain the mechanism — squeeze these with your fingers or a set of pliers to release the old assembly, then pop the new W11670519 into place the same way. Reconnect the 3-wire connector, reclip the wiring harness into its retaining clips, and reinstall the plastic cowl. Lower the top panel back into position, reinstall its retaining screws, and confirm the lid closes, latches, and locks correctly through a full test cycle including spin. Tools needed: small flathead screwdriver, Phillips screwdriver, pliers, a sturdy prop for the top panel, work gloves.
Frequently Asked Questions
My washer fills and agitates but won't spin. Is this the lid lock?
Yes, this is one of the most common symptoms of a failing lid lock latch on this platform. The control requires confirmation that the lid is closed and locked before it will allow the higher-speed, higher-torque spin cycle to run, even if it's willing to run the gentler fill and agitate steps without full confirmation. If your washer gets partway through a cycle and simply refuses to spin, this assembly is a strong suspect.
The lid keeps clicking but never actually locks. What does that mean?
A repeated clicking sound without the lid actually locking usually points to a worn or failing internal locking mechanism inside this assembly — it's attempting to engage but can't complete the lock reliably. This is a textbook symptom that this part has worn out and needs replacement.
My washer's lid is locked shut and won't open. How do I even get it open to do this repair?
With the washer unplugged, you can usually manually release the lock: insert a small flathead screwdriver into the latch opening where the mechanism engages through the lid, and gently slide it back to disengage the lock. Once the lid is open, prop it so it can't fall shut and re-lock while you continue the repair.
Is this the same part as the lid switches used on other Whirlpool washers?
No. This is an electronic locking latch assembly specific to the Maytag Cabrio-style MVW platform, and it works differently from the simpler mechanical lid switches used on other Whirlpool-family platforms, including the direct-drive top-load switch, the Whirlpool thin-twin switch, and various GE-platform switches we also carry. These parts are not interchangeable with each other — always match the assembly to your specific washer platform.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It includes the same 3-wire electrical connection, locking mechanism, and ABS/PP construction as the lid lock latch assembly originally installed in your Maytag Cabrio-style washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH01X27538 Washer Drive Belt
The XPARTCO WH01X27538 is an aftermarket replacement washer drive belt for GE and Hotpoint top-load washers. It is a 5-rib belt with 4 grooves, approximately 22.87 inches long. The belt connects the drive motor to the transmission pulley, so the motor can spin the basket and agitate the clothes. A worn, stretched, or broken belt can cause a washer that won't spin or agitate, a slow spin, squealing, or noise during the cycle.
This is a direct-fit aftermarket replacement for the original GE belt. Belts differ between washer families, so check the part number against your model before ordering.
Quick Answer
The XPARTCO WH01X27538 Drive Belt fixes a GE or Hotpoint top-load washer that won't spin or agitate, spins slowly, or squeals or makes noise because the drive belt is worn or broken. Classic symptom: the motor runs, but the basket or agitator doesn't turn.
Common Problems This Part Fixes
Motor runs but the basket or agitator doesn't turn
Washer won't spin or agitate
Slow spin or poor wash performance
Squealing or noise during the cycle
Visibly worn, cracked, stretched, or broken belt
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drive belt directly replaces the following part number:
WH01X27538, 290D1101P005, 4587903, AGE25699, AP6328256, OEM18984777, PD00043350, PS12299369
Confirm against your washer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This drive belt is listed for GE and Hotpoint top-load washers, including these examples:
GE GTW220ACK4WW, GTW220ACK5WW, GTW330ASK4WW, GTW335ASN1WW
GE GTW460ASJ8WW, GTW460ASJ9WW, GTW460ASJAWW
Hotpoint HTW200ASK3WW, HTW240ASK5WS, HTW240ASK6WS
Note: The models above are a small sample, not a full list. Washer belts differ between families, so compare your old belt to this one (approximately 22.87 inches, 5 ribs) and check your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket drive belt for GE and Hotpoint top-load washers
5-rib, 4-groove design, approximately 22.87 inches long
Connects the drive motor to the transmission pulley
Resolves no-spin, no-agitate, and noise problems caused by a worn belt
Typically a 30 minute to 1 hour repair
Product Specifications
Part Number
XPWH01X27538
OEM Part Number
WH01X27538
Part Type
Washer Drive Belt
Condition
Aftermarket Replacement
Belt Length
Approx. 22.87 Inches
Belt Profile
5-Rib, 4-Groove
Application
GE & Hotpoint Top-Load Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer before beginning, and wear work gloves to protect your hands. Access to the belt depends on your model, so follow its service guide to reach the motor and pulleys. Note how the old belt is routed, remove it, and fit the new belt on the same pulleys. Check that it is seated in the pulley grooves before reassembling.
Frequently Asked Questions
My washer motor runs but the basket won't turn. Is this the part I need?
A broken or slipping drive belt is a common cause. If the belt looks worn, cracked, or loose, replacing it is a good first step.
How long is this belt?
It is approximately 22.87 inches long, with 5 ribs and 4 grooves. If your old belt is a very different length or has a different number of ribs, check your model number before ordering.
Is this a top-load or front-load part?
It is listed for GE and Hotpoint top-load washers. If you are unsure which belt your washer uses, check your model number or contact our support team.
Is this an easy repair?
Retailers list it at roughly 30 minutes to 1 hour, though it depends on your model. Follow your model's service guide to reach the motor and pulleys.
Will this fit my washer?
It is listed for many GE and Hotpoint washers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WB03X24818CM Range Control Knob
Burner Knob.
Fits specific GE Gas Range models.
Replaces Part Numbers: WB03X24818, AP5989029, PS11729081.
Description: This Range Knob is a replacement part for specific GE ranges and oven models. It is used to control the temperature and settings of the stove's burners or oven functions, providing an interface for selecting heat levels and cooking modes.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO WH05X24185 Washer Clutch
The XPARTCO WH05X24185 is an aftermarket replacement clutch for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This clutch engages and disengages the transmission during the wash and spin cycles, transferring the motor's power to spin the basket so your clothes finish damp rather than soaked.
Made of white plastic with a glossy finish, measuring approximately 3"L x 3"W x 1"H. Sold individually and does not include any other parts, such as the shift actuator (our WH03X30517 listing) that works alongside it. Common causes of failure include wear and tear over time, excessive load, or mechanical obstruction. Symptoms of a worn or failing clutch include clothes coming out wet even after a completed spin cycle, a slight burning odor during operation, or issues with spinning or agitating. It directly replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473.
Quick Answer
The XPARTCO WH05X24185 Washer Clutch fixes GE, Hotpoint, Haier, Monogram, and Café top-load washers where clothes come out wet after spinning, there's a slight burning odor during operation, or the washer has trouble spinning or agitating. White plastic, glossy finish, ~3"L x 3"W x 1"H. Sold individually. Replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473. If you also see grease pooling on the floor under the washer, that's more likely a transmission gearcase leak than this clutch — and if the agitator only slips in one direction, check the agitator bolt before assuming the clutch has failed.
Common Problems This Part Fixes
Clothes coming out wet even after a completed spin cycle
Slight burning odor during operation
Washer having trouble spinning or agitating
Reduced washer performance from clutch wear
Grinding or unusual noise tied to the transmission area
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer clutch directly replaces the following OEM and cross-reference part numbers:
WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This clutch is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform.
Note: This clutch is commonly replaced alongside our WH03X30517 shift actuator, since the two work together in the same wash/spin transition system, but they are sold separately. If your washer also isn't switching between agitation and spin, check the actuator as well. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement clutch — engages and disengages the transmission during wash and spin
Resolves "clothes still wet," "burning odor," and "trouble spinning or agitating" symptoms
White plastic, glossy finish
Approximately 3"L x 3"W x 1"H
Direct drop-in replacement matching the original mounting
Replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Sold individually
Product Specifications
Part Number
XPWH05X24185
OEM Part Number
WH05X24185
Part Type
Washer Clutch
Condition
Aftermarket Replacement
Color
White
Material
Plastic
Finish
Glossy
Dimensions
Approx. 3"L x 3"W x 1"H
Related Part
WH03X30517 shift actuator (sold separately)
Repair Difficulty
Moderate — some disassembly required
Quantity
1 clutch (sold individually)
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning to cut off electricity and prevent accidental shocks. Wear work gloves. Remove the two screws at the back of the washer with a Phillips head screwdriver, then pull off the main console and carefully set it aside. Locate the access plate on the transmission side and remove the screws securing it. Take the belt off the pulley and remove the belt guard. Remove the four screws that secure the clutch and take it off from the wet end of the transmission. Install the new WH05X24185 clutch and replace the four screws. Reattach the belt, pulley, and access plate, and replace their screws. Put the main console back onto the washer and secure it with the two screws. Restore power and run a test cycle to confirm clothes are coming out properly damp at the end of the spin cycle, with no burning odor or unusual noise. Tools needed: Phillips screwdriver, socket wrench, work gloves.
Frequently Asked Questions
My clothes come out wet after the spin cycle. Is this the clutch I need?
Yes, this is one of the most common symptoms of a worn or failing clutch. Since this clutch is what engages the transmission to spin the basket at high speed, a worn clutch can slip rather than fully engaging, leaving clothes wetter than they should be at the end of the cycle. A slight burning odor during operation is another documented sign of the same wear.
I noticed grease on the floor under my washer. Is that this clutch leaking?
Not directly — grease pooling under the washer typically comes from the gearcase transmission itself rather than the clutch. If you're seeing this symptom, the transmission may need attention in addition to, or instead of, this clutch, depending on what else you're experiencing.
My agitator slips going one direction but not the other. Is that the clutch?
Not necessarily. This specific symptom — the agitator pulling fine in one direction but slipping in the other — is more often traced to a loose agitator bolt. It's worth checking and tightening that bolt first; if the problem persists, the agitator base hybrid assembly may need inspection before assuming this clutch is at fault.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the material, dimensions, and mounting configuration of the original WH05X24185 clutch used in compatible GE, Hotpoint, Haier, Monogram, and Café top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WH01X29528 Genuine OEM GE Washer Door Lock
The WH01X29528 is a genuine GE OEM door lock assembly for GE front-load washers and select GE Ultrafast 2-in-1 combo washer/dryers. This is a safety mechanism, not just a switch: when the door closes, the lock engages automatically and secures the door shut for the full length of the cycle, only releasing once the control confirms it's safe to open. This prevents the door from being opened mid-cycle, which would otherwise let water and detergent spill out and create both a mess and a safety hazard.
Rated 120VAC, 60Hz, 16A. Over time, the door lock can fail from physical damage or ordinary wear, and when it does, the symptoms can be wide-ranging: a washer that won't start because the control never confirms the door is locked, a cycle that stops partway through, a door that won't unlock at the end of a cycle, or in some cases excessive noise and shaking during operation since the lock also plays a role in keeping the door assembly seated correctly. It directly replaces AP6985313, EAP12749276, 4958749, PS12749276, PD00060769, ITW 12070-71, V13305, and 0024000128GE. As a genuine OEM part, the WH01X29528 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WH01X29528 Genuine OEM GE Washer Door Lock fixes GE front-load washers and GE Ultrafast combo washer/dryers where the door won't lock, the washer won't start, the door pops open or unlocks unexpectedly during the cycle, or the cycle stops partway through. 120VAC, 60Hz, 16A. Replaces AP6985313, EAP12749276, 4958749, PS12749276, PD00060769, ITW 12070-71, V13305, 0024000128GE. Before replacing, try a power reset — unplug the washer for 30 seconds and plug it back in — or hold Start/Pause for 15 seconds to command the control to release the lock; either can resolve a door stuck locked without needing a new part.
Common Problems This Part Fixes
Washer won't start because the door lock never confirms as locked
Door lock fails to engage, or the door pops open after locking
Door unlocks unexpectedly during the wash cycle
Cycle stops or interrupts partway through
Door won't unlock at the end of a completed cycle
Excessive noise or shaking during operation related to a loose door seal
Error code related to the door lock displayed on the control panel
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer door lock directly replaces the following OEM and cross-reference part numbers:
WH01X29528, 4958749, AP6985313, PS12749276, EAP12749276, PD00060769, ITW 12070-71, V13305, AGE26402, PD00060769, 0024000128GE
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door lock is compatible with select GE front-load washers and GE Ultrafast 2-in-1 combo washer/dryers, including model numbers such as:
GFW510SCN0WW, GFW510SCN1WW, GFW510SCN2WW, GFW510SCN3WW, GFW510SCN4WW, GFW510SCN5WW
GFW550SPN0DG, GFW550SPN2DG, GFW550SSN1WW
GFW650SPN1SN, GFW650SPN2SN, GFW650SSN2WW, GFW650SSN3WW
GFW655SSV0WW, GFW655SPV0WW
GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS, GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW, GFW850SSN4WW, GFW850SSN5WW
PFQ97HSPV0DS (GE Ultrafast 2-in-1 combo washer/dryer)
PFW870SPV0RS, PFW870SSV0WW
PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS
Note: Always verify your full model number before ordering, since GE uses several different door lock assemblies across its front-load washer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified locking mechanism and switch design
Safety lock that secures the door shut for the full length of the wash cycle
Resolves "won't lock," "won't start," "door pops open," and "cycle interruptions" symptoms caused by lock failure
Rated 120VAC, 60Hz, 16A
Direct drop-in replacement — matches the original mounting and harness connector
Replaces AP6985313, EAP12749276, 4958749, PS12749276, PD00060769, ITW 12070-71, V13305, and 0024000128GE
Compatible with GE front-load washers and GE Ultrafast 2-in-1 combo washer/dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WH01X29528
Part Type
Washer Door Lock Assembly
Condition
Genuine OEM
Brand
GE
Application
Front-Load Washers, GE Ultrafast Combo Washer/Dryers
Voltage
120VAC
Frequency
60 Hz
Current Rating
16A
Function
Locks the door shut during the wash cycle; releases when the control confirms it's safe
Quantity
1 door lock assembly
Compatible Brand
GE
Installation Notes
⚠️ Unplug Washer Before Starting — Try A Power Reset First If The Door Is Stuck Locked Before replacing the part, try the simplest fixes first. Unplug the washer, wait 30 seconds, and plug it back in to let the control fully reboot — a simple power reset can release an operational lock and clear the problem without any disassembly. If that doesn't work, try holding the Start/Pause or Power button for 15 seconds to command the control to unlock the door; this doesn't always succeed but is quick to try before opening up the washer. If the door is still locked and you need physical access, never work on the appliance while it's connected to power. Once you've confirmed replacement is necessary, disconnect power at the outlet or shut off the circuit breaker. Wear work gloves. Access is typically from the front, working around the door boot/gasket to reach the lock assembly mounted to the front panel. Photograph the wiring harness connector and mounting position before disconnecting anything. Disconnect the harness connector from the old lock, remove its mounting screws, and pull it free. Install the new WH01X29528 in the same position, secure the mounting screws, and reconnect the harness connector fully. Reseat the door boot/gasket if it was disturbed, restore power, and run a test cycle to confirm the door locks, stays locked through the cycle, and releases normally at the end. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My washer's door is stuck locked. Do I need to replace this part right away?
Not necessarily — try the simple resets first. Unplug the washer for 30 seconds and plug it back in to let the control fully reboot, which can release an operational lock on its own. If that doesn't work, try holding the Start/Pause or Power button for 15 seconds, which commands the control to release the lock electronically. These steps resolve many stuck-door situations without needing to replace the lock assembly at all.
My washer won't start. Is that this part?
It's a strong possibility. The control won't begin a cycle until it receives confirmation that the door is locked, so if this lock has failed and isn't sending that signal, the washer will simply refuse to start even though everything else appears normal. Try the power reset steps above first, then check for a door lock-related error code on the display before assuming the part has failed.
I already replaced this lock once and it failed again. What should I check?
If a newly replaced lock fails again relatively quickly, it's worth having the washer's control board checked, since a board that's sending incorrect signals to the lock can cause repeat failures that look like the lock itself is bad. It's also worth confirming the door boot/gasket is seated correctly, since a misaligned door can put uneven stress on the lock mechanism.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It includes the same locking mechanism, switch design, and harness connector as the door lock originally installed in your GE front-load washer or Ultrafast combo washer/dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 3355806 Washer Lid Switch Replaces WP3355806
The XPARTCO 3355806 is an aftermarket replacement stackable washer lid switch assembly compatible with a wide range of Whirlpool, Kenmore, Roper, Estate, KitchenAid, Maytag, Admiral, Amana, Crosley, Inglis, and Magic Chef stacked washer/dryer laundry centers (thin twin and space-saver units). The lid switch is a safety component mounted near the top of the washer — it detects whether the lid is open or closed and prevents the washer from spinning while the lid is open. When you close the lid, a pin on the lid activates the lever on the switch, signaling the control that it's safe to spin. Without a functioning lid switch, the washer won't spin as a safety measure, even though it may still fill and agitate normally.
The switch commonly fails in one of two ways: the plastic body cracks from the lid being slammed over time, or the internal switch contacts wear out and can no longer signal that the lid is closed. Features an 11" wiring harness with round plugs and a 7/8" block connector. It directly replaces WP3355806, WP3355806VP, 3355806, 520880, AP6008072, AP2947199, AH11741201, EA11741201, EAP11741201, PS11741201, PS341529, and PD00002599. Installs in 15–30 minutes with basic hand tools and novice repair experience.
Quick Answer
The XPARTCO 3355806 Washer Lid Switch fixes Whirlpool, Kenmore, Roper, Estate, and KitchenAid stacked washer/dryer laundry centers where the washer won't spin but still agitates and fills, the machine doesn't detect the lid is closed, or the washer won't start. Stackable washer lid switch assembly — 11" harness with round plugs, 7/8" block. Replaces WP3355806, WP3355806VP, 520880, AP6008072, AP2947199, AH11741201, EA11741201, EAP11741201, PS11741201, PS341529. Compatible with Whirlpool LTE5243/LTG5243 series, Roper RTE5243/RTG5243, and Kenmore thin twin models. Classic symptom: won't spin but still agitates.
Common Problems This Part Fixes
Washer won't spin but still agitates and fills — the classic lid switch failure symptom
Washer won't start at all — control not detecting a closed lid
Machine doesn't recognize the lid is closed even when it is
Lid switch body cracked from the lid being slammed over time
Internal switch contacts worn out — no longer signaling lid closed
Washer stops mid-cycle when it should transition to spin
Clothes coming out sopping wet because the spin cycle never runs
Intermittent operation — washer sometimes spins, sometimes doesn't, depending on lid position
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer lid switch directly replaces the following OEM and cross-reference part numbers:
WP3355806, ER3355806, 3355806, AP6008072, AWP47529, EAP11741201, PD00002599, PS11741201.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lid switch assembly is compatible with select stacked washer/dryer laundry centers (thin twin / space-saver units) from the following brands:
Whirlpool laundry centers — LTE5243DQ0-DQ8, LTE5243DT2-DT7, LTE5243DZ0/DZ1/DZ2, LTE5243BN0/BN1, LTG5243DQ0-DQC, LTG5243DT3/DT4/DT7/DT8, LTG5243DZ1/DZ2, LTG5243BN0/BN1 series and related
Whirlpool laundry centers — WET4024EW and related stacked models
Roper laundry centers — RTE5243BL0, RTE5243BW0, RTG5243BL0, RTG5243BW0 series
Kenmore / Sears laundry centers — thin twin models (110.9975820, 110088732791-11088754793, 11098573100-11098573800 series and related)
Estate, KitchenAid, Maytag, Admiral, Amana, Crosley, Inglis, Magic Chef — select stacked washer/dryer models
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Stackable washer lid switch assembly — detects whether the lid is open or closed and prevents spinning when the lid is open
Resolves the classic "won't spin but still agitates" symptom of lid switch failure
Restores the safety interlock and allows the washer to complete its spin cycle
Features an 11" wiring harness with round plugs and a 7/8" block connector
Designed for thin twin, space-saver, and other stacked washer/dryer laundry centers
Replaces WP3355806, WP3355806VP, 520880, AP6008072, AP2947199, AH11741201, EA11741201, EAP11741201, PS11741201, PS341529, and PD00002599
Compatible with Whirlpool LTE5243/LTG5243 series, Roper RTE5243/RTG5243 series, and Kenmore thin twin laundry centers, plus Estate, KitchenAid, Maytag, Admiral, Amana, Crosley, Inglis, and Magic Chef stacked units
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
3355806
OEM Part Number
WP3355806
Part Type
Stackable Washer Lid Switch Assembly
Condition
Aftermarket Replacement
Application
Stacked Washer/Dryer Laundry Centers (Whirlpool platform)
Harness Length
11" with round plugs
Block Connector
7/8"
Function
Prevents washer spin when lid is open
Location
Near top of washer, behind front panel
Compatible Brands
Whirlpool, Kenmore, Roper, Estate, KitchenAid, Maytag, Admiral, Amana, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves Unplug the appliance (or shut off the house circuit breaker) and turn off the hot and cold water supplies before beginning. Wear work gloves to protect your hands. On these stacked laundry centers, the lid switch is accessed by removing the front panel or the top panel — unscrew the screws along the edge of the panel and set it aside. Note: on some Whirlpool space-saver units, the hardest part of the job is getting the washer lid off to access the switch, so take your time and consult a model-specific diagram or video. Once the panel is off, locate the lid switch assembly near the top of the machine. Photograph the wiring harness connections before disconnecting anything. Unscrew the retaining screws that hold the lid switch in place, then carefully disconnect the wiring harness from the switch. Connect the wiring harness to the terminals on the new 3355806 switch, following the diagram on the switch for proper installation. Secure the new switch in place with the retaining screws. Reinstall the panel and secure it with the screws. Turn the water supplies back on, plug the washer back in, and test by closing the lid and running a cycle — the machine should advance to spin when the lid is shut. Tools needed: Multi-screwdriver, socket wrench (some models), work gloves.
Frequently Asked Questions
My washer agitates and fills but won't spin — is the lid switch the cause?
Yes — this is the single most common and telling symptom of a failed lid switch. The lid switch is a safety interlock that prevents the drum from spinning while the lid is open. When the switch fails (cracked body or worn internal contacts), the control never receives the "lid closed" signal, so it blocks the spin cycle as a safety measure — but agitation and fill still work because those don't require the lid interlock. If your washer runs through wash and agitate normally but stops when it should spin, leaving clothes sopping wet, the lid switch is the prime suspect. You can confirm by testing the switch for continuity with a multimeter when the lever is pressed.
What causes the lid switch to fail?
There are two common failure modes. First, the plastic body of the switch can crack over time from the lid being closed hard or slammed repeatedly — the repeated impact stresses the housing until it fractures. Second, the internal electrical contacts wear out from thousands of open/close cycles and can no longer make a reliable connection to signal that the lid is closed. Either way, the fix is the same: replace the lid switch assembly. To extend the life of the new switch, close the lid gently rather than letting it slam.
What's the difference between 3355806 and WP3355806?
These are the same lid switch across production revisions. 3355806 was the original part number and WP3355806 is the Whirlpool-era part number (with the "WP" prefix Whirlpool adopted) for the same switch. WP3355806VP is a variant packaging code. All are physically and functionally identical — if your laundry center's parts diagram shows any of these numbers, this listing is the correct replacement. The cross-references 520880, AP6008072, and PS11741201 are additional catalog identifiers for the same part.
Does this fit my thin twin or space-saver laundry center?
This lid switch is specifically designed for stacked washer/dryer laundry centers — the "thin twin," space-saver, and similar stacked units from Whirlpool and its related brands. It fits the Whirlpool LTE5243/LTG5243 series, Roper RTE5243/RTG5243 series, and a wide range of Kenmore thin twin models, among others. Check your model number against the compatibility list above. If your unit is a standalone (non-stacked) top-load washer, it likely uses a different lid switch — contact our support team with your model number and we'll confirm the correct part.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the fit, 11" harness with round plugs, 7/8" block connector, terminal configuration, and lid-detection function of the original WP3355806 lid switch used in compatible Whirlpool, Kenmore, Roper, Estate, and related stacked washer/dryer laundry centers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
WH13X10024 Genuine OEM Washer Water Valve
Replaces Part Numbers: WH13X10024, WH13X0086, WH13X0087, WH13X10004, WH13X10019, WH13X86, WH13X87, AH1155105, EA1155105, OEM15444478, AP3861119, PS1155105.
Description: This Water Inlet Valve is a Genuine OEM part for select GE washing machine models. This component is crucial for controlling the flow of water into the washer during the wash and rinse cycles. It works by opening and closing the solenoids to allow the appropriate amount of hot or cold water to enter the washing machine, based on the selected settings.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Genuine OEM WPW10446920 Dryer Push-To-Start Switch
The Genuine OEM WPW10446920 is a factory-original push-to-start switch manufactured by Whirlpool for use in Whirlpool, Maytag, Amana, Kenmore, Inglis, and other Whirlpool-built dryers that use a momentary push-button start control rather than a pull/rotary start knob. Pressing and releasing the button sends a signal to the timer or control board that begins the drying cycle; the switch itself does not stay latched, so the control electronics — not the switch — keep the dryer running after you let go.
When this switch fails, the dryer typically has power (the display and drum lights, if equipped, still work) but pressing Start does nothing, or the button feels mushy and requires several presses to register. As the genuine Whirlpool part, it ships with the exact factory-specified contacts, housing, and three-terminal wiring connector used on original production, so there's no fit or function guesswork. It directly replaces W10446920, 4446934, AP6021533, AWP51175, EAP11754857, OEM18064608, PD00038667, PS11754857. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The Genuine OEM WPW10446920 Dryer Push-To-Start Switch fixes Whirlpool, Maytag, Amana, Kenmore, and Inglis dryers that won't start when the Start button is pressed, even though the dryer otherwise has power. This is the factory-original Whirlpool switch — not an aftermarket equivalent — with a 3-terminal wiring connector. Replaces W10446920, 4446934, AP6021533, AWP51175, EAP11754857, OEM18064608, PD00038667, PS11754857. Classic symptom: display and lights work, but pressing Start produces no response at all.
Common Problems This Part Fixes
Dryer won't start when the Start button is pressed
Start button feels loose, mushy, or requires multiple presses to register
Dryer has power (lights/display work) but the motor never engages
Intermittent starting — sometimes works, sometimes doesn't
Audible click from the button with no response from the dryer
Start switch visibly cracked, stuck, or not returning after being pressed
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This push-to-start switch directly replaces the following OEM and cross-reference part numbers:
WPW10446920, W10446920, 4446934, AP6021533, AWP51175, EAP11754857, OEM18064608, PD00038667, PS11754857
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This push-to-start switch is compatible with select Whirlpool-built dryers from the following brands:
Whirlpool dryers (including 7MWED1650EQ0, 7MWGD1750EQ0, 7MWGD1850EI0 and related models)
Maytag dryers (select Whirlpool-built models, including MED4005SW0, MGD4005SW0)
Amana dryers (select models, including NED4700YQ0, NGD4700YQ1)
Kenmore dryers (select Whirlpool-built models, including 11062332511, 11072332510)
Inglis, KitchenAid, Jenn-Air, Magic Chef, and Admiral dryers (select Whirlpool-built models)
Note: This switch is specific to dryers with a push-to-start button. It is not used on models with a rotary or pull-to-start knob — those use a different start switch design. Always verify your appliance model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM push-to-start switch — factory-original fit, form, and function
Resolves "won't start," "mushy button," and "intermittent start" symptoms caused by switch failure
Momentary contact design — signals the timer/control board to begin the cycle
3-terminal wiring connector matching original factory harness
Direct-fit mounting to the original control panel opening
Replaces W10446920, 4446934, AP6021533, AWP51175, EAP11754857, OEM18064608, PD00038667, PS11754857
Compatible with Whirlpool, Maytag, Amana, Kenmore, and Inglis dryers
Genuine OEM part — factory-specified materials and electrical rating
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
WPW10446920
OEM Part Number
WPW10446920
Part Type
Dryer Push-To-Start Switch
Condition
Genuine OEM Replacement
Switch Type
Momentary Push Button
Terminals
3-terminal wiring connector
Application
Push-To-Start Dryer Control Panels
Compatible Brands
Whirlpool, Maytag, Amana, Kenmore, Inglis
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Access the control panel — on most models this means removing a few screws along the top or rear of the console, or releasing spring clips, and tilting or lifting the panel to expose the back of the start switch. Photograph the wiring before disconnecting. Unplug the 3-terminal wiring connector from the old switch — note the connector orientation. Depress the retaining tabs or remove the mounting screw(s) holding the switch in the control panel and push it out from the back. Install the new WPW10446920 switch into the same opening until it snaps or seats into place. Reconnect the wiring connector, matching your photos. Reassemble the control panel and secure it with its screws or clips. Plug the dryer back in and test by pressing Start — confirm the dryer begins its cycle. Tools needed: Phillips screwdriver, putty knife or flat-blade screwdriver (for spring clips, if applicable).
Frequently Asked Questions
My dryer has power but won't start when I press the button — is this the part?
This is the classic symptom of a failed push-to-start switch. If the display and any lights still work but pressing Start produces no response — not even a click or hum from the motor — the start switch is the most common cause. If you do hear a hum or click but the drum still doesn't turn, also check the thermal fuse and cycling thermostat, since a tripped thermal fuse can sometimes present with similar no-start symptoms.
Will this fit my dryer?
WPW10446920 and its cross-reference numbers fit a range of Whirlpool-built dryers across several brands, but only models with a push-to-start button — not a rotary or pull-to-start knob. Confirm fit using your dryer's exact model number before ordering, since the two start mechanisms are not interchangeable.
Is this a genuine Whirlpool part or an aftermarket equivalent?
This is the genuine, factory-original Whirlpool part — not an aftermarket equivalent. It ships with the same contacts, housing, and 3-terminal connector used in original production, so there's no guesswork on fit, feel, or electrical rating.
Do I need any special tools to install this?
No — just a Phillips screwdriver and, on some models, a putty knife or flat-blade screwdriver to release the control panel's spring clips. No soldering or wire splicing is required; the switch connects via its original 3-terminal plug.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine Whirlpool OEM Part ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WE04X20415 Dryer Genuine OEM Timer
The WE04X20415 is a genuine GE OEM electromechanical timer for GE electric and gas dryers, and also fits select Hotpoint and Kenmore models. This timer manages the duration of the drying cycle, running the dryer for the correct amount of time based on your selected setting and automatically shutting the machine off once the cycle is complete — that automatic shutoff is what prevents over-drying, which can damage fabrics and waste energy.
Rated with manufacturer designation 212D1233P005, measuring approximately 2-1/8"H x 3"W x 4-1/4"D. Over time, the timer's internal mechanical components can wear out, be damaged by power surges, or simply age past their reliable service life. A failing timer typically shows up as the dryer not shutting off at the end of a cycle, not running for the correct length of time, or the control knob feeling loose or failing to turn the mechanism properly. It directly replaces 3276788, WE04X20415-20PK, WE4M355, WE4M357, AGE25827, AP5805477, EAP9491767, PS9491767, PD00027041. As a genuine OEM part, the WE04X20415 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WE04X20415 Dryer Genuine OEM Timer fixes GE, Hotpoint, and Kenmore electric and gas dryers that won't shut off at the end of a cycle, don't run for the correct length of time, or have a knob that's stripped or won't turn properly. Replaces 3276788, WE04X20415-20PK, WE4M355, WE4M357, AGE25827, AP5805477, EAP9491767, PS9491767, PD00027041. Photograph the wiring before disconnecting the old timer, and transfer each wire one at a time to the new timer to make sure everything ends up in the correct position.
Common Problems This Part Fixes
Dryer won't shut off at the end of the cycle
Dryer doesn't run for the correct amount of time for the selected setting
Control knob feels loose, stripped, or won't turn the timer mechanism
Dryer running longer than expected, risking over-drying of fabrics
Timer that has stopped advancing through the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer directly replaces the following OEM and cross-reference part numbers:
WE04X20415, 3276788, WE04X20415-20PK, WE4M355, WE4M357, AGE25827, AP5805477, EAP9491767, PS9491767, PD00027041
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This dryer timer is compatible with select GE electric and gas dryers, and also fits select Hotpoint and Kenmore dryers built on the GE platform, including model numbers such as DBXR463GG2WW, DBXR300GG7WS, DBXR300GG0WS, DX4500GG4WW, DX4500GG5WW, DX4500GG6WW, DBSR463GG3WW, DLLLR33GJ1WW, DLLLR33GJ2WW, DHDSR46GG4WW, DHDSR46GG6WW, DHDSR46GG9WW, and DBLR333GG4WW.
Note: This is a different timer from our WE04X36457 listing and other similarly-numbered GE WE04X-prefix timers, each fitting a different set of models. These are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified timing mechanism and terminal layout
Manages drying duration and automatic shutoff
Resolves "won't shut off," "wrong cycle length," and "knob won't turn" symptoms caused by timer failure
Manufacturer designation 212D1233P005
Approximately 2-1/8"H x 3"W x 4-1/4"D
Direct drop-in replacement matching the original mounting and terminal layout
Replaces 3276788, WE04X20415-20PK, WE4M355, WE4M357, AGE25827, AP5805477, EAP9491767, PS9491767, PD00027041
Compatible with GE, Hotpoint, and Kenmore electric and gas dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Straightforward repair, typically about 15 minutes
Product Specifications
Part Number
WE04X20415
OEM Part Number
WE04X20415
Manufacturer Designation
212D1233P005
Part Type
Dryer Timer (Electromechanical)
Condition
Genuine OEM
Dimensions
2-1/8"H x 3"W x 4-1/4"D
Function
Manages drying duration and automatic shutoff
Repair Difficulty
Easy — approx. 15 minutes
Quantity
1 dryer timer
Compatible Brands
GE, Hotpoint, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Transfer Wires One At A Time Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Remove the screws from the back panel and set the panel aside. Remove the control knob from the front panel. Pull the old timer out and photograph the wiring connections before disconnecting anything. Transfer each wire one at a time from the old timer to the new WE04X20415, matching each connection exactly as photographed — moving them one at a time rather than all at once helps avoid mixing up positions. Secure the new timer in its mounting position, reconnect the knob to the front panel, and reattach the back panel. Restore power and test the timer by setting it for a few minutes and starting a cycle to confirm the dryer runs for the correct duration and shuts off with the buzzer at the end. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My dryer won't shut off at the end of the cycle. Is this the timer?
Yes, this is one of the most direct symptoms of a failing timer. The timer is responsible for automatically shutting the dryer off once the selected cycle duration is complete, so if that mechanism has worn out or jammed, the dryer can continue running well past when it should have stopped.
My control knob feels loose and won't turn the timer properly. Is that this same part?
It could be related. One customer found the knob stem had worn smooth and would no longer turn the timer mechanism at all — in that case, replacing the timer resolves the issue since the knob attaches directly to the timer's internal shaft.
Is this a hard repair to do myself?
No, several customers describe this as a straightforward repair. One account details removing the back panel screws, disconnecting the dryer, removing the front knob, photographing the wiring, and transferring each wire one at a time to the new timer — the whole process, including testing, took well under an hour, and even helped one customer celebrate an 80th birthday with a successful father-son repair.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original timing mechanism, terminal layout, and dimensions of the timer originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11457841 Washer Lid Latch Strike
The XPARTCO W11457841 is an aftermarket replacement washer lid latch strike compatible with select Whirlpool, Maytag, and Kenmore HE top-load washers — including the Whirlpool WTW5100, WTW5105, WTW6120, WTW7120, WTW8120, WTW8127 series, and the Maytag MVW6200, MVW6230, MVW7230, MVW7232, MVW8230 series. The lid latch strike is the plastic component attached to the underside of the washer lid that physically engages the lid lock mechanism when the lid is closed. As the lid lowers into place, the latch strike enters the lock slot and activates the lid switch — signaling the control board that the lid is securely closed and the washer is safe to start agitation and spin.
When the lid latch strike fails — typically by breaking off, cracking, or wearing down — the lid lock can't be properly activated, and the washer will not start, will stop mid-cycle, or will refuse to advance to the spin cycle. This W11457841 aftermarket replacement is built to OEM-equivalent specifications and supersedes the earlier W11091027. It also replaces 4959179, AP6987306, EAP16218028, PD00061788, and PS16218028. Installation is fast and simple — a counterclockwise twist removes the old strike, and a clockwise twist installs the new one. Installs in under 5 minutes, no special tools required.
Quick Answer
The XPARTCO W11457841 Washer Lid Latch Strike fixes Whirlpool, Maytag, and Kenmore HE top-load washers that won't start, won't lock the lid, stop mid-cycle, or won't advance to spin because the lid strike is broken or worn. Plastic latch strike that attaches to the underside of the washer lid and activates the lid lock and switch. Twist-in installation. Genuine OEM. Replaces W11091027, 4959179, AP6987306, EAP16218028, PD00061788, PS16218028. Compatible with Whirlpool WTW5100/5105/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series.
Common Problems This Part Fixes
Washer not starting — lid latch strike not engaging the lid lock
Lid won't lock at the start of the cycle
Washer stops mid-cycle with a lid-related fault
Washer fills with water but won't agitate or advance to spin
Lid latch strike visibly broken, cracked, or missing on the underside of the lid
Latch strike worn down — physically fits the lock slot but no longer activates the lid switch
Repeated lid lock errors despite the lid appearing to close normally
Replaces Part Numbers
This washer lid latch strike directly replaces the following OEM and cross-reference part numbers:
W11457841, W11091027, AP6987306, AWP44638, PD00061788, EAP16218028, PS16218028.
W11457841 is the current production part superseding W11091027. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This lid latch strike is compatible with select HE top-load washers from the following brands and series:
Whirlpool top-load washers — WTW5100HC0, WTW5100HC1, WTW5100HC2, WTW5100HW0, WTW5100HW1, WTW5100HW2 series
Whirlpool top-load washers — WTW5105HC0, WTW5105HC1, WTW5105HC2, WTW5105HW0, WTW5105HW1, WTW5105HW2 series
Whirlpool top-load washers — WTW6120HC0, WTW6120HC1, WTW6120HC2, WTW6120HW0, WTW6120HW1, WTW6120HW2 series
Whirlpool top-load washers — WTW7120HC0, WTW7120HW0 series
Whirlpool top-load washers — WTW8120HC0, WTW8120HW0 series
Whirlpool top-load washers — WTW8127LC0, WTW8127LC1, WTW8127LW0 series
Maytag top-load washers — MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6200KW3 series
Maytag top-load washers — MVW6230HC0, MVW6230HC1, MVW6230HC2, MVW6230HW0, MVW6230HW1, MVW6230HW2 series
Maytag top-load washers — MVW6230RHW0, MVW6230RHW1, MVW6230RHW2 series
Maytag top-load washers — MVW7230HC0, MVW7230HW0, MVW7230HW1 series
Maytag top-load washers — MVW7232HC0, MVW7232HW0, MVW7232HW2 series
Maytag top-load washers — MVW8230HC0 series
Kenmore / Sears top-load washers (Whirlpool-built — select 110-series models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Aftermarket replacement built to OEM-equivalent quality standards — direct fit for compatible Whirlpool platform washers
Plastic latch strike attaches to the underside of the washer lid and engages the lid lock mechanism when the lid closes
Activates the lid switch to signal the control board that the lid is securely closed and the washer is safe to start
Twist-in/twist-out installation — no tools or hardware required; counterclockwise to remove, clockwise to install
Current production part — directly supersedes W11091027
Replaces W11091027, 4959179, AP6987306, EAP16218028, PD00061788, and PS16218028
Compatible with Whirlpool WTW5100/5105/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series HE top-load washers, plus select Kenmore Whirlpool-built models
Fast DIY repair — installs in under 5 minutes
Product Specifications
Part Number
W11457841
Supersedes
W11091027
Part Type
Washer Lid Latch Strike
Condition
Aftermarket Replacement
Application
HE Top-Load Washers (Whirlpool/Maytag/Kenmore platform)
Material
High-strength plastic
Installation
Twist-in (clockwise) / twist-out (counterclockwise) — no tools required
Mounting Location
Underside of washer lid
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves to protect your hands. Open the washer lid and locate the lid latch strike on the underside of the lid — it's the small plastic peg that drops into the lock slot when the lid is closed. To remove the old latch strike: rotate it counterclockwise until the retaining tab breaks free and pulls back, then pull the old latch strike straight out. To install the new W11457841: align it with the mounting hole in the same orientation as the old one, and rotate clockwise until you hear or feel the retainer tab click into place. Close the lid and confirm the latch strike engages the lock slot properly. Restore power, start a test cycle, and confirm the lid locks and the washer begins normal operation. Tools needed: work gloves only — no tools required for the strike itself.
Frequently Asked Questions
What's the difference between the lid strike, lid lock, and lid switch?
These three components work together as a safety system. The lid latch strike (W11457841) is the small plastic peg attached to the underside of the lid that physically enters the lock slot when the lid closes. The lid lock is the mechanism in the washer cabinet that grips the strike and physically locks the lid closed during the spin cycle. The lid switch is the electrical sensor inside the lock assembly that signals the control board when the strike is engaged. If the strike is broken or missing, none of the three can do their job — even if the lock and switch are working perfectly. Replacing just the strike often resolves "won't start" issues without needing to replace the more expensive lock assembly.
What is the difference between W11457841 and W11091027?
These are the same lid latch strike across production revisions. W11091027 was the earlier OEM part number, and W11457841 is the current part number that superseded it. Both are physically and functionally identical — if your washer's parts diagram shows W11091027, the W11457841 is the correct current replacement, and this aftermarket part covers both numbers.
My washer won't start and the lid seems to close normally — could this be the strike?
Yes, this is one of the most common symptoms of lid latch strike failure on compatible Whirlpool and Maytag washers. Even though the lid appears to close, if the strike has cracked or worn down it may not physically engage the lock or activate the switch correctly. Visually inspect the latch strike on the underside of the lid — if it's broken, missing, or chipped, replacement is straightforward. If the latch strike looks intact and the washer still won't start, the lid lock assembly itself or the wiring harness may need attention.
Do I really not need any tools to install this?
Correct — the W11457841 lid latch strike uses a twist-in design with no screws or hardware. To remove the old latch strike, rotate it counterclockwise until the internal retaining tab breaks free, then pull it out. To install the new one, push it into the mounting hole and twist clockwise until it clicks into place. The whole replacement typically takes under 5 minutes once you have the new part in hand. Work gloves are recommended to protect your hands while gripping the small plastic part, but no other tools are needed.
Is this a Genuine OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, twist-in mounting design, and lid switch activation function of the original W11457841 lid latch strike used in compatible Whirlpool, Maytag, and Kenmore HE top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
