DC66-00777A Washer Genuine OEM Pulsator Cap – Compatible with Samsung Washers
Product Description
Keep your washer performing like new with the DC66-00777A Washer Genuine OEM Pulsator Cap. This factory-approved cap covers the central bolt on the pulsator (washplate), preventing water, detergent, and debris from entering the hub assembly. A missing or cracked cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this Genuine OEM part ensures a perfect fit, watertight seal, and long-lasting protection.
Replaces Part Numbers
DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312.
Compatibility
This Genuine OEM pulsator cap fits select Samsung top-load washers.
Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, WA45H7000AW/A2, and WA50M7450AW/A4.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-approved part ensures perfect fit and reliable performance
💧 Protective Design – Seals the washplate bolt area to prevent leaks and corrosion
🔇 Reduces Noise – Helps maintain balanced, quiet spin cycles
🛠️ Tool-Free Installation – Snaps securely into place in seconds
🛡️ Fixes Common Issues – Replaces missing, cracked, or leaking pulsator caps
📐 Product Specification
Part Number: DC66-00777A
Component Type: Washer Pulsator (Washplate) Cap
Material: High-grade molded plastic
Color: Silver or gray finish (varies by model)
Mounting: Snap-fit installation over pulsator bolt
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Always unplug the washer before performing any maintenance to prevent electrical shock.
Steps:
Open the washer lid and locate the pulsator (washplate) center.
Remove any old or damaged cap remnants.
Align the new DC66-00777A cap with the bolt opening.
Press firmly until it clicks securely into place.
Close the lid and test the washer.
⏱️ Time Required: Less than 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Protect your washer from moisture and debris — Add to Cart Now for a perfect, factory-quality fit!
W11700916 Washer Genuine OEM Door Latch
The W11700916 is a genuine Whirlpool OEM lid lock assembly for Whirlpool top-load washers, and also fits select Maytag and Kenmore models. This assembly ensures the washer's lid remains securely locked during the wash and spin cycle, preventing access to the moving parts inside while the drum is in motion and confirming to the control board that the lid is safely closed before the cycle can proceed.
This part is a superseding design, replacing the earlier W11394572 lid latch. Over time, the internal locking mechanism can wear out or fail electrically. A failing lid lock typically shows up as the lid not locking properly during a cycle, or the washer failing to start at all, since the control board won't proceed without confirmation the lid is securely closed. It directly replaces W11543566, W11394572, W11032875, AP7219279, and PS17217010.
Quick Answer
The W11700916 Washer Genuine OEM Door Latch fixes Whirlpool, Maytag, and Kenmore top-load washers where the lid isn't locking properly, or the washer won't start at all. Replaces W11543566, W11394572, W11032875, AP7219279, PS17217010. This is a newer superseding lid lock design — if your washer's original latch is one of the numbers it replaces, this is the correct current part to order.
Common Problems This Part Fixes
Lid isn't locking properly during the wash or spin cycle
Washer won't start at all
Lid pops open or unlocks unexpectedly mid-cycle
Cycle stalls at the start and won't proceed to wash or spin
Washer pumps or agitates but won't spin because the lid isn't sensed as locked
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer door latch directly replaces the following OEM and cross-reference part numbers:
W11700916, W11394572, W11032875, W11543566, EG-380900, AP7219279, AWP46729, EAP17217010, OEM21657846, PD00085319, PS17217010
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This lid lock assembly is compatible with select Whirlpool top-load washers, and also fits select Maytag and Kenmore washers built on the Whirlpool platform, including model numbers such as:
MVW8230HC0, MVW7230HW0, MVW7230HC0, MVW7232HC0, MVW7232HW0
MVW6200KW0, MVW6230RHW0, MVW6230HC1, MVW6230HW1, MVW6230HC0, MVW6230HW0
WTW8120HC0, WTW8120HW0
WTW7120HC0, WTW7120HW0
WTW6120HC1, WTW6120HW1, WTW6120HW0, WTW6120HC0
WTW5100HC0, WTW5100HW0, WTW5105HW0, WTW5105HC0
Note: This is a distinct lid lock design from other Whirlpool washer latches already in our catalog, such as our W10404050 and W10810403 listings — Whirlpool has used multiple different lid lock designs across its top-load washer lineup over the years. Always verify your full model number before ordering, or match the exact part number printed on your old latch. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified locking mechanism
Confirms lid closure to the control board and locks the lid during wash/spin
Resolves "lid won't lock," "washer won't start," and "lid pops open mid-cycle" symptoms
Superseding design — current replacement for the earlier W11394572 latch
Direct drop-in replacement — matches the original mounting and harness connector
Replaces W11543566, W11394572, W11032875, AP7219279, and PS17217010
Compatible with Whirlpool, Maytag, and Kenmore top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11700916
Part Type
Washer Lid Lock Assembly / Door Latch
Condition
Genuine OEM
Brand
Whirlpool
Application
Top-Load Washers
Function
Locks the lid during wash/spin and confirms closure to the control board
Supersedes
W11394572
Repair Difficulty
Easy to Moderate — basic hand tools, novice repair experience
Quantity
1 lid lock assembly
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Open the washer lid and locate the lid lock assembly mounted on its underside, typically secured with a couple of screws. Photograph the wiring harness connection before disconnecting anything. Remove the mounting screws, disconnect the wiring harness connector from the old assembly, and pull it free. Install the new W11700916 in the same position, reconnect the wiring harness connector fully, and secure the mounting screws. Restore power and run a test cycle to confirm the lid locks securely, the washer starts and completes a full cycle, and the lid unlocks normally once finished. Tools needed: multi-screwdriver, work gloves.
Frequently Asked Questions
My washer's lid isn't locking properly. Is this the part I need?
Yes, this is the classic symptom this assembly addresses. Since the control board won't proceed into the wash or spin cycle without confirmation the lid is closed and locked, a worn or failing lock assembly can prevent the washer from starting or cause it to stop mid-cycle if the lock fails while running.
My old part number is W11394572. Is this the same thing?
This W11700916 is the current superseding part for W11394572 — Whirlpool has updated the part number, and this is the correct part to order now even if your washer's original latch was labeled with the older number.
Is this the same latch as other Whirlpool washer lid locks you sell?
Not necessarily — Whirlpool has used several different lid lock designs across its top-load washer lineup over the years, including other designs found elsewhere in our catalog. Always match your exact original part number, or your full washer model number, rather than assuming any "Whirlpool lid lock" will fit your machine.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original locking mechanism and wiring harness configuration of the lid lock assembly designed for your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
17438000001584 Genuine OEM Midea Dryer Belt Safety Switch
The 17438000001584 is a Genuine OEM Midea replacement belt safety switch compatible with select Midea, Criterion, and Insignia electric and gas dryers. This safety switch is positioned near the drive belt and tensioner pulley assembly, where it monitors belt-related conditions and interrupts electrical flow to the motor or heating circuit if a fault or unsafe condition is detected — such as a broken or severely slipped drive belt. This is a key safety mechanism: if the belt fails and the drum can no longer be safely driven, this switch helps prevent the motor from continuing to run unsafely or the heater from continuing to operate without normal airflow from drum rotation.
When this switch fails, the dryer may not start, may shut off unexpectedly during operation, or may fail to heat even though other components test correctly. As a Genuine OEM part manufactured by Midea to factory specifications, the 17438000001584 measures 2"L x 2"W x 3"H and weighs approximately 1 oz. It is found on the same parts diagram as the drive belt, tensioner pulley assembly, and drum support components on compatible models. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The 17438000001584 Genuine OEM Midea Dryer Belt Safety Switch fixes Midea, Criterion, and Insignia dryers that won't start, shut off unexpectedly during operation, or fail to heat despite other components testing normally. Mounted near the drive belt and tensioner pulley assembly — interrupts power if a fault or unsafe belt condition is detected. Dimensions: 2"L x 2"W x 3"H, approx. 1 oz. Genuine OEM. Compatible with Midea MLG45N3BMG, Criterion CDG41N1AW, CDG45N1AW, and related Midea-platform dryer models.
Common Problems This Part Fixes
Dryer not starting — safety switch not signaling normal belt/drive conditions
Dryer shutting off unexpectedly partway through a cycle
Dryer not heating despite the heating element, thermostat, and other components testing normal
Dryer behaving erratically after a drive belt failure or replacement
Intermittent power interruption during operation traced to this switch area
Switch contacts failing continuity test with a multimeter
Replaces Part Numbers
This belt safety switch directly replaces the following part number:
17438000001584, AP7157511, PS18188483
This is the Midea manufacturer part number used across multiple Midea, Criterion, and Insignia dryer models. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This belt safety switch is compatible with select Midea, Criterion, and Insignia dryers, including:
Midea MLG45N3BMG gas dryer
Midea MLG45N1BWW, MLG45N3BWW, and related MLG gas dryer series
Midea MLE series electric dryers (select models)
Criterion CDG41N1AW, CDG45N1AW gas dryers (air vent series)
Insignia electric and gas dryers built on the Midea platform (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance
Safety switch mounted near the drive belt and tensioner pulley assembly
Interrupts electrical flow to the motor or heating circuit if a fault or unsafe belt-related condition is detected
Compact design: 2"L x 2"W x 3"H, approximately 1 oz
Compatible with Midea MLG/MLE series, Criterion CDG series, and Insignia Midea-built dryers
Installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
17438000001584
Part Type
Dryer Belt Safety Switch
Condition
Genuine OEM
Application
Electric and Gas Dryers (Midea platform)
Dimensions
2"L x 2"W x 3"H
Weight
Approximately 1 oz
Location
Near drive belt and tensioner pulley assembly
Compatible Brands
Midea, Criterion, Insignia
Installation Notes
⚠️ Unplug Dryer Before Starting (Shut Off Gas First on Gas Models) — Wear Work Gloves Disconnect power before beginning (and shut off the gas supply first if you have a gas dryer model). Wear work gloves — there are sharp metal edges inside the dryer cabinet. Remove the lint filter housing screws, release the top panel locking clips with a putty knife, and lift the top panel. Remove the front panel to access the drum, drive belt, and tensioner pulley assembly. Locate the belt safety switch in this area — refer to your model's parts diagram to confirm its exact mounting position, as it is positioned near the belt and tensioner pulley support. Photograph the wire connections before disconnecting. Disconnect the wires from the old switch, remove the mounting screw or clip, and pull the switch free. Install the new 17438000001584 switch in the same position, secure the mounting hardware, and reconnect the wires. While this area is open, it's a good time to inspect the drive belt and tensioner pulley for wear, since this switch is related to belt operation. Reassemble the front panel and top panel in reverse order. Restore gas and power, and run a test cycle to confirm the dryer starts and runs normally. Tools needed: Phillips screwdriver, putty knife, work gloves.
Frequently Asked Questions
What does the belt safety switch do?
The belt safety switch monitors belt-related conditions near the drive belt and tensioner pulley assembly and interrupts electrical flow to the motor or heating circuit if it detects a fault or unsafe condition — such as a broken or badly slipped drive belt. This is a protective measure: if the belt has failed and the drum can no longer be driven normally, the switch helps prevent continued unsafe operation of the motor or heater. It works alongside other safety components in the dryer (like the door/cover switch and thermal limiters) as part of an overall safety system.
My dryer just had a belt replacement and now isn't working right — could this switch be involved?
It's possible. Since this switch is positioned near the belt and tensioner pulley assembly, it can be disturbed, dislodged, or its connector improperly reseated during a belt replacement. If your dryer is behaving erratically after a recent belt repair — failing to start, shutting off, or not heating — check that this switch's connector is fully seated and that the switch itself wasn't damaged during the repair. If the connector is good and the switch tests as an open circuit with a multimeter, it has failed and needs replacement.
How do I test if this safety switch has failed?
Unplug the dryer, disconnect the switch's wire connector, and set your multimeter to continuity mode. With the belt and tensioner mechanism in their normal operating position, the switch should show closed continuity (allowing current to flow). If the switch shows an open circuit when it should be closed, it has failed and needs replacement. Always refer to your specific model's wiring diagram to confirm the expected switch state, since exact behavior can vary by dryer model.
Does this switch fit Insignia and Criterion dryers as well as Midea?
Yes — Insignia (Best Buy) and Criterion (Sears/Kmart) are house brands whose dryers in certain configurations are manufactured by Midea and use the same internal components, including this belt safety switch. Confirmed Criterion models include the CDG41N1AW and CDG45N1AW gas dryers. Always verify your specific model number before ordering to confirm compatibility.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same belt safety switch installed in compatible Midea, Criterion, and Insignia dryers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
W11205048 Washer Genuine OEM Water Valve
Fits select Kenmore, Maytag, Whirlpool top load washer models.
Replaces Part Numbers: W11205048, 4814041, W10843663, AP6327347, PS12349203.
Description: This Water Inlet Valve is a Genuine OEM part for specific Whirlpool washing machine models. This valve controls the flow of water into the washer, allowing it to fill with the correct amount of water during the wash and rinse cycles. Over time, the water inlet valve can become clogged with debris, develop electrical issues, or wear out, leading to problems with the water flow. Causes of a bad water inlet valve include mineral buildup from hard water, internal component failure, or damage to the valve body.
AHA72973309 Genuine OEM LG Washer Drain & Circulation Pump Assembly
The AHA72973309 is a genuine LG OEM drain and circulation pump assembly for LG and select Kenmore front-load washers. This is a dual-purpose pump — an Askoll M120-2 unit — that handles two separate jobs from one motor and housing. During the drain portion of the cycle, it pumps wastewater out of the tub and out through the drain hose. During the wash and rinse portions, it switches roles and recirculates water from the bottom of the tub back up through the dispenser and spray nozzle, showering it back over the load. That recirculation spray is what lets LG's front-load washers clean effectively with less water than an older top-load design would need.
Because this single assembly performs both functions, a failure here can show up in more than one way: standing water left in the tub after a cycle, a washer that won't complete its drain step, unusual grinding or humming noise, or reduced wash performance if the recirculation spray isn't working even though draining still seems fine. Common causes include debris such as coins, buttons, or lint lodged in the impeller, general wear and tear on the motor bearings, or an electrical failure in the pump motor itself. It directly replaces AP5676608, 2659237, AHA72973304, and PS7788830. As a genuine OEM part, the AHA72973309 is manufactured by LG to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The AHA72973309 Genuine OEM LG Washer Drain & Circulation Pump Assembly fixes LG and select Kenmore front-load washers with standing water left in the tub after a cycle, a washer that won't drain, unusual grinding or humming noise, or reduced wash performance from a weak recirculation spray. Askoll M120-2 dual-purpose pump — handles both draining and mid-cycle water recirculation. Replaces AP5676608, 2659237, AHA72973304, PS7788830. Installation is average difficulty, 30 to 60 minutes — and on many models it's accessible through the front panel without needing to tip the washer over.
Common Problems This Part Fixes
Standing water left in the tub after a cycle finishes
Washer won't drain, or drains very slowly
Drainage-related error code displayed on the control panel
Unusual grinding, humming, or rattling noise during the drain or wash portion of the cycle
Reduced wash performance — clothes not getting as clean, possibly from a weak recirculation spray
Washer stalling mid-cycle at the drain step
Water leaking from underneath the washer near the pump housing
Pump that hums but doesn't seem to move water — possible clog or seized impeller
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drain and circulation pump assembly directly replaces the following OEM and cross-reference part numbers:
AHA72973309, AHA72973304, AP5676608, 2659237, ALG53336, PD00024680, PS7788830
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain and circulation pump assembly is compatible with select LG front-load washers, and also fits select Kenmore and Kenmore Elite front-load washers built on the LG platform.
Note: This is a dual-function drain-and-circulation assembly specific to LG's front-load platform, built around the Askoll M120-2 pump. It is not a drain-only pump, and it is not intended for top-load washers, which use a different pump design. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified motor, impeller, and housing design
Dual-purpose Askoll M120-2 pump — drains the tub and recirculates wash water through the dispenser spray nozzle
Resolves "standing water in the tub," "won't drain," "grinding or humming noise," and "reduced wash performance" symptoms caused by pump failure
Includes all necessary wiring and mounting hardware for a complete replacement
Direct drop-in replacement — no modification required
Replaces AP5676608, 2659237, AHA72973304, and PS7788830
Compatible with LG and select Kenmore/Kenmore Elite front-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Average installation difficulty — typically 30 to 60 minutes
Product Specifications
Part Number
AHA72973309
Part Type
Washer Drain & Circulation Pump Assembly
Condition
Genuine OEM
Brand
LG
Pump Model
Askoll M120-2
Function
Drains tub water and recirculates wash water through the dispenser spray
Kit Contents
Pump assembly with wiring and mounting hardware
Application
Front-Load Washers (LG-Built)
Repair Difficulty
Average — 30 to 60 minutes
Quantity
1 pump assembly
Compatible Brands
LG, select Kenmore, Kenmore Elite
Installation Notes
⚠️ Unplug Washer And Shut Off Water Before Starting — Drain Residual Water First Disconnect power at the outlet or shut off the circuit breaker, and close the water supply valves before beginning. Wear work gloves. Place towels down and have a shallow pan ready, since the pump housing will hold residual water even after a completed cycle — draining this into a pan before disconnecting hoses will save you a mess. On many models, this pump is fully accessible by removing the front lower access panel or kick plate, without needing to tip the washer onto its back — check this first, since it can save significant time and effort compared to some online guides that recommend tipping the unit. Photograph the hose routing and wiring connections before disconnecting anything. Disconnect the two hose clamps connecting the pump to the tub and drain hose, and unplug the electrical connector from the pump motor. Remove the mounting screws or clips securing the pump assembly and lift it free, checking the impeller area for coins, buttons, or debris while it's out — clearing a clog here may have been the actual cause of the original symptom. Install the new AHA72973309 in the same orientation, reconnect both hoses with their clamps, and reconnect the electrical connector fully. Reinstall the front access panel, restore water and power, and run a short cycle to confirm normal draining, recirculation spray, and no leaks around the pump housing. Tools needed: Phillips screwdriver, hose clamp pliers, shallow pan or towels, work gloves.
Frequently Asked Questions
Do I really need to tip the washer over to replace this pump?
Not necessarily — check your model first. While a lot of general online guidance recommends tipping the washer onto its back to access the pump from underneath, many LG and Kenmore Elite front-load models make this pump fully accessible through the front lower access panel or kick plate instead, without any tipping required. It's worth removing that panel first and seeing what you find before committing to the more involved tip-over approach.
Why does this one pump handle both draining and something during the wash cycle?
LG's front-load washers use this same Askoll pump for two different jobs at different points in the cycle: pumping wastewater out during the drain step, and recirculating water from the bottom of the tub back up through the dispenser and spray nozzle during wash and rinse to shower it over the load. That recirculation spray is part of how these washers clean effectively while using less water than an older top-load design. Because one pump does both jobs, a failure can affect draining, wash performance, or both, depending on what's actually gone wrong inside it.
There's water left in the tub after every cycle. Is this definitely the pump?
It's one of the most common causes, but check the easy things first. A clogged drain filter or a kinked drain hose can produce the same "won't drain" symptom and cost nothing to fix. If the filter and hose are clear and water is still standing in the tub, or if the pump hums but doesn't seem to move any water, the pump assembly itself has likely failed.
My washer drains fine but clothes aren't coming out as clean. Could this pump be the cause?
Possibly. Since this same assembly also handles the recirculation spray during wash, a partial failure can leave draining intact while weakening or eliminating that spray function, which reduces how effectively detergent and water reach the load. If drainage is normal but wash performance has noticeably declined, it's worth having this pump checked as one possible cause alongside things like detergent dosing and water hardness.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It includes the same Askoll M120-2 dual-function pump design, wiring, and mounting configuration as the drain and circulation pump assembly originally installed in your front-load washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
(4 Pack) XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE
Product Description
Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing.
Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277.
Compatibility:
Compatible with models including but not limited to:
LG: LSC24971ST/00, LRSC21934SW
Kenmore: 79571039010, 79571039011, 79578789801
GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers.
🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals.
💪 Reliable Performance: Ensures precise activation of ice and water dispensing.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues.
Product Specification
Part Number: XPARTCO 6600JB3001E
Component Type: Refrigerator dispenser micro switch
Material: Plastic housing, metal contacts
Electrical Rating: 16A 1/2HP, 125/250VAC
Mounting: Snap-in or screw-mounted, 1/4" terminals
Operating Conditions: Suitable for refrigerator dispenser environments
Compliance: UL listed, Prop 65 warning for California.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today!
Add to cart now for a reliable fix!
5221ER1003M Genuine OEM Washer Water Valve - Compatible with LG, Kenmore
Product Description
Restore your washer’s performance with the 5221ER1003M Genuine OEM Washer Water Valve. This LG-manufactured cold water inlet valve assembly is designed as a replacement for select LG and Kenmore washing machines. It controls the flow of cold water into the washer during wash and rinse cycles, ensuring proper filling and efficient operation. This part addresses issues like leaking water, failure to fill, or overflow, often caused by a faulty or clogged valve.
Note: Includes (1) cold water inlet valve assembly with three solenoids (hose and clamps not included). Disconnect power and water supply before installation. Verify compatibility with your washer model.
Replaces part numbers: 5221ER1003M, 4869495, PD00050119, EAP12579227, AP6334246, PS12579227.
Compatibility:
Compatible with select washer models, including but not limited to:
LG: WM2016CW, WM2077CW, WM2101HW, WM2277HW, WM2301HR, WM2301HW, WM2455HG, WM2487HWM, WM2601HW, WM2701HV, WM2801HRA
Kenmore: 796.40272900, 796.40441900, 796.41022900, 796.41028900, 796.41472210
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore washing machines.
🔧 Specifications: Genuine OEM LG cold water inlet valve with three solenoids, 110-120V, 60Hz.
💪 Reliable Performance: Controls cold water flow for wash, pre-wash, and bleach dispenser functions.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves leaking, failure to fill, or overflow issues.
Product Specification
Part Number: 5221ER1003M
Component Type: Washer cold water inlet valve assembly
Material: Plastic and metal
Electrical Specs: 3 Way, DC 12V, three solenoids, standard hose fitting inlet, three water outlets.
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and water supply before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running smoothly today!
Add to cart now for a reliable fix!
WB24X25013 Genuine OEM GE Range Surface Burner Infinite Switch Replaces WB24X47186.
The WB24X25013 is a genuine GE OEM infinite control switch for a dual (bridge) surface element on GE, Hotpoint, and select Kenmore electric ranges — the kind of burner with an inner coil and an outer coil that can be run together for a large pot or as the inner coil alone for a small pan. Because it's governing two coil zones instead of one, this switch uses six terminal connections rather than the three or four found on a standard single-element infinite switch, and it mounts to the control panel with a distinctive figure-8 style shaft and two female mounting holes.
Like any infinite switch, it doesn't have fixed heat positions — instead it rapidly cycles power to the element(s) on and off at a ratio set by the knob, giving continuous heat adjustment from warm to high rather than a handful of steps. Rated for 240VAC at 15 amps. Over years of cycling, the internal contacts on a switch like this wear, pit, or weld together, and boilovers or spills can corrode the switch body and cause it to fail. A worn switch on a dual-element burner can produce an unusually wide symptom set: the whole burner may fail, or just the outer ring may stop responding while the inner coil still works, or the burner may stay on continuously regardless of the knob position. It directly replaces WB24X47186, 191D4774P005, AP5999509, PS11729102, EAP11729102, and 4464832. As a genuine OEM part, the WB24X25013 is manufactured by GE to factory specifications — guaranteed fit, materials, and performance.
Quick Answer
The WB24X25013 Genuine OEM GE Range Surface Burner Infinite Switch fixes GE, Hotpoint, and Kenmore electric ranges with a dual (bridge) element burner where the burner won't turn on or off, only the outer ring fails to work while the inner coil still heats, the burner stays on continuously, or heat can't be adjusted. Six-terminal switch, figure-8 shaft, 240VAC / 15A. Replaces WB24X47186, 191D4774P005, AP5999509, PS11729102, EAP11729102, 4464832. Not the same switch as a standard single-element infinite switch — this one is specific to dual/bridge burners with an inner and outer coil.
Common Problems This Part Fixes
Dual-element burner won't turn on at all when the knob is turned
Outer ring of a dual/bridge element won't activate while the inner coil still works
Burner won't turn off — stays hot even with the knob at the off position
Burner stuck at one heat level regardless of where the knob is set
No ability to adjust temperature — always full blast or always low
Intermittent burner operation — works sometimes, not others
Knob feels loose, gritty, or doesn't turn smoothly through its range
Burner failure that followed a boilover or liquid spill on the control panel
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This range surface burner infinite switch directly replaces the following OEM and cross-reference part numbers:
WB24X25013, WB24X47186, 191D4774P005, AGE1543754, AP7216136, PS11729102, PS17872685, EAP11729102, 4464832, 191D4774P005, MDSA-W767-GEM
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This dual-element infinite switch is compatible with select GE, Hotpoint, and Kenmore electric ranges equipped with a dual (bridge) surface element, including model families such as:
GE JB6, JB7, and JB8 series electric ranges (including JB630, JB640, JB645, and JB655)
GE JBS series electric ranges
GE JS6 and JS7 series electric ranges (including the JS760 series)
GE GRS and GRF series electric ranges
Hotpoint electric ranges (select GE-built models)
Select Kenmore electric ranges built on the GE platform
Verified model numbers include: JB645RK6SS, JS760EP6ES, JS760DP6WW, JS760SP7SS, JS760DP7WW, JS760SP6SS, JS760FP7DS, JS760FP6DS, JS760EP7ES, JB860EJAES, JB860FJADS, and GRS500PV1SS.
Note: This is a six-terminal switch built specifically for a dual (bridge) element with a figure-8 style shaft and two female mounting holes — it is NOT interchangeable with a standard single-element infinite switch such as the WB24T10029 or WB24T10025, which use fewer terminals and a different shaft profile. Fitting a standard single-element switch to a dual-element burner circuit will not correctly control both coil zones. Always verify your full model number and confirm the affected burner is a dual/bridge element before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified contact design for dual-element switching
Six-terminal design controls both the inner coil and outer ring of a dual (bridge) surface element
Figure-8 style shaft with two female mounting holes matched to the original control panel bracket
Infinite switch design allows continuous heat adjustment rather than a handful of fixed positions
Rated 240VAC at 15 amps
Resolves "burner won't turn on," "outer ring not working," "won't turn off," and "stuck at one heat level" symptoms caused by worn or corroded switch contacts
Direct drop-in replacement — mounts to the same control panel bracket and wiring harness
Replaces 191D4774P005, AP5999509, PS11729102, EAP11729102, and 4464832
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WB24X25013
Part Type
Range Surface Burner Infinite Switch (Dual/Bridge Element)
Condition
Genuine OEM
Brand
GE
Element Type Controlled
Dual (bridge) surface element — inner coil + outer ring
Terminal Connections
6
Shaft Style
Figure-8
Mounting
Two female mounting holes
Voltage
240VAC
Amperage
15A
Function
Cycles element power to allow continuous (infinite) heat adjustment across both coil zones
Quantity
1 switch
Compatible Brands
GE, Hotpoint, select Kenmore
Installation Notes
⚠️ 240V Circuit — Unplug Range Or Shut Off Breaker Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning — this switch operates on a 240V circuit, and working on it while powered presents a serious shock hazard. Wear work gloves. Remove the burner knob (it typically pulls straight off, though some models use a small retaining clip) then remove the screws securing the control panel or backsplash to reach the switch from behind. Photograph the wiring before disconnecting anything — this is a six-terminal switch, and getting even one wire out of place can miswire the inner coil, the outer ring, or both. Label each wire as you remove it. Disconnect all six terminal connections from the old switch, then remove the mounting screws from the two mounting holes and pull the switch free from its figure-8 shaft opening. Install the new WB24X25013 in the same orientation, reconnect each of the six wires exactly as labeled, and secure the mounting hardware. Reinstall the control panel or backsplash, press the knob back onto the shaft, restore power, and test the burner at every knob position — confirm the inner coil and outer ring both activate correctly (together and, if your model supports it, with the outer ring switched off independently) before considering the repair complete. Tools needed: Phillips screwdriver, nut driver, wire terminal pliers (helpful but optional), work gloves.
Frequently Asked Questions
How do I know if my burner uses a dual-element switch like this one?
Look at the burner element itself: a dual (bridge) element has two distinct coil rings — a smaller inner coil and a larger outer ring — usually with a separate control or a knob position that lets you activate just the inner coil for a small pan or both rings together for a large pot. A standard single-ring element has only one coil and uses a simpler switch with fewer terminals. If your range has this two-ring burner design, the WB24X25013 (or the exact switch behind it) is the correct type — but always confirm your model number, since dual-element switches vary by range generation.
Only the outer ring of my dual burner doesn't work. Is it the switch or the element?
It could be either, and it's worth narrowing down before ordering. If the inner coil heats normally but the outer ring never activates at any knob position, check the outer ring element itself first — a broken element coil is a common and cheaper fix than a switch. If the outer ring element tests fine but the switch's six-terminal wiring specific to the outer coil circuit has failed or corroded, the infinite switch is the correct replacement.
Can I use a standard single-element infinite switch instead if this one is out of stock?
No. A standard single-element switch has fewer terminals and cannot correctly control the two separate coil zones of a dual (bridge) burner. Wiring a single-element switch into a dual-element circuit will leave one coil zone permanently uncontrolled or non-functional. Always order the six-terminal dual-element switch specified for your model.
What does "infinite switch" mean?
An infinite switch lets you dial in a continuous range of heat rather than a few fixed positions, by rapidly cycling the element's power on and off at a ratio set by the knob — low settings get short power pulses, high settings get long ones. When the internal contacts wear or weld together from years of cycling, the switch can get stuck feeding constant power (burner always hot) or stop switching at all (burner always off), regardless of where the knob is turned.
A spill got into the control panel and now the burner won't turn off. Is that the switch?
Very likely, yes. Liquid boilovers and spills are one of the most common causes of infinite switch failure — moisture gets into the switch body, corrodes or bridges the internal contacts, and the switch can end up stuck feeding power continuously even with the knob turned to off. If you suspect this, shut off power to the range immediately at the breaker rather than relying on the knob, since a shorted switch may not respond to it at all.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original six-terminal wiring, figure-8 shaft, 240VAC/15A electrical rating, and dual-coil switching behavior of the infinite switch originally installed for the dual (bridge) element in your GE, Hotpoint, or Kenmore range.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DC64-00519D Washer Genuine OEM Door Lock
Replaces Part Numbers: DC64-00519D, 4545806, AP6027082, PS11762120.
Description: This Washer Door Lock Switch is an essential component for maintaining the security and functionality of your Samsung washer. Designed to ensure that the washer door remains securely locked during operation, this genuine OEM part guarantees reliable performance and durability. By replacing a faulty or damaged door lock switch with this high-quality assembly, you can restore your washer's ability to operate safely and efficiently.
WPW10435242 Washer Genuine OEM Water Valve
Description: The Water inlet valve assembly is an OEM part for specific Whirlpool washing machine models. This valve assembly controls the flow of water entering the washing machine. It regulates water levels during different wash cycles like filling, rinsing, and draining.
Replaces Part Numbers: WPW10435242, W10435242, W10435236, AP6021375, PS11754698.
California Residents only
WARNING: California’s Proposition 65
