Search results for "Dryer Thermal Fuse"

XPARTCO 3977767 Dryer Hi Limit Thermostat 250 -80F Limit Thermostat. Fits specific Maytag, Kenmore, Whirlpool dryer models. Replaces Part Number: WP3977767, 3977767, 3399693, ER3977767, SET185, TJ90SET185, WP3977767VP, AP6009043, PS11742185. Description: This Hi-Limit Thermostat is a replacement part for specific Maytag, Kenmore, Whirlpool dryer models. It functions as a critical safety device that monitors and controls the temperature within the dryer, preventing it from overheating. When the dryer reaches a temperature that is too high, this thermostat will cut off the power to the heating element to mitigate the risk of fire.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

Genuine Whirlpool WP3387134 Dryer Cycling Thermostat - Compatible with Whirlpool, Kenmore, Maytag, KitchenAid Product Description Maintain optimal drying temperatures with the Genuine Whirlpool WP3387134 Dryer Cycling Thermostat. This OEM cycling thermostat is designed for select Whirlpool, Kenmore, Maytag, KitchenAid, and other dryers, regulating the heating element by cycling on at 155°F (68°C). It addresses issues like no heat, insufficient heat, overheating, or prolonged drying times, delivering reliable performance as an authentic Whirlpool part. Note: Includes one cycling thermostat. Disconnect power before installation. Check dryer venting and related components for optimal performance. Replaces part numbers: WP3387134, 3387134, 2011, 2893, 3-6910, 306910, 3387135, 3387139, ET187, PD00002313, EAP11741405, WP3387134VP, AP6008270, PS11741405, L155-25F.  Compatibility: Compatible with models including but not limited to: Whirlpool: WED5500XW0, WED5600XW0, WED9400SW0, WGD5500XW0, WED5800BC0 Kenmore: 110.60022010, 110.68002010, 110.87872603 Maytag: MED6000XW0, MED7000XW0 KitchenAid: YKEHX01PMT0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, KitchenAid, and other dryers. 🔥 Specifications: OEM cycling thermostat, cycles on at 155°F (68°C). 💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves no heat, insufficient heat, overheating, or prolonged drying times. Product Specification Part Number: Genuine Whirlpool WP3387134 Component Type: Dryer cycling thermostat Material: Metal and plastic Electrical Specs: Cycles on at 155°F (68°C). Mounting: Screw-mounted near heater housing or exhaust duct Operating Conditions: Suitable for high-heat dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your dryer running efficiently today! Add to cart now for a reliable fix!

Read more less

WE4M137 Dryer Genuine OEM High Limit Thermostat Fits Specific GE Dryer Models.  Replaces Part Numbers: WE4M137, WE4M457, 276438, WE04M0137, WE04X25197, AH267900, EA267900, OEM6127700, AP2042565, PS267900. Description: This High Limit Thermostat is a Genuine OEM replacement part for specific GE electric dryer models. It serves as a crucial safety component, designed to prevent overheating by cutting off power to the dryer's heating elements when excessive temperatures are detected. Common causes of a bad High Limit Thermostat can include exposure to excessive heat over time, electrical issues, or physical damage to the thermostat itself.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 6931EL3001E Dryer Thermostat – Compatible with LG and Kenmore Dryers Product Description Maintain proper dryer safety and temperature control with the 6931EL3001E Dryer Thermostat. This replacement part monitors and regulates dryer temperature to prevent overheating and ensure efficient drying cycles. A faulty thermostat may cause your dryer to stop heating, overheat, or shut off unexpectedly. Replacing it restores reliable performance and helps extend the life of your dryer. Replaces Part Numbers 6931EL3001E, 1268363, 6931EL3001B, 6931EL3001C, AH3530481, EA3530481, PD00023869, EAP3530481, AP4440977, PS3530481, L125-31C, 503475. Compatibility This dryer thermostat is compatible with select LG and Kenmore dryer models. Example compatible models include (but are not limited to): LG DLE2516W, DLE7177WM, and Kenmore 796.80272900. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Fits select LG and Kenmore dryers 🔒 Reliable Safety – Prevents overheating by regulating dryer temperature 💰 Cost-Effective Replacement – OEM-equivalent performance at a lower price 🛠️ DIY-Friendly – Quick installation with basic tools 🛡️ Fixes Common Issues – Restores heating, prevents overheating, and fixes dryer shutdown problems 📐 Product Specification Part Number: XP6931EL3001E Component Type: Dryer Thermostat Material: High-heat resistant metal and thermal components Mounting: Direct replacement, mounts on heating element housing Operating Conditions: Designed for residential dryers Compliance: OEM-equivalent performance and safety standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers ⚠️ Safety First: Always disconnect power before starting repairs to avoid electrical shock. Steps: Unplug dryer and remove back access panel. Locate thermostat on heating element housing. Disconnect wire terminals from the old thermostat. Remove screws holding it in place and replace with the new thermostat. Reconnect wires, secure the component, and reinstall the access panel. Restore power and test dryer operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your dryer’s safe operation today — Add to Cart Now for fast, budget-friendly repair!

Read more less

WP3387749 Dryer Genuine OEM Heating Element – Compatible with Whirlpool, Kenmore, Maytag Dryers Product Description Restore your dryer’s heating performance with the WP3387749 Dryer Genuine OEM Heating Element. This factory-approved replacement part generates the heat needed to dry laundry efficiently. A failed heating element may cause your dryer to run but not heat, take longer to dry clothes, or shut down during cycles. Replacing it with this genuine OEM part ensures safe operation and long-lasting performance. Replaces Part Numbers WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418. Compatibility This heating element is compatible with select Whirlpool, Kenmore, Maytag dryers. Example compatible models include (but are not limited to): Whirlpool LER4634EQ2, Kenmore 110.96573220, and Maytag MEDC215EW1. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Wide Compatibility – Fits Whirlpool, Kenmore, Maytag dryers 🔥 Restores Heating – Generates reliable, consistent heat for drying 💰 Cost-Effective OEM Repair – Genuine part ensures durability and performance 🛠️ DIY Friendly – Installs with standard tools in under 30 minutes 🛡️ Fixes Common Issues – Solves no-heat problems, long drying times, or mid-cycle shutdowns 📐 Product Specification Part Number: WP3387749 Component Type: Dryer Heating Element Material: High-temperature resistant metal coil with mounting housing Mounting: Direct replacement heating element assembly Operating Conditions: Designed for residential dryers Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Nut driver, Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the dryer before beginning repairs to prevent electrical shock. Steps: Disconnect power and remove dryer rear access panel. Locate the heating element housing inside the dryer. Disconnect wire terminals and remove screws securing the old element. Slide out defective element and install the new WP3387749. Reconnect wires, secure housing, and reinstall rear panel. Restore power and test dryer heating. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Get your dryer heating again — Add to Cart Now for a safe, factory-approved repair! WP3387749 Dryer Genuine OEM Heating Element Cross Reference Information   Part Number WP3387749, 3387749, 525504, PD00003387, EAP344599, AP6008283, PS11741418.

Read more less

30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm Product Description Protect your appliances with the replacement 30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm. This high-quality, fast-acting ceramic cartridge fuse is designed to safeguard circuits in appliances like microwaves, dryers, and HVAC systems by interrupting power during over-current events. With a 30A current rating, 250VAC/125VDC voltage rating, and compact 3AB/3AG (6.35 x 32 mm) size, it offers reliable protection for high-power loads. Constructed with a durable ceramic body for high interrupting ratings, this fuse ensures safety and performance. Note: Includes one fast-blow ceramic fuse; disconnect power before installation. Check appliance manual for compatibility. Replaces part numbers: ABC-30, BK/ABC-30, 0ADEC9300-BE, 0314030.MX52LP, BK-AHC-30-R, BK-AHCF-V-30-R Compatibility: Compatible with appliances including but not limited to: Microwaves: Select GE, Samsung, LG models requiring 30A, 250V fast-blow fuses. Dryers: GE Hotpoint models (e.g., compatible with WE1X21975 assemblies). HVAC Systems: Units using 3AB/3AG 6.35 x 32 mm fast-acting fuses. Other Appliances: Power strips, audio amplifiers, and industrial equipment requiring 30A protection. Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Samsung, LG, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement ceramic fuse, 30A, 250VAC/125VDC, fast-blow, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, 10kA interrupting rating at 125VAC, 3.7 mOhms resistance, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower cost. 🛠️ Easy Installation: Requires fuse holder or clip; typically installed in 5–10 minutes with basic tools. 🛡️ Reliable Fixes: Protects circuits from over-current, preventing appliance damage or failure. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your appliances run safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

WP8182528 Dryer Genuine OEM Heating Element Replaces Part Numbers: WP8182528, 8182528, 1065644, AP6011812, PS11745011.  Description: Upgrade your dryer's heating element with the WP8182528 Genuine OEM Heating Element. This high-quality replacement part will ensure efficient and reliable heat distribution, giving your clothes that perfect dry every time. Trust in its durability and compatibility with your dryer model.

Read more less

(5 Pack) 20A Ceramic Fuse 6.35 x 32 mm, 20A 250V - Compatible with GE, Whirlpool, Kenmore, Maytag, Frigidaire, LG, Samsung and Other Appliances Product Description Protect your appliances with the replacement 20A Slow-Blow Ceramic Fuse 6.35 x 32 mm, 20A 250V. This high-quality time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances like microwaves, washers, dryers, and spa control systems. With a ceramic body for durability and heat resistance, this fuse (6.35 x 32 mm, 20A, 250V AC) safeguards circuits from over current and short circuits while tolerating brief surges. It addresses issues like appliance failure, power loss, or blown fuses.  Note: Includes one ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements. Replaces part numbers: EXP20A, MDA-20, 0326020.HXP, 0326020.MXDP, BK1-MDP-20-R, BK-MDP-V-20-R, GSA20, 8020.0605, 8020.0605.G, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WP4375321, W11305892, W11305905, AP6009296, PS11742452, 3601-001198, AP4046006, PS4131369, 5F1CD2031S, AP4565040, 1206681, 4922155, WB27X11151, AP4980434, PS3486702, WB27X11151, AP4980434, PS3486702, WB2X3910, PS242167, AP2010811, WB2X3910, WB27X995, WB27X945, B27X10388, PS239525, AP2631556, WP8183507, 8183507, PS11745084, AP6011884, M0805101, AP6014669, PS11747931, WPM0805101, 5304423383, PS472662, AP2151673, EA472662, WB27X10928, AP3994062, WB27X10388, AH1481237, EA1481237, PS1481237, W11707984, W10138793, AP7225218, PS17629444, 3B74133Q, AP4440371, PS3522743, 5F1CD0202S, 5F1CD2031S, 3B74133K. AH3522741, EA3522741, AP4438152, PS3522741. Compatibility: Compatible with appliances including but not limited to: GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04 Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0 Kenmore Microwaves: 721.62649200, 665.68612800 Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0 Whirlpool Dryers: WED5300SQ0 Balboa Spa Control Systems: 30123 Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 20A 250V slow-blow fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, LG, Samsung and other appliances requiring 6.35 x 32 mm, 20A 250V fuses. 🔥 Specifications: replacement slow-blow ceramic fuse, 6.35 x 32 mm (1/4" x 1-1/4"), 20A, 250V AC, ceramic body, time-delay, 3.35–3.5 mOhms resistance, cylindrical, holder/clip mount. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes. 🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and spa systems. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO WE04X10118 Dryer High Limit Thermostat Replaces Part Numbers: WE04X10118, 1089012, AH959918, EA959918, AP3794592, PS959918. Description: This High Limit Thermostat is a replacement part for specific GE dryer models. This safety component is designed to monitor and regulate the dryer's temperature, preventing it from exceeding safe levels. Mounted on the heating chamber or exhaust duct, the high limit thermostat shuts off the heat source or the dryer itself if it detects temperatures that are too high, helping to prevent overheating and potential fire hazards.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

XPARTCO EXP20AG - 5 Pack Glass Line Fuse, Fast Blow, 20A The XPARTCO (5 Pack) EXP20AG is an aftermarket replacement fast-blow glass line fuse rated 20A at 250V, used as the primary overcurrent protection component in microwaves and a range of other household appliances. A line fuse sits directly in the incoming power path: as long as current draw stays within its rating, it does nothing at all, but the instant a short circuit or an overcurrent condition pushes current past 20A, the thin wire element inside the fuse melts and opens the circuit — sacrificing itself to protect the more expensive components downstream, like a transformer, magnetron, or control board. A blown fuse is why an appliance can go from working normally to completely dead with no lights, no display, and no response to any button. This is a standard-dimension glass cartridge fuse measuring 6mm x 30mm, fast-blow (fast-acting) rated, so it opens quickly once its rating is exceeded rather than tolerating a brief surge the way a slow-blow fuse would. It is commonly used across GE, Frigidaire, Whirlpool, Kenmore, and other brands' microwaves, and also turns up in HVAC control boards and various small appliances that use this same standard fuse size and rating. A fuse itself does not wear out from age the way a mechanical part does — if one has blown, it is a symptom of an overcurrent event somewhere else in the appliance, and it's worth understanding why before simply swapping in a new one. Quick Answer The XPARTCO EXP20AG Glass Line Fuse fixes microwaves and other appliances that have gone completely dead — no lights, no display, no response to any button. Fast-blow, 20A, 250V, standard glass cartridge, 6mm x 30mm. Commonly used across GE, Frigidaire, Whirlpool, and Kenmore microwaves and other appliances requiring this fuse size and rating. If a new fuse blows again right away, don't just keep replacing it — that almost always means there's an underlying short circuit that needs to be diagnosed first. Common Problems This Part Fixes Microwave completely dead — no display, no lights, no response to any button Appliance suddenly stopped working with no warning Microwave won't start even though the outlet has power HVAC control board or other appliance electronics unresponsive Appliance tripped off after a power surge or brownout Visible blown or darkened fuse when inspected against a light Continuity test shows an open circuit across the old fuse Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This glass line fuse directly replaces the following OEM and cross-reference part numbers: EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, 5304464087 Because this is a standard fuse size and rating rather than a brand-specific component, the exact OEM part number your appliance's manual references will vary. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This fuse is compatible with select appliances from the following brands that use a standard 20A, 250V, fast-blow 6mm x 30mm glass cartridge fuse: GE and Hotpoint microwaves (select models) Frigidaire microwaves (select models) Whirlpool and Kenmore microwaves (select models) KitchenAid, Maytag, and Amana microwaves (select models) Select HVAC control boards and other electronics using this fuse size and rating Note — glass vs. ceramic body: This is the glass-body EXP20AG fuse. A visually similar ceramic-body fuse (commonly labeled EXP20A) is also widely sold at the same 20A/250V rating for many of the same appliances. Check which body material your appliance's original fuse used before ordering, and always match the amperage and voltage rating exactly — never substitute a higher-amperage fuse "to stop it from blowing," since that removes the very protection the fuse is designed to provide. Contact our support team with your model number if you're unsure which fuse your appliance needs. Key Features Aftermarket replacement fast-blow glass line fuse — primary overcurrent protection for the appliance's incoming power circuit Rated 20A at 250V, standard 6mm x 30mm glass cartridge dimensions Fast-blow (fast-acting) design opens quickly once the rated current is exceeded Resolves "completely dead," "no display," and "no response to any button" symptoms caused by a blown line fuse Fits standard fuse holders/clips used across a wide range of microwaves and other appliances Replaces EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, and 5304464087 Compatible with GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances requiring this fuse size and rating Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number EXP20AG-5PK OEM Part Number Varies by brand/model — see Replaces Part Numbers Part Type Glass Line Fuse (Overcurrent Protection) Condition Aftermarket Replacement Amperage 20A Voltage 250V Response Speed Fast-blow (fast-acting) Body Material Glass Fuse Size 6mm x 30mm Application Microwaves and select other household appliances / HVAC controls Quantity 1 fuse Compatible Brands GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, Amana Installation Notes ⚠️ Danger — Microwave High-Voltage Capacitor If you are replacing this fuse in a microwave, be aware that microwaves contain a high-voltage capacitor that can store a dangerous electrical charge even after the unit has been unplugged. Never open a microwave's cabinet without first discharging the capacitor using an insulated screwdriver shorted across its terminals, and never touch the capacitor or its terminals directly. If you are not fully comfortable with this step, have a qualified appliance technician perform the fuse replacement instead. ⚠️ Unplug The Appliance Before Starting — Match Amperage And Voltage Exactly Disconnect power at the outlet or shut off the circuit breaker before beginning. Locate the fuse holder — on most microwaves this is accessible after removing the outer cabinet, often near the incoming power cord or the control board. Remove the old fuse from its clip or holder and inspect it: a blown fast-blow fuse often shows a visibly darkened or broken filament, or a scorched glass body. Test with a multimeter set to continuity if the fuse looks intact but you suspect it's still bad — a good fuse shows continuity end to end, a blown one shows none. Install the new EXP20AG fuse in the same holder, making sure the amperage and voltage rating match your appliance's original fuse exactly. Reassemble the cabinet, restore power, and test the appliance. Tools needed: Phillips screwdriver, insulated screwdriver (for microwave capacitor discharge), multimeter (recommended), work gloves. Frequently Asked Questions I replaced the fuse and it blew again right away. What's going on? A fuse doesn't fail on its own from age — it blows because something downstream drew more current than it should have. If the new fuse blows again immediately, that's a strong sign of an underlying short circuit or a failing component such as the transformer, magnetron, or a shorted capacitor. Continuing to replace the fuse without finding that root cause will just keep blowing new fuses, and in a microwave specifically, that diagnosis involves working near a high-voltage capacitor that should only be handled by someone comfortable discharging it safely, or by a qualified technician. Can I use a higher-amperage fuse if this one keeps blowing? No — this is one of the most important things to avoid with any fuse. The fuse's rating is chosen specifically to protect the wiring and components in the circuit it sits in. Installing a higher-amperage fuse "so it stops blowing" removes that protection and can allow a fault to overheat wiring or damage expensive components (or start a fire) instead of safely interrupting the circuit. Always replace a fuse with the same amperage and voltage rating as the original. How do I know if the fuse is actually blown? Visually, a blown fast-blow fuse often shows a broken or darkened filament inside the glass body, or scorching on the glass itself. If it looks fine but you still suspect it, the reliable way to check is with a multimeter set to continuity (with the appliance unplugged and the fuse removed from the circuit) — a good fuse reads continuity end to end, while a blown fuse reads open with no continuity at all. Is EXP20AG the same as EXP20A? They share the same 20A/250V rating, but EXP20AG refers to the glass-body version of this fuse while EXP20A commonly refers to a ceramic-body version sold for many of the same appliances. Check which body material your appliance's original fuse used, and if you're not sure, contact our support team with your model number for confirmation. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine brand-specific OEM part, but is manufactured to the same standard 20A, 250V, fast-blow glass cartridge dimensions and rating used across the OEM fuses in compatible GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

279827 Genuine OEM Whirlpool Dryer Drive Motor The 279827 is a Genuine OEM Whirlpool replacement dryer drive motor with pre-attached pulley, compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Estate, and Kenmore dryers. The drive motor is the component that powers everything that moves in your dryer — it turns the drum belt (which rotates the drum to tumble clothes) and simultaneously drives the blower wheel (which pushes heated air through the drum and out the exhaust vent). When the motor fails, the dryer either won't start, won't tumble, stops mid-cycle, or makes loud humming, buzzing, or grinding noises. This is a dual-shaft motor: the drive shaft (1-3/4" long) connects to the drum belt via the pre-attached pulley, and the blower shaft (1-3/4" long) drives the blower wheel. The pulley is pre-attached and is not available separately — if your old motor's pulley is worn, this replacement includes a new one. As a Genuine OEM part manufactured by Whirlpool to factory specifications, the 279827 is one of the most widely used dryer motors across the Whirlpool platform, replacing over 70 legacy part numbers spanning decades of production. Key cross-references include W10448892, W10396029, W10194250, 8066206, 3395654, 3398046, 3391888, 3395652, AP3094245, PS334304, and EAP334304. Includes the motor assembly, two 1/8" insulated female terminals, and instructions. Before replacing the motor, check the thermal fuse (electric dryers) and door switch first — a blown fuse or failed switch produces identical no-start symptoms and is a far cheaper fix. Installs in 45–90 minutes with basic hand tools. Quick Answer The 279827 Genuine OEM Whirlpool Dryer Drive Motor fixes Whirlpool, Maytag, KitchenAid, Amana, Roper, Estate, and Kenmore dryers that won't start, won't tumble, stop mid-cycle, or make loud humming/buzzing/grinding noises. Dual-shaft drive motor with pre-attached pulley. Shaft lengths: blower 1-3/4", drive 1-3/4". Includes motor assembly + 2 insulated female terminals + instructions. Genuine OEM. Key cross-refs: W10448892, W10396029, W10194250, 8066206, 3395654, AP3094245, PS334304. Before replacing the motor: check the thermal fuse and door switch first — they're far cheaper fixes for no-start symptoms. Common Problems This Part Fixes Dryer won't start — motor has failed or seized Dryer won't tumble — motor not powering the drum belt Dryer stops mid-cycle — motor overheating or intermittently failing Loud humming or buzzing when the start button is pressed — motor trying to start but can't Grinding or squealing noise during operation — worn motor bearings Motor runs but drum doesn't turn — pulley worn or belt slipping on a worn motor shaft Dryer runs intermittently — motor cutting out from thermal overload Burning smell from the motor area — overheating windings or seized bearings Motor locked up or seized — bearings failed completely Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer drive motor directly replaces a large number of OEM and cross-reference part numbers spanning decades of Whirlpool-platform dryer production. Key replacements include: 279827, 3388235, 2019, 2584, 26000299992, 26000695925, 337099, 337100, 3388209, 3388234, 339088, 3391886, 3391887, 3392857, 339627, 339635, 339662, 339672, 340907, 343029, 345437, 348804, 349587, 349808, 3980069, 660199, 660617, 661654, 687499, 687988, 690094, 690870, 694051, 695089, 695925, 697075, 786067, 786090, 8066206, 8066207, 8115, 8528319, 8538262, 8539555, S87-531, W10194250, W10366770, W10396029, W10396032, W10448892, AH334304, AM211, EA334304, K35-099, OEM9282744, AP3094245, AWP39205, EAP334304, PD00002349, PS334304. This is one of the most extensively cross-referenced parts in the Whirlpool catalog. If your old motor shows a part number not listed here, contact our support team with your dryer model number and we will verify compatibility. Compatibility This drive motor is compatible with select dryers from the following brands: Whirlpool dryers — electric and gas models across many generations (WED, WGD, LER, LGR, LEQ, LGQ series and many more) Maytag dryers — select Whirlpool-built models (MED, MGD, MEDC, MEDX series) KitchenAid dryers (select models) Jenn-Air dryers (select models) Amana dryers — select models (NED, NGD series) Magic Chef dryers (select models) Admiral dryers (select models) Norge dryers (select models) Roper dryers (select models) Estate dryers (select models) Kenmore / Sears dryers — select Whirlpool-built models (110-series) Important — Before Replacing the Motor: A dryer that won't start can be caused by several components that are far cheaper and easier to replace than the motor. Before ordering, check the thermal fuse (electric dryers — test for continuity with a multimeter), the door switch (test for continuity when pressed), and the start switch. All three produce identical no-start symptoms. Only replace the motor after ruling out these common causes — a motor replacement is a significant repair, and it's far cheaper to replace a $10 thermal fuse than a $150+ motor. Always verify your dryer model number before ordering. Key Features Genuine OEM part manufactured by Whirlpool to factory specifications — guaranteed fit and performance Dryer drive motor — powers the drum (via belt and pulley) and the blower wheel simultaneously Dual-shaft design: drive shaft 1-3/4" and blower shaft 1-3/4" Pre-attached pulley (pulley is not available separately — included with the motor) Resolves "won't start," "won't tumble," "stops mid-cycle," "humming/buzzing," "grinding," and "burning smell" symptoms when caused by motor failure Includes motor assembly, two 1/8" insulated female terminals, and instructions One of the most widely used dryer motors across the Whirlpool platform — replaces 60+ legacy part numbers Key cross-references: W10448892, W10396029, W10194250, 8066206, 3395654, 3398046, 3391888, AP3094245, PS334304, EAP334304 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Estate, and Kenmore dryers Designed for heavy daily use with minimal noise DIY repair — installs in 45–90 minutes with basic hand tools Product Specifications Part Number 279827 Part Type Dryer Drive Motor with Pulley Condition Genuine OEM Application Dryers — Electric & Gas (Whirlpool platform) Drive Shaft Length 1-3/4" Blower Shaft Length 1-3/4" Pulley Pre-attached (not sold separately) Function Powers drum rotation (via belt/pulley) and blower wheel Kit Includes Motor assembly, 2x 1/8" insulated female terminals, instructions Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Estate, Kenmore Installation Notes ⚠️ Disconnect Power Before Starting — 240V Circuit (Electric) or Gas Line (Gas) — Wear Work Gloves Disconnect power at the breaker before beginning — electric dryers operate on a 240V circuit and there is a serious risk of electrical shock. For gas dryers, also shut off the gas supply at the shutoff valve. Wear work gloves and safety glasses. Pull the dryer away from the wall. Remove the lint screen and the screws beneath it. For most Whirlpool-platform dryers, remove the top panel by releasing the spring clips at the front, then detach the front panel by removing the screws at the top corners. Disconnect the door switch wires and set the front panel aside. Support the drum and slide it forward to access the motor at the bottom rear. Remove the drum belt from the motor pulley and idler pulley. Photograph the motor's wiring connections before disconnecting. Disconnect the electrical connections from the motor. Remove the blower wheel from the old motor's blower shaft — this typically requires a clamp or clip removal (the blower wheel threads off counterclockwise on many models). Remove the motor mounting clip/bracket and lift out the old motor. Install the new 279827 motor in the same position. Transfer the blower wheel onto the new motor's blower shaft and secure it. Reinstall the motor mounting clip/bracket. Reconnect the electrical connections using the included insulated female terminals if needed (match your photos). Re-route the drum belt around the drum, through the idler pulley, and onto the motor pulley. Reassemble the front panel, top panel, and lint screen. Restore power (and gas for gas dryers) and run a test cycle — confirm the drum spins smoothly and heated air flows through the drum. Tools needed: Phillips screwdriver, nut driver, socket/ratchet set, putty knife (for spring clips), needle-nose pliers, work gloves, safety glasses. Frequently Asked Questions My dryer won't start — is the motor definitely the problem? Not necessarily — and this is important because a motor replacement is a significant repair. A dryer that won't start can be caused by several components that are far cheaper and easier to replace. Before ordering the motor, check these first: 1) Thermal fuse (electric dryers) — a blown thermal fuse is the single most common cause of a no-start condition. Test for continuity with a multimeter; if it reads open, replace the fuse (~$10). 2) Door switch — test for continuity when pressed; if it's failed, the dryer won't start as a safety measure. 3) Start switch — if pressing the start button produces no response at all, the start switch itself may have failed. Only replace the motor after ruling these out. Signs that point specifically to the motor: a loud humming or buzzing when you press start (motor trying but can't turn), grinding or squealing from the motor area, or a motor that runs intermittently and cuts out. Why does the motor hum but the drum doesn't turn? A humming motor that won't turn is a classic sign of a seized or failing motor — the windings are energized (hence the hum) but the shaft can't rotate because the bearings have failed or the motor is mechanically stuck. This can also be caused by the blower wheel being jammed with lint or debris, preventing the shaft from turning — so before condemning the motor, check the blower wheel for obstructions. If the blower wheel spins freely and the motor still hums without turning, the motor has failed and needs replacement. Note: a humming motor that won't start will eventually trip the thermal fuse as a safety measure, so you may need to replace both the motor and the thermal fuse. Why are there so many cross-reference part numbers for this motor? The 279827 is one of the most extensively cross-referenced parts in the Whirlpool catalog because it's been the standard dryer drive motor across the Whirlpool platform for decades — spanning Whirlpool, Maytag, KitchenAid, Amana, Roper, Estate, Kenmore, and many other brands that Whirlpool manufactures for. Over the years, the motor has been assigned different part numbers by different brands, distributors, and catalog systems (W10448892, W10396029, 8066206, 3395654, 3398046, etc.), but they all point to the same motor. If your old motor shows ANY of those numbers, the 279827 is the correct replacement. Does this motor come with the pulley? Yes — the pulley is pre-attached to the motor and is not available separately. The pulley is what the drum belt rides on, transferring the motor's rotation to the drum. If your old motor's pulley was worn or grooved (a common cause of belt slipping and squealing), the new 279827 includes a fresh pulley. You will need to transfer the blower wheel from your old motor to the new one — the blower wheel is not included. Should I replace the belt and idler pulley while changing the motor? It's strongly recommended. When you replace the motor, the dryer is already apart and both the drum belt and idler pulley are right there in your hands. All three components wear from the same friction and heat cycles, and installing a new motor with a worn belt or a seized idler pulley puts unnecessary stress on the new motor from day one. Many technicians replace the belt, idler pulley, and drum support rollers as standard maintenance whenever the dryer is opened for a motor replacement — the combined cost of these parts is modest compared to the labor of disassembling the dryer again later. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Whirlpool to factory specifications. It is the exact same drive motor with pulley installed in compatible Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Estate, and Kenmore dryers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F) – Normally Closed – Universal Microwave Safety Cutoff Product Description Protect your microwave from overheating with the XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F), Normally Closed. This high-quality aftermarket safety device remains closed (conductive) during normal operation and opens permanently when internal temperatures exceed 120℃, cutting power to prevent component damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe operation and proper protection. Replaces Part Numbers XPMTC-120, MTC-120, KSD-120LC, Microwave Thermal Fuse 120C NC, 248F Normally Closed Thermal Cutoff, WB27X1127, 254709, AH239811, EA239811, WB21X0535, WB21X535, PD00023089, EAP239811, AP2026352, PS239811, WB21X10162, 1556022, AH2370041, EA2370041, KSD 120LC, PD00037108, EAP2370041, AP4484224, PS2370041, 5304509474, 5304464093, 4583662, PD00042646, EAP12071309, AP6230621, PS12071309, WB27X11212, 3026293, SE-7350-006, WB24X28948, WB27X10854, PD00044723, EAP8754627, AP5791056, PS8754627, DE47-20059B, 2079767, DE47-20059A, PD00005107, EAP4226453, AP4580112, PS4226453, DE47-20060A, 2079768, PD00036362, EAP4226454, AP4220155, PS4226454, WB27X10567, 946799, AH239709, PD00050529, EA239709, AP3192016, PS239709. Compatibility This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 120℃ (248°F) NC thermal cutoff. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure. 🔍 What’s the Difference Between NC and NO Thermal Cut-Offs? Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC. Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs). ⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating. ✅ Key Features 🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications 🌡️ 120℃ (248°F) Rating – Trips at unsafe temperature levels 🔁 Normally Closed (NC) – Conducts power during normal operation 🛡️ Critical Safety Component – Helps prevent overheating and fire hazards 💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs 📐 Product Specification Part Number: XPMTC-120 Component Type: Microwave Thermal Cut-Off Fuse Temperature Rating: 120℃ (248°F) Contact Type: Normally Closed (NC) Function: One-time safety cutoff Material: Heat-resistant metal body Application: Magnetron or microwave cavity temperature protection Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts. Basic Steps: Disconnect microwave power. Remove the outer cabinet or access panel. Locate the thermal cut-off near the magnetron or cavity. Disconnect wiring and remove the failed fuse. Install the new XPMTC-120 (NC) thermal cut-off in the same position. Reassemble the microwave and restore power. Test operation. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!

Read more less