XPARTCO 8580309 Dishwasher Door Latch Strike Replaces WP8580309
The XPARTCO 8580309 is an aftermarket replacement door latch strike for Whirlpool-built dishwashers. This small metal component attaches at the top of the dishwasher tub and locks the door latch securely in place whenever the door is closed. It does double duty: mechanically, it's what keeps the door held shut and properly tensioned against the tub opening to maintain a watertight seal during the wash cycle, and it also acts as the actuator that trips the door switch, telling the control that the door is closed and it's safe to run.
Made from durable metal, measuring approximately 2" in length. Over years of opening and closing the door, the strike can wear down, bend from an accidental impact, or simply weaken to the point where it no longer holds the latch with enough tension. Debris buildup around the strike can also interfere with proper latching. A failing strike produces a clear set of symptoms: the dishwasher won't start because the door switch never registers as closed, the door feels loose or doesn't seal tightly when shut, or water leaks out around the door during a cycle. It directly replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800.
Quick Answer
The XPARTCO 8580309 Dishwasher Door Latch Strike fixes Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers that won't start because the door won't latch, feel loose when closed, or leak water around the door during a cycle. Metal construction, approximately 2" long. Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, PS11746800. Package includes small parts — keep away from young children during installation.
Common Problems This Part Fixes
Dishwasher won't start because the door won't latch or the door switch never registers as closed
Door feels loose, doesn't seal tightly, or doesn't hold shut properly
Water leaking out around the door during a wash cycle
Door latch failing to catch even though the door appears closed
Visible wear, bending, or damage on the strike itself
Increased door-closing noise since the strike no longer cushions the latch properly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher door latch strike directly replaces the following OEM and cross-reference part numbers:
8580309, WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, EAP1156352 PS1156352, AWP48708, PD00004771.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door latch strike is compatible with select Whirlpool-built dishwashers across the Whirlpool family of brands, including:
Whirlpool dishwashers — DP1040X, DU1055XTSS2, DU1145XTPBA
Whirlpool GU series — GU1500XTKB0, GU1200XTKS0, GU1200XTLB3, GU2400XTPS3, GU1200XTKB0, GU1100XTLB1, GU1500XTLQ1
KitchenAid — KUDC02IRBL1, KUDI01DLBL2, KUDI01DLWH2, KUDL02IRBS3, KUDK01ILBS0, KUDK01ILBS1, KUDK01ILBS5, KUDK03ITBS1
Kenmore / Sears — 665.16512201, 665.16532200, 665.17533202, 665.17512200
Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, and Crosley dishwashers (select models)
Note: Always verify your full model number before ordering, since Whirlpool uses several different door latch strikes across its dishwasher lineup, including the separate W10544004 / WPW10544004 strike used on other models. Contact our support team with your model number if you're unsure which strike fits your dishwasher.
Key Features
Aftermarket replacement door latch strike — attaches to the top of the tub and locks the door latch in place when closed
Works as a mechanical actuator for the door switch, confirming to the control that the door is closed
Provides the door tension needed for a proper watertight seal
Resolves "won't start," "door won't latch," "loose door," and "leaking around the door" symptoms caused by strike wear or damage
Durable metal construction, approximately 2" in length
Direct drop-in replacement — mounts to the original tub location
Replaces WP8580309, AP6013574, 8269111, 1181203, AH1156352, EA1156352, PS1156352, and PS11746800
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, and related dishwashers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
8580309
OEM Part Number
WP8580309
Part Type
Dishwasher Door Latch Strike
Condition
Aftermarket Replacement
Material
Metal
Length
Approx. 2 in.
Weight
Approx. 0.03 lbs.
Location
Top of the dishwasher tub
Function
Locks the door latch and actuates the door switch
Repair Difficulty
Easy — basic hand tools, minor disassembly
Quantity
1 door latch strike
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Jenn-Air, Magic Chef, Admiral, Norge, Roper, Estate, Inglis, Crosley
Installation Notes
⚠️ Unplug Dishwasher Or Shut Off Breaker Before Starting Unplug the dishwasher or shut off the house circuit breaker before beginning. Wear work gloves. Open the dishwasher door and locate the door latch strike mounted at the top of the tub opening, above where the door latch engages when closed. Using a flat-blade screwdriver, remove the screws securing the old strike in place, then lift it free. Position the new 8580309 strike in the same location, aligning it so the door latch will catch and engage correctly when the door is closed, and secure it with the mounting screws. Close the door and confirm the latch catches firmly and holds the door snugly against the tub with no give. Restore power and run a test cycle, checking around the door for any signs of leaking. Tools needed: flat-blade screwdriver, work gloves.
Frequently Asked Questions
My dishwasher won't start even though I closed the door. Is this the strike?
It's a strong possibility. This strike acts as the mechanical actuator for the door switch — when the door closes, the strike is what physically trips the switch to signal the control that it's safe to run. If the strike has worn down, bent, or weakened, the door may appear closed without properly triggering that switch, leaving the dishwasher unable to start even though nothing looks obviously wrong.
Water is leaking around my door during the cycle. Could that be this part?
Yes, this is a common cause. The strike provides the tension that pulls the door snugly against the tub opening to maintain a watertight seal. If it's worn or damaged, the door may close but without enough holding tension to keep the seal tight, letting water seep out around the edges during the wash.
Is this the same strike used on all Whirlpool dishwashers?
No. Whirlpool uses more than one door latch strike design across its dishwasher lineup — for example, the W10544004 / WPW10544004 strike is a separate part used on other models such as the WDF520PADM, WDT730PAHZ, and WDT720PADM. Always check your full model number before ordering to make sure you're getting the correct strike for your specific dishwasher.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, mounting configuration, and door-tensioning function of the original WP8580309 latch strike used in compatible Whirlpool, Kenmore, KitchenAid, and related dishwashers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 165256 Dishwasher Float Switch Replaces 00165256
Product Overview
The XPARTCO 165256 Dishwasher Float Switch Replaces 00165256 is designed to monitor water levels inside the dishwasher and prevent overfilling. This float switch detects rising water levels and signals the control system to stop filling, protecting your appliance from leaks and water damage.
Quick Answer
If your dishwasher is overfilling, not filling correctly, or leaking due to excess water, the 165256 float switch may be faulty. Replacing it restores proper water level control and prevents overflow issues.
Replaces Part Numbers
Replaces OEM part number: 00165256, 165256, 935359, EAP8697040, ABS10088, PD00035415, AH3439096, EA3439096, PS3439096, AP2802373, PS8697040.
Compatibility
This dishwasher float switch is compatible with select Bosch, Thermador, and other compatible dishwashers.
Bosch Dishwashers
Thermador Dishwashers
Compatible European-style Dishwashers
Always verify your appliance model number before ordering.
Common Problems This Part Fixes
Dishwasher overfilling
Water leaking due to excess fill
Incorrect water level detection
Dishwasher not filling properly
Key Features
Monitors dishwasher water level
Prevents overfilling and leaks
High-quality aftermarket replacement
Reliable and durable construction
Product Specifications
Part Number: 165256
Part Type: Dishwasher Float Switch
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dishwasher Water Level Control
Troubleshooting Guide
Dishwasher overfills → Faulty float switch
Water keeps filling → Float switch stuck or failed
Dishwasher won’t fill → Switch not detecting properly
When Should You Replace This Float Switch?
Replace this float switch if your dishwasher is overfilling, leaking, or not detecting correct water levels.
Installation Notes
⚠️ Disconnect power and water supply before installation. Access the float switch inside the tub area and install securely according to your dishwasher model.
Related Parts
Water Inlet Valve
Dishwasher Float Assembly
Control Board
Frequently Asked Questions
Will this float switch fit my dishwasher?This part fits many Bosch and compatible dishwashers. Always verify your model number.
What does a float switch do?It monitors water levels and prevents overfilling inside the dishwasher.
What are signs of a bad float switch?Overfilling, leaking, or improper water level control.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement part.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket
The WD08X23477 is a genuine GE OEM tub seal gasket designed specifically for GE dishwashers with a stainless steel tub. This gasket runs around the tub opening and creates the seal that keeps wash water contained inside the tub during the cycle rather than leaking out around the edges where the tub meets the door and surrounding cabinet structure.
Over time, this seal can flatten, harden, or develop gaps from years of heat and moisture exposure, which lets water escape past the seal instead of staying inside the tub. A worn or damaged gasket typically shows up as water leaking from underneath or around the front of the dishwasher during a cycle, dampness or pooling near the base of the unit, or visible flattening, cracking, or separation in the seal material itself. It directly replaces AP6041570 and PS11774413.
Quick Answer
The WD08X23477 Genuine OEM GE Dishwasher Tub Seal Gasket fixes GE dishwashers with a stainless steel tub that are leaking water from around the tub opening during a cycle. Replaces AP6041570, PS11774413. This gasket is specific to stainless steel tub models — it is not the plastic tub/door gasket used on other GE dishwasher designs, such as WD08X21894 or WD08X23476.
Common Problems This Part Fixes
Water leaking from underneath or around the front of the dishwasher during a cycle
Dampness or pooling near the base of the dishwasher after running
Visible flattening, hardening, or cracking of the seal around the tub opening
Gaps or separation in the gasket where it meets the tub frame
Leak that appears intermittently, worse on longer or hotter cycles
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dishwasher tub seal gasket directly replaces the following OEM and cross-reference part numbers:
WD08X23477, WD08X22095, WD08X20675, 4466531, WD08X20591, AGE24098, AP6041570, EAP11774413, PD00052582, PS11774413
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This tub seal gasket is compatible with select GE dishwashers equipped with a stainless steel tub, and also fits select Hotpoint, Haier, Monogram, and Café dishwashers built on the same GE platform.
Note — stainless steel tub only, and verify fit carefully: This gasket is designed specifically for GE's stainless steel tub design and is a different part from the gaskets used on plastic tub GE dishwashers (such as WD08X21894 or WD08X23476). Additionally, this seal has a documented fitment sensitivity — at least one customer has reported that on their unit, the older original seal had roughly 2 extra inches of material at the bottom that this replacement did not match, resulting in a persistent minor leak even after installation. Confirm your dishwasher has a stainless steel tub and verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified for stainless steel tub dishwashers
Seals the tub opening to keep wash water contained during the cycle
Resolves "water leaking from the front or underneath," "dampness near the base," and "flattened or cracked seal" symptoms
Durable material designed to withstand repeated high-humidity, high-temperature cycles
Direct drop-in replacement — fits the original tub opening groove
Replaces AP6041570 and PS11774413
Compatible with GE, Hotpoint, Haier, Monogram, and Café stainless steel tub dishwashers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WD08X23477
Part Type
Dishwasher Tub Seal Gasket
Condition
Genuine OEM
Brand
GE
Application
Stainless Steel Tub Dishwashers
Function
Seals the tub opening to prevent water leaks during wash cycles
Quantity
1 tub seal gasket
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dishwasher And Shut Off Water Before Starting — Verify Seal Length Against Your Original Disconnect power at the outlet or shut off the circuit breaker, and shut off the water supply before beginning. Wear work gloves. Access to the tub opening seal is typically from the front of the unit with the door open, though some models may require removing the door or surrounding trim to fully access the gasket channel. Before removing the old seal, take note of its full length and how it seats into the groove around the tub opening — some customers have found the replacement seal shorter than the original at one section, so compare the two side by side before discarding the old one. Carefully pull the old gasket free from its retaining groove, working around the full perimeter. Press the new WD08X23477 gasket into the same groove, working around the full perimeter and ensuring it seats evenly with no twists, gaps, or areas where it's pulled too tight. Run your fingers along the full seal after installation to confirm even, consistent contact with no visible gaps. Restore water and power, then run a test cycle and check underneath and around the front of the unit for any signs of leaking. Tools needed: flat-blade screwdriver (model-dependent access), work gloves.
Frequently Asked Questions
How do I know if my dishwasher has a stainless steel tub or a plastic tub?
Open the dishwasher door and look at the interior tub walls — a stainless steel tub has a visible metallic finish, while a plastic tub is typically a solid plastic color (often white, gray, or black) with no metallic sheen. This gasket is designed specifically for the stainless steel tub design; plastic tub models use a different gasket. If you're not sure, check your model number against your appliance's documentation or contact our support team.
I installed the new seal but I'm still seeing a small leak. What should I check?
This has been reported by at least one customer, who found their original seal had extra material at the bottom that this replacement didn't fully match, resulting in a persistent minor leak. Before assuming the gasket itself is faulty, run your fingers around the entire seal after installation to check for any spot where it isn't making even, firm contact — pay particular attention to the bottom section. If a specific area isn't sealing, it may need to be pressed more firmly into its groove, or in rare cases, your particular tub design may require a different seal than expected. Contact our support team with your model number if the leak persists after a careful reinstall.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original material, profile, and groove fit of the tub seal gasket originally installed in your stainless steel tub dishwasher.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
8270020CM Dishwasher Door Spring
Door balance spring - 7.75" overall length.
Fits Whirlpool dishwashers.
Replaces Part Numbers:WP8270020, 8270020, AP6012319, PS11745526.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
