5835EL1002A Dryer Genuine OEM Blower Wheel – Compatible with LG and Kenmore Dryers
Product Description
Improve airflow and restore efficient drying performance with the 5835EL1002A Dryer Genuine OEM Blower Wheel. This Blower Wheel is a Genuine OEM part for specific Kenmore, LG dryer models. This part circulates air through the dryer drum and out the exhaust vent, ensuring proper airflow for efficient drying of clothes.
Replaces Part Numbers
5835EL1002A, 1268176, 5835EL1001A, 5835EL1001B, PD00001766, EAP3528491, AH3528491, EA3528491, AP4438881, PS3528491, DE1002A.
Compatibility
This Genuine OEM blower wheel fits select LG and Kenmore (LG-built) dryers.
Example compatible models include (but are not limited to):LG DLE2516W, DLE1310W, DLE5955W, DLE5977W,Kenmore 796.80272900, 796.80311900, 796.80448900.
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🧩 Genuine OEM Replacement – Factory-certified for perfect fit and long-lasting durability
🌬️ Restores Proper Airflow – Ensures strong, consistent air movement through the dryer
🔇 Quiet Operation – Balanced impeller reduces vibration and noise
💪 Durable Construction – Molded from high-strength OEM polymer
🛡️ Fixes Common Issues – Solves long dry times, overheating, noisy operation, or poor airflow
📐 Product Specification
Part Number: 5835EL1002A
Component Type: Dryer Blower Wheel / Fan Wheel
Material: OEM-grade reinforced plastic
Mounting: Press-fit onto motor shaft
Diameter: Approx. 8 inches (varies slightly by model)
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock.
Steps:
Disconnect dryer power and remove the front panel or blower housing cover.
Access the blower assembly and inspect the existing wheel.
Remove the old blower wheel from the motor shaft.
Press the new 5835EL1002A blower wheel firmly onto the shaft.
Reassemble all removed panels and restore power.
Run a test cycle to confirm smooth airflow and reduced noise.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Genuine OEM Replacement Part
🔄 30-Day Return Policy
Improve your dryer’s airflow and performance — Add to Cart Now for a dependable, factory-quality repair!
XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set - Compatible with Whirlpool, Kenmore, Maytag
Product Description
Maintain safe and efficient dryer operation with the XPARTCO 3387134 - 3392519 Dryer Cycling Thermostat and Thermal Fuse Set. This replacement kit includes one cycling thermostat (3387134, L155-25) and one thermal fuse (3392519), designed as a replacement for select Whirlpool, Kenmore, Maytag, and other compatible dryers. The cycling thermostat regulates drum temperature, while the thermal fuse prevents overheating by cutting power if temperatures exceed safe limits. This set addresses issues like overheating, insufficient heat, no heat, or prolonged drying times. Test the thermal fuse first if the dryer won't heat, as it typically fails before the thermostat.
Note: Includes (1) cycling thermostat and (1) thermal fuse. Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers:
Cycling Thermostat: WP3387134, 3387134, 3387135, 3387139, 3-6910, 306910, 326801, 661512, L150-15F, L155-25F, AP6008270, PS11741405.
Thermal Fuse: 3392519, WP3392519, 3388651, WE4X857, G4AP0500, 6L4101091C, ET401, 3388651, 694511, 80005, PS11741460, AP6008325.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: LE5700XKW0, LE5920XKW0, WED4815EW1, WED4910XQ1, WED5300SQ0
Kenmore: 110.97591420, 110.97591220, 110.97592420, 110.60072990
Maytag: MDE5500AYW, MDE6000AYW, MDE7600AYW
Roper: RED4440VQ1, REX5634KQ1
Amana: NED4655EW0
KitchenAid: KEYE760WWH0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Roper, Amana, KitchenAid, and other dryers.
🔧 Specifications: Replacement kit with one cycling thermostat (L155-25 SPST, 120V, 2W) and one thermal fuse (250°F limit, non-resettable).
💪 Reliable Performance: Regulates drum temperature and prevents overheating for safe, efficient drying.
🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves overheating, insufficient heat, no heat, or prolonged drying times.
Product Specification
Part Number: XPARTCO 3387134 - 3392519
Component Type: Dryer cycling thermostat and thermal fuse kit
Material: Plastic and metal
Electrical Specs:
Cycling Thermostat: 120V, 2W; L155-25 SPST, opens at 155°F, closes at 130°F
Thermal Fuse: 250°F limit, 125/250V, non-resettable
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running safely and efficiently today!
Add to cart now for a reliable fix!
5301EL1001J Dryer Genuine Heating Element
Fits Specific LG Dryer Models.
240V, 5400W complete assembly with housing and thermostats
Replaces Part Numbers: 5301EL1001J, 5301EL1001A, 1377645, AEG72910307, AH3527791, AP4439759, EA3527791, PS3527791, 5301EL1001H, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001S, 5301EL1001U, 5301EL1001W, AH3527790, AP5072170, EA3527790, PS3527790, AEG72910301, AP5669354, AEG72910309, AP7211081.
Description: This Heater Assembly is a Genuine OEM part for specific LG dryer models. This component is responsible for generating the heat required to dry clothes effectively. It consists of a heating element and necessary components that work together to maintain the desired drying temperature, ensuring clothes come out dry and ready to wear. Causes of a bad heater assembly can include wear and tear from regular use, overheating, electrical issues, or damage to the heating element itself. A malfunctioning heater assembly can lead to inefficient drying or no heat at all.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.go
WP694089 Dryer Genuine OEM Blower Wheel
The WP694089 is a Genuine OEM replacement dryer blower wheel compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Roper, Estate, Crosley, Inglis, Caloric, Hardwick, and Glenwood 29-inch dryers with a lint filter on top. The blower wheel works together with the drive motor to create the airflow that makes drying possible — it draws heated air through the heating element, pushes it into and through the drum to evaporate moisture from your clothes, and exhausts it out through the vent system. Without a properly functioning blower wheel, airflow drops, drying times increase dramatically, and the dryer may overheat.
Measures 8-5/8" in diameter. Mounts on the motor's blower shaft with left-hand threads — to remove the old blower wheel, turn it clockwise (the reverse of standard threading). This blower wheel fits dryers where the motor is mounted in the rear of the cabinet, not the front. Common causes of failure: the internal sleeve wears out over time, allowing the wheel to wobble on the motor shaft; lint, socks, or small clothing articles escape past the lint filter and jam the wheel; or the plastic fins crack and break from age or debris impact. It directly replaces WP694089, WP694089VP, AP6010602, 279500, 279711, 299678, 338840, 343939, 343941, 686172, 695499, DE601, PS11743785, AH383953, EA383953, and PS383953. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The WP694089 Dryer Blower Wheel fixes Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Estate, and Admiral 29" dryers that take too long to dry, make loud thumping/rattling/scraping noises, have weak airflow, or won't tumble. 8-5/8" diameter. Left-hand threads (turn clockwise to remove). Fits rear-mounted motor dryers with lint filter on top. Replaces WP694089, WP694089VP, AP6010602, 279500, 279711, 299678, 338840, 343939, 343941, 686172, 695499, DE601, PS11743785. Check for trapped lint, socks, or debris before replacing — a jammed wheel may not be broken.
Common Problems This Part Fixes
Dryer takes too long to dry clothes — reduced airflow from a worn or damaged blower wheel
Loud thumping, rattling, or scraping noise during operation — debris caught in the wheel or broken fins
Weak or no airflow from the exhaust vent — wheel wobbling or not spinning properly
Clothes still damp at the end of the cycle — inadequate air circulation
Dryer overheating — restricted airflow causing heat buildup
Blower wheel wobbling on the motor shaft — worn internal sleeve
Sock, small garment, or lint clump jammed in the blower wheel
Blower wheel fins cracked or broken from debris impact or age
Dryer running but drum not turning — severely damaged wheel preventing motor from spinning
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer blower wheel directly replaces the following OEM and cross-reference part numbers:
WP694089, 694089, 279500, 279711, 299678, 338840, 343939, 343941, 695499, DE601, PD00002470, EAP11743785, AP6010602, AWP48132, OEM18031815, PS11743785
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: some Whirlpool dryers use a different blower wheel (such as the 697772) — verify your original part number or model number before ordering.
Compatibility
This blower wheel is compatible with select 29-inch dryers with a lint filter on top from the following brands:
Whirlpool dryers — 29" models with lint filter on top and rear-mounted motor (WED, LER, LEQ, LE series and related)
Kenmore / Sears dryers — select Whirlpool-built models (110-series)
Maytag dryers (select Whirlpool-built models)
KitchenAid dryers (select models)
Jenn-Air dryers (select models)
Amana dryers (select models)
Magic Chef dryers (select models)
Admiral dryers (select models)
Roper dryers (select models)
Estate dryers (select models)
Crosley, Inglis, Caloric, Hardwick, Glenwood dryers (select Whirlpool-built models)
Note: This blower wheel fits dryers where the motor is mounted in the rear of the cabinet (not the front). If your dryer has the motor in the front, this is not the correct blower wheel. Confirm your dryer model number before ordering. Also: before replacing the blower wheel due to noise, check for trapped lint, socks, or small garments caught in the wheel — clearing the debris may resolve the noise without needing a new part.
Key Features
Dryer blower wheel — draws heated air through the heating element, circulates it through the drum, and exhausts it through the vent system
Resolves "takes too long to dry," "loud noise," "weak airflow," "overheating," and "clothes still damp" symptoms when caused by a worn or damaged blower wheel
8-5/8" diameter — matches the original OEM dimensions
Left-hand threads — mounts on the motor's blower shaft (turn clockwise to remove, counterclockwise to install)
Designed for 29" Whirlpool-built dryers with lint filter on top and rear-mounted motor
Replaces WP694089, WP694089VP, AP6010602, 279500, 279711, 299678, 338840, 343939, 343941, 686172, 695499, DE601, PS11743785, AH383953, EA383953, and PS383953
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Roper, Estate, Crosley, Inglis, and more
Genuine OEM replacement part.
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
WP694089
OEM Part Number
WP694089
Part Type
Dryer Blower Wheel
Condition
Genuine OEM
Application
29" Dryers with Lint Filter on Top (Whirlpool platform)
Diameter
8-5/8"
Threading
Left-hand threads (clockwise to remove)
Motor Position
Rear-mounted motor (not front-mounted)
Function
Circulates heated air through the drum and out the exhaust vent
Location
Attached to the motor's blower shaft inside the blower housing
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Roper, Estate, Crosley, Inglis, Caloric, Hardwick, Glenwood
Installation Notes
⚠️ Disconnect Power Before Starting — 240V Circuit (Electric) or Gas Line (Gas) — Wear Work Gloves Disconnect power at the breaker before beginning — electric dryers operate on a 240V circuit. For gas dryers, also shut off the gas supply. Wear work gloves and safety glasses. Pull the dryer away from the wall. Access the blower wheel by removing the dryer's back panel — remove the screws securing the rear panel and set it aside. Locate the blower housing at the bottom rear of the dryer, connected to the motor. The blower wheel is inside this housing, mounted on the motor's blower shaft. Remove the blower housing cover or clamp to expose the wheel. Important: the blower wheel has left-hand threads. To remove the old blower wheel, turn it clockwise (the opposite of standard threading). If the wheel is stuck on the shaft, hold the motor pulley on the other end of the shaft to prevent it from turning while you unscrew the wheel. If the old wheel's plastic hub has seized on the shaft from age, you may need to use a flat-blade screwdriver to gently pry it — some customers report the old wheel breaks apart during removal, which is fine since you're replacing it. Before installing the new wheel, clean out any lint, debris, socks, or clothing articles from the blower housing. Thread the new 694089 blower wheel onto the motor shaft counterclockwise (remember: left-hand threads — counterclockwise tightens). Tighten firmly by hand. Reassemble the blower housing, reinstall the rear panel, push the dryer back into place, and restore power. Run a test cycle and check airflow at the exhaust vent. Tools needed: Nut driver, Phillips screwdriver, flat-blade screwdriver, work gloves, safety glasses.
Frequently Asked Questions
My dryer is making a loud thumping or rattling noise — is the blower wheel the cause?
It's one of the most common causes of dryer noise, yes. There are two main ways the blower wheel causes noise: first, lint, socks, or small clothing articles can escape past the lint filter and get caught in the wheel, where they hit the housing with each rotation — producing a rhythmic thumping or scraping sound. Second, the wheel's internal sleeve can wear out over time, allowing the wheel to wobble loosely on the motor shaft, which creates a rattling or vibrating noise. Before ordering a new wheel, check for trapped debris first — pull the back panel and inspect the blower housing. Clearing a stuck sock may solve the problem immediately. If the wheel wobbles freely on the shaft or has cracked/broken fins, it needs replacement.
Why does the blower wheel have left-hand threads?
The left-hand (reverse) threading is by design. The motor shaft spins in a direction that would naturally loosen a standard right-hand threaded wheel over time. By using left-hand threads, the motor's rotation actually tightens the wheel onto the shaft during operation, preventing it from working loose while the dryer runs. This means: turn clockwise to remove the old wheel (opposite of what you'd expect), and turn counterclockwise to tighten the new wheel onto the shaft. Many customers get stuck at this step because they instinctively turn counterclockwise to loosen — so if the wheel seems stuck, try turning it the other way first.
My dryer takes forever to dry — is the blower wheel the issue?
It can be, but check the easier things first. Long drying times are usually caused by restricted airflow, and the most common culprit is a clogged or kinked exhaust vent hose — clean the entire vent path from the dryer to the outside wall first. Also clean the lint filter and check the lint trap housing for buildup. If the vent system is clear and drying times are still long, the blower wheel is a strong candidate: a worn sleeve that lets the wheel wobble reduces its ability to move air efficiently, and cracked fins reduce airflow even if the wheel still spins. You can test by running the dryer and checking the airflow at the outside exhaust vent — weak or no airflow with a clear vent path points to the blower wheel.
Does this fit dryers with the motor in the front?
No — the 694089 blower wheel is designed for 29" Whirlpool-platform dryers where the motor is mounted in the rear of the cabinet. If your dryer has the motor in the front, it uses a different blower wheel. The easiest way to confirm: look at the back of the dryer — if you can see the motor and blower housing when the rear panel is removed, the motor is in the rear and this wheel fits (verify your model number too). If the motor is accessible from the front, this is not the correct part. Contact our support team with your model number and we'll confirm.
The old blower wheel is stuck on the shaft — how do I get it off?
First, make sure you're turning it the right direction — this has left-hand threads, so turn clockwise to loosen (the opposite of normal). If it's truly stuck from age or corrosion: hold the motor pulley on the other end of the shaft with one hand (or use pliers wrapped in a cloth) to keep the shaft from spinning, then turn the blower wheel clockwise with the other hand. If the plastic hub has seized, a flat-blade screwdriver can help gently pry it. In many cases, an old seized blower wheel will crack and break apart during removal — that's perfectly fine since you're replacing it anyway. Just make sure all the old pieces are cleared from the blower housing before installing the new wheel.
Is this an OEM or aftermarket part?
This is a Genuine OEM replacement part. It is a genuine Whirlpool OEM part, this original WP694089 blower wheel used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and related 29" dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM ✓ Compatibility Support ✓ Secure Checkout
XPARTCO XP6974 Dryer Thermostat Kit Replaces WP3387134, WP3392519, W10900067, 279816
The XPARTCO XP6974 is an aftermarket dryer thermostat kit containing four thermal components for Whirlpool-family electric and gas dryers including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The kit includes the cycling thermostat (WP3387134), thermal fuse (WP3392519), high-limit thermostat and thermal cut-off kit (279816 / W10900067) — the complete set of heat-sensing and safety components that regulate dryer temperature and prevent dangerous overheating.
These four components work together to control and protect the dryer's heating system. When any one of them fails, the dryer may produce no heat, overheat, run too long, or stop mid-cycle. Because a failed thermal fuse is almost always caused by an underlying overheating condition that also stresses the other components, replacing all four together in a single repair is the recommended approach. Includes all wiring hardware needed for installation. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO XP6974 Dryer Thermostat Kit fixes Whirlpool-family dryers that produce no heat, overheat, take too long to dry, or stop mid-cycle. Includes all four thermal components: cycling thermostat (L155-25), thermal fuse (196°F), high-limit thermostat (L250-80), and thermal cut-off (309°F). Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef electric and gas dryers.
Common Problems This Kit Fixes
Dryer produces no heat — thermal fuse or high-limit thermostat has blown
Dryer takes multiple cycles or very long time to dry clothes
Dryer overheats — clothes or drum too hot to touch after a cycle
Dryer shuts off mid-cycle and will not restart
Dryer tumbles normally but generates no heat at all
Dryer runs too long because cycling thermostat is not regulating temperature
Repeated thermal fuse failures — underlying thermostat fault causing recurring overheating
What's in the Kit
Part 1 of 4
WP3387134 Cycling Thermostat
Rated L155-25 · Monitors drum air temperature and cycles the heating element on and off to maintain the set drying temperature · Located on the exhaust duct or blower housing · Should show closed continuity at room temperature
Part 2 of 4
WP3392519 Thermal Fuse
Opens at 196°F (91°C) · One-time safety device located on the exhaust duct · Permanently interrupts power to the heating element if the dryer overheats · Cannot be reset — must be replaced if blown · Most common cause of no-heat in Whirlpool-family dryers
Part 3 of 4
High-Limit Thermostat (279816 / W10900067)
Rated L250-80 · Mounted on the heating element housing · Opens at approximately 250°F to cut power to the heating element if temperature exceeds safe limits · Resets automatically when it cools · Should show closed continuity at room temperature
Part 4 of 4
Thermal Cut-Off Fuse (3977393 / 279816 kit)
Opens at 309°F · Backup one-time safety device on the heating element housing · Permanently interrupts power to the heating element if the high-limit thermostat fails to open · Cannot be reset — must be replaced if blown
Replaces Part Numbers
WP3387134 Cycling Thermostat cross-references:
WP3387134, WP3387134VP, 3387134, 3387135, 3387139, 306910, 3-6910, ET187, AP6008270, PS11741405
WP3392519 Thermal Fuse cross-references:
WP3392519, WP3392519VP, 3392519, 3388651, 694511, 80005, ET401, G4AP0500, AP6008325, PS11741460
279816 High-Limit Thermostat and Thermal Cut-Off Kit cross-references:
279816, 279816VP, W10900067, 3977393, 3977767, WP3977767, WP3977767VP, 3399848, 3399693, 2651, AP3094244, AH334299, EA334299, EAP334299, PS334299
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat kit is compatible with select gas and electric dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers (gas and electric)
Amana dryers
KitchenAid dryers
Roper dryers
Admiral dryers
Estate dryers
Crosley dryers
Inglis dryers
Magic Chef dryers
Important: If your thermal fuse has blown, always check for the root cause before replacing — a clogged exhaust vent is the most common cause of dryer overheating. Clean the full length of the exhaust duct before or after this repair. If the vent is clear, a failed cycling thermostat or high-limit thermostat is likely the root cause.
Key Features
Complete 4-part thermal kit — covers the cycling thermostat, thermal fuse, high-limit thermostat, and thermal cut-off in a single repair
Cycling thermostat (L155-25) — regulates drum temperature to maintain consistent, efficient drying
Thermal fuse (196°F) — one-time safety device that permanently interrupts heat if the dryer overheats
High-limit thermostat (L250-80, ~250°F) — cuts power to the heating element when temperature exceeds safe limits; auto-resets
Thermal cut-off (309°F) — backup one-time safety device protecting against heating element runaway
Replacing all four parts together ensures the complete thermal circuit is renewed — prevents recurrence if a failing thermostat caused the fuse to blow
Includes all wiring hardware for installation
Compatible with 11 major appliance brands on the Whirlpool platform
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Kit Part Number
XP6974
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Kit Includes
1x WP3387134 Cycling Thermostat, 1x WP3392519 Thermal Fuse, 1x High-Limit Thermostat (L250-80), 1x Thermal Cut-Off Fuse (309°F), wiring hardware
Cycling Thermostat Rating
L155-25 (closes at 155°F, opens at 25°F differential)
Thermal Fuse Trip Temp
196°F (91°C) — one-time, non-resettable
High-Limit Thermostat Rating
L250-80 (opens at ~250°F) — auto-resets
Thermal Cut-Off Trip Temp
309°F — one-time, non-resettable
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef
Installation Notes
⚠️ Unplug Dryer and Shut Off Gas Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the back panel of the dryer to access the heating element housing and exhaust duct. The thermal fuse (WP3392519) and cycling thermostat (WP3387134) are located on the exhaust duct or blower housing — disconnect the wires, unscrew the mounting screws, and install the new parts in the same positions. The high-limit thermostat and thermal cut-off (279816 kit) are located on the heating element housing — disconnect the wires and unscrew the mounting screws to remove the old parts and install the new ones. Reconnect all wires to the correct terminals — take a photo before disconnecting to reference during reinstallation. Reassemble the back panel, restore power, and run a test cycle to verify heat. Tip: Before running the dryer, also clean the full length of the exhaust duct — a clogged vent is the most common root cause of dryer overheating and repeated thermal fuse failures. Tools needed: Phillips screwdriver, 1/4" nut driver, needle-nose pliers.
Frequently Asked Questions
What does each part in this kit do?
The cycling thermostat (WP3387134) monitors the air temperature in the exhaust duct and cycles the heating element on and off to maintain the correct drying temperature — it is the part that controls how hot the dryer gets during normal operation. The thermal fuse (WP3392519) is a one-time safety device that permanently cuts power to the heating element if the dryer overheats above 196°F — it is the most common cause of no-heat in Whirlpool-family dryers. The high-limit thermostat opens at approximately 250°F to cut heating element power if temperature gets too high, and resets automatically when it cools. The thermal cut-off is a backup one-time fuse on the heating element that opens at 309°F if the high-limit thermostat fails to protect the heater.
Why should I replace all four parts instead of just the one that failed?
When a thermal fuse blows, it almost always blew because the dryer overheated — and that overheating event put significant stress on all the other thermal components as well. A failing cycling thermostat is the most common cause of repeated thermal fuse failures: if the cycling thermostat stops regulating temperature correctly, the dryer runs too hot, the high-limit thermostat is repeatedly stressed, and the thermal fuse eventually blows. Replacing just the fuse without replacing the cycling thermostat means the same overheating will blow the new fuse. Replacing all four parts at once eliminates that risk in a single repair.
How do I test these parts with a multimeter?
Set the multimeter to continuity or resistance mode. The thermal fuse (WP3392519), cycling thermostat (WP3387134), and high-limit thermostat should all show closed continuity (near-zero resistance) at room temperature. The thermal cut-off should also show closed continuity at room temperature. Any part that reads open (no continuity / infinite resistance) at room temperature has failed and needs to be replaced. A blown thermal fuse or cut-off will always read open — they are one-time devices and cannot reset.
What causes the thermal fuse to blow repeatedly?
The most common cause by far is a clogged exhaust vent — lint accumulation inside the dryer duct restricts airflow, causing heat to build up inside the dryer cabinet until the thermal fuse trips. Always clean the full length of the exhaust duct before and after replacing these parts. Other causes include a failing cycling thermostat that is not regulating temperature correctly, a stuck heating element relay, or a dryer placed in an enclosed space without adequate ventilation.
Is this kit compatible with both electric and gas dryers?
Yes — the XP6974 kit is compatible with both electric and gas Whirlpool-family dryers. Both types use the same cycling thermostat (WP3387134) and thermal fuse (WP3392519). The high-limit thermostat and thermal cut-off (279816 kit) are located on the heating element in electric models and on the burner assembly area in gas models. Always verify your specific model number before ordering to confirm all four parts apply to your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
12638000004021 Genuine OEM Midea Dryer Drum Roller
The 12638000004021 is a genuine Midea OEM dryer drum support roller, sold under the Frigidaire/Midea manufacturing relationship for Midea-built dryers and select Frigidaire, Insignia, and Kenmore dryers using this same platform. This roller sits underneath the drum, along its rear support track, and does the physical work of holding the drum's weight while letting it turn freely as the belt drives it around. A dryer typically uses more than one of these rollers working together to keep the drum properly supported and centered.
Over time, the wheel and bearing inside the roller wear down from the constant heat and rotation the dryer subjects them to, eventually developing a flat spot, seizing up, or simply wearing thin enough that the drum sits unevenly. A worn roller produces a distinctive symptom: a rumbling, squeaking, or thumping noise that rises and falls with drum rotation, often getting louder as a load tumbles. It directly replaces 5304511415, AP7990985.
Quick Answer
The 12638000004021 Genuine OEM Midea Dryer Drum Roller fixes Midea-built dryers (and select Frigidaire, Insignia, and Kenmore dryers on this platform) with a rumbling, squeaking, or thumping noise that rises and falls with drum rotation. Supports and centers the drum on its rear track. Replaces 5304511415, AP7990985.
Common Problems This Part Fixes
Rumbling or grinding noise that rises and falls with drum rotation
Squeaking or squealing noise from inside the dryer during operation
Thumping or knocking noise, especially with a heavier load
Noise that gets louder over time as the roller wears further
Drum that sits unevenly or wobbles slightly when turned by hand
Visible flat spot, cracking, or wear on the roller wheel
Noise that continues even with an empty drum tumbling
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer drum roller directly replaces the following OEM and cross-reference part numbers:
12638000004021, AP7990985, PS18170578, 5304511415, 4056012471, AP8049485, PS17993389.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drum roller is compatible with select Midea-built dryers, and also fits select Frigidaire, Insignia, and select Kenmore dryers built on the same Midea platform.
Note: Always verify your full model number before ordering, since Midea and its partner brands use several different roller designs across their dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
Genuine Midea OEM part — factory-specified wheel and bearing design
Supports the drum along its rear track, allowing smooth rotation as the belt drives it
Resolves "rumbling," "squeaking," and "thumping" noise symptoms caused by roller wear
Direct drop-in replacement for the original roller and axle assembly
Replaces 5304511415, AP7990985.
Compatible with Midea, Frigidaire, Insignia, and select Kenmore dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
12638000004021
Part Type
Dryer Drum Support Roller
Condition
Genuine OEM
Brand
Midea
Location
Rear drum support track
Function
Supports and centers the drum during rotation
Quantity
1 roller
Compatible Brands
Midea, Frigidaire, Insignia, Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. On a gas model, also close the gas shutoff valve before moving the cabinet. Wear work gloves — sheet metal edges inside the cabinet are sharp. Access is typically through the rear panel: remove the screws securing the panel, then release the drum belt from the idler pulley to relieve tension so the drum can be supported and moved slightly for access to the rollers underneath. Photograph the roller and axle positions before removing anything. Remove the retaining clip or fastener holding the worn roller's axle in place, then slide the old roller off. Install the new 12638000004021 roller onto the axle in the same orientation, and secure it with the retaining clip or fastener. While you're in there, check the other rollers by spinning each one by hand — if any feel stiff, gritty, or worn, replace them at the same time, since they're typically the same age and wear on a similar schedule. Re-tension the belt around the idler pulley, reassemble the rear panel, restore power, and run a short empty cycle to confirm the noise has resolved. Tools needed: Phillips screwdriver, nut driver, pliers, work gloves.
Frequently Asked Questions
My dryer makes a rumbling noise that gets louder over time. Is this the part I need?
Yes, this is the classic symptom of a worn drum roller. As the wheel and bearing wear down, the noise typically starts subtle and gradually worsens, often becoming most noticeable with a full load as the extra weight puts more load on the worn wheel. If the noise rises and falls in rhythm with the drum turning, a roller is the most likely cause.
Should I replace just one roller, or all of them?
It's worth checking all of them while you have access. Dryers typically use more than one roller supporting the drum, and since they're the same age and under the same stress, if one has worn out the others are often not far behind. Spin each roller by hand — if any feel stiff, gritty, or rough, replace them together to avoid repeating this repair again soon.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Midea to factory specifications — guaranteed fit, materials, and performance. It matches the original wheel design, bearing, and axle fitment of the drum roller originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 279769 Dryer Thermostat Kit
The XPARTCO 279769 is an aftermarket replacement thermal cut-off and high-limit thermostat kit for Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers. This kit bundles two components that guard against overheating at different thresholds: the 3390291 high-limit thermostat (rated L250-80F) monitors internal temperature and interrupts power at approximately 250°F to prevent overheating, then resets itself automatically once the dryer cools — no replacement needed after each trip. The 3977394 thermal cut-off fuse is the backup: rated at 352°F, it's a one-time safety device that permanently opens the circuit if temperatures climb high enough that the thermostat alone didn't prevent an overheat.
These two parts are sold together and should be replaced together as a set, since they protect the same circuit and tend to be stressed by the same underlying problem. Whirlpool's own guidance is direct: when the thermal cut-off fails, it usually indicates a venting problem, and failing to correct that airflow issue will cause repetitive failures even with new parts installed. Symptoms include the dryer not heating, clothes coming out extremely hot, or the dryer not running at all. This kit is commonly used alongside heating element 4391960. It directly replaces 279769, 279548, 2796769, 279769VP, 2821, 2004, 3387812, 3389946, 3398671, 3977394, 695563, 80001, SET184, SET198, TJSET198, ET184, AP3094224, AH334278, EA334278, EAP334278, PD00002485, PS334278, WP3390291, AP6008306, 3390291, 696397, and PS11741441. As an aftermarket replacement, the 279769 kit is built to OEM-equivalent quality standards.
Quick Answer
The XPARTCO 279769 Dryer Thermostat Kit fixes Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers with no heat, no power at all, or clothes coming out dangerously hot. Includes the 3390291 high-limit thermostat (250°F, auto-resetting) and the 3977394 thermal cut-off fuse (352°F, one-time). Replaces 279548, 2796769, 279769VP, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AP3094224, PS334278, WP3390291, AP6008306, 3390291, 696397, PS11741441. Always inspect and clean the exhaust venting when replacing this kit — a blown thermal fuse is a symptom of restricted airflow, and skipping the vent check leads to repeat failures.
What's In The Kit
Component
Rating
Function
3390291 High-Limit Thermostat
L250-80F (~250°F)
Interrupts power to prevent overheating, resets automatically once the dryer cools.
3977394 Thermal Cut-Off Fuse
352°F
One-time backup safety device — permanently opens the circuit if temperature exceeds safe limits. Cannot reset.
Common Problems This Kit Fixes
Dryer won't start at all — no lights, no tumble, no response
Dryer runs but produces no heat
Clothes coming out extremely hot, hot enough to be uncomfortable to handle
Dryer that stopped working suddenly after running unusually hot
Repeated thermal cut-off failures on a dryer with a known venting issue
Dryer that shuts off prematurely mid-cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermostat kit directly replaces the following OEM and cross-reference part numbers:
279769, 2004, 279548, 2796769, 279769VP, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AH334278, EA334278, AP3094224, OEM9282681, SET184, SET198E, AP334278, L250-80F, PS334278, AWP39149, PD00002485.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat kit is compatible with select Whirlpool electric dryers, and also fits select Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral dryers built on the Whirlpool platform, including model numbers such as:
7MWET4027HW0
WET3300XQ0
WET4027EW0, WET4027EW1
WET4027HW0, WET4027HW1, WET4027HW2
WETLV27FW0, WETLV27HW0, WETLV27HW1, WETLV27HW2, WETLV27HW3
YWET4027EW1, YWET4027HW0, YWET4027HW1, YWET4027HW2
Note: This kit was used on Whirlpool-built electric dryers primarily from 1985 to 1995. Always verify your full model number before ordering, since Whirlpool used several different thermostat and fuse designs across its dryer lineup over the years. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement built to match Whirlpool's factory-specified thresholds for both components
2-piece kit: 3390291 high-limit thermostat (250°F, auto-resetting) and 3977394 thermal cut-off fuse (352°F, one-time)
Resolves "no heat," "no power at all," and "clothes coming out extremely hot" symptoms
Addresses two overheat-protection thresholds in the same circuit at once
Commonly used alongside heating element 4391960
Direct drop-in replacement for both original components
Replaces 279548, 2796769, 279769VP, 3387812, 3389946, 3398671, 3977394, 695563, 80001, AP3094224, PS334278, WP3390291, AP6008306, 3390291, 696397, and PS11741441
Compatible with Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Kit Part Number
279769
Kit Contents
1x High-Limit Thermostat (3390291), 1x Thermal Cut-Off Fuse (3977394)
OEM Part Number
279769
Condition
Aftermarket Replacement
Brand
Whirlpool
High-Limit Thermostat Rating
L250-80F (~250°F, auto-resetting)
Thermal Fuse Rating
352°F (one-time, non-resettable)
Companion Heating Element
4391960 (commonly used together)
Repair Difficulty
Easy to Moderate — basic tools required
Compatible Brands
Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel, near the heating element and blower housing where both components are mounted. Photograph the wiring connections before disconnecting anything, since the thermostat and fuse can be easy to swap positions by mistake. Remove each old component from its mounting position, noting orientation, and disconnect its wiring. Before reassembling, fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. When the thermal cut-off fails, it usually indicates a venting problem, and failing to correct that airflow issue will cause repetitive failures even with these new parts installed. Install the new 3390291 thermostat and 3977394 thermal fuse from this kit in the same positions as the parts they replace, reconnecting wiring exactly as photographed. Reassemble the panel, restore power, and run a full test cycle to confirm normal, consistent heating with no premature shutoffs. Tools needed: Phillips or nut driver (model-dependent), work gloves.
Frequently Asked Questions
My clothes are coming out extremely hot, hot enough to burn my hands. Is this the right kit?
Yes, this is a documented symptom this kit addresses. If the high-limit thermostat fails to regulate temperature correctly, the dryer can run far hotter than it should, producing dangerously hot clothing at the end of a cycle. Whirlpool's own parts support has specifically pointed customers with this exact complaint toward this kit. Stop using the dryer if you notice this symptom and replace both components promptly.
Why do I need to replace both the thermostat and the fuse together?
These two parts protect the same circuit at different thresholds and tend to fail from the same underlying cause. If the high-limit thermostat isn't regulating temperature correctly, the thermal fuse often ends up blowing as the backup safety measure. Replacing only one risks the other failing again shortly after, so they're sold and serviced together as a set.
I replaced this kit and the dryer failed again. What should I check?
This is a strong sign the underlying cause — almost always restricted airflow — was never addressed. Thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. Failing to correct a venting issue will cause repetitive failures of this kit even when it's brand new.
Should I replace the heating element at the same time?
It's worth considering if your dryer's heating element (commonly 4391960 on compatible models) is original and has been running alongside a failing thermostat, since sustained overheating can stress the element as well. It's not required, but since you'll already have the panel open for this repair, it's a reasonable time to inspect the element for visible damage.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the temperature thresholds and mounting configuration of the original 279769 high-limit thermostat and thermal cut-off fuse kit used in compatible Whirlpool, Kenmore, Roper, KitchenAid, Maytag, Amana, Estate, Crosley, and Admiral electric dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DC97-16782A Dryer Drum Roller - Compatible with Samsung Dryers
Product Description
Ensure smooth and quiet dryer operation with the Replacement DC97-16782A Dryer Drum Roller. This high-quality replacement drum support roller, designed for select Samsung and Kenmore dryers, supports the dryer drum for stable rotation during drying cycles. Made of durable plastic, rubber, and metal with a self-lubricating bushing and upgraded ball bearing, it reduces noise and wear. It fixes issues like loud squeaking or rumbling noises, drum not tumbling smoothly, or marks on clothes due to misalignment. Note: Includes one roller, shaft, and two tri-rings; each dryer uses four rollers, so replace in sets (front or rear pairs). Inspect the drum, belt (e.g., 6602-001655), and idler pulley (e.g., DC93-00634A) for wear. Clean lint from the drum and cabinet to prevent overheating.
Replaces part numbers: DC97-16782A, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, AP5325135, PS11749648, PD00002021.
Compatibility:
Compatible with models including but not limited to:
Samsung: DV42H5000EW/A3, DV42H5200EP/A3, DV45H7000EW/A2, DV48H7400EW/A2, DV40J3000EW/A2, DV50K8600EV/A3, DV52J8700EP/A2, DVE60M9900V/A3, DV419AEW/XAA, DV448AGE/XAA, DV316LEW/XAA
Kenmore: 402.89032010, 402.99032010, 402.89032011, 402.89032012
Verify your model number or contact Parts-O-Matic support for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung dryer models.
🔥 Specifications: Drum roller assembly, ~3-1/4" diameter x 1-1/8" width, blue/black plastic and rubber wheel, metal shaft, self-lubricating bushing with ball bearing, includes one roller, one shaft, and two tri-rings, dimensions ~3"L x 2-1/2"W x 3"H.
💰 Cost-Effective Alternative: Replacement roller offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires a putty knife, Phillips screwdriver, flat-blade screwdriver, work gloves, and optional second person; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves loud rumbling or squeaking noises, drum not tumbling, or marks on clothes.
Safety First: Unplug the dryer from the power source and, for gas dryers, shut off the gas valve before installation.
XPARTCO 3406105 Dryer Door Switch Replaces WP3406105
The XPARTCO 3406105 is an aftermarket replacement dryer door switch assembly compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Estate, Crosley, Inglis, Admiral, Jenn-Air, Magic Chef, and Norge. The door switch is a safety component mounted inside the dryer cabinet near the door opening. When the door is closed, the door strike depresses the switch actuator, completing the circuit and allowing the dryer to start and run. When the door is opened, the switch opens the circuit and stops the dryer. On models with a broken belt detection circuit, the door switch also plays a role in belt failure detection. A failed door switch causes the dryer to either not start at all or to run continuously with the door open.
This is a Single Pole, Double Throw (SPDT) 3-wire switch with stainless steel terminals and a heat-resistant housing. It measures 1-3/4" L x 1-5/8" W x 1-1/4" H with a 7-3/4" wiring harness. Electrical specs are 120-240V, 50-60Hz, 11A, 1/3HP. The kit includes the switch and 3-wire harness assembly. It directly replaces WP3406105, 3406104, 3405104, 3405105, 528947, AP6008560, and several additional cross-reference numbers. Installs in 15–30 minutes with basic hand tools.
Quick Answer
The XPARTCO 3406105 Dryer Door Switch fixes Whirlpool-family dryers that won't start, won't stop when the door is opened, or require the door to be slammed to start. SPDT 3-wire switch, 120-240V/50-60Hz/11A/1/3HP. Body 1-3/4" L x 1-5/8" W x 1-1/4" H, 7-3/4" harness. Includes switch and harness assembly. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, and more. Replaces WP3406105, 3406104, 3405104, 528947, AP6008560.
Common Problems This Part Fixes
Dryer will not start at all — door switch not completing the circuit when door is closed
Dryer starts only when the door is slammed or held firmly closed
Dryer continues to run after the door is opened — switch not opening the circuit
Drum light not turning on when the door is opened (on models with drum light)
Dryer starts intermittently — door switch contact worn and making unreliable contact
Dryer stops mid-cycle randomly — switch opening the circuit due to vibration or wear
Door switch visibly cracked, broken, or the actuator button no longer springs back
Replaces Part Numbers
This door switch directly replaces the following OEM and cross-reference part numbers:
WP3406105, 3405104, 3405105, 3406104, 3406105, WP3406105VP, AWP47182, PD00003898, EAP11741700, AP6008560, PS11741700.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is compatible with select gas and electric dryers from the following brands:
Whirlpool dryers (gas and electric)
Kenmore / Sears dryers (Whirlpool-built models)
Maytag dryers (gas and electric)
KitchenAid dryers
Amana dryers
Roper dryers
Estate dryers
Crosley dryers
Inglis dryers
Admiral dryers
Jenn-Air dryers
Magic Chef dryers
Norge dryers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Safety switch — prevents dryer from operating when the door is open and stops the dryer immediately when the door is opened mid-cycle
Single Pole, Double Throw (SPDT) 3-wire switch — provides both normally-open and normally-closed contacts for dryer start circuit and belt failure detection on compatible models
Rated 120-240V, 50-60Hz, 11A, 1/3HP — correct electrical specifications for compatible Whirlpool-family dryers
Switch body: 1-3/4" L x 1-5/8" W x 1-1/4" H; wiring harness: 7-3/4" L
Stainless steel terminals and heat-resistant housing
Kit includes switch and 3-wire harness assembly — complete plug-in replacement
Replaces WP3406105, 3406104, 3405104, 3405105, 528947, and AP6008560
Compatible with 13 major appliance brands on the Whirlpool platform
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–30 minutes with basic hand tools
Product Specifications
Part Number
3406105
OEM Part Number
WP3406105
Part Type
Dryer Door Switch Assembly (SPDT 3-Wire)
Condition
Aftermarket Replacement
Application
Gas and Electric Dryers
Switch Type
Single Pole, Double Throw (SPDT)
Wires
3-wire
Voltage
120-240V
Frequency
50-60Hz
Amperage
11A
Horsepower
1/3 HP
Switch Body Dimensions
1-3/4" L x 1-5/8" W x 1-1/4" H
Harness Length
7-3/4 inches
Color
Off-White / Black / Gray
Material
Plastic / Metal (stainless steel terminals)
Includes
Switch and 3-wire harness assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Estate, Crosley, Inglis, Admiral, Jenn-Air, Magic Chef, Norge
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. The door switch is located inside the dryer cabinet near the door opening, typically mounted in the front panel or top panel. Access it by inserting a putty knife under the top panel to release the spring clips and lift the top, then release the front panel. Locate the old door switch — it is a small rectangular component with a spring-loaded actuator button. Photograph the wiring connections before disconnecting. Disconnect the 3-wire harness from the old switch. Release the switch from its mounting bracket by pressing the retaining tabs and pulling the switch free, or unscrewing the mounting screw. Snap the new 3406105 switch into the mounting bracket and reconnect the 3-wire harness in the same positions. Reassemble the front and top panels, restore power, and run a test cycle to confirm the dryer starts, stops when the door is opened, and runs normally. Tools needed: Phillips screwdriver, putty knife.
Frequently Asked Questions
What does the dryer door switch do?
The door switch is a safety component that monitors whether the dryer door is open or closed. When the door is closed, the door strike depresses the switch actuator, completing the electrical circuit and signaling the control board that it is safe to run. When the door is opened, the actuator releases, opening the circuit and stopping the dryer immediately. On many Whirlpool-family dryers, the 3-wire SPDT switch also provides a secondary circuit used for broken belt detection — one of the switch's contacts is part of the motor start circuit, while the other is part of a safety cutoff circuit.
How do I test the door switch with a multimeter?
Unplug the dryer and disconnect the switch from the harness. Set your multimeter to continuity mode. The 3406105 is an SPDT switch with three terminals — typically labeled Common (C), Normally Open (NO), and Normally Closed (NC). With the actuator button not pressed (door open position), you should read continuity between C and NC, and no continuity between C and NO. With the actuator button pressed (door closed position), you should read continuity between C and NO, and no continuity between C and NC. Any deviation from this pattern confirms the switch has failed.
What is the difference between 3406105 and 3406104?
The 3406104 was the original part number, and the 3406105 (later updated to WP3406105) is the current replacement that superseded it. They are the same door switch and are fully interchangeable. The 3405104 and 3405105 are also cross-references for this same switch from earlier production. If your dryer's documentation or old switch label shows any of these numbers, the 3406105 is the correct current replacement.
Why does this switch have 3 wires when my old switch only had 2?
The WP3406105 is an SPDT (Single Pole, Double Throw) switch with 3 terminals — Common, Normally Open, and Normally Closed. Some older dryer models used a simpler 2-wire switch, but the 3-wire WP3406105 is the updated replacement that works on both older and newer models. On models that originally had a 2-wire switch, only two of the three terminals are used — the third is simply left unconnected. Follow your model's wiring diagram or take a photo of the original switch's wire connections before removing it.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal with stainless steel terminals to match the dimensions and electrical specifications of the original WP3406105 door switch assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 5300622034 Dryer Heater Restring
Terminal Size: 5/16 inch
4600 Watts 240 Volts.
Restring Coil for 131553900, WE14X10015
Replaces Part Numbers: 5300622034, AH451032, EA451032, OEM6405389, AP2135128, PS451032.
Description: This Electric Dryer Heating Element is a replacement part for specific Frigidaire dryer models. Located within the dryer drum cavity, this component produces the necessary hot air to evaporate moisture from wet laundry. Terminal Size: 5/16 inch. This electric dryer heating element restring coil does not include the heater housing insulators.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DC96-00887C - DC47-00018A Dryer Thermostat Set
The XPARTCO DC96-00887C / DC47-00018A is an aftermarket replacement 2-piece thermal protection set for Samsung and select Kenmore electric dryers. These two components sit in different locations along the same heating circuit and guard against overheating in different ways. The DC47-00018A is a true cycling high-limit thermostat — it opens at approximately 260°F to cut power to the heating element, then automatically closes again once the temperature drops to around 210°F, letting the dryer resume heating without any part replacement needed. The DC96-00887C, despite frequently being labeled a "thermostat" by third-party sellers, is actually a one-time thermal fuse mounted with its bracket on the blower housing — once it opens from excess heat, it stays open permanently and must be physically replaced.
Because these two parts monitor different points in the same circuit, they tend to be replaced together when a dryer has been running hot: if the high-limit thermostat has been cycling excessively or failed to catch a temperature spike, the downstream thermal fuse can end up blowing as the last line of defense. Symptoms of failure in this circuit include no heat or insufficient heat, drying that takes too long, the dryer shutting off too soon, or the timer failing to advance. It directly replaces DC96-00887A, AP5966894, 2074129, AP4207819, PS4216838, EAP4216838, WP35001193, 35001193, PS11741822, PS11741829, AP6008689 (DC96-00887C); and 35001092, 1122485, AP4201898, PS4205217, EAP2430930, PS2430930, AP6008682, WP35001092 (DC47-00018A).
Quick Answer
The XPARTCO DC96-00887C - DC47-00018A Dryer Thermostat Set fixes Samsung and select Kenmore electric dryers with no heat or insufficient heat, drying that takes too long, premature shutoff, or a timer that won't advance. Set includes the DC47-00018A cycling high-limit thermostat (260°F open / 210°F reset) and the DC96-00887C thermal fuse with bracket. Replaces the full cross-reference sets listed below for both parts. Despite common marketplace labeling, the DC96-00887C is a one-time thermal fuse, not a resettable thermostat — it must be replaced once it blows, while the DC47-00018A resets itself automatically.
What's In This Set
Component
Type
Function
DC47-00018A
Cycling High-Limit Thermostat
Opens at ~260°F to cut heat, automatically resets and closes again around 210°F. No replacement needed after each trip.
DC96-00887C
Thermal Fuse (with bracket)
Mounted on the blower housing. Permanently opens if temperature exceeds safe limits. Cannot reset — must be replaced once blown.
Common Problems This Set Fixes
Dryer has no heat or insufficient heat
Drying takes too long to complete a cycle
Dryer shuts off too soon, before clothes are fully dry
Timer will not advance through the cycle
Dryer that stopped working suddenly after running unusually hot
Dryer with a history of repeated thermal fuse failures
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer thermostat/thermal fuse set directly replaces the following OEM and cross-reference part numbers:
DC96-00887C, DC96-00887A, AP5966894, PS4276292, WP35001193, 35001193, AP6008689, PS11741829, DC47-00018A, AP4201898, PS4205217, 35001092, WP35001092 AP6008682, PS11741822, EXPDC47-00018A, L260-50F
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This set is compatible with select Samsung electric dryers, and also fits select Kenmore dryers built on the Samsung platform, including model numbers such as:
DV5471AEW/XAA
DV40J3000EW/A2, DV42H5000EW/A3, DV45H7000EW/A2, DV48H7400EW/A2
DV400EWHDWR/AA
DVE50M7450W/A3
Note: Always verify your full model number before ordering, since Samsung uses several different thermal protection components across its dryer lineup. Contact our support team with your model number if you're unsure.
Key Features
2-piece set covering both the cycling high-limit thermostat and the blower housing thermal fuse
DC47-00018A thermostat opens at approximately 260°F and resets automatically around 210°F
DC96-00887C thermal fuse ships with its mounting bracket included
Resolves "no heat," "insufficient heat," "takes too long to dry," and "shuts off too soon" symptoms
Addresses two failure points in the same overheat-protection circuit at once
No special tools required for installation
Replaces the full cross-reference sets for both DC96-00887C and DC47-00018A listed above
Compatible with Samsung and select Kenmore electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Set Contents
1x DC47-00018A high-limit thermostat, 1x DC96-00887C thermal fuse with bracket
Condition
Aftermarket Replacement
Application
Samsung Electric Dryers
DC47-00018A Type
Automatically resetting, cycling high-limit thermostat
DC47-00018A Open Temperature
~260°F
DC47-00018A Reset Temperature
~210°F
DC96-00887C Type
One-time thermal fuse — non-resettable
DC96-00887C Location
Blower housing
Repair Difficulty
Easy to Moderate — no special tools required
Compatible Brands
Samsung, select Kenmore
Installation Notes
⚠️ Unplug Dryer Before Starting — Note Which Component Goes Where Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel, near the blower housing and heater duct assembly where both components are mounted. Photograph the wiring connections before disconnecting anything, since the thermal fuse and thermostat can look similar at a glance and are easy to install in the wrong position. Test each old component with a multimeter for continuity if you want to confirm which has actually failed before replacing both — the DC47-00018A thermostat and DC96-00887C fuse can each be checked this way. Remove each old component from its mounting position, noting orientation and location, and disconnect its wiring. Install the DC47-00018A thermostat and the DC96-00887C fuse (with its bracket) from this set in the same positions as the parts they replace, reconnecting wiring exactly as photographed. Reassemble the panel, restore power, and run a full test cycle to confirm normal, consistent heating with no premature shutoffs. Tools needed: Phillips or nut driver (model-dependent), multimeter (recommended), work gloves.
Frequently Asked Questions
Is DC96-00887C really a thermostat, or something else? Different sellers call it different things.
This is a genuinely common point of confusion in the marketplace, and it's worth clearing up: DC96-00887C is actually a one-time thermal fuse mounted with its bracket on the blower housing, even though many third-party listings label it a "thermostat." The distinction matters for how you diagnose and handle it — once this fuse blows from excess heat, it stays open permanently and must be physically replaced, unlike a true thermostat (like the DC47-00018A in this same set) which resets itself automatically once things cool down.
Why replace both parts together instead of just the one that failed?
These two components sit at different points in the same overheat-protection circuit, and a problem with one often puts stress on the other. If the high-limit thermostat has been cycling excessively or didn't catch a temperature spike in time, the downstream thermal fuse can end up blowing as the last line of defense. Replacing both together addresses the full circuit rather than risking a second failure and a second repair shortly after.
My dryer shuts off before the load is fully dry. Is that this set?
It's a strong possibility. If the high-limit thermostat is tripping prematurely — opening at a lower temperature than it should, or failing to reset properly — the dryer can cut heat and end the cycle early even though the load isn't actually dry yet. This is one of the more common symptoms this thermostat set addresses.
Is this an OEM or aftermarket set?
This is an aftermarket replacement set built to OEM-equivalent quality standards. It is not a genuine Samsung OEM set, but each component is manufactured to match the electrical specifications, opening/reset temperatures, and mounting configuration of the original DC96-00887C thermal fuse and DC47-00018A high-limit thermostat used in compatible Samsung and Kenmore electric dryers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
131775600 Dryer Genuine Blower Wheel and Housing
Complete housing and captive blower assembly.
Fits specific Frigidaire, Electrolux dryer models.
Replaces Part Numbers: 131775600, 131775610, AH418726, EA418726, OEM6322823, AP2107606, PS418726.
Description: This Blower Housing Assembly is a Genuine part for specific Frigidaire dryer models. It houses the blower wheel, which circulates air through the dryer drum and out the exhaust. This assembly ensures that hot air is efficiently directed through the dryer to dry clothes properly. Common Cause is the blower housing assembly can become damaged or worn out, affecting the dryer's performance. Causes of a bad blower housing assembly can include accumulation of lint or debris, wear and tear from frequent use, or physical damage to the housing or blower wheel.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
