XPARTCO W10822580 Refrigerator Evaporator Fan Motor
The XPARTCO W10822580 is an aftermarket replacement evaporator fan motor for Whirlpool refrigerators, and also fits select Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, and Ikea models. This motor circulates air through the fresh food compartment, drawing it across the evaporator coils to pull out heat and maintain efficient, consistent cooling.
Finished in white. Common causes of failure include worn motor bearings or electrical failure over time. Symptoms of a failing evaporator fan motor include the refrigerator section running too warm or too cold, the freezer section running too warm or too cold, leaking water, frost buildup, or unusual noises. As with many refrigerator symptoms, these can also be caused by other components, so this is intended as a guideline rather than a certain diagnosis. It directly replaces W11671461, W10822580, W10255195, W11212356, 2259385, W10436861, UDQT22WP1, AP7214718, AWP46180, EAP2355714, PD00087470, PS2355714.
Quick Answer
The XPARTCO W10822580 Refrigerator Evaporator Fan Motor fixes Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, and Ikea refrigerators running too warm or too cold in either compartment, leaking water, showing frost buildup, or making unusual noises. White finish. Replaces W11671461, W10822580, W10255195, W11212356, 2259385, W10436861, UDQT22WP1, AP7214718, AWP46180, EAP2355714, PD00087470, PS2355714. These symptoms are a guideline, not a certain diagnosis — other refrigerator components can cause the same issues, so confirm your model number and consider other possibilities if replacing this motor doesn't resolve the problem.
Common Problems This Part Fixes
Refrigerator section too warm
Refrigerator section too cold
Freezer section too warm
Freezer section too cold
Leaking water
Frost buildup
Unusual noises
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
W11671461, W10822580, W10255195, W11212356, 2259385, W10436861, UDQT22WP1, AP7214718, AWP46180, EAP2355714, PD00087470, PS2355714
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Whirlpool refrigerators, and also fits select Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, and Ikea refrigerators built on the Whirlpool platform, including select side-by-side models.
Note: Always verify your full model number before ordering, since Whirlpool uses several different evaporator fan motors across its refrigerator lineup. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement evaporator fan motor — circulates air through the fresh food compartment across the evaporator coils
Resolves "too warm," "too cold," "leaking water," "frost buildup," and "unusual noise" symptoms
White finish
Direct drop-in replacement matching the original mounting and connections
Replaces W11671461, W10822580, W10255195, W11212356, 2259385, W10436861, UDQT22WP1, AP7214718, AWP46180, EAP2355714, PD00087470, PS2355714
Compatible with Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPW10822580
OEM Part Number
W10822580
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Color
White
Function
Circulates air through the fresh food compartment across the evaporator coils
Repair Difficulty
Easy to Moderate
Quantity
1 evaporator fan motor
Compatible Brands
Whirlpool, Roper, Admiral, Maytag, Hardwick, Jenn-Air, Estate, Magic Chef, Crosley, Inglis, Norge, Modern Maid, Amana, Kenmore, KitchenAid, Caloric, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Locate the evaporator fan motor, typically found behind an interior panel covering the evaporator coil assembly in the freezer or fresh food compartment depending on your model. If there's noticeable frost or ice buildup around the fan or coil, allow it to fully defrost before continuing. Remove the panel to access the fan motor, then disconnect the wiring harness from the old motor. Remove the mounting screws or clips securing the old motor and pull it free, along with the fan blade if it doesn't transfer separately. Install the new W10822580 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the interior panel. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm normal, quiet operation and consistent cooling. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My refrigerator is running warm. Is this the part I need?
It's a strong possibility, since this is one of the more common causes of a refrigerator or freezer running warmer than normal. That said, per the parts distributor's own guidance, this is intended as a general guideline rather than a certain diagnosis, since other components can produce the same symptom. Confirming with a technician or checking related parts first can help avoid an unnecessary purchase if something else turns out to be the cause.
My refrigerator has frost buildup. Could this motor be involved?
Yes, this is one of the documented symptoms tied to this motor. If airflow through the evaporator area isn't circulating properly due to a failing fan motor, frost can build up excessively in ways that wouldn't happen with normal airflow.
Should I check anything before replacing this motor?
If there's frost or ice buildup around the fan or evaporator coil, it's worth letting that clear before installing the new motor, since built-up ice can restrict the fan's movement and give a false impression that the motor itself has failed.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the motor design, dimensions, and connection type of the original W10822580 evaporator fan motor used in compatible Whirlpool, Roper, Admiral, Maytag, and related refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA97-20025A Refrigerator Condenser Fan Motor
The XPARTCO DA97-20025A is an aftermarket replacement condenser fan motor for Samsung French door, Flex 4-door, and side-by-side refrigerators. This small DC motor lives in the compressor compartment at the back or bottom of the refrigerator, and its job is to pull air across the condenser coils and the compressor itself to carry heat away from the refrigeration system. That's a very different job from an evaporator fan — the condenser fan cools the mechanical side of the system rather than circulating cold air to your food, so a failing condenser fan affects the whole refrigerator's cooling capacity rather than just one compartment.
Rated at 12V DC, 0.11A. When this fan slows down or stops, the compressor and condenser coils can't shed heat properly, which makes the whole system work harder and less effectively — both the fresh food and freezer compartments can run warm together, the compressor may run hot and cycle off on thermal protection, and you may notice increased noise or heat coming from the back or bottom of the cabinet. Common failure modes include worn motor bearings, a jammed blade from dust and debris buildup around the condenser coils, or electrical failure of the motor windings. It directly replaces PD00076495, 4962138, AP6883701, PS12720104, and EAP12720104.
Quick Answer
The XPARTCO DA97-20025A Refrigerator Condenser Fan Motor fixes Samsung French door, Flex 4-door, and side-by-side refrigerators where both compartments run warm together, the compressor runs hot or trips out, the refrigerator runs constantly, or there's unusual noise from the back or bottom of the cabinet. 12V DC, 0.11A. Replaces PD00076495, 4962138, AP6883701, PS12720104, EAP12720104. This cools the compressor and condenser coils — a different part and a different symptom pattern than an evaporator fan, which only affects internal air circulation.
Common Problems This Part Fixes
Both the fresh food and freezer compartments running warmer than normal at the same time
Refrigerator running constantly as the compressor struggles to keep up
Compressor running unusually hot, or shutting off on thermal overload protection
Unusual noise — humming, buzzing, or grinding — coming from the back or bottom of the refrigerator
Ice maker not producing ice due to overall insufficient cooling
Noticeably higher energy use as the compressor works harder to compensate
Fan blade in the compressor compartment that doesn't spin freely or spins with a wobble when checked by hand
Excessive dust or debris buildup visible around the condenser coils and fan
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers:
DA97-20025A, 12 DC 0.11A 2122CNW Z19W12MS1A5-52K09, 4962138, AP6883701, ASM814341, EAP12720104, PD00076495, PS12720104.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with select Samsung French door, Flex 4-door, and side-by-side refrigerators, including model numbers such as:
RF27T5241SR, RF27T5201SR, RF27T5201SG, RF27T5501SR
RF28T5001SG, RF28T5001WW, RF28T5021SR, RF29BB8600QL, RF29BB860012
RF32CG5400SR, RF32CG5300SR, RF32CG5100SR
RF18A5101SR, RF22A4221SR, RF29A9071
RS22T5201SR, RS27T5200SG, RS27T5200SR, RS28A500ASR, RS28CB7600QL
Note — condenser fan, not evaporator fan: This motor cools the compressor and condenser coils in the machine compartment at the back or bottom of the refrigerator. It is a completely different part from an evaporator fan motor (such as our DA31-00334C or DA81-06013A listings), which sits behind the freezer's rear panel and circulates cold air to the food compartments. The two fail with different symptom patterns: a condenser fan problem tends to warm the whole refrigerator evenly and stress the compressor, while an evaporator fan problem typically leaves the freezer relatively fine while the fresh food side goes warm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Aftermarket replacement condenser fan motor — draws air across the condenser coils and compressor to remove system heat
Resolves "whole fridge running warm," "compressor overheating," "runs constantly," and "noise from the back or bottom" symptoms caused by fan failure
Rated 12V DC, 0.11A
Optimized fan blade and motor design for efficient heat dissipation with reduced operating noise
High-quality ball bearings for extended service life
Direct drop-in replacement matching the original mounting and blade fitment
Replaces PD00076495, 4962138, AP6883701, PS12720104, and EAP12720104
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DA97-20025A
OEM Part Number
DA97-20025A
Part Type
Refrigerator Condenser Fan Motor
Condition
Aftermarket Replacement
Brand
Samsung
Location
Compressor/machine compartment (back or bottom of cabinet)
Function
Cools the condenser coils and compressor
Voltage
12V DC
Amperage
0.11 A
Quantity
1 fan motor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Access is from the rear or bottom of the refrigerator, depending on your model: remove the rear access panel, or pull the unit out and remove the base grille/toe-kick panel at the bottom to reach the compressor compartment. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces similar symptoms to a failing motor and costs nothing to rule out. Photograph the wiring harness connector and the fan blade's position before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if it isn't included, matching the original orientation. Mount the new DA97-20025A in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing or coils before reassembling the access panel. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned and the compressor is no longer running hot. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
Both my fresh food and freezer sections are warm. Is this the right part?
Yes, that pattern points toward the condenser fan rather than an evaporator fan. Because the condenser fan cools the compressor and condenser coils that the entire refrigeration cycle depends on, a failing condenser fan tends to reduce cooling capacity across both compartments together, rather than leaving one side fine while the other struggles. If only your fresh food section is warm while the freezer stays cold, that's more typical of an evaporator fan issue instead.
My compressor feels very hot and the fridge cycles off sometimes. Could that be the fan?
Very possibly. Without adequate airflow from the condenser fan, the compressor and coils can't shed heat efficiently, causing the compressor to run hotter than designed. Many compressors have built-in thermal overload protection that shuts them down temporarily if they overheat, which can show up as the refrigerator seeming to randomly stop and restart cooling. Restoring proper condenser airflow is often what resolves this.
Could dirty condenser coils cause the same symptoms as a bad fan motor?
Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix.
Do I need this motor or an evaporator fan motor?
It depends on the symptom and the fan's location. The condenser fan sits in the compressor compartment at the back or bottom of the refrigerator and cools the compressor and coils — a failure here tends to warm the whole unit and stress the compressor. An evaporator fan sits behind the freezer's rear interior panel and circulates already-cold air to the compartments — a failure there typically leaves the freezer relatively unaffected while the fresh food section goes warm. If you're not sure which fan has failed, check which one is running (or not) by listening near each location with the refrigerator open and the door switch triggered manually, or contact our support team with your model number.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 0.11A), fan blade design, and mounting configuration of the original DA97-20025A condenser fan motor used in compatible Samsung refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO EAU65058315 Refrigerator Evaporator Fan Motor
The XPARTCO EAU65058315 is an aftermarket replacement DC evaporator fan motor assembly for select LG and Kenmore refrigerators, replacing LG part EAU65058315. The evaporator fan motor circulates cold air through the refrigerator, helping to keep temperatures consistent and prevent frost buildup. When it wears out or fails, the refrigerator may run too warm or too cold, build up frost, or make unusual noise.
This is the evaporator fan, which moves air across the evaporator coils, not the condenser fan near the compressor. Check your model number before ordering.
Quick Answer
The XPARTCO EAU65058315 Evaporator Fan Motor replaces the evaporator fan motor on a compatible LG or Kenmore refrigerator when it has failed. Classic symptoms: the refrigerator or freezer is too warm, frost builds up, or the fan makes unusual noise. Other parts can cause the same symptoms, so confirm the fan is the problem first.
Common Problems This Part Fixes
Refrigerator or freezer too warm or too cold
Frost buildup
Unusual noises from the fan area
Moisture or water leaking
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor directly replaces the following part number:
EAU65058315, EAU63103209, ODM-056F-15, ALG54104, AP6247423, EAP12115088, PD00081425, PS12115088, PS17308826, AP7211789
LG uses many similar fan motor numbers for different models. If your old motor shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This evaporator fan motor is listed for LG, Kenmore and Kenmore Elite bottom-mount refrigerators, including these examples:
LG LFX25974SW, LFCS22520S, LFDS22520S
Kenmore 79570339411, 79579412811, 79579412810
Kenmore Elite 79579049314, 79579044313
Note: The models above are a sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the LG EAU65058315 evaporator fan motor
DC motor assembly
Circulates cold air through the refrigerator
Helps keep temperatures consistent and prevent frost buildup
Product Specifications
Part Number
XPEAU65058315
OEM Part Number
EAU65058315
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Motor Type
DC
Application
Select LG, Kenmore & Kenmore Elite Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator and move perishable food to a cooler before you begin. Wear work gloves. Follow your model's service guide to reach the evaporator fan, note how the wiring connects, and swap the motor. Reconnect the wiring, restore power, and check that the fan runs quietly.
Frequently Asked Questions
My refrigerator is running warm. Is this the part I need?
It can be, if the evaporator fan has failed. Other parts can cause the same symptoms, so confirm the fan is not blocked by frost and that it fails to spin before replacing it.
Is this the evaporator fan or the condenser fan?
This is the evaporator fan motor, which circulates cold air through the refrigerator. The condenser fan motor is a different part, located near the compressor.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace LG part EAU65058315. If you specifically need a genuine LG part, contact our support team.
Will this fit my refrigerator?
It is listed for select LG, Kenmore and Kenmore Elite bottom-mount models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA81-06013A Refrigerator Evaporator Fan Motor
The XPARTCO DA81-06013A is an aftermarket replacement evaporator fan motor compatible with a wide range of Samsung French door and bottom-mount refrigerators across the RF18, RF22, RF23, RF24, RF25, RF26, RF28, RF30, and RF34 series. The evaporator fan motor is the "heart" of the refrigerator's cooling cycle — it pulls air across the cold evaporator coils in the freezer section and circulates it throughout the freezer and fresh food compartments. This constant airflow is what keeps temperatures even and food fresh. When the fan motor fails, cooling efficiency drops, compartments run warm, frost can build up on the coils, and the ice maker may stop working properly.
This is an axial evaporator fan and motor assembly with a 3-wire harness. Electrical specs: 12V DC, 0.16A. Frame dimensions: 3-5/8"L x 1-3/4"W x 3-5/8"H, with the harness and plug extending 10-3/4" from the frame. Black with a multi-colored harness, plastic and metal construction. It directly replaces DA31-00287A, U92C12MS1B3-52, 3612JL-04W-S49, 3967908, AP5914786, EAP9603956, PD00031112, and PS9603956. Important: Samsung uses several different evaporator fan motors across its refrigerator lineup with different connectors and voltages — always match your old motor's part number and connector before ordering. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO DA81-06013A Refrigerator Evaporator Fan Motor fixes Samsung French door and bottom-mount refrigerators where the fridge or freezer is too warm, cooling is poor, frost builds up on the evaporator coils, unusual noise comes from the freezer, or the ice maker stops working. Axial fan + motor assembly, 3-wire harness. 12V DC, 0.16A. Frame 3-5/8"L x 1-3/4"W x 3-5/8"H. Replaces DA31-00287A, U92C12MS1B3-52, 3612JL-04W-S49, 3967908, AP5914786, EAP9603956, PD00031112, PS9603956. Compatible with Samsung RF18/RF22/RF23/RF24/RF25/RF26/RF28/RF30/RF34 series. Match your old motor's connector before ordering — Samsung uses several different evaporator fan motors.
Common Problems This Part Fixes
Refrigerator or freezer section too warm — fan not circulating cold air
Poor cooling effect — inadequate airflow across the evaporator coils
Uneven or abnormal temperatures throughout the refrigerator
Frost or ice buildup on the evaporator coils or in the freezer
Unusual noise (grinding, squealing, clicking) from the freezer compartment — failing motor bearings or the blade rubbing on frost
Ice maker not working properly due to inadequate cooling
Refrigerator running continuously trying to compensate for poor air circulation
Fan motor not spinning at all when the compressor is running
Food spoiling faster than normal
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
DA81-06013A, 3612JL-04W-S49, 3967908, DA31-00287A, MX9232ABM1, U92C12MS1B3-52, AP5914786, ASM1162115, EAP9603956, OEM17744367, PD00031112, PS9603956
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: Samsung uses several different evaporator fan motors with different connectors — verify your original motor's part number before ordering.
Compatibility
This evaporator fan motor is compatible with select Samsung French door and bottom-mount refrigerators, including:
Samsung RF28 series — RF28HMEDBSR, RF28HFEDTSR, RF28HFEDBSR, RF28HDEDBSR, RF28HDEDPWW, RF28HFEDBSG, RF28HMEDBBC, RF28HMEDBWW, RF28JBEDBSG, RF28JBEDBSR, RF28R7201SR, RF28R6241SR series
Samsung RF26 series — RF26HFENDSL, RF26HFENDSR, RF26HFENDWW, RF26HFENDBC, RF26J7500SR, RF26J7500BC, RF26J7500WW series
Samsung RF25 series — RF25HMEDBSR, RF25HMEDBBC, RF25HMEDBSG series
Samsung RF263 series — RF263BEAESR, RF263BEAESG, RF263BEAEBC, RF263TEAESR, RF263TEAESG, RF263TEAEBC, RF263TEAEWW series
Samsung RF260/RF261/RF265 series — RF260BEAESR, RF260BEAESG, RF260BEAEWW, RF261BEAESR, RF261BEAEBC, RF261BEAEWW, RF265BEAESR, RF265BEAESG series
Samsung RF23/RF24 series — RF23HCEDBSR, RF23HCEDTSR, RF23HTEDBSR, RF24FSEDBSR, RF24J9960S4 series
Samsung RF22/RF30/RF32/RF34/RF42 series — RF22KREDBSR, RF22KREDBSG, RF22NPEDBSR, RF22NPEDBSG, RF30HBEDBSR, RF30KMEDBSR, RF323TEDBSR, RF323TEDBBC, RF4267HARS series
Samsung RF18 series — RF18HFENBSR and related bottom-mount models
Important — Match Your Connector Before Ordering: Samsung uses several different evaporator fan motors across its refrigerator lineup, with different voltages (12V DC here) and connector styles. This DA81-06013A is a 12V DC motor with a 3-wire harness. Before ordering, compare your old motor's part number and connector to this part — a similar-looking motor with a different connector or voltage (such as the BLDC DA31-00342A used in some RS-series models) is NOT interchangeable. Contact our support team with your model number if you're unsure.
Key Features
Evaporator fan motor — pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments for even cooling
Resolves "too warm," "poor cooling," "frost buildup," "noisy freezer," and "ice maker not working" symptoms when caused by fan motor failure
Axial evaporator fan and motor assembly with 3-wire harness
Electrical specs: 12V DC, 0.16A
Frame dimensions: 3-5/8"L x 1-3/4"W x 3-5/8"H · harness and plug extend 10-3/4" from the frame
Black with multi-colored harness, durable plastic and metal construction
No software or firmware update required — direct drop-in replacement
Replaces DA31-00287A, U92C12MS1B3-52, 3612JL-04W-S49, 3967908, AP5914786, EAP9603956, PD00031112, and PS9603956
Compatible with Samsung RF18/RF22/RF23/RF24/RF25/RF26/RF28/RF30/RF34 series French door and bottom-mount refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
DA81-06013A
Part Type
Refrigerator Evaporator Fan Motor Assembly
Condition
Aftermarket Replacement
Application
French Door & Bottom-Mount Refrigerators (Samsung platform)
Fan Type
Axial evaporator fan
Voltage
12V DC
Current
0.16A
Wiring
3-wire harness
Frame Dimensions
3-5/8"L x 1-3/4"W x 3-5/8"H
Harness/Plug Reach
10-3/4" from frame
Color
Black with multi-colored harness
Material
Plastic / Metal
Location
Freezer section, behind rear evaporator panel
Compatible Brands
Samsung
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves — Match the Connector Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located in the freezer section behind the rear access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's frost or ice buildup on the rear panel or coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily. Remove the screws securing the rear evaporator access panel and lift it away to expose the fan motor. Photograph the wiring harness connection and fan motor orientation before disconnecting anything. Before installing, compare the new motor's connector and part number to your old one — they must match. Disconnect the wiring harness by gently pulling the plug, and remove the two mounting screws holding the fan motor assembly in place. Remove the old motor. Install the new DA81-06013A in the same position and orientation, secure with the two mounting screws, and reconnect the wiring harness by firmly pushing the plug in until it seats. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. No software or firmware update is required. Tools needed: Phillips screwdriver (or electric screwdriver), work gloves.
Frequently Asked Questions
How do I know if my evaporator fan motor has failed?
The most common signs are a refrigerator or freezer that's too warm despite the compressor running, poor or uneven cooling, and frost building up on the evaporator coils because air isn't being circulated. You may also hear unusual noise (grinding, squealing, or clicking) from the freezer compartment as the motor bearings fail or the blade rubs on accumulated frost. To confirm: with the refrigerator running, open the freezer and listen/look for the fan behind the rear panel — if it's not spinning while the compressor runs, or it's making noise, the motor has likely failed. You can also test the motor with a 12V DC power source; a working motor will spin when powered.
Samsung has several similar-looking fan motors — how do I know this is the right one?
This is the critical thing to get right. Samsung uses several different evaporator fan motors across its refrigerator lineup, and while they look similar, they differ in voltage and connector style and are NOT interchangeable. The DA81-06013A is a 12V DC motor with a 3-wire harness, used across the RF18/RF22/RF23/RF24/RF25/RF26/RF28/RF30/RF34 French door and bottom-mount series. A different motor — such as the BLDC DA31-00342A used in some RS-series side-by-side models — has a different connector and won't work here. Before ordering, find the part number printed on your old motor, or match your refrigerator's model number against the compatibility list. When in doubt, send us your model number and we'll confirm.
Do I need to update any software or firmware after installing this?
No — this is a simple mechanical fan motor with no electronics that require programming. Unlike some Samsung refrigerator control boards or main PCBs, the evaporator fan motor is a direct drop-in replacement: disconnect the old one, connect the new one, and it works immediately. There's no pairing, calibration, or firmware update needed. Just make sure the connector matches and the fan blade spins freely after installation.
Should I defrost the freezer before installing this?
If there's frost or ice buildup on the rear freezer panel or evaporator coils, yes — clear it before installing the new motor. Leave the freezer empty and unplugged with the door open for several hours (longer for heavy ice) to let everything thaw naturally, with towels at the base to catch melt water. Never chip or pry ice off the evaporator coils with a tool — the aluminum fins are delicate and a damaged coil is a far more expensive repair. If heavy frost keeps returning after the fan motor is replaced, the defrost system (defrost heater, sensor, or control) should be investigated as a secondary issue.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 0.16A), 3-wire harness, connector, frame dimensions (3-5/8"L x 1-3/4"W x 3-5/8"H), and cooling function of the original DA81-06013A evaporator fan motor used in compatible Samsung French door and bottom-mount refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5304530651 Refrigerator Genuine OEM Evaporator Fan Motor
115V 60hz 2.8W
Replaces Part Numbers: 5304530651, 242077704, AP7179350, PS16660872
Description: This Evaporator Fan Motor is a Genuine OEM part for specific Electrolux, Frigidaire refrigerator models. It is responsible for circulating air throughout the refrigerator’s interior to maintain consistent cooling and optimal temperature distribution. This motor works to move air over the evaporator coils, aiding in the cooling process and ensuring that the refrigerator and freezer compartments remain at the desired temperature.
Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor - Compatible with GE, Hotpoint, RCA, Kenmore
Product Description
Restore efficient cooling with the Genuine GE WR60X10307 Refrigerator Evaporator Fan Motor. This OEM evaporator fan motor is designed for select GE, Hotpoint, RCA, and Kenmore refrigerators, circulating air over the evaporator coils to maintain consistent temperatures in both refrigerator and freezer compartments. It includes a 6-pin harness with a 2-wire thermistor, addressing issues like noisy operation, inconsistent temperatures, or frost buildup, delivering reliable performance as an authentic GE part.
Note: Includes one evaporator fan motor with 6-pin harness and thermistor. Disconnect power before installation. Check evaporator fan blade and related components (e.g., thermistor) for optimal performance.
Replaces part numbers: WR60X10307, WR60X10099, WR60X10224, WR60X30370, 197D4968G009, FDQT26GE6, PD00001317, EAP2364950, AP4438809, 1550741, PS2364950.
Compatibility:
Compatible with models including but not limited to:
GE: 39631UGTAWW, 39631UGXAWW, 39639USTAGV, GSS25SGMDBS, GSS25WGMDBB, GSS25WGMDBB, HSS25GFPAWW, PSS26SGPASS
Hotpoint: HSS25IFMDWW, HSS25IFMCCC
RCA: RSG20IDMBFWW
Kenmore: 363.58541890, 363.58542890
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, and Kenmore refrigerators.
❄️ Specifications: OEM evaporator fan motor, 9.75V DC, 3.25W, includes 6-pin harness with 2-wire thermistor.
💪 Reliable Performance: Authentic GE part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver, pliers, work gloves; typically installed in 30–45 minutes.
🛡️ Effective Fixes: Resolves noisy operation, inconsistent temperatures, frost buildup, or refrigerator running continuously.
Product Specification
Part Number: Genuine GE WR60X10307
Component Type: Refrigerator evaporator fan motor
Material: Plastic housing, metal motor components
Electrical Specs: 9.75V DC, 3.25W
Mounting: Screw-mounted in freezer compartment behind evaporator cover
Operating Conditions: Suitable for low-temperature refrigerator environments
Compliance: UL-listed components, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
XPARTCO EAU63923603 Refrigerator Evaporator Fan Motor
The XPARTCO EAU63923603 is an aftermarket replacement evaporator fan motor assembly compatible with a wide range of LG and Kenmore LG-built French door, side-by-side, and bottom-freezer refrigerators — including the LFCC, LFCS, LFXC, LFXS, LMXC, LMXS, LRDCS, LRFCS, LRFDS, LRFWS, LRFXS, LRMVS, LRMXC, and LRMXS series. The evaporator fan motor draws air across the cold evaporator coils and circulates it through the fresh food compartment. This constant airflow is what keeps the refrigerator section at temperature. When the fan motor fails, the most telling symptom is that the refrigerator section runs warm while the freezer stays cold — because the coils are still producing cold, but nothing is moving that air up into the fridge.
Electrical specs: DC 12V, 1.0A, with a 4-pin connector. Motor body: 75 x 55 x 25 mm. Shaft: 46 mm (1.81") long, 3.0 mm diameter. Lead length: 70 cm (27.5"). Housing made from durable ABS plastic with quality metal internal components. It directly replaces EAU63923603, EAU65058305, EAU63923606, AP6317197, PS12383671, EAP12383671, and PD00045140. Note: this is an upgraded replacement design — the motor body may look slightly larger than your original, but the mounting holes and connector locations are identical, so fit and compatibility are unchanged. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO EAU63923603 Refrigerator Evaporator Fan Motor fixes LG and Kenmore LG-built refrigerators where the fridge section is warm but the freezer is cold, cooling is insufficient, the freezer has excessive frost, the fan is noisy, or the fan doesn't spin at all. DC 12V, 1.0A, 4-pin connector. Body 75x55x25mm · Shaft 46mm L x 3.0mm dia · 70cm (27.5") lead. ABS housing. Replaces EAU65058305, EAU63923606, AP6317197, PS12383671, EAP12383671, PD00045140. Compatible with LG LFCC/LFCS/LFXC/LFXS/LMXC/LMXS/LRDCS/LRFCS/LRFDS/LRFWS/LRFXS/LRMVS/LRMXC/LRMXS series. Upgraded design — may look slightly larger, but mounting holes and connector are identical.
Common Problems This Part Fixes
Refrigerator (fresh food) compartment warm while the freezer stays cold — the signature symptom of evaporator fan motor failure
Insufficient cooling throughout the refrigerator
Uneven or inconsistent temperatures between compartments
Excessive frost buildup in the freezer or on the evaporator coils
Unusual or loud noises coming from the fan area — failing motor bearings or a blade rubbing on frost
Fan motor doesn't run or the fan blade doesn't spin at all
Visible damage or obstruction to the motor or fan blades
Refrigerator running continuously to compensate for poor air circulation
Food spoiling faster than normal in the fresh food compartment
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
EAU63923603, EAU63923606, EAU65058305, AP7178305, ALG53955, AP6317197, PD00045140, PS12383671.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. LG uses several different evaporator fan motors across its refrigerator lineup — verify your original motor's part number and connector before ordering.
Compatibility
This evaporator fan motor is compatible with select LG and Kenmore refrigerators, including:
LG French door refrigerators — LFCC22426S (/00, /01), LFCC23596S (/01), LFCS27596S (/00, /01), LFCS28768S (/00) series
LG French door refrigerators — LFXC22526D (/00, /02, /04, /10), LFXC22526S (/00, /01), LFXC22596D (/00), LFXC22596S (/00, /01) series
LG French door refrigerators — LFXS26596D (/01), LFXS26596M (/00), LFXS26596S (/00, /01), LFXS26973D (/00), LFXS28566D, LFXS28566S, LFXS28596D, LFXS28596M, LFXS28596S, LFXS28968D, LFXS28968S series
LG French door refrigerators — LMXC22626D, LMXC22626S, LMXS28596M, LMXS28596S, LMXS28626S, LMXS28636S series
LG refrigerators — LRDCS2603S, LRFCS2503S, LRFDS2503S, LRFWS2906D, LRFWS2906S, LRFXS2503S, LRFXS2503D series
LG refrigerators — LRMVS2806D, LRMVS2806S, LRMXC2206D, LRMXC2206S, LRMXS2806S series
Kenmore / Sears refrigerators — select LG-built models (including 795-series such as 79574109810)
Note: This is an upgraded replacement design — the motor body may appear slightly larger than your original, but the mounting holes and connector locations are identical, so fit and compatibility are unchanged. LG uses several different evaporator fan motors across its lineup with different voltages and connectors — verify your original motor's part number and 4-pin connector before ordering. Contact our support team with your model number if you're unsure.
Key Features
Evaporator fan motor assembly — circulates air across the evaporator coils and through the fresh food compartment for efficient, even cooling
Resolves the classic "fridge warm, freezer cold" symptom of evaporator fan failure
Also fixes insufficient cooling, excessive frost, unusual fan noise, and a fan that won't spin
Electrical specs: DC 12V, 1.0A with a 4-pin connector
Motor body: 75 x 55 x 25 mm · Shaft: 46 mm (1.81") long x 3.0 mm diameter · Lead length: 70 cm (27.5")
Durable ABS plastic housing with quality metal internal components for long service life
Upgraded design — body may be slightly larger than the original, but mounting holes and connector locations are identical
Cost-effective repair — restores cooling performance instead of replacing the whole refrigerator
Replaces EAU65058305, EAU63923606, AP6317197, PS12383671, EAP12383671, and PD00045140
Compatible with LG LFCC, LFCS, LFXC, LFXS, LMXC, LMXS, LRDCS, LRFCS, LRFDS, LRFWS, LRFXS, LRMVS, LRMXC, LRMXS series and Kenmore LG-built refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
EAU63923603
Part Type
Refrigerator Evaporator Fan Motor Assembly
Condition
Aftermarket Replacement
Application
French Door, Side-by-Side & Bottom-Freezer Refrigerators (LG platform)
Voltage
DC 12V
Current
1.0A
Connector
4-pin
Motor Body Dimensions
75 x 55 x 25 mm
Shaft Length
46 mm (1.81")
Shaft Diameter
3.0 mm
Lead Length
70 cm (27.5")
Housing Material
ABS plastic
Design Note
Upgraded — body may be slightly larger; mounting holes and connector identical
Compatible Brands
LG, Kenmore (LG-built)
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located behind the rear evaporator access panel. Remove the shelves, drawers, and any items blocking access to the back wall of the compartment. If there's frost or ice buildup on the panel or coils, allow it to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily and a damaged coil is a far more expensive repair. Remove the screws securing the rear access panel and lift it away to expose the evaporator coils and fan motor. Photograph the wiring connection, fan blade position, and motor orientation before disconnecting anything. Disconnect the 4-pin wiring connector by gently pulling the plug. Remove the fan blade from the motor shaft (note its orientation — it must go back the same way), then remove the mounting screws holding the motor in place and lift out the old motor. Install the new EAU63923603 motor in the same position and orientation — the mounting holes and connector location match the original even though the body may look slightly larger. Secure the mounting hardware, reinstall the fan blade on the 3.0 mm shaft, and reconnect the 4-pin wiring connector until it seats firmly. Confirm the fan blade spins freely by hand without rubbing on any surrounding surface. Reinstall the rear access panel, shelves, and drawers. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
My refrigerator section is warm but the freezer is still cold — is this the fan motor?
This is the single most common and telling symptom of a failed evaporator fan motor. Here's why: the evaporator coils (which produce the cold) sit in the freezer section, and the evaporator fan is what pushes that cold air into the fresh food compartment. When the fan motor fails, the freezer stays cold (it's right next to the coils) but the fridge warms up because no air is being circulated to it. If your freezer is cold and your fridge is warm, the evaporator fan motor is the prime suspect. You can confirm by listening for the fan when the compressor runs, or by opening the rear evaporator panel to see if the fan spins.
The new motor looks bigger than my old one — is it the right part?
Yes — this is an upgraded replacement design, and it's normal for the motor body to appear slightly larger than the original LG unit. What matters is that the mounting holes and connector locations are identical to the original, so it bolts into the same position and plugs into the same 4-pin harness. The shaft (46 mm long, 3.0 mm diameter) also matches, so your existing fan blade transfers over. Compatibility is unchanged. If you have any concern, compare the mounting hole spacing and the connector to your old motor before installing.
Why is my evaporator fan making noise?
A noisy evaporator fan usually means one of two things: the motor bearings are wearing out (producing grinding, buzzing, or squealing), or the fan blade is rubbing against frost or ice that has built up around it. If frost buildup is the cause, that often points to a secondary problem in the defrost system (defrost heater, sensor, or control) allowing ice to accumulate where it shouldn't. Replacing a worn-out fan motor resolves the bearing noise. If heavy frost keeps returning after replacement, investigate the defrost system next.
LG has several similar fan motors — how do I know this is the right one?
LG uses several different evaporator fan motors across its refrigerator lineup, and while they look similar, they differ in voltage, current, shaft dimensions, and connector style. The EAU63923603 is a DC 12V / 1.0A motor with a 4-pin connector, 46 mm shaft, and 70 cm lead, used across the LFCC/LFCS/LFXC/LFXS/LMXC/LMXS/LRDCS/LRFCS/LRFDS/LRFWS/LRFXS/LRMVS/LRMXC/LRMXS series. Before ordering, find the part number printed on your old motor and confirm it's EAU63923603 or one of the listed cross-references (EAU65058305, EAU63923606, AP6317197, PS12383671). If your motor shows a different number, contact our support team with your model number and we'll confirm the correct motor.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured with an ABS housing and quality metal internal components to match the electrical specifications (DC 12V, 1.0A), 4-pin connector, shaft dimensions (46 mm x 3.0 mm), mounting hole pattern, and cooling function of the original EAU63923603 evaporator fan motor used in compatible LG and Kenmore LG-built refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPHVP-16 Microwave Convection Oven High Voltage Diode – Replaces TurboChef 100481 – Compatible with Commercial & Residential Microwave Models
Product Description
Restore proper heating performance in your commercial or residential microwave with the XPHVP-16 Microwave Convection Oven High Voltage Diode. This high-quality aftermarket diode replaces TurboChef 100481 and is engineered to handle the elevated heat and voltage levels found in high-speed ovens and convection microwave systems. A failing HV diode can cause the microwave to run without heating, blow fuses, or produce loud humming sounds. Installing this XPHVP-16 diode restores safe high-voltage operation and consistent heating.
Replaces Part Numbers
XPHVP-16, TurboChef 100481, HV07-16, HVP-16, TBC100481, CKTE100481 equivalent high-voltage microwave diodes.
Compatibility
This aftermarket high-voltage diode replaces TurboChef 100481 and fits many commercial and household microwave or convection microwave ovens, including:
Fits specific TurboChef models including Bullet, ECO ST, Encore, Encore 2, G5, I3, NGC, NGC2, NGO, Sota/I1, TORNADO 2, i5.
Typical compatible equipment includes:TurboChef High-Speed Ovens, and other convection microwave systems requiring a 12–16kV diode.
Always verify electrical specifications before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to replace TurboChef 100481 and match OEM electrical performance
🔥 High-Heat & High-Voltage Rated – Built for demanding commercial microwave environments
💰 Cost-Effective Commercial Repair – A reliable alternative to costly OEM replacement parts
🛡️ Solves Common Issues – Fixes no-heat conditions, humming, blown fuses, and weak heating output
📐 Product Specification
Part Number: XPHVP-16
Replaces: TurboChef 100481
Component Type: High Voltage Rectifier Diode
Voltage Rating: 12–16 kV peak
Current Rating: Max. Forward Current 750MA
Polarity: Standard microwave HV polarity (stripe = cathode)
Material: Heat-resistant high-voltage diode with insulated leads
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Screwdriver, insulated gloves, needle-nose pliers
⚠️ Safety First: Microwave and commercial oven repairs involve dangerously high voltage even when unplugged. Only qualified technicians should replace HV components.
Steps (for trained professionals):
Disconnect power and properly discharge the HV capacitor.
Remove the microwave or oven’s service cover.
Locate the HV diode near the capacitor and transformer.
Remove the old diode and install the new XPHVP-16, ensuring correct polarity.
Reassemble unit and test heating performance.
⏱️ Time Required: 20–30 minutes (professional repair recommended)
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance & Commercial Equipment Parts Supplier
🔄 30-Day Return Policy
Restore powerful, consistent heating — Add to Cart Now for a reliable and cost-effective replacement!
DA97-15765C Refrigerator Genuine OEM Condenser Fan Motor
Replaces Part Numbers: DA97-15765C, DA97-15765A, DA97-12842A, DA97-12842B, DA97-12842D, DA97-15765D, AP6001015, PS11733650.
Description: This Refrigerator Condenser Fan Motor Assembly is an essential component designed to maintain optimal cooling performance in select Samsung refrigerator models. This Genuine OEM part ensures reliable operation by efficiently circulating air through the condenser coils, preventing overheating and maintaining consistent temperatures.
W10633627 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air Refrigerators
Product Description
Keep your refrigerator cooling efficiently with the W10633627 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved fan motor circulates cold air throughout the refrigerator and freezer compartments, maintaining consistent temperatures and preventing frost buildup. A failing fan motor can cause uneven cooling, temperature fluctuations, or unusual noises. Replacing it with this genuine OEM part restores quiet, efficient performance and reliable cooling.
Replaces Part Numbers
W10633627, 3023615, W10395278, W10673906, W10724602, W10798934, PD00005920, EAP8691851, AP5781863, PS8691851.
Compatibility
This genuine evaporator fan motor is compatible with select Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air refrigerators.
Example compatible models include (but are not limited to): Whirlpool WRS325SDHZ01, Maytag MFF2558FEZ04, and KitchenAid KRFF507HPS00.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM Replacement – Factory-approved evaporator fan motor for Whirlpool-brand refrigerators
❄️ Improves Air Circulation – Ensures consistent cooling across all compartments
💰 Long-Lasting Performance – OEM-tested for quality and reliability
🛠️ Easy Installation – Installs in under 30 minutes with basic tools
🛡️ Fixes Common Issues – Resolves poor cooling, noisy operation, or frost buildup
📐 Product Specification
Part Number: W10633627
Component Type: Refrigerator Evaporator Fan Motor
Material: Durable plastic housing with precision-balanced motor
Mounting: Direct-fit replacement for rear freezer panel
Operating Conditions: Designed for refrigerator and freezer use
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the refrigerator before beginning repairs to avoid electrical shock.
Steps:
Unplug refrigerator and remove freezer shelves.
Take off the rear panel inside the freezer compartment.
Disconnect wiring harness from the old fan motor.
Remove mounting screws and replace with the new W10633627 fan motor.
Reconnect wiring, reinstall the rear panel, and restore power.
Confirm that the fan runs quietly and air circulation is restored.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your refrigerator cooling efficiently — Add to Cart Now for a genuine, factory-approved repair!
XPARTCO WB27X11212 Microwave Thermostat – Compatible with GE, Hotpoint & Kenmore Microwaves
Product Description
Ensure safe microwave operation with the XPARTCO WB27X11212 Microwave Thermostat. This high-quality aftermarket replacement monitors internal temperatures and shuts off power if overheating is detected. A faulty thermostat can cause the microwave to shut off unexpectedly, fail to heat, or stop mid-cycle. Replacing it with this reliable XPARTCO thermostat restores proper temperature regulation and protects critical internal components.
Replaces Part Numbers
WB27X11212, 3026293, SE-7350-006, KSD201 - 120C, WB24X28948, WB27X10854, AP5791056, PS8754627.
Compatibility
This replacement microwave thermostat fits select GE, Hotpoint, and Kenmore microwave ovens.
Example compatible models include (but are not limited to):GE JVM1540DM5BB, JVM3160RFSSHotpoint RVM5160DHBBKenmore 363.62709300
Always verify your microwave’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM temperature-sensing performance
🌡️ Overheat Protection – Prevents damage by cutting power at unsafe temperatures
💰 Cost-Effective Repair – Reliable solution without OEM pricing
🛠️ Direct-Fit Design – Installs easily with existing mounting and wiring
🛡️ Fixes Common Issues – Solves random shut-offs, no-heat conditions, or thermal errors
📐 Product Specification
Part Number: WB27X11212
Component Type: Microwave Thermostat / Thermal Switch
Temperature Rating: OEM-equivalent cutoff
Material: Metal housing with bimetal thermal disc
Mounting: Screw-mounted
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Unplug the microwave and discharge high-voltage components before servicing. Microwave repairs involve HIGH VOLTAGE.
Steps:
Disconnect power and remove the microwave cover.
Locate the thermostat mounted near the magnetron or cavity.
Disconnect wires and remove mounting screws.
Install the new XPARTCO WB27X11212 thermostat.
Reconnect wiring, reinstall the cover, and restore power.
Test microwave operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Protect your microwave and restore safe operation — Add to Cart Now for a dependable, budget-friendly repair!
Genuine OEM EAU65058315 Refrigerator Evaporator Fan Motor
The Genuine OEM LG EAU65058315 is a DC evaporator fan motor assembly for select LG and Kenmore refrigerators. The evaporator fan motor circulates cold air through the refrigerator, helping to keep temperatures consistent and prevent frost buildup. When it wears out or fails, the refrigerator may run too warm or too cold, build up frost, or make unusual noise.
This is the original LG part, not an aftermarket equivalent. It is the evaporator fan, not the condenser fan near the compressor. Check your model number before ordering.
Quick Answer
The Genuine OEM EAU65058315 Evaporator Fan Motor replaces the evaporator fan motor on a compatible LG or Kenmore refrigerator when it has failed. Classic symptoms: the refrigerator or freezer is too warm, frost builds up, or the fan makes unusual noise. Other parts can cause the same symptoms, so confirm the fan is the problem first.
Common Problems This Part Fixes
Refrigerator or freezer too warm or too cold
Frost buildup
Unusual noises from the fan area
Moisture or water leaking
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This evaporator fan motor is listed under the following part number:
EAU65058315 replaces EAU63103209, ODM-056F-15, ALG54104, AP6247423, EAP12115088, PD00081425, PS12115088, PS17308826, AP7211789
LG uses many similar fan motor numbers for different models. If your old motor shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This evaporator fan motor is listed for LG, Kenmore and Kenmore Elite bottom-mount refrigerators, including these examples:
LG LFX25974SW, LFCS22520S, LFDS22520S
Kenmore 79570339411, 79579412811, 79579412810
Kenmore Elite 79579049314, 79579044313
Note: The models above are a sample, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM LG part, not an aftermarket equivalent
DC motor assembly
Circulates cold air through the refrigerator
Helps keep temperatures consistent and prevent frost buildup
Product Specifications
Part Number
EAU65058315
OEM Part Number
EAU65058315
Part Type
Refrigerator Evaporator Fan Motor
Condition
Genuine OEM
Manufacturer
LG
Motor Type
DC
Application
Select LG, Kenmore & Kenmore Elite Refrigerators
Installation Notes
⚠️ Unplug Power Before Installing Unplug the refrigerator and move perishable food to a cooler before you begin. Wear work gloves. Follow your model's service guide to reach the evaporator fan, note how the wiring connects, and swap the motor. Reconnect the wiring, restore power, and check that the fan runs quietly.
Frequently Asked Questions
My refrigerator is running warm. Is this the part I need?
It can be, if the evaporator fan has failed. Other parts can cause the same symptoms, so check that the fan isn't blocked by frost and that the fan itself isn't spinning before replacing it.
Is this the evaporator fan or the condenser fan?
This is the evaporator fan motor, which circulates cold air through the refrigerator. The condenser fan motor is a different part, located near the compressor.
Is this an OEM or aftermarket part?
This is a genuine OEM part from LG, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for select LG, Kenmore and Kenmore Elite bottom-mount models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
