Search results for "refrigerator bulbs"

ADQ72910908 Refrigerator Water Filter Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family.  You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness. Cross Reference Number: ADQ72910908, AP6889635, PS12724753, LT500P/PC/PCS

Read more less

Genuine OEM 808602602 Refrigerator Evaporator Fan Motor - Compatible with Frigidaire, Kenmore, Crosley, White-Westinghouse Refrigerators Product Description Restore optimal cooling with the Genuine OEM 808602602 Refrigerator Evaporator Fan Motor. This authentic Frigidaire-manufactured motor, designed for Frigidaire, Kenmore, Crosley, and White-Westinghouse refrigerators, powers the evaporator fan to circulate cold air throughout the refrigerator and freezer compartments. Constructed with durable ABS plastic and metal (120V, 60Hz, 0.1A, 6W), this motor resolves issues like inconsistent temperatures, frost buildup, or excessive noise. Note: Includes one evaporator fan motor with wiring harness. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Replaces part numbers: 808602602, 241854601, 808602601, 4931129, PD00055240, EAP12729077, AP6893151, PS12729077. Compatibility: Compatible with models including but not limited to: Frigidaire: FFSS2625TS2, FFSS2625TS1, FFSS2625TP2, FFSS2625TE1, FFSS2625TE2, FFSS2625TP1, BFHS2611LM0, BFHS2611LM1, BFHS2611LM2, DFHS2313MF0, DFHS2313MF1, FFHS2311LB0, FFHS2311LW0 Kenmore: 25355333607 Crosley: CRSH232PB0, CRSH232PB1, CRSH232PB2, CRSH232PB3, CRSH232PB5, CRSH232PB6, CRSH232PB7A, CRSH232PB8A, CRSH232PB9A, CRSH232PBEA White-Westinghouse: FFSS2625TS2, FFSS2625TS1, FFSS2625TP2, FFSS2625TE1, FFSS2625TE2, FFSS2625TP1 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Frigidaire, Kenmore, Crosley, and White-Westinghouse refrigerator models. 🔥 Specifications: Genuine OEM evaporator fan motor, 120V, 60Hz, 0.1A, 6W, 4-pin connector, ABS plastic/metal construction, 1.25 lbs, corrosion-resistant. 💰 Premium Quality: Authentic Frigidaire part ensures reliability and compatibility, backed by manufacturer standards. 🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves inconsistent temperatures, frost/ice buildup, uneven cooling, or excessive fan noise. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for authentic OEM appliance parts with a 30-day return policy. Ensure consistent cooling in your refrigerator today! Add to cart now for a reliable, OEM-quality fix!

Read more less

XP4P-ROLP-120P15 Refrigerator Starter Relay & Overload Protector Refrigerator Compressor Overload Protector PTC Starter Relay Replaces 1.03.01.01.324J, ZHB35-120P15 BEU: This PTC starter relay is specifically designed for refrigerator compressors. It serves as an overload protector and ensures the proper functioning of your refrigerator compressor. The model ZHB35-120P15 BEU guarantees compatibility with your appliance. Description: Easy to install and replace your old part: This PTC starter relay for refrigerator compressor overload protector is designed for easy installation and replacement of your old part. It saves you time and effort in the installation process. Check well before shipment: Each unit of this refrigerator compressor overload protector PTC starter relay is carefully checked before shipment to  for ensure its quality and functionality.  This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

DA47-00244QCM Refrigerator Defrost Heater 115V, 120W element with defrost thermostat. Fits FF evaporator in Samsung bottom freezers. Replaces Part Numbers:DA47-00244Q, AP5587899, PS4140528.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

4681JB1029D Refrigerator Genuine OEM Condenser Fan Motor Fits Specific LG, Kenmore Refrigerator Models Replaces Part Numbers: 4681JB1029D, EAU61644104, 1267566, AH3523330, EA3523330, OEM17751134, AP4437783, PS3523330. Description: This Condenser Fan Motor is a Genuine part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor The EAU61524007 is a genuine LG OEM evaporator fan motor for LG and select Kenmore refrigerators. This motor circulates air over the evaporator coil and distributes that cooled air into the fresh food and freezer compartments in a balanced way, which is what keeps temperatures even throughout the refrigerator and helps prevent frost from building up on the coil. DC-powered, white in color, with an assembled height of approximately 1 inch. Over time, the motor's bearings can wear out, or general electrical failure can set in from years of continuous cycling. A failing evaporator fan motor produces a wide range of symptoms since it affects both compartments and the defrost system: the refrigerator may not start at all, either compartment may run too warm or too cold, or frost buildup may appear where it shouldn't. Unusual noise from the freezer is another common early sign of a struggling motor. It directly replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349. Quick Answer The EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor fixes LG and select Kenmore refrigerators that won't start, run too warm or too cold in either compartment, or show frost buildup where it shouldn't be. DC motor, white, approx. 1" assembled height. Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, PD00006349. Not the same as the similarly-numbered EAU61524002 motor (DC13V, 0.265A, 3.5W) — confirm you have the exact number before ordering. Common Problems This Part Fixes Refrigerator won't start Refrigerator compartment running too warm Refrigerator compartment running too cold Freezer compartment running too warm Freezer compartment running too cold Frost buildup where it shouldn't be occurring Unusual noise from the freezer indicating a struggling fan motor Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers: EAU61524007, EAU60694510, 3286319, AP5950081, EAP10058947, PS10058947, ALG54568, PD00006349 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select LG refrigerators, and also fits select Kenmore and Kenmore Elite refrigerators built on the LG platform, including model numbers such as LFX31915SW, LFX25992ST, and GRL318LSJP. Note — not the same as EAU61524002: A similarly-numbered part, EAU61524002, is a separate LG evaporator/freezer fan motor rated DC13V, 0.265A, 3.5W, used on different models. Always verify your full model number and match the exact part number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs. Key Features Genuine LG OEM part — factory-specified motor design and airflow performance Circulates air over the evaporator coil and distributes it evenly to both compartments Resolves "won't start," "running too warm or too cold," and "frost buildup" symptoms caused by fan motor failure DC-powered motor White finish, approximately 1" assembled height Direct drop-in replacement matching the original mounting and blade fitment Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349 Compatible with LG and select Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number EAU61524007 Part Type Refrigerator Evaporator Fan Motor Condition Genuine OEM Brand LG Function Circulates air over the evaporator coil to both compartments Power Type DC Color White Assembled Height Approx. 1 in. Quantity 1 fan motor Compatible Brands LG, Kenmore, Kenmore Elite Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new EAU61524007 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My refrigerator won't start at all. Could this really be the fan motor? Yes, this is one of the documented symptoms for this part on LG's own service guidance. Because this motor is tied into the refrigeration and defrost circuit, a failure here can present as the unit not starting at all, in addition to the more expected symptoms like temperature problems or noise. That said, other components can produce a similar no-start symptom, so it's worth confirming this diagnosis if you're not fully certain. Both compartments are running warm, not just one. Does that still point to this motor? Yes. Since this motor is responsible for distributing cooled air to both the fresh food and freezer compartments from the evaporator coil, a failure here can affect both areas simultaneously rather than just one, unlike some other fan motor designs that mainly affect the compartment further from the coil. How do I make sure I'm ordering this exact motor and not a similar one? Check the part number printed directly on your old motor if it's legible, or confirm your refrigerator's full model number against the compatibility list. LG has released similarly-numbered motors, such as EAU61524002, that serve different models and have different electrical specifications, so matching by number is more reliable than matching by general appearance. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, blade fitment, and mounting configuration of the evaporator fan motor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 242278801 Refrigerator Temperature Sensor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling accurately with the XPARTCO 242278801 Refrigerator Temperature Sensor. This high-quality replacement monitors the temperature inside the fresh-food and freezer compartments, sending signals to the control board to regulate cooling. A faulty sensor can cause temperature fluctuations, over-freezing, or warm spots. Replacing it with this reliable XPARTCO part ensures consistent temperature control and energy-efficient performance. Replaces Part Numbers 242278801 PD00029820, EAP8760187, AP5802148, 3016441, PS8760187. Compatibility This replacement temperature sensor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFHS2611LBNA, Electrolux E23BC78IPS3, and Kenmore 253.7041341C. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature accuracy and response rate ❄️ Accurate Cooling Control – Monitors refrigerator temperature for consistent performance 💰 Cost-Effective Fix – Reliable alternative to expensive OEM parts 🛠️ Simple Installation – Plug-in design for fast, easy replacement 🛡️ Fixes Common Issues – Solves warm refrigerator, freezing, or inconsistent cooling problems 📐 Product Specification Part Number: 242278801 Component Type: Refrigerator Temperature Sensor (Thermistor) Material: Plastic housing with thermistor probe and wiring harness Resistance Range: Approximately 2.7 kΩ at 77°F (varies by temperature) Mounting: Direct-fit installation in refrigerator liner or evaporator area Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, wire clip removal tool ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove interior shelves for access. Locate the old temperature sensor, usually near the evaporator or rear wall. Disconnect the sensor’s wiring harness and remove clips. Install the new XPARTCO 242278801 sensor in the same position. Reconnect wiring, reassemble interior parts, and restore power. Allow several hours for the refrigerator to stabilize temperature. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

W10341320 (OE) Refrigerator Water Inlet Valve The W10341320 (OE) is an Original Equipment (OE) replacement dual secondary water inlet valve compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators. This dual-solenoid valve controls water flow to two destinations — the refrigerator's water dispenser and the ice maker. Each solenoid opens independently when the control board calls for water at that destination, and closes the moment the call is dropped. When one or both solenoids fail, you lose water at the dispenser, ice production stops or slows, or the valve begins leaking at its connections. Rated 110/120V, 50/60Hz. Dual solenoid: W1 = 20W, W2 = 35W. Important: this is the SECONDARY valve, not the primary water inlet valve — many Whirlpool side-by-side refrigerators use both, and if your primary valve is working fine but you're still losing water or ice, the secondary valve is the likely culprit. It directly replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032. Common repair for leaks at the valve connections. Installs in about 30 minutes with basic hand tools and novice repair experience. Quick Answer The W10341320 (OE) Refrigerator Water Inlet Valve fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore side-by-side refrigerators with no water through the door, an ice maker that won't make ice or makes too little ice, or leaking at the valve connections. Dual secondary valve — dual solenoid (W1=20W, W2=35W), 110/120V, 50/60Hz. Original Equipment (OE) — same design and performance as the factory part, without the OEM label. Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, K-78032. This is the SECONDARY valve — not the primary water inlet valve (W10238100). Common Problems This Part Fixes No water dispensing through the door — dispenser solenoid failed Ice maker not making ice — ice maker solenoid failed Ice maker dispensing too little ice — solenoid partially failed or restricted Water leaking from the valve or its connections Water dispenser works but ice maker doesn't (or vice versa) — one of the two solenoids has failed Weak or slow water flow at the dispenser Ice cubes coming out hollow, small, or misshapen from insufficient water fill Valve buzzing or humming without opening Primary valve tests fine but the refrigerator still won't dispense water or make ice Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dual secondary water inlet valve directly replaces the following OEM and cross-reference part numbers: W10341320, WPW10341320, AP6019939, AWP49977, PD00004978, PS11753250, EAP11753250, 1937969, K-78032 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: the primary water inlet valve on many of these refrigerators is a different part (W10238100 / WPW10238100) — see the FAQ below on primary vs secondary valves. Compatibility This dual secondary water inlet valve is compatible with select side-by-side refrigerators from the following brands: Whirlpool side-by-side refrigerators — select models (verify with parts diagram) Maytag side-by-side refrigerators — MSB26C6MDE00/DE02, MSB26C6MDH00/DH02, MSB26C6MDM00/DM02, MSB27C2XAB00, MSB27C2XAM00, MSB27C2XAW00, MSC21C6MDM00/DM02, MSC21C6MEZ00, MSC21C6MFZ00, MSS26C6MEZ00, MSS26C6MFB00/FB01, MSS26C6MFW00 and related models Jenn-Air side-by-side refrigerators — JSC23C9EEM00, JSC24C8EAM00/AM01/AM02 and related models KitchenAid side-by-side refrigerators — select models Amana, Magic Chef, Admiral, Norge, Roper side-by-side refrigerators — select Whirlpool-built models Kenmore / Sears side-by-side refrigerators — select Whirlpool-built models Important — This Is the SECONDARY Valve, Not the Primary: Many Whirlpool-platform side-by-side refrigerators use TWO water inlet valves: a primary valve (typically W10238100 / WPW10238100) where the household water line enters the refrigerator, and this dual secondary valve (W10341320) that splits flow between the dispenser and the ice maker. If your primary valve is functioning correctly but you're still not getting water or ice, the secondary valve is the likely culprit. Before ordering, confirm which valve your refrigerator's parts diagram calls for at the position you're replacing. Contact our support team with your model number if you're unsure. Key Features Original Equipment (OE) replacement — produced to the same design and performance standards as the factory part but not sold under the appliance brand's OEM label; provides the same fit and function at a more affordable price Dual secondary water inlet valve — supplies water to both the refrigerator's water dispenser and the ice maker Dual-solenoid design: each solenoid opens independently when the control board calls for water at that destination Electrical specs: 110/120V, 50/60Hz · W1 = 20W, W2 = 35W Resolves "no water through door," "ice maker doesn't make ice," "too little ice," and "leaking at connections" symptoms Common fix for leaks at the valve's water line connections Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators Note: this is the SECONDARY valve — the primary water inlet valve is a different part (W10238100) DIY repair — installs in about 30 minutes with basic hand tools and novice repair experience Product Specifications Part Number W10341320-OE Designation OE (Original Equipment) OEM Part Number WPW10341320 Part Type Refrigerator Dual Secondary Water Inlet Valve Condition OE Replacement Application Side-by-Side Refrigerators (Whirlpool platform) Valve Position SECONDARY (not the primary inlet valve) Solenoids Dual — W1 = 20W, W2 = 35W Voltage 110/120V Frequency 50/60 Hz Supplies Water To Water dispenser + Ice maker Related Part Primary Water Inlet Valve (W10238100 / WPW10238100, sold separately) Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Supply Before Starting — Wear Work Gloves Unplug the refrigerator (or shut off the house circuit breaker for the appliance) and turn off the refrigerator's water supply at the shutoff valve before beginning. Wear work gloves to protect your hands. Safely store any food that could spoil during the repair. Have towels ready — residual water remains in the lines and will spill when disconnected. Pull the refrigerator away from the wall to access the rear. The secondary water inlet valve is typically mounted at the back of the refrigerator, downstream of the primary valve where the household water line enters. Photograph the water line and wire harness connections before disconnecting anything — with two solenoids and multiple water lines, correct reconnection matters. Disconnect the water lines from the valve (use a 1/2" wrench where needed) and catch any residual water with a towel. Disconnect the electrical connectors from both solenoids. Remove the mounting screws holding the valve bracket in place and lift out the old valve. Install the new W10341320 (OE) valve in the same position and orientation, secure the mounting hardware, and reconnect the water lines — tighten fittings snugly without over-torquing. Reconnect the electrical connectors to the correct solenoids, matching your photos. Turn the water supply back on and check every connection for leaks BEFORE pushing the refrigerator back into place. Restore power. Run water through the dispenser for a few minutes to purge air from the lines, and discard the first few batches of ice. Tools needed: Multi-screwdriver, 1/2" wrench, nut driver, towels, work gloves. Frequently Asked Questions What does "OE" mean and how is it different from Genuine OEM? OE (Original Equipment) parts are produced to the same design and performance standards as the original factory part, but they are not sold under the appliance brand's OEM label. They provide the same fit and function as the OEM part at a more affordable price. The W10341320 (OE) water inlet valve matches the electrical specifications (110/120V, 50/60Hz, dual solenoid W1=20W / W2=35W), dual-secondary valve design, connections, and physical fit of the original Whirlpool OEM part, and installs identically. The main difference from a Genuine OEM Whirlpool part is the branding and warranty — the OE version delivers equivalent performance without the OEM price premium. What's the difference between the primary and secondary water inlet valve? Many Whirlpool-platform side-by-side refrigerators use two water inlet valves working in series. The primary valve (typically W10238100 / WPW10238100) is where the household water supply line first enters the refrigerator — it's the main gatekeeper for water entering the appliance. The secondary valve (this W10341320) sits downstream and splits that flow between the water dispenser and the ice maker via its two independent solenoids. Both can fail independently. The key diagnostic: if the primary valve is working correctly (water is reaching the refrigerator) but you're still not getting water at the dispenser or ice from the ice maker, the secondary valve is the likely culprit. Check your model's parts diagram to confirm which valve you need. My water dispenser works but the ice maker doesn't — can this still be the valve? Yes, absolutely. This is a dual-solenoid valve — one solenoid feeds the water dispenser, the other feeds the ice maker. They fail independently. If your dispenser works fine but the ice maker isn't getting water (no ice, or hollow/small cubes), the ice maker solenoid on this valve may have failed while the dispenser solenoid still works. The reverse is also true. Before replacing the valve, also verify the ice maker itself is turned on (check the wire signal arm position) and that the water line to the ice maker isn't frozen or kinked — those produce similar symptoms. Is this a common fix for leaks? Yes — leaks at the water inlet valve's connections are one of the most common reasons this part gets replaced. Over time, the valve body or its fittings can develop cracks or the internal seals can degrade, producing a slow drip that pools behind or under the refrigerator. If you've found water behind your fridge and traced it to the valve area, replacing the valve typically resolves it. When installing the new valve, tighten the water line fittings snugly but don't over-torque them — over-tightening can crack the fitting and create a new leak. Always check all connections for leaks before pushing the refrigerator back against the wall. Should I flush the water lines after installing the new valve? Yes. After the new valve is installed and the water supply is restored, run water through the dispenser for several minutes to purge trapped air from the lines — air pockets cause sputtering and inconsistent flow. Also discard the first two or three batches of ice the ice maker produces, since they may contain air, debris, or residual manufacturing material from the new valve. After that, water and ice should return to normal quality and flow. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

W10861170 Refrigerator Genuine Diffuser Replaces Part Numbers: W10861170, 4459449, OEM23997962, AP5999490, PS11731574, W10633587. Description: This air diffuser is an OEM part for select Whirlpool refrigerators. This air diffuser is responsible for evenly distributing cool air throughout the refrigerator compartment.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WR55X10025 Genuine OEM GE Refrigerator Temperature Sensor The WR55X10025 is a genuine GE OEM temperature sensor, also called a thermistor, for GE, Hotpoint, and Kenmore refrigerators. This sensor measures air temperature inside the refrigerator or freezer compartment and reports it continuously to the main control board, which uses that reading to regulate the cooling cycle. On some models, this same sensor design also serves as the defrost sensor mounted on the evaporator coil, monitoring temperature there to help manage the defrost cycle. Because the control board relies entirely on this sensor's reading to make cooling decisions, a failing or inaccurate sensor can cause the refrigerator to run too cold, too warm, or run for excessively long periods as it tries to correct a temperature it's misreading. On models where it doubles as a defrost sensor, a failure here can also contribute to frost or ice buildup in the freezer. This is a relatively inexpensive part, and it's commonly the actual cause behind symptoms that get mistakenly blamed on the main control board. It directly replaces AP3185407, 914093, AH304103, EA304103, PS304103, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11150, WR55X11151, and WR55X11152. Quick Answer The WR55X10025 Genuine OEM GE Refrigerator Temperature Sensor fixes GE, Hotpoint, and Kenmore refrigerators that run too cold, too warm, run for excessively long periods, or (on models where this sensor doubles as a defrost sensor) show frost or ice buildup in the freezer. A healthy sensor reads approximately 5,000 ohms at 77°F. Replaces AP3185407, 914093, AH304103, EA304103, PS304103, and a wide range of WR50X/WR55X-prefix numbers listed below. This is an inexpensive part that's frequently the actual cause behind symptoms mistakenly blamed on the main control board — worth testing or replacing before assuming a costlier board repair is needed. Common Problems This Part Fixes Refrigerator running too cold Refrigerator running too warm Refrigerator running for excessively long periods Freezer not defrosting properly (on models where this sensor also serves as the defrost sensor) Freezer too cold or showing frost buildup Display temperature reading that doesn't match the actual temperature inside the compartment Inconsistent or fluctuating cooling performance Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers: WR55X10025, 914093, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025-50PK, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11151, WR55X11152, AH304103, EA304103, OEM9556230, AP3185407, EAP304103, AGE29661, PD00000992, PS304103 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select GE, Hotpoint, and Kenmore refrigerators, and is used broadly across most GE side-by-side and French door refrigerator configurations. Note: While this sensor is used across a very broad range of GE refrigerator models, always verify your full model number before ordering, since some models use a different sensor design. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified resistance curve for accurate temperature reporting Measures air temperature and reports it continuously to the main control board Also used as a defrost sensor on the evaporator coil on select models Resolves "too cold," "too warm," "runs too long," and "display reading doesn't match actual temperature" symptoms Direct drop-in replacement — matches the original mounting and wiring Replaces a wide range of WR50X and WR55X-prefix part numbers listed above Compatible with GE, Hotpoint, and Kenmore refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair, typically completed in under an hour Product Specifications Part Number WR55X10025 Part Type Refrigerator Temperature Sensor (Thermistor) Condition Genuine OEM Brand GE Function Measures compartment or evaporator temperature and reports it to the control board Typical Resistance Approx. 5,000 ohms at 77°F Repair Difficulty Easy — typically under 1 hour Quantity 1 temperature sensor Compatible Brands GE, Hotpoint, Kenmore Installation Notes ⚠️ Danger — Authorized Service Part Required For Flammable Refrigerant Systems GE's own service guidance carries an explicit warning for this component: it is a manufacturer-authorized service part intended for use in refrigerator models that use a flammable refrigerant, such as R600a. Using an unauthorized or incorrectly rated service part in a unit that uses a flammable refrigerant could lead to a risk of fire or explosion. Before ordering or installing, confirm your refrigerator's refrigerant type and verify this part is correct for your specific model. If you have any doubt about your refrigerant type or the correct part for your unit, contact our support team with your model number before proceeding, or have a qualified appliance technician perform this repair. ⚠️ Unplug Refrigerator Before Starting — Test With A Multimeter Before Replacing Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before replacing, it's worth testing the old sensor with a multimeter set to ohms — a healthy sensor reads approximately 5,000 ohms at 77°F; a reading well outside that range, or an open circuit, confirms a failed sensor. Locate the sensor, typically mounted on an interior wall of the compartment or clipped to the evaporator coil depending on your model. Photograph the wiring and mounting position before disconnecting anything. Disconnect the sensor's wire connector, remove any mounting clip or bracket, and pull the old sensor free. When positioning the new WR55X10025, make sure it sits in open air away from direct contact with ice buildup areas, since ice touching the sensor can cause it to read colder than the compartment's actual temperature. Reconnect the wire connector and secure the mounting clip. Restore power and monitor the refrigerator over the next 24 hours, comparing the display temperature to an independent thermometer placed in the compartment to confirm accuracy. Tools needed: multimeter, work gloves. Frequently Asked Questions How do I test whether this sensor has actually failed? Use a multimeter set to ohms and test the sensor across its two terminals. A healthy sensor typically reads approximately 5,000 ohms at 77°F room temperature; a reading significantly outside that range, or no reading at all (open circuit), confirms the sensor has failed and should be replaced. My display shows a temperature that doesn't match how cold the fridge actually feels. Could positioning be the issue, not the sensor itself? Yes, this is a documented and somewhat subtle failure mode. If the sensor ends up positioned too close to an area where ice or frost accumulates, the ice's surface temperature can pull the sensor's reading colder than the actual compartment air temperature, causing the display to show a colder number than reality — sometimes off by several degrees. One customer traced exactly this issue to ice buildup near the sensor location and resolved it by ensuring the new sensor sat clear of that ice-prone area during installation. Could my problem actually be the control board instead of this sensor? It's worth testing this sensor first before assuming a control board issue. This is a relatively inexpensive part, and it's commonly the actual root cause behind symptoms that get misdiagnosed as a control board failure, since the board is only ever as accurate as the temperature data it receives. Testing or simply replacing this sensor is a low-cost step worth taking before pursuing a more expensive board repair. Why is there a fire/explosion warning on this part? Some refrigerators use a flammable refrigerant, such as R600a (isobutane), instead of older non-flammable refrigerants. Electrical components near refrigerant lines can be a source of ignition if a leak were ever present, which is why GE requires an authorized, correctly rated service part for these systems rather than a generic substitute. Confirming your model and refrigerant type before ordering is the appropriate precaution. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original resistance curve and mounting configuration of the temperature sensor originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Choice 4389102 Refrigerator Ice Level Control Board Replaces W11629974 The Choice 4389102 is a Choice-tier replacement ice level control board kit for Whirlpool refrigerators, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models with a vertical ice container in the freezer door. This kit uses an infrared beam between an emitter and receiver board to sense the level of ice in the ice bucket, signaling the ice maker to produce more ice when the level drops and to stop when the bucket is full. Weighs approximately 0.23 lbs. Common causes of failure include electrical problems, general wear and tear, or damage from power surges or short circuits. Symptoms of a failing ice level control board include the ice maker not producing ice, the ice maker not stopping production when full, irregular or inconsistent ice production, or error codes related to the ice maker control system. It directly replaces W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489. Quick Answer The Choice 4389102 Refrigerator Ice Level Control Board fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators where the ice maker isn't producing ice, won't stop when full, or produces ice inconsistently. Emitter and receiver board kit — both boards need replacing together. Replaces W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489. Control boards are commonly misdiagnosed — check more commonly defective parts first, and use the LED status light blink pattern to confirm this board is actually at fault before replacing it. What's In The Kit Component Function Emitter Board Sends an infrared beam across the ice bucket opening. Receiver Board Detects whether the beam is blocked by ice, signaling the ice maker to start or stop production. Both boards need to be replaced together — this is a matched emitter/receiver pair, not two independently interchangeable parts. What Is a Choice Part? Choice parts are manufactured by a different supplier than the original appliance manufacturer, offering a dependable, cost-effective alternative to Genuine OEM parts. Unlike our OE parts, which come from the same supplier as the original manufacturer, Choice parts are made by an independent manufacturer to equivalent fit, form, and function specifications. This makes them a smart option when you want a reliable repair at a lower price point than Genuine OEM. Common Problems This Kit Fixes Ice maker not producing ice Ice maker not stopping production when the bucket is full Irregular or inconsistent ice production Error codes related to the ice maker control system Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator ice level control board kit directly replaces the following OEM and cross-reference part numbers: W11629974, W10757851, 4389102, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, W10193666, W10193840, W10290817, W11553040, W11553041, AP7205486, AWP45901, EAP16875489, PD00086112, PS16875489 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This ice level control board kit is compatible with select Whirlpool refrigerators with a vertical ice container in the freezer door, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators built on the Whirlpool platform, including model numbers such as KSRI25FNWH01, ED5FHAXSQ01, KSRG25FVMS05, KSRU25FKWH03, KSRK25XLSS10, JBSS42E22L00, JBSS48E22L00, KBSD702MPS00, KBSD702MSS00, KBSD706MPS00, KBSD708MBS00, KBSD708MPS00, KBSD708MSS00, and Kenmore 106.57979700, 106.51552103, and 106.58169704. Note: This kit is specifically for refrigerators where ice cubes dump directly into an ice bin located in the freezer door. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Choice-tier replacement ice level control board kit — includes matched emitter and receiver boards Resolves "no ice production," "won't stop when full," and "inconsistent ice production" symptoms Uses an infrared beam to detect ice level in the bucket Direct drop-in replacement matching the original mounting and connections Replaces W11629974, 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R, TJ4389102R, W10193666, W10193840, W10290817, W10757851, W11553040, W11553041, AP7205486, AP5956767, AP3137510, PS557945, PS10064583, EAP16875489, PS16875489, AWP45901, and PD00086112 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerators Manufactured by an independent supplier to equivalent fit, form, and function specifications DIY-friendly repair, typically 10 to 20 minutes Product Specifications Part Number 4389102CM OEM Part Number W11629974 Part Type Refrigerator Ice Level Control Board Kit (Emitter & Receiver) Designation Choice Weight Approx. 0.23 lbs Function Uses an infrared beam to sense ice level and signal the ice maker Application Refrigerators with vertical ice container in freezer door Repair Difficulty Easy — 10 to 20 minutes Quantity 1 kit (emitter + receiver board) Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting — Confirm With The LED Test Before Replacing Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves. Before installing this kit, confirm the boards are actually at fault: with the refrigerator still plugged in, check the status light on the control board — it should blink twice, pause, then repeat during normal operation. With the freezer door open, hold down the flapper door on the left side to block the optics beam; the LED should light up and stay on with no blinks. If it continues to blink twice instead, the optics control board has failed. If there's no LED light at all, hold down the freezer light switch — the LED should flash every second while in harvest mode; if it doesn't light up, the board has failed. Once confirmed, unplug the refrigerator, locate the emitter and receiver boards near the ice bucket opening in the freezer door, and disconnect their wiring. Remove the mounting screws or clips securing the old boards and take them out. Install both new boards from this kit in the same positions, reconnect the wiring fully, and secure the mounting hardware. Restore power and monitor ice production over the next day or two to confirm normal operation. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My ice maker stopped making ice. Is this the part I need? Possibly, but control boards are commonly misdiagnosed. Before replacing this board, check more commonly defective parts first — such as the water inlet valve, ice maker assembly itself, or the freezer temperature. If you've ruled those out and the other components are working properly, this control board is a reasonable next step. How can I confirm this board has actually failed before replacing it? Check the LED status light's blink pattern. During normal operation it should blink twice, pause, then repeat. With the freezer door open, hold down the flapper door on the left side to block the beam — the light should turn solid with no blinking. If it keeps blinking twice instead, or doesn't light up at all when it should be in harvest mode (checked by holding the freezer light switch), the board has failed. Do I need to replace just the emitter or receiver, or both? Both. This kit includes a matched emitter and receiver board, and both need to be replaced together as a pair rather than swapping just one side. What does "Choice" mean for this part? Choice parts are manufactured by an independent supplier, different from the appliance's original manufacturer, and built to equivalent fit, form, and function specifications. This gives you a dependable, lower-cost alternative to a Genuine OEM part, distinct from our OE parts, which are sourced from the same supplier as the original manufacturer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Choice Quality Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 2315539 Refrigerator Evaporator Fan Motor Replaces WP2315539 The XPARTCO 2315539 is an aftermarket replacement refrigerator/freezer evaporator fan motor compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Admiral, Estate, Inglis, Ikea, and Gladiator refrigerators. The evaporator fan motor is located in the freezer section and circulates air across the evaporator coils — the cold air generated at the coils is then pushed throughout the freezer and the fresh food compartment. When this motor fails, the most common symptom is excessive noise from the freezer area, and often the refrigerator section won't cool properly even though the freezer remains cold. This motor includes the incorporated wire harness and plug. Rated 115V, 60Hz, with clockwise rotation. It directly replaces WP2315539, WP2315539VP, 2219689, 2225625, W10438708, 1372146, 1518337, AP3996841, AP6007247, ESF-U2B, EAP11740359, PD00021608, PS11740359, and PS1518337. Important: don't forget to transfer the two rubber grommets from your old motor to the new one for proper mounting. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 2315539 Refrigerator Evaporator Fan Motor fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Amana refrigerators with excessive noise from the freezer area, ice buildup in the freezer, or where the fresh food section is warm but the freezer is still cold. Includes incorporated wire harness and plug. 115V, 60Hz, clockwise rotation. Transfer rubber grommets from old motor for mounting. Replaces WP2315539, WP2315539VP, 2219689, 2225625, W10438708, 1372146, AP3996841, AP6007247, ESF-U2B, EAP11740359, PS11740359, PS1518337. Common Problems This Part Fixes Excessive noise from the freezer area — most common symptom of evaporator fan motor failure Loud humming, whining, grinding, or scraping noises during operation Freezer compartment cold but fresh food section warm — cool air not being circulated Heavy ice buildup on the evaporator coils or rear freezer wall Refrigerator running continuously trying to maintain temperature Fan blade not spinning freely or seized when checked by hand Motor failing continuity test with a multimeter Visible damage to the fan motor housing or harness Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WP2315539, 2315539, W10438708, 1372146, 2219689, 2225625, ESF-U2B, AP6007247, AWP47336, EAP11740359, PD00003243, PS11740359. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select refrigerators from the following brands: Whirlpool refrigerators (top-mount, side-by-side, and Gold series — select models) Kenmore / Sears refrigerators (Whirlpool-built — select 106-series and related models) Maytag refrigerators (select models) KitchenAid refrigerators (select models) Amana refrigerators (select models) Roper refrigerators (select models) Crosley refrigerators (select models) Admiral refrigerators (select models) Estate refrigerators (select models) Inglis refrigerators (select models) Ikea refrigerators (select Whirlpool-built models) Gladiator refrigerators (select models) Note: This motor includes an incorporated wire harness. If your old motor has a separate wire harness (not incorporated), confirm the correct part with our support team before ordering. Always verify your model number first. Remember to transfer the two rubber grommets from your old motor to the new one — they're essential for proper mounting. Key Features Refrigerator/freezer evaporator fan motor — circulates cold air from the evaporator coils throughout both the freezer and fresh food compartments Includes incorporated wire harness and plug — direct plug-in installation Rated 115V, 60Hz — correct electrical specifications for compatible Whirlpool-platform refrigerators Clockwise motor rotation Replaces WP2315539, WP2315539VP, 2219689, 2225625, W10438708, 1372146, AP3996841, AP6007247, ESF-U2B, PS11740359, PS1518337, and additional cross-references Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Admiral, Estate, Inglis, Ikea, and Gladiator refrigerators Important: transfer the two rubber grommets from the old motor to the new one for proper mounting Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number 2315539 OEM Part Number WP2315539 Part Type Refrigerator Evaporator Fan Motor (Freezer Section) Condition Aftermarket Replacement Application Refrigerators (Whirlpool platform) Voltage 115V AC Frequency 60 Hz Rotation Clockwise Wire Harness Incorporated wire harness and plug included Mounting Transfer two rubber grommets from old motor Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Admiral, Estate, Inglis, Ikea, Gladiator Installation Notes ⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor is located behind the rear access panel inside the freezer compartment. Remove the freezer shelves and any internal components blocking access to the rear panel. Remove the screws holding the rear access panel to expose the evaporator coils and fan motor (a 1/4" hex driver is commonly needed). Photograph the wire connections and fan blade orientation before disconnecting. Disconnect the wire harness connector from the old motor. Note the orientation of the fan blade on the motor shaft and the position of the two rubber mounting grommets — both must be transferred to the new motor. Remove the mounting screws or release the motor from its bracket, and pull the old motor free. Transfer the rubber grommets and fan blade (if not pre-installed) to the new 2315539 motor in the same orientation. Install the new motor in the same position, reconnect the wire harness, and reinstall the access panel and shelves. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Tools needed: 1/4" hex driver, Phillips screwdriver, flathead screwdriver, work gloves. Frequently Asked Questions My freezer is making loud noise — is it the evaporator fan motor? Yes, this is the most recognizable symptom of a failed evaporator fan motor on Whirlpool-platform refrigerators. When the motor's bearings wear out, it produces loud humming, whining, grinding, or scraping noises during operation. The noise often varies as the fan speed changes or as ice builds up around the fan blade. To confirm, unplug the refrigerator and access the fan behind the rear freezer panel — try turning the blade by hand. If it doesn't spin freely, is stiff, or seizes, the motor bearing has failed and needs replacement. My freezer is cold but my fridge is warm — could this be the cause? Yes — on many Whirlpool-platform refrigerators, the freezer's evaporator fan motor is responsible for circulating cool air from the freezer evaporator into the fresh food compartment as well. When this fan fails, the freezer's own compartment may stay cold because the cold air is generated right there, but the fresh food section warms up because no air is being moved into it. If your fridge is warm while the freezer remains cold, this is a likely cause — especially if you also hear unusual noise from the freezer area or see ice buildup on the evaporator coils. What is the difference between 2315539 and WP2315539? These are the same evaporator fan motor. WP2315539 is the updated Whirlpool OEM part number that superseded the original 2315539. The 2219689, 2225625, W10438708, and ESF-U2B are also cross-references for this same motor across various Whirlpool catalog revisions and production runs. This aftermarket replacement is compatible with all of these numbers. Why do I need to transfer the rubber grommets from the old motor? The two rubber grommets seat between the motor housing and the mounting bracket inside the refrigerator. They isolate the motor from the cabinet to dampen vibration and reduce noise during operation, and they also keep the motor properly positioned in its mount. The new 2315539 typically ships without these grommets — they are reused from the old motor. Remove them carefully from the old motor before discarding it, and slide them onto the new motor in the same positions. Without the grommets, the motor may run noisily or vibrate excessively. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, electrical specifications (115V AC, 60Hz, clockwise rotation), incorporated wire harness, and function of the original WP2315539/2315539 evaporator fan motor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less