AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly
The AEB73764520 is a genuine LG OEM fan grille assembly for LG refrigerators. This grille sits around the evaporator fan, holding and directing the air the fan pushes so cold air is guided evenly throughout the refrigerator and freezer compartments rather than dispersing unevenly right at the fan. It also serves a protective role, shielding the spinning fan blade from accidental contact while still allowing full, unrestricted airflow through its vents.
Made of durable plastic, this grille can crack, warp, or break over time from the cold temperature cycling inside the freezer compartment, or from accidental impact during cleaning or organizing frozen food. A damaged grille typically shows up as uneven cooling or airflow within the compartment, since air isn't being properly guided and distributed, or in cases of significant damage, a fan blade that's no longer adequately shielded. Because parts that look similar can have small but meaningful differences in size and shape, it's important to confirm this exact part number matches your refrigerator before ordering, rather than relying on general appearance.
Quick Answer
The AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly fixes LG refrigerators with a cracked, warped, or broken fan grille causing uneven cooling or airflow, or where the fan is no longer properly shielded. Genuine LG replacement part. Parts that look similar can have small but meaningful size and shape differences — always verify your exact model number before ordering.
Common Problems This Part Fixes
Uneven cooling or airflow within the refrigerator or freezer compartment
Visible cracks, warping, or breakage in the grille around the evaporator fan
Fan blade no longer adequately shielded due to grille damage
Grille that has come loose or won't seat securely in place
Reduced airflow efficiency affecting overall cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AEB73764520, 4952727, ALG53451, AP6873098, EAP12714296, PS12714296, PD00069980.
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This fan grille assembly is compatible with select LG refrigerators, including French door and Door-in-Door smart refrigerator models such as LFXS26973S, LFXS26596S, and LFXS28596S.
Note: Parts that appear similar can have small but important differences in size and shape between LG refrigerator platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified fit and airflow design
Holds and guides air from the evaporator fan for even, consistent cold air distribution
Resolves "uneven cooling," "poor airflow," and "cracked or broken grille" symptoms
Also shields the fan blade from accidental contact
Durable plastic construction
Direct drop-in replacement matching the original mounting
Compatible with select LG French door and Door-in-Door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AEB73764520
Part Type
Refrigerator Fan Grille Assembly
Condition
Genuine OEM
Brand
LG
Location
Around the evaporator fan
Function
Guides evaporator fan airflow and shields the fan blade
Material
Plastic
Quantity
1 fan grille assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves to protect your hands. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator fan area where the grille is mounted. Photograph the grille's orientation and any mounting clips or screws before removing it. Carefully remove the old grille from around the fan, taking care not to contact the fan blade itself. Install the new AEB73764520 grille in the same position, securing any clips or screws to hold it firmly in place. Reassemble the back panel, restore power, and monitor the refrigerator over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My cooling seems uneven, with some areas colder than others. Could this grille be the cause?
Yes, this is possible if the grille is cracked, warped, or has come loose. This grille's job is to guide the evaporator fan's airflow evenly throughout the compartment, so damage or misalignment can cause cold air to concentrate in some areas while other spots don't get adequate circulation.
Why does this part need to match my model so precisely?
Fan grille assemblies that look very similar at a glance can have small differences in size and shape between different LG refrigerator platforms, since the grille has to fit precisely around the specific fan and duct assembly used in your model. Ordering based on a general resemblance rather than confirming your exact model number risks a poor fit that doesn't seat or seal correctly.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original mounting and airflow design of the fan grille assembly originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM 4317943 Refrigerator Ice Maker Kit
The 4317943 is a genuine OEM ice maker assembly kit from Whirlpool for Whirlpool-built refrigerators sold under the Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Roper, and related names. The ice maker is the unit in the freezer that fills with water, freezes it, and ejects the cubes into the ice bin. Over time, contacts corrode and the mechanism wears out, and the refrigerator may make little or no ice, make too much, or leak water from the unit.
This is a complete replacement ice maker, so you swap the whole unit rather than hunting for a failed internal component. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. The kit does not include the shut-off arm. Transfer the arm from your original ice maker, or order the arm for your model.
Quick Answer
The Genuine OEM 4317943 Ice Maker Kit fixes a Whirlpool-built refrigerator that is not making ice, making too little or too much ice, or leaking from the ice maker. Complete ice maker assembly, genuine OEM from Whirlpool, 120 V. Classic symptom: the ice bin stays empty even though the water supply, filter and freezer temperature are all fine.
Common Problems This Part Fixes
Ice maker not making ice
Ice maker producing too little ice, or too much
Ice maker not dispensing ice into the bin
Water leaking from the ice maker
Corroded contacts or a worn-out mechanism
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice maker kit replaces the following part numbers:
4317943, 1857, 4317943R, 4317943VP, 46000978556, 46004211173, 480616, 480617, 482014, 482015, 482016, 482017, 482018, 482019, 482020, 482394, 482433, 482990, 625601, 625603, 625610, 625611, 625622, 625625, 625653, 625656, 625660, 626002, 626201, 626237, 626366, 626461, 626489, 626608, 626609, 626626, 626640, 626670, 626687, 627572, 68972-4, 797991, 8114, 833701, 978552, 978553, 99989730, M626687, W10122496, W10190952, W10281545, W10632400, AP2984633, AH358591, AWP39706, EA358591, PD00002471, PS358591
This one kit replaced many Whirlpool ice maker numbers across decades of models. Match the number on your old ice maker or parts diagram against the list above. Distributor and catalog numbers are not shown here.
Compatibility
This ice maker kit is listed for refrigerators from the Whirlpool family of brands:
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper
Kenmore, including models such as 2537616800, 2537616820, and 2537618100
Note: The model list above is only a sample, since this kit fits a very large number of models. Confirm fit by matching the number on your old ice maker or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. The kit does not include the shut-off arm. If the wiring harness on the kit doesn't work with your refrigerator, you can reuse the harness from your existing ice maker.
Key Features
Genuine OEM Whirlpool ice maker assembly, not an aftermarket equivalent
Complete unit with plastic housing and metal ice tray
120 V, 60 Hz
Replaces corroded contacts and faulty assemblies in one swap
Replaces dozens of earlier Whirlpool ice maker numbers
Easy installation, typically 30–60 minutes with basic hand tools
Product Specifications
Part Number
4317943
OEM Part Number
4317943
Part Type
Refrigerator Ice Maker Assembly Kit
Condition
Genuine OEM
Manufacturer
Whirlpool
Voltage
120 V, 60 Hz
Materials
Plastic Housing, Metal Ice Tray
Not Included
Shut-Off Arm
Application
Select Whirlpool-Family Refrigerators
Installation Notes
⚠️ Unplug Power and Shut Off Water Unplug the refrigerator and turn off the water supply before starting. Empty the ice bin and remove it from the freezer. Following your model's service guide, remove the screws holding the old ice maker to the freezer wall, then disconnect its wiring harness and pull the unit free. Transfer the shut-off arm from the old unit to the new one. If the harness on the new kit doesn't match your refrigerator, reuse the harness from the old ice maker. Mount the new ice maker in the same position, reconnect the harness, and secure the screws. Restore water and power, and allow several hours for the first batch of ice. Tools commonly needed are a nut driver, a flat-blade screwdriver, and a Phillips screwdriver.
Frequently Asked Questions
My refrigerator isn't making ice. Is this the part I need?
It may be, if the water supply is on, the water filter is not clogged, and the freezer is cold enough. If the ice maker's contacts are corroded, it leaks, or it no longer cycles, replacing the whole unit is the simplest fix.
Does the kit include the shut-off arm?
No. Remove the shut-off arm from your original ice maker and fit it on the new one, or order the arm for your model.
The wiring harness on the new ice maker doesn't match mine. What do I do?
You can remove the harness from your existing ice maker and reuse it on the new unit.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for a very wide range of Whirlpool-family refrigerators. Match the number on your old ice maker against the Replaces list, or contact our support team with your model number and we'll confirm fit before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
242252702 Genuine OEM Frigidaire Refrigerator Water Valve
The 242252702 is a genuine Frigidaire OEM triple-solenoid water inlet valve assembly for Frigidaire, Electrolux, Kenmore, Crosley, and White-Westinghouse side-by-side refrigerators. This valve is the central control point where your home's water supply connects to the refrigerator, and it manages water flow to both the ice maker and the door-mounted water dispenser through three separate solenoids housed in one assembly, each opening independently depending on what's being called for.
Rated 120V, 50/60Hz per solenoid (20W maroon, 20W yellow, 35W green — each solenoid's wire is color-coded), this valve has 4 outlets total: one 1/4" tube inlet, three 5/16" tube outlets, and one 1/4" tube outlet. It measures approximately 7-1/8"L x 3-3/4"W x 3-1/4"H and ships as a complete assembly with mounting bracket and installation instructions. This valve directly replaces the older 241734302 design and uses updated quick-connect fittings in place of the older screw-on style. A failing valve typically shows up as the ice maker or dispenser not working, slow water flow, or — notably — an overflowing ice maker caused by the valve not shutting off completely if household water pressure is too low. It directly replaces 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 7241734301, WV2702, 2692163, AP5671757, EAP7784018, PD00000153, PS7784018, and K-76150.
Quick Answer
The 242252702 Genuine OEM Frigidaire Refrigerator Water Valve fixes Frigidaire, Electrolux, Kenmore, Crosley, and White-Westinghouse side-by-side refrigerators where the ice maker or water dispenser isn't working, water flow is slow, or the ice maker is overflowing. Triple-solenoid, 4-outlet valve assembly with bracket. Replaces 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 7241734301, WV2702, 2692163, AP5671757, EAP7784018, PD00000153, PS7784018, K-76150. This valve needs at least 20 psi of household water pressure to shut off completely — if pressure is too low, the valve can leak and cause the ice maker to overflow even when the valve itself is functioning correctly.
Common Problems This Part Fixes
Ice maker has stopped making ice, or is producing less ice than usual
Water dispenser on the refrigerator door isn't working or has slowed down
Ice maker overflowing or leaking
Slow water flow at the dispenser
Water leaking near the valve at the back of the refrigerator
Error code related to the water system displayed on some models
Cracked or physically damaged valve housing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator water valve directly replaces the following OEM and cross-reference part numbers:
242252702, 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 2692163, 7241734301, PD00000153, EAP7784018, AP5671757, AFR15932, PS7784018
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select Frigidaire side-by-side refrigerators, and also fits select Electrolux, Kenmore, Crosley, and White-Westinghouse refrigerators built on the same platform, including model numbers such as:
BFHS2611LM, BFHS2611LM0
BGHS2634KE0, BGHS2634KE1, BGHS2634KP0, BGHS2634KP1, BGHS2644KF0, BGHS2644KF1
FFSS2615TS0, FFSS2615TE4, FFHS2611PFEA, FFHB2750TD5, FRSS26L3AF0
FRS26H5ASB4, FRS26H5ASB5, FRS26H5ASB8, FRS26H5ASBA, FRS26R2AW6, FRS26R4AW5, FRS26R4CB1, FRS26RLECS0, FRS26LF7DS7
FRS6LR5EB3, FRS6LR5EB6, FRS6LR5EM2, FRS6LR5EM8, FRS6R5ESB4
PLHS69EESS2, PLHS69EGSS1, PLHS269ZCB4, PHSC39EGSS0
Crosley CRSE234FB2
Note: This valve's fitting style has been updated to quick-connect fittings, replacing the older screw-on style used on some earlier units — this may cause the appearance to differ slightly from your original part, but it is a correct functional replacement. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Frigidaire OEM part — factory-specified solenoid design and flow-rate calibration
Triple-solenoid assembly supplies water to both the ice maker and door water dispenser
Resolves "ice maker not working," "dispenser not working," "slow water flow," and "ice maker overflowing" symptoms
Color-coded solenoid wiring (maroon, yellow, green) for straightforward reconnection
4 outlets: 1x 1/4" tube inlet, 3x 5/16" tube outlets, 1x 1/4" tube outlet
Updated quick-connect fittings for easier installation than older screw-on designs
Ships complete with mounting bracket and installation instructions
Replaces the full cross-reference list above, including the older 241734302 design
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
242252702
Part Type
Refrigerator Water Inlet Valve (Triple Solenoid)
Condition
Genuine OEM
Brand
Frigidaire
Application
Side-by-Side Refrigerators
Voltage
120V per solenoid
Frequency
50/60 Hz per solenoid
Wattage
20W (maroon), 20W (yellow), 35W (green)
Outlets
1x 1/4" tube inlet, 3x 5/16" tube outlets, 1x 1/4" tube outlet
Dimensions
7-1/8"L x 3-3/4"W x 3-1/4"H
Weight
Approx. 1.08 lbs.
Minimum Water Pressure
20 psi (required to shut off fully)
Kit Contents
Valve assembly, mounting bracket, installation instructions
Color
Gray / Blue / Green / Yellow / Maroon
Material
Plastic / Metal
Quantity
1 valve assembly
Compatible Brands
Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse
Installation Notes
⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Disconnect power at the outlet and shut off the water supply before beginning. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear of the cabinet. Remove the two hex screws securing the old valve. Before disconnecting anything, note or photograph which plastic tube connects to which port on the multi-port valve assembly — with three solenoids and multiple outlets, getting a hose on the wrong port will send water to the wrong place. Disconnect the water supply hose, the electrical connectors (which are color-coded to their matching solenoids on the new valve), and the outlet hoses, then remove the old valve. Install the new 242252702 in the same position with its included mounting bracket, secure it with the hex screws, and reconnect each outlet hose to its correct port exactly as noted. Reconnect the color-coded electrical connectors to their matching solenoid wires. Reattach the water supply hose, tightening securely. While the back of the refrigerator is accessible, it's also a good opportunity to clean the condenser coils and surrounding area. Restore the water supply and check every connection for leaks before restoring power. Push the refrigerator back into place, then test both the ice maker and water dispenser over the following day. Tools needed: hex screwdriver or nut driver, pliers, work gloves.
Frequently Asked Questions
My ice maker is overflowing. Is this the valve?
Possibly, but check your household water pressure first. This valve requires a minimum of 20 psi to shut off fully — if your home's water pressure is below that, the valve may not close completely even though it's functioning correctly, letting water leak through and overflow the ice maker. If your water pressure tests below 20 psi, that's the underlying cause rather than a defective valve, and addressing the pressure issue (or installing a pressure-boosting solution) is the correct fix.
The new valve looks different from my old one. Is that normal?
Yes. This valve has been updated to use quick-connect fittings in place of the older screw-on style used on earlier units, so the connection points may look different from what you're used to. It's still a correct, direct functional replacement — the new fittings just make installation somewhat easier.
How do I know which hose goes where? This valve has multiple outlets.
Note or photograph the hose routing on your old valve before disconnecting anything — with three solenoids and four total outlets, it's easy to reverse a connection if you're not careful. The electrical connectors are color-coded (maroon, yellow, green) to help you match them to the correct solenoid on the new valve, which makes the wiring side more foolproof than the hose routing.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original triple-solenoid design, wattage per solenoid, and outlet configuration of the water valve originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
2 Pack - XPARTCO XPIBE1740 Microwave Light Bulb 40W Replaces 8206232A, WB25X10030
The XPARTCO XPIBE1740 is an aftermarket replacement 40-watt T8 appliance light bulb compatible with a wide range of microwaves, range hoods, refrigerators, ovens, and other kitchen appliances from GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, and more. It uses the standard E17 intermediate screw base found on most over-the-range and built-in microwave interior lights, range hood lights, and select appliance bulb sockets. With a clear T8 glass envelope, warm white 2800K color temperature, and 280-lumen output, it matches the brightness and look of the original OEM bulbs it replaces.
Specifications: 40W, 125V (AC 110-130V/60Hz), E17 intermediate screw base, T8 shape (1" diameter × 2-3/8" length), 280 lumens, warm white (~2800K), dimmable (compatible with microwave HIGH/LOW light settings), 1000-hour rated life, working temperature High Temp Resistance 300℃. It directly replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, 0053437, 05200136, 05200137, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 261201500480, 3015548, 6912W1Z004B, AP5809052, PS2376034, and PS8767095. Installs in under 5 minutes — no tools required for the bulb itself.
Quick Answer
The XPARTCO XPIBE1740 Microwave Light Bulb (40W) replaces burned-out interior microwave lights, range hood lights, and select appliance bulbs across GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, and Hotpoint. T8 shape, 40W, 125V, E17 intermediate screw base. 1" diameter × 2-3/8" length. 280 lumens warm white (~2800K). Dimmable. 1000-hour life. Replaces 8206232A, 8206232, 8189961, 8204855, 8205422, 1890433, AP4512653, R0712011, W10321375, W10598935, WB36X10003, WB25X10029, WB25X10030, WB25X10030-24PK, 6912W1Z004B, AP5809052, PS2376034, PS8767095. Make sure your appliance uses an E17 intermediate base — not E26 standard, E12 candelabra, or E14 European.
Common Problems This Part Fixes
Microwave interior light not working — bulb burned out
Range hood light bulb burned out — under-cabinet area no longer illuminates when cooking
Over-the-range microwave under-cabinet light not working
Bulb flickering or dimming inconsistently — filament starting to fail
Bulb visibly burned out, broken, or rattling when shaken (broken filament)
Microwave light works only intermittently — bulb on the verge of failure
Replacement after long service life — most appliance bulbs last about 2,000 hours
Replaces Part Numbers
This 40W appliance light bulb directly replaces the following OEM and cross-reference part numbers from multiple brands:
8206232A, 8206443, 8183993, 0053437, 05200136, 05200137, 14209237, 14210453, 14210811, 14218311, 14218312, 14218318, 1890433, 2635-0004, 2635-0005, 2665-0003, 4158344, 4158365, 4158432, 4164062, 4166665, 4174608, 4338831, 4359625, 4393681, 53001372, 53422, 53437, 56001071, 56001089, 57001073, 7-47000, 7-47001, 747000, 747001, 8189961, 8204855, 8205422, 8205586, 8206232, R0712013, R0712015, R0713503, R9900310, W10321375, W10598935, Y0053422, Y0053437, Y05200136, Y05200137, Y747000, Y747001, AWP39609, PD00003046, AH2376034, EA2376034, AP4512653, PS2376034, WB25X10030, 261201500480, 3015548, AGE22225 PD00034740, AP5809052, PS8767095, 26QBP4093.
If your bulb part number isn't listed above, check that the base is E17 intermediate and the bulb is 40W — most appliance bulbs in this category are interchangeable. Contact our support team if you need confirmation.
Compatibility
This 40W E17 appliance light bulb is compatible with a wide range of microwaves, range hoods, refrigerators, and ovens using E17 intermediate base sockets, including:
GE over-the-range and countertop microwaves (interior lights)
GE Profile, Café, and Monogram microwaves and range hoods
Whirlpool microwaves and range hoods (over-the-range models)
KitchenAid microwaves (built-in and over-the-range)
Maytag microwaves (select models)
Amana microwaves (select models)
LG over-the-range microwaves
Frigidaire microwaves and range hoods (select models)
Kenmore / Sears microwaves (multi-brand-built models)
Hotpoint microwaves and range hoods
Corningware microwaves (select models)
Also fits select refrigerator interior light sockets, oven lights, and lava lamps using the same E17 base
Important — Check Your Base Type: This bulb uses an E17 intermediate screw base. It will NOT fit appliances designed for E26 (standard household), E12 (candelabra), or E14 (European) bases. The E17 base is the most common base for over-the-range microwaves and range hoods, but check your old bulb or appliance manual to confirm before ordering. Some newer LG microwaves use a 30W bulb instead of 40W — verify your wattage requirement as well.
Key Features
40-watt T8 appliance incandescent bulb — replaces burned-out interior lights in microwaves, range hoods, refrigerators, and select ovens
Standard E17 intermediate screw base — fits the most common appliance bulb socket
T8 shape: 1" (25mm) diameter × 2-3/8" (62mm) length — matches OEM bulb dimensions for clear cover fit
125V (works on AC 110-130V / 60Hz household power)
400 lumens of warm white light (~2800K) — matches the brightness and color of original incandescent OEM bulbs
Dimmable — compatible with microwave HIGH/LOW light settings without flicker
1000-hour rated lifetime — standard for appliance incandescent bulbs
Working temperature range: High Temp Resistance 300℃. — suitable for microwave and range hood heat environments
Replaces 8206232A, 1890433, AP4512653, WB25X10030, WB36X10003, W10321375, W10598935, 6912W1Z004B, and many additional cross-references
Multi-brand cross-compatibility: GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY replacement — installs in under 5 minutes
Product Specifications
Part Number
XPIBE1740
Common OEM Replacements
8206232A, WB25X10030, WB36X10003, 6912W1Z004B
Part Type
Appliance Light Bulb (Incandescent)
Condition
Aftermarket Replacement
Application
Microwave, Range Hood, Refrigerator, Oven, Appliance Lights
Wattage
40W
Voltage
125V (operates AC 110-130V / 60Hz)
Base Type
E17 Intermediate Screw Base
Bulb Shape
T8
Dimensions
1" (25mm) D x 2-3/8" (62mm) L
Brightness
280 lumens
Color Temperature
Warm White (~2800K)
Cover
Clear glass
Dimmable
Yes — compatible with HIGH/LOW microwave settings
Lifetime
over 2,000+
Working Temperature
High Temp Resistance 300℃.
Compatible Brands
GE, Whirlpool, KitchenAid, Maytag, Amana, LG, Frigidaire, Kenmore, Hotpoint, Corningware
Installation Notes
⚠️ Let the Bulb Cool Completely Before Touching — Unplug Microwave Before replacing the bulb, unplug the microwave (or disconnect power at the breaker for hardwired range hoods) and allow the old bulb to cool completely — incandescent appliance bulbs run very hot, and the glass can stay hot for several minutes after the light is turned off. For an over-the-range microwave's interior light, the bulb is typically accessed through a small panel or by removing a screw-on cover inside the microwave cavity. For under-cabinet/exterior lights, access the bulb by removing the protective cover or vent grille on the bottom of the microwave or range hood. Unscrew the old bulb counterclockwise and dispose of it safely. Screw in the new XPIBE1740 bulb clockwise — hand-tight only, do not over-tighten. Avoid touching the glass envelope of the new bulb with bare fingers; skin oils on the glass can shorten bulb life. If you must touch the glass, wipe it down with a clean cloth before powering the appliance back on. Replace the cover, restore power, and confirm the light works. Tools needed: none for most models, or a small Phillips screwdriver if a panel/cover must be removed.
Frequently Asked Questions
How do I know if I need an E17, E26, or E12 base bulb?
The "E" number refers to the screw base diameter in millimeters. E17 (intermediate) is 17mm — the most common size for over-the-range microwave interior lights, range hood lights, and many appliance lights. E26 (medium/standard) is 26mm — typical household light bulbs (do NOT fit appliance sockets). E12 (candelabra) is 12mm — used for chandelier and decorative bulbs. E14 (European intermediate) is 14mm — common in Europe but rare in U.S. appliances. The XPIBE1740 is an E17 intermediate base. If your old bulb is noticeably smaller or larger than what you're holding, it's the wrong base — confirm by comparing dimensions or checking your appliance manual before ordering.
Can I use an LED bulb instead of this incandescent one?
In many appliances, yes — LED appliance bulbs with E17 intermediate bases are available and use significantly less power for similar brightness. However, LED bulbs sometimes have compatibility issues with the dimming/HIGH-LOW settings on microwaves, can flicker, or may not work with the appliance's lighting control circuit. The XPIBE1740 incandescent bulb is fully dimmable and a guaranteed direct match to the original appliance bulb's behavior. If you prefer LED for energy savings, confirm the LED is rated for appliance use, has an E17 base, and is dimmable for microwave applications before substituting.
My LG microwave's bulb says 30W — does this 40W bulb fit?
Physically, yes — both the 30W and 40W bulbs use the same E17 intermediate base and similar T8 shape. However, some LG microwave models specifically call for a 30W bulb (such as the 6912W1Z004B variant). Using a 40W bulb in a socket rated for 30W may cause the bulb to run hotter than designed, shortening its life or the surrounding socket components' life. Check your LG microwave's manual or the marking on the old bulb — if it specifies 30W, use a 30W bulb. The XPIBE1740 is 40W, suitable for the majority of microwaves that specify 40W bulbs.
Why do appliance bulbs burn out faster than regular household bulbs?
Appliance bulbs operate in harsher environments than typical household bulbs — high temperatures (microwaves and range hoods can hit 480°F nearby), heavy vibration from cooking appliances, repeated rapid on-off cycling, and frequent thermal shock from cooking steam. Even though they're rated for 1,000 hours of operation, real-world life in an appliance is often shorter than the same incandescent bulb in a household lamp. Buying multi-packs and replacing when one burns out is a common approach. Always allow the appliance to cool before swapping the bulb, and don't touch the new glass with bare fingers to maximize service life.
Is this an OEM or aftermarket part?
This is an aftermarket replacement bulb built to OEM-equivalent quality standards. It is not a branded GE, Whirlpool, or LG OEM bulb, but is manufactured to match the dimensions (T8, 1" × 2-3/8"), electrical specifications (40W, 125V, E17 base), brightness (400 lumens, warm white), and dimmable performance of the original appliance bulbs it replaces. Bulb spec compatibility (not brand) is what determines fit, so a properly specified aftermarket bulb performs identically to the OEM.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine Whirlpool OEM
Whirlpool WPW10184813 Refrigerator Genuine OEM Ice Dispenser Motor
Genuine OEM ice-dispenser door motor for select Whirlpool-built refrigerators.
Product Overview
The Whirlpool WPW10184813 Refrigerator Ice Dispenser Door Motor is a Genuine Whirlpool OEM replacement part. It opens and closes the ice chute door during dispenser operation so ice can pass through the chute and the door can reseal afterward.
A failed motor can cause the dispenser door to remain stuck open or closed, prevent ice from dispensing correctly, or allow warm room air to enter the chute area.
Quick Answer
WPW10184813 is the Genuine Whirlpool OEM ice-dispenser door motor that replaces W10184813 and 2305262. Verify the complete refrigerator model number before purchase.
Common Problems This Part May Fix
Ice dispenser door will not open
Ice chute door will not close
Ice maker makes ice but ice will not dispense
Chute door sticks or operates intermittently
Warm air enters around the dispenser chute
Frost or moisture develops around the dispenser opening
Replaces and Cross-References
WPW10184813, 1489085, 2305262, AP6016508, EAP11749796, W10184813, AWP49407, OEM18049533, PD00006398, PS11749796
Cross-reference numbers are provided for identification. Always verify compatibility by complete refrigerator model number.
Compatibility
Used on select Whirlpool-built refrigerators sold under Whirlpool, KitchenAid, JennAir, Maytag, and Kenmore brand names. Compatible model examples include:
GI7FVCXWY00
KSCS25FTMS02
KSRS25FTSS01
KSCS23FVMS02
KSRS25RSBT01
KSCS25FVMS01
KSCS25FTSS00
GC3NHAXVA00
106.56702500
Important: This is only a partial model list. Confirm the complete model number from the refrigerator identification label before ordering.
Key Features
Genuine Whirlpool OEM part
Operates the ice dispenser chute door
Replaces W10184813 and 2305262
For select Whirlpool-built side-by-side and French-door refrigerators
Helps restore proper dispenser-door opening and closing
Product Specifications
Manufacturer Part Number
WPW10184813
Brand
Whirlpool
Part Type
Refrigerator Ice Dispenser Door Motor
Condition
New
Quality
Genuine OEM
Application
Ice Dispenser Chute Door
Package Quantity
1 Motor
Installation Notes
Disconnect refrigerator power before service.
Remove the dispenser trim and front components according to the appliance service procedure.
Photograph connector and mechanical linkage positions before disassembly.
Inspect the chute door, hinge, spring, and linkage for binding or damage before replacing the motor.
Transfer or reconnect the wiring and linkage exactly as originally installed.
Reassemble all dispenser parts and verify the chute door opens and fully closes before returning the refrigerator to service.
Diagnostic tip: A dispenser that will not release ice can also be caused by an actuator, dispenser switch, control board, auger motor, frozen chute, or mechanical obstruction. Diagnose the dispenser system before replacing parts.
Frequently Asked Questions
Is WPW10184813 a Genuine Whirlpool OEM part?
Yes. WPW10184813 is a Genuine Whirlpool OEM ice-dispenser door motor.
Does it replace W10184813?
Yes. Whirlpool lists WPW10184813 as the replacement for W10184813 and 2305262.
What does this motor do?
It opens and closes the dispenser chute door so ice can pass through the chute and the opening can reseal after dispensing.
Will it fit every Whirlpool refrigerator?
No. Verify the complete refrigerator model number before ordering because dispenser designs vary by model and production revision.
Shop With Confidence
Genuine Whirlpool OEM replacement part. Verify your complete refrigerator model and original part number before ordering.
Genuine OEMIce Dispenser MotorCompatibility SupportFast U.S. Shipping
ADQ74793504 Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Cross Reference Number: AGF80232402, ADQ74793504 , LT1000P/PC/PCS, AP6985655, PS12724832
XPARTCO WR60X26866 Refrigerator Evaporator Fan Motor
The XPARTCO WR60X26866 is an aftermarket replacement axial evaporator fan motor for the fresh food section of select GE French door refrigerators, including the CFE28, CFE29, CWE23, CYE22, CYE23, DFE28, DFE29, GFD28, GFE26, GFE27, GFE28, GFE29, GFS26, GFS28, GNE26, GNE29, GYE22, GYS22, PFD28, PFE28, PFE29, PWE23, PYD22, PYE22, PYE23, and ZWE23 series. The evaporator fan motor pulls air through the evaporator coils to remove heat from the circulating air inside the refrigerator. Without a functioning evaporator fan, the refrigerator compartment cannot maintain its target temperature even when the compressor and condenser are running normally — the cold air generated at the evaporator simply isn't being circulated to the food storage areas.
The WR60X26866 is a DC motor rated at 13.6V DC, 0.16A, with a fan housing measuring 3-4/7"L x 2"W x 3-1/8"H, plus a multi-color wire harness and plug approximately 11-1/2" long. It includes the axial fan blade and harness as a complete assembly. It directly replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, and PS12172983. Important: if your refrigerator was built between May 2014 and March 2015 with serial range FF–HD, the unit's software must be updated before installing this fan motor — see FAQ below. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO WR60X26866 Refrigerator Evaporator Fan Motor fixes GE French door refrigerators where the fridge isn't cooling but the freezer is cold, the evaporator coils are frosted over, the ice maker isn't working due to insufficient cooling, or there's loud humming or grinding from the freezer area. Axial fan motor, 13.6V DC, 0.16A. Fan housing: 3-4/7"L x 2"W x 3-1/8"H; harness ~11-1/2"L. Replaces WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, WR02X13733, 239D1412P006, V80E14MS2A3-57A611, 8817V-W1, 4546026, AP5985039, AP6278228, EAP12172983, PD00038765, PS11721915, PS12172983. Note: May 2014 – Mar 2015 build refrigerators (serial range FF–HD) require a software update before installation.
Common Problems This Part Fixes
Refrigerator not cooling properly while the freezer remains cold — classic evaporator fan failure
Freezer cold but fridge warm — fresh food compartment air not being circulated
Frosty or frozen evaporator coils due to insufficient air circulation
Ice maker failure caused by inadequate cooling in the compartment
Loud humming, grinding, or buzzing noise from the freezer or fresh food compartment
Refrigerator running continuously without reaching set temperature
Fan blade not spinning freely or seized when checked by hand
Multimeter shows no continuity through the motor windings
Replaces Part Numbers
This evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE French door refrigerators, including:
GE refrigerators — CFE28, CFE29, CWE23, CYE22, CYE23 series (CFE28TP2MBS1, CFE28USHNSS, CWE23SP2MBS1, CYE22TP2MBS1 and related)
GE refrigerators — DFE28, DFE29 series (DFE28JELCDS and related)
GE refrigerators — GFD28, GFE26, GFE27, GFE28, GFE29 series (GFD28GBLBTS, GFE26GGHEBB and related)
GE refrigerators — GFS26, GFS28, GNE26, GNE29 series
GE refrigerators — GYE22, GYS22 series (GYE22HMKEES and related)
GE refrigerators — PFD28, PFE28, PFE29 series (PFE28KELFDS and related)
GE refrigerators — PWE23 series (PWE23KSKDSS and related)
GE refrigerators — PYD22, PYE22, PYE23 series (PYE22KSKBSS and related)
GE refrigerators — ZWE23 series and select related Café and Profile French door models
Important — Software Update Requirement: If your GE refrigerator was manufactured between May 2014 and March 2015 with a serial number in the range FF–HD, the refrigerator's control software must be updated by GE factory service (or via Software Update Module WR98R882802) before installing this fan motor. Installing the new motor without the software update on these affected units may result in improper performance. Check your refrigerator's serial number plate before ordering.
Key Features
Axial evaporator fan motor for the fresh food section of GE French door refrigerators
Pulls air through the evaporator coils to remove heat and circulate cold air through the refrigerator compartment
DC motor — rated 13.6V DC, 0.16A — runs on DC voltage from the refrigerator control board
Includes the axial fan blade and pre-attached multi-color wire harness with plug
Fan housing dimensions: 3-4/7"L x 2"W x 3-1/8"H; harness and plug approximately 11-1/2" long
Quiet operation — engineered to minimize hum and vibration in the refrigerator cabinet
Plastic and metal construction, black housing with multi-color harness
Replaces an extensive list of GE part numbers including WR60X26033, WR60X26030, WR60X24303, WR60X10341, WR60X10356, WR60X10357, and additional cross-references
Compatible with GE, GE Café, and GE Profile French door refrigerators in the CFE, CWE, CYE, DFE, GFD, GFE, GFS, GNE, GYE, GYS, PFD, PFE, PWE, PYD, PYE, and ZWE series
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 20–30 minutes with basic hand tools
Product Specifications
Part Number
WR60X26866
Part Type
Refrigerator Evaporator Fan Motor (Fresh Food / Axial)
Condition
Aftermarket Replacement
Application
GE French Door Refrigerators
Voltage
13.6V DC
Amperage
0.16A
Fan Type
Axial
Fan Housing Dimensions
3-4/7"L x 2"W x 3-1/8"H
Harness Length
Approximately 11-1/2 inches
Color
Black housing with multi-color harness
Material
Plastic / Metal
Includes
Axial fan motor assembly with harness
Software Update Required
For May 2014 – Mar 2015 builds (serial range FF–HD) — use WR98R882802
Compatible Brands
GE, GE Café, GE Profile
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The evaporator fan motor for the fresh food section is mounted on the back wall of the fresh food (refrigerator) compartment, behind an access panel. Take a photo of the existing fan position and wire harness routing before disconnecting. Remove the shelves and any internal components blocking access to the back wall, then remove the screws holding the rear access panel in place. Disconnect the fan motor's wire harness connector and remove the mounting screws securing the old motor. Note the fan blade orientation on the motor shaft. Install the new WR60X26866 motor assembly in the same position with the blade facing the same direction, reconnect the wiring harness, and reinstall the mounting screws and access panel. Replace the shelves and other internal components, restore power, and confirm the fan spins and the refrigerator cools properly. Allow several hours for the refrigerator to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
My fridge is warm but my freezer is cold — is the evaporator fan motor the problem?
Yes — this is one of the most recognizable symptoms of evaporator fan motor failure on GE French door refrigerators with a separate fresh food evaporator. The freezer side has its own cooling circuit and remains cold, while the fresh food side relies on this fan to circulate air across its evaporator coils. When the fan fails, the freezer continues working but the fresh food compartment loses its cold air supply, warming up while the freezer stays at temperature. If you also notice frost building up on the evaporator coils behind the back panel of the fresh food compartment, the fan failure is confirmed.
What is the software update requirement for May 2014 – March 2015 refrigerators?
GE issued a software update for certain refrigerators manufactured between May 2014 and March 2015 (serial range FF–HD) before they could properly support newer revisions of the WR60X26866 evaporator fan motor. If your refrigerator falls in this date and serial range, the control software must be updated before installing this fan motor — either by GE factory service or by using the Software Update Module part WR98R882802. Installing the new fan on an unupdated unit can result in improper performance. Check the serial number plate inside your refrigerator (typically on the left side wall) to confirm whether your unit is affected. Refrigerators built outside this range do not require the update.
How do I test if the evaporator fan motor has failed?
Unplug the refrigerator, then access the fan behind the rear panel of the fresh food compartment. First, try turning the fan blade by hand — if it doesn't spin freely, is stiff, or seizes, the motor bearing has failed. Next, listen during normal operation — if the motor is unusually noisy or makes a grinding sound, the bearings are worn even if it still spins. Finally, with the unit unplugged and the motor disconnected, use a multimeter on the motor windings to check for continuity. If the windings show no continuity, the motor has failed electrically. Also check for approximately 11–14V DC at the connector when the refrigerator is running — if voltage is present but the motor doesn't spin, the motor has failed.
My fridge has two evaporator fans — which one does this replace?
Some GE French door refrigerators have separate evaporator fan motors for the freezer and the fresh food sections. The WR60X26866 is the fresh food evaporator fan motor — it's the axial fan located behind the rear panel of the fresh food compartment, not in the freezer. If your symptom is "freezer cold, fridge warm," this is the correct part. If your symptom is "freezer warm" or "ice maker not making ice but fridge is fine," the freezer evaporator fan motor (a different part number) is more likely the cause. Confirm which compartment has the cooling problem before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions, fan housing, electrical specifications, and pre-attached wire harness configuration of the original WR60X26866 evaporator fan motor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
EAU63923601 Refrigerator Condenser Fan Motor - Compatible with LG, Haier, Kenmore/Sears Refrigerators
Product Description
Keep your refrigerator cool and efficient with the replacement EAU63923601 Refrigerator Condenser Fan Motor from Parts-O-Matic. This high-quality motor, designed for LG, Haier, and Kenmore/Sears refrigerators, circulates air across the condenser coil to dissipate heat, ensuring optimal cooling performance. Made with durable ABS plastic and metal components (DC 12V, 1A, 4-wire 4-pin), this motor addresses issues like overheating, noisy operation, poor cooling, or fan failure.
Note: Includes one condenser fan motor. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement.
Replaces part numbers: EAU63923601, ODM-001F-4A, LFXS26596S, 4877337, AP6317195, PS12383669, EAP12383669, PD00046601, EAU63923604
Compatibility:
Compatible with models including but not limited to:
LG: LFXS28968S, LFXS28968S/00, LMXS28626S, LMXS28626S/00, LFXS26596S, LRMDS3006S, LMWS27626S, LRFVS3006D
Haier: Select models requiring EAU63923601 or compatible condenser fan motors
Kenmore/Sears: Select models requiring EAU63923601 or compatible condenser fan motors
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Haier, and Kenmore/Sears refrigerator models.
🔥 Specifications: replacement condenser fan motor, DC 12V, 1A, 4-wire 4-pin connector, shaft length 46mm, shaft diameter 3mm, line length 72cm (28.34in), ABS plastic/metal construction, 3.15" x 3.15" x 2.76", 5.29 oz.
💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves issues like refrigerator overheating, excessive noise, poor cooling, or fan failure.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Restore your refrigerator’s cooling efficiency today!
Add to cart now for a budget-friendly fix!
XPARTCO DA31-00334C Refrigerator Evaporator Fan Motor
The XPARTCO DA31-00334C is an aftermarket replacement evaporator fan motor for Samsung bottom-mount and side-by-side refrigerators. This small brushless DC (BLDC) motor sits behind the freezer's rear panel, directly in front of the evaporator coil, and its job is to pull cold air off that coil and push it through the duct system into both the freezer and fresh food compartments. Without it circulating air, the coil itself keeps getting cold, but that cold air never reaches your food — the freezer may still work reasonably well since it sits closer to the coil, while the fresh food side drifts warmer and warmer since it depends entirely on ducted airflow from the back.
Rated at 12V DC, 2.5W, 0.12A, running at approximately 1,870 RPM. As a brushless design, this motor has no physical brushes to wear out, so failure typically comes from a worn bearing that lets the blade wobble or bind, a winding that has burned out electrically, or a blade that has become jammed by a chunk of built-up frost or freezer debris. It directly replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, and EAP12590897. Also compatible with select Kenmore refrigerators built on the Samsung platform.
Quick Answer
The XPARTCO DA31-00334C Refrigerator Evaporator Fan Motor fixes Samsung bottom-mount and side-by-side refrigerators with uneven cooling, a fresh food compartment that's warmer than it should be, frost or ice buildup at the back or bottom of the freezer, or a grinding/buzzing noise from inside the cabinet. Brushless DC (BLDC) motor, 12V DC, 2.5W, 0.12A, ~1,870 RPM. Replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, EAP12590897. Verify your model number before ordering — Samsung uses several different evaporator fan motors, and this is not the same part as our DA81-06013A listing.
Common Problems This Part Fixes
Fresh food compartment running warmer than the freezer, or warmer than it used to
Uneven temperatures between shelves or between the fresh food and freezer sides
Frost or ice buildup accumulating at the back panel or bottom of the freezer
Grinding, buzzing, or rattling noise coming from inside the refrigerator cabinet
Noise that stops when the freezer door is opened and starts again once it's closed
Freezer holding temperature reasonably well while the fresh food side drifts warm
Fan blade that doesn't spin freely, or spins with noticeable wobble, when checked by hand
Refrigerator running constantly as the compressor tries to compensate for poor air circulation
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
DA31-00334C, DA31-00287B, DA96-00968A, 12035GE-12M-YT, 12V DC 0.26A, ARES2120RA, Model # 12035GE-12M-YT, AP6803162, ASM1061854, EAP12590897, PD00075168, PS12590897.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select Samsung bottom-mount and side-by-side refrigerators, and also fits select Kenmore refrigerators built on the Samsung platform.
Note — not the same motor as DA81-06013A: Samsung uses several different evaporator fan motor designs across its refrigerator lineup. The DA31-00334C is a distinct part from our DA81-06013A listing, which is built for a different model family and has its own connector and mounting configuration. Fitting the wrong motor can result in a connector that won't mate with your wiring harness or a fan blade that doesn't clear the housing correctly. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Brushless DC (BLDC) evaporator fan motor — no brushes to wear out over time
Circulates cold air from the evaporator coil throughout the freezer and fresh food compartments
Resolves "fresh food too warm," "uneven cooling," "frost buildup," and "grinding or buzzing noise" symptoms caused by fan motor failure
Rated 12V DC, 2.5W, 0.12A, approximately 1,870 RPM
Direct drop-in replacement matching the original mounting bracket and blade fitment
Replaces DA31-00287B, DA31-00334A, DA31-00305A, DA96-00968A, AP6803162, 3954921, AP5948644, PS9494284, EAP9494284, PS12590897, and EAP12590897
Compatible with select Samsung and Kenmore (Samsung-platform) refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPDA31-00334C
OEM Part Number
DA31-00334C
Part Type
Refrigerator Evaporator Fan Motor
Condition
Aftermarket Replacement
Brand
Samsung
Motor Type
Brushless DC (BLDC)
Voltage
12V DC
Wattage
2.5 W
Amperage
0.12 A
Speed
~1,870 RPM
Application
Bottom-Mount and Side-by-Side Refrigerators
Quantity
1 fan motor
Compatible Brands
Samsung, select Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Let The Freezer Thaw If Iced Over Disconnect power at the outlet before beginning, and remove all food from the freezer to a cooler for the duration of the repair. Wear work gloves. Access is through the freezer's rear interior panel: remove the shelving and bins as needed, then remove the screws securing the back panel and set it aside to expose the evaporator coil and fan assembly. If you see significant frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours (or run a manual defrost) before continuing, since ice can be masking the actual point of failure and can also make the old motor difficult to remove cleanly. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free — on many models the blade is a separate piece that pulls off the motor shaft. Transfer the fan blade to the new motor if it isn't included, or install the new blade supplied with this motor, matching the original orientation. Mount the new DA31-00334C in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
My freezer seems fine but the fresh food section is warm. Is this really the fan motor?
Yes, this is a very common and telling symptom pattern. The freezer compartment sits right next to the evaporator coil and can stay reasonably cold through simple proximity even with poor air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, while the freezer may seem to lag only slightly behind.
I hear a grinding or buzzing noise that stops when I open the freezer door. What does that mean?
This is a classic symptom of a worn fan motor bearing or a blade that's catching on built-up frost. Opening the door often triggers the refrigerator's internal light switch or door sensor, which can cut power to the fan momentarily — the noise stops because the fan stops spinning, then resumes once the door closes and the fan restarts. If you can see or reach the fan blade with the freezer open, check whether it spins freely and smoothly by hand; a blade that wobbles, binds, or contacts the housing points to the motor as the cause.
There's a lot of frost around the back panel of my freezer. Should I fix that before replacing the fan?
It's worth understanding which came first. Excess frost can be a cause of fan failure — a jammed blade can burn out the motor over time — or a result of it, since poor air circulation lets moisture condense and freeze unevenly around the coil area. Either way, thawing the ice out fully before you install the new motor makes the repair easier and lets you confirm the blade spins freely once everything is defrosted, rather than immediately jamming again on refrozen ice.
Do I need to transfer the fan blade from my old motor?
It depends on what's included with your specific order — check whether a blade came with your new motor before removing the old one. If a blade is not included, the blade from your original motor typically pulls off the shaft and can be transferred over. Photograph the blade's orientation on the shaft before removing it so you can reinstall it the same way; an improperly oriented blade can affect airflow or contact the housing.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 2.5W, 0.12A, ~1,870 RPM), brushless motor design, and mounting configuration of the original DA31-00334C evaporator fan motor used in compatible Samsung and Kenmore refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 242046001 Refrigerator Defrost Thermostat
The XPARTCO 242046001 is an aftermarket replacement defrost termination thermostat compatible with a wide range of Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, White-Westinghouse, and Kenmore refrigerators — including French door, side-by-side, and bottom-freezer models across the CFD, DGHF, E23BC, and EI23BC series. The defrost thermostat is a bi-metal safety device clipped to the evaporator coil or defrost heater tube in the freezer compartment. During the defrost cycle, it monitors the coil temperature and opens its circuit once the coil warms to roughly 50–60°F (10–15°C), which cuts power to the defrost heater. This confirms all the ice has melted and prevents the heater from continuing to run and overheating the freezer.
When the thermostat fails, one of two things happens: it can fail open (the defrost heater never runs, so ice builds up on the coils until airflow is blocked and cooling fails), or it can fail closed (the heater runs too long, overheating the compartment and often producing water pooling at the bottom of the freezer or leaking onto the floor). Features a cylindrical metallic body with two blue wires and white electrical connectors. Specification code L47-22F. Wire leads approximately 7.9". It directly replaces 242046001, 240386402, 240386403, AP4508400, 1564839, AH2378768, EA2378768, PS2378768, and L47-22F. Tip: the defrost thermostat, defrost heater, and defrost timer/control board form the defrost system and often fail together — replacing them as a set while the panel is off saves a repeat repair. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The XPARTCO 242046001 Refrigerator Defrost Thermostat fixes Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse refrigerators with excessive frost or ice buildup on the evaporator coils, fridge or freezer too warm (or too cold), the defrost cycle not activating, the refrigerator running continuously, or water pooling/leaking in the freezer. Bi-metal defrost termination thermostat — opens around 50–60°F to shut off the defrost heater. Cylindrical metal body, 2 blue wires, white connectors. Replaces 240386402, 240386403, AP4508400, 1564839, AH2378768, EA2378768, PS2378768, L47-22F. Often replaced together with the defrost heater and defrost timer.
Common Problems This Part Fixes
Excessive frost or ice buildup on the evaporator coils — defrost heater never running because the thermostat failed open
Freezer section too warm — iced-over coils blocking airflow
Refrigerator section too warm — cold air not circulating past frosted coils
Freezer or fridge section too cold — erratic defrost cycling
Defrost cycle not activating at all
Refrigerator running continuously without cycling off
Water pooling at the bottom of the freezer or leaking onto the floor — defrost heater running too long because the thermostat failed closed
Reduced cooling efficiency and food spoiling faster than normal
Multimeter continuity test on the thermostat shows an open circuit when cold (it should show continuity when cold)
Top of the thermostat visibly popped up or bulged — a sign of failure
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This defrost thermostat directly replaces the following OEM and cross-reference part numbers:
242046001, 1564839, AFR15304, AH2378768, AP4508400, EA2378768, EAP2378768, PD00005910, PS2378768, 240386402, 1258898, 240386403, AFR1311401, AH1525990, AP3970214, EA1525990, EAP1525990, PD00029401, PS1525990, L47-22F
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: to replace a 240386402, you may need to remove the wire plugs from this thermostat. Also known as a defrost bi-metal thermostat, defrost bimetal thermostat, or defrost termination thermostat.
Compatibility
This defrost thermostat is compatible with select refrigerators from the following brands:
Frigidaire refrigerators — CFD26 series (CFD26SDS0, CFD26WIS0/S1/S3/S4/S5/S6), CFD27 series (CFD27SDPS0, CFD27WIPB2/PB3, CFD27WIPS2/PS3, CFD27WIPW2/PW3)
Frigidaire refrigerators — CFD28 series (CFD28SDS1/SDS6/SDS9, CFD28WIB5–WIBC, CFD28WIS0–WISC, CFD28WIW5–WIWC and related revisions)
Frigidaire refrigerators — DGHF2360PF0, DGHF2360PF1 series
Electrolux refrigerators — E23BC68 series (E23BC68JPS0–JPSAA, E23BC68JSS0/SS1/SS2), E23BC78 series (E23BC78IPS8–IPSJA, E23BC78ISS7)
Electrolux refrigerators — EI23BC30 series (EI23BC30KB1/KB2/KB3, EI23BC30KS1/KS2/KS3, EI23BC30KW1/KW2/KW3), EI23BC35 series (EI23BC35KB3–KB8, EI23BC35KS3–KS7)
Crosley refrigerators (select Frigidaire-built models)
Gibson refrigerators (select models)
Kelvinator refrigerators (select models)
Tappan refrigerators (select models)
Westinghouse and White-Westinghouse refrigerators (select models)
Kenmore / Sears refrigerators (select Frigidaire/Electrolux-built models)
Note: The defrost thermostat, defrost heater, and defrost timer/control board work together as a system — when one fails, the others have typically experienced the same age and stress. Since the rear freezer access panel must already be off and all three components are right next to each other, replacing them together in one session prevents a repeat repair. Always verify your appliance model number before ordering.
Key Features
Defrost termination thermostat (bi-metal) — monitors the evaporator coil temperature during the defrost cycle and cuts power to the defrost heater once the ice has melted
Opens its circuit at approximately 50–60°F (10–15°C) — preventing the defrost heater from overheating the freezer compartment and saving energy
Protects the evaporator from overheating during the defrost cycle
Resolves "frost buildup," "too warm," "too cold," "defrost not activating," "runs continuously," and "water leaking in freezer" symptoms when caused by thermostat failure
Cylindrical metallic body with two blue wires and white electrical connectors
Sealed component — clips onto the evaporator coil or defrost heater tube
Specification code L47-22F — opens at approximately 47°F
Wire leads approximately 7.9" — connect inline with the defrost heater
Tube-mount clip-on design — latches onto the evaporator tubing
Replaces 240386402, 240386403, AP4508400, 1564839, AH2378768, EA2378768, PS2378768, and L47-22F
Compatible with Frigidaire CFD26/CFD27/CFD28/DGHF series, Electrolux E23BC/EI23BC series, plus Crosley, Gibson, Kelvinator, Tappan, Westinghouse, White-Westinghouse, and Kenmore Frigidaire-built refrigerators
Often replaced together with the defrost heater and defrost timer/control board as a paired defrost-system repair
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
XP242046001
Part Type
Refrigerator Defrost Termination Thermostat (Bi-Metal)
Condition
Aftermarket Replacement
Application
Refrigerators (Frigidaire/Electrolux platform)
Specification Code
L47-22F
Opening Temperature
Approximately 47°F (L47-22F rating)
Function
Cuts power to the defrost heater once ice has melted
Body
Cylindrical metallic
Wiring
Two blue wires (approx. 7.9") with white electrical connectors
Mounting
Tube mount — clips onto evaporator coil or defrost heater tube
Location
Freezer compartment, behind rear evaporator panel
Also Known As
Defrost bi-metal thermostat, defrost termination thermostat
Often Paired With
Defrost Heater, Defrost Timer / Control Board
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, White-Westinghouse, Kenmore
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Wear Work Gloves Unplug the refrigerator from the electrical outlet and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. The defrost thermostat is located in the freezer compartment behind the rear evaporator access panel. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access to the back wall. If there's heavy ice buildup covering the coils, allow the freezer to thaw completely before continuing — never chip or pry ice off the evaporator coils, as the aluminum fins damage easily and a damaged coil is a far more expensive repair. Remove the screws securing the rear evaporator access panel and carefully detach it to expose the evaporator coils, defrost heater, and defrost thermostat. Locate the thermostat — it's the small cylindrical metal component clipped onto the evaporator coil or the defrost heater tube, with two blue wires. Photograph the wiring connections and mounting position before disconnecting. Carefully disconnect the electrical connectors from the old thermostat, noting their orientation. Release the mounting clip and remove the old thermostat. Clip the new 242046001 thermostat onto the coil or heater tube in the exact same position — good thermal contact with the coil is essential for the thermostat to sense the temperature correctly. Reconnect the electrical connectors. While the panel is open, inspect the defrost heater and defrost timer/control board — if either is damaged or you're chasing a defrost problem, this is the ideal time to replace them too. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves.
Frequently Asked Questions
What does a defrost thermostat actually do?
It's the "off switch" for your refrigerator's defrost heater. Frost naturally accumulates on the evaporator coils during normal cooling. Periodically, the defrost timer/control board turns on the defrost heater to melt that frost. The defrost thermostat — a bi-metal switch clipped right to the coil — monitors the coil's temperature during this cycle. When the coil warms to approximately 47°F (its L47-22F rating — indicating all the ice has melted), the thermostat opens its circuit and cuts power to the heater. This stops the heater before it overheats the freezer compartment, and saves energy. Without a working thermostat, the defrost cycle either never runs (ice builds up) or runs too long (overheating and water pooling).
I found water pooling in my freezer — is the defrost thermostat the cause?
Quite possibly. A defrost thermostat that fails closed (stuck in the "on" position) lets the defrost heater run far longer than it should. The excess heat melts more than just the frost on the coils, producing more water than the drain can handle — which pools at the bottom of the freezer and can leak onto the floor. This is a commonly misdiagnosed symptom: many people assume they have a water line leak when the actual culprit is a failed defrost thermostat. If you're seeing unexplained water in the freezer or on the floor and there's no obvious water line issue, check the defrost thermostat. Also verify the defrost drain isn't clogged, which produces similar symptoms.
How do I test the defrost thermostat?
With the refrigerator unplugged, disconnect the thermostat's wire connectors and set your multimeter to continuity mode. A working defrost thermostat should show continuity when it's cold (below its opening temperature — which it will be if it's been in the freezer). If it reads open (no continuity) while cold, the thermostat has failed and needs replacement. For a more thorough test, place the thermostat in ice water (should show continuity), then warm it above its ~47°F opening point (should open — no continuity). If it doesn't switch at the correct temperatures, replace it. Another visual check: if the top of the thermostat has popped up or bulged, that's a sign it has failed.
Should I replace the defrost heater and timer at the same time?
Yes, it's strongly recommended. The defrost thermostat, defrost heater, and defrost timer/control board work together as a system — the timer initiates the defrost cycle, the heater melts the frost, and the thermostat terminates the cycle when the coil is clear. When one component fails, the others have typically experienced the same age and thermal stress, and a near-term failure of another defrost component is common. Since the rear access panel is already off and all three components are right there next to each other, replacing them together in a single session prevents a repeat repair down the road.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire/Electrolux OEM part, but is manufactured to match the L47-22F specification (opening at approximately 47°F), bi-metal switching function, cylindrical body, two-blue-wire connector configuration, and tube-mount clip of the original 242046001 defrost termination thermostat used in compatible Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, and Kenmore refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
ADQ72910908 Refrigerator Water Filter
Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family. You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness.
Cross Reference Number: ADQ72910908, AP6889635, PS12724753, LT500P/PC/PCS
12002782 Refrigerator Genuine OEM Overload Relay Kit
Replaces Part Numbers: 12002782, 1194680, 61005518, AH2004057, EA2004057, OEM12028982, AP4009659, PS2004057.
Description: This is a Genuine OEM compressor overload and relay kit for Specific Whirlpool, Maytag, Kenmore Refrigerator models. Kit was recently redesigned by manufacturer.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
