XPARTCO 6501KW2001B Washer Rotor Positioning Sensor
The XPARTCO 6501KW2001B is an aftermarket replacement rotor position sensor (RPS) compatible with a wide range of LG and Kenmore direct-drive front-load washers. This 5-pin Hall effect sensor mounts to the motor stator and monitors the speed and rotational direction of the motor rotor, feeding that data back to the control board so it can properly manage spin speed, direction changes during wash/rinse agitation, and load balancing.
When this sensor fails or reads inaccurately, the control board loses the feedback it needs to run the motor correctly, and the washer commonly throws an "LE" (motor/rotor position) error code, fails to spin or agitate, or runs unusually long cycles as it struggles to detect motor movement. Built with PBT-GF30 housing and black epoxy potting for durability in the motor compartment. It directly replaces 6501KW2001A, 6501KW2001D, AP5973402, PS11706506, EAP11706506, and 3282954. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The XPARTCO 6501KW2001B Washer Rotor Positioning Sensor fixes LG and Kenmore (LG-built) direct-drive front-load washers throwing an "LE" error code, failing to spin or agitate, or running abnormally long cycles. 5-pin Hall effect sensor, PBT-GF30 housing, black epoxy potting. Replaces 6501KW2001A, 6501KW2001D, AP5973402, PS11706506, EAP11706506, 3282954. Classic symptom: washer displays "LE" and stops mid-cycle, or won't spin at all.
Common Problems This Part Fixes
Washer displays an "LE" (motor/rotor position) error code
Tub fails to spin or agitate during the wash cycle
Washer struggles to detect load movement, resulting in abnormally long cycle times
Motor runs erratically or stalls mid-cycle
Washer stops partway through a cycle without completing
Inconsistent or failed direction changes during agitation
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This rotor position sensor directly replaces the following OEM and cross-reference part numbers:
6501KW2001B, 6501KW2001A, 6501KW2001D, PD00001726, EAP2497738, 6501KW2001C, EBR37560301, ALG52243, AP4457567, AP5973402, EAP11706506, 3282954, PD00059513, PS3529185, PS11706506
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This rotor position sensor is compatible with select LG-built direct-drive front-load washers, including:
LG front-load washers (including WM1814CW, WM2010CW, WM2016CW, WM3455HW)
Kenmore front-load washers (select LG-built models, including WD-3243RHD, WD-3245RHD, WD-3274RHD)
Important: Do not confuse this with 6501KW2002B, which is a different, non-interchangeable rotor position sensor used on other LG washer platforms. Some newer LG models also integrate the Hall sensor directly into the motor stator assembly (such as AJB73816004) rather than using a standalone sensor like this one. Always verify your appliance model number before ordering, and check your parts diagram to confirm whether your model uses a standalone sensor. Contact our support team with your model number if you're unsure.
Key Features
Direct-fit replacement LG/Kenmore washer rotor position sensor (Hall effect, 5-pin)
Resolves "LE error code," "won't spin," "won't agitate," and "long cycle time" symptoms
Monitors motor rotor speed and rotational direction for accurate control board feedback
PBT-GF30 housing with black epoxy potting for durability in the motor compartment
Replaces 6501KW2001A, 6501KW2001D, AP5973402, PS11706506, EAP11706506, and 3282954
Compatible with select LG and Kenmore (LG-built) direct-drive front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XP6501KW2001B
OEM Part Number
6501KW2001B
Part Type
Washer Motor Rotor Position Sensor
Condition
Aftermarket Replacement
Sensor Type
Hall Effect, 5-Pin
Housing Material
PBT-GF30 with black epoxy potting
Application
LG-Built Direct-Drive Front-Load Washer Motor Assembly
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power before beginning. Access the motor compartment, typically by removing the rear panel of the washer. Locate the rotor position sensor mounted to the motor stator near the rotor. Photograph the wiring before disconnecting, then unplug the sensor's connector from the wiring harness. Remove the mounting screw(s) or clip holding the sensor to the stator and remove the old sensor. Install the new 6501KW2001B sensor in the same position, taking care to seat it at the correct distance/orientation from the rotor magnets, and secure it. Reconnect the wiring harness connector, matching your photos. Reinstall the rear panel, restore power, and run a test cycle to confirm the washer spins and agitates normally without triggering an LE error code. Tools needed: nut driver or screwdriver, needle-nose pliers (for wiring connectors).
Frequently Asked Questions
My washer shows an "LE" error code — is this the part I need?
This is one of the most common causes of an LE (motor/rotor position) error on LG and LG-built Kenmore washers. If your washer displays LE and stops mid-cycle or won't spin, this sensor is a likely culprit. That said, LE errors can also stem from the control board or a damaged wiring harness between the sensor and the board, so if replacing the sensor doesn't resolve the error, those components are the next things to inspect.
Is this the same as the 6501KW2002B sensor?
No — 6501KW2001B and 6501KW2002B are different, non-interchangeable rotor position sensors used on different LG washer platforms. Confirm your exact part number from your appliance's parts diagram before ordering, since these two are easy to mix up by their similar naming.
My LG washer's parts diagram doesn't show a separate rotor position sensor — why?
Some newer LG models integrate the Hall sensor directly into the motor stator assembly (such as part AJB73816004) rather than using a standalone sensor like this one. If your model doesn't list a standalone sensor, check whether your repair requires the full stator assembly instead. Contact our support team with your model number if you're unsure which one applies to your washer.
Do I need any special tools to install this?
No special tools — a nut driver or screwdriver to access the rear panel and remove the sensor's mounting screw(s), plus needle-nose pliers to help with the wiring connector. The main thing to get right is reinstalling the new sensor at the same position and orientation relative to the rotor as the original.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DC96-01703G Washer Water Level Pressure Switch - Compatible with Samsung Washers
Product Description
Ensure accurate water level control in your washer with the replacement XPARTCO DC96-01703G Washer Water Level Pressure Switch. This replacement pressure switch is designed for select Samsung front-load and top-load washers, sensing and controlling water levels for optimal washing performance. It addresses issues like incorrect water levels, not filling, or error codes (e.g., E6 FA), offering a cost-effective alternative to OEM parts.
Note: Includes one water level pressure switch. Disconnect power and water supply before installation. Verify compatibility with your washer model.
Replaces part numbers: DC96-01703G, PD00026135, EAP4217083, AP5623035, PS4217083.
Compatibility:
Compatible with models including but not limited to:
Samsung: WF42H5000AW/A2, WF42H5200AP/A2, WF42H5400AF/A2, WF45K6200AW/A2, WF45K6500AW/A2, WF45M5500AP/A5, WF45M5500AZ/A5, WF50K7500AV/A2, WF50K7500AW/A2, WF56H9100AG/A2, WF56H9110CW/A2, WF457ARGSG, WW22K6800AW/A2, WV55M9600AW/A5, WV60M9900AV/A5, WD10J6410AW/ZS
Other brands: Select models requiring DC96-01703G
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung front-load and top-load washers requiring DC96-01703G.
🔥 Specifications: Precision-engineered water level pressure switch with 28" air pressure hose, designed for accurate water level sensing and control.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, work gloves; typically installed in 10–15 minutes.
🛡️ Effective Fixes: Resolves issues like incorrect water levels, not filling, motor idling, or error codes (e.g., E6 FA).
Product Specification
Part Number: XPDC96-01703G
Component Type: Washer water level pressure switch
Material: Durable plastic housing with metal contacts
Terminal Type: Electrical connector.
Operating Conditions: Suitable for high-humidity washer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and water supply before installation.
Tools Needed: Phillips screwdriver, work gloves.
Process: Access the switch by removing the top or back panel of the washer, disconnect the old switch’s wiring and hose, install the new switch, and reconnect wiring and hose. Ensure secure connections and test for proper operation.
Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your washer running efficiently today!
Add to cart now for a budget-friendly fix!
XPARTCO W10734521 Washer Clutch Slider Kit
The XPARTCO W10734521 is an aftermarket replacement washer clutch slider kit compatible with a wide range of Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Crosley, Estate, Jenn-Air, Roper, Magic Chef, Admiral, and Kirkland HE top-load washers. The clutch slider kit is part of the drive system that engages and disengages the inner tub from the gearcase — it's responsible for transitioning the washer between agitation and spin modes. The slider gear works together with the electromagnetic clutch and gearcase to move the inner tub during the wash and spin portions of every cycle. When the slider or its spring fails, the washer typically won't spin properly, won't agitate, makes grinding noise, or leaves clothes soaking wet at the end of a cycle.
This kit includes the slider, spring support, 30mm spiral, and bolt. Slider dimensions: 2-7/8" outer diameter x 7/8" deep. Support spring: 1-5/8" outer diameter x 1-1/8" long. Spiral: 1-5/16" outer diameter. Bolt: 7/8" head diameter x 1" high. Construction is metal and plastic in black, white, and gray. Important: this is the slider kit only — it does NOT include the electromagnetic clutch (sold separately as W10754448). The current W10734521 part number supersedes the earlier W10006484, W10006494, W10275082, W10447975, and W10905025. It also replaces 3452506, AP5952873, EAP10060062, PD00025495, and PS10060062. Installs in 60–90 minutes with basic hand tools.
Quick Answer
The XPARTCO W10734521 Washer Clutch Slider Kit fixes Whirlpool, Maytag, Kenmore, KitchenAid, and related HE top-load washers that won't spin or agitate properly, won't transition between cycle phases, leave clothes soaking wet, or make grinding noise during the spin cycle. Slider kit only — electromagnetic clutch (W10754448) is sold separately. Includes slider (2-7/8" OD), spring support (1-5/8" OD), 30mm spiral, and bolt. Replaces W10006484, W10006494, W10275082, W10447975, W10905025, 3452506, AP5952873, EAP10060062, PD00025495, PS10060062.
Common Problems This Part Fixes
Washer won't spin or spins very slowly — slider not engaging the gearcase for spin mode
Washer won't agitate — slider not transitioning the drive system to agitation mode
Clothes left soaking wet at the end of the cycle — incomplete spin
Grinding, rattling, or clunking noise during the spin or agitation phase
Washer fills and drains normally but never spins or agitates
Worn or broken slider gear teeth visible on the drive assembly
Weak or broken slider spring — washer drive losing positive engagement
Repeated cycle interruptions in the spin or agitation portion of cycles
What's in the Kit
Part 1
Slider Gear
2-7/8" outer diameter x 7/8" deep · Slides over the drive assembly shaft to engage/disengage the gearcase for agitation and spin transitions · Install with the teeth facing outward
Part 2
Spring Support
1-5/8" outer diameter x 1-1/8" long · Provides return tension for the slider · Replace whenever the gearcase or slider is replaced — spring can weaken over time
Part 3
30mm Spiral
1-5/16" outer diameter · Spiral retaining component that holds the slider assembly together on the drive shaft
Part 4
Bolt
7/8" head diameter x 1" high · Secures the assembly
Replaces Part Numbers
This clutch slider kit directly replaces the following OEM and cross-reference part numbers:
W10734521, 3452506, W10006484, W10006494, W10275082, W10447975, AP5952873, AWP41487, EAP10060062, PD00025495, PS10060062.
W10734521 is the current production part superseding W10006484, W10006494, W10275082, W10447975, and W10905025. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This clutch slider kit is compatible with select HE top-load washers from the following brands:
Whirlpool top-load washers (Cabrio, WTW5000, WTW5500, WTW5700, WTW6000, WTW6200, WTW6400, WTW7000, WTW7120, WTW8000, WTW8200, WTW8500, WTW8700 series and related models)
Maytag top-load washers (Bravos and Centennial series and related models)
Kenmore / Sears top-load washers (Whirlpool-built — select 110-series and related models)
KitchenAid top-load washers (select models)
Amana top-load washers (select models)
Crosley top-load washers (select models)
Estate top-load washers (select models)
Jenn-Air top-load washers (select models)
Roper top-load washers (select models)
Magic Chef top-load washers (select models)
Admiral top-load washers (select models)
Kirkland top-load washers (select models)
Important — Slider Kit Only, NOT Clutch: This is the clutch slider kit (slider, spring, spiral, bolt) — it does not include the electromagnetic clutch assembly. The electromagnetic clutch is part number W10754448 and is sold separately. If you need both components, order each part separately. Many repair scenarios call for replacing both at the same time, since both wear together. Always verify your model number and confirm exactly which component has failed before ordering.
Key Features
Complete slider repair kit — slider, spring support, 30mm spiral, and bolt included as a matched set
Works with the electromagnetic clutch and gearcase to drive the inner tub during agitation and spin modes
Resolves "won't spin," "won't agitate," and "clothes left soaking wet" symptoms when the slider has worn or the spring has weakened
Current production part number — supersedes W10006484, W10006494, W10275082, W10447975, and W10905025
Slider: 2-7/8" outer diameter x 7/8" deep · Spring: 1-5/8" OD x 1-1/8"L · Spiral: 1-5/16" OD · Bolt: 7/8" head x 1"H
Metal and plastic construction in black, white, and gray
Important: slider kit only — electromagnetic clutch (W10754448) sold separately
For full performance, replace all components in the kit together as a set
Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Crosley, Estate, Jenn-Air, Roper, Magic Chef, Admiral, and Kirkland HE top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 60–90 minutes with basic hand tools
Product Specifications
Part Number
W10734521
Supersedes
W10006484, W10006494, W10275082, W10447975, W10905025
Part Type
Washer Clutch Slider Kit
Condition
Aftermarket Replacement
Application
HE Top-Load Washers (Whirlpool platform)
Includes
1x Slider, 1x Spring Support, 1x 30mm Spiral, 1x Bolt
Slider Dimensions
2-7/8" Outer Diameter x 7/8" Deep
Spring Support Dimensions
1-5/8" Outer Diameter x 1-1/8" Long
Spiral Dimensions
1-5/16" Outer Diameter
Bolt Dimensions
7/8" Head Diameter x 1" High
Material
Metal / Plastic
Color
Black / White / Gray
Electromagnetic Clutch
NOT included — see W10754448 (sold separately)
Compatible Brands
Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Crosley, Estate, Jenn-Air, Roper, Magic Chef, Admiral, Kirkland
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves Disconnect power and turn off the water supply before beginning. Place towels under the washer — some residual water may spill from hoses during disassembly. Wear work gloves to protect your hands. Unthread the hot and cold water supply hoses from the inlet valve ports. Disconnect the drain hose from the outlet port using channel-lock pliers to release the spring clamp. Carefully tip the washer onto its side or back on a padded surface to access the underside. Disconnect the wiring harnesses to the drive motor and pull the rotor free — be prepared for some resistance, as the permanent magnets in the rotor require some effort to remove. Use a small awl inserted between the slider gear teeth to release the spring retainer. With the retainer released, pull off the old spring and slider gear. Note the orientation of the slider — teeth facing outward. Install the new W10734521 components in sequence: slide the new slider gear onto the drive assembly shaft with teeth facing outward, install the new spring support and 30mm spiral, and secure with the new bolt. Reinstall the rotor (the magnets will pull it into place), reconnect the wiring harnesses, return the washer to upright, reconnect supply hoses and drain hose, restore power and water, and test the spin cycle for proper function. Tools needed: Phillips screwdriver, socket set, channel-lock pliers, small awl, padded surface for tipping, work gloves.
Frequently Asked Questions
What's the difference between W10734521 and W10754448?
These are two different parts in the same drive system. The W10734521 is the clutch slider kit — it includes the slider gear, spring support, spiral, and bolt that physically engage/disengage the inner tub from the gearcase to transition between agitation and spin modes. The W10754448 is the electromagnetic clutch itself — the electrical component that drives the engagement. Both can fail independently, and many repair scenarios call for replacing both at the same time since they work together. Confirm exactly which component has failed before ordering, or order both if you're rebuilding the drive system as a full repair.
My washer won't spin — is it the slider or something else?
A washer that won't spin can have several causes: a failed slider kit, a failed electromagnetic clutch (W10754448), a damaged drive belt, a failed motor or rotor, a broken lid switch, or — on some models — a failed gearcase. The slider kit is one of the more common causes when the symptom is "fills and drains but won't spin" with no obvious noise or burning smell. Before replacing the slider, check that the lid latch strike (W11457841 on some models) is engaging properly, the drive belt is intact, and the motor is functioning. If those check out and the slider gear shows visible wear, missing teeth, or a stretched spring, the W10734521 kit is the right repair.
Should I replace all parts in the kit together?
Yes — for the kit to perform as designed, all components should be replaced as a matched set. The slider, spring support, spiral, and bolt all work together — if one is worn, the others have typically experienced the same load and wear. Reusing old components alongside new ones can cause premature failure of the new parts and a repeat repair. The W10734521 kit is priced and packaged for a complete replacement, so install all four pieces during your repair.
What is the difference between W10734521 and the older part numbers it replaces?
W10734521 is the current production version of this slider kit. It directly supersedes W10006484, W10006494, W10275082, W10447975, and W10905025 — all of which were earlier OEM part numbers for variations of the same slider kit across production revisions. Whirlpool consolidated these into the W10734521 to streamline the parts catalog. If your washer's parts diagram shows any of these older numbers, the W10734521 is the correct current replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, gear profile, and drive engagement function of the original W10734521 clutch slider kit used in compatible Whirlpool, Maytag, Kenmore, and related HE top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
W10775188 Washer Genuine OEM Washplate
Replaces Part Numbers: W10775188, 4282681, W10698538, W10834891, AP5959417, PS11699797.
W10775188 Washer Washplate – Genuine OEM Part
Restore optimal cleaning power with the W10775188 Washer Washplate. This Genuine OEM part replaces a worn or damaged washplate to ensure efficient agitation and even cleaning performance.
Key Features:
✅ Genuine OEM Part – built to factory specs
🔁 Replaces: 4282681, W10698538, W10834891, AP5959417, PS11699797
🌀 Provides powerful agitation for deep cleaning
🛠️ Fits select Whirlpool, Maytag, and Amana top-load washers
🧰 Easy to install – includes center bolt
⚠️ Always unplug your washer before servicing. Need help with compatibility? Contact us!
📦 Part Number: W10775188
Genuine OEM Frigidaire / Electrolux Washer Part
134762010 Washer Genuine OEM Water Level Pressure Switch
Monitors air pressure from the washer tub and signals the control system when the correct water level has been reached.
Product Overview
The Frigidaire 134762010 Washer Water Level Pressure Switch senses changes in air pressure through the washer pressure hose to monitor the amount of water inside the tub. It signals the washer control system when the correct water level has been reached so the appliance can fill, wash, drain, and advance through the cycle correctly.
This is a new Genuine OEM Frigidaire / Electrolux replacement part manufactured to the original equipment specifications for proper fit, electrical connection, and operation in compatible washers.
Quick Answer
134762010 is a Genuine OEM water-level pressure switch for select Frigidaire, Electrolux, Kenmore, and Crosley front-load washers. It replaces 7134762010. This listing is for the pressure switch only; the pressure hose, clamp, wiring harness, and mounting hardware are not included unless specifically shown.
Common Problems This Part May Fix
Washer overfills with water
Washer does not fill or underfills
Incorrect or inconsistent water level
Cycle stops or will not advance
Washer does not drain or complete the cycle correctly
E35 or another water-level-related error on applicable models
Replaces and Cross-References
134762010, 1482962, 7134762010, AH2349296, AP4368525, AFR14413, EA2349296, PD00007813, PS2349296.
134762010 is the current manufacturer part number. Other numbers are previous manufacturer or retailer cross-references.
Compatibility
Designed for select front-load washers manufactured by Electrolux and sold under Frigidaire, Electrolux, Kenmore, and Crosley brand names. Confirmed model examples include:
41741100000
41744130000
EIFLS55IRR0
EIFLS60JIW1
FAFS4473LN0
FAFW3921NW0
FFFW5000QW0
CFW4700LW0
CFW7400QW0
Important: This is a partial compatibility list. Pressure switches can look alike while using different settings, terminals, mounting tabs, or control calibration. Verify the complete washer model number before ordering.
Key Features
Genuine OEM Frigidaire / Electrolux replacement part
Monitors the water level inside the washer tub
Signals the control system when the correct fill level is reached
Supports proper filling, washing, draining, and cycle operation
Snap-tab mounting design on compatible models
Designed for original fit and electrical connection
Product Specifications
Manufacturer Part Number
134762010
Brand
Frigidaire / Electrolux
Part Type
Washer Water Level Pressure Switch
Condition
New
Quality
Genuine OEM
Application
Front-Load Washing Machine
Primary Function
Senses and controls the washer water level
Included
One Water Level Pressure Switch
Installation Notes
Unplug the washer and shut off both water-supply valves.
Remove the washer top panel as required for your model.
Photograph the wire connector and pressure-hose connection before disconnecting them.
Disconnect the electrical connector without pulling on the wires.
Release the clamp and carefully remove the pressure hose.
Remove the old switch and install the replacement in the same position.
Reconnect the hose, clamp, and electrical connector, then reinstall the top panel.
Diagnostic tip: Inspect the pressure hose for cracks, pinholes, blockage, moisture, loose connections, or trapped debris. A damaged or obstructed hose can cause the same symptoms as a failed pressure switch.
Frequently Asked Questions
Is 134762010 a genuine OEM part?
Yes. It is a Genuine OEM Frigidaire / Electrolux washer water-level pressure switch.
What does the pressure switch do?
It monitors air pressure from the washer tub and signals the control system when the correct water level has been reached.
Which part number does it replace?
It replaces previous manufacturer part number 7134762010.
Does this include the pressure hose?
No. The listing is for the pressure switch only unless additional components are specifically shown and stated as included.
Will it fit every Frigidaire or Electrolux washer?
No. Verify the complete appliance model number and required manufacturer part number before purchasing.
Shop With Confidence
Purchase the correct Genuine OEM replacement part for dependable fit and operation. Verify your washer model number before ordering, and contact our parts team when compatibility assistance is needed.
Genuine OEM PartFast U.S. ShippingCompatibility SupportSecure Checkout
Genuine OEM WE04X24550 Dryer Timer
The Genuine OEM GE WE04X24550 is a mechanical dryer timer. It controls the dryer's cycle duration and its electrical components, advances the cycle through its stages, and shuts the dryer off at the end of the cycle. When the timer fails, the dryer may not start, tumble endlessly, shut off early, or have a timer knob that won't advance.
This is the original GE part, and it is a direct replacement for the earlier WE04X24549 timer. It is listed for select GE dryers, both gas and electric. Check your model number before ordering, since timers differ between dryer families.
Quick Answer
The Genuine OEM WE04X24550 Dryer Timer fixes a GE dryer that tumbles endlessly, shuts off early, won't start, or has a timer knob that won't advance because the timer has failed. It replaces WE04X24549. Classic symptom: the dial doesn't advance, or the dryer runs without ever shutting off at the end of the cycle.
Common Problems This Part Fixes
Dryer tumbles endlessly and doesn't shut off
Dryer shuts off early
Timer knob won't advance
Dryer won't start, or starts and then stops
Controls that don't respond, or heat that doesn't come on
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer directly replaces the following part numbers:
WE04X24550, WE04X24549, 234D2377P003, 234D2377P004, 4546121, TMD14M30, TMD16M12, AGE25986, AP6031056, FIX11763064, OEM18093177, PD00039467, PS11763064
WE04X24549 is the earlier GE number, and WE04X24550 was designed as its direct replacement. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This timer is listed for GE gas and electric dryers, including these examples:
GTD42GASJ0WW, GTD42GASJ1WW, GTD42GASJ3WW, GTX42GASJ1WW, GTX42GASJ3WW
GTD48GASW0WB, ETD48GASW0WB, GTD48EASW0WB
XTD72G8ST0WS, XTD72E8ST1WS
Note: The models above are a sample from one retailer, not a full list. The timer's fit depends on the dryer family, so confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM GE mechanical dryer timer
Controls cycle duration and advances through the cycle stages
Handles end-of-cycle shutoff
Direct replacement for WE04X24549
Fits select GE gas and electric dryers
Product Specifications
Part Number
WE04X24550
OEM Part Number
WE04X24550
Part Type
Dryer Timer (Mechanical)
Condition
Genuine OEM
Dimensions
4" D x 3" H x 2" W
Application
GE Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. Remove the console as shown in your model's service guide to reach the timer. Photograph the wiring, or note each wire's position, before disconnecting it, then move the connectors to the new timer, mount it, and refit the knob. Test every cycle selection before closing the dryer. This repair involves electrical components, so consult a qualified technician if you are not comfortable with it.
Frequently Asked Questions
My dryer won't shut off, or the knob won't advance. Is this the part I need?
A worn or stuck timer is a common cause of endless tumbling, early shutoff, and a knob that won't move. If the dryer won't start or heat, check the door switch, thermal fuse, and heating components too, then test the timer with a multimeter against your wiring diagram.
Is WE04X24550 the same as WE04X24549?
WE04X24550 was designed as the direct replacement for WE04X24549, and this timer covers both numbers.
Is this a hard repair?
Retailers rate it medium difficulty because it involves electrical components. Photograph the wiring before you start, and consult a technician if you are unsure.
Will this fit my dryer?
It is listed for select GE gas and electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
(4 Pack) 74009592CM Burner Control Knob
Black plastic burner knob
Fits Specific Maytag, Jenn Air, Whirlpool ranges
Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334.
Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature.
This is an aftermarket part that can be used as a replacement for the OEM part.
DC64-01570A Washer Genuine Door Boot
Rubber boot assembly.
Fits select Samsung front-load washer models.
Replaces Part Numbers: DC64-01570A, DC97-14560A, DC97-14560K, DC97-14560L, AP4342244, PS4211426.
Description: This Washer Door Diaphragm is an essential component for maintaining your washer's functionality. This Genuine replacement part ensures a secure and effective seal, preventing leaks and enhancing the overall performance of your washing machine. Specifically designed for compatibility with a range of Samsung washer models, it guarantees a perfect fit and straightforward installation. Made from durable materials,
XPARTCO AJU75152601 Washer Water Inlet Valve Replaces 5221EA1008F, AJU73213301
The XPARTCO AJU75152601 is an aftermarket replacement washer water inlet valve assembly compatible with select LG and Kenmore top-load washers in the WT1, WT4, WT5, WT6, and WT7 series. This is a multi-port valve assembly that controls water flow from the household supply lines into the washer tub and dispenser compartments. The assembly contains multiple solenoid-operated valve ports: hot water inlet, cold water inlet, bleach dispenser valve, fabric softener dispenser valve, and jet spray valve — all integrated into a single assembly that connects to the washer's control board via wiring harnesses.
When the water inlet valve fails — or when one individual port fails — the washer may not fill at all, fill too slowly, fill with the wrong temperature, overfill, fail to dispense bleach or fabric softener, or leak from the valve body. The valve solenoids operate at 12V DC. This kit includes the complete valve assembly and two AGM73269501 inlet screens. It directly replaces AJU73213301, 5221EA1008F, 5221EA1008P, AGF76283896, AP6308239, TAW35618287, AH3527446, AJU75152603, EA3527446, PS3527446, and PS12374721. Installs in 15–25 minutes with basic hand tools.
Quick Answer
The XPARTCO AJU75152601 Washer Water Inlet Valve fixes LG and Kenmore top-load washers that won't fill, fill slowly, fill with wrong temperature, won't dispense bleach or fabric softener, overfill, or leak from the valve. Multi-port assembly with hot, cold, bleach, fabric softener, and jet spray valves. 12V DC solenoids. Includes 2 AGM73269501 inlet screens. Compatible with LG WT1xxx–WT7xxx and Kenmore 796-series. Replaces AJU73213301, 5221EA1008F, 5221EA1008P, AP6308239, TAW35618287, PS12374721.
Common Problems This Part Fixes
Washer not filling with water at all when a cycle is started
Washer filling very slowly — one or more valve ports partially blocked or failing
Washer filling with only hot or only cold water — one temperature solenoid has failed
Washer overfilling or filling continuously — valve port stuck open
Bleach dispenser not dispensing during the wash cycle
Fabric softener not dispensing at the correct rinse cycle point
Jet spray not activating during fill
Water dripping into the tub between cycles — valve port not closing completely
Water leaking from the valve body or connection points at the back of the washer
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
5221EA1008F, AJU73213301, AJU75152601, AH3527446, AJU75152603, EA3527446, PS3527446, ALG53778, AP6308239, PD00042814, PS12374721, TAW35618287.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select LG and Kenmore top-load washers from the following series:
LG top-load washers — WT1 series (WT1101CW, WT1201CW, WT1201CV, WT1301CW, WT1501CW, WT1701CW, WT1701CV, WT1801HVA, WT1801HWA and related models)
LG top-load washers — WT4 series (WT4801CW, WT4870CW, WT4970CW and related models)
LG top-load washers — WT5 series (WT5001CW, WT5070CW, WT5101HV, WT5101HW, WT5170HV, WT5270CW, WT5480CW, WT5680HVA, WT5680HWA and related models)
LG top-load washers — WT6 series (select models)
LG top-load washers — WT7 series (WT7200CW, WT7200CV, WT7500CW, WT7600HKA and related models)
Kenmore / Sears top-load washers — 796-series (79631512210, 79631512211, 79631522211, 79631502210, 79631502211 and related models)
Note: Always verify your exact model number before ordering. Newer LG WT7100/WT7150/WT7400/WT7405 series models use the AJU75152602 valve instead. Contact our support team with your model number to confirm the correct valve for your washer.
Key Features
Multi-port valve assembly — controls hot water, cold water, bleach dispenser, fabric softener dispenser, and jet spray from a single replaceable assembly
12V DC solenoid operation — responds to signals from the washer's control board to deliver the correct water to each compartment
Resolves fill, dispenser, overfill, and drip-when-off symptoms in a single replacement
Kit includes complete valve assembly and 2x AGM73269501 replacement inlet screens
ABS plastic and stainless steel construction — durable and resistant to mineral buildup
Replaces AJU73213301, 5221EA1008F, 5221EA1008P, AP6308239, TAW35618287, and over 10 additional cross-reference numbers
Compatible with LG WT1xxx through WT7xxx and Kenmore 796-series top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
DIY repair — installs in 15–25 minutes with basic hand tools
Product Specifications
Part Number
AJU75152601
Also Replaces
AJU73213301, 5221EA1008F (current supersession)
Part Type
Washer Water Inlet Valve Assembly (Multi-Port)
Condition
Aftermarket Replacement
Application
LG and Kenmore Top-Load Washers
Valve Ports
Hot water, cold water, bleach dispenser, fabric softener dispenser, jet spray
Solenoid Voltage
12V DC
Material
ABS plastic / Stainless steel
Kit Includes
Valve assembly + 2x AGM73269501 inlet screens
Compatible Series
LG WT1xxx, WT4xxx, WT5xxx, WT6xxx, WT7xxx; Kenmore 796-series
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off both the hot and cold water supply valves before beginning. Pull the washer away from the wall to access the back panel. The water inlet valve assembly is mounted on the upper rear of the washer — the external supply hoses connect to the hot and cold inlet ports. Photograph all wire harness connections and hose routing before disconnecting anything. Before installing, install the new inlet screens (AGM73269501) included in the kit into the hot and cold inlet ports of the new valve. Disconnect the old valve's external supply hoses, internal hoses, and wire harness connectors. Unscrew the mounting screws and remove the old valve. Install the new AJU75152601 valve, reconnect all hoses and wire harnesses in the same positions as documented in your photos, and secure the mounting screws. Reconnect the external supply hoses, restore water supply and power, and run a fill cycle to verify proper filling, confirm all dispenser ports activate at the correct cycle points, and check for leaks. Tools needed: Phillips screwdriver, pliers.
Frequently Asked Questions
What is the difference between AJU75152601, AJU73213301, and 5221EA1008F?
These are all part numbers for the same LG washer water inlet valve assembly used across different production runs. 5221EA1008F was the original part number, AJU73213301 was an updated version, and AJU75152601 is the current part number. All three are interchangeable. If your washer's documentation, parts diagram, or old valve label shows any of these numbers, this replacement is the correct current part to order.
My washer won't dispense fabric softener — is this the right part?
Yes — the fabric softener dispenser solenoid is one of the ports integrated into the AJU75152601 valve assembly. When the fabric softener dispenser fails to activate at the right point in the rinse cycle, it is almost always because the solenoid valve controlling that port has failed. Since it is part of the same multi-port valve assembly, replacing the AJU75152601 resolves fabric softener, bleach, and jet spray dispenser issues in the same repair. Individual ports cannot be replaced — the complete assembly must be replaced when any one port fails.
What are the AGM73269501 inlet screens included in the kit?
The AGM73269501 screens are small mesh filters that install inside the hot and cold water inlet ports of the valve. They trap mineral deposits and debris from the household water supply before they can reach the valve seats and solenoid mechanisms. The kit includes two screens — one for the hot inlet and one for the cold inlet. Installing these fresh screens with the new valve helps extend valve life, especially in areas with hard water. If the old valve failed due to mineral clogging rather than solenoid failure, cleaning the supply hoses before installation is also recommended.
How do I know if the water inlet valve has failed vs. the control board?
You can test the valve solenoids with a multimeter. Disconnect the harness from a solenoid coil and probe both terminals — a working solenoid coil shows a resistance reading (typically 200–500 ohms); an open circuit confirms the solenoid has failed. If all solenoid coils test good but the valve still does not operate, the control board may not be sending the correct 12V DC signal to the solenoids — this requires checking voltage at the solenoid connectors with the washer powered and in a fill cycle, which is a more advanced diagnostic step.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from ABS plastic and stainless steel to match the port configuration, solenoid specifications, and dimensions of the original AJU75152601 water inlet valve assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM ACZ74070504 Washer Dispenser Drawer Housing Assembly
The Genuine OEM LG ACZ74070504 is the dispenser housing assembly for select LG washers. It is the housing that holds the dispenser drawer and directs water through it during the cycle, so detergent, bleach and fabric softener are flushed into the tub. When it cracks, leaks or stops dispensing, the housing is replaced as a complete assembly.
This is the original LG part, not an aftermarket equivalent. It is sold individually. Check your model number before ordering, because LG uses several similar dispenser housings.
Quick Answer
The Genuine OEM ACZ74070504 Dispenser Drawer Housing Assembly replaces the dispenser housing on a compatible LG washer when it leaks or the dispenser isn't working properly. Classic symptoms: water leaking from the dispenser drawer area after a cycle, or detergent not being flushed into the tub.
Common Problems This Part Fixes
Washer leaks from the dispenser drawer area
Dispenser not working properly
Detergent not flushed into the tub, on models where the water inlet valve is built into the housing and has failed
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dispenser housing assembly is listed under the following part number:
ACZ74070504 replaces 4952241, AP6836158, ALG52348, EAP12714033, PD00057989, PS12714033
If your old housing shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This dispenser housing assembly is listed for select LG washers, including these examples:
LG WM3400CW, WM3470CM, WM3470CW, WM3500CW
LG WM3600HVA, WM3600HWA
LG WM3700HRA, WM3700HVA, WM3700HWA
Note: The models above are a sample, not a full list. LG sells similar-looking dispenser housings with different part numbers, such as ACZ74070508, which is listed for other models. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM LG part, not an aftermarket equivalent
Complete dispenser housing assembly, replaced as one unit
Directs water through the dispenser drawer to flush detergent, bleach and softener
Sold individually
Product Specifications
Part Number
ACZ74070504
OEM Part Number
ACZ74070504
Part Type
Washer Dispenser Drawer Housing Assembly
Condition
Genuine OEM
Manufacturer
LG
Quantity
1 Assembly
Application
Select LG Washers
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the washer and turn off the water supply before you begin, and wear work gloves. Remove the top of the washer per your model's service guide, then label and disconnect the water hoses from the housing. Pull out the dispenser drawer, remove the screws holding the housing, and lift the old housing out. Fit the new assembly, reconnect each hose to its original position, refit the top, restore power and water, and run a short rinse cycle to check for leaks.
Frequently Asked Questions
My washer leaks from the dispenser drawer. Is this the part I need?
It can be. Customers report that replacing this housing stopped a leak that cleaning the drawer did not. Check the hoses and clamps first to confirm the housing is the source.
Does this include the dispenser drawer?
It is sold as the dispenser housing assembly. Retailers do not list its contents in detail, so contact our support team if you need to confirm what is included before ordering.
Is this an OEM or aftermarket part?
This is a genuine OEM part from LG, not an aftermarket equivalent.
Will this fit my washer?
It is listed for select LG washers, but the model list above is only a sample and similar LG housings use different part numbers. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WPW10185972 Dryer Timer
The Genuine OEM Whirlpool WPW10185972 is the dryer timer, the electromechanical control that advances through your dryer's preset cycles. Its internal contacts open and close the circuits that control heat and the drum motor, so the dryer runs for the right amount of time at the right setting. When the timer fails, the dryer may not start, may not advance through the cycle, or may over-dry or under-dry your clothes.
This is the original Whirlpool part, also sold under the older number W10185972. It is listed for Whirlpool-built electric dryers sold as Whirlpool, Maytag, Amana, Admiral, Roper, Inglis, and Crosley. Check the part number before ordering, because a similar timer, WPW10185971, is listed for different models.
Quick Answer
The Genuine OEM WPW10185972 Dryer Timer fixes a Whirlpool-built electric dryer that won't start, won't advance through its cycle, or over-dries or under-dries because the timer has failed. It is also listed as W10185972. Classic symptom: the dial turns but the dryer doesn't run or doesn't engage all the cycle selections.
Common Problems This Part Fixes
Dryer won't start or won't turn on
Dryer doesn't engage all cycle selections
Dryer over-dries or under-dries clothes
Timer dial doesn't advance through the cycle
Heat or motor runs at the wrong time in the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer directly replaces the following part numbers:
WPW10185972, W10185972, 1481701, WPW10185972VP, 418-617-20-B5, AP6016537, AWP49431, EAP11749827, PD00002683, PS11749827
W10185972 is the older Whirlpool number. No other cross-reference numbers were confirmed. The similar timer WPW10185971 is a different part and is not listed as interchangeable. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This timer is listed for Whirlpool, Maytag, Amana, Admiral, Roper, Inglis, and Crosley electric dryers, including these examples:
Whirlpool 4KWED4750BQ1, Maytag 4KMEDC100BQ1, Amana 4KNED4400BQ1, Amana NED5100TQ1
Admiral AED4475TQ1, YAED4475TQ1, Crosley CEDX631VQ1
Inglis IED4400VQ1, YIED4400VQ1, Roper RED4400VQ1, RED4440VQ1, YRED4340SQ2
Note: The models above are a sample from one retailer, not a full list. A similar timer, WPW10185971, is listed for different dryer models (such as Admiral AGD4475TQ1 and Amana NGD5100TQ1), so check which number your model calls out. Confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool dryer timer
Advances through preset cycles and switches heat and motor circuits
Also listed under the older number W10185972
Resolves no-start, cycle-advance, and over- or under-drying problems
Fits Whirlpool-built electric dryers sold under many brand names
Product Specifications
Part Number
WPW10185972
OEM Part Number
WPW10185972
Part Type
Dryer Timer
Condition
Genuine OEM
Application
Whirlpool-Built Electric Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning, and wear work gloves. Remove the control panel as shown in your model's service guide to reach the timer. Before disconnecting anything, photograph the wire connections or note the position of each wire, since the timer has many terminals. Move the wires one at a time to the new timer, mount it, replace the knob, and restore power. Test each cycle selection before closing the dryer.
Frequently Asked Questions
My dryer won't start. Is this the part I need?
A failed timer is a common cause, especially if the dial turns but the dryer doesn't run or doesn't engage every cycle selection. The door switch, start switch, and thermal fuse can cause the same symptom, so check those first.
Is WPW10185972 the same as W10185972?
Yes. W10185972 is the older Whirlpool number for the same timer, and this part covers both numbers.
Can I use WPW10185971 instead?
No, don't assume so. WPW10185971 is a separate timer listed for different models. Use the number your model calls out, or contact our support team to confirm before ordering.
Will this fit my dryer?
It is listed for many Whirlpool-built electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WH01X27954 Washer Lid Switch (Old Style)
Product Overview
The XPARTCO WH01X27954 Washer Lid Switch (Old Style) is designed to restore proper lid detection and washer operation. This high-quality replacement detects whether the washer lid is closed, allowing safe operation during wash and spin cycles. A broken or faulty switch can cause the washer not to start, stop mid-cycle, or fail to spin. Replacing it with this durable XPARTCO switch restores normal functionality and safety performance. Old-style GE lid switch (does not require harness replacement).
Quick Answer
If your washer will not spin, drain, or start properly, a faulty WH01X27954 lid switch may be the cause. Replacing this old style washer lid switch helps restore normal washer operation and cycle performance.
Replaces Part Numbers
Replaces OEM part number: WH08X32697, WH01X27954, WH08X31577, WH01X24114, WH01X26114, 290D1580P001, 290D1580P004, 290D1580P002, 290D1580P003, WH08X31577, AP7015047, PS16554755.
Compatibility
This washer lid switch is compatible with select GE, Hotpoint, and other compatible top-load washers that use the old style lid switch design.
Example compatible models include (but are not limited to): GE GTW220ACK1WW GTW220ACK2WW GTW220ACK3WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW330ASK2WW GTW330ASK3WW GTW330ASK4WW GTW330ASKWW GTW335ASN0WW GTW335ASN2WW GTW335ASNWW GTW460AMJ0WW GTW460AMJ1WW GTW460AMJ2WW GTW460AMJ3WW GTW460AMJ4WW GTW220ACK4WW GTW220ACK5WW GTW220ACK6WW GTW220ACK7WW GTW220ACKWW GTW330ASK0WW GTW330ASK1WW GTW335ASN0WW.
GE Top-Load Washers
Hotpoint Washers
Old Style Lid Switch Applications
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Washer not spinning
Washer not draining
Washer not starting cycle
Lid switch not detecting closed lid
Key Features
Designed for old style washer lid switch applications
Helps restore safe and proper washer operation
High-quality aftermarket replacement
Durable construction for reliable performance
Product Specifications
Part Number: WH01X27954
Part Type: Washer Lid Switch
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Top-Load Washers
Style: Old Style
Troubleshooting Guide
Washer fills but does not spin → Lid switch may be faulty
Washer will not start cycle → Lid switch may not detect closed lid
Washer stops before spin cycle → Defective lid switch can interrupt operation
When Should You Replace This Lid Switch?
Replace this lid switch if your washer does not start, spin, or drain properly, or if the switch no longer detects when the lid is closed.
Installation Notes
⚠️ Disconnect power before installation. Access the lid switch area according to your washer design and install the replacement securely. Refer to your appliance manual if needed.
Related Parts
Washer Lid Strike
Washer Timer
Washer Door or Lid Lock Components
Frequently Asked Questions
Will this lid switch fit my washer?This switch fits select GE and compatible washers that use the old style lid switch. Always verify your model number.
What does a washer lid switch do?It detects whether the washer lid is closed so the machine can operate safely.
What are signs of a bad lid switch?Common signs include the washer not spinning, not starting, or stopping before the cycle completes.
Is this the old style version?Yes, this listing is for the old style WH01X27954 washer lid switch.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality aftermarket parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
