XPARTCO WH05X24185 Washer Clutch
The XPARTCO WH05X24185 is an aftermarket replacement clutch for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This clutch engages and disengages the transmission during the wash and spin cycles, transferring the motor's power to spin the basket so your clothes finish damp rather than soaked.
Made of white plastic with a glossy finish, measuring approximately 3"L x 3"W x 1"H. Sold individually and does not include any other parts, such as the shift actuator (our WH03X30517 listing) that works alongside it. Common causes of failure include wear and tear over time, excessive load, or mechanical obstruction. Symptoms of a worn or failing clutch include clothes coming out wet even after a completed spin cycle, a slight burning odor during operation, or issues with spinning or agitating. It directly replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473.
Quick Answer
The XPARTCO WH05X24185 Washer Clutch fixes GE, Hotpoint, Haier, Monogram, and Café top-load washers where clothes come out wet after spinning, there's a slight burning odor during operation, or the washer has trouble spinning or agitating. White plastic, glossy finish, ~3"L x 3"W x 1"H. Sold individually. Replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473. If you also see grease pooling on the floor under the washer, that's more likely a transmission gearcase leak than this clutch — and if the agitator only slips in one direction, check the agitator bolt before assuming the clutch has failed.
Common Problems This Part Fixes
Clothes coming out wet even after a completed spin cycle
Slight burning odor during operation
Washer having trouble spinning or agitating
Reduced washer performance from clutch wear
Grinding or unusual noise tied to the transmission area
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer clutch directly replaces the following OEM and cross-reference part numbers:
WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This clutch is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform.
Note: This clutch is commonly replaced alongside our WH03X30517 shift actuator, since the two work together in the same wash/spin transition system, but they are sold separately. If your washer also isn't switching between agitation and spin, check the actuator as well. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement clutch — engages and disengages the transmission during wash and spin
Resolves "clothes still wet," "burning odor," and "trouble spinning or agitating" symptoms
White plastic, glossy finish
Approximately 3"L x 3"W x 1"H
Direct drop-in replacement matching the original mounting
Replaces WH05X24185, 4588013, AGE26046, AP5993402, EAP11729473, PD00043605, PS11729473
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Sold individually
Product Specifications
Part Number
XPWH05X24185
OEM Part Number
WH05X24185
Part Type
Washer Clutch
Condition
Aftermarket Replacement
Color
White
Material
Plastic
Finish
Glossy
Dimensions
Approx. 3"L x 3"W x 1"H
Related Part
WH03X30517 shift actuator (sold separately)
Repair Difficulty
Moderate — some disassembly required
Quantity
1 clutch (sold individually)
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power at the outlet before beginning to cut off electricity and prevent accidental shocks. Wear work gloves. Remove the two screws at the back of the washer with a Phillips head screwdriver, then pull off the main console and carefully set it aside. Locate the access plate on the transmission side and remove the screws securing it. Take the belt off the pulley and remove the belt guard. Remove the four screws that secure the clutch and take it off from the wet end of the transmission. Install the new WH05X24185 clutch and replace the four screws. Reattach the belt, pulley, and access plate, and replace their screws. Put the main console back onto the washer and secure it with the two screws. Restore power and run a test cycle to confirm clothes are coming out properly damp at the end of the spin cycle, with no burning odor or unusual noise. Tools needed: Phillips screwdriver, socket wrench, work gloves.
Frequently Asked Questions
My clothes come out wet after the spin cycle. Is this the clutch I need?
Yes, this is one of the most common symptoms of a worn or failing clutch. Since this clutch is what engages the transmission to spin the basket at high speed, a worn clutch can slip rather than fully engaging, leaving clothes wetter than they should be at the end of the cycle. A slight burning odor during operation is another documented sign of the same wear.
I noticed grease on the floor under my washer. Is that this clutch leaking?
Not directly — grease pooling under the washer typically comes from the gearcase transmission itself rather than the clutch. If you're seeing this symptom, the transmission may need attention in addition to, or instead of, this clutch, depending on what else you're experiencing.
My agitator slips going one direction but not the other. Is that the clutch?
Not necessarily. This specific symptom — the agitator pulling fine in one direction but slipping in the other — is more often traced to a loose agitator bolt. It's worth checking and tightening that bolt first; if the problem persists, the agitator base hybrid assembly may need inspection before assuming this clutch is at fault.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the material, dimensions, and mounting configuration of the original WH05X24185 clutch used in compatible GE, Hotpoint, Haier, Monogram, and Café top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
WH42X10650 Washer Control Panel, White
Replaces Part Numbers: WH42X10650, AP3995175, 1264621, AH1482468, EA1482468, PS1482468.
The WH42X10650 is a genuine GE replacement part, specifically designed as a control panel for GE washing machines. It houses and operates the control buttons and display, ensuring compatibility and reliability for your appliance.
6600JB3001C Refrigerator Dispenser Switch – Replacement for GE, LG and Kenmore
Product Overview
This Dispenser Switch is a replacement part for specific LG, Kenmore, GE refrigerator models. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use.
Replaces Part Numbers
This dispenser switch replaces part numbers 6600JB3001C, 1268245, 1395586, 6600JB3001B, 6600JB3001H, PD00025340, EAP3529276, AH3529276, EA3529276, AP4441530, PS3529276, WR23X10783, 2695743, WR23X10171, WR23X10224, AP5688654, PS8259956.
Engineered to deliver OEM-level performance and compatibility.
Compatible Brands
Compatible with LG and Kenmore refrigerators manufactured by LG. Fits various French door, side-by-side, and bottom-freezer models with front panel dispensers.
Fixes the Following Issues
Water or ice dispenser not working
Dispenser works only when pressed a certain way
No power reaching water or ice components
Intermittent or unresponsive dispenser control
Why Buy from Parts‑O‑Matic
Durable and reliable aftermarket replacement
Fast and free U.S. shipping
Simple to install with plug-in compatibility
Trusted by appliance repair techs and homeowners
(4 Pack) XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE
Product Description
Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing.
Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277.
Compatibility:
Compatible with models including but not limited to:
LG: LSC24971ST/00, LRSC21934SW
Kenmore: 79571039010, 79571039011, 79578789801
GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers.
🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals.
💪 Reliable Performance: Ensures precise activation of ice and water dispensing.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues.
Product Specification
Part Number: XPARTCO 6600JB3001E
Component Type: Refrigerator dispenser micro switch
Material: Plastic housing, metal contacts
Electrical Rating: 16A 1/2HP, 125/250VAC
Mounting: Snap-in or screw-mounted, 1/4" terminals
Operating Conditions: Suitable for refrigerator dispenser environments
Compliance: UL listed, Prop 65 warning for California.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today!
Add to cart now for a reliable fix!
XPARTCO W10605427 Washer Drain Pump
The XPARTCO W10605427 is an aftermarket replacement washer drain pump for select Whirlpool, Maytag, Amana and Crosley washers, replacing Whirlpool parts W10605427 and WPW10605427. The drain pump removes wastewater from the washer during the drain portion of the cycle. When it fails, the washer may not drain, may leak near the pump, may make unusual noise, or may pump but not spin.
This pump replaces many earlier Whirlpool pump numbers, so the new pump may look different from your original. It is sold individually, without accessories or wire harnesses. Check your model number before ordering.
Quick Answer
The XPARTCO W10605427 Drain Pump replaces the drain pump on a compatible Whirlpool, Maytag, Amana or Crosley washer when it has failed. Replaces W10605427, WPW10605427, W10425238 and several other Whirlpool pump numbers. Classic symptoms: the washer won't drain, leaks, or makes unusual noise.
Common Problems This Part Fixes
Washer won't drain, or keeps water after the cycle
Water leaking near the pump
Unusual noises during draining
Washer pumps but won't spin
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This drain pump directly replaces the following part numbers:
WPW10605427, WPW10425238, W10425238, W10605427, W10799064, W10799065, W10903216, W10918044, W10365896, B40-3A, AP6023357, AWP51154, EAP11756700, PD00038328, PS11756700
If your old pump shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This drain pump is listed for Whirlpool, Maytag, Amana and Crosley washers, including these examples:
Maytag MHW3000BW2, MHW3500FW0, MHW4300DC0, 7MMHW5500FW0
Whirlpool WFW87HEDC0, WFW95HEDC0, 7MWFW75HEFW0, 7MWFW90HEFW0
Crosley CFWH4084GW0
Note: The models above are a small sample of about 30 that retailers list, not a full list. Similar-looking pumps can differ in size and shape, so check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Aftermarket replacement for the Whirlpool W10605427 / WPW10605427 drain pump
Pumps wash water out of the washer during the drain cycle
Replaces many earlier Whirlpool drain pump numbers
Sold individually
Product Specifications
Part Number
W10605427
OEM Part Number
WPW10605427
Part Type
Washer Drain Pump
Condition
Aftermarket Replacement
Quantity
1 Pump
Application
Select Whirlpool, Maytag, Amana & Crosley Washers
Installation Notes
⚠️ Unplug Power And Shut Off Water Before Installing Unplug the washer and turn off the water supply before you begin, and wear work gloves. The pump is at the bottom of the washer, and installation involves partially disassembling it, so moving the washer away from the wall helps. Remove the bottom or back panel and drain any remaining water. Disconnect the drain hose and electrical plug, remove the mounting bolts, and take out the old pump. Fit the new pump, reconnect the hose and plug, and refit the panel. Restore power and water and run a drain cycle, checking for leaks.
Frequently Asked Questions
My washer won't drain. Is this the part I need?
It can be, but a clogged hose or filter, or other parts, can cause the same symptom. Check for blockages first, and test the pump for continuity with a multimeter before replacing it. If the pump runs continuously, the water level switch may be the cause, so check that as well.
Is this an OEM or aftermarket part?
This is an aftermarket replacement from XPARTCO, made to replace Whirlpool parts W10605427 and WPW10605427. If you specifically need a genuine Whirlpool part, contact our support team.
Will the pump look the same as my old one?
Not necessarily. This pump replaces many earlier Whirlpool pump numbers, so it can look different from the original while still being the correct replacement. Match the part number and your model number.
Will this fit my washer?
It is listed for about 30 Whirlpool, Maytag, Amana and Crosley models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 131763310 Washer Door Striker
The XPARTCO 131763310 is an aftermarket replacement door striker (also called a door strike or door catch) compatible with select Frigidaire, Kenmore, Electrolux, Crosley, Gibson, White-Westinghouse, Kelvinator, and Tappan front-load washers. The door striker is a small plastic tab mounted on the washer door that engages with the door lock assembly on the front of the washer when the door is closed — activating the door switch and allowing the washer to start, fill, and spin. When the striker breaks or wears down, the door will not properly activate the door lock, causing the washer not to start, not to fill, or to display a door-related error code.
Made from durable white plastic, this striker measures approximately 1-1/4" L x 9/16" W x 2-9/16" H with approximately 2 inches between mounting holes (center to center). It directly replaces 131763300, 134456600, 1032664, LP3310, AP3580441, and several additional cross-reference numbers. Sold individually. Installs in under 15 minutes with a Phillips screwdriver.
Quick Answer
The XPARTCO 131763310 Washer Door Striker fixes Frigidaire-platform front-load washers where the door won't activate the door lock, the washer won't start, won't fill, leaks from the door, or shows a door-related error code. White plastic, approx. 1-1/4" L x 9/16" W x 2-9/16" H, ~2" between mounting holes. Sold individually. Phillips screwdriver only — installs in under 15 minutes. Compatible with Frigidaire, Kenmore, Electrolux, Crosley, Gibson, and more.
Common Problems This Part Fixes
Washer door will not properly latch or activate the door lock when closed
Washer will not start — door switch not being triggered by the striker
Washer will not fill with water — door lock not engaged
Washer will not spin — door lock fault preventing cycle completion
Water leaking from the door area due to door not sealing properly
Door-related error codes displayed on compatible models
Broken, cracked, or missing door striker visible on the washer door
Replaces Part Numbers
This door striker directly replaces the following OEM and cross-reference part numbers:
131763310, 134456600, 131763302, 1032664, 131763300, AH890617, EA890617, AP3580441, PS890617, AFR14210, PD00000391, EAP2378364, AP4508273, PS2378364, WH10X10004, 824421, AH269392, EA269392, AP2621447, PS269392.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door striker is compatible with select front-load washers from the following brands:
Frigidaire front-load washers (ATF, ATFB, BLTF, GLTF, LTF, FTF, FAFW, FRFW series and more)
Kenmore / Sears front-load washers (select Frigidaire-built models)
Electrolux front-load washers (select models)
Crosley front-load washers (CFW, CLCE series)
Gibson front-load washers (GTF series)
White-Westinghouse front-load washers
Kelvinator front-load washers
Tappan front-load washers
Note: The 131763310 (white) and 131763302 (gray) are interchangeable and functionally identical — the only difference is color. Either part will work as a replacement regardless of which color was originally installed.
Key Features
Engages with the door lock assembly to activate the door switch, allowing the washer to start, fill, and run
Critical safety component — washer will not operate without a properly functioning door striker
Durable white plastic construction — strong and wear-resistant for long service life
Dimensions: approx. 1-1/4" L x 9/16" W x 2-9/16" H; ~2" between mounting holes (center to center)
Sold individually — one striker per order
Direct replacement for 131763300, 134456600, 1032664, and LP3310
Compatible with Frigidaire, Kenmore, Electrolux, Crosley, Gibson, White-Westinghouse, Kelvinator, and Tappan washers
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in under 15 minutes with a Phillips screwdriver only
Product Specifications
Part Number
131763310
Part Type
Washer Door Striker (Door Strike / Door Catch)
Condition
Aftermarket Replacement
Application
Front-Load Washers
Dimensions
Approx. 1-1/4" L x 9/16" W x 2-9/16" H
Mounting Hole Spacing
Approx. 2" center to center
Color
White
Material
Plastic
Sold As
Single striker
Compatible Brands
Frigidaire, Kenmore, Electrolux, Crosley, Gibson, White-Westinghouse, Kelvinator, Tappan
Installation Notes
⚠️ Unplug Washer Before Starting Disconnect power before beginning any repair. Open the washer door and locate the door striker — it is the small plastic tab mounted on the inside of the door, typically near the top or center of the door panel. Remove the two Phillips screws securing the old striker to the door. If the striker is broken, the screws may already be loose or missing. Align the new 131763310 striker with the mounting holes in the door and secure it with the two Phillips screws. Close the door to confirm it clicks firmly into the door lock assembly. Restore power and run a short cycle to verify the washer starts, fills, and runs normally. Tools needed: Phillips screwdriver only.
Frequently Asked Questions
What does the washer door striker do?
The door striker is the small plastic tab on the washer door that engages with the door lock assembly mounted on the front of the washer when the door is closed. As the door closes, the striker pushes into the door lock, activating the door switch — a signal to the control board that the door is securely closed. The washer will not start, fill, or spin unless the door switch is activated by the striker. A broken or worn striker means the door lock is never properly engaged, so the washer appears to be in a constant "door open" state even when the door is physically shut.
What is the difference between the 131763310 and 131763302 door strikers?
Both are Frigidaire-platform door strikers, they are different color and interchangeable. The 131763310 is used on older Frigidaire front-load washer models (ATF, GLTF, FAFW series and others). The 131763302 is a gray color used on newer Frigidaire and Electrolux models. Always compare your existing striker's shape and dimensions to confirm, or contact our support team with your model number.
Should I also replace the door lock assembly when replacing the striker?
Not necessarily — in most cases the striker is the only part that needs replacement. The striker is a small plastic tab that takes repeated impact every time the door is closed, making it the most commonly worn part in the door latch system. The door lock assembly (131763202) is more durable and less prone to failure. Inspect the door lock for any cracks, burn marks, or a latch that does not spring back after pressing — if it appears damaged, replace it as well. If the lock looks intact, the 131763310 striker alone should resolve the issue.
My washer door closes but the washer still won't start — is it the striker?
It may be. If the striker is cracked, worn, or broken, it may appear to engage the door lock but not push far enough into the lock assembly to fully activate the door switch. In other cases, a fully intact striker may not be the cause — the door lock assembly itself (131763202) or the door latch on the frame side may also be the culprit. Visually inspect the striker first — if it is visibly broken, replace it. If it appears intact, the issue may be with the door lock assembly or wiring.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured from durable plastic to match the dimensions and function of the original 131763310 door striker.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO WE04X24719 Dryer Start Button
The XPARTCO WE04X24719 is an aftermarket replacement power and start button assembly for GE and Hotpoint dryers. You push it to power up the dryer's controls and begin the drying cycle. When the button is cracked, stuck, or no longer registers a press, the dryer won't start, even though the rest of the machine is fine.
This is a direct-fit aftermarket replacement for the original GE button assembly. The button mounts through the control panel and onto the switch shaft behind it, so if the dryer still won't start with a new button, the push-to-start switch itself may also need to be checked.
Quick Answer
The XPARTCO WE04X24719 Start Button fixes a GE or Hotpoint dryer whose start button is broken, stuck, or doesn't start the dryer when pressed. Classic symptom: you press start and nothing happens, or the button feels loose, cracked, or no longer springs back.
Common Problems This Part Fixes
Dryer won't start when the start button is pressed
Start button is cracked, broken, or missing
Button feels loose, stuck, or doesn't spring back
Button no longer lines up with the switch behind the panel
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This start button assembly directly replaces the following part number:
WE04X24719, AGE24894, AP6034220, EAP11766637, 4587500, PD00046802, PS11766637
No other GE part numbers were confirmed for this button. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This start button is listed for GE and Hotpoint dryers, including these examples:
5TX62E9ST0WS, ETD48EASW0WB
GTD33EASK0WW, GTD42EASJ2WW, GTD48EASW0WB
GTD45GASJ0WS (gas)
Note: The models above are a sample of about 40 listed dryers, not a full list. This is the button assembly that fits onto the switch shaft, not the switch itself. Confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Direct-fit aftermarket power and start button assembly for GE and Hotpoint dryers
Restores a working push-to-start button
Fits electric and gas dryer models
Straightforward repair, typically 30 minutes to 1 hour
Product Specifications
Part Number
XPWE04X24719
OEM Part Number
WE04X24719
Part Type
Dryer Power and Start Button Assembly
Condition
Aftermarket Replacement
Application
GE & Hotpoint Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. The button is held to the switch behind the control panel, so you will need to remove the back panel, the wires, and the switch to take the old button out through the panel, as shown in your model's service guide. Note where each wire connects before removing it. Fit the new button through the panel onto the switch shaft, then reassemble in reverse order.
Frequently Asked Questions
My dryer won't start when I press the button. Is this the part I need?
If the button is cracked, loose, or doesn't press the switch, yes. If the button looks fine, the push-to-start switch behind it, the door switch, or a thermal fuse can cause the same symptom, so check those too.
Does this include the switch?
This listing is for the button assembly that fits onto the switch shaft, not the switch. If the switch itself has failed, it is a separate part.
Do I need to take the dryer apart?
Yes. The button is installed through the control panel, so the back panel, wires, and switch have to come off to replace it. Customers report about 30 minutes to 1 hour.
Will this fit my dryer?
It is listed for many GE and Hotpoint dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WPW10185972 Dryer Timer
The Genuine OEM Whirlpool WPW10185972 is the dryer timer, the electromechanical control that advances through your dryer's preset cycles. Its internal contacts open and close the circuits that control heat and the drum motor, so the dryer runs for the right amount of time at the right setting. When the timer fails, the dryer may not start, may not advance through the cycle, or may over-dry or under-dry your clothes.
This is the original Whirlpool part, also sold under the older number W10185972. It is listed for Whirlpool-built electric dryers sold as Whirlpool, Maytag, Amana, Admiral, Roper, Inglis, and Crosley. Check the part number before ordering, because a similar timer, WPW10185971, is listed for different models.
Quick Answer
The Genuine OEM WPW10185972 Dryer Timer fixes a Whirlpool-built electric dryer that won't start, won't advance through its cycle, or over-dries or under-dries because the timer has failed. It is also listed as W10185972. Classic symptom: the dial turns but the dryer doesn't run or doesn't engage all the cycle selections.
Common Problems This Part Fixes
Dryer won't start or won't turn on
Dryer doesn't engage all cycle selections
Dryer over-dries or under-dries clothes
Timer dial doesn't advance through the cycle
Heat or motor runs at the wrong time in the cycle
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer timer directly replaces the following part numbers:
WPW10185972, W10185972, 1481701, WPW10185972VP, 418-617-20-B5, AP6016537, AWP49431, EAP11749827, PD00002683, PS11749827
W10185972 is the older Whirlpool number. No other cross-reference numbers were confirmed. The similar timer WPW10185971 is a different part and is not listed as interchangeable. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number.
Compatibility
This timer is listed for Whirlpool, Maytag, Amana, Admiral, Roper, Inglis, and Crosley electric dryers, including these examples:
Whirlpool 4KWED4750BQ1, Maytag 4KMEDC100BQ1, Amana 4KNED4400BQ1, Amana NED5100TQ1
Admiral AED4475TQ1, YAED4475TQ1, Crosley CEDX631VQ1
Inglis IED4400VQ1, YIED4400VQ1, Roper RED4400VQ1, RED4440VQ1, YRED4340SQ2
Note: The models above are a sample from one retailer, not a full list. A similar timer, WPW10185971, is listed for different dryer models (such as Admiral AGD4475TQ1 and Amana NGD5100TQ1), so check which number your model calls out. Confirm your model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Whirlpool dryer timer
Advances through preset cycles and switches heat and motor circuits
Also listed under the older number W10185972
Resolves no-start, cycle-advance, and over- or under-drying problems
Fits Whirlpool-built electric dryers sold under many brand names
Product Specifications
Part Number
WPW10185972
OEM Part Number
WPW10185972
Part Type
Dryer Timer
Condition
Genuine OEM
Application
Whirlpool-Built Electric Dryers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning, and wear work gloves. Remove the control panel as shown in your model's service guide to reach the timer. Before disconnecting anything, photograph the wire connections or note the position of each wire, since the timer has many terminals. Move the wires one at a time to the new timer, mount it, replace the knob, and restore power. Test each cycle selection before closing the dryer.
Frequently Asked Questions
My dryer won't start. Is this the part I need?
A failed timer is a common cause, especially if the dial turns but the dryer doesn't run or doesn't engage every cycle selection. The door switch, start switch, and thermal fuse can cause the same symptom, so check those first.
Is WPW10185972 the same as W10185972?
Yes. W10185972 is the older Whirlpool number for the same timer, and this part covers both numbers.
Can I use WPW10185971 instead?
No, don't assume so. WPW10185971 is a separate timer listed for different models. Use the number your model calls out, or contact our support team to confirm before ordering.
Will this fit my dryer?
It is listed for many Whirlpool-built electric dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11457841 Washer Lid Latch Strike
The XPARTCO W11457841 is an aftermarket replacement washer lid latch strike compatible with select Whirlpool, Maytag, and Kenmore HE top-load washers — including the Whirlpool WTW5100, WTW5105, WTW6120, WTW7120, WTW8120, WTW8127 series, and the Maytag MVW6200, MVW6230, MVW7230, MVW7232, MVW8230 series. The lid latch strike is the plastic component attached to the underside of the washer lid that physically engages the lid lock mechanism when the lid is closed. As the lid lowers into place, the latch strike enters the lock slot and activates the lid switch — signaling the control board that the lid is securely closed and the washer is safe to start agitation and spin.
When the lid latch strike fails — typically by breaking off, cracking, or wearing down — the lid lock can't be properly activated, and the washer will not start, will stop mid-cycle, or will refuse to advance to the spin cycle. This W11457841 aftermarket replacement is built to OEM-equivalent specifications and supersedes the earlier W11091027. It also replaces 4959179, AP6987306, EAP16218028, PD00061788, and PS16218028. Installation is fast and simple — a counterclockwise twist removes the old strike, and a clockwise twist installs the new one. Installs in under 5 minutes, no special tools required.
Quick Answer
The XPARTCO W11457841 Washer Lid Latch Strike fixes Whirlpool, Maytag, and Kenmore HE top-load washers that won't start, won't lock the lid, stop mid-cycle, or won't advance to spin because the lid strike is broken or worn. Plastic latch strike that attaches to the underside of the washer lid and activates the lid lock and switch. Twist-in installation. Genuine OEM. Replaces W11091027, 4959179, AP6987306, EAP16218028, PD00061788, PS16218028. Compatible with Whirlpool WTW5100/5105/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series.
Common Problems This Part Fixes
Washer not starting — lid latch strike not engaging the lid lock
Lid won't lock at the start of the cycle
Washer stops mid-cycle with a lid-related fault
Washer fills with water but won't agitate or advance to spin
Lid latch strike visibly broken, cracked, or missing on the underside of the lid
Latch strike worn down — physically fits the lock slot but no longer activates the lid switch
Repeated lid lock errors despite the lid appearing to close normally
Replaces Part Numbers
This washer lid latch strike directly replaces the following OEM and cross-reference part numbers:
W11457841, W11091027, AP6987306, AWP44638, PD00061788, EAP16218028, PS16218028.
W11457841 is the current production part superseding W11091027. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This lid latch strike is compatible with select HE top-load washers from the following brands and series:
Whirlpool top-load washers — WTW5100HC0, WTW5100HC1, WTW5100HC2, WTW5100HW0, WTW5100HW1, WTW5100HW2 series
Whirlpool top-load washers — WTW5105HC0, WTW5105HC1, WTW5105HC2, WTW5105HW0, WTW5105HW1, WTW5105HW2 series
Whirlpool top-load washers — WTW6120HC0, WTW6120HC1, WTW6120HC2, WTW6120HW0, WTW6120HW1, WTW6120HW2 series
Whirlpool top-load washers — WTW7120HC0, WTW7120HW0 series
Whirlpool top-load washers — WTW8120HC0, WTW8120HW0 series
Whirlpool top-load washers — WTW8127LC0, WTW8127LC1, WTW8127LW0 series
Maytag top-load washers — MVW6200KW0, MVW6200KW1, MVW6200KW2, MVW6200KW3 series
Maytag top-load washers — MVW6230HC0, MVW6230HC1, MVW6230HC2, MVW6230HW0, MVW6230HW1, MVW6230HW2 series
Maytag top-load washers — MVW6230RHW0, MVW6230RHW1, MVW6230RHW2 series
Maytag top-load washers — MVW7230HC0, MVW7230HW0, MVW7230HW1 series
Maytag top-load washers — MVW7232HC0, MVW7232HW0, MVW7232HW2 series
Maytag top-load washers — MVW8230HC0 series
Kenmore / Sears top-load washers (Whirlpool-built — select 110-series models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Aftermarket replacement built to OEM-equivalent quality standards — direct fit for compatible Whirlpool platform washers
Plastic latch strike attaches to the underside of the washer lid and engages the lid lock mechanism when the lid closes
Activates the lid switch to signal the control board that the lid is securely closed and the washer is safe to start
Twist-in/twist-out installation — no tools or hardware required; counterclockwise to remove, clockwise to install
Current production part — directly supersedes W11091027
Replaces W11091027, 4959179, AP6987306, EAP16218028, PD00061788, and PS16218028
Compatible with Whirlpool WTW5100/5105/6120/7120/8120/8127 and Maytag MVW6200/6230/7230/7232/8230 series HE top-load washers, plus select Kenmore Whirlpool-built models
Fast DIY repair — installs in under 5 minutes
Product Specifications
Part Number
W11457841
Supersedes
W11091027
Part Type
Washer Lid Latch Strike
Condition
Aftermarket Replacement
Application
HE Top-Load Washers (Whirlpool/Maytag/Kenmore platform)
Material
High-strength plastic
Installation
Twist-in (clockwise) / twist-out (counterclockwise) — no tools required
Mounting Location
Underside of washer lid
Compatible Brands
Whirlpool, Maytag, Kenmore
Installation Notes
⚠️ Unplug Washer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves to protect your hands. Open the washer lid and locate the lid latch strike on the underside of the lid — it's the small plastic peg that drops into the lock slot when the lid is closed. To remove the old latch strike: rotate it counterclockwise until the retaining tab breaks free and pulls back, then pull the old latch strike straight out. To install the new W11457841: align it with the mounting hole in the same orientation as the old one, and rotate clockwise until you hear or feel the retainer tab click into place. Close the lid and confirm the latch strike engages the lock slot properly. Restore power, start a test cycle, and confirm the lid locks and the washer begins normal operation. Tools needed: work gloves only — no tools required for the strike itself.
Frequently Asked Questions
What's the difference between the lid strike, lid lock, and lid switch?
These three components work together as a safety system. The lid latch strike (W11457841) is the small plastic peg attached to the underside of the lid that physically enters the lock slot when the lid closes. The lid lock is the mechanism in the washer cabinet that grips the strike and physically locks the lid closed during the spin cycle. The lid switch is the electrical sensor inside the lock assembly that signals the control board when the strike is engaged. If the strike is broken or missing, none of the three can do their job — even if the lock and switch are working perfectly. Replacing just the strike often resolves "won't start" issues without needing to replace the more expensive lock assembly.
What is the difference between W11457841 and W11091027?
These are the same lid latch strike across production revisions. W11091027 was the earlier OEM part number, and W11457841 is the current part number that superseded it. Both are physically and functionally identical — if your washer's parts diagram shows W11091027, the W11457841 is the correct current replacement, and this aftermarket part covers both numbers.
My washer won't start and the lid seems to close normally — could this be the strike?
Yes, this is one of the most common symptoms of lid latch strike failure on compatible Whirlpool and Maytag washers. Even though the lid appears to close, if the strike has cracked or worn down it may not physically engage the lock or activate the switch correctly. Visually inspect the latch strike on the underside of the lid — if it's broken, missing, or chipped, replacement is straightforward. If the latch strike looks intact and the washer still won't start, the lid lock assembly itself or the wiring harness may need attention.
Do I really not need any tools to install this?
Correct — the W11457841 lid latch strike uses a twist-in design with no screws or hardware. To remove the old latch strike, rotate it counterclockwise until the internal retaining tab breaks free, then pull it out. To install the new one, push it into the mounting hole and twist clockwise until it clicks into place. The whole replacement typically takes under 5 minutes once you have the new part in hand. Work gloves are recommended to protect your hands while gripping the small plastic part, but no other tools are needed.
Is this a Genuine OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the dimensions, twist-in mounting design, and lid switch activation function of the original W11457841 lid latch strike used in compatible Whirlpool, Maytag, and Kenmore HE top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
3148953CM Surface Burner Infinite Switch
240V, 7.5-9.3A
switch for 8" elements.
Fits specific Whirlpool electric ranges.
Replaces Part Numbers: WP3148953, 3148953, 492439, AP6007658, PS11740775, WP3148953VP.
Description The Infinite Control Switch is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise adjustment of the heat level, enabling users to achieve the perfect temperature for various cooking techniques, from simmering to boiling. Causes of a bad Infinite Control Switch can range from electrical issues, such as short circuits or worn contacts, to mechanical failures within the switch itself.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DC31-20014C Washer Genuine OEM Shift Actuator
This clutch (part number DC31-20014C) is for washers. Clutch DC31-20014C spins the basket during the spin cycle.
Fits specific Samsung washer Models
Replaces Part Numbers:DC31-20014C, 2068406, AP4211210, PS4204941.
California Residents only: WARNING: California’s Proposition 65
