WR9X502 Refrigerator Genuine OEM Defrost Timer
Description: This Defrost Timer is an OEM part for GE refrigerators. This part manages the defrost cycle of the fridge and freezer compartments, ensuring that the evaporator coils do not build up excessive frost. This cycling is crucial for maintaining optimal temperatures for food preservation and energy efficiency. Over time, the defrost timer can malfunction due to wear, electrical issues, or a buildup of dust and debris, leading to poor performance or failure.
Replaces Part Numbers:WR9X502, WR09X10049, WR09X0278, WR09X0283, WR09X0313, WR09X0329, WR09X0334, WR09X0339, WR09X0342, WR09X0350, WR09X0356, WR09X0363, WR09X0364, WR09X0366, WR09X0375, WR09X0387, WR09X0408, WR09X0409, WR09X0418, WR09X0419, WR09X0428, WR09X0432, WR09X0438, WR09X0466, WR09X0468, WR09X0470, WR09X0478, WR09X0479, WR09X0481, WR09X0484, WR09X0486, WR09X0487, WR09X0490, WR09X0495, WR09X0502, WR09X0503, WR09X0504, WR09X0526, WR09X0528, WR09X0576, WR09X0594, WR09X5161, WR09X5162, WR09X5163, WR09X5164, WR09X5192, WR09X5202, WR09X5204, WR09X5211, WR09X5225, WR9X10049, AH310869, EA310869, AP2061708, PS310869.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
OE WR60X10220 Refrigerator Condenser Fan Motor
The OE WR60X10220 is an Original Equipment condenser fan motor for GE-built refrigerators, sourced from the same original manufacturer that supplies this motor for genuine GE production, and shipped in XPARTCO packaging rather than GE retail packaging. The condenser fan motor pulls air across the condenser coils and compressor to dissipate heat, and on many models it also helps evaporate condensate that collects in the drain pan below the compressor. When this motor fails or weakens, the compressor and coils can't shed heat properly, leading to a refrigerator that runs constantly, doesn't cool adequately, or develops a squealing/screeching noise as the motor bearings wear.
It directly replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Located in the rear compressor compartment behind the refrigerator's rear access panel. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The OE WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, and Kenmore (GE-built) refrigerators that run constantly, don't cool adequately, or make a squealing/screeching noise from the compressor compartment. This is an Original Equipment motor — same manufacturer as genuine GE production, packaged as XPARTCO rather than GE retail packaging. 115V. Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220. Classic symptom: loud squealing or screeching noise coming from behind the fridge.
Common Problems This Part Fixes
Refrigerator runs constantly and doesn't cycle off normally
Fridge or freezer not cooling adequately or running warm
Loud squealing, screeching, or grinding noise from the rear compressor compartment
Compressor overheating or shutting off on thermal protection
Water pooling under the refrigerator from an overwhelmed drain pan
Condenser fan blade not spinning, or spinning slowly/intermittently
What Is an OE Part?
OE ("Original Equipment") parts are sourced from the same original manufacturer that supplies the component for genuine factory production — not a different aftermarket maker. The difference from a "Genuine OEM" listing is packaging: an OE part ships in XPARTCO packaging instead of the appliance brand's retail box, at a lower cost, while the part itself comes off the same production line. OE is a separate designation from our XPARTCO aftermarket brand and is never labeled with an XPARTCO prefix.
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This condenser fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with a wide range of GE-built refrigerators from the following brands:
GE refrigerators (including GSL22JFPDBS-BS, GSS25WGPHBB, GSL25JFPHBS, and related side-by-side and bottom-freezer models)
Hotpoint refrigerators (GE-built models, including HSM25GFRFSA)
RCA refrigerators (GE-built models)
Kenmore refrigerators (select GE-built models)
Note: This motor is used across a large number of GE-platform refrigerator models. Always verify your appliance model number before ordering, since evaporator fan motors and condenser fan motors are different components that are easy to confuse — an evaporator fan sits inside the freezer compartment, while this condenser fan sits in the rear compressor compartment.
Key Features
Original Equipment condenser fan motor — same manufacturer source as genuine GE production
Resolves "runs constantly," "not cooling," and "squealing noise" symptoms caused by motor failure
Pulls air across the condenser coils and compressor to dissipate heat
Helps evaporate excess condensate collecting in the drain pan on many models
115V rated motor matching original electrical specifications
Replaces WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220
Compatible with GE, Hotpoint, RCA, and Kenmore refrigerators
Same production source as the genuine part, in XPARTCO packaging at a lower cost
Product Specifications
Part Number
WR60X10220-OE
OEM Part Number
WR60X10220
Part Type
Refrigerator Condenser Fan Motor
Condition
Original Equipment (OE) — XPARTCO Packaging
Voltage
115V
Location
Rear Compressor Compartment
Function
Cools condenser coils/compressor; assists drain pan evaporation
Compatible Brands
GE, Hotpoint, RCA, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power before beginning. Pull the refrigerator away from the wall and remove the rear access panel over the compressor compartment (typically several screws around the perimeter). Locate the condenser fan motor and blade near the compressor. Photograph the wiring before disconnecting. Unplug the motor's wiring harness connector. Remove the mounting screws or bracket clip holding the motor in place, and note the orientation of the fan blade on the motor shaft before removing it — the blade must be reinstalled facing the same direction to move air correctly. Transfer the fan blade to the new WR60X10220 motor, or install the blade included with your kit in the same orientation. Mount the new motor in the same position and secure it. Reconnect the wiring harness, matching your photos. Reinstall the rear access panel, restore power, and confirm the fan spins freely and the compressor area cools down normally after running. Tools needed: nut driver or screwdriver, needle-nose pliers (for wiring connectors).
Frequently Asked Questions
What's the difference between this OE part and a "Genuine OEM" listing?
Both come from the same original manufacturer as factory production — the difference is packaging and price. A Genuine OEM listing ships in the appliance brand's own retail box; this OE part ships in XPARTCO packaging at a lower cost, with no difference in the motor itself.
My fridge is making a loud squealing noise — is this the part I need?
Very likely, yes. A squealing or screeching noise from behind the refrigerator, especially one that gets louder over time, is one of the most common symptoms of a failing condenser fan motor as its bearings wear out. Pull the unit out and listen near the rear compressor compartment to confirm the noise is coming from that area before ordering.
Is this the same as an evaporator fan motor?
No — these are different components serving different purposes, and it's easy to order the wrong one. The evaporator fan motor is inside the freezer compartment and circulates cold air through the fridge and freezer. This condenser fan motor is in the rear compressor compartment and cools the compressor and condenser coils. Confirm which one your model uses based on symptoms and location before ordering.
Do I need to transfer the fan blade from my old motor?
On many models, yes — the fan blade is a separate component that mounts onto the motor shaft, and you'll transfer it from the old motor to the new one, noting its orientation first. Some kits include a new blade; check what's included with your specific motor before starting the repair.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Original Equipment Source ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM 4317943 Refrigerator Ice Maker Kit
The 4317943 is a genuine OEM ice maker assembly kit from Whirlpool for Whirlpool-built refrigerators sold under the Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Roper, and related names. The ice maker is the unit in the freezer that fills with water, freezes it, and ejects the cubes into the ice bin. Over time, contacts corrode and the mechanism wears out, and the refrigerator may make little or no ice, make too much, or leak water from the unit.
This is a complete replacement ice maker, so you swap the whole unit rather than hunting for a failed internal component. As a genuine OEM part, not an aftermarket equivalent, it matches the original factory fit and specification. The kit does not include the shut-off arm. Transfer the arm from your original ice maker, or order the arm for your model.
Quick Answer
The Genuine OEM 4317943 Ice Maker Kit fixes a Whirlpool-built refrigerator that is not making ice, making too little or too much ice, or leaking from the ice maker. Complete ice maker assembly, genuine OEM from Whirlpool, 120 V. Classic symptom: the ice bin stays empty even though the water supply, filter and freezer temperature are all fine.
Common Problems This Part Fixes
Ice maker not making ice
Ice maker producing too little ice, or too much
Ice maker not dispensing ice into the bin
Water leaking from the ice maker
Corroded contacts or a worn-out mechanism
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice maker kit replaces the following part numbers:
4317943, 1857, 4317943R, 4317943VP, 46000978556, 46004211173, 480616, 480617, 482014, 482015, 482016, 482017, 482018, 482019, 482020, 482394, 482433, 482990, 625601, 625603, 625610, 625611, 625622, 625625, 625653, 625656, 625660, 626002, 626201, 626237, 626366, 626461, 626489, 626608, 626609, 626626, 626640, 626670, 626687, 627572, 68972-4, 797991, 8114, 833701, 978552, 978553, 99989730, M626687, W10122496, W10190952, W10281545, W10632400, AP2984633, AH358591, AWP39706, EA358591, PD00002471, PS358591
This one kit replaced many Whirlpool ice maker numbers across decades of models. Match the number on your old ice maker or parts diagram against the list above. Distributor and catalog numbers are not shown here.
Compatibility
This ice maker kit is listed for refrigerators from the Whirlpool family of brands:
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper
Kenmore, including models such as 2537616800, 2537616820, and 2537618100
Note: The model list above is only a sample, since this kit fits a very large number of models. Confirm fit by matching the number on your old ice maker or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. The kit does not include the shut-off arm. If the wiring harness on the kit doesn't work with your refrigerator, you can reuse the harness from your existing ice maker.
Key Features
Genuine OEM Whirlpool ice maker assembly, not an aftermarket equivalent
Complete unit with plastic housing and metal ice tray
120 V, 60 Hz
Replaces corroded contacts and faulty assemblies in one swap
Replaces dozens of earlier Whirlpool ice maker numbers
Easy installation, typically 30–60 minutes with basic hand tools
Product Specifications
Part Number
4317943
OEM Part Number
4317943
Part Type
Refrigerator Ice Maker Assembly Kit
Condition
Genuine OEM
Manufacturer
Whirlpool
Voltage
120 V, 60 Hz
Materials
Plastic Housing, Metal Ice Tray
Not Included
Shut-Off Arm
Application
Select Whirlpool-Family Refrigerators
Installation Notes
⚠️ Unplug Power and Shut Off Water Unplug the refrigerator and turn off the water supply before starting. Empty the ice bin and remove it from the freezer. Following your model's service guide, remove the screws holding the old ice maker to the freezer wall, then disconnect its wiring harness and pull the unit free. Transfer the shut-off arm from the old unit to the new one. If the harness on the new kit doesn't match your refrigerator, reuse the harness from the old ice maker. Mount the new ice maker in the same position, reconnect the harness, and secure the screws. Restore water and power, and allow several hours for the first batch of ice. Tools commonly needed are a nut driver, a flat-blade screwdriver, and a Phillips screwdriver.
Frequently Asked Questions
My refrigerator isn't making ice. Is this the part I need?
It may be, if the water supply is on, the water filter is not clogged, and the freezer is cold enough. If the ice maker's contacts are corroded, it leaks, or it no longer cycles, replacing the whole unit is the simplest fix.
Does the kit include the shut-off arm?
No. Remove the shut-off arm from your original ice maker and fit it on the new one, or order the arm for your model.
The wiring harness on the new ice maker doesn't match mine. What do I do?
You can remove the harness from your existing ice maker and reuse it on the new unit.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for a very wide range of Whirlpool-family refrigerators. Match the number on your old ice maker against the Replaces list, or contact our support team with your model number and we'll confirm fit before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4681JB1029D Refrigerator Condenser Fan Motor – Compatible with LG and Kenmore Refrigerators
Product Description
Keep your refrigerator running efficiently with the XPARTCO 4681JB1029D Refrigerator Condenser Fan Motor. This Condenser Fan Motor is a replacement part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
Replaces Part Numbers
4681JB1029D, EAU61644104, 4681JB1029Q, 1267566, AH3523330, EA3523330, PD00008709, AP4437783, PS3523330.
Compatibility
This replacement condenser fan motor fits select LG and Kenmore refrigerators.
Example compatible models include (but are not limited to): LG LFX25974ST, LG LFX28968ST, and Kenmore 795.71053.010.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM performance for LG refrigerators
🌬️ Reliable Airflow – Circulates air over coils to prevent overheating and improve efficiency
💰 Cost-Effective Fix – Quality replacement at a lower cost than OEM parts
🛠️ DIY Installation – Plug-and-play wiring connector for easy setup
🛡️ Fixes Common Issues – Solves overheating, loud operation, or poor cooling problems
📐 Product Specification
Part Number: 4681JB1029D
Component Type: Refrigerator Condenser Fan Motor Assembly
Material: Metal motor housing with plastic fan blade
Mounting: Direct-fit on rear compressor compartment bracket
Operating Conditions: Designed for continuous operation in refrigerator environments
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Always unplug the refrigerator before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and pull refrigerator away from wall.
Remove the rear access panel to expose the condenser area.
Disconnect wiring harness and remove the old fan motor.
Mount the new 4681JB1029D motor using the same screws.
Reconnect the wiring harness and reinstall the rear panel.
Plug in the refrigerator and confirm proper fan operation.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your refrigerator cool and efficient — Add to Cart Now for a reliable, budget-friendly replacement!
Genuine OEM W11844302 Refrigerator Filter Head
The W11844302 is a genuine OEM water filter head assembly for Whirlpool refrigerators, and the current part number that supersedes the earlier W11808483. The filter head is the fitting inside the refrigerator that holds the water filter and routes incoming water through it to the water dispenser and ice maker. When the head cracks, leaks, or no longer seats the filter correctly, you can see water at the filter, lose flow to the dispenser or ice maker, or find the filter will not lock in or seal.
This is a genuine OEM part from Whirlpool, not an aftermarket equivalent, so the fit and the filter connection match what came with the refrigerator. It is the filter head only. The water filter itself is a separate part and is sold separately.
Quick Answer
The Genuine OEM W11844302 Filter Head fixes a Whirlpool refrigerator whose filter head is cracked, leaking, or no longer holding or sealing the water filter. Genuine OEM, the current number superseding W11808483 and a long list of earlier Whirlpool filter head numbers. Classic symptom: water dripping around the filter, a filter that won't lock in or seal, or reduced water flow to the dispenser and ice maker.
Common Problems This Part Fixes
Water leaking from or around the filter head
Water filter won't lock in or seal properly
Reduced or no water from the dispenser or ice maker traced to the filter head
Cracked, broken, or damaged filter head housing
Worn filter connection that no longer holds the filter securely
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This filter head replaces the following part numbers:
W11844302, W11346623, W11808483, 12590620, 12590621, 12590622, W10605367, W10861009, WPW10605367, 12590618, W10609243, W11308018, W11791385, AP8114280, AWP1598415.
W11844302 is the newest number for this filter head, superseding W11808483. The rest are earlier Whirlpool numbers for it. The source list continues beyond those shown, so additional numbers may exist. If your old filter head or parts diagram shows any of them, match against this list.
Compatibility
This filter head is listed for:
Whirlpool refrigerators, including WRF535SWHZ
Note: Filter heads differ between refrigerator models and generations, and no full model list is published for this part. Before ordering, compare your old filter head and its mounting against the Replaces list and your parts diagram, or contact our support team with your model number and we'll verify fit. This is the filter head only. The water filter is sold separately.
Key Features
Genuine OEM Whirlpool water filter head assembly, not an aftermarket equivalent
Current part number, superseding W11808483 and a long list of earlier Whirlpool filter head numbers
Restores a secure, leak-free filter connection
Filter head only. Water filter sold separately
Product Specifications
Part Number
W11844302
OEM Part Number
W11844302
Supersedes
W11808483
Part Type
Refrigerator Water Filter Head Assembly
Condition
Genuine OEM
Manufacturer
Whirlpool
Included
Filter Head Only
Application
Select Whirlpool Refrigerators
Installation Notes
⚠️ Shut Off Water and Unplug Power Turn off the water supply to the refrigerator and unplug it before starting. Remove the water filter, and have towels ready since some water will remain in the lines. Following your model's service guide, disconnect the water lines from the filter head and remove the screws or fasteners holding it to the refrigerator. Note how the lines and mounting are arranged, install the new filter head in the same position, and reconnect the lines securely. Install the water filter, restore water and power, and check every connection for leaks. Run water through the dispenser for several minutes to flush air from the lines, and check again for leaks.
Frequently Asked Questions
My water filter leaks or won't seal. Is this the part I need?
It can be. Check first that the filter is the correct one for your model and is fully seated. If the filter fits correctly but still leaks, or the head itself is cracked or damaged, replacing the filter head should fix it.
Does this include the water filter?
No. This is the filter head only. The water filter is sold separately.
My old filter head is marked W11808483, W10861009, or W11346623. Will this work?
All three numbers are on the Replaces list. Because filter heads vary between models, compare your old head and its mounting against this one, or contact our support team with your model number and we'll confirm before you order.
Is this a genuine Whirlpool part?
Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
ERP W10321304 Refrigerator Door Shelf Bin
Replaces Part Numbers:WPW10321304, W10321304, 2171046, 2171047, 2179574, 2179575, 2179607, 2179607K, 2198449, 2198449K, 2304235, 2304235K, W10321302, W10321303, W10549739, AP6019471, PS11752778.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO DA97-20025A Refrigerator Condenser Fan Motor
The XPARTCO DA97-20025A is an aftermarket replacement condenser fan motor for Samsung French door, Flex 4-door, and side-by-side refrigerators. This small DC motor lives in the compressor compartment at the back or bottom of the refrigerator, and its job is to pull air across the condenser coils and the compressor itself to carry heat away from the refrigeration system. That's a very different job from an evaporator fan — the condenser fan cools the mechanical side of the system rather than circulating cold air to your food, so a failing condenser fan affects the whole refrigerator's cooling capacity rather than just one compartment.
Rated at 12V DC, 0.11A. When this fan slows down or stops, the compressor and condenser coils can't shed heat properly, which makes the whole system work harder and less effectively — both the fresh food and freezer compartments can run warm together, the compressor may run hot and cycle off on thermal protection, and you may notice increased noise or heat coming from the back or bottom of the cabinet. Common failure modes include worn motor bearings, a jammed blade from dust and debris buildup around the condenser coils, or electrical failure of the motor windings. It directly replaces PD00076495, 4962138, AP6883701, PS12720104, and EAP12720104.
Quick Answer
The XPARTCO DA97-20025A Refrigerator Condenser Fan Motor fixes Samsung French door, Flex 4-door, and side-by-side refrigerators where both compartments run warm together, the compressor runs hot or trips out, the refrigerator runs constantly, or there's unusual noise from the back or bottom of the cabinet. 12V DC, 0.11A. Replaces PD00076495, 4962138, AP6883701, PS12720104, EAP12720104. This cools the compressor and condenser coils — a different part and a different symptom pattern than an evaporator fan, which only affects internal air circulation.
Common Problems This Part Fixes
Both the fresh food and freezer compartments running warmer than normal at the same time
Refrigerator running constantly as the compressor struggles to keep up
Compressor running unusually hot, or shutting off on thermal overload protection
Unusual noise — humming, buzzing, or grinding — coming from the back or bottom of the refrigerator
Ice maker not producing ice due to overall insufficient cooling
Noticeably higher energy use as the compressor works harder to compensate
Fan blade in the compressor compartment that doesn't spin freely or spins with a wobble when checked by hand
Excessive dust or debris buildup visible around the condenser coils and fan
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers:
DA97-20025A, 12 DC 0.11A 2122CNW Z19W12MS1A5-52K09, 4962138, AP6883701, ASM814341, EAP12720104, PD00076495, PS12720104.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with select Samsung French door, Flex 4-door, and side-by-side refrigerators, including model numbers such as:
RF27T5241SR, RF27T5201SR, RF27T5201SG, RF27T5501SR
RF28T5001SG, RF28T5001WW, RF28T5021SR, RF29BB8600QL, RF29BB860012
RF32CG5400SR, RF32CG5300SR, RF32CG5100SR
RF18A5101SR, RF22A4221SR, RF29A9071
RS22T5201SR, RS27T5200SG, RS27T5200SR, RS28A500ASR, RS28CB7600QL
Note — condenser fan, not evaporator fan: This motor cools the compressor and condenser coils in the machine compartment at the back or bottom of the refrigerator. It is a completely different part from an evaporator fan motor (such as our DA31-00334C or DA81-06013A listings), which sits behind the freezer's rear panel and circulates cold air to the food compartments. The two fail with different symptom patterns: a condenser fan problem tends to warm the whole refrigerator evenly and stress the compressor, while an evaporator fan problem typically leaves the freezer relatively fine while the fresh food side goes warm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Aftermarket replacement condenser fan motor — draws air across the condenser coils and compressor to remove system heat
Resolves "whole fridge running warm," "compressor overheating," "runs constantly," and "noise from the back or bottom" symptoms caused by fan failure
Rated 12V DC, 0.11A
Optimized fan blade and motor design for efficient heat dissipation with reduced operating noise
High-quality ball bearings for extended service life
Direct drop-in replacement matching the original mounting and blade fitment
Replaces PD00076495, 4962138, AP6883701, PS12720104, and EAP12720104
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DA97-20025A
OEM Part Number
DA97-20025A
Part Type
Refrigerator Condenser Fan Motor
Condition
Aftermarket Replacement
Brand
Samsung
Location
Compressor/machine compartment (back or bottom of cabinet)
Function
Cools the condenser coils and compressor
Voltage
12V DC
Amperage
0.11 A
Quantity
1 fan motor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Access is from the rear or bottom of the refrigerator, depending on your model: remove the rear access panel, or pull the unit out and remove the base grille/toe-kick panel at the bottom to reach the compressor compartment. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces similar symptoms to a failing motor and costs nothing to rule out. Photograph the wiring harness connector and the fan blade's position before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if it isn't included, matching the original orientation. Mount the new DA97-20025A in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing or coils before reassembling the access panel. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned and the compressor is no longer running hot. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
Both my fresh food and freezer sections are warm. Is this the right part?
Yes, that pattern points toward the condenser fan rather than an evaporator fan. Because the condenser fan cools the compressor and condenser coils that the entire refrigeration cycle depends on, a failing condenser fan tends to reduce cooling capacity across both compartments together, rather than leaving one side fine while the other struggles. If only your fresh food section is warm while the freezer stays cold, that's more typical of an evaporator fan issue instead.
My compressor feels very hot and the fridge cycles off sometimes. Could that be the fan?
Very possibly. Without adequate airflow from the condenser fan, the compressor and coils can't shed heat efficiently, causing the compressor to run hotter than designed. Many compressors have built-in thermal overload protection that shuts them down temporarily if they overheat, which can show up as the refrigerator seeming to randomly stop and restart cooling. Restoring proper condenser airflow is often what resolves this.
Could dirty condenser coils cause the same symptoms as a bad fan motor?
Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix.
Do I need this motor or an evaporator fan motor?
It depends on the symptom and the fan's location. The condenser fan sits in the compressor compartment at the back or bottom of the refrigerator and cools the compressor and coils — a failure here tends to warm the whole unit and stress the compressor. An evaporator fan sits behind the freezer's rear interior panel and circulates already-cold air to the compartments — a failure there typically leaves the freezer relatively unaffected while the fresh food section goes warm. If you're not sure which fan has failed, check which one is running (or not) by listening near each location with the refrigerator open and the door switch triggered manually, or contact our support team with your model number.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 0.11A), fan blade design, and mounting configuration of the original DA97-20025A condenser fan motor used in compatible Samsung refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA32-00006S Refrigerator Temperature Sensor – Compatible with Samsung Refrigerators
Product Description
Restore accurate temperature monitoring and consistent cooling with the XPARTCO DA32-00006S Refrigerator Temperature Sensor. This high-quality aftermarket replacement (also known as a thermistor) measures internal refrigerator or freezer temperatures and sends precise feedback to the control board. A failed or inaccurate sensor can cause temperature fluctuations, over-freezing, warm compartments, or error codes. Replacing it with this reliable XPARTCO sensor helps maintain stable temperatures and proper refrigerator operation. fits select Samsung Refrigerator models
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and performance.
Replaces Part Numbers
DA32-00006S, PD00002153, EAP4138590, AP4308802, PS4138590.
Compatibility
This replacement refrigerator temperature sensor fits select Samsung refrigerators.
Commonly used in fresh food or freezer compartments depending on model.
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM resistance and response specifications
🌡️ Accurate Temperature Sensing – Helps maintain consistent cooling
❄️ Fixes Cooling Issues – Resolves temperature swings and sensor-related errors
🧩 Direct-Fit Design – Installs easily without modification
💰 Cost-Effective Repair – Reliable alternative to OEM temperature sensors
📐 Product Specification
Part Number: DA32-00006S
Component Type: Refrigerator Temperature Sensor (Thermistor)
Function: Measures and reports internal temperature
Application: Refrigerator or freezer compartment (model dependent)
Connector Type: Plug-in wire harness
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the refrigerator before servicing to avoid electrical shock.
Basic Steps:
Disconnect refrigerator power.
Access the sensor location inside the compartment or behind the panel.
Disconnect the old temperature sensor from the wiring harness.
Remove the old sensor and install the new XPARTCO DA32-00006S sensor.
Reconnect wiring, reassemble panels, and restore power.
Allow several hours for temperatures to stabilize.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate temperature control and reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE
Product Description
Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing.
Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277.
Compatibility:
Compatible with models including but not limited to:
LG: LSC24971ST/00, LRSC21934SW
Kenmore: 79571039010, 79571039011, 79578789801
GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers.
🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals.
💪 Reliable Performance: Ensures precise activation of ice and water dispensing.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues.
Product Specification
Part Number: XPARTCO 6600JB3001E
Component Type: Refrigerator dispenser micro switch
Material: Plastic housing, metal contacts
Electrical Rating: 16A 1/2HP, 125/250VAC
Mounting: Snap-in or screw-mounted, 1/4" terminals
Operating Conditions: Suitable for refrigerator dispenser environments
Compliance: UL listed, Prop 65 warning for California.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today!
Add to cart now for a reliable fix!
XPARTCO 61005988 Refrigerator Defrost Control Board
The XPARTCO 61005988 is an aftermarket replacement adaptive defrost control board for Whirlpool and Maytag refrigerators, and also fits select Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, and Caloric models. Rather than defrosting on a fixed timer, this board adapts the defrost cycle based on actual compressor run-time, initiating a defrost cycle only when it's actually needed to keep the evaporator coils clear of frost buildup.
Measures approximately 3.77" x 3.11". Common causes of failure include electrical component wear or failure over time. Symptoms of a failing adaptive defrost control board include the refrigerator's compressor running for unusually long periods, the freezer failing to defrost properly, or the refrigerator running too warm as ice buildup on the evaporator coils restricts airflow. It directly replaces 61005988, 12002104, 61002983, 61003990, 67003349, 948430, AH2061226, AP4070403, AWP1337830, EA2061226, EAP2061226, PD00002433, PS2061226.
Quick Answer
The XPARTCO 61005988 Refrigerator Defrost Control Board fixes Whirlpool, Maytag, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, and Caloric refrigerators where the compressor runs too long, the freezer isn't defrosting, or the fridge is running too warm. Adaptive defrost design, ~3.77" x 3.11". Replaces 61005988, 12002104, 61002983, 61003990, 67003349, 948430, AH2061226, AP4070403, AWP1337830, EA2061226, EAP2061226, PD00002433, PS2061226. This board learns from your compressor's actual run-time rather than defrosting on a fixed schedule, so a failure here often shows up first as ice buildup rather than an obvious electrical symptom.
Common Problems This Part Fixes
Refrigerator's compressor running too long
Freezer not defrosting properly
Refrigerator running too warm
Excessive frost or ice buildup on the evaporator coils
Inconsistent cooling cycles
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator defrost control board directly replaces the following OEM and cross-reference part numbers:
61005988, 12002104, 61002983, 61003990, 67003349, 948430, AH2061226, AP4070403, AWP1337830, EA2061226, EAP2061226, PD00002433, PS2061226
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This defrost control board is compatible with select Whirlpool and Maytag refrigerators, and also fits select Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, and Caloric refrigerators built on the same platform, including model numbers such as JCB2388GRB, JCB2388GRQ, JCB2388GRW, JCB2388GTB, JCB2388GTW, JCB2389GRS, JCD2389GEB, JCD2389GEQ, JCD2389GES, JCD2389GEW, JCD2389GTB, JCD2389GTW, JSD2789GEB, JSD2789GEQ, JSD2789GES, JSD2789GEW, MSD2458GEB, MSD2458GEQ, MSD2458GEW, MSD2734GEQ, MSD2734GEW, MSD2756GEB, MSD2756GEQ, MSD2756GES, MSD2756GEW, MSD2758GEB, MSD2758GEQ, MSD2758GEW, MZD2766GEB, MZD2766GEQ, MZD2766GES, MZD2766GEW, MZD2768GEB, MZD2768GEQ, and MZD2768GEW.
Note: Always verify your full model number before ordering, since Whirlpool and Maytag use several different defrost control board designs across their refrigerator lineups. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement adaptive defrost control board
Resolves "compressor runs too long," "freezer won't defrost," and "runs too warm" symptoms
Adapts defrost timing to actual compressor run-time rather than a fixed schedule
Approximately 3.77" x 3.11"
Direct drop-in replacement matching the original mounting and connections
Replaces 61005988, 12002104, 61002983, 61003990, 67003349, 948430, AH2061226, AP4070403, AWP1337830, EA2061226, EAP2061226, PD00002433, PS2061226
Compatible with Whirlpool, Maytag, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, and Caloric refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
61005988
OEM Part Number
61005988
Part Type
Refrigerator Adaptive Defrost Control Board
Condition
Aftermarket Replacement
Defrost Type
Adaptive (compressor run-time based)
Dimensions
Approx. 3.77" x 3.11"
Installation
Built-in / integrated
Repair Difficulty
Moderate
Quantity
1 control board
Compatible Brands
Whirlpool, Maytag, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric
Installation Notes
⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator before beginning to disconnect power. Wear work gloves to protect your hands. Locate the defrost control board, typically found behind an access panel near the control area or compressor compartment depending on your model. Photograph the wiring connections before disconnecting anything. Disconnect the wiring harness from the old board, remove any mounting screws or clips, and pull it free. Install the new 61005988 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Reinstall the access panel. Restore power and monitor the refrigerator's cooling and defrost cycles over the next day or two to confirm normal operation with no excessive compressor run-time or ice buildup. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My refrigerator's compressor seems to run constantly. Is this the part I need?
Yes, this is a documented symptom of a failing adaptive defrost control board. Since this board decides when a defrost cycle should run based on the compressor's actual run-time, a malfunctioning board can fail to trigger defrost cycles appropriately, leading to ice buildup that makes the compressor work harder and run longer than normal.
What does "adaptive" mean for this defrost board?
An adaptive defrost control board doesn't run defrost cycles on a fixed timer. Instead, it tracks how long the compressor has been running and initiates a defrost cycle based on that actual usage, which is generally more efficient than a fixed-schedule approach since it responds to real conditions rather than a preset interval.
My freezer has ice buildup but I'm not sure if it's this board or something else.
This board is a reasonable place to start, since it's directly responsible for triggering the defrost cycles that prevent ice buildup. That said, other defrost system components — such as the defrost heater, thermostat, or a sensor — can produce similar symptoms, so if replacing this board doesn't resolve the issue, those related components are worth checking next.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool or Maytag OEM part, but is manufactured to match the adaptive defrost function, dimensions, and mounting configuration of the original 61005988 control board used in compatible Whirlpool, Maytag, and related refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA32-10104N Refrigerator Temperature Sensor
The XPARTCO DA32-10104N is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. This sensor is mounted on or near the evaporator coil and continuously monitors the internal temperature of the refrigerator compartment, transmitting real-time readings to the electronic control board.
Based on the data received from the sensor, the control board regulates the compressor, evaporator fan motor, and defrost system to maintain the set temperature. When this sensor fails or drifts out of calibration, the control board receives inaccurate temperature readings — leading to a refrigerator that runs too cold, too warm, or triggers a 5E/SE error code. Features a 9-inch cord for easy installation and a sensitive thermal element with temperature detection accuracy of ±0.1°C.
Quick Answer
The XPARTCO DA32-10104N Refrigerator Temperature Sensor fixes refrigerators that are too warm, too cold, display a 5E/SE error code, or have inconsistent temperatures that spoil food. It monitors internal refrigerator temperature and sends data to the control board to regulate cooling. Compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators.
Common Problems This Part Fixes
Refrigerator running too warm — food spoiling faster than normal
Refrigerator running too cold — food or drinks freezing in the fresh food section
5E or SE error code displayed on the control panel
Inconsistent or fluctuating temperatures inside the refrigerator
Compressor running continuously without reaching set temperature
Excessive frost or ice buildup on evaporator coils
Replaces Part Numbers
This sensor directly replaces the following OEM and cross-reference part numbers:
DA32-10104N, DA32-10104V, 2030330, ASM1216617, PD00026468, EAP4138666, AP4979323, PS4138666.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select refrigerators from the following brands:
Samsung French door refrigerators
Samsung side-by-side refrigerators
Samsung bottom freezer refrigerators
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Monitors internal refrigerator temperature and sends real-time data to the electronic control board
Fixes 5E/SE error codes caused by a faulty or out-of-calibration temperature sensor
Temperature detection accuracy of ±0.1°C for precise cooling control
9-inch cord length for easy installation and connection to the control board
Aftermarket replacement built to OEM-equivalent quality standards
Direct drop-in replacement — no modification required
DIY-friendly repair — installs with basic hand tools in 30–45 minutes
Product Specifications
Part Number
DA32-10104N
Part Type
Refrigerator Temperature Sensor (Thermistor)
Condition
Aftermarket Replacement
Application
Refrigerator Temperature Control System
Cord Length
9 inches
Detection Accuracy
±0.1°C
Resistance at 70°F
~9.3K ohms
Resistance at 90°F
~7.7K ohms
Resistance at 100°F
~6.2K ohms
Resistance at 120°F
~4.3K ohms
Compatible Brands
Samsung
Installation Notes
⚠️ Safety First — Unplug Refrigerator Before Starting Unplug the refrigerator from the power source before beginning any repair. Safely remove and store any food that could deteriorate while the power is off. Wear work gloves to protect your hands. The DA32-10104N sensor is located near the evaporator coil, typically behind the rear panel inside the refrigerator or freezer compartment. Remove the panel, locate the sensor along the yellow wire, disconnect the old sensor from its plug, and connect the new sensor in the same position. Reassemble the panel and restore power. Allow 24 hours for the refrigerator to return to normal operating temperature. Tip: Before replacing, test the old sensor with a multimeter — resistance readings outside the values in the specs table above confirm a faulty sensor. Consult your refrigerator's service manual for model-specific instructions.
Frequently Asked Questions
Will the DA32-10104N fit my Samsung refrigerator?
This sensor is compatible with select Samsung French door, side-by-side, and bottom freezer refrigerators. Use the model search above to verify your model, or contact our support team before ordering.
What does the temperature sensor do?
The temperature sensor (thermistor) continuously monitors the internal temperature of the refrigerator and sends readings to the electronic control board. The control board uses this data to regulate the compressor, fans, and defrost system to maintain the set temperature. When the sensor fails or drifts out of range, the control board receives inaccurate data and cannot maintain proper cooling.
What are signs that my temperature sensor needs replacement?
Common signs include: the refrigerator running too warm or too cold, food spoiling faster than normal, a 5E or SE error code on the display, inconsistent temperatures, or the compressor running continuously without reaching the set temperature.
How do I test the DA32-10104N sensor before replacing it?
Use a multimeter to measure the resistance across the sensor terminals. At 70°F the reading should be approximately 9.3K ohms, at 90°F approximately 7.7K ohms, at 100°F approximately 6.2K ohms, and at 120°F approximately 4.3K ohms. Readings significantly outside these values indicate a faulty sensor that needs replacement.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is designed to deliver reliable, accurate temperature sensing at a more affordable price point.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
5304530651 Refrigerator Genuine OEM Evaporator Fan Motor
115V 60hz 2.8W
Replaces Part Numbers: 5304530651, 242077704, AP7179350, PS16660872
Description: This Evaporator Fan Motor is a Genuine OEM part for specific Electrolux, Frigidaire refrigerator models. It is responsible for circulating air throughout the refrigerator’s interior to maintain consistent cooling and optimal temperature distribution. This motor works to move air over the evaporator coils, aiding in the cooling process and ensuring that the refrigerator and freezer compartments remain at the desired temperature.
