XPARTCO W10195417 Dishwasher Lower Rack Roller
Replaces Part Numbers: WPW10195417, W10195417, AP6016764, PS11750057
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
🚰 XPARTCO DD81-02265A Dishwasher Water Valve
🔁 Replaces These OEM Numbers: DD81-02265A, AP6244375, PS12085633
This Water Valve Assembly is a replacement part for specific Samsung dishwasher models. Crafted with high-quality materials, the water valve effectively controls the flow of water into your dishwasher, preventing leaks and ensuring precise water levels during each cycle. Installing this part can resolve common issues such as water not filling or leaking
✅ Key Features:
Aftermarket alternative compatible with OEM part DD81-02265A
120 V, single solenoid valve with durable housing
Controls precise water inlet timing and pressure for efficient cleaning
Pre-tested to meet performance and leak-free operation standards
Includes mounting bracket and standard hose port for easy installation
🔧 Solves Common Issues:
Dishwasher not filling
Slow or insufficient fill
Water inlet-related error codes
Leaks around valve assembly
Humming valve with no water flow
🧰 Compatibility:
Designed for specific Samsung dishwasher models
🚚 Why Shop at Parts-O-Matic?
Trusted XPARTCO aftermarket quality at a great value
Always Fast and Free U.S. shipping
Dedicated support for part selection and validation
Great fit for both DIY repairs and professional use
🛒 Prevent fill issues and get your dishwasher working right — order the XPARTCO DD81-02265A water valve now from Parts-O-Matic, shipped fast and free!
PK136277-1 Lower Dishrack Roller and Axle Set
Single Pack
Replaces part Numbers: WD12X10136, WD12X10277
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11497943 Dishwasher Genuine Drain Pump Motor
Replaces Part Numbers: W11497943, AP6994646, PS16221213, W11412663.
Description: This Drain Pump Motor is a Genuine OEM component for select Maytag, Kenmore, Whirlpool dishwasher models. This electric motor powers the drain pump to empty wash water from the tub at the end of cycles. Common causes of a bad pump motor include wear over extended use, moisture damage degrading electronics, or electrical faults from voltage fluctuations.
ERP W10888592 Dishwasher Upper Dishrack Wheel
Replaces Parts Numbers: W10888592, WP8575281, 8575281, W10845760, AP6036019, PS11769236.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W11126005CM Dishwasher Wash Vane Sensor
Description: This Sensor is a replacement component specifically designed for certain Whirlpool dishwasher models. It plays a crucial role in monitoring cycle conditions like temperature and soil levels to automatically customize wash sequences. Causes of a bad sensor can include leaking or faulty wiring disrupting signals over time, mineral buildup gumming internal mechanisms, or damage from impact.
Replaces Part Numbers: W11126005, W11503875, W10380177, W10380483, W10647239, AP6261394, PS12114437.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
WD24X10018 Dishwasher Genuine Piston & Nut Assembly
Replaces Part Numbers: WD24X10018, 821081, WD22X0133, WD22X133, WD24X0199, WD24X0220, WD24X199, WD24X220, AH260690, EA260690, AP2617344, PS260690.
Description: This Piston & Nut Assembly is a Genuine parts for specific GE dishwasher models. It plays a critical role in the dishwasher’s water management system, helping to control water flow and ensuring proper drainage during the wash cycle. You should replace this piston & nut assembly if it becomes worn out or damaged. Common causes of a bad piston & nut assembly can include mineral buildup from hard water, general wear and tear from regular use, or physical damage due to debris or foreign objects in the dishwasher.
Genuine Whirlpool OEM
Whirlpool WP8577376 Washer Genuine OEM Transmission Shaft Seal
Factory replacement transmission stem / agitator shaft seal for select Whirlpool-built top-load washers.
Product Overview
WP8577376 is a Genuine Whirlpool OEM washer shaft seal. Whirlpool describes it as a washing machine transmission stem seal, while Sears identifies it as an agitator shaft seal.
The seal helps prevent wash water from leaking between the tub mounting stem and the agitator drive shaft, protecting the transmission/drive area from moisture.
Quick Answer
WP8577376 is the current Genuine Whirlpool OEM replacement for several older washer shaft and center-post seals. It is commonly used on older Whirlpool-built direct-drive top-load washers.
Common Problems This Part May Fix
Water leaking around the agitator or center-post area
Moisture reaching the transmission or drive system
Worn, cracked, hardened, or missing shaft seal
Leak discovered during tub or transmission service
Replaces and Cross-References
WP8577376, WP91938, 8577376, 91938, 1181094, 356934, 356934BULK, 356934D, 99404, J27-500, J27-661, LP630, LP631, AP6013521, AWP49388, PD00005095, PS11746747
Cross-reference numbers are provided for identification. Always verify the complete appliance model number before ordering.
Compatibility
Fits select Whirlpool-built washers sold under Whirlpool, Kenmore, KitchenAid, Roper, Estate, Crosley, Admiral, Amana, Magic Chef, Maytag and related brands. Compatible model examples include:
LSR7233DZ1
LSQ8243HQ0
LSQ8512KQ0
LSQ8543JQ0
LSQ9110PW3
LSQ9544KQ0
LSQ9549LG1
110.10502990
110.16602690
110.73875800
110.71770610
110.73775200
Important: This is only a partial compatibility list. Verify the full washer model number and original seal number before purchase.
Key Features
Genuine Whirlpool OEM replacement part
Transmission stem / agitator drive shaft sealing function
Helps prevent water intrusion into the drive area
Updated replacement for multiple older shaft-seal numbers
Designed for select Whirlpool-built top-load washers
Product Specifications
Manufacturer Part Number
WP8577376
Brand
Whirlpool
Part Type
Transmission Stem / Agitator Shaft Seal
Condition
New
Part Quality
Genuine OEM
Application
Washer Tub / Transmission Shaft Sealing
Package Quantity
1 Shaft Seal
Installation Notes
Unplug the washer and shut off both water-supply valves before service.
Drain any remaining water and follow the appliance service procedure for tub/drive-system access.
Remove the old shaft seal without damaging the mounting surface or drive shaft.
Clean the sealing surface before installing the replacement.
Install the new seal in the correct orientation and reassemble the washer.
Run a test cycle and inspect carefully for leaks.
Service note: A leak in this area can also involve worn tub seals, a damaged mounting stem, corrosion, or transmission/shaft wear. Inspect related components while the washer is disassembled.
Frequently Asked Questions
Is WP8577376 a Genuine Whirlpool OEM part?
Yes. WP8577376 is a Genuine Whirlpool OEM replacement shaft seal.
What does this seal do?
It helps prevent water from leaking between the tub mounting stem and agitator drive shaft.
Does WP8577376 replace 8577376 and 91938?
Yes. Those are among the earlier part numbers superseded by WP8577376.
Is this the complete transmission?
No. This listing is for the shaft seal only. The transmission/gearcase and other seals are not included.
Shop With Confidence
Use your washer's complete model number to confirm fitment before ordering.
Genuine Whirlpool OEM Factory Replacement Compatibility Support Fast U.S. Shipping
XPARTCO W10083957V Dishwasher Chopper Blade
Replaces Part Numbers: W10083957V, WP8268383, W10083957, 8268383, AP5983779, PS11722146.
This Food Chopper is a replacement part that is compatible with various Whirlpool dishwasher models. This food chopper is designed to grind and chop food particles during the wash cycle, preventing clogs and ensuring a thorough clean.
This is an aftermarket part that can be used as a replacement for the OEM part.
Choice Manufactured Parts
Choice 628334 Dishwasher Water Valve Replaces 10023852
Aftermarket dishwasher water inlet solenoid valve for select Bosch and Thermador dishwashers.
Product Overview
The Choice 628334 Dishwasher Water Valve is an aftermarket replacement water inlet solenoid valve designed for select Bosch and Thermador dishwashers. It replaces Bosch part 10023852 and earlier valve numbers including 00628334 and 628334.
The valve controls the incoming household water supply during the dishwasher fill cycle.
Quick Answer
Choice part 628334CM is a dishwasher water inlet solenoid valve with a garden-hose-style inlet and push-on outlet hose connection. It replaces Bosch 10023852 on compatible Bosch and Thermador dishwashers.
Common Problems This Part May Fix
Dishwasher will not fill with water
Dishwasher fills slowly or inconsistently
Water inlet valve leaks
Dishwasher continues to receive water when it should not
Poor wash performance caused by insufficient fill
Replaces and Cross-References
10023852, 00628334, 628334CM, 3278459, 33199023, 628334, 9000655808, ABS12394, AP5691117, AP7193108, EAP8729241, OEM21579333, PD00075605, PS8729241
Cross-reference numbers are provided for identification. This is a Choice Manufactured Parts aftermarket replacement and is not a Genuine Bosch OEM part.
Compatibility
Designed for select Bosch and Thermador dishwashers. Compatible model examples include:
SHE33T56UC/01
SHE53T52UC
SHE53T55UC
SHEM63W55N/01
SHP65T55UC/01
SHP68T55UC/01
SHS863WD5N/10
SHX68T55UC/01
DWHD440MFP
Important: This is only a partial compatibility list. Verify the complete appliance model number and original valve part number before ordering.
Key Features
Choice Manufactured Parts aftermarket replacement
Water inlet solenoid valve
Garden-hose-style inlet connection
Push-on outlet hose connection
Replaces Bosch 10023852
For select Bosch and Thermador dishwashers
Specifications
Brand
Choice Manufactured Parts
Choice Part Number
628334CM
Part Type
Dishwasher Water Inlet Solenoid Valve
Replaces
10023852 / 00628334 / 628334
Inlet
Garden-hose-style connection
Outlet
Push-on hose connection
Condition
New
Quality
Aftermarket Replacement
Installation Notes
Disconnect electrical power to the dishwasher.
Shut off the household water supply before disconnecting the inlet line.
Use a towel or shallow pan for residual water in the line.
Transfer hoses/connectors exactly as configured on the original valve.
After installation, restore water and power and carefully inspect all connections for leaks.
A no-fill condition can also be caused by a closed water supply, clogged screen, float/float switch problem, wiring issue, or control fault. Diagnose the appliance before replacing parts.
FAQ
Does Choice 628334 replace Bosch 10023852?
Yes. Choice 628334CM is marketed as an aftermarket replacement for Bosch 10023852 and earlier 00628334 / 628334.
Is this a Genuine Bosch OEM part?
No. This is a Choice Manufactured Parts aftermarket replacement.
Will it fit every Bosch dishwasher?
No. Fitment is model-specific. Verify the full dishwasher model number and original valve number before ordering.
Shop With Confidence
Confirm your dishwasher model number before purchase. Compatibility assistance is available if you are unsure whether 628334CM / 10023852 is correct for your appliance.
Choice ReplacementBosch / Thermador FitmentWater Inlet ValveCompatibility Support