XPARTCO EXP20AG - 5 Pack Glass Line Fuse, Fast Blow, 20A
The XPARTCO (5 Pack) EXP20AG is an aftermarket replacement fast-blow glass line fuse rated 20A at 250V, used as the primary overcurrent protection component in microwaves and a range of other household appliances. A line fuse sits directly in the incoming power path: as long as current draw stays within its rating, it does nothing at all, but the instant a short circuit or an overcurrent condition pushes current past 20A, the thin wire element inside the fuse melts and opens the circuit — sacrificing itself to protect the more expensive components downstream, like a transformer, magnetron, or control board. A blown fuse is why an appliance can go from working normally to completely dead with no lights, no display, and no response to any button.
This is a standard-dimension glass cartridge fuse measuring 6mm x 30mm, fast-blow (fast-acting) rated, so it opens quickly once its rating is exceeded rather than tolerating a brief surge the way a slow-blow fuse would. It is commonly used across GE, Frigidaire, Whirlpool, Kenmore, and other brands' microwaves, and also turns up in HVAC control boards and various small appliances that use this same standard fuse size and rating. A fuse itself does not wear out from age the way a mechanical part does — if one has blown, it is a symptom of an overcurrent event somewhere else in the appliance, and it's worth understanding why before simply swapping in a new one.
Quick Answer
The XPARTCO EXP20AG Glass Line Fuse fixes microwaves and other appliances that have gone completely dead — no lights, no display, no response to any button. Fast-blow, 20A, 250V, standard glass cartridge, 6mm x 30mm. Commonly used across GE, Frigidaire, Whirlpool, and Kenmore microwaves and other appliances requiring this fuse size and rating. If a new fuse blows again right away, don't just keep replacing it — that almost always means there's an underlying short circuit that needs to be diagnosed first.
Common Problems This Part Fixes
Microwave completely dead — no display, no lights, no response to any button
Appliance suddenly stopped working with no warning
Microwave won't start even though the outlet has power
HVAC control board or other appliance electronics unresponsive
Appliance tripped off after a power surge or brownout
Visible blown or darkened fuse when inspected against a light
Continuity test shows an open circuit across the old fuse
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This glass line fuse directly replaces the following OEM and cross-reference part numbers:
EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, 5304464087
Because this is a standard fuse size and rating rather than a brand-specific component, the exact OEM part number your appliance's manual references will vary. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This fuse is compatible with select appliances from the following brands that use a standard 20A, 250V, fast-blow 6mm x 30mm glass cartridge fuse:
GE and Hotpoint microwaves (select models)
Frigidaire microwaves (select models)
Whirlpool and Kenmore microwaves (select models)
KitchenAid, Maytag, and Amana microwaves (select models)
Select HVAC control boards and other electronics using this fuse size and rating
Note — glass vs. ceramic body: This is the glass-body EXP20AG fuse. A visually similar ceramic-body fuse (commonly labeled EXP20A) is also widely sold at the same 20A/250V rating for many of the same appliances. Check which body material your appliance's original fuse used before ordering, and always match the amperage and voltage rating exactly — never substitute a higher-amperage fuse "to stop it from blowing," since that removes the very protection the fuse is designed to provide. Contact our support team with your model number if you're unsure which fuse your appliance needs.
Key Features
Aftermarket replacement fast-blow glass line fuse — primary overcurrent protection for the appliance's incoming power circuit
Rated 20A at 250V, standard 6mm x 30mm glass cartridge dimensions
Fast-blow (fast-acting) design opens quickly once the rated current is exceeded
Resolves "completely dead," "no display," and "no response to any button" symptoms caused by a blown line fuse
Fits standard fuse holders/clips used across a wide range of microwaves and other appliances
Replaces EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, and 5304464087
Compatible with GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances requiring this fuse size and rating
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
EXP20AG-5PK
OEM Part Number
Varies by brand/model — see Replaces Part Numbers
Part Type
Glass Line Fuse (Overcurrent Protection)
Condition
Aftermarket Replacement
Amperage
20A
Voltage
250V
Response Speed
Fast-blow (fast-acting)
Body Material
Glass
Fuse Size
6mm x 30mm
Application
Microwaves and select other household appliances / HVAC controls
Quantity
1 fuse
Compatible Brands
GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, Amana
Installation Notes
⚠️ Danger — Microwave High-Voltage Capacitor If you are replacing this fuse in a microwave, be aware that microwaves contain a high-voltage capacitor that can store a dangerous electrical charge even after the unit has been unplugged. Never open a microwave's cabinet without first discharging the capacitor using an insulated screwdriver shorted across its terminals, and never touch the capacitor or its terminals directly. If you are not fully comfortable with this step, have a qualified appliance technician perform the fuse replacement instead.
⚠️ Unplug The Appliance Before Starting — Match Amperage And Voltage Exactly Disconnect power at the outlet or shut off the circuit breaker before beginning. Locate the fuse holder — on most microwaves this is accessible after removing the outer cabinet, often near the incoming power cord or the control board. Remove the old fuse from its clip or holder and inspect it: a blown fast-blow fuse often shows a visibly darkened or broken filament, or a scorched glass body. Test with a multimeter set to continuity if the fuse looks intact but you suspect it's still bad — a good fuse shows continuity end to end, a blown one shows none. Install the new EXP20AG fuse in the same holder, making sure the amperage and voltage rating match your appliance's original fuse exactly. Reassemble the cabinet, restore power, and test the appliance. Tools needed: Phillips screwdriver, insulated screwdriver (for microwave capacitor discharge), multimeter (recommended), work gloves.
Frequently Asked Questions
I replaced the fuse and it blew again right away. What's going on?
A fuse doesn't fail on its own from age — it blows because something downstream drew more current than it should have. If the new fuse blows again immediately, that's a strong sign of an underlying short circuit or a failing component such as the transformer, magnetron, or a shorted capacitor. Continuing to replace the fuse without finding that root cause will just keep blowing new fuses, and in a microwave specifically, that diagnosis involves working near a high-voltage capacitor that should only be handled by someone comfortable discharging it safely, or by a qualified technician.
Can I use a higher-amperage fuse if this one keeps blowing?
No — this is one of the most important things to avoid with any fuse. The fuse's rating is chosen specifically to protect the wiring and components in the circuit it sits in. Installing a higher-amperage fuse "so it stops blowing" removes that protection and can allow a fault to overheat wiring or damage expensive components (or start a fire) instead of safely interrupting the circuit. Always replace a fuse with the same amperage and voltage rating as the original.
How do I know if the fuse is actually blown?
Visually, a blown fast-blow fuse often shows a broken or darkened filament inside the glass body, or scorching on the glass itself. If it looks fine but you still suspect it, the reliable way to check is with a multimeter set to continuity (with the appliance unplugged and the fuse removed from the circuit) — a good fuse reads continuity end to end, while a blown fuse reads open with no continuity at all.
Is EXP20AG the same as EXP20A?
They share the same 20A/250V rating, but EXP20AG refers to the glass-body version of this fuse while EXP20A commonly refers to a ceramic-body version sold for many of the same appliances. Check which body material your appliance's original fuse used, and if you're not sure, contact our support team with your model number for confirmation.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine brand-specific OEM part, but is manufactured to the same standard 20A, 250V, fast-blow glass cartridge dimensions and rating used across the OEM fuses in compatible GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 0130F00010 Gas Furnace Flame Sensor
Fits the Specific Goodman Gas Furnace models
Replaces Part Numbers:TJFLS013, AP6326767, 0130F00010
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W10434452 Dual Surface Element Switch – Replaces WPW10434452 – Compatible with Whirlpool, Maytag & KitchenAid Ranges
Product Description
Restore precise burner temperature control with the W10434452 Dual Surface Element Switch, an aftermarket replacement designed to manage dual-size surface elements on electric ranges. This switch allows you to control both the inner and outer heating elements for flexible cooking performance. A faulty surface element switch may cause burners not to heat, overheat, or remain stuck on one setting. Replacing it helps restore safe, responsive burner operation and consistent cooking results.
This replacement part is manufactured to OEM-equivalent specifications and offers reliable performance at a cost-effective price.
Replaces Part Numbers
WPW10434452, W10434452, 2118918, PD00023784, EAP11754687, AP6021365, PS11754687.
Compatibility
This replacement dual surface element switch fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore (Whirlpool-manufactured) electric ranges.
Example compatible models include (but are not limited to):
Whirlpool WFE515S0ES, WFE540H0AS
Maytag MER8800FZ
KitchenAid KERA205PB
Always verify your range’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and electrical performance
🔥 Dual-Element Control – Supports both inner and outer burner elements
🎛️ Smooth Temperature Adjustment – Restores accurate heat control
💪 Durable Internal Contacts – Designed for long service life
💰 Cost-Effective Repair – Reliable alternative to OEM switch pricing
📐 Product Specification
Part Number: W10434452
Component Type: Dual Surface Element Control Switch
Voltage: 240V
Function: Controls dual-size surface heating elements
Mounting: Control panel shaft-mounted
Terminal Type: Spade terminals
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Disconnect power at the breaker before servicing the range to avoid electrical shock.
Basic Steps:
Turn off power to the range at the breaker.
Remove the control knob and access the control panel.
Label and disconnect wires from the old switch.
Remove mounting screws and take out the old switch.
Install the new W10434452 switch and reconnect wiring.
Reassemble the control panel and restore power.
Test burner operation.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore full burner control and safe cooking performance — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO DA32-00024W Refrigerator Temperature Sensor
The XPARTCO DA32-00024W is an aftermarket replacement temperature sensor for Samsung refrigerators. This sensor senses the temperature inside the refrigerator and sends that information to the electronic control board, which uses it to regulate cooling and, on many models, manage the defrost cycle. The manufacturer designation for this sensor is "SENSOR TEMP;NW2,5V,R-DEF," indicating its role in the defrost-related temperature monitoring circuit.
Over time, the sensor's electronics can drift out of calibration or fail outright from age or moisture exposure. A failing sensor typically shows up as inconsistent cooling, temperatures that run warmer or colder than the set point, or increased energy consumption as the refrigerator's control struggles to compensate for inaccurate temperature readings. It directly replaces AP5579174, 3955001, and PS4138632.
Quick Answer
The XPARTCO DA32-00024W Refrigerator Temperature Sensor fixes Samsung refrigerators with inconsistent cooling, temperatures running warmer or colder than expected, or increased energy consumption. Replaces AP5579174, 3955001, PS4138632. This sensor is tied to defrost-related temperature monitoring on many models — if you're also seeing frost buildup or defrost cycle issues, this sensor is worth checking alongside the defrost thermostat or heater.
Common Problems This Part Fixes
Inconsistent cooling in the refrigerator or freezer compartment
Temperature running warmer or colder than the set point
Increased energy consumption from the refrigerator overcompensating
Temperature fluctuations affecting food freshness
Defrost cycle irregularities on models where this sensor is part of that circuit
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator temperature sensor directly replaces the following OEM and cross-reference part numbers:
DA32-00024W, 3955001, AP5579174, ASM30135, EAP4138632, PD00030760, PS4138632.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This temperature sensor is compatible with select Samsung refrigerators, including model numbers RS25H5111SR and RF4287HARS.
Note: Samsung uses several different temperature sensors across its refrigerator lineup, including sensors for different compartments and functions. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which sensor your refrigerator needs.
Key Features
Aftermarket replacement temperature sensor — monitors internal refrigerator temperature
Resolves "inconsistent cooling," "temperature off target," and "high energy use" symptoms caused by sensor failure
Reports temperature data to the electronic control board for cooling and defrost regulation
Direct drop-in replacement — no modification required
Replaces AP5579174, 3955001, and PS4138632
Compatible with Samsung refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Straightforward installation
Product Specifications
Part Number
XPDA32-00024W
OEM Part Number
DA32-00024W
Part Type
Refrigerator Temperature Sensor
Condition
Aftermarket Replacement
Brand
XPARTCO
Manufacturer Designation
SENSOR TEMP;NW2,5V,R-DEF
Function
Senses internal temperature and reports to the electronic control
Repair Difficulty
Easy
Quantity
1 temperature sensor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator and safely store any food that could spoil while the power is off before installing this part. Wear work gloves to protect your hands. Locate the old temperature sensor per your model's service diagram, since its position varies by refrigerator model. Photograph the wiring connection before disconnecting anything. Disconnect the wiring harness from the old sensor, remove any mounting clips or fasteners holding it in place, and pull it free. Install the new DA32-00024W in the same position, reconnect the wiring harness fully, and secure any mounting hardware. Restore power and monitor the refrigerator's temperature over the next 24 hours to confirm consistent, accurate cooling has returned. Tools needed: Phillips screwdriver (model-dependent), work gloves.
Frequently Asked Questions
My refrigerator's temperature seems inconsistent. Is this the part I need?
Yes, this is a common symptom of a failing temperature sensor. Since this sensor is what reports internal temperature to the control board, a drifting or failed sensor can cause the refrigerator to run warmer or colder than intended, or to cycle inconsistently as the control tries to work from inaccurate data.
What does the "R-DEF" in this sensor's designation mean?
This suggests the sensor plays a role in the refrigerator's defrost-related temperature monitoring on applicable models. If you're seeing frost buildup or defrost cycle problems in addition to general cooling inconsistency, this sensor is worth checking alongside other defrost system components, such as the defrost thermostat or heater.
Is this a difficult repair?
No, replacing this sensor is generally a straightforward repair once you've located its mounting position, which can vary by model. It typically involves disconnecting a wiring harness and removing a small mounting clip or fastener.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the sensing function, voltage reference, and mounting configuration of the original DA32-00024W sensor used in compatible Samsung refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA32-00006W Genuine Samsung OEM Refrigerator Thermistor
Refrigerator defrost temperature sensor.
Replaces Part Numbers: DA32-10105R, DA32-00006W, DA32-00006U, 2030342, DA32-00006B, DA32-00006C, DA32-00006D, DA32-00006L, DA32-00006M, DA32-00006T, DA32-00006V, AP4135567, PS4138681.
The Samsung Defrost Sensor is a genuine part designed specifically for Samsung refrigerators. This sensor, sometimes referred to as a defrost thermostat or defrost temperature sensor, is an integral part of your refrigerator's defrost system.
WPW10415450 Genuine OEM Whirlpool Range Burner Knob
The WPW10415450 is a genuine Whirlpool OEM surface burner control knob for gas ranges and cooktops. This is the knob you turn to light and adjust a surface burner — it fits onto a D-shaped valve stem behind the control panel, and its position controls how far the gas valve opens, from off through lite, hi, medium, and low. Markings printed around the perimeter line up with an indicator arrow on the control panel so you can see exactly what setting you've selected.
Finished in stainless steel/chrome, approximately 2" in diameter. Over years of use, the knob's internal D-shaped socket can wear out and stop gripping the valve stem securely, or the knob itself can crack, melt slightly from heat exposure, or simply wear down from repeated turning. A worn or damaged knob typically shows up as difficulty adjusting the burner heat, a knob that feels loose or wobbly, a knob that spins without turning the valve, or one that no longer seats securely onto the shaft. It directly replaces W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, and PD00007159.
Quick Answer
The WPW10415450 Genuine OEM Whirlpool Range Burner Knob fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas ranges with a burner knob that's cracked, loose, wobbly, spins without adjusting the flame, or won't seat onto the valve stem. Stainless steel/chrome finish, 2" diameter, fits a D-shaped shaft. Replaces W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, PD00007159. Visually similar knobs W10284885 and W10316664 are NOT compatible with this part despite looking alike.
Common Problems This Part Fixes
Difficulty turning or adjusting the burner heat setting
Knob feels loose or wobbly on the shaft
Knob spins freely without turning the gas valve
Knob won't seat securely onto the valve stem
Visible cracks, melting, or heat damage on the knob
Knob missing entirely, making burner adjustment impossible
Setting markings no longer line up correctly with the indicator arrow
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This range burner control knob directly replaces the following OEM and cross-reference part numbers:
WPW10415450, W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, AWP50229, PD00007159
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This burner knob is compatible with select Whirlpool gas ranges and cooktops, and also fits select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea appliances built on the Whirlpool platform, including model numbers such as:
GG388LXB01, GG388LXB02, GG388LXB03, GG388LXQ01, GG388LXQ02, GG388LXS04, GG388LXS05
GG390LXB01, GG390LXB03
GCG388LXQ03
GGG388LXB04, GGG388LXO04, GGG390LXQ01, GGG390LXS01, GGG390LXS02
Note — visually similar knobs are NOT compatible: Whirlpool uses several burner knobs that look nearly identical to this one but are not interchangeable, including W10284885 and W10316664. Same appearance does not mean same fit — these knobs use different internal shaft sockets and will not seat correctly on this valve stem. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which knob fits your range.
Key Features
Genuine Whirlpool OEM part — factory-specified D-shaft socket and setting markings
Fits a D-shaped burner valve stem for a secure, non-slip grip
Resolves "loose or wobbly knob," "spins without adjusting flame," "won't seat on the shaft," and "cracked or damaged knob" symptoms
Stainless steel/chrome finish, approximately 2" diameter
Clear off/lite/hi/med/low markings aligned to the control panel indicator arrow
No tools required — simple pull-off, push-on installation
Replaces W10415450, AP6021125, 2118719, PS11754446, EAP11754446, W10294797, W10325899, and PD00007159
Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, and Ikea gas ranges
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WPW10415450
Part Type
Range Surface Burner Control Knob
Condition
Genuine OEM
Brand
Whirlpool
Application
Gas Ranges and Cooktops
Finish
Chrome
Diameter
Approx. 2 in.
Shaft Type
D-shaped valve stem
Settings
Off, Lite, Hi, Med, Low
Repair Difficulty
Very Easy — no tools required
Quantity
1 knob
Compatible Brands
Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore, Ikea
Installation Notes
⚠️ Unplug Range Or Shut Off Breaker Before Starting Disconnect power at the outlet or shut off the circuit breaker before beginning. Pull the old knob straight off the valve stem — on most models this requires no tools, just firm, even pressure in the direction of the indicator arrow. Confirm the new WPW10415450 knob by checking that the part number matches before installing. Align the top of the new knob with the control panel's indicator arrow, then press the knob onto the D-shaped shaft until you feel and hear it click securely into place. Restore power and test that the knob turns smoothly through its full range, with the markings lining up correctly against the indicator arrow at each setting. Tools needed: none.
Frequently Asked Questions
My knob spins but doesn't seem to change the burner flame. Is this the right part?
Yes, this is a common symptom of a worn knob. Over time, the internal D-shaped socket that grips the valve stem can wear out, letting the knob spin independently of the shaft instead of turning it. Replacing the knob restores that positive connection so turning it actually opens and closes the gas valve as expected.
I found a knob online that looks identical but has a different part number. Will it work?
Not necessarily, and this is worth being careful about. Whirlpool uses several burner knobs, including W10284885 and W10316664, that closely resemble this one visually but use different internal shaft sockets and are not compatible with this valve stem. Always match the exact part number rather than relying on appearance, and verify against your model number if you're unsure.
Do I need any tools to replace this knob?
No. This is a simple pull-off, push-on repair — remove the old knob by pulling it straight off the shaft, then press the new one on until it clicks into place. No screws, no disassembly of the control panel required.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original D-shaft socket, finish, and setting markings of the burner knob originally installed on your range.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
(4 Pack) 74009592CM Burner Control Knob
Black plastic burner knob
Fits Specific Maytag, Jenn Air, Whirlpool ranges
Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334.
Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO W10900067 Dryer Thermal Cut-Off Fuse & Thermostat Kit – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore safe and reliable dryer heating with the XPARTCO W10900067 Dryer Thermal Cut-Off Fuse & Thermostat Kit. This cut-off terminal is a replacement Part for specific Kenmore, Maytag, Roper, Whirlpool dryer models. The kit contains a 309°F Thermal Cut-Off Fuse and a high limit thermostat. In electric dryers, it shuts off the heat if overheating occurs to prevent fire risk. The thermal fuse cuts power while the thermostat regulates the operating temperature. To install, first, unplug the dryer. Use a multimeter to test the old fuse for continuity at room temperature; it should read zero ohms.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
W10900067, 4460718, N197, 197CM, 197, PD00046493, EAP11769432, AP6036100, PS11769432.
Compatibility
This replacement dryer thermal cut-off fuse and thermostat kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.
Example compatible models include (but are not limited to):
Whirlpool WED4800XQ, WED4815EW1
Maytag MEDC215EW1
Kenmore 110.6012010
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Matches OEM temperature and safety specifications
🌡️ Accurate Heat Protection – Helps regulate dryer temperature safely
🔥 Overheat Safety Cut-Off – Prevents damage caused by excessive heat
💰 Cost-Effective Repair – Reliable alternative to higher-priced OEM kits
🛡️ Fixes Common Issues – Resolves no heat, overheating, and thermal shutdowns
📐 Product Specification
Part Number: W10900067
Component Type: Dryer Thermal Cut-Off Fuse & Thermostat Kit
Includes: Thermal cut-off fuse and high-limit thermostat
Application: Heater housing / exhaust temperature control
Material: Heat-resistant metal housings
Mounting: Screw-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove the rear access panel.
Locate the thermal cut-off and thermostat on the heater housing.
Disconnect wiring and remove old components.
Install the new XPARTCO W10900067 components in the same positions.
Reconnect wiring, reinstall panel, and restore power.
Run a test cycle to confirm proper heating.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore safe dryer heating and protection — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO LA1053 Dryer Thermostat Kit – Replaces LA-1053 – Compatible with Whirlpool, Maytag, Admiral, and Amana Dryers
Product Description
Restore proper dryer temperature control with the XPARTCO LA1053 Dryer Thermostat Kit. This Dryer Thermostat Kit is a replacement part for specific Maytag, Whirlpool dryer models. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (53-0771) and two thermal fuses.
53-1096 (blue dot for Gas)
53-1182 (Red dot for Electric)
Replaces Part Numbers
LA-1053, 3344, 53-0143, 53-0170, 53-0261, 53-1133, 53-1526, AH2162282, EA2162282, ERLA1053, ET403, ET405, K35-601, LA-1053VP, LA1053, SET405, TJ90SET405, 531526, 531182, 531133, 530261, LA1053, 530143, WP53-1182, 53-1182, 53-0143, 53-1096 , L248-80F, PD00002446, EAP2162282, AP4242472, PS2162282, WP53-0771, 53-0771, 1422, 53-0306, 53-1037, 53-1459, ER53-0771, SET176, TJSET176, AP6009638, PS11742806, WP53-1096, 53-1096, 4434853, AP6009640, PS11742808.
Compatibility
This replacement thermostat kit fits select Whirlpool, Maytag, Admiral, and Amana dryers.
Example compatible models include (but are not limited to): Maytag DE303, Whirlpool LDE8824ACE, and Amana LEA30AW.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Compatibility – Compatible with Whirlpool, Maytag, Admiral, and Amana dryers
🔥 Complete Kit – Includes cycling thermostat, high-limit thermostat, and thermal fuse. Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.
💰 Cost-Effective Repair – Replaces multiple components in one package
🛠️ Easy to Install – Direct-fit parts require only basic tools
🛡️ Fixes Common Issues – Resolves dryers not heating, overheating, or shutting off early
📐 Product Specification
Part Number: LA1053
Component Type: Dryer Thermostat and Thermal Fuse Kit
Material: Heat-resistant metal with high-quality electrical connectors
Mounting: Direct-fit replacement on heater housing and blower housing
Operating Conditions: Designed for residential electric dryers
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Unplug the dryer and remove the rear access panel.
Locate the thermostat and thermal fuse on the heater housing.
Remove screws securing the old components and disconnect wires.
Install the new thermostats and fuse from the XPARTCO LA1053 kit.
Reconnect wiring, reinstall the back panel, and restore power.
Run a test cycle to confirm proper heating and temperature control.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dryer running safely and efficiently again — Add to Cart Now for a reliable, budget-friendly repair kit!
