Search results for "refrigerator control board"

WR9X502 Refrigerator Genuine OEM Defrost Timer Description: This Defrost Timer is an OEM part for GE refrigerators. This part manages the defrost cycle of the fridge and freezer compartments, ensuring that the evaporator coils do not build up excessive frost.   This cycling is crucial for maintaining optimal temperatures for food preservation and energy efficiency. Over time, the defrost timer can malfunction due to wear, electrical issues, or a buildup of dust and debris, leading to poor performance or failure. Replaces Part Numbers:WR9X502, WR09X10049, WR09X0278, WR09X0283, WR09X0313, WR09X0329, WR09X0334, WR09X0339, WR09X0342, WR09X0350, WR09X0356, WR09X0363, WR09X0364, WR09X0366, WR09X0375, WR09X0387, WR09X0408, WR09X0409, WR09X0418, WR09X0419, WR09X0428, WR09X0432, WR09X0438, WR09X0466, WR09X0468, WR09X0470, WR09X0478, WR09X0479, WR09X0481, WR09X0484, WR09X0486, WR09X0487, WR09X0490, WR09X0495, WR09X0502, WR09X0503, WR09X0504, WR09X0526, WR09X0528, WR09X0576, WR09X0594, WR09X5161, WR09X5162, WR09X5163, WR09X5164, WR09X5192, WR09X5202, WR09X5204, WR09X5211, WR09X5225, WR9X10049, AH310869, EA310869, AP2061708, PS310869.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO WR60X10220 Refrigerator Condenser Fan Motor The XPARTCO WR60X10220 is an aftermarket replacement condenser fan motor for GE frost-free refrigerators with a condenser coil. This motor lives in the compressor/machine compartment at the back or bottom of the refrigerator. Whenever the compressor runs, this fan runs right along with it, circulating air through the refrigerator's grille to cool both the compressor and the condenser coils as they work. It also plays a secondary role in helping evaporate excess water that collects in the drain pan. Because the condenser fan cools the mechanical side of the refrigeration system rather than circulating cold air to your food, a failing motor tends to affect the whole refrigerator's cooling capacity rather than just one compartment. The harness and plug extend approximately 8" from the motor body. Common failure causes include worn motor bearings, dust and debris buildup around the coils restricting airflow, and general electrical wear over time. Symptoms include a refrigerator that runs warm overall, a hot cabinet area near the back or bottom of the unit, a squealing or grinding noise, or the compressor running constantly as it struggles to shed heat. It directly replaces AP4298602, 1257132, AH1766247, EA1766247, PS1766247, WR60X10133, WR60X10171, WR60X10192, and SM10220. Quick Answer The XPARTCO WR60X10220 Refrigerator Condenser Fan Motor fixes GE, Hotpoint, RCA, Kenmore, Haier, Monogram, and Café frost-free refrigerators with a hot cabinet area, squealing or grinding noise, or a fridge running warm overall. Harness and plug extend approximately 8" from the motor. Replaces AP4298602, 1257132, AH1766247, EA1766247, PS1766247, WR60X10133, WR60X10171, WR60X10192, SM10220. This cools the compressor and condenser coils — a different part and symptom pattern than an evaporator fan, which only affects internal air circulation to the food compartments. Common Problems This Part Fixes Refrigerator running warm overall, in both the fresh food and freezer compartments Hot cabinet area noticeable near the back or bottom of the refrigerator Squealing, grinding, or buzzing noise coming from the compressor compartment Refrigerator running constantly as the compressor struggles to shed heat Water pooling or not evaporating properly in the drain pan Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand Excessive dust or debris buildup visible around the condenser coils and fan Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10220, WR60X10133, WR60X10171, WR60X10192, 197D1871P026, IS-2321GEN, AH1766247, EA1766247, EAP1766247, AP4298602, AGE29216, PD00001198, PS1766247, SM10220 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This condenser fan motor is compatible with select GE, Hotpoint, and RCA frost-free refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform. Note — condenser fan, not evaporator fan: This motor cools the compressor and condenser coils in the machine compartment at the back or bottom of the refrigerator. It is a completely different part from an evaporator fan motor (such as our WR60X10185 or WR60X10318 listings), which sits behind the freezer's rear panel and circulates cold air to the food compartments. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs. Key Features Aftermarket replacement condenser fan motor — draws air across the condenser coils and compressor to remove system heat Resolves "hot cabinet area," "squealing or grinding noise," "runs warm overall," and "runs constantly" symptoms caused by fan failure Also helps evaporate excess water collecting in the drain pan Harness and plug extend approximately 8" from the motor body Sturdy construction built for long-term reliable performance Direct drop-in replacement matching the original mounting and blade fitment Replaces WR60X10133, WR60X10171, WR60X10192, AP4298602, 1257132, AH1766247, EA1766247, PS1766247, and SM10220 Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — typically under 30 minutes Product Specifications Part Number WR60X10220 OEM Part Number WR60X10220 Part Type Refrigerator Condenser Fan Motor Condition Aftermarket Replacement Brand GE Location Compressor/machine compartment (back or bottom of cabinet) Function Cools the condenser coils and compressor; aids drain pan evaporation Dimensions 2-1/2"H x 4"W x 11"D Harness/Plug Length Approx. 8" from motor Repair Difficulty Easy — under 30 minutes Quantity 1 fan motor Compatible Brands GE, Hotpoint, RCA, Kenmore, Haier, Monogram, Café Installation Notes ⚠️ Unplug Refrigerator Before Starting Shut off power at the circuit breaker or fuse box, then pull the refrigerator away from the wall and disconnect the power cord from the outlet. Wear work gloves. Remove the condenser fan motor cover, typically held on by two screws, to access the motor. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces symptoms similar to a failing motor and costs nothing to rule out. Photograph the wiring and the fan blade's position before disconnecting anything. Disconnect the power wire and the ground wire from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. If the old fan blade is seized onto the motor shaft, a firm, sudden strike (rather than steady pressure) will typically break the blade loose from the shaft without damaging the plastic blade, so it can be reused on the new motor. Mount the new WR60X10220 in the same position, reconnect the power and ground wires, and confirm the blade spins freely by hand without contacting the housing before reinstalling the fan cover. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned and any hot cabinet area or noise has resolved. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions My refrigerator has a hot spot on the cabinet and runs warm overall. Is this the right part? Yes, this is a classic symptom pair for a failing condenser fan motor. Without proper airflow across the condenser coils and compressor, heat builds up in the machine compartment (producing that hot cabinet area) while the whole refrigeration cycle loses efficiency, which shows up as both compartments running warmer than normal rather than just one. The old fan blade is stuck on the motor shaft. How do I remove it without breaking it? A gentle, steady pull often won't budge a seized blade, but a firm, sudden strike to the blade (rather than continuous pressure) will typically pop it loose from the metal shaft without damaging the plastic blade itself, so you can reuse it on the new motor if a blade isn't included. Work carefully and support the blade so it doesn't fall and crack once it releases. Could dirty condenser coils cause the same symptoms as a bad fan motor? Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix. Does this fan also affect my drain pan? Yes, indirectly. In addition to cooling the compressor and condenser coils, this fan helps evaporate excess water that collects in the drain pan beneath the refrigerator. If the fan has failed, you may notice water pooling or not evaporating as it normally would, in addition to the more obvious cooling and noise symptoms. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the mounting configuration, dimensions, and airflow performance of the original WR60X10220 condenser fan motor used in compatible GE, Hotpoint, RCA, Kenmore, Haier, Monogram, and Café refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE Product Description Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing. Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277. Compatibility: Compatible with models including but not limited to: LG: LSC24971ST/00, LRSC21934SW Kenmore: 79571039010, 79571039011, 79578789801 GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers. 🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals. 💪 Reliable Performance: Ensures precise activation of ice and water dispensing. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues. Product Specification Part Number: XPARTCO 6600JB3001E Component Type: Refrigerator dispenser micro switch Material: Plastic housing, metal contacts Electrical Rating: 16A 1/2HP, 125/250VAC Mounting: Snap-in or screw-mounted, 1/4" terminals Operating Conditions: Suitable for refrigerator dispenser environments Compliance: UL listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today! Add to cart now for a reliable fix!

Read more less

XPARTCO W10515057 Refrigerator LED Light & Cover Replaces WPW10515057 The XPARTCO W10515057 is an aftermarket replacement LED light and tapered lens cover assembly for Whirlpool, Kenmore, Maytag, KitchenAid, Inglis, and Ikea refrigerators. This assembly illuminates the interior of the refrigerator or freezer compartment, and includes both the LED light module and its protective tapered lens cover in one unit. Many of these refrigerators use three separate LED light boards — one at the top of the refrigerator compartment, one at the bottom, and one in the freezer — and a failure in any one of them can sometimes cause symptoms that appear elsewhere in the lighting system. Over time, individual LEDs on the board can burn out or begin to flicker. A failing light assembly typically shows up as a light that's dim, flickering, strobing, or not turning on at all, and in some cases, all the lights in the refrigerator strobing together even though only one board has actually failed. It directly replaces WPW10515057, W10398007, AP6022533, and PS11755866. Quick Answer The XPARTCO W10515057 Refrigerator LED Light & Cover fixes Whirlpool, Kenmore, Maytag, KitchenAid, Inglis, and Ikea refrigerators with a dim, flickering, or non-working interior light — including cases where all the lights in the fridge strobe together. Includes LED light module and tapered lens cover. Replaces WPW10515057, W10398007, AP6022533, PS11755866. If your whole refrigerator's lighting strobes when a door opens, the actual failed board may not be the most obvious one — check all three light positions (top and bottom of the fridge, plus the freezer) before assuming which one needs replacing. Common Problems This Part Fixes Interior light dim or flickering Interior light not turning on at all All refrigerator lights strobing together when a door opens Only some LEDs on the board lit, others dark Reduced visibility inside the refrigerator or freezer compartment Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator LED light and cover assembly directly replaces the following OEM and cross-reference part numbers: WPW10515057, W10515057, W10398007, AP6022533, AWP51164, EAP11755866, OEM18067608, PD00031142, PS11755866 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This LED light and cover assembly is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, KitchenAid, Inglis, and Ikea refrigerators built on the Whirlpool platform, including model numbers such as WRS325FDAT02, WRS325FDAM01, WRS325FDAM02, WRS325FDAM04, WRS331FDDB01, WRS331FDDW01, and WRS331FDDM01. Note: This assembly is a different part from the related W10515058 light board used elsewhere in the same lighting system on some models. If only one section of your refrigerator's lighting is affected, confirm which specific board position (top, bottom, or freezer) has failed before ordering, since a strobing or flickering symptom in one area can actually be caused by a different board. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which light assembly your refrigerator needs. Key Features Aftermarket replacement LED light and tapered lens cover assembly Resolves "dim or flickering light," "won't turn on," and "lights strobing together" symptoms Includes both the LED light module and its tapered lens cover Energy-efficient, long-lasting LED illumination Direct drop-in replacement matching the original mounting Replaces WPW10515057, W10398007, AP6022533, and PS11755866 Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Inglis, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards Easy installation — no specialized tools required Product Specifications Part Number W10515057 OEM Part Number WPW10515057 Part Type Refrigerator LED Light & Tapered Lens Cover Assembly Condition Aftermarket Replacement Function Illuminates the interior of the refrigerator or freezer compartment Includes LED light module, tapered lens cover Repair Difficulty Easy — no specialized tools required Quantity 1 LED light and cover assembly Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Inglis, Ikea Installation Notes ⚠️ Unplug Refrigerator Before Starting Disconnect power to the refrigerator before beginning to avoid electrical hazards. Wear work gloves, since some edges around the light housing can be sharp. Locate the light assembly you're replacing — check the top and bottom of the refrigerator compartment as well as the freezer, since your refrigerator may use more than one of these assemblies in different positions. Remove the lens cover from the housing, then disconnect the wiring harness from the LED board. Remove the mounting screws or clips securing the old assembly and take it out. Install the new W10515057 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Snap the tapered lens cover back into place. Restore power and confirm the light turns on normally with even, steady illumination and no flickering or strobing. Tools needed: Phillips screwdriver (model-dependent), work gloves. Frequently Asked Questions All the lights in my refrigerator strobe when I open a door. Which light do I actually need to replace? This is a well-documented and somewhat counterintuitive symptom. One customer experienced exactly this — all the refrigerator's lights strobing whenever either door opened — and initially assumed the top refrigerator compartment light was at fault. After ordering that part, a notice included in the packaging explained that if either of the other two LED lights (bottom of the refrigerator, or the freezer light) were bad, they could cause the same strobing symptom throughout the whole system. Checking further, they found the freezer light had 3 out of 4 LEDs strobing, and replacing that light — not the one they originally suspected — resolved the issue completely. If you're seeing this symptom, check all three light positions rather than assuming the most visible one is the cause. Does this include the plastic lens cover, or just the LED light? This listing includes both the LED light module and its tapered lens cover as a complete assembly. Some other sellers offer LED-only versions without the cover, so if you're comparing listings elsewhere, double check whether the cover is included. Is this a difficult repair? No, this is considered an easy installation with no specialized tools required, though it's worth taking normal care around the electrical connections and unplugging the refrigerator first to avoid any electrical hazard. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the LED module, tapered lens cover design, and mounting configuration of the original WPW10515057 assembly used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, Inglis, and Ikea refrigerators. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

6600JB3001C Refrigerator Dispenser Switch – Replacement for GE, LG and Kenmore Product Overview This Dispenser Switch is a replacement part for specific LG, Kenmore, GE refrigerator models. This switch is crucial for the functionality of the water and ice dispenser, as it activates the dispensing mechanism when the user presses the lever or button. The switch ensures that the refrigerator dispenses water or ice on demand, providing convenience and ease of use. Replaces Part Numbers This dispenser switch replaces part numbers 6600JB3001C, 1268245, 1395586, 6600JB3001B, 6600JB3001H, PD00025340, EAP3529276, AH3529276, EA3529276, AP4441530, PS3529276, WR23X10783, 2695743, WR23X10171, WR23X10224, AP5688654, PS8259956. Engineered to deliver OEM-level performance and compatibility. Compatible Brands Compatible with LG and Kenmore refrigerators manufactured by LG. Fits various French door, side-by-side, and bottom-freezer models with front panel dispensers. Fixes the Following Issues Water or ice dispenser not working Dispenser works only when pressed a certain way No power reaching water or ice components Intermittent or unresponsive dispenser control Why Buy from Parts‑O‑Matic Durable and reliable aftermarket replacement Fast and free U.S. shipping Simple to install with plug-in compatibility Trusted by appliance repair techs and homeowners

Read more less

5040JA2009B Genuine OEM LG Refrigerator Motor Damper Grommet (Front) The 5040JA2009B is a genuine LG OEM front evaporator motor grommet for LG and select Kenmore refrigerators, and also fits select freezers. This rubber grommet cushions and secures the front side of the evaporator fan motor's mount, reducing vibration and noise as the motor runs. It's the front-position counterpart to our 5040JA2004A rear grommet — LG mounts this evaporator fan motor from both the front and rear with matching grommets working together. Made of rubber, this grommet naturally degrades from prolonged use, exposure to the freezer's cold temperatures, or physical damage from an accidental impact during cleaning or organizing. Once it fails, the evaporator motor loses proper cushioning and can shift slightly out of alignment. Symptoms of a bad grommet include increased noise and vibration, particularly noticeable when the evaporator fan motor is running, along with a rattling or buzzing sound coming from the freezer area. It directly replaces AP4443769, 1268013, AH3526237, EA3526237, PS3526237, and 5040JQ2003B. Quick Answer The 5040JA2009B Genuine OEM LG Refrigerator Motor Damper Grommet (Front) fixes LG and select Kenmore refrigerators with increased noise or vibration from the evaporator fan motor, or a rattling/buzzing sound from the freezer area. Rubber, front-position grommet for the evaporator fan motor. Replaces AP4443769, 1268013, AH3526237, EA3526237, PS3526237, 5040JQ2003B. This is the front counterpart to our 5040JA2004A rear grommet — both support the same evaporator fan motor from opposite sides. Common Problems This Part Fixes Increased noise or vibration from the evaporator fan motor Rattling or buzzing sound coming from the freezer area Noise that's especially noticeable when the fan motor is running Evaporator motor that has shifted slightly out of alignment Visibly cracked, hardened, or damaged rubber grommet Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This motor damper grommet directly replaces the following OEM and cross-reference part numbers: 5040JA2009B, AP4443769, 1268013, AH3526237, EA3526237, PS3526237, 5040JQ2003B If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This front evaporator motor grommet is compatible with select LG refrigerators and freezers, and also fits select Kenmore refrigerators built on the LG platform, including model numbers such as LFXC24726S, LMXS30776S, LSC27950ST, LFC20760SB, LFX25960SB, and LFX28968ST/02. Note — front grommet, not rear: This is the front-position evaporator motor grommet. The matching rear-position grommet for the same motor is a separate part, our 5040JA2004A listing. Both are typically checked and often replaced together, since they support the same motor and are usually the same age. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine LG OEM part — factory-specified rubber compound and fit Cushions and secures the front side of the evaporator fan motor mount Resolves "increased motor noise," "vibration," and "rattling/buzzing from the freezer" symptoms Front-position counterpart to our 5040JA2004A rear grommet Durable rubber construction designed for the freezer's cold operating environment Direct drop-in replacement — no tools required for the grommet itself Replaces AP4443769, 1268013, AH3526237, EA3526237, PS3526237, and 5040JQ2003B Compatible with LG and select Kenmore refrigerators and freezers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 5040JA2009B Part Type Front Evaporator Motor Grommet Condition Genuine OEM Brand LG Material Rubber Function Cushions and secures the front side of the evaporator fan motor mount Position Front Related Part 5040JA2004A (rear-position grommet for the same motor, sold separately) Repair Difficulty Moderate — freezer teardown required for access Quantity 1 damper grommet Compatible Brands LG, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting — Photograph Wiring Before Disconnecting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access to the evaporator motor on many models requires going in through the freezer: empty the top half of the freezer, remove the side rails holding the ice bin, then remove the outer screws holding the ice auger assembly — on many models this means only the two outer screws on each side, not the middle ones. With the ice maker components clear, remove the rear panel to access the evaporator fan motor and its front and rear grommets. Photograph the wiring connections carefully before disconnecting anything, since several wires can look interchangeable but are not, and reconnecting one in reverse can cause a malfunction. Remove the old front grommet from the motor mount — it typically pulls free without tools. Press the new 5040JA2009B grommet into the same position, seating it fully. If the rear grommet is also worn, this is a good time to replace it as well since you already have access. Reassemble the ice maker components, rear panel, and any other parts removed for access, restore power, and run the refrigerator for a while to confirm the noise or vibration has resolved. Tools needed: Phillips screwdriver, work gloves. Frequently Asked Questions Should I replace the rear grommet at the same time as this front one? It's worth considering. Both grommets support the same evaporator fan motor from opposite sides and are typically the same age, so if one has degraded, the other is often not far behind. Since accessing the motor for this repair already requires a fair amount of teardown, replacing both together — our 5040JA2004A rear grommet and this front one — saves you from repeating the same access work again soon after. Why do I need to go through the ice maker to reach this part? On many LG refrigerator models, the evaporator fan motor and its grommets sit behind the freezer's ice maker assembly, so reaching them requires removing the ice bin, its side rails, and the auger mechanism first. This is a more involved access path than some other freezer repairs, so budget extra time and take photos as you go to keep track of how everything reassembles. Why is it so important to photograph the wiring before disconnecting? Several of the wires in this area can look similar and are easy to connect in reverse or in the wrong position, which can cause a malfunction after reassembly. Taking clear photos of each connection before you disconnect anything is a simple step that prevents a frustrating troubleshooting session later. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original rubber compound and mounting fit of the front evaporator motor grommet originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

5304523741 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling efficiently with the 5304523741 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved replacement circulates cold air from the evaporator throughout the refrigerator and freezer compartments. A failing fan motor can cause uneven temperatures, frost buildup, or warm sections in your fridge. Installing this genuine OEM part ensures quiet, dependable air circulation and consistent cooling performance. Replaces Part Numbers 5304523741, AP6983831, EAP12746805, 4960926, PD00067011, PS12746805. Compatibility This genuine OEM fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFSS2615TS0, Electrolux LFHB2751TF, and Kenmore 253.70313214. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved motor for reliable cooling performance ❄️ Efficient Air Circulation – Distributes cold air evenly throughout the compartments 💰 Energy-Efficient Operation – Restores temperature consistency and reduces compressor strain 🛠️ DIY Friendly – Direct-fit replacement installs in minutes 🛡️ Fixes Common Issues – Solves warm freezer, frost buildup, or noisy fan motor problems 📐 Product Specification Part Number: 5304523741 Component Type: Refrigerator Evaporator Fan Motor Material: Metal and high-temperature plastic housing Mounting: Direct-fit replacement in freezer compartment Operating Conditions: Designed for continuous low-temperature operation Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove freezer shelves and back panel. Locate and disconnect the wiring harness from the old fan motor. Remove mounting screws and take out the old motor and fan blade. Transfer the fan blade (if required) to the new 5304523741 motor. Mount the new motor, reconnect wiring, and reinstall back panel. Restore power and confirm even cooling and quiet operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧊 Genuine OEM Replacement Part 🔄 30-Day Return Policy Keep your refrigerator running at peak performance — Add to Cart Now for a genuine, factory-approved repair!

Read more less

W10500004 Genuine OEM Whirlpool Refrigerator Bottom Door Hinge & Cam Kit (Right, Gray) The W10500004 is a genuine Whirlpool OEM bottom door hinge and closing cam kit for the right side fresh food door on Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators. This kit combines two related components: the bottom hinge, which supports the door's weight and lets it swing open and closed, and the closing cam, a plastic component that gives the door its final "pull" to close firmly on its own once you've pushed it most of the way shut. Finished in Apollo Gray, this kit measures approximately 4.65" x 4.49" x 2.24" and weighs about 0.34 lbs. The plastic closing cam is the part most prone to wear — after years of use it can flatten out or crack, losing the contoured shape that pulls the door the rest of the way closed. A worn cam or hinge typically shows up as a door that won't close fully on its own unless you push it firmly shut, or a door that feels loose, sags, or doesn't swing smoothly on its hinge. It directly replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, and W10257209. Quick Answer The W10500004 Genuine OEM Whirlpool Refrigerator Bottom Door Hinge & Cam Kit (Right, Gray) fixes Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators where the right-side fresh food door won't close on its own unless pushed firmly shut, or the door feels loose or sags on its hinge. Apollo Gray finish. Replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, W10257209. Mounting the closing cam requires a new screw, sold separately — the kit does not include it. Common Problems This Part Fixes Refrigerator door won't close fully on its own — has to be pushed firmly shut Door that feels loose, sags, or doesn't swing smoothly on its hinge Worn or flattened closing cam that no longer pulls the door shut Visible cracks or wear on the plastic closing cam Door that doesn't seal properly due to incomplete closing Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator bottom door hinge and cam kit directly replaces the following OEM and cross-reference part numbers: 2684526, W10249949, W10257197, W10257209, AP5656407, AWP40907, EAP5573850, PD00024325, PS5573850 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This bottom door hinge and cam kit is compatible with select Whirlpool refrigerators, and also fits select Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators built on the Whirlpool platform, as well as select Kenmore Elite and Ikea refrigerators, including model numbers such as 3WSC19D4AY00, 3WSC19D4XW00, 3WSC19D4XD00, 3WSC19D4XB00, 3WSC20N4XB00, and 3WSC20N4XW00. Note — right side only: This kit is specific to the right-side fresh food door. A separate kit exists for the left side. This is also the lower door's hinge and cam kit — the upper door's closing cam is a different part sold separately. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which hinge kit your refrigerator needs. Key Features Genuine Whirlpool OEM part — factory-specified hinge and cam design Combined kit — bottom hinge plus closing cam in one part Resolves "door won't close on its own," "door feels loose," and "worn or cracked cam" symptoms Apollo Gray finish Approximately 4.65" x 4.49" x 2.24", 0.34 lbs Direct drop-in replacement for the right-side lower door hinge and cam Replaces AP5656407, 2684526, PS5573850, W10249949, W10257197, and W10257209 Compatible with Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, and Admiral refrigerators Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number W10500004 Part Type Bottom Door Hinge & Closing Cam Kit Condition Genuine OEM Brand Whirlpool Door Position Right side, fresh food door, lower hinge Color Apollo Gray Dimensions 4.65" x 4.49" x 2.24" Weight 0.34 lbs Additional Hardware Needed New cam mounting screw (sold separately) Repair Difficulty Moderate — door removal required Quantity 1 hinge and cam kit Compatible Brands Whirlpool, Amana, KitchenAid, Maytag, Jenn-Air, Magic Chef, Roper, Admiral, Kenmore Elite, Ikea Installation Notes ⚠️ Unplug Refrigerator Before Starting — A New Cam Mounting Screw Is Required, Sold Separately Disconnect power at the outlet before beginning. Wear work gloves. Remove the top hinge cover, then remove the top hinge support to free the top of the door. Lift the door up and off the bottom hinge support to remove it completely — this is easier with a second person supporting the door's weight. Remove the old, worn closing cam and hinge from the bottom support. The manufacturer specifies that mounting the new closing cam requires a new screw, which is not included in this kit and must be ordered separately. Install the new W10500004 hinge and cam onto the bottom support, applying a small amount of lubricant such as petroleum jelly to the cam surface to help it move smoothly against the door once reassembled. Set the door back onto the bottom hinge support, making sure it seats correctly on the new cam. Reinstall the top hinge support and top hinge cover. Restore power and test the door by opening it partway and letting go — it should swing the rest of the way closed on its own if the cam is seated and lubricated correctly. Tools needed: 5/16" nut driver or socket, ratchet, small flat-blade screwdriver, work gloves. Frequently Asked Questions My door won't close all the way unless I push it. Is this the right part? Yes, this is the classic symptom of a worn closing cam. When the cam is new, its contoured shape gives the door that final "pull" to swing closed on its own once you've pushed it most of the way shut. As the cam wears flat or cracks over years of use, it loses that pulling action, leaving the door to stay open unless you close it firmly by hand. Do I need to buy anything else along with this kit? Yes — per Whirlpool's own specifications, mounting the new closing cam requires a new mounting screw, which is sold separately and not included in this kit. Order that screw at the same time to avoid a delay partway through the repair. Should I lubricate anything during installation? Yes, it's recommended. Applying a small amount of lubricant, such as petroleum jelly, to the cam surface helps it move smoothly against the door once everything is reassembled, and can extend the life of the new cam by reducing friction wear. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original hinge design, cam shape, and Apollo Gray finish of the bottom door hinge and cam kit originally installed on your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Choice Refrigerator Replacement Part Choice W10515057 Refrigerator LED Light & Cover Replaces WPW10515057 Aftermarket 1-plug LED light module with tapered lens/cover for select Whirlpool-family side-by-side refrigerators. Product Overview The Choice W10515057 Refrigerator LED Light & Cover is an aftermarket replacement for Whirlpool WPW10515057. The assembly combines the LED light module with its tapered lens/cover to restore interior refrigerator illumination. This part is commonly used in select Whirlpool, Maytag, KitchenAid, Kenmore, and related side-by-side refrigerators. Quick Answer W10515057 / WPW10515057 is the 1-plug LED light and tapered lens/cover assembly. If your refrigerator uses a similar LED with 2 electrical plugs, verify the model before ordering because the related WPW10515058 configuration is different. Common Problems This Part May Fix Refrigerator interior light does not turn on LED light flickers or flashes Interior lighting is dim or intermittent Existing LED lens/cover is damaged One compartment light causes other linked LEDs to flicker Replaces and Cross-References WPW10515057, W10515057, W10398007, AP6022533, AWP51164, EAP11755866, OEM18067608, PD00031142, PS11755866 Cross-reference numbers are provided for identification. Choice is an aftermarket replacement brand and is not manufactured by Whirlpool Corporation. Compatibility Fits select Whirlpool, Maytag, KitchenAid, Kenmore, IKEA, and related refrigerator models. Verified examples include: WRS325FDAD02 WRS322FDAB00 WRS322FDAM04 WRS331FDDB00 WRS335FDDW01 WRS342FIAB04 WRS537SIAM00 KSF22C4CYY01 MSF25D4MDE03 ISF25D2XBM01 106.41159212 106.51124211 Important: This is only a partial compatibility list. Verify the complete refrigerator model number and the connector configuration before ordering. Key Features Quality Choice aftermarket replacement Replaces Whirlpool WPW10515057 LED light module with tapered lens/cover 1-plug electrical configuration White bezel / cover design Direct plug-in replacement on compatible models Product Specifications Choice Part Number W10515057CM Replaces OEM Number WPW10515057 Part Type Refrigerator LED Light & Cover Assembly Connector 1 electrical plug / 2-pin style connection Lens Style Tapered lens/cover Color White bezel Condition New Part Quality Aftermarket Replacement Installation Notes Disconnect refrigerator power before servicing. Locate the failed LED module and gently release the lens/bezel retaining tabs. Disconnect the existing electrical plug without pulling on the wires. Compare the connector and mounting shape with the replacement before installation. Connect the replacement LED module and snap the assembly securely into place. Restore power and confirm normal illumination. Diagnostic note: On some Whirlpool-family refrigerators, multiple LED modules are connected in the lighting circuit. One failed module can cause other lights to flicker or remain off. Verify the failed module before replacing parts. Frequently Asked Questions Does this include the LED light and cover? Yes. This listing is for the W10515057-style LED light module with its tapered lens/cover assembly. Does this replace WPW10515057? Yes. This Choice part is designed as an aftermarket replacement for WPW10515057 and earlier W10515057/W10398007 references. What is the difference between WPW10515057 and WPW10515058? WPW10515057 uses the 1-plug configuration. WPW10515058 is a different related LED configuration with 2 electrical plugs. Verify your refrigerator model and original connector before ordering. Is this a Genuine Whirlpool OEM part? No. This is a new Choice aftermarket replacement designed to replace the listed OEM part numbers. Shop With Confidence Verify the complete refrigerator model number before ordering. Our compatibility team can help confirm whether W10515057 / WPW10515057 is the correct LED module for your appliance. Choice Replacement LED Light + Cover 1-Plug Configuration Compatibility Support

Read more less

4975JA2028A Refrigerator Drawer Slide Rail Refrigerator drawer rail guide assembly Can be used on right-hand or left-hand side of drawer. Allows the drawer to operate smoothly  Fits specific LG, Kenmore refrigerator Models. Replaces Part Numbers: 4975JA2028A,  AH3524806, EA3524806, AP4442249, PS3524806. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov  

Read more less

DA32-00011E Refrigerator Temperature Sensor Replaces Part Numbers: DA32-00011E, DA32-00006N, AP4140987, PS4138598.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

6615JB2005H Refrigerator Defrost Sensor – Replacement for LG and Kenmore Product Overview The 6615JB2005H Refrigerator Defrost Sensor is an aftermarket replacement designed to monitor freezer temperature during defrost cycles. A faulty sensor can cause frost buildup, cooling issues, or prevent defrosting altogether. This sensor helps ensure the defrost heater activates at the right time, protecting your evaporator from excessive ice accumulation and maintaining consistent refrigerator performance. Replaces Part Numbers This sensor replaces 6615JB2005H, 1266868, 6615JB2005M, AH3529340, EA3529340, AP4438477, PS3529340. It is engineered to match OEM specifications for performance and fit in compatible LG and Kenmore models. Compatible Brands This defrost sensor is compatible with refrigerators made by LG and Kenmore (models manufactured by LG). It fits a variety of side-by-side, bottom freezer, and French door configurations. Fixes the Following Issues Frost or ice buildup in freezer Defrost cycle not activating Refrigerator not cooling properly Temperature fluctuation or error codes Why Buy from Parts‑O‑Matic Affordable, high-quality aftermarket solution Fast and free shipping throughout the U.S. Trusted by appliance repair professionals and DIYers Simple installation and reliable performance

Read more less