Search results for "Charcoal Filter"

(2 Pack) WB02X11124CM Microwave Charcoal Filter 3-7/8" x 3-7/8" x 6-1/8" carbon filter. Fits GE over counter microwaves. Replaces Part Numbers: WB02X11124, 1084770, AH952091, EA952091, JX81J, AP3791810, PS952091.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

(2 Pack) WB02X11550CM Microwave Charcoal Filter 2-3/8" x 10-1/4" x 3/8" carbon filter. Fits GE over counter microwaves. Replaces Part Numbers: WB02X11550, 2973524, AP5788200, PS8746150, WB02X28929.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WB02X11550CM Microwave Charcoal Filter 2-3/8" x 10-1/4" x 3/8" carbon filter. Fits GE over counter microwaves. Replaces Part Numbers: WB02X11550, 2973524, AP5788200, PS8746150, WB02X28929.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

T33 Inline Activated Carbon Post Filter    

Read more less

XPARTCO DE63-00666A Microwave Grease Filter The XPARTCO DE63-00666A is an aftermarket replacement aluminum mesh grease filter for Samsung, GE, and Kenmore over-the-range microwaves. This 12-layer aluminum mesh filter sits in the vent opening on the bottom of the microwave and captures airborne grease from cooking below before it can be pulled into the microwave's internal fan, motor, and electronics. Over time the mesh becomes saturated with grease and cooking residue, which restricts airflow, reduces the range hood function's effectiveness, and — if left unreplaced — creates a fire hazard from trapped, hardened grease. This is a direct-fit aftermarket replacement built to the same dimensions and 12-layer mesh construction as the original filter. Regular replacement (most manufacturers recommend every 1–2 years depending on cooking frequency) keeps ventilation performance up and reduces fire risk. Quick Answer The XPARTCO DE63-00666A Microwave Grease Filter fixes reduced range-hood suction, lingering cooking odors/smoke, or a visibly grease-clogged filter on Samsung, GE, and Kenmore over-the-range microwaves. 12-layer aluminum mesh, approx. 6-3/4" x 6-3/8". Classic symptom: weaker venting over the stovetop, or a filter that looks dark, gummy, or saturated with grease. Common Problems This Part Fixes Weak or reduced range-hood ventilation over the stovetop Lingering smoke, steam, or cooking odors that don't clear Visibly clogged, discolored, or grease-saturated filter mesh Increased fire risk from accumulated grease buildup Microwave fan sounds like it's working harder than normal Grease dripping or residue visible around the vent opening Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This grease filter directly replaces the following part numbers: DE63-00666A, AP5306190, ASM36232, EAP4228252, PD00031284, PS4228252, WB02X11534, 2309683, AP5331907, 2218485, AGE21451, AH3506741, EA3506741, PD00035255, PS3506741 AP5306190 was the earlier part number for this filter, later superseded by DE63-00666A under Samsung's current numbering. WB02X11534 is the equivalent GE-branded part number for the same physical filter design. Note: DE63-00367G is a separate charcoal/carbon odor filter often sold alongside this aluminum grease filter for ductless (recirculating) installations. It is a different part and is not interchangeable with this grease filter — do not confuse the two when ordering. Compatibility This grease filter is compatible with the following Samsung and Kenmore over-the-range microwave models: Samsung: CVM517P2M1S1, CVM521P2M1S1, DVM7195BL2TS, JNM7196DK4BB/WW, JVM-1950BTC01/STC01/WTC01, JVM7195DK4BB/WW, MC17J8000CG/CS, MC17J8100CS, MC17T8000CG/CS, ME16A4021AB/AS/AW, ME16H702SEB/SES Kenmore: 40185052010, 40185052210, 40185052310, 40185053010, 40185053210, 40185053310, 40185059010, 40185059210 Note: Via the equivalent WB02X11534 part number, this same filter design is also used on select GE over-the-range microwaves. We were not able to confirm a specific GE model list at this time — if your microwave is GE-branded, compare your existing filter's dimensions (approximately 6-3/4" x 6-3/8") against this listing, or contact our support team with your model number to verify before ordering. Key Features Direct-fit aftermarket replacement grease filter for Samsung, GE, and Kenmore over-the-range microwaves 12-layer aluminum mesh construction traps airborne grease before it reaches internal components Helps maintain proper range-hood ventilation performance Reduces fire risk from accumulated grease buildup No tools required — simple slide-in/slide-out installation Aftermarket replacement built to OEM-equivalent dimensions and mesh layer count Product Specifications Part Number XPDE63-00666A OEM Part Number DE63-00666A Part Type Microwave Aluminum Mesh Grease Filter Condition Aftermarket Replacement Filter Construction 12-Layer Aluminum Mesh Dimensions Approx. 6-3/4" W x 6-3/8" H x 1/4" Thick Application Samsung, GE & Kenmore Over-the-Range Microwaves Recommended Replacement Interval Every 1–2 Years (Cooking-Frequency Dependent) Installation Notes ℹ️ No Tools Required Unplug the microwave or switch off its circuit breaker before beginning, as a safety precaution. Locate the grease filter along the bottom vent opening of the microwave — it typically has a small tab or handle and slides straight out once released from its retaining clips. Remove the old filter and note its orientation. Slide the new filter into the same position and orientation, pressing gently until it clicks or seats into the retaining clips. No screwdriver or other tools are needed. For best results, clean or replace this filter regularly, especially if you cook frequently or fry foods often, since grease buildup accelerates with heavier cooking use. Frequently Asked Questions How do I know if my grease filter needs replacing? Look for a mesh filter that appears dark, gummy, or heavily coated with grease residue, or notice reduced ventilation performance and lingering cooking smoke or odors. Most manufacturers recommend replacing this filter every 1–2 years depending on how often you cook. Can I wash and reuse the grease filter instead of replacing it? Some aluminum mesh grease filters can be hand-washed with degreasing dish soap, but heavily saturated or discolored filters lose effectiveness over time even after washing. If yours is old, warped, or has visible buildup that won't clean out, replacement is the more reliable fix. Is this the same as the charcoal/odor filter? No. This is the aluminum mesh grease filter, which traps grease particles. The charcoal/carbon filter (DE63-00367G) is a separate component used for odor control in ductless recirculating installations. They are not interchangeable — check which one your microwave uses before ordering. Will this fit my GE microwave? This filter design is also sold under the GE part number WB02X11534 for the same physical filter. We don't have a confirmed GE model list, so compare your existing filter's dimensions against this listing or contact our support team with your model number to verify before ordering. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

2 Pack - XPARTCO DE63-00666A Microwave Grease Filter The XPARTCO DE63-00666A is an aftermarket replacement aluminum mesh grease filter for Samsung, GE, and Kenmore over-the-range microwaves. This 12-layer aluminum mesh filter sits in the vent opening on the bottom of the microwave and captures airborne grease from cooking below before it can be pulled into the microwave's internal fan, motor, and electronics. Over time the mesh becomes saturated with grease and cooking residue, which restricts airflow, reduces the range hood function's effectiveness, and — if left unreplaced — creates a fire hazard from trapped, hardened grease. This is a direct-fit aftermarket replacement built to the same dimensions and 12-layer mesh construction as the original filter. Regular replacement (most manufacturers recommend every 1–2 years depending on cooking frequency) keeps ventilation performance up and reduces fire risk. Quick Answer The XPARTCO DE63-00666A Microwave Grease Filter fixes reduced range-hood suction, lingering cooking odors/smoke, or a visibly grease-clogged filter on Samsung, GE, and Kenmore over-the-range microwaves. 12-layer aluminum mesh, approx. 6-3/4" x 6-3/8". Classic symptom: weaker venting over the stovetop, or a filter that looks dark, gummy, or saturated with grease. Common Problems This Part Fixes Weak or reduced range-hood ventilation over the stovetop Lingering smoke, steam, or cooking odors that don't clear Visibly clogged, discolored, or grease-saturated filter mesh Increased fire risk from accumulated grease buildup Microwave fan sounds like it's working harder than normal Grease dripping or residue visible around the vent opening Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This grease filter directly replaces the following part numbers: DE63-00666A, AP5306190, ASM36232, EAP4228252, PD00031284, PS4228252, WB02X11534, 2309683, AP5331907, 2218485, AGE21451, AH3506741, EA3506741, PD00035255, PS3506741 AP5306190 was the earlier part number for this filter, later superseded by DE63-00666A under Samsung's current numbering. WB02X11534 is the equivalent GE-branded part number for the same physical filter design. Note: DE63-00367G is a separate charcoal/carbon odor filter often sold alongside this aluminum grease filter for ductless (recirculating) installations. It is a different part and is not interchangeable with this grease filter — do not confuse the two when ordering. Compatibility This grease filter is compatible with the following Samsung and Kenmore over-the-range microwave models: Samsung: CVM517P2M1S1, CVM521P2M1S1, DVM7195BL2TS, JNM7196DK4BB/WW, JVM-1950BTC01/STC01/WTC01, JVM7195DK4BB/WW, MC17J8000CG/CS, MC17J8100CS, MC17T8000CG/CS, ME16A4021AB/AS/AW, ME16H702SEB/SES Kenmore: 40185052010, 40185052210, 40185052310, 40185053010, 40185053210, 40185053310, 40185059010, 40185059210 Note: Via the equivalent WB02X11534 part number, this same filter design is also used on select GE over-the-range microwaves. We were not able to confirm a specific GE model list at this time — if your microwave is GE-branded, compare your existing filter's dimensions (approximately 6-3/4" x 6-3/8") against this listing, or contact our support team with your model number to verify before ordering. Key Features Direct-fit aftermarket replacement grease filter for Samsung, GE, and Kenmore over-the-range microwaves 12-layer aluminum mesh construction traps airborne grease before it reaches internal components Helps maintain proper range-hood ventilation performance Reduces fire risk from accumulated grease buildup No tools required — simple slide-in/slide-out installation Aftermarket replacement built to OEM-equivalent dimensions and mesh layer count Product Specifications Part Number XPDE63-00666A OEM Part Number DE63-00666A Part Type Microwave Aluminum Mesh Grease Filter Condition Aftermarket Replacement Filter Construction 12-Layer Aluminum Mesh Dimensions Approx. 6-3/4" W x 6-3/8" H x 1/4" Thick Application Samsung, GE & Kenmore Over-the-Range Microwaves Recommended Replacement Interval Every 1–2 Years (Cooking-Frequency Dependent) Installation Notes ℹ️ No Tools Required Unplug the microwave or switch off its circuit breaker before beginning, as a safety precaution. Locate the grease filter along the bottom vent opening of the microwave — it typically has a small tab or handle and slides straight out once released from its retaining clips. Remove the old filter and note its orientation. Slide the new filter into the same position and orientation, pressing gently until it clicks or seats into the retaining clips. No screwdriver or other tools are needed. For best results, clean or replace this filter regularly, especially if you cook frequently or fry foods often, since grease buildup accelerates with heavier cooking use. Frequently Asked Questions How do I know if my grease filter needs replacing? Look for a mesh filter that appears dark, gummy, or heavily coated with grease residue, or notice reduced ventilation performance and lingering cooking smoke or odors. Most manufacturers recommend replacing this filter every 1–2 years depending on how often you cook. Can I wash and reuse the grease filter instead of replacing it? Some aluminum mesh grease filters can be hand-washed with degreasing dish soap, but heavily saturated or discolored filters lose effectiveness over time even after washing. If yours is old, warped, or has visible buildup that won't clean out, replacement is the more reliable fix. Is this the same as the charcoal/odor filter? No. This is the aluminum mesh grease filter, which traps grease particles. The charcoal/carbon filter (DE63-00367G) is a separate component used for odor control in ductless recirculating installations. They are not interchangeable — check which one your microwave uses before ordering. Will this fit my GE microwave? This filter design is also sold under the GE part number WB02X11534 for the same physical filter. We don't have a confirmed GE model list, so compare your existing filter's dimensions against this listing or contact our support team with your model number to verify before ordering. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM W11844302 Refrigerator Filter Head The W11844302 is a genuine OEM water filter head assembly for Whirlpool refrigerators, and the current part number that supersedes the earlier W11808483. The filter head is the fitting inside the refrigerator that holds the water filter and routes incoming water through it to the water dispenser and ice maker. When the head cracks, leaks, or no longer seats the filter correctly, you can see water at the filter, lose flow to the dispenser or ice maker, or find the filter will not lock in or seal. This is a genuine OEM part from Whirlpool, not an aftermarket equivalent, so the fit and the filter connection match what came with the refrigerator. It is the filter head only. The water filter itself is a separate part and is sold separately. Quick Answer The Genuine OEM W11844302 Filter Head fixes a Whirlpool refrigerator whose filter head is cracked, leaking, or no longer holding or sealing the water filter. Genuine OEM, the current number superseding W11808483 and a long list of earlier Whirlpool filter head numbers. Classic symptom: water dripping around the filter, a filter that won't lock in or seal, or reduced water flow to the dispenser and ice maker. Common Problems This Part Fixes Water leaking from or around the filter head Water filter won't lock in or seal properly Reduced or no water from the dispenser or ice maker traced to the filter head Cracked, broken, or damaged filter head housing Worn filter connection that no longer holds the filter securely Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This filter head replaces the following part numbers: W11844302, W11346623, W11808483, 12590620, 12590621, 12590622, W10605367, W10861009, WPW10605367, 12590618, W10609243, W11308018, W11791385, AP8114280, AWP1598415. W11844302 is the newest number for this filter head, superseding W11808483. The rest are earlier Whirlpool numbers for it. The source list continues beyond those shown, so additional numbers may exist. If your old filter head or parts diagram shows any of them, match against this list. Compatibility This filter head is listed for: Whirlpool refrigerators, including WRF535SWHZ Note: Filter heads differ between refrigerator models and generations, and no full model list is published for this part. Before ordering, compare your old filter head and its mounting against the Replaces list and your parts diagram, or contact our support team with your model number and we'll verify fit. This is the filter head only. The water filter is sold separately. Key Features Genuine OEM Whirlpool water filter head assembly, not an aftermarket equivalent Current part number, superseding W11808483 and a long list of earlier Whirlpool filter head numbers Restores a secure, leak-free filter connection Filter head only. Water filter sold separately Product Specifications Part Number W11844302 OEM Part Number W11844302 Supersedes W11808483 Part Type Refrigerator Water Filter Head Assembly Condition Genuine OEM Manufacturer Whirlpool Included Filter Head Only Application Select Whirlpool Refrigerators Installation Notes ⚠️ Shut Off Water and Unplug Power Turn off the water supply to the refrigerator and unplug it before starting. Remove the water filter, and have towels ready since some water will remain in the lines. Following your model's service guide, disconnect the water lines from the filter head and remove the screws or fasteners holding it to the refrigerator. Note how the lines and mounting are arranged, install the new filter head in the same position, and reconnect the lines securely. Install the water filter, restore water and power, and check every connection for leaks. Run water through the dispenser for several minutes to flush air from the lines, and check again for leaks. Frequently Asked Questions My water filter leaks or won't seal. Is this the part I need? It can be. Check first that the filter is the correct one for your model and is fully seated. If the filter fits correctly but still leaks, or the head itself is cracked or damaged, replacing the filter head should fix it. Does this include the water filter? No. This is the filter head only. The water filter is sold separately. My old filter head is marked W11808483, W10861009, or W11346623. Will this work? All three numbers are on the Replaces list. Because filter heads vary between models, compare your old head and its mounting against this one, or contact our support team with your model number and we'll confirm before you order. Is this a genuine Whirlpool part? Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

ADQ56656401 Genuine OEM LG Dryer Lint Screen The ADQ56656401 is a genuine LG OEM lint filter screen for LG and select Kenmore Elite front-load dryers. This is the removable screen that sits in the lint trap opening at the top of the dryer, catching lint and fabric fibers out of the exhaust airflow before they can reach the vent duct. Keeping this screen intact and free of buildup is one of the most important things you can do for your dryer's performance — a torn, missing, or heavily clogged screen doesn't just slow drying, it lets more lint travel downstream into the ducting, which is a well-documented fire risk factor for dryers generally. Built with an ABS plastic frame and a stainless steel mesh screen, this filter measures approximately 11.9" x 10.9". Over time the mesh can tear, the frame can crack, or the screen can simply wear out and stop trapping lint as effectively as it should. A worn or damaged lint screen typically shows up as drying times that have crept longer than they used to, visible lint on clean clothes, or a screen that's visibly torn, bent, or missing sections of mesh. It directly replaces AP4457244, 1462822, AH3531962, EA3531962, and PS3531962. Quick Answer The ADQ56656401 Genuine OEM LG Dryer Lint Screen fixes LG and select Kenmore Elite front-load dryers with a torn, cracked, missing, or heavily worn lint filter, showing up as longer drying times or lint on clean clothes. ABS frame with stainless steel mesh, approximately 11.9" x 10.9". Replaces AP4457244, 1462822, AH3531962, EA3531962, PS3531962. Not the same filter as ADQ56656403, which is a slightly smaller (11.2" x 10.9") screen used on LG WashTower models. Common Problems This Part Fixes Drying times that have gradually gotten longer than they used to Lint visible on clean clothes after a cycle Lint screen visibly torn, cracked, or missing sections of mesh Screen frame that's cracked, warped, or won't seat properly in the trap opening Reduced airflow through the dryer overall Lint screen that has gone missing and needs straightforward replacement Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer lint screen directly replaces the following OEM and cross-reference part numbers: ADQ56656401, AP4457244, EAP3531962, PS3531962, ALG52875, PD00001720, AH3531962, EA3531962 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This lint screen is compatible with select LG front-load dryers, and also fits select Kenmore Elite dryers built on the LG platform, including model numbers such as: DLE3170W, DLE3400W, DLE3500W, DLE3600V, DLE3050W DLEX3360V, DLEX3370V, DLEX3370W, DLEX3370R, DLEX3470V, DLEX3470W, DLEX3570V, DLEX3570W, DLEX3700V, DLEX3700W, DLEX3900W, DLEX4370K, DLEX3001R DLG3171W, DLG3401W, DLGX3361R, DLGX3361V, DLGX3361W, DLGX3371V, DLGX3371W, DLGX3471W, DLGX4271W, DLGX3002R DLE2601R, DLE2601W, DLE2701V, DLEX2801L, DLEX2801R, DLEX2801W, DLEX2901V, DLEX3001W, DLEX3001P, DLEX3875V, DLEX3875W DLG2602R, DLG2602W, DLG2702V, DLGX2802L, DLGX2902V, DLGX3002P, DLGX3002W, DLGX3876V Kenmore Elite RN1308AS, RN1308BS, RN1308CS, RN1310A, RN1310AS, RN1310B, RN1310BS, RN1310DS, RN1319E, RN1319VS, RN1321VS, RV1308AS, RV1308BS, RV1308CS, RV1310A, RV1310AS, RV1310B, RV1310BS, RV1310DS, RV1319E, RV1319VS, RV1321AS, RV1321VS Note — not the same as ADQ56656403: This lint screen is approximately 11.9" x 10.9". A similarly-numbered part, ADQ56656403, is a slightly smaller 11.2" x 10.9" screen used on LG WashTower models such as DLEX4000W, DLGX4001W, DLGX4201B, and DLGX4201W. The two are not interchangeable. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which lint screen fits your dryer. Key Features Genuine LG OEM part — factory-specified frame dimensions and mesh density ABS plastic frame with a stainless steel mesh screen for durability Resolves "longer drying times," "lint on clean clothes," and "torn or missing screen" symptoms Traps lint and fabric fibers before they reach the exhaust ducting Approximately 11.9" x 10.9" Direct drop-in replacement — lifts out and in with no tools required Replaces AP4457244, 1462822, AH3531962, EA3531962, and PS3531962 Compatible with LG and select Kenmore Elite front-load dryers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number ADQ56656401 Part Type Dryer Lint Screen / Filter Condition Genuine OEM Brand LG Frame Material ABS plastic Screen Material Stainless steel mesh Dimensions Approx. 11.9" x 10.9" Location Lint trap opening, top of dryer Repair Difficulty Very Easy — no tools required Quantity 1 lint screen Compatible Brands LG, Kenmore Elite Installation Notes This is a simple, tool-free repair. With the dryer unplugged or off, locate the lint trap opening at the top of the dryer and pull the old lint screen straight up and out. Line up the new ADQ56656401 screen with the same opening and slide it back down into place until it seats fully and sits flush. There's no need to disconnect power for this repair, but it's good practice to do so if you're also cleaning out the trap housing itself. While the screen is out, take a moment to wipe down the inside of the lint trap housing to clear any accumulated lint before reinserting the new screen. Tools needed: none. Frequently Asked Questions My drying times have gotten longer. Is a worn lint screen really the cause? It's one of the most common and easiest-to-fix causes. A torn or heavily worn screen lets lint pass through into the ducting instead of being caught, which restricts airflow further downstream and makes the dryer work harder to move air. Combined with regularly cleaning the screen after every load, a fresh screen in good condition helps restore normal drying times. Is it actually important to replace a torn lint screen, or is it just cosmetic? It's worth replacing rather than continuing to use a damaged screen. A torn or heavily worn lint filter lets more lint travel past it into the dryer's internal ducting and exhaust path, and lint buildup in that ducting is a well-documented dryer fire risk factor. Combined with never running the dryer without a lint filter in place at all, keeping the screen in good condition is a simple, inexpensive way to reduce that risk. Do I need any tools to replace this? No. The lint screen simply lifts straight out of its slot and the new one slides straight back in — no tools, no disassembly required. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original frame dimensions, mesh material, and fit of the lint screen originally installed in your LG or Kenmore Elite dryer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM W10120998 Dryer Lint Screen Filter The Genuine OEM Whirlpool W10120998 is the lint screen filter for select Whirlpool-built dryers, including Kenmore, Maytag, Amana, Roper and other brands. The lint screen traps lint and debris from the exhaust air flowing out of the dryer to help prevent clogging and support performance. Replace it if it is damaged or missing. This is the original Whirlpool part, not an aftermarket equivalent. Lint screens differ between dryers, so check your model number before ordering. Clean and inspect the screen regularly. Quick Answer The Genuine OEM W10120998 Lint Screen Filter replaces a damaged or missing lint screen on a compatible Whirlpool-built dryer. Replaces W10120998, W10049370 and 8066170. Classic symptoms: long drying times, lint on clothes, or poor drying. Other problems can cause the same symptoms. Common Problems This Part Fixes Long drying times Lint on clothing Poor drying Damaged or missing lint screen Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This lint screen replaces or supersedes the following part numbers: W10120998, 1206293, 3390721, 8066170, 8572268, W10049370, W10120998VP, W10178353, W10596627, AP3967919, AWP40367, AH1491676, EA1491676, EAP1491676, PD00002655, PS1491676 Whirlpool uses many similar lint screen numbers for different dryers, and they are not interchangeable by number alone. If your old lint screen shows a different number, contact our support team and we'll check whether it matches. Compatibility This lint screen is listed for Kenmore, Whirlpool, Maytag, Amana, Roper, KitchenAid, Crosley, Inglis and other Whirlpool-built dryers, including these examples: Kenmore 11087994500, 11087983830, 11097195800, 11087994300 Whirlpool WED7500GW0, WGD7500GW0, WED6120HW0, 3LWGD4800YQ0 Maytag MGDB765FC0, MGDB850YG2, MGDB725BW0 Note: The models above are a small sample, not a full list. It fits only some models of each brand. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Genuine OEM Whirlpool part, not an aftermarket equivalent Traps lint and debris from the dryer's exhaust air Slides into place in the lint compartment, with no tools required Replaces several earlier Whirlpool lint screen numbers Product Specifications Part Number W10120998 OEM Part Number W10120998 Part Type Dryer Lint Screen Filter Condition Genuine OEM Manufacturer Whirlpool Quantity 1 Lint Screen Application Select Whirlpool-Built Dryers Installation Notes ⚠️ Make Sure The Dryer Is Off And Cool Make sure the dryer is off and has cooled before you begin. Remove the old lint screen, clear any lint from the lint compartment, and slide the new screen into place. Follow your dryer's owner's manual for model-specific details. Clean and inspect the screen regularly, and avoid harsh chemicals or rough materials when cleaning. Frequently Asked Questions What does the lint screen do? It traps lint and debris from the exhaust air flowing out of the dryer, which helps prevent clogging. Replace it if it is damaged or missing. Is this an OEM or aftermarket part? This is a genuine OEM part from Whirlpool, not an aftermarket equivalent. Can I use a lint screen with a similar part number? Not by number alone. Whirlpool uses different lint screens for different dryers, so match the part number and your model number, or contact our support team and we'll check for you. Will this fit my dryer? It is listed for many Whirlpool-built dryers, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10120998 Dryer Lint Screen Filter The XPARTCO W10120998 is an aftermarket replacement lint screen filter for select Whirlpool-built dryers, including Kenmore, Maytag, Amana, Roper and other brands, replacing Whirlpool part W10120998. The lint screen traps lint and debris from the exhaust air flowing out of the dryer to help prevent clogging and support performance. Replace it if it is damaged or missing. Lint screens differ between dryers, so check your model number before ordering. Clean and inspect the screen regularly. Quick Answer The XPARTCO W10120998 Lint Screen Filter replaces a damaged or missing lint screen on a compatible Whirlpool-built dryer. Replaces W10120998, W10049370 and 8066170. Classic symptoms: long drying times, lint on clothes, or poor drying. Other problems can cause the same symptoms. Common Problems This Part Fixes Long drying times Lint on clothing Poor drying Damaged or missing lint screen Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This lint screen directly replaces the following part numbers: W10120998, 1206293, 3390721, 8066170, 8572268, W10049370, W10120998VP, W10178353, W10596627, AP3967919, AWP40367, AH1491676, EA1491676, EAP1491676, PD00002655, PS1491676 Whirlpool uses many similar lint screen numbers for different dryers, and they are not interchangeable by number alone. If your old lint screen shows a different number, contact our support team and we'll check whether it matches. Compatibility This lint screen is listed for Kenmore, Whirlpool, Maytag, Amana, Roper, KitchenAid, Crosley, Inglis and other Whirlpool-built dryers, including these examples: Kenmore 11087994500, 11087983830, 11097195800, 11087994300 Whirlpool WED7500GW0, WGD7500GW0, WED6120HW0, 3LWGD4800YQ0 Maytag MGDB765FC0, MGDB850YG2, MGDB725BW0 Note: The models above are a small sample, not a full list. It fits only some models of each brand. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering. Key Features Aftermarket replacement for the Whirlpool W10120998 lint screen Traps lint and debris from the dryer's exhaust air Slides into place in the lint compartment, with no tools required Replaces several earlier Whirlpool lint screen numbers Product Specifications Part Number XPW10120998 OEM Part Number W10120998 Part Type Dryer Lint Screen Filter Condition Aftermarket Replacement Quantity 1 Lint Screen Application Select Whirlpool-Built Dryers Installation Notes ⚠️ Make Sure The Dryer Is Off And Cool Make sure the dryer is off and has cooled before you begin. Remove the old lint screen, clear any lint from the lint compartment, and slide the new screen into place. Follow your dryer's owner's manual for model-specific details. Clean and inspect the screen regularly, and avoid harsh chemicals or rough materials when cleaning. Frequently Asked Questions What does the lint screen do? It traps lint and debris from the exhaust air flowing out of the dryer, which helps prevent clogging. Replace it if it is damaged or missing. Is this an OEM or aftermarket part? This is an aftermarket replacement from XPARTCO, made to replace Whirlpool part W10120998. If you specifically need a genuine Whirlpool part, contact our support team. Can I use a lint screen with a similar part number? Not by number alone. Whirlpool uses different lint screens for different dryers, so match the part number and your model number, or contact our support team and we'll check for you. Will this fit my dryer? It is listed for many Whirlpool-built dryers, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less