Genuine Frigidaire OEM
Frigidaire 5304533220 Washer Water Fill Hose Assembly
Genuine OEM internal valve-to-tub fill hose for select Frigidaire-built laundry centers and washer/dryer combination units.
Product Overview
The Frigidaire 5304533220 Washer Water Fill Hose Assembly is a Genuine OEM internal fill hose used to route incoming water from the washer water inlet valve to the wash tub on compatible laundry-center models.
This is the valve-to-tub hose inside the appliance. It is not the external hot/cold household water-supply hose that connects the appliance to the wall faucets.
Quick Answer
5304533220 is the Genuine Frigidaire OEM valve-to-tub washer fill hose. It replaces earlier Frigidaire numbers 5304508358 and 809191901 and is used on select Frigidaire, Kenmore, Crosley, and other Electrolux-manufactured laundry centers.
Common Problems This Part May Fix
Water leaking inside the washer cabinet during fill
Cracked, split, hardened, or deteriorated fill hose
Leak between the inlet-valve outlet and wash tub
Loose or damaged internal water-fill connection
Water dripping from the valve-to-tub hose during operation
Replaces and Cross-References
5304533220, 5304508358, 809191901, AFR20016, AP7194866, EAP11775692, PD00076846, PS16745853
Cross-reference numbers are provided for identification. Always verify the full appliance model number before ordering.
Compatibility
Confirmed applications include select Frigidaire-built laundry centers and washer/dryer combinations such as:
FLCE7523AW0
FLCE7523AW1
FLCE7522AW1
FLCE7522AW4
FFLE3900UW0
FFLE3900UW1
FFLG3900UW0
FFLE3911QW1
CFLE3900UW0
41761712511
41761732810
41771732810
Important: This is only a partial compatibility list. Confirm the complete model number from the appliance rating label before purchase.
Key Features
Genuine Frigidaire OEM replacement part
Internal valve-to-tub fill hose
Routes fill water from the inlet valve to the washer tub
Direct replacement for 5304508358 and 809191901
Factory-style fit for compatible laundry centers
Used on select Frigidaire, Kenmore, and related Electrolux-built models
Product Specifications
Manufacturer Part Number
5304533220
Brand
Frigidaire
Part Type
Washer Internal Water Fill Hose
Hose Location
Water Inlet Valve to Wash Tub
OEM Status
Genuine OEM
Appliance Type
Laundry Center / Washer-Dryer Combo
Condition
New
External Supply Hose?
No — this is an internal appliance hose
Installation Notes
Disconnect electrical power to the appliance before service.
Shut off both household water-supply valves.
Access the washer inlet-valve and tub-fill connection according to the model-specific service procedure.
Place towels or a shallow pan below the hose connections to catch residual water.
Release the clamps and remove the old hose without damaging the valve outlet or tub fitting.
Install the new hose fully onto both fittings and reinstall the clamps in their original positions.
Restore water and inspect carefully for leaks before returning the appliance to service.
Diagnostic tip: If water is leaking during fill, inspect the hose, clamps, inlet valve, and tub connection before replacing parts. A leak from the external household supply hose requires a different part.
Frequently Asked Questions
Is 5304533220 a Genuine OEM part?
Yes. It is a Genuine Frigidaire OEM fill hose.
Does 5304533220 replace 5304508358?
Yes. 5304533220 supersedes 5304508358 and 809191901.
Is this the hose that connects the washer to the wall faucet?
No. This is an internal valve-to-tub fill hose located inside the laundry center.
Can this part correct a washer leak?
Yes, if the leak is caused by a cracked or damaged valve-to-tub fill hose or its connection. Inspect all nearby fittings and clamps before ordering.
Shop With Confidence
Verify your complete laundry-center model number before ordering. This listing is for the Genuine Frigidaire OEM internal valve-to-tub fill hose.
Genuine Frigidaire OEMValve-to-Tub Fill HoseCompatibility SupportFast U.S. Shipping
Genuine Whirlpool 8212546RP Washer Fill Hoses 2-Pack 4 Feet - Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Kenmore
Product Description
Ensure reliable water supply for your washer with the Genuine Whirlpool 8212546RP Washer Fill Hoses 2-Pack. These OEM 4-foot black rubber hoses are designed for Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore washing machines, delivering hot and cold water with anti-corrosive brass couplings and pre-installed high-quality EPDM washers. With a 1050 PSI burst strength, they prevent leaks and ensure consistent water flow, addressing issues like leaking, low water flow, or hose failure.
Note: Includes two 4-foot hoses with built-in O-rings. Disconnect power and water supply before installation. Replace hoses every 5 years to reduce the risk of failure.
Replaces part numbers: 8212546RP, AP3885155, 1178876, 49535, 8212546IP, 8212546RW, PS1156134.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WFW72HEDW0, WFW75HEFW0, WFW90HEFC0, WTW5000DW0
Maytag: MHW3500FW0, MHW5500FC0, MVWC565FW0, MVWB835DW0
KitchenAid: KSMW1030SS0
Jenn-Air, Amana, Kenmore: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore washing machines.
💧 Specifications: OEM 4-foot black rubber hoses with brass couplings, 1050 PSI burst strength, and EPDM washers.
💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability and leak-free operation.
🛠️ Easy Installation: Requires pliers and work gloves; typically installed in 10–15 minutes.
🛡️ Effective Fixes: Resolves leaking, low water flow, or hose failure issues.
Product Specification
Part Number: Genuine Whirlpool 8212546RP
Component Type: Washer fill hoses (2-pack)
Material: Black rubber with brass couplings, EPDM washers
Dimensions: 4 ft. length.
Mounting: 3/4" male and female connections with built-in O-rings
Operating Conditions: Suitable for hot and cold water in household washing machine environments
Compliance: Exceeds IAPMO, CSA, ANSI, IEC 61770, and RMA standards; Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source and turn off hot and cold water supplies before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer running efficiently today!
Add to cart now for a reliable fix!
EXPW79SC (8 Pack) Washing Machine Fill Hose Gasket with Screen
8 Pack
compatible with 5/ 8 inch washing machine and 3/4 inch garden hose
Fine Screen
the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively
EXPW79SC (4 Pack) Washing Machine Fill Hose Gasket with Screen
4 Pack
compatible with 5/ 8 inch washing machine and 3/4 inch garden hose
Fine Screen
the rubber washer with stainless steel filter mesh, serves as a flow restrictor can reduce the waste of water effectively
AAS73229402 Genuine OEM LG Washer Tub to Pump Hose
The AAS73229402 is a Genuine OEM LG replacement tub-to-pump hose (also called a drain pump bellows assembly) compatible with a wide range of LG and Kenmore washing machines. This hose carries water from the outer tub to the drain pump, allowing the used wash and rinse water to properly empty from the tub during the drain cycle. It features flexible bellows that let the hose expand and contract as the tub moves during operation, while forming a watertight connection between the tub and the pump. When this hose cracks, splits, or develops porous areas, water leaks out during draining — typically showing up as a puddle under the washer.
Made of durable rubber engineered to resist wear through years of flexing and water exposure. As a Genuine OEM part manufactured by LG to factory specifications, the AAS73229402 directly replaces AP6973533, AGM76891101, AHA75673401, and AEM74073303. This is one of those repairs where using the exact OEM hose matters — the correct fit and internal diameter ensure proper drainage and a leak-free seal, which unverified substitute hoses can't always guarantee. Installs in 30–60 minutes with basic hand tools.
Quick Answer
The AAS73229402 Genuine OEM LG Washer Tub to Pump Hose fixes LG and Kenmore washers that leak water under the machine during or after draining, don't fully drain the tub, leave standing water, or develop mold in the pump housing. Tub-to-pump hose / drain pump bellows assembly with flexible bellows — carries water from the outer tub to the drain pump. Genuine OEM. Replaces AP6973533, AGM76891101, AHA75673401, AEM74073303. Compatible with LG front-load and top-load washers plus select Kenmore models. Use the exact OEM hose for correct fit and diameter.
Common Problems This Part Fixes
Water leaking or puddling under the washer during or after the drain cycle
Washer not fully draining — water left in the tub after the cycle
Excess water left in the tub requiring additional emptying
Drips or leaks from the tub-to-pump connection
Standing water or mold growth inside the pump housing
Hose visibly cracked, split, or showing porous/worn areas
Hose no longer staying securely attached to the tub or pump
Musty/moldy smell from water trapped by a leaking or sagging hose
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This tub-to-pump hose directly replaces the following OEM and cross-reference part numbers:
AAS73229402, AAS73229405, AAS73229403, AGM76891101, AP6973533, PS12738715, ALG52189, PD00071151.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility. For a proper leak-free seal, use the exact OEM hose rather than an unverified substitute — the correct fit and internal diameter matter.
Compatibility
This tub-to-pump hose is compatible with select LG and Kenmore washing machines, including front-load and top-load models:
LG front-load washers — select WM-series models
LG top-load washers — select WT-series models (including WT7305CV and related)
LG washers using the AAS73229402 tub-to-pump bellows hose (verify with your parts diagram)
Kenmore / Sears washers — select LG-built models
Because LG uses several different tub-to-pump and drain hoses across its washer lineup, always verify your appliance model number before ordering to confirm the AAS73229402 is the correct hose for your machine. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by LG to factory specifications — guaranteed fit and performance
Tub-to-pump hose (drain pump bellows assembly) — carries water from the outer tub to the drain pump for proper draining
Flexible bellows design — expands and contracts as the tub moves during operation while keeping a watertight seal
Resolves "leaking under the washer," "won't fully drain," "standing water," and "mold in pump housing" symptoms when caused by a failed hose
Durable rubber construction engineered to resist cracking, splitting, and porosity over years of use
Correct OEM fit and internal diameter for proper drainage and a leak-free seal
Replaces AP6973533, AGM76891101, AHA75673401, and AEM74073303
Compatible with LG front-load (WM-series) and top-load (WT-series) washers, plus select Kenmore LG-built models
Genuine OEM — the exact part sourced from the manufacturer
DIY repair — installs in 30–60 minutes with basic hand tools
Product Specifications
Part Number
AAS73229402
Part Type
Washer Tub-to-Pump Hose (Drain Pump Bellows Assembly)
Condition
Genuine OEM
Application
Front-Load & Top-Load Washing Machines (LG platform)
Function
Carries water from the outer tub to the drain pump
Design
Flexible bellows (expands/contracts with tub movement)
Material
Rubber
Location
Between the outer tub and the drain pump
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Work Gloves — Drain the Tub First Unplug the washer and shut off the water supply before beginning. Wear work gloves to protect your hands. Drain any excess water from the washer before starting — the tub and hose still hold water that will spill out when you disconnect the hose, so have towels and a shallow pan ready. Pull the washer away from the wall to access the panels (on many models you can leave the water supply hoses connected and just unplug the electrical cord). The hose is accessed by removing the rear panel: remove the screws (often 4) securing the rear panel to the back of the washer and set the panel aside. On some front-load models, the top panel is removed instead — remove the top panel bracket screws, slide the top toward the rear, and lift it off. Locate the tub-to-pump hose connecting the outer tub to the drain pump. Photograph the hose routing and clamp positions before disconnecting. Use slip-joint pliers to squeeze and slide back the spring hose clamps at each end of the hose (and loosen any center clamp with a screwdriver). Pull the old hose straight off both connections. Note: on some models the clamp on the pump differs from other nearby hose clamps — mark them so you reinstall each in the right spot. Install the new AAS73229402 hose, seating it fully onto both the tub and pump fittings, and secure the clamps in their original positions using the existing clamps. Make sure the hose is seated all the way on and the clamps are secure — a hose that isn't fully seated will leak and make a large mess. Reinstall the panel, push the washer back into place, restore power and water, and run a rinse/spin cycle to test drainage and check for leaks. Tip: some people find it easier to tip the washer up a few inches on a couple of 2x4s for better access. Tools needed: Phillips screwdriver, slip-joint pliers, towels, shallow pan, work gloves.
Frequently Asked Questions
There's a puddle under my LG washer — is this hose the cause?
It's one of the most common causes, yes. The tub-to-pump hose carries water under pressure from the tub to the drain pump, so when it cracks, splits, or develops a porous spot, water escapes during the drain cycle and puddles under the machine. Before ordering, inspect the hose and its connections: pull the washer out, remove the rear (or top) panel, and look for visible cracks, splits, or wet spots along the hose and at the clamps. Also check the drain pump itself and the other hoses, since a leak can come from several nearby points. If the tub-to-pump hose shows damage or the leak traces to it, this is the correct part. Many people replace the drain pump and hoses together as a "while you're in there" repair.
What's the difference between the tub-to-pump hose and the drain hose?
They're two different hoses. The tub-to-pump hose (this part, AAS73229402) is an internal hose that carries water from the outer tub to the drain pump inside the washer cabinet. The drain hose is the external hose that carries the water from the pump out of the washer to your standpipe, sink, or drain. If your leak is inside the cabinet or under the machine, it's often the internal tub-to-pump hose. If water is leaking where the external hose meets your drain, that's the drain hose. Make sure you're ordering the right one for your symptom.
Can I use an aftermarket substitute hose instead?
We recommend the exact OEM hose. Tub-to-pump hoses have to match the specific fit and internal diameter of your washer's tub and pump fittings to seal properly and drain correctly. Appliance technicians specifically caution against using unverified substitute hoses on LG washers because an incorrect fit or diameter can cause leaks or drainage problems. The AAS73229402 is the genuine OEM part with the correct dimensions for the models it fits, giving you a reliable, leak-free seal. If you're unsure whether this is the right hose for your model, send us your model number and we'll confirm.
My washer won't drain fully and leaves standing water — is it this hose?
It can be, though incomplete draining has a few possible causes. A tub-to-pump hose that has partially collapsed, kinked, or is leaking can reduce the water flow to the pump and leave water behind. But standing water is also commonly caused by a clogged pump, a blocked hose, or a failing drain pump. Inspect the tub-to-pump hose for kinks, sagging, cracks, and blockages first. Also check the drain pump inlet and clean out any debris. If the hose is damaged, replacing it with the AAS73229402 restores proper flow. If the hose is fine, the drain pump or a blockage is the more likely cause.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by LG to factory specifications. It is the exact same tub-to-pump hose (drain pump bellows assembly) installed in compatible LG and Kenmore LG-built washers from the factory — guaranteed fit, materials, and performance, sourced directly from the manufacturer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
5215ER2002G Washer Genuine OEM Drain Hose Assembly
Product Overview
The 5215ER2002G Washer Genuine OEM Drain Hose Assembly is designed to carry wastewater from the washer tub to the household drain. This OEM drain hose ensures proper water flow and prevents leaks, helping your washer drain efficiently and reliably. Flexible drain hose assembly that carries wastewater from your washer to the household drain. Replace if cracked, leaking, or damaged during installation.
Quick Answer
If your washer is not draining, leaking from the back, or showing drain errors, the 5215ER2002G drain hose may be clogged, cracked, or damaged. Replacing it restores proper drainage and prevents leaks.
Replaces Part Numbers
Replaces OEM part number: 5215ER2002G, AEM73773301, 5215ER2002Q, 1268108, 4932ER3008A, 5215ER2002B, 5215ER2002C, 5215ER2002D, 5215ER2002E, 5215ER2002F, 5215ER2002N, 5215ER2002R, 5215ER2002S, 5215ER2002Y, AEM75033801, AGM75511501, ALG51596, PD00005676, 095225452741, AH3527325, EA3527325, AP4457291, PS3527325.
Compatibility
This drain hose assembly is compatible with select LG and compatible front-load washers.
LG Front-Load Washers
Kenmore (LG-built) Washers
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Washer not draining
Water leaking from hose or rear panel
Drain errors or slow drainage
Cracked, kinked, or clogged hose
Key Features
Genuine OEM drain hose assembly
Ensures proper wastewater flow
Leak-resistant construction
Exact-fit replacement for compatible models
Product Specifications
Part Number: 5215ER2002G
Part Type: Washer Drain Hose Assembly
Brand: LG
Condition: New
OEM / Aftermarket: Genuine OEM
Application: Front-Load Washers
Troubleshooting Guide
Water won’t drain → Possible blockage or damaged hose
Leak at back of washer → Cracked or loose drain hose
Slow draining → Kinked or partially clogged hose
When Should You Replace This Hose?
Replace this hose if you notice leaks, visible damage, or if your washer is not draining properly.
Installation Notes
⚠️ Disconnect power and water supply before installation. Remove clamps, detach the old hose, and install the new hose securely to prevent leaks.
Related Parts
Washer Drain Pump
Drain Pump Filter
Water Inlet Valve
Frequently Asked Questions
Will this hose fit my washer?This hose fits select LG and compatible washers. Always verify your model number.
What does a drain hose do?It carries wastewater from the washer to the household drain.
What are signs of a bad hose?Leaks, cracks, kinks, or drainage issues indicate replacement is needed.
Is this OEM?Yes, this is a genuine OEM drain hose assembly.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Genuine OEM Parts Compatibility Support
DC97-18682D Washer Genuine Drain Hose Assembly – Compatible with Samsung Washers
Product Description
Maintain proper water drainage with the DC97-18682D Washer Genuine Drain Hose Assembly. This OEM replacement hose is designed to channel used water safely from your washer to the household drain system. A damaged or clogged drain hose can cause leaks, standing water, or drainage errors. Replacing it with this genuine part restores dependable washer performance and prevents messy water issues.
Replaces Part Numbers
DC97-18682D, DC97-18682B, DC97-18682C, DC97-18682E, PD00070138, EAP16556783, AP7018854, PS16556783.
Compatibility
This genuine drain hose assembly is compatible with select Samsung front-load washers.
Example compatible models include (but are not limited to): Samsung WF42H5000AW, WF45K6500AW, WF56H9100AW.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM Replacement – Designed specifically for Samsung washers
💧 Reliable Drainage – Ensures proper water flow and prevents backup or leaks
💰 Cost-Effective Solution – Avoids costly water damage and washer breakdowns
🛠️ Easy Installation – Flexible design for quick fit with standard tools
🛡️ Fixes Common Issues – Resolves leaks, clogs, or drain-related error codes
📐 Product Specification
Part Number: DC97-18682D
Component Type: Washer Drain Hose Assembly
Material: Heavy-duty rubber and reinforced plastic fittings
Mounting: Direct fit replacement with factory connections
Operating Conditions: Standard residential washer use
Compliance: Genuine Samsung OEM part
🛠️ Installation Notes
Tools Needed: Pliers, screwdriver (if clamps are included)
⚠️ Safety First: Always disconnect power and water supply before beginning any washer repair.
Steps:
Turn off water supply and unplug washer.
Locate drain hose at the back of the washer.
Remove hose clamps securing the old drain hose.
Detach old hose from washer and household drain.
Connect new DC97-18682D drain hose to washer outlet.
Secure with clamps and ensure a snug fit into the drain standpipe.
Restore water, reconnect power, and test for leaks.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Prevent leaks and drainage problems — Add to Cart Now for a reliable, factory-approved repair!
WH41X22935 Washer Tub to Pump Hose
Washer Tub to Pump Hose
Replaces Part Number: WH41X22935, WH41X10163, 123C7981, 4258948, J27-763, WH41X0371, WH41X371, AP5983873, PS11721808.
Description: This Washer Tub to Pump Hose is a replacement part for select GE, Hotpoint Top-Load Washer models.
This is an aftermarket part that can be used as a replacement for the OEM part.
W11281268 Genuine OEM Whirlpool Washer Drain Hose
The W11281268 is a genuine Whirlpool OEM external drain hose for Whirlpool, Maytag, and Amana washers. This hose carries wastewater from the washer to your house drain during the drain phase of every cycle, connecting to the washer's outlet spout on one end and to your standpipe or utility sink on the other.
This 6' black flexible hose features an elbow bracket and a grey 90-degree coupler end with a 1" inner diameter, and includes a metal clamp. The manufacturer has updated the design of the rubber fitting that attaches to the back of the washer since earlier versions of this hose were produced — the new fitting looks slightly different but fits and functions the same way as the original. Over time, drain hoses can crack, split, or become brittle with age, or may simply be missing if replaced or damaged during a move. A failing or missing hose typically shows up as water leaking or pooling near the back of the washer during the drain cycle, or no hose present at all on a newly acquired unit. It directly replaces WPW10267638, W10267638, W11250143, W11044871, W11198580, W11234073, and W11050506.
Quick Answer
The W11281268 Genuine OEM Whirlpool Washer Drain Hose fixes Whirlpool, Maytag, and Amana washers with a cracked, split, or missing drain hose, or water leaking near the back of the washer during the drain cycle. 6' black flexible hose, elbow bracket, 1" ID grey 90-degree coupler, metal clamp included. Replaces WPW10267638, W10267638, W11250143, W11044871, W11198580, W11234073, W11050506. You'll need to transfer your existing hose clamps onto the new hose during installation.
Common Problems This Part Fixes
Cracked, split, or leaking drain hose
Water pooling or leaking near the back of the washer during the drain cycle
Missing drain hose on a newly acquired or moved washer
Drain hose that's too short to reach the standpipe or utility sink
Brittle or deteriorated hose material from age
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer drain hose directly replaces the following OEM and cross-reference part numbers:
W11281268, W11250143, W10267638, W11198580, WPW10267638, 4814006, W11044871, W11050506, W11234073, AP6784154, AWP44196, EAP12584563, FIX12584563, PD00044515, PS12584563.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This drain hose is compatible with select Whirlpool washers, and also fits select Maytag and Amana washers built on the Whirlpool platform.
Note: Whirlpool also sells a separate drain hose, W11244231, used on other Whirlpool and Maytag washer series (1CWTW4, 2DWTW, 3DWTW, 4GNTW4, 4KNTW, and related Kenmore 110.2 numbers) — this is a different part with its own cross-reference set. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which hose your washer needs.
Key Features
Genuine Whirlpool OEM part — factory-specified length, coupler, and fitting design
Carries wastewater from the washer to your house drain during the drain cycle
Resolves "cracked or leaking hose," "missing drain hose," and "hose too short" symptoms
6' black flexible hose with elbow bracket
Grey 90-degree coupler end, 1" inner diameter
Includes metal clamp
Direct drop-in replacement — matches the original fitting and length
Replaces WPW10267638, W10267638, W11250143, W11044871, W11198580, W11234073, and W11050506
Compatible with Whirlpool, Maytag, and Amana washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
W11281268
Part Type
Washer External Drain Hose
Condition
Genuine OEM
Brand
Whirlpool
Length
6'
Color
Black
Material
Rubber, flexible
Coupler End
Grey, 90-degree, 1" inner diameter
Includes
Elbow bracket, metal clamp
Repair Difficulty
Easy — basic hand tools, novice repair experience
Quantity
1 drain hose
Compatible Brands
Whirlpool, Maytag, Amana
Installation Notes
⚠️ Unplug Washer Before Starting — Transfer Your Old Clamps To The New Hose Unplug the washer, or shut off the house circuit breaker for the appliance, before beginning. Wear work gloves. Remove the back panel of the washer, then the lower front access panel to access the drain hose connection. Place a towel down before disconnecting any hoses to catch any remaining water. Squeeze the clamp ring with pliers and remove the old hose from the outlet spout on the back of the washer, and disconnect the other end from your standpipe or drain connection. You'll need to transfer your existing hose clamps onto the new W11281268, since a new one isn't included. Fit the new hose over the outlet spout and squeeze the clamp back into place with pliers, then reconnect the other end to your house drain. Reinstall the lower front access panel and back panel. Restore power and run a test cycle to confirm the hose is secure with no leaks. Tools needed: pliers, work gloves, towel.
Frequently Asked Questions
Is this repair difficult?
No, it's a very straightforward repair. Several customers describe it as simple as squeezing the clamp ring with pliers, fitting the new hose over the outlet spout, and moving the clamp back into place — no special tools or advanced skills required.
The rubber fitting looks different from my old hose. Did I get the wrong part?
No, this is expected. The manufacturer has updated the design of the rubber fitting that attaches to the back of the washer since earlier versions of this hose were made. The new fitting will fit and function exactly the same as the original, even though it may look slightly different.
Does this come with new hose clamps?
This hose includes its own metal clamp for the coupler end, but you'll still need to transfer your existing clamps from the old hose for the connections that don't come with a new one included. Keep your old clamps on hand during the swap rather than discarding them with the old hose.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original length, coupler design, and fitting configuration of the drain hose originally installed on your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
