Search results for "Spark Modules"

Choice W10898291 Range Spark Module (Board) Direct spark ignition module. Fits specific Maytag, Kenmore, Whirlpool gas range models Replaces Part Numbers: W10898291, W10818365, AP6034131, PS11765825. Description: This Spark Module is a replacement part for specific Maytag, Kenmore, Whirlpool gas range models. Located underneath each sealed burner bowl, it generates the high voltage spark needed for reliable ignition of surface flames. Key Features: ✅ Replaces: W10898291, W10818365, AP6034131, PS11765825. ✅ Fits brands: Whirlpool, Maytag, Kenmore, Amana & more ✅ Ensures lid locks properly during operation ✅ Direct-fit, plug-and-play installation ⚠️ Always disconnect power before installation. Contact us to confirm fit for your washer model. 📦 Part Number: W10898291CM💯 30-Day Money Back Guarantee This is an aftermarket part that can be used as a replacement for the OEM part.  

Read more less

RI1V120 Cooktop Re-ignition Spark Module  Re-ignition Module 1 Points Reignition Module 120 Volt Replaces Part Numbers: Whirlpool / KitchenAid W11319687, W11121317, AP6872103, PS12711722.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

9758079 Gas Range Oven Spark Electrode Igniter - Compatible with Whirlpool, Kenmore, Maytag Ranges Product Description Restore your gas range’s baking performance with the Aftermarket 9758079 Gas Range Oven Spark Electrode Igniter from Parts-O-Matic. This high-quality aftermarket igniter replaces the original 9758079, designed for select Whirlpool, Kenmore, Maytag, Amana, and other range ovens with Direct Spark Ignition (DSI) systems. Featuring a durable ceramic and metal construction with a .110" male terminal end, it provides reliable sparking to ignite the oven burner. It’s a cost-effective fix for ovens that won’t start, fail to ignite, or produce little to no heat. Handle with care to avoid damaging the ceramic insulator. Enjoy fast and free shipping on all orders at Parts-O-Matic! Compatibility: Compatible with models including but not limited to: Whirlpool: WFG524SLAB0, SF1/2/3, TGP, VSF, WFG, YSF series Kenmore: 66475272502, 6657213301, 66575162301 Maytag, Amana, Jenn-Air, Roper, Estate, Inglis models Replaces part numbers: WP9758079, 9758079, WP9758079VP, AP6013984, PS11747217 Verify your model number or contact Parts-O-Matic support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Amana, Jenn-Air, Roper, Estate, and Inglis gas range models. 🔥 Specifications: Spark electrode igniter with mounting bracket, .110" male terminal end, designed for DSI systems to ignite the oven burner efficiently. 💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires a Phillips screwdriver and basic tools; typically installed in 10–20 minutes. 🛡️ Reliable Fixes: Resolves common issues like no ignition, no heat, or gas smell without ignition. Installation Notes: Tools Needed: Phillips screwdriver, small socket set or nut driver, needle-nose pliers. Safety First: Disconnect power and shut off the gas valve before installation. Handle with Care: Avoid damaging the ceramic insulator, as it may crack and affect performance. Installation Steps: Remove oven racks and base plate (2 screws), unscrew the burner (1 screw), disconnect the old igniter’s wire, and remove the igniter (2 screws). Install the new igniter in reverse order. Note: Some users report slight bracket misalignment; minor bending may be required. Shop Parts-O-Matic for high-quality aftermarket appliance parts with fast and free shipping on all orders and a 30-day return policy. Get your gas range back to perfect performance today! Add to cart now for a budget-friendly fix with fast and free shipping on your entire order!

Read more less

ERP 316011200 Range Top Burner Spark Igniter Electrode The 316011200 is an aftermarket replacement gas range surface burner spark igniter electrode compatible with select Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, and Danby gas ranges and cooktops. The spark igniter electrode is the ceramic-and-metal tip mounted next to each surface burner that generates the electrical spark needed to ignite the gas when a burner knob is turned. When the electrode cracks, corrodes, or its internal wiring degrades, it will produce a weak or absent spark — causing the burner to not light, to require a long hold of the ignition button, or to click repeatedly without igniting. Made from porcelain and metal, each electrode measures 3/4"L x 1/2"W x 1-3/8"H and is sold individually. One electrode is used per surface burner — most gas ranges have 4 or 6 surface burners, each with its own electrode. It directly replaces AP2123862, 5303311262, 464, AH436633, EA436633, EAP436633, PS436633, LP11343, and PD00000522. Installs in 15–30 minutes depending on model disassembly required. Note: While this part is involved in a gas appliance, the electrode itself is not a gas component — it carries only a low-voltage electrical signal from the ignition module. Always unplug the range and shut off the gas before beginning any repair. Quick Answer The 316011200 Range Top Burner Spark Igniter Electrode fixes Frigidaire-platform gas ranges where a surface burner won't light, requires a long hold to ignite, sparks continuously without lighting, or produces a weak clicking sound. Porcelain/metal, 3/4"L x 1/2"W x 1-3/8"H. Sold individually — one per burner. Compatible with Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, and Danby gas ranges. Replaces AP2123862, 5303311262, 464, EA436633, PS436633, LP11343. Common Problems This Part Fixes Surface burner will not light — electrode not producing a spark Burner requires holding the ignition knob for an extended time before the gas lights Burner sparks repeatedly (rapid clicking) without ever lighting the gas One burner does not spark while all others work normally — that burner's electrode has failed Weak or intermittent spark at a specific burner Electrode visibly cracked, chipped, or tip broken off Corrosion or moisture damage to the electrode tip or wiring from a cooking spill Replaces Part Numbers This spark igniter electrode directly replaces the following OEM and cross-reference part numbers: 316011200, 5303311262, AFR16248, AH436633, AP2123862, EA436633, EAP436633, LP11343, PD00000522, PS436633. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This spark igniter electrode is compatible with select gas ranges and cooktops from the following brands: Frigidaire gas ranges and cooktops Tappan gas ranges and cooktops Electrolux gas ranges (select models) Gibson gas ranges Kelvinator gas ranges White-Westinghouse gas ranges Kenmore / Sears gas ranges (Frigidaire/Electrolux-built models) Danby gas ranges (select models) Note: This electrode is sold individually — one electrode per burner. Most gas ranges have 4 or 6 surface burners, each with its own electrode. If multiple burners are not lighting, you may need to order multiple electrodes. Always verify your model number before ordering to confirm this electrode fits the specific burner assembly on your range. Key Features Generates the electrical spark that ignites the gas at each surface burner when the ignition knob is turned Porcelain insulator body with metal electrode tip — designed to withstand continuous thermal cycling near the burner flame Dimensions: 3/4"L x 1/2"W x 1-3/8"H — matches original electrode dimensions for compatible Frigidaire-platform models Sold individually — one electrode per surface burner; order one per failed burner Replaces AP2123862, 5303311262, 464, EA436633, PS436633, LP11343, and EAP436633 Compatible with Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, and Danby gas ranges Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 15–30 minutes with basic hand tools Product Specifications Part Number 316011200 Part Type Gas Range Surface Burner Spark Igniter Electrode Condition Aftermarket Replacement Application Gas Ranges and Cooktops Material Porcelain / Metal Color White / Gray Dimensions 3/4"L x 1/2"W x 1-3/8"H Sold As Single electrode (one per burner) Compatible Brands Frigidaire, Tappan, Electrolux, Gibson, Kelvinator, White-Westinghouse, Kenmore, Danby Installation Notes ⚠️ Gas Appliance Safety — Unplug and Shut Off Gas Before Starting This part is installed on a gas range. Always unplug the range from the power outlet and shut off the gas supply at the shutoff valve before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. Do not restore gas or power until the repair is complete and you have confirmed there are no gas connections disturbed during the repair. ⚠️ Range Top Access May Require Lifting the Cooktop On most Frigidaire-platform gas ranges, the spark igniter electrodes are mounted beneath the cooktop surface and accessed by lifting the top panel — this requires removing all grates and burner caps, then lifting the top from the front. The electrode is secured by a single screw and connected to the ignition module by an insulated wire. Disconnect the wire, unscrew the mounting screw, and remove the old electrode. Install the new 316011200 electrode in the same position, tighten the mounting screw, and reconnect the wire. Important: inspect the insulated wire carefully for damage — if the wire is cracked or bare in any section, it may arc to the stove body and should be repaired with heat-resistant tape or replaced before installing the new electrode. Restore gas and power and test the burner. Tools needed: Phillips screwdriver, possibly a nut driver for some models. Frequently Asked Questions What does the spark igniter electrode do? The spark igniter electrode is the small ceramic-and-metal tip mounted next to each surface burner on a gas range. When you turn a burner knob to the "light" or "ignite" position, the ignition module sends a high-voltage electrical pulse through the wire to the electrode tip. This creates a visible electrical spark that jumps between the electrode tip and the metal burner cap, igniting the gas. The electrode itself carries only a brief electrical pulse — it does not directly handle gas — but it must be in good condition with an intact porcelain body and clean metal tip to produce a reliable, consistent spark. One burner won't light but all the others work — is it the electrode? Almost certainly yes. When all other burners spark normally but one does not, the fault is almost always isolated to that burner's electrode or its connecting wire — not the ignition module (which powers all burners) or the gas supply (which feeds all burners). Inspect the electrode on the non-lighting burner: look for cracks, chips, or a broken tip on the porcelain body. Also check the connecting wire for corrosion at the connection point or damage to the insulation. Replacing the 316011200 electrode on that burner will restore normal ignition in most cases. My burner clicks continuously even when not trying to ignite — what causes this? Continuous clicking when no burner is being lit is typically caused by moisture or food residue on the electrode tip or in the burner cap area creating an unintended electrical path — the ignition module detects a spark condition and keeps firing. Clean the electrode tip, burner cap, and burner head thoroughly with a dry cloth or soft toothbrush, and allow them to dry completely. If cleaning stops the clicking, a cracked or degraded electrode that is allowing moisture to reach the internal wiring is the likely underlying cause — replace the electrode to prevent recurrence. If the clicking persists after the burner area is completely clean and dry, the ignition module may be faulty. How many electrodes does my gas range need? Each surface burner on a gas range has its own dedicated spark igniter electrode — one electrode per burner. A standard 4-burner gas range uses 4 electrodes; a 5- or 6-burner range uses 5 or 6. This listing is for a single electrode. If multiple burners are not lighting, order one electrode for each affected burner. When replacing one electrode, it is a good opportunity to inspect all other electrodes for cracks or corrosion and replace any that show visible wear at the same time. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM part, but is manufactured from porcelain and metal to match the dimensions and performance of the original 316011200 surface burner spark igniter electrode. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

WG446 Microwave Universal Mica Sheet, Waveguide Cover (Pack of 2) – Compatible with Most Microwave Brands Product Description Protect your microwave from sparking, arcing, and grease buildup with the WG446 Microwave Universal Mica Sheet / Waveguide Cover (Pack of 2). These high-quality aftermarket mica sheets shield the waveguide opening from moisture, steam, and food splatter, helping maintain efficient and safe microwave operation. Ideal for replacing damaged, burnt, or contaminated covers, this 2-pack offers excellent value and universal fit. Replaces Part Numbers WG446, Universal Mica Waveguide Cover and equivalent microwave mica sheet replacements Compatibility This universal waveguide cover 2-pack fits a wide range of Samsung, Whirlpool, GE, LG, Panasonic, Sharp, Kenmore, Emerson, and many other microwaves that use cut-to-fit mica sheets. Suitable for models such as (but not limited to):LG LMV1762ST, Samsung ME16H702SES, Whirlpool WMH31017HZ, GE JVM3160RFSS, Panasonic NN-SN686S. Always match the original cover’s dimensions before installation. Contact our support team if you’re unsure. ✅ Key Features 🔄 Universal Aftermarket Replacement – Cut-to-fit design works with most microwave brands 🧱 High-Heat Protection – Prevents debris from entering the waveguide and causing sparks ✂️ Trim-to-Size Sheets – Easy to cut using scissors or a utility knife 💰 2-Pack Value – Keep an extra sheet available for future replacements 🛡️ Fixes Common Issues – Eliminates sparking, burning smell, poor heating, or arcing caused by damaged covers 📐 Product Specification Part Number: WG446 Component Type: Microwave Mica Sheet / Waveguide Cover Material: Heat-resistant mica composite Dimensions: Approx. 5.9"L x 4.7"W (15 cm x 12 cm) (can be trimmed to size) Thickness: standard mica insulation Mounting: Clips or screws depending on microwave model Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Scissors or utility knife, screwdriver (if screws are used) ⚠️ Safety First: Unplug the microwave before installation. Never operate without a waveguide cover. Steps: Disconnect power and remove the old waveguide cover. Use the original cover as a template to trace and cut the new WG446 sheet. Insert the new cover into the mounting clips or secure with screws. Repeat with the second sheet if needed. Restore power and test heating. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Prevent microwave sparking and prolong appliance life — Add to Cart Now for a cost-effective, universal repair solution!

Read more less

WG24 Microwave Universal Mica Sheet, Waveguide Cover (2.5" × 4.2") – Fits Most Microwave Ovens Product Description Restore safe and efficient microwave operation with the WG24 Microwave Universal Mica Sheet / Waveguide Cover. This heat-resistant mica sheet protects the waveguide opening from grease, moisture, and food splatter while allowing microwaves to pass through efficiently. A damaged or burned waveguide cover can cause sparking, arcing, or uneven heating. Replacing it with this durable WG24 mica sheet helps prevent damage to the magnetron and ensures consistent microwave performance. Replaces Part Numbers WG47, Microwave Mica Sheet, Universal Waveguide Cover, Microwave Waveguide Plate Compatibility This universal microwave mica sheet is compatible with most countertop, over-the-range, and built-in microwave ovens from major brands including GE, Whirlpool, Samsung, LG, Panasonic, Kenmore, Frigidaire, and more. ⚠️ Universal fit — may be trimmed to size if required. Always verify dimensions before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Universal Replacement – Fits most microwave waveguide openings 🔥 Heat-Resistant Mica Material – Withstands high temperatures without burning ⚡ Prevents Sparking & Arcing – Protects waveguide and magnetron ✂️ Customizable Fit – Can be trimmed for exact size 💰 Cost-Effective Repair – Extends microwave life at minimal cost 📐 Product Specification Part Number: WG24 Component Type: Microwave Waveguide Cover / Mica Sheet Material: Natural mica Dimensions: 2.5 inches × 4.2 inches Thickness: OEM-equivalent Color: Light brown Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Scissors (if trimming required), Phillips screwdriver ⚠️ Safety First: Unplug the microwave before servicing. Steps: Disconnect microwave from power. Remove the old or damaged waveguide cover. Clean the waveguide opening area. Trim the WG24 mica sheet if necessary. Install the new mica sheet using the original mounting method. Restore power and test microwave operation. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Eliminate sparking and protect your microwave — Add to Cart Now for a simple, effective repair!

Read more less