Search results for "Waveguide"

XPARTCO W10915651 Microwave Waveguide Cover The XPARTCO W10915651 is an aftermarket replacement microwave waveguide cover compatible with select Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, Roper, Admiral, Magic Chef, Norge, Estate, and Ikea over-the-range and built-in microwave/oven combo models. The waveguide cover is a flat mica plate mounted on the interior right wall of the microwave cavity. It protects the waveguide — the channel through which microwave energy is directed into the cooking cavity — from food splatter, grease, and moisture. Without the cover, food particles can reach the waveguide and cause arcing, sparking, burning, and permanent damage to the magnetron or waveguide assembly. Made from mica (a heat-resistant mineral material), this cover measures approximately 5-3/8" L x 1-3/4" W and clips or slides into the mounting slot on the interior wall of the microwave. It directly replaces W10687366, W10120230, WPW10120230, and 461967451001. Replacing a damaged or burned waveguide cover promptly is the single most important step in preventing more expensive microwave damage. Installs in under 5 minutes with no tools. Quick Answer The XPARTCO W10915651 Microwave Waveguide Cover fixes microwaves that are sparking, arcing, burning smells, or have a scorched or missing cover on the interior right wall. Mica plate, approx. 5-3/8" L x 1-3/4" W. — installs in under 5 minutes. Compatible with Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, and more. Replaces W10687366, W10120230, WPW10120230, and 461967451001. Common Problems This Part Fixes Sparking or arcing inside the microwave during operation Burning smell coming from the microwave while in use Visible scorch marks, burn spots, or a hole in the existing waveguide cover Microwave stopping mid-cycle due to arcing or sparking Waveguide cover is cracked, warped, or missing entirely Uneven heating or microwave not heating food properly Microwave making popping or crackling sounds during operation Replaces Part Numbers This waveguide cover directly replaces the following OEM and cross-reference part numbers: W10915651, W10120230, WPW10120230, W10687366, 461967451001, AWP42398, PD00039892, EAP11769950, AP6038160, PS11769950.  If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This waveguide cover is compatible with select over-the-range and built-in microwave/oven combo models from the following brands: Whirlpool microwaves and microwave/oven combos (WOC, WOCA, WOEC series and more) KitchenAid microwaves and built-in combos Jenn-Air microwaves and built-in combos Maytag microwaves Amana microwaves Kenmore / Sears microwaves (Whirlpool-built models) Roper microwaves Admiral microwaves Magic Chef microwaves Norge microwaves Estate microwaves Ikea microwaves (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Protects the waveguide from food splatter and moisture — prevents arcing, sparking, and magnetron damage Made from mica — a heat-resistant mineral material rated for continuous high-temperature microwave exposure Dimensions: approximately 5-3/8" L x 1-3/4" W — fits the mounting slot on the interior right wall of compatible models Clips or slides into the existing mounting slot — no tools required, installs in under 5 minutes Replaces W10687366, W10120230, WPW10120230, and 461967451001 Compatible with Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, and more Replacing a burned or damaged cover immediately prevents far more expensive repairs to the magnetron or waveguide assembly Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number W10915651 Part Type Microwave Waveguide Cover (Mica Plate) Condition Aftermarket Replacement Material Mica (heat-resistant mineral) Dimensions Approximately 5-3/8" L x 1-3/4" W Location Interior right wall of the microwave cavity Installation Clips or slides into mounting slot — no tools required Compatible Brands Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, Roper, Admiral, Magic Chef, Norge, Estate, Ikea Installation Notes ⚠️ Unplug Microwave Before Starting Unplug the microwave before beginning. Open the microwave door and locate the waveguide cover on the interior right wall of the cavity — it is a flat rectangular plate, typically tan or off-white in color. If the old cover is burned, it may be stuck to the wall or disintegrating — carefully remove any remaining pieces and wipe the mounting area clean. Slide or clip the new W10915651 cover into the mounting slot on the right wall of the cavity — it should seat flat against the wall with no gaps. Ensure the cover is fully seated before use. Do not operate the microwave with a missing, cracked, or burned waveguide cover — even a small burn hole can cause arcing and progressive damage. Restore power and run a brief test cycle to confirm normal operation. Tools needed: None. A damp cloth may be needed to clean the mounting area. Frequently Asked Questions What does the waveguide cover do and why does it need to be replaced? The waveguide cover is a thin mica plate that covers the opening of the waveguide — the channel through which microwave energy travels from the magnetron into the cooking cavity. Its job is to prevent food particles, grease, and steam from entering and contaminating the waveguide. When food splatter builds up on the cover and burns, the cover develops scorch marks or burn-through holes. These damaged spots absorb microwave energy and cause arcing — sparks and electrical discharges that can quickly damage the magnetron, which is the most expensive component in the microwave. Replacing the waveguide cover promptly when it shows damage is the least expensive and most important preventive maintenance you can do for a microwave. Can I use the microwave without the waveguide cover? No — never operate a microwave with a missing, cracked, or burned waveguide cover. Without the cover, food particles and moisture can enter the waveguide directly, causing immediate arcing and sparking. Even a small hole in the cover can cause arcing. Operating the microwave in this condition risks damaging the magnetron (a $100–$200 or more repair), burning the waveguide channel, or creating a fire hazard. The waveguide cover is inexpensive and installs in minutes — always replace it before using the microwave again. My microwave is sparking — will replacing the waveguide cover fix it? Sparking is almost always caused by a burned or damaged waveguide cover, and replacing the cover resolves the sparking in the vast majority of cases. However, if the waveguide itself (the metal channel behind the cover) has been damaged from prolonged arcing, or if metal debris from a burned cover has entered the waveguide, additional cleaning or component repair may be needed. Inspect the area behind the old cover after removing it — if the wall or channel shows deep burn damage, contact our support team or a technician before operating the microwave again. How do I prevent the waveguide cover from burning again? The most effective prevention is to keep the interior of the microwave clean — specifically the waveguide cover itself and the walls near it. Wipe down the cover and interior walls with a damp cloth after each use, especially after heating anything that splashes or spatters. Use a microwave-safe cover or lid over food when heating. Never operate the microwave when empty, as this directs all microwave energy at the waveguide cover without any food to absorb it. With regular cleaning, a mica waveguide cover can last for years without needing replacement. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from heat-resistant mica to match the dimensions and fit of the original W10915651 waveguide cover. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine Bosch 00617090 Microwave Waveguide Cover - Compatible with Bosch Microwaves Product Description Protect your microwave with the Genuine Bosch 00617090 Microwave Waveguide Cover. This OEM waveguide cover is designed for select Bosch built-in microwaves, shielding the magnetron from food splatter and moisture to ensure safe and efficient operation. Made of silicone-bonded mica and measuring approximately 4-1/8" x 2-5/8"", it prevents arcing, sparking, or microwave failure due to a damaged cover, delivering reliable performance as an authentic Bosch part. Note: Includes one waveguide cover. Disconnect power before installation. Inspect waveguide channel for debris to ensure optimal performance. Replaces part numbers: 00617090, 12014089, PD00053143, EAP9492671, AP5806321, PS9492671. Compatibility: Compatible with models including but not limited to: Bosch: HBL5751UC/01, HBL8751UC/01, HMC80151UC/01, HMC87151UC/01, HMC80152UC/01, HMC80251UC/01, HMC80252UC/01, HMC87152UC/01, HMB50152UC/01, HMB50162UC/01, HMB57152UC/01 Thermador: (select models, verify compatibility) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Bosch built-in microwaves. 🛡️ Specifications: OEM waveguide cover, silicone-bonded mica, approximately 4-1/8" x 2-5/8". 💪 Reliable Performance: Authentic Bosch part ensures long-lasting durability. 🛠️ Easy Installation: Requires screwdriver; typically installed in 5–10 minutes. 🔥 Effective Fixes: Prevents arcing, sparking, or microwave failure due to damaged cover. Product Specification Part Number: Genuine Bosch 00617090 Component Type: Microwave waveguide cover Material: Silicone-bonded mica Mounting: Screw-mounted or clip-in (model-dependent) Operating Conditions: Suitable for high-temperature microwave environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the microwave from the power source before installation. Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your microwave running safely today! Add to cart now for a reliable fix!

Read more less

WG447 Microwave Mica Sheet, Waveguide Cover – Compatible with Whirlpool, GE, Samsung, LG, Panasonic, and More Product Description Protect your microwave’s internal components with the WG447 Microwave Mica Sheet / Waveguide Cover. Microwave mica chips can effectively prevent water or oil and other substances from splashing on the magnetron or other components during the heating process of food. Protect the microwave oven from burning. Size can be cut: The waveguide cover size is 10 cm*10.8 cm (3.93 in x 4.65 in), you could cut it into any size to fit your microwave oven. Easy to cut. Widely used: As a kind of heat resisting and insulating product. Mica Plates is widely used in household appliances such as hair dryers, toasters, microwave ovens, warmers, etc.  Replaces Part Numbers universal microwave mica sheet equivalents. Size can be cut: The waveguide cover size is 10 cm*10.8 cm (3.93 in x 4.65 in), you could cut it into any size to fit your microwave oven. Easy to cut.   Compatibility This replacement waveguide cover fits a wide range of Whirlpool, GE, Samsung, LG, Panasonic, Emerson, Sharp, Kenmore, and other microwaves that use a cut-to-fit mica sheet. Common compatible models include (but are not limited to):Whirlpool WMH31017HS, GE JVM3160RFSS, Samsung ME18H704SFS, LG LMV1762ST, Panasonic NN-SN766S. Always compare dimensions before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Universal cut-to-fit design matches OEM insulation and heat resistance ⚡ Restores Safe Operation – Prevents arcing, sparking, and microwave energy leakage 🔥 Heat & Moisture Resistant – Made from high-grade mica composite ✂️ Easy to Trim – Can be cut to match original waveguide cover size 🛡️ Fixes Common Issues – Solves sparking, burning smell, and uneven heating caused by damaged covers 📐 Product Specification Part Number: WG447 Component Type: Microwave Mica Sheet / Waveguide Cover Material: Heat-resistant mica composite Dimensions: Approx. 6" × 6" (can be trimmed to size) Thickness: Standard 0.3–0.4 mm mica sheet Mounting: Press-fit or screw-secured depending on model Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Scissors or utility knife (for trimming), screwdriver (if applicable) ⚠️ Safety First: Always unplug the microwave before servicing. Do not operate the microwave without a waveguide cover. Steps: Disconnect power and remove the old burned or damaged mica cover. Use the old cover as a template to trim the new WG447 mica sheet. Align the new cover over the waveguide opening. Press into clips or secure with screws depending on your model. Restore power and test heating performance. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Stop microwave sparking and restore safe heating — Add to Cart Now for a quick, reliable fix!

Read more less

WG446 Microwave Universal Mica Sheet, Waveguide Cover (Pack of 2) – Compatible with Most Microwave Brands Product Description Protect your microwave from sparking, arcing, and grease buildup with the WG446 Microwave Universal Mica Sheet / Waveguide Cover (Pack of 2). These high-quality aftermarket mica sheets shield the waveguide opening from moisture, steam, and food splatter, helping maintain efficient and safe microwave operation. Ideal for replacing damaged, burnt, or contaminated covers, this 2-pack offers excellent value and universal fit. Replaces Part Numbers WG446, Universal Mica Waveguide Cover and equivalent microwave mica sheet replacements Compatibility This universal waveguide cover 2-pack fits a wide range of Samsung, Whirlpool, GE, LG, Panasonic, Sharp, Kenmore, Emerson, and many other microwaves that use cut-to-fit mica sheets. Suitable for models such as (but not limited to):LG LMV1762ST, Samsung ME16H702SES, Whirlpool WMH31017HZ, GE JVM3160RFSS, Panasonic NN-SN686S. Always match the original cover’s dimensions before installation. Contact our support team if you’re unsure. ✅ Key Features 🔄 Universal Aftermarket Replacement – Cut-to-fit design works with most microwave brands 🧱 High-Heat Protection – Prevents debris from entering the waveguide and causing sparks ✂️ Trim-to-Size Sheets – Easy to cut using scissors or a utility knife 💰 2-Pack Value – Keep an extra sheet available for future replacements 🛡️ Fixes Common Issues – Eliminates sparking, burning smell, poor heating, or arcing caused by damaged covers 📐 Product Specification Part Number: WG446 Component Type: Microwave Mica Sheet / Waveguide Cover Material: Heat-resistant mica composite Dimensions: Approx. 5.9"L x 4.7"W (15 cm x 12 cm) (can be trimmed to size) Thickness: standard mica insulation Mounting: Clips or screws depending on microwave model Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Scissors or utility knife, screwdriver (if screws are used) ⚠️ Safety First: Unplug the microwave before installation. Never operate without a waveguide cover. Steps: Disconnect power and remove the old waveguide cover. Use the original cover as a template to trace and cut the new WG446 sheet. Insert the new cover into the mounting clips or secure with screws. Repeat with the second sheet if needed. Restore power and test heating. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Prevent microwave sparking and prolong appliance life — Add to Cart Now for a cost-effective, universal repair solution!

Read more less

WG24 Microwave Universal Mica Sheet, Waveguide Cover (2.5" × 4.2") – Fits Most Microwave Ovens Product Description Restore safe and efficient microwave operation with the WG24 Microwave Universal Mica Sheet / Waveguide Cover. This heat-resistant mica sheet protects the waveguide opening from grease, moisture, and food splatter while allowing microwaves to pass through efficiently. A damaged or burned waveguide cover can cause sparking, arcing, or uneven heating. Replacing it with this durable WG24 mica sheet helps prevent damage to the magnetron and ensures consistent microwave performance. Replaces Part Numbers WG47, Microwave Mica Sheet, Universal Waveguide Cover, Microwave Waveguide Plate Compatibility This universal microwave mica sheet is compatible with most countertop, over-the-range, and built-in microwave ovens from major brands including GE, Whirlpool, Samsung, LG, Panasonic, Kenmore, Frigidaire, and more. ⚠️ Universal fit — may be trimmed to size if required. Always verify dimensions before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Universal Replacement – Fits most microwave waveguide openings 🔥 Heat-Resistant Mica Material – Withstands high temperatures without burning ⚡ Prevents Sparking & Arcing – Protects waveguide and magnetron ✂️ Customizable Fit – Can be trimmed for exact size 💰 Cost-Effective Repair – Extends microwave life at minimal cost 📐 Product Specification Part Number: WG24 Component Type: Microwave Waveguide Cover / Mica Sheet Material: Natural mica Dimensions: 2.5 inches × 4.2 inches Thickness: OEM-equivalent Color: Light brown Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Scissors (if trimming required), Phillips screwdriver ⚠️ Safety First: Unplug the microwave before servicing. Steps: Disconnect microwave from power. Remove the old or damaged waveguide cover. Clean the waveguide opening area. Trim the WG24 mica sheet if necessary. Install the new mica sheet using the original mounting method. Restore power and test microwave operation. ⏱️ Time Required: 5–10 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Eliminate sparking and protect your microwave — Add to Cart Now for a simple, effective repair!

Read more less

XPARTCO WB39X10034 Microwave Waveguide Cover – Compatible with GE Microwaves Product Description Protect your microwave’s internal components from grease, steam, and food splatter with the XPARTCO WB39X10034 Microwave Waveguide Cover. This high-quality aftermarket replacement shields the magnetron and waveguide channel, preventing damage and reducing the risk of sparking or arcing. A burned, cracked, or missing waveguide cover can cause uneven heating or loud popping sounds. Replacing it with this XPARTCO cover restores safe and efficient microwave performance. Replaces Part Numbers WB39X10034, 1810876, 262100100006, EAP3486812, PD00057680, AH3486812, EA3486812, AP4980541, PS3486812. Compatibility This replacement waveguide cover fits select GE microwaves, including countertop, over-the-range, and built-in units. Example compatible models include (but are not limited to):GE JVM1340WW002, JVM1660WB004, JVM1540DN1WW, and many additional models. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and heat resistance 🔥 High-Temperature Mica Material – Safely withstands microwave energy and heat 🛡️ Protects Waveguide Channel – Prevents grease and food particles from reaching the magnetron 💰 Budget-Friendly Solution – Reliable alternative to OEM waveguide covers 🛠️ Quick Installation – Easily installs with clips or screws depending on model ⚡ Fixes Common Issues – Solves sparking, arcing, burning smells, and uneven heating 📐 Product Specification Part Number: WB39X10034 Component Type: Microwave Waveguide Cover Material: Mica sheet (heat-resistant composite) Color: Light gray Mounting: Clip-in or screw-in (varies by microwave model) Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver (if screw-mounted) ⚠️ Safety First: Always unplug the microwave before servicing.Microwave repairs involve high voltage even when unplugged — avoid internal access unless qualified. Steps: Disconnect microwave power. Locate the old or damaged waveguide cover inside the cavity. Remove clips or screws holding the cover. Install the new XPARTCO WB39X10034 cover securely in place. Ensure there are no gaps around the edges. Restore power and test for normal heating. ⏱️ Time Required: 1–3 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Stop microwave sparking and protect internal components — Add to Cart Now for a fast, reliable fix!

Read more less

2-Pack XPARTCO WB03X27704 Microwave Waveguide Locking Button – Compatible with GE Microwaves Product Description Protect your microwave’s internal components with the XPARTCO WB03X27704 Microwave Waveguide Locking Button. This high-quality aftermarket replacement secures the waveguide cover in place, preventing it from shifting, falling, or allowing food splatter to enter the waveguide channel. A broken or missing locking button can lead to sparking, uneven heating, or damage to the magnetron. Replacing it with this durable XPARTCO button restores safe and reliable microwave performance. Replaces Part Numbers WB03X27704, WB02X10997, PD00045753, EAP12582530, AP6783280, 4813990, PS12582530 Compatibility This replacement waveguide locking button fits select GE countertop, over-the-range, and built-in microwaves. Example compatible models include (but are not limited to):GE JVM3160DFWW, JVM6175SK3SS, JVM7195SK5SS, PVM9005SJ2SS, and many others. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit, size, and retention strength 🔒 Secures Waveguide Cover – Prevents shifting, sparking, or magnetron contamination 💰 Cost-Effective Solution – Affordable alternative to OEM locking buttons 🛠️ Durable Construction – Precision-molded plastic resists heat and wear 🛡️ Fixes Common Issues – Solves loose or missing cover, arcing, or uneven microwave heating 📐 Product Specification Part Number: WB03X27704 Component Type: Microwave Waveguide Cover Locking Button Material: High-strength molded plastic Color: Black (may vary slightly by batch) Mounting: Snaps into microwave cavity to retain waveguide cover Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: None (in most models) ⚠️ Safety First: Always unplug the microwave before servicing.Microwaves contain high-voltage components even when unplugged — avoid internal access unless qualified. Steps: Disconnect power to the microwave. Open the microwave interior and remove the damaged or missing locking button. Position the new XPARTCO WB03X27704 locking button in the designated cavity slot. Press firmly until it snaps into place. Ensure the waveguide cover is securely held. Restore power and test microwave operation. ⏱️ Time Required: 1–2 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your microwave and prevent sparking — Add to Cart Now for a fast, reliable fix!

Read more less

XPARTCO MCK69074904 Microwave Waveguide Cover / Insulator The XPARTCO MCK69074904 is an aftermarket replacement waveguide cover, also known as an insulator cover or mica plate, for LG microwaves and select Bosch models. This cover protects the opening where microwave energy enters the cooking cavity from the magnetron. By covering that opening, it ensures microwaves are distributed evenly throughout the cavity while also preventing food particles, grease, and moisture from reaching and damaging the internal waveguide components. Made of mica, a material that's essentially invisible to microwave energy, this cover measures approximately 4.88" x 4.94" (126mm x 124mm including tabs) and includes a locking button/pin tab for secure mounting. Over time, splattering food and moisture exposure can cause the mica to degrade, warp, or become contaminated, and old, damp, or contaminated mica can react to microwave energy by arcing. If this cover becomes damaged, you'll typically notice sparks or arcing inside the microwave during use, along with possible uneven heating as microwave distribution is no longer properly controlled. It directly replaces MCK69074904, MCK69074902, 4957254, AP6888006, EAP12725272, ALG55468, PD00056750, PS12725272. Quick Answer The XPARTCO MCK69074904 Microwave Waveguide Cover / Insulator fixes LG (and select Bosch) microwaves showing sparks or arcing inside the cavity during use, or heating unevenly. Mica plate, approx. 4.88" x 4.94", locking button/pin tab. Replaces MCK69074904, MCK69074902, 4957254, AP6888006, EAP12725272, ALG55468, PD00056750, PS12725272. Accessing this cover means opening the microwave's outer cabinet, which also exposes the high-voltage capacitor — treat that area with the same caution as any internal microwave repair. Common Problems This Part Fixes Sparks or arcing visible inside the microwave cavity during use Uneven heating as microwave energy distribution is disrupted Visibly damaged, warped, or contaminated mica cover Burning smell during operation caused by arcing at the waveguide opening Food particles or moisture damage near the magnetron opening Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This microwave waveguide cover directly replaces the following OEM and cross-reference part numbers: MCK69074904, MCK69074902, 4957254, AP6888006, EAP12725272, ALG55468, PD00056750, PS12725272. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This waveguide cover is compatible with select LG microwaves, including model numbers such as LMC0975AST, LMC0975ASZ, LMC0975SB, LMC0975ST, LMC1275SB, LMC1375SB, LMC1375SW, LMC1575BD, LMC1575SB, LMC1575ST, LMC1575SW, MH1536GIR, MH1596CIR, MS0936GIS, MS1536GIR, MS1596CIR, and MSWN1590L. It has also been used as a compatible replacement on select Bosch microwave models built on related platforms. Note: Always verify your full model number before ordering, since LG uses several different waveguide cover sizes and mounting styles across its microwave lineup. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement waveguide cover — protects the magnetron opening and ensures even microwave distribution Resolves "sparking or arcing inside the cavity" and "uneven heating" symptoms caused by a damaged cover Mica construction — resistant to high temperature and corrosion, essentially invisible to microwave energy Approximately 4.88" x 4.94" (126mm x 124mm including tabs) Locking button/pin tab for secure mounting Direct drop-in replacement matching the original mounting and dimensions Replaces MCK69074904, MCK69074902, 4957254, AP6888006, EAP12725272, ALG55468, PD00056750, PS12725272 Compatible with LG and select Bosch microwaves Aftermarket replacement built to OEM-equivalent quality standards Simple 15 to 30 minute repair Product Specifications Part Number XPMCK69074904 OEM Part Number MCK69074904 Part Type Microwave Waveguide Cover / Insulator (Mica Plate) Condition Aftermarket Replacement Material Mica Dimensions Approx. 4.88" x 4.94" (126mm x 124mm incl. tabs) Mounting Locking button/pin tab Function Protects the waveguide opening and ensures even microwave distribution Repair Difficulty Easy — 15 to 30 minutes Quantity 1 waveguide cover Compatible Brands LG, select Bosch Installation Notes ⚠️ Unplug Microwave Before Starting — Be Aware Of The High-Voltage Capacitor Inside Unplug the microwave from the wall outlet and move it away from the wall to give yourself room to work. Wear work gloves. Carefully remove the microwave's exterior cover, taking care not to tear or damage the clips that secure it in place, and set it aside. Microwave ovens contain a high-voltage capacitor that can retain a dangerous electrical charge even after the unit is unplugged — avoid touching internal components near the capacitor and magnetron while working inside the cabinet. Locate the old waveguide cover inside the cavity, typically secured by a locking tab or small screws depending on your model. Remove the old cover, taking care not to damage the surrounding cavity surface. Install the new MCK69074904 in the same position, making sure it seats flush and the locking tab engages securely. Reinstall the exterior cover, restore power, and run a quick test with a cup of water to confirm normal heating with no sparking or arcing. Tools needed: Phillips screwdriver (model-dependent), work gloves. Frequently Asked Questions I see sparks inside my microwave. Is this the part I need? Yes, this is the classic and most direct symptom of a damaged waveguide cover. Old, damp, warped, or food-contaminated mica can react to microwave energy by arcing at the point where it's damaged. Replacing the cover typically resolves this sparking immediately. Is it safe to keep using my microwave if I notice sparking? No, it's best to stop using the microwave once you notice sparking or arcing and replace the cover as soon as possible. Continued arcing can cause more serious damage to the magnetron and other internal components, turning a simple, inexpensive repair into a much costlier one. What is mica, and why is it used for this part? Mica is a naturally heat-resistant, corrosion-resistant material that is essentially invisible to microwave energy, meaning it doesn't interfere with or absorb the microwaves passing through it. This makes it ideal for a cover positioned directly in the path of the microwave energy entering the cavity, since it protects the opening without disrupting how the microwave actually cooks food. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured to match the mica composition, dimensions, and mounting configuration of the original MCK69074904 waveguide cover used in compatible LG and Bosch microwaves. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WB03X27704 Microwave Waveguide Locking Button – Compatible with GE Microwaves Product Description Protect your microwave’s internal components with the XPARTCO WB03X27704 Microwave Waveguide Locking Button. This high-quality aftermarket replacement secures the waveguide cover in place, preventing it from shifting, falling, or allowing food splatter to enter the waveguide channel. A broken or missing locking button can lead to sparking, uneven heating, or damage to the magnetron. Replacing it with this durable XPARTCO button restores safe and reliable microwave performance. Replaces Part Numbers WB03X27704, WB02X10997, PD00045753, EAP12582530, AP6783280, 4813990, PS12582530 Compatibility This replacement waveguide locking button fits select GE countertop, over-the-range, and built-in microwaves. Example compatible models include (but are not limited to):GE JVM3160DFWW, JVM6175SK3SS, JVM7195SK5SS, PVM9005SJ2SS, and many others. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit, size, and retention strength 🔒 Secures Waveguide Cover – Prevents shifting, sparking, or magnetron contamination 💰 Cost-Effective Solution – Affordable alternative to OEM locking buttons 🛠️ Durable Construction – Precision-molded plastic resists heat and wear 🛡️ Fixes Common Issues – Solves loose or missing cover, arcing, or uneven microwave heating 📐 Product Specification Part Number: WB03X27704 Component Type: Microwave Waveguide Cover Locking Button Material: High-strength molded plastic Color: Black (may vary slightly by batch) Mounting: Snaps into microwave cavity to retain waveguide cover Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: None (in most models) ⚠️ Safety First: Always unplug the microwave before servicing.Microwaves contain high-voltage components even when unplugged — avoid internal access unless qualified. Steps: Disconnect power to the microwave. Open the microwave interior and remove the damaged or missing locking button. Position the new XPARTCO WB03X27704 locking button in the designated cavity slot. Press firmly until it snaps into place. Ensure the waveguide cover is securely held. Restore power and test microwave operation. ⏱️ Time Required: 1–2 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your microwave and prevent sparking — Add to Cart Now for a fast, reliable fix!

Read more less

6324W1A001L Genuine LG OEM Microwave Magnetron The 6324W1A001L is a genuine LG OEM magnetron for microwave ovens and microwave/oven combination units. The magnetron is the component that actually generates the microwave energy used to cook and heat food — it converts high-voltage electrical power into microwave-frequency radiation, which is then directed into the oven cavity by the waveguide to agitate water molecules in your food and produce heat. Without a functioning magnetron, every other part of the microwave can work perfectly — the turntable spins, the display counts down, the fan runs — while the food inside never actually heats up. This is a genuine LG-manufactured magnetron used not only in LG microwaves but also, under LG's role as a shared component supplier, in microwaves sold under Frigidaire, Whirlpool, Kenmore, GE, Jenn-Air, Thermador, KitchenAid, Panasonic, Goldstar, Crosley, Gaggenau, Amana, and Bosch branding. Measuring approximately 4.5"L x 4.25"W x 5"H. A failed magnetron produces a distinct symptom: the microwave runs normally in every other respect — it powers on, the turntable turns, the timer counts down — but the food inside stays cold. Sparking or arcing behind the waveguide cover, visible burn marks on the magnetron, or a burning smell are also signs of magnetron failure or damage. It directly replaces 6324W1A001A, 6324W1A001B, 6324W1A001E, 6324W1A001H, 6324W1A001Y, AGF76878403, AP4457332, EAS42812905, EAS42812906, EAS42812937, PS3529034, and 1268208. Quick Answer The 6324W1A001L Genuine LG OEM Microwave Magnetron fixes microwaves and microwave/oven combos that run normally — turntable spins, display works, timer counts down — but the food never actually heats up. Also fixes sparking or arcing behind the waveguide cover. Approximately 4.5"L x 4.25"W x 5"H. Replaces 6324W1A001A, 6324W1A001B, 6324W1A001E, 6324W1A001H, 6324W1A001Y, AGF76878403, AP4457332, EAS42812905, EAS42812906, EAS42812937, PS3529034, 1268208. Microwaves contain a high-voltage capacitor that stores a dangerous charge even after unplugging — always discharge it before accessing the magnetron. Common Problems This Part Fixes Microwave runs normally — turntable spins, display works, timer counts down — but food doesn't heat up Microwave heats very weakly or inconsistently Sparking or arcing visible behind the waveguide cover in the oven cavity Burning smell coming from the microwave during or after use Visible smoke from inside the cavity Burn marks or visible damage on the magnetron itself Loud humming with no heating effect on food Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This microwave magnetron directly replaces the following OEM and cross-reference part numbers: 6324W1A001L, 6324W1A001A, 6324W1A001B, 6324W1A001E, 6324W1A001H, 6324W1A001Y, AGF76878403, AP4457332, EAS42812905, EAS42812906, EAS42812937, PS3529034, WB26X32629, AP6888676, WB27X26081, WB27X10305, 4930994, WB27X10876. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This magnetron is compatible with select microwaves and microwave/oven combos from a wide range of brands, since LG manufactures this component for use across multiple appliance brands, including: LG (including LRM2060ST and LMV2031ST models) Kenmore, GE, Frigidaire, Whirlpool, and Amana Jenn-Air, KitchenAid, Thermador, Gaggenau, and Bosch Panasonic, Goldstar, and Crosley Note: Even though this magnetron is used across many brands, magnetrons that look similar can have small but important variations in size and shape between models. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine LG OEM part — factory-specified microwave frequency output and mounting configuration Generates the microwave energy that cooks and heats food Resolves "runs but doesn't heat," "weak or inconsistent heating," "sparking behind the waveguide," and "burning smell" symptoms caused by magnetron failure Approximately 4.5"L x 4.25"W x 5"H Direct drop-in replacement — matches the original mounting bracket and waveguide alignment Replaces 6324W1A001A, 6324W1A001B, 6324W1A001E, 6324W1A001H, 6324W1A001Y, AGF76878403, AP4457332, EAS42812905, EAS42812906, EAS42812937, PS3529034, and 1268208 Widely compatible across LG, Kenmore, GE, Frigidaire, Whirlpool, Jenn-Air, KitchenAid, Thermador, Panasonic, Goldstar, Crosley, Gaggenau, Amana, and Bosch microwaves Genuine OEM replacement — guaranteed fit, materials, and performance Moderate DIY repair for those comfortable with microwave high-voltage safety procedures Product Specifications Part Number 6324W1A001L Part Type Microwave Magnetron Condition Genuine OEM Brand LG Application Microwave Ovens / Microwave-Oven Combos Function Generates the microwave energy used to heat and cook food Dimensions Approx. 4.5"L x 4.25"W x 5"H Repair Difficulty Moderate — high-voltage discharge required Quantity 1 magnetron Compatible Brands LG, Kenmore, GE, Frigidaire, Whirlpool, Amana, Jenn-Air, KitchenAid, Thermador, Gaggenau, Bosch, Panasonic, Goldstar, Crosley Installation Notes ⚠️ Danger — Microwave High-Voltage Capacitor Unplug the microwave before beginning any work. Microwaves contain a high-voltage capacitor that can store a dangerous, potentially lethal electrical charge even after the unit has been unplugged. Before opening the cabinet or touching any internal component, discharge the capacitor using an insulated screwdriver shorted across its terminals — never touch the capacitor or its terminals directly, and never work on a microwave's internals without performing this step first. If you are not fully comfortable and experienced with high-voltage discharge procedures, have a qualified appliance technician perform this repair instead. ⚠️ Test Other High-Voltage Components Before Assuming It's The Magnetron Wear work gloves. After confirming the capacitor is fully discharged, remove the outer cabinet to access the internal components. Before replacing the magnetron, it's worth testing the other high-voltage components — the transformer, diode, and capacitor — since a fault in any of these can produce similar "runs but doesn't heat" symptoms, and replacing the magnetron alone won't fix the problem if one of these other parts has actually failed. Photograph the magnetron's mounting and waveguide connection before removing anything. Disconnect the magnetron's electrical leads, remove the mounting screws securing it to the waveguide assembly, and carefully lift the old magnetron free. Install the new 6324W1A001L in the same orientation, aligning it correctly with the waveguide opening, and secure the mounting screws. Reconnect the electrical leads exactly as they were before removal. Reinstall the outer cabinet, restore power, and test with a cup of water to confirm normal heating without unusual sounds, sparking, or smoke. Tools needed: nut driver or socket set, Phillips screwdriver, insulated screwdriver for capacitor discharge, multimeter (for testing other components), work gloves. Frequently Asked Questions My microwave runs but doesn't heat anything. Is this the right part? It's the most common cause of exactly that symptom. When the turntable spins, the display works, and the timer counts down normally, but food comes out just as cold as it went in, the magnetron has very likely failed. Other high-voltage components (the transformer, diode, or capacitor) can sometimes cause the same symptom, so if you're comfortable testing with a multimeter, it's worth ruling those out first — but a failed magnetron is the single most frequent cause reported for this exact complaint. Why does the same part fit so many different brands? LG manufactures magnetrons and other core components that get used across microwaves sold under many different brand names, since several appliance companies share manufacturing platforms or source key parts from the same suppliers rather than building everything in-house. This is a normal and well-documented part of how microwave manufacturing works — it doesn't mean the part is generic or lower quality, just that LG's magnetron design is used broadly across the industry. I see sparking behind the cover inside the microwave. Is that the magnetron? It can be. Sparking or arcing behind the waveguide cover, especially with visible smoke or a burning smell, points to damage in the magnetron or the waveguide area. Inspect the magnetron for burn marks once you've safely discharged the capacitor and opened the cabinet — if you see charring or damage, replacement is the correct fix. Stop using the microwave immediately if you notice sparking, smoke, or burning smells. Do I need any special skills to replace this part? This is a moderate DIY repair, and the key skill required isn't mechanical — it's safely discharging the microwave's high-voltage capacitor before doing anything else. If you're not fully confident performing that step correctly, this is a good repair to leave to a qualified appliance technician, since the capacitor can hold a dangerous charge even with the unit unplugged. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original microwave frequency output, mounting configuration, and dimensions of the magnetron originally installed in your microwave. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WB27X10880 Genuine OEM Microwave Magnetron Description:  This Magnetron is an OEM replacement part responsible for generating the microwave energy that heats and cooks your food. Located within the microwave's cooking chamber, typically behind the control panel and connected to the waveguide, the magnetron emits high-frequency microwaves, which are then distributed throughout the cooking cavity. This electromagnetic radiation excites water molecules in the food, causing them to heat up and cook the food quickly and efficiently. Replaces Part Numbers: WB27X10880, 1167227, AH1019593, EA1019593, AP3860541, PS1019593.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO WB02X35488 Microwave Halogen Light Bulb Product Overview The XPARTCO WB02X35488 Microwave Halogen Light Bulb provides bright interior illumination for your microwave, allowing you to clearly monitor cooking progress. Brighten your microwave with the replacement WB02X35488 Microwave Halogen Light Bulb. This high-quality Light bulb, designed for GE, Hotpoint, and Kenmore/Sears microwaves, provides clear illumination for the interior or surface below, ensuring easy monitoring of your cooking. Featuring a G8 bi-pin base (120V, 50W, 3000K warm white), this durable halogen bulb offers reliable performance and easy installation. Quick Answer If your microwave light is dim, flickering, or not working, the WB02X35488 halogen bulb may be burned out. Replacing it restores clear visibility while cooking. Replaces Part Numbers Replaces OEM part number: WB02X35488, WB08X10057, WB08X10051, WB25X25393, WB36X10292, AGE368071, PD00070655, EAP6989401, AP6989401, PS16216934. Compatibility This microwave halogen light bulb is compatible with select GE, Hotpoint, and other GE-manufactured microwaves. GE: CSA1201RSS01, CSA1201RSS02, CSA1201RSS03, CVM1790SS1SS, CVM1790SS2SS, JVM1790BK01, JVM1790CK01, JVM1790SK01, JVM1790WK01, JNM3163RJ1SS, JNM3163RJ2SS, JNM3163RJ3SS Hotpoint: Select models requiring WB08X10057 or compatible halogen bulbs Kenmore/Sears: Select models requiring WB08X10057 or compatible halogen bulbs Always verify your appliance model number before ordering. Common Problems This Part Fixes Microwave interior light not working Dim or flickering light Reduced visibility while cooking Key Features Bright halogen illumination Restores clear interior visibility High-quality aftermarket replacement Easy bulb replacement design Product Specifications Part Number: WB02X35488 Part Type: Microwave Halogen Light Bulb, 120V, 50W, G8 bi-pin base, 1.69" x 0.5", 3000K warm white, 2400 lumens, dimmable, 2000-hour average life, copper contacts. Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Microwave Interior Lighting Troubleshooting Guide No interior light → Burned out bulb Flickering light → Failing bulb Dim light → Aging or damaged bulb When Should You Replace This Bulb? Replace this bulb if your microwave interior light is not functioning properly or has become dim or inconsistent. Installation Notes ⚠️ Disconnect power before installation. Allow the bulb to cool before handling and replace carefully according to your microwave model. Related Parts Microwave Door Switch Control Panel Turntable Motor Frequently Asked Questions Will this bulb fit my microwave?This bulb fits many GE and compatible models. Always verify your model number. Is this a halogen bulb?Yes, this is a halogen light bulb designed for microwave use. What are signs of a bad bulb?No light, dim light, or flickering indicates replacement is needed. Is installation difficult?Most bulbs are easy to replace, but always follow your appliance manual. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less