Search results for "dishwasher fuse"

XPARTCO 675813 Dishwasher Thermal Fuse The XPARTCO 675813 is an aftermarket replacement bimetal thermal fuse (TCO — thermal cut-off) kit compatible with a wide range of Whirlpool-family dishwashers including Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, and Admiral. The thermal fuse is a one-time safety device located on or near the control board that monitors internal temperature. If the dishwasher overheats — due to a blocked vent, malfunctioning heating element, or other fault — the fuse permanently interrupts power to protect the dishwasher and prevent fire hazards. Unlike a resettable thermostat, a blown thermal fuse must be replaced. Once it trips, the dishwasher will show no power and will not start. The kit includes one thermal cutoff fuse with a 2-wire harness (leads extending approximately 18 inches from the fuse), one zip tie, and installation instructions. The fuse body measures 1-1/16" L x 1" W x 7/16" H. The new wiring harness must always be used when replacing the fuse. Installs in 5–15 minutes with basic hand tools. Quick Answer The XPARTCO 675813 Dishwasher Thermal Fuse Kit fixes Whirlpool-family dishwashers that show no power, won't start, have a blank control panel, or stopped mid-cycle with no response. The thermal fuse permanently trips when the dishwasher overheats and must be replaced. Kit includes fuse with 2-wire harness, zip tie, and instructions. Fuse body 1-1/16" L x 1" W x 7/16" H. Always install using the new harness included. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, and more. Common Problems This Part Fixes Dishwasher completely dead — no power, no lights, no response when buttons are pressed Control panel blank with no indicator lights or display Dishwasher stopped mid-cycle and will not restart Dishwasher will not start despite the door being closed and latched No sounds when attempting to start the dishwasher Dishwasher behaves as if it has no power even though the outlet is live Replaces Part Numbers This dishwasher thermal fuse kit directly replaces the following OEM and cross-reference part numbers: 675813, 3375557, 3376359, 675813VP, 679723, AH382828, OEM9345567, AWP39651 PD00002439, EA382828, EAP382828, AP3115186, PS382828. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermal fuse kit is compatible with select dishwashers from the following brands: Whirlpool dishwashers Kenmore / Sears dishwashers (Whirlpool-built models) KitchenAid dishwashers Maytag dishwashers Estate dishwashers Crosley dishwashers Inglis dishwashers Roper dishwashers Admiral dishwashers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Bimetal thermal cut-off (TCO) fuse — permanently interrupts power if the dishwasher overheats, protecting against fire hazard One-time safety device — once tripped, the fuse must be replaced (it does not reset) Rated at 98°C — trips when internal temperature exceeds the safe operating limit Fuse body dimensions: 1-1/16" L x 1" W x 7/16" H; leads extend approximately 18" from fuse Kit includes thermal fuse with 2-wire harness, zip tie, and installation instructions Always install using the new harness included — never reuse the old harness Metal and plastic construction — reliable performance and heat resistance Direct replacement for 675813, 675813VP, 3375557, and 3376359 — no modification required Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 5–15 minutes with basic hand tools Product Specifications Part Number 675813 Part Type Dishwasher Thermal Fuse / Thermal Cut-Off (TCO) Kit Condition Aftermarket Replacement Fuse Type Bimetal thermal cut-off (one-time, non-resettable) Trip Temperature 98°C (208°F) Fuse Body Dimensions 1-1/16" L x 1" W x 7/16" H Lead Length Approximately 18 inches from fuse body Color White / Brown Material Metal / Plastic Kit Includes Thermal cutoff fuse with 2-wire harness, zip tie, instructions Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Estate, Crosley, Inglis, Roper, Admiral Installation Notes ⚠️ Unplug or Switch Off Breaker Before Starting Unplug the dishwasher or turn off the circuit breaker before beginning any repair. The thermal fuse is located inside the dishwasher door panel near the control board. Open the dishwasher door and remove all screws from the inner door panel — a Torx bit is typically required on Whirlpool-family models. Carefully lift the inner door panel to expose the control board housing. Remove the black plastic cover over the control board to access the thermal fuse — it is typically on the right side of the board with one wire connected to each terminal. Test the old fuse with a multimeter for continuity (no continuity confirms the fuse has blown). Disconnect the old fuse and its harness. Connect the new 675813 fuse using the new 2-wire harness included in the kit — do not reuse the old harness. Secure the harness with the included zip tie. Reinstall the control board cover, inner door panel, and all screws. Restore power and run a test cycle. Note: If the fuse blows again after replacement, an underlying cause such as a blocked vent, failed heating element, or faulty control board should be diagnosed before replacing the fuse a second time. Tools needed: Torx screwdriver (T15 or T20), Phillips screwdriver, multimeter, work gloves. Frequently Asked Questions What does the dishwasher thermal fuse do? The thermal fuse is a one-time safety device that monitors the internal temperature of the dishwasher. If the temperature rises above the safe operating limit — 98°C in this case — the fuse permanently interrupts the electrical circuit, cutting all power to the dishwasher. This protects both the appliance and your home from fire hazard caused by overheating. Unlike a resettable thermostat, a blown thermal fuse cannot be reset and must be physically replaced. How do I know if my thermal fuse has blown? The most obvious sign is a completely dead dishwasher — no lights, no sounds, and no response when you press any buttons, even though the outlet has power. You can confirm a blown fuse with a multimeter: disconnect the fuse from the harness and test for continuity across its two terminals. A working fuse will show continuity (near-zero resistance); a blown fuse will show no continuity (open circuit). If the fuse tests bad, replace it with the 675813 kit. Why did my thermal fuse blow, and will it happen again? Thermal fuses blow when the dishwasher overheats. Common causes include a blocked air vent, a malfunctioning or shorted heating element, a failed thermostat, or an electrical fault in the control board. If you simply replace the fuse without addressing the root cause, it may blow again. After replacing the fuse, run the dishwasher and monitor for any unusual heat, steam, or burning smell. If the fuse blows again, have the underlying fault diagnosed before ordering another replacement. Why must I use the new harness and not the old one? When a thermal fuse blows, the wiring harness connected to it may have been exposed to the same overheating event that tripped the fuse. The wires or connectors may have degraded or partially melted even if they appear intact. Using the old harness risks a poor connection or a recurring fault. Always install the new 2-wire harness included in the kit to ensure a reliable, safe connection. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from metal and plastic to match the dimensions, trip temperature, and performance of the original 675813 thermal fuse. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

20A Ceramic Fuse 6.35 x 32 mm, 20A 250V - Compatible with GE, Whirlpool, Kenmore, Maytag, Frigidaire, LG, Samsung and Other Appliances Product Description Protect your appliances with the replacement 20A Slow-Blow Ceramic Fuse 6.35 x 32 mm, 20A 250V. This high-quality time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances like microwaves, washers, dryers, and spa control systems. With a ceramic body for durability and heat resistance, this fuse (6.35 x 32 mm, 20A, 250V AC) safeguards circuits from over current and short circuits while tolerating brief surges. It addresses issues like appliance failure, power loss, or blown fuses.  Note: Includes one ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements. Replaces part numbers: EXP20A, MDA-20, 0326020.HXP, 0326020.MXDP, BK1-MDP-20-R, BK-MDP-V-20-R, GSA20, 8020.0605, 8020.0605.G, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WP4375321, W11305892, W11305905, AP6009296, PS11742452, 3601-001198, AP4046006, PS4131369, 5F1CD2031S, AP4565040, 1206681, 4922155, WB27X11151, AP4980434, PS3486702, WB27X11151, AP4980434, PS3486702, WB2X3910, PS242167, AP2010811, WB2X3910, WB27X995, WB27X945, B27X10388, PS239525, AP2631556, WP8183507, 8183507, PS11745084, AP6011884, M0805101, AP6014669, PS11747931, WPM0805101, 5304423383, PS472662, AP2151673, EA472662, WB27X10928, AP3994062, WB27X10388, AH1481237, EA1481237, PS1481237, W11707984, W10138793, AP7225218, PS17629444, 3B74133Q, AP4440371, PS3522743, 5F1CD0202S, 5F1CD2031S, 3B74133K. AH3522741, EA3522741, AP4438152, PS3522741. Compatibility: Compatible with appliances including but not limited to: GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04 Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0 Kenmore Microwaves: 721.62649200, 665.68612800 Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0 Whirlpool Dryers: WED5300SQ0 Balboa Spa Control Systems: 30123 Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 20A 250V slow-blow fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, LG, Samsung and other appliances requiring 6.35 x 32 mm, 20A 250V fuses. 🔥 Specifications: replacement slow-blow ceramic fuse, 6.35 x 32 mm (1/4" x 1-1/4"), 20A, 250V AC, ceramic body, time-delay, 3.35–3.5 mOhms resistance, cylindrical, holder/clip mount. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes. 🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and spa systems. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

20A Slow-Blow Ceramic Line Fuse 6.35 x 32 mm, 20A 250V - Compatible with GE, Whirlpool, Kenmore, Frigidaire and Other Appliances Product Description Protect your appliances with the replacement 20A Slow-Blow Ceramic Fuse 6.35 x 32 mm, 20A 250V. This high-quality time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances like microwaves, washers, dryers, and spa control systems. With a ceramic body for durability and heat resistance, this fuse (6.35 x 32 mm, 20A, 250V AC) safeguards circuits from over current and short circuits while tolerating brief surges. It addresses issues like appliance failure, power loss, or blown fuses.  Note: Includes one ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements. Replaces part numbers: MDA-20, 0326020.HXP, 0326020.MXDP, BK1-MDP-20-R, BK-MDP-V-20-R, GSA20, 8020.0605, 8020.0605.G, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WP4375321, W11305892, W11305905, AP6009296, PS11742452, 3601-001198, AP4046006, PS4131369, 5F1CD2031S, AP4565040, 1206681, 4922155, WB27X11151, AP4980434, PS3486702, WB27X11151, AP4980434, PS3486702, WB27X25389, PD00051885, EAP11773885, AP6040660, 4465042, PS11773885. Compatibility: Compatible with appliances including but not limited to: GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04 Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0 Kenmore Microwaves: 721.62649200, 665.68612800 Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0 Whirlpool Dryers: WED5300SQ0 Balboa Spa Control Systems: 30123 Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 20A 250V slow-blow fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, Balboa, and other appliances requiring 6.35 x 32 mm, 20A 250V fuses. 🔥 Specifications: replacement slow-blow ceramic fuse, 6.35 x 32 mm (1/4" x 1-1/4"), 20A, 250V AC, ceramic body, time-delay, 3.35–3.5 mOhms resistance, cylindrical, holder/clip mount. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes. 🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and spa systems. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

(2 Pack) 20A Ceramic Fuse 6.35 x 32 mm, 20A 250V - Compatible with GE, Whirlpool, Kenmore, Maytag, Frigidaire, LG, Samsung and Other Appliances Product Description Protect your appliances with the replacement 20A Slow-Blow Ceramic Fuse 6.35 x 32 mm, 20A 250V. This high-quality time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances like microwaves, washers, dryers, and spa control systems. With a ceramic body for durability and heat resistance, this fuse (6.35 x 32 mm, 20A, 250V AC) safeguards circuits from over current and short circuits while tolerating brief surges. It addresses issues like appliance failure, power loss, or blown fuses.  Note: Includes one ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements. Replaces part numbers: EXP20A, MDA-20, 0326020.HXP, 0326020.MXDP, BK1-MDP-20-R, BK-MDP-V-20-R, GSA20, 8020.0605, 8020.0605.G, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WP4375321, W11305892, W11305905, AP6009296, PS11742452, 3601-001198, AP4046006, PS4131369, 5F1CD2031S, AP4565040, 1206681, 4922155, WB27X11151, AP4980434, PS3486702, WB27X11151, AP4980434, PS3486702, WB2X3910, PS242167, AP2010811, WB2X3910, WB27X995, WB27X945, B27X10388, PS239525, AP2631556, WP8183507, 8183507, PS11745084, AP6011884, M0805101, AP6014669, PS11747931, WPM0805101, 5304423383, PS472662, AP2151673, EA472662, WB27X10928, AP3994062, WB27X10388, AH1481237, EA1481237, PS1481237, W11707984, W10138793, AP7225218, PS17629444, 3B74133Q, AP4440371, PS3522743, 5F1CD0202S, 5F1CD2031S, 3B74133K. AH3522741, EA3522741, AP4438152, PS3522741. Compatibility: Compatible with appliances including but not limited to: GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04 Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0 Kenmore Microwaves: 721.62649200, 665.68612800 Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0 Whirlpool Dryers: WED5300SQ0 Balboa Spa Control Systems: 30123 Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 20A 250V slow-blow fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, LG, Samsung and other appliances requiring 6.35 x 32 mm, 20A 250V fuses. 🔥 Specifications: replacement slow-blow ceramic fuse, 6.35 x 32 mm (1/4" x 1-1/4"), 20A, 250V AC, ceramic body, time-delay, 3.35–3.5 mOhms resistance, cylindrical, holder/clip mount. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes. 🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and spa systems. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO EXP20AG Glass Line Fuse, Fast Blow, 20A The XPARTCO EXP20AG is an aftermarket replacement fast-blow glass line fuse rated 20A at 250V, used as the primary overcurrent protection component in microwaves and a range of other household appliances. A line fuse sits directly in the incoming power path: as long as current draw stays within its rating, it does nothing at all, but the instant a short circuit or an overcurrent condition pushes current past 20A, the thin wire element inside the fuse melts and opens the circuit — sacrificing itself to protect the more expensive components downstream, like a transformer, magnetron, or control board. A blown fuse is why an appliance can go from working normally to completely dead with no lights, no display, and no response to any button. This is a standard-dimension glass cartridge fuse measuring 6mm x 30mm, fast-blow (fast-acting) rated, so it opens quickly once its rating is exceeded rather than tolerating a brief surge the way a slow-blow fuse would. It is commonly used across GE, Frigidaire, Whirlpool, Kenmore, and other brands' microwaves, and also turns up in HVAC control boards and various small appliances that use this same standard fuse size and rating. A fuse itself does not wear out from age the way a mechanical part does — if one has blown, it is a symptom of an overcurrent event somewhere else in the appliance, and it's worth understanding why before simply swapping in a new one. Quick Answer The XPARTCO EXP20AG Glass Line Fuse fixes microwaves and other appliances that have gone completely dead — no lights, no display, no response to any button. Fast-blow, 20A, 250V, standard glass cartridge, 6mm x 30mm. Commonly used across GE, Frigidaire, Whirlpool, and Kenmore microwaves and other appliances requiring this fuse size and rating. If a new fuse blows again right away, don't just keep replacing it — that almost always means there's an underlying short circuit that needs to be diagnosed first. Common Problems This Part Fixes Microwave completely dead — no display, no lights, no response to any button Appliance suddenly stopped working with no warning Microwave won't start even though the outlet has power HVAC control board or other appliance electronics unresponsive Appliance tripped off after a power surge or brownout Visible blown or darkened fuse when inspected against a light Continuity test shows an open circuit across the old fuse Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This glass line fuse directly replaces the following OEM and cross-reference part numbers: EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, 5304464087 Because this is a standard fuse size and rating rather than a brand-specific component, the exact OEM part number your appliance's manual references will vary. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This fuse is compatible with select appliances from the following brands that use a standard 20A, 250V, fast-blow 6mm x 30mm glass cartridge fuse: GE and Hotpoint microwaves (select models) Frigidaire microwaves (select models) Whirlpool and Kenmore microwaves (select models) KitchenAid, Maytag, and Amana microwaves (select models) Select HVAC control boards and other electronics using this fuse size and rating Note — glass vs. ceramic body: This is the glass-body EXP20AG fuse. A visually similar ceramic-body fuse (commonly labeled EXP20A) is also widely sold at the same 20A/250V rating for many of the same appliances. Check which body material your appliance's original fuse used before ordering, and always match the amperage and voltage rating exactly — never substitute a higher-amperage fuse "to stop it from blowing," since that removes the very protection the fuse is designed to provide. Contact our support team with your model number if you're unsure which fuse your appliance needs. Key Features Aftermarket replacement fast-blow glass line fuse — primary overcurrent protection for the appliance's incoming power circuit Rated 20A at 250V, standard 6mm x 30mm glass cartridge dimensions Fast-blow (fast-acting) design opens quickly once the rated current is exceeded Resolves "completely dead," "no display," and "no response to any button" symptoms caused by a blown line fuse Fits standard fuse holders/clips used across a wide range of microwaves and other appliances Replaces EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, and 5304464087 Compatible with GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances requiring this fuse size and rating Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number EXP20AG OEM Part Number Varies by brand/model — see Replaces Part Numbers Part Type Glass Line Fuse (Overcurrent Protection) Condition Aftermarket Replacement Amperage 20A Voltage 250V Response Speed Fast-blow (fast-acting) Body Material Glass Fuse Size 6mm x 30mm Application Microwaves and select other household appliances / HVAC controls Quantity 1 fuse Compatible Brands GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, Amana Installation Notes ⚠️ Danger — Microwave High-Voltage Capacitor If you are replacing this fuse in a microwave, be aware that microwaves contain a high-voltage capacitor that can store a dangerous electrical charge even after the unit has been unplugged. Never open a microwave's cabinet without first discharging the capacitor using an insulated screwdriver shorted across its terminals, and never touch the capacitor or its terminals directly. If you are not fully comfortable with this step, have a qualified appliance technician perform the fuse replacement instead. ⚠️ Unplug The Appliance Before Starting — Match Amperage And Voltage Exactly Disconnect power at the outlet or shut off the circuit breaker before beginning. Locate the fuse holder — on most microwaves this is accessible after removing the outer cabinet, often near the incoming power cord or the control board. Remove the old fuse from its clip or holder and inspect it: a blown fast-blow fuse often shows a visibly darkened or broken filament, or a scorched glass body. Test with a multimeter set to continuity if the fuse looks intact but you suspect it's still bad — a good fuse shows continuity end to end, a blown one shows none. Install the new EXP20AG fuse in the same holder, making sure the amperage and voltage rating match your appliance's original fuse exactly. Reassemble the cabinet, restore power, and test the appliance. Tools needed: Phillips screwdriver, insulated screwdriver (for microwave capacitor discharge), multimeter (recommended), work gloves. Frequently Asked Questions I replaced the fuse and it blew again right away. What's going on? A fuse doesn't fail on its own from age — it blows because something downstream drew more current than it should have. If the new fuse blows again immediately, that's a strong sign of an underlying short circuit or a failing component such as the transformer, magnetron, or a shorted capacitor. Continuing to replace the fuse without finding that root cause will just keep blowing new fuses, and in a microwave specifically, that diagnosis involves working near a high-voltage capacitor that should only be handled by someone comfortable discharging it safely, or by a qualified technician. Can I use a higher-amperage fuse if this one keeps blowing? No — this is one of the most important things to avoid with any fuse. The fuse's rating is chosen specifically to protect the wiring and components in the circuit it sits in. Installing a higher-amperage fuse "so it stops blowing" removes that protection and can allow a fault to overheat wiring or damage expensive components (or start a fire) instead of safely interrupting the circuit. Always replace a fuse with the same amperage and voltage rating as the original. How do I know if the fuse is actually blown? Visually, a blown fast-blow fuse often shows a broken or darkened filament inside the glass body, or scorching on the glass itself. If it looks fine but you still suspect it, the reliable way to check is with a multimeter set to continuity (with the appliance unplugged and the fuse removed from the circuit) — a good fuse reads continuity end to end, while a blown fuse reads open with no continuity at all. Is EXP20AG the same as EXP20A? They share the same 20A/250V rating, but EXP20AG refers to the glass-body version of this fuse while EXP20A commonly refers to a ceramic-body version sold for many of the same appliances. Check which body material your appliance's original fuse used, and if you're not sure, contact our support team with your model number for confirmation. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine brand-specific OEM part, but is manufactured to the same standard 20A, 250V, fast-blow glass cartridge dimensions and rating used across the OEM fuses in compatible GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm Product Description Protect your appliances with the replacement 30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm. This high-quality, fast-acting ceramic cartridge fuse is designed to safeguard circuits in appliances like microwaves, dryers, and HVAC systems by interrupting power during over-current events. With a 30A current rating, 250VAC/125VDC voltage rating, and compact 3AB/3AG (6.35 x 32 mm) size, it offers reliable protection for high-power loads. Constructed with a durable ceramic body for high interrupting ratings, this fuse ensures safety and performance. Note: Includes one fast-blow ceramic fuse; disconnect power before installation. Check appliance manual for compatibility. Replaces part numbers: ABC-30, BK/ABC-30, 0ADEC9300-BE, 0314030.MX52LP, BK-AHC-30-R, BK-AHCF-V-30-R Compatibility: Compatible with appliances including but not limited to: Microwaves: Select GE, Samsung, LG models requiring 30A, 250V fast-blow fuses. Dryers: GE Hotpoint models (e.g., compatible with WE1X21975 assemblies). HVAC Systems: Units using 3AB/3AG 6.35 x 32 mm fast-acting fuses. Other Appliances: Power strips, audio amplifiers, and industrial equipment requiring 30A protection. Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Samsung, LG, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement ceramic fuse, 30A, 250VAC/125VDC, fast-blow, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, 10kA interrupting rating at 125VAC, 3.7 mOhms resistance, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower cost. 🛠️ Easy Installation: Requires fuse holder or clip; typically installed in 5–10 minutes with basic tools. 🛡️ Reliable Fixes: Protects circuits from over-current, preventing appliance damage or failure. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your appliances run safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO EXP20AG - 5 Pack Glass Line Fuse, Fast Blow, 20A The XPARTCO (5 Pack) EXP20AG is an aftermarket replacement fast-blow glass line fuse rated 20A at 250V, used as the primary overcurrent protection component in microwaves and a range of other household appliances. A line fuse sits directly in the incoming power path: as long as current draw stays within its rating, it does nothing at all, but the instant a short circuit or an overcurrent condition pushes current past 20A, the thin wire element inside the fuse melts and opens the circuit — sacrificing itself to protect the more expensive components downstream, like a transformer, magnetron, or control board. A blown fuse is why an appliance can go from working normally to completely dead with no lights, no display, and no response to any button. This is a standard-dimension glass cartridge fuse measuring 6mm x 30mm, fast-blow (fast-acting) rated, so it opens quickly once its rating is exceeded rather than tolerating a brief surge the way a slow-blow fuse would. It is commonly used across GE, Frigidaire, Whirlpool, Kenmore, and other brands' microwaves, and also turns up in HVAC control boards and various small appliances that use this same standard fuse size and rating. A fuse itself does not wear out from age the way a mechanical part does — if one has blown, it is a symptom of an overcurrent event somewhere else in the appliance, and it's worth understanding why before simply swapping in a new one. Quick Answer The XPARTCO EXP20AG Glass Line Fuse fixes microwaves and other appliances that have gone completely dead — no lights, no display, no response to any button. Fast-blow, 20A, 250V, standard glass cartridge, 6mm x 30mm. Commonly used across GE, Frigidaire, Whirlpool, and Kenmore microwaves and other appliances requiring this fuse size and rating. If a new fuse blows again right away, don't just keep replacing it — that almost always means there's an underlying short circuit that needs to be diagnosed first. Common Problems This Part Fixes Microwave completely dead — no display, no lights, no response to any button Appliance suddenly stopped working with no warning Microwave won't start even though the outlet has power HVAC control board or other appliance electronics unresponsive Appliance tripped off after a power surge or brownout Visible blown or darkened fuse when inspected against a light Continuity test shows an open circuit across the old fuse Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This glass line fuse directly replaces the following OEM and cross-reference part numbers: EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, 5304464087 Because this is a standard fuse size and rating rather than a brand-specific component, the exact OEM part number your appliance's manual references will vary. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This fuse is compatible with select appliances from the following brands that use a standard 20A, 250V, fast-blow 6mm x 30mm glass cartridge fuse: GE and Hotpoint microwaves (select models) Frigidaire microwaves (select models) Whirlpool and Kenmore microwaves (select models) KitchenAid, Maytag, and Amana microwaves (select models) Select HVAC control boards and other electronics using this fuse size and rating Note — glass vs. ceramic body: This is the glass-body EXP20AG fuse. A visually similar ceramic-body fuse (commonly labeled EXP20A) is also widely sold at the same 20A/250V rating for many of the same appliances. Check which body material your appliance's original fuse used before ordering, and always match the amperage and voltage rating exactly — never substitute a higher-amperage fuse "to stop it from blowing," since that removes the very protection the fuse is designed to provide. Contact our support team with your model number if you're unsure which fuse your appliance needs. Key Features Aftermarket replacement fast-blow glass line fuse — primary overcurrent protection for the appliance's incoming power circuit Rated 20A at 250V, standard 6mm x 30mm glass cartridge dimensions Fast-blow (fast-acting) design opens quickly once the rated current is exceeded Resolves "completely dead," "no display," and "no response to any button" symptoms caused by a blown line fuse Fits standard fuse holders/clips used across a wide range of microwaves and other appliances Replaces EXP20AG, AGC20, GMA20, 20AG, 5304509451, AP6230606, PS12071294, 5304488359, AP5648907, PS5136235, and 5304464087 Compatible with GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances requiring this fuse size and rating Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number EXP20AG-5PK OEM Part Number Varies by brand/model — see Replaces Part Numbers Part Type Glass Line Fuse (Overcurrent Protection) Condition Aftermarket Replacement Amperage 20A Voltage 250V Response Speed Fast-blow (fast-acting) Body Material Glass Fuse Size 6mm x 30mm Application Microwaves and select other household appliances / HVAC controls Quantity 1 fuse Compatible Brands GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, Amana Installation Notes ⚠️ Danger — Microwave High-Voltage Capacitor If you are replacing this fuse in a microwave, be aware that microwaves contain a high-voltage capacitor that can store a dangerous electrical charge even after the unit has been unplugged. Never open a microwave's cabinet without first discharging the capacitor using an insulated screwdriver shorted across its terminals, and never touch the capacitor or its terminals directly. If you are not fully comfortable with this step, have a qualified appliance technician perform the fuse replacement instead. ⚠️ Unplug The Appliance Before Starting — Match Amperage And Voltage Exactly Disconnect power at the outlet or shut off the circuit breaker before beginning. Locate the fuse holder — on most microwaves this is accessible after removing the outer cabinet, often near the incoming power cord or the control board. Remove the old fuse from its clip or holder and inspect it: a blown fast-blow fuse often shows a visibly darkened or broken filament, or a scorched glass body. Test with a multimeter set to continuity if the fuse looks intact but you suspect it's still bad — a good fuse shows continuity end to end, a blown one shows none. Install the new EXP20AG fuse in the same holder, making sure the amperage and voltage rating match your appliance's original fuse exactly. Reassemble the cabinet, restore power, and test the appliance. Tools needed: Phillips screwdriver, insulated screwdriver (for microwave capacitor discharge), multimeter (recommended), work gloves. Frequently Asked Questions I replaced the fuse and it blew again right away. What's going on? A fuse doesn't fail on its own from age — it blows because something downstream drew more current than it should have. If the new fuse blows again immediately, that's a strong sign of an underlying short circuit or a failing component such as the transformer, magnetron, or a shorted capacitor. Continuing to replace the fuse without finding that root cause will just keep blowing new fuses, and in a microwave specifically, that diagnosis involves working near a high-voltage capacitor that should only be handled by someone comfortable discharging it safely, or by a qualified technician. Can I use a higher-amperage fuse if this one keeps blowing? No — this is one of the most important things to avoid with any fuse. The fuse's rating is chosen specifically to protect the wiring and components in the circuit it sits in. Installing a higher-amperage fuse "so it stops blowing" removes that protection and can allow a fault to overheat wiring or damage expensive components (or start a fire) instead of safely interrupting the circuit. Always replace a fuse with the same amperage and voltage rating as the original. How do I know if the fuse is actually blown? Visually, a blown fast-blow fuse often shows a broken or darkened filament inside the glass body, or scorching on the glass itself. If it looks fine but you still suspect it, the reliable way to check is with a multimeter set to continuity (with the appliance unplugged and the fuse removed from the circuit) — a good fuse reads continuity end to end, while a blown fuse reads open with no continuity at all. Is EXP20AG the same as EXP20A? They share the same 20A/250V rating, but EXP20AG refers to the glass-body version of this fuse while EXP20A commonly refers to a ceramic-body version sold for many of the same appliances. Check which body material your appliance's original fuse used, and if you're not sure, contact our support team with your model number for confirmation. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine brand-specific OEM part, but is manufactured to the same standard 20A, 250V, fast-blow glass cartridge dimensions and rating used across the OEM fuses in compatible GE, Frigidaire, Whirlpool, Kenmore, KitchenAid, Maytag, and Amana appliances. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

(5 Pack) EXP25A Ceramic Line Fuse, Fast Blow,  25A, 250V  It can be used in many applications.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm Product Description Protect your appliances with the replacement 30A Ceramic Line Fuse, Fast Blow, 6.35 x 32 mm. This high-quality, fast-acting ceramic cartridge fuse is designed to safeguard circuits in appliances like microwaves, dryers, and HVAC systems by interrupting power during over-current events. With a 30A current rating, 250VAC/125VDC voltage rating, and compact 3AB/3AG (6.35 x 32 mm) size, it offers reliable protection for high-power loads. Constructed with a durable ceramic body for high interrupting ratings, this fuse ensures safety and performance. Note: Includes one fast-blow ceramic fuse; disconnect power before installation. Check appliance manual for compatibility. Replaces part numbers: ABC-30, BK/ABC-30, 0ADEC9300-BE, 0314030.MX52LP, BK-AHC-30-R, BK-AHCF-V-30-R Compatibility: Compatible with appliances including but not limited to: Microwaves: Select GE, Samsung, LG models requiring 30A, 250V fast-blow fuses. Dryers: GE Hotpoint models (e.g., compatible with WE1X21975 assemblies). HVAC Systems: Units using 3AB/3AG 6.35 x 32 mm fast-acting fuses. Other Appliances: Power strips, audio amplifiers, and industrial equipment requiring 30A protection. Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Samsung, LG, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement ceramic fuse, 30A, 250VAC/125VDC, fast-blow, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, 10kA interrupting rating at 125VAC, 3.7 mOhms resistance, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower cost. 🛠️ Easy Installation: Requires fuse holder or clip; typically installed in 5–10 minutes with basic tools. 🛡️ Reliable Fixes: Protects circuits from over-current, preventing appliance damage or failure. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your appliances run safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less

(20 Pack) 15A Slow-Blow Ceramic Line Fuse, 6.35 x 32 mm, 15A 250V - Compatible with GE, Whirlpool, Kenmore, and Other Appliances Product Description Safeguard your appliances with the replacement 15A Slow-Blow Ceramic Line Fuse, 6.35 x 32 mm, 15A 250V. This high-quality, time-delay (slow-blow) ceramic cartridge fuse is designed for GE, Whirlpool, Kenmore, and other appliances such as microwaves, washers, dryers, and HVAC systems. With a durable ceramic body, this fuse (6.35 x 32 mm, 15A, 250VAC/125VDC) protects circuits from over-current and short circuits while handling brief surges, ensuring reliable performance. Note: Includes one slow-blow ceramic fuse. Disconnect power before installation. Verify fuse size and rating match your appliance’s requirements. Replaces part numbers: WB27X7, 14QBP15CFB, AP2626454, PS240270, WPM0805102, AP6014670, PS4131368, M0805102, MDA-15, 0326015.HXP, 0326015.MXDP, BK1-MDP-15-R, BK-MDP-V-15-R, WB27X10388, AP3094537, AH334641, EA334641, EAP334641, PS334641, WB27X10454, AP3189379, PS239596 Compatibility: Compatible with appliances including but not limited to: GE Microwaves: JE1860SH04, JVM1540SM5SS, JVM1440WH04 Whirlpool Microwaves: MH1150XMQ0, MH2175XSB0 Kenmore Microwaves: 721.62649200, 665.68612800 Whirlpool Washers: WTW5300SQ0, LSQ9544KQ0 Whirlpool Dryers: WED5300SQ0 Other Brands: KitchenAid, Maytag, Amana, Hotpoint, and other appliances requiring 6.35 x 32 mm, 15A 250V slow-blow fuses Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Hotpoint, and other appliances using 3AB/3AG fuses. 🔥 Specifications: replacement slow-blow ceramic fuse, 15A, 250VAC/125VDC, 6.35 x 32 mm (1/4" x 1-1/4"), ceramic body, time-delay, 4.5 mOhms resistance, 10kA interrupting rating at 125VAC, UL Listed, RoHS compliant. 💰 Cost-Effective Alternative: replacement fuse offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires insulated gloves, needle-nose pliers; typically installed in 5–15 minutes. 🛡️ Reliable Fixes: Resolves appliance failure, power loss, or blown fuse issues in microwaves, washers, dryers, and HVAC systems. Installation Notes: Safety First: Disconnect the appliance from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your appliances running safely and efficiently today! Add to cart now for a budget-friendly fix!

Read more less