Search results for "drum bearings"

WE03X23956 Dryer Genuine OEM Drum Bearing Front Top Support – Compatible with GE & Hotpoint Dryers Product Description Restore smooth drum rotation and reduce noise with the WE03X23956 Dryer Genuine OEM Drum Bearing Front Top Support. This factory-approved component supports the front of the dryer drum, allowing it to glide smoothly during operation. A worn or damaged bearing support can cause scraping, squealing, thumping noises, or excessive vibration. Replacing it with this Genuine OEM part ensures proper alignment, quiet performance, and long-lasting durability. Replaces Part Numbers WE03X23956, 4467012, PD00046507, EAP11736622, AP6004448, PS11736622. Compatibility This Genuine OEM drum bearing front top support fits select GE and Hotpoint dryers. Example compatible models include (but are not limited to):GE GTD33EASK0WW, GTD42EASJ2WW, GTD45EASJ2WSHotpoint HTDX100EM8WW, HTDX100ED6WW Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and reliable performance 🔄 Smooth Drum Support – Allows proper drum rotation and alignment 🔇 Noise Reduction – Eliminates scraping, squealing, or thumping sounds 💪 Durable Construction – Built with OEM-grade materials for long service life 🛡️ Fixes Common Issues – Resolves noisy operation, drum drag, or uneven tumbling 📐 Product Specification Part Number: WE03X23956 Component Type: Dryer Drum Bearing / Front Top Support Material: OEM-grade plastic with integrated bearing surface Location: Front upper drum support Mounting: Secured to dryer front panel Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock. Steps: Disconnect power and remove the dryer top and front panels. Lift the drum slightly to access the front bearing support. Remove the worn bearing/top support. Install the new WE03X23956 support in the same position. Reassemble panels and ensure drum is properly seated. Restore power and run a test cycle. ⏱️ Time Required: 30–45 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore quiet, smooth dryer operation — Add to Cart Now for a factory-quality repair!

Read more less

12238200001084 Genuine OEM Midea Dryer Bearing House Assembly (Drum Rear Bearing) The 12238200001084 is a Genuine OEM Midea replacement bearing house assembly compatible with select Midea, Criterion, and Insignia electric and gas dryers, including the CDE41N1AW series. The bearing house assembly is mounted at the rear of the drum and houses the bearing that the rear drum shaft rotates within, supporting the back of the drum and allowing it to spin smoothly. Unlike front-mounted slide rollers used on some dryer platforms, this Midea design uses a rear bearing housing assembly to carry the load at the back of the drum. When the bearing house assembly wears out — typically from age, lack of lubrication, or accumulated lint and debris — the drum no longer spins smoothly on its rear support, resulting in grinding, rumbling, or squealing noise, increased drum drag, and in advanced cases, visible wobble or binding of the drum during rotation. As a Genuine OEM part manufactured by Midea to factory specifications, the 12238200001084 is a complete bearing house assembly designed as a direct replacement for the original equipment component. Installs in 45–60 minutes with basic hand tools, as drum removal is required. Quick Answer The 12238200001084 Genuine OEM Midea Dryer Bearing House Assembly fixes Midea, Criterion, and Insignia dryers with grinding, rumbling, or squealing noise from the rear of the drum, increased drum drag, or visible drum wobble. Mounted at the rear of the drum — houses the bearing the rear drum shaft rotates within. Genuine OEM. Compatible with Midea CDE41N1AW and related Midea electric dryer platform models. Requires drum removal to access — a more involved repair than a front roller swap. Common Problems This Part Fixes Loud grinding or rumbling noise from the rear of the drum during the drying cycle Squealing or squeaking noise as the drum rotates — worn or dry bearing surface Increased drag or resistance felt when manually rotating the drum by hand Drum wobbling or binding during rotation — worn bearing no longer providing stable support Excessive vibration during the drying cycle Visible wear, cracking, or lint/debris buildup in the bearing house area Drum scraping against the rear bulkhead due to lost bearing support Replaces Part Numbers This bearing house assembly directly replaces the following part number: 12238200001084, AP7154967, PS18167713 This is the Midea manufacturer part number used across the compatible Midea, Criterion, and Insignia dryer platform. Contact our support team with your model number if you need confirmation before ordering. Compatibility This bearing house assembly is compatible with select Midea, Criterion, and Insignia dryers, including: Midea CDE41N1AW electric dryer Midea MLE series electric dryers (select models — same drum/bearing platform) Criterion electric dryers built on the Midea platform (select models) Insignia electric dryers built on the Midea platform (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance Complete bearing house assembly — supports the rear of the drum and allows smooth, quiet rotation Houses the bearing that the rear drum shaft rotates within — a sealed-style design intended to resist lint intrusion Direct replacement for the original equipment bearing house assembly Compatible with Midea CDE41N1AW and related Midea, Criterion, and Insignia electric dryer platform models Installs in 45–60 minutes with basic hand tools (drum removal required) Product Specifications Part Number 12238200001084 Part Type Dryer Bearing House Assembly (Drum Rear Bearing) Condition Genuine OEM Application Electric Dryers (Midea platform) Location Rear of drum — houses rear drum shaft bearing Compatible Brands Midea, Criterion, Insignia Installation Notes ⚠️ Unplug Dryer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves — there are sharp sheet metal edges inside the dryer cabinet. Remove the lint filter housing screws, release the top panel locking clips with a putty knife, and lift the top panel. Remove the front panel to access the drum. Take a photo of the belt routing before disconnecting the drive belt from the idler pulley. Carefully lift the drum out of the cabinet and set it aside on a padded surface. Locate the bearing house assembly mounted at the rear bulkhead where the drum's rear shaft was seated. Remove the mounting screws or clips securing the old bearing house assembly and pull it free. Clean any accumulated lint or debris from the mounting area before installing the new part. Install the new 12238200001084 bearing house assembly in the same position and secure the mounting hardware. Reinstall the drum, re-route and reconnect the drive belt, and reassemble the front and top panels. Restore power and run a test cycle to confirm the drum rotates smoothly and quietly. Tools needed: Phillips screwdriver, putty knife, work gloves. Frequently Asked Questions What does the bearing house assembly do? The bearing house assembly is mounted at the rear bulkhead of the dryer and houses the bearing that the rear drum shaft rotates within. It supports the back of the drum as it spins, allowing smooth, low-friction rotation throughout the drying cycle. Unlike dryer platforms that use front-mounted slide rollers or felt seals for drum support, this Midea design relies on a dedicated rear bearing housing to carry the structural load at the back of the drum. As the bearing wears, friction increases, leading to noise, drag, and eventually wobble or binding if left unaddressed. How do I know if the bearing house assembly has failed versus another component? A grinding, rumbling, or squealing noise specifically tied to drum rotation — rather than the blower motor or idler pulley — and noise that changes pitch as the drum speeds up or slows down often points to the rear bearing. With the dryer unplugged and the drum exposed (front panel removed), try rotating the drum by hand: if you feel noticeable resistance, grinding, or grittiness compared to a smooth, free rotation, the bearing house assembly has likely worn out and needs replacement. Why does this repair require removing the drum? The bearing house assembly is mounted at the rear bulkhead behind the drum, supporting the drum's rear shaft from the inside. There is no way to access this component without first removing the front panel and lifting the drum out of the cabinet. This makes it a more involved repair than swapping a front-accessible part like a belt or idler pulley, but it follows the same general dryer disassembly procedure used for accessing other internal drum components. Should I inspect other components while the drum is out? Yes — since the drum must already be removed to access the bearing house assembly, this is an excellent opportunity to inspect the drive belt, idler pulley, and any felt seals or gaskets around the drum opening for wear. Components in this drum drive system tend to wear together, and addressing multiple worn parts in a single repair session helps avoid a near-term repeat teardown. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same bearing house assembly installed in compatible Midea, Criterion, and Insignia electric dryers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM WE03X23875 Dryer Drum Bearing Support - Compatible with GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel Dryers Product Description Keep your dryer running smoothly with the Genuine OEM WE03X23875 Dryer Drum Bearing Support from Parts-O-Matic. This authentic GE front drum support assembly, designed for GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel dryers, secures the drum at the front, ensuring smooth rotation during the drying cycle. Made of durable gray plastic, it includes bearings and a light fixture, addressing issues like squeaking, grinding noises, loose drum movement, or reduced drying efficiency caused by wear or damage. Note: Includes one front drum support assembly with bearings and light. Clean lint and debris from the drum and front panel before installation. Take photos of component placement during disassembly. Replaces part numbers: WE03X23875, EAP11767002, PD00050010, AP6037232, 4587455, PS11767002. Compatibility: Compatible with models including but not limited to: GE: GTD65EBSJ1WS, GTD65GBSJ0WS, GTD72GBPNDG, GTD84GCSNWS, GTD42EASJ0WW, GTDP490ED7WS Hotpoint: HTDX100EM8WW, HTDP120ED6WW RCA: RTD42EASJ0WW Kenmore: 2661532210, 36361532412 Fisher & Paykel: DG70FA1-96975, DE60FA-US1-96987 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel dryer models. 🔥 Specifications: OEM front drum support assembly, gray plastic, includes bearings and light fixture, designed for smooth drum rotation and durability. 💰 Genuine OEM Quality: Authentic GE part ensures perfect fit and reliable performance. 🛠️ Easy Installation: Requires a Phillips screwdriver, nut driver, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves squeaking or grinding noises, loose or sagging drum, reduced drying efficiency, or unusual noises when opening/closing the door. Installation Notes: Safety First: Unplug the dryer from the power source before installation. Shop Parts-O-Matic for high-quality OEM appliance parts with a 30-day return policy. Keep your dryer running smoothly and efficiently today! Add to cart now for a reliable OEM fix!

Read more less

WE3X75 Dryer Genuine OEM Rear Drum Bearing Sleeve Replaces Part Numbers:WE3X75, 3410, AH267865, AP2042531, DE726, EA267865, PS267865, WE03X0037, WE03X0072, WE03X0074, WE03X0075, WE3X37, WE3X37R, WE3X72, WE3X72R, WE3X74, WE3X74R   California Residents only WARNING: California’s Proposition 65

Read more less

5303281153 Dryer Genuine OEM Rear Drum Bearing The 5303281153 is a genuine Frigidaire OEM rear drum bearing kit for Frigidaire dryers, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse models. This ball-and-socket style bearing supports the rear of the dryer drum, reducing friction and allowing the drum to rotate smoothly and quietly throughout the drying cycle. The bearing itself measures approximately 1-15/16"L x 1"W x 1-3/8"H, with mounting holes 1-1/2" apart, center to center. The holes in the metal mounting plate are not pre-threaded — the self-tapping screws included in the kit are what create the threads during installation. Common causes of failure include normal wear and tear, exposure to excessive heat or lint buildup, or physical damage from impact or overloading. Symptoms of a worn or failing rear drum bearing include excessive noise or grinding sounds, difficulty rotating the drum or a drum that won't turn at all, visible wear or damage on the bearing, or increased vibration and shaking during the drying cycle. It directly replaces AP2142648, 1851, 3281153, 5304459240, 85-852, AH459829, DE724, EA459829, PS459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 175428, 175432, 175433, 31581400, 3281019, 3281020, 5303281019, and 5303281020. Quick Answer The 5303281153 Dryer Genuine OEM Rear Drum Bearing fixes Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse dryers with excessive noise or grinding, a drum that won't turn or turns with difficulty, or increased vibration. Ball-and-socket style, ~1-15/16"L x 1"W x 1-3/8"H. Replaces AP2142648, 1851, 3281153, 5304459240, 85-852, AH459829, DE724, EA459829, PS459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 175428, 175432, 175433, 31581400, 3281019, 3281020, 5303281019, 5303281020. The mounting plate holes aren't pre-threaded — the included self-tapping screws create the threads as you install them, so take your time getting them started straight. What's In The Kit Component Function Ball Shaft (131777700) The shaft the drum rotates on at the rear support point. Teflon Shaft Bearing (131825900) Reduces friction between the shaft and its bracket. Shaft Bearing Bracket (131724301) Mounts the bearing assembly to the rear bulkhead. Ball Bearing (5303281019) & Clip (5303281020) Supports the ball shaft and secures it in place. Mounting Screws & Washers Self-tapping screws (3 for the shaft, 2 for the bracket) that thread into the unthreaded metal plate. High-Temperature Lubricant Tube Lubricates the bearing assembly for quiet, smooth operation. Common Problems This Kit Fixes Excessive noise or grinding sounds from the rear of the dryer Drum won't turn, or turns with difficulty Visible wear or damage on the existing bearing Increased vibration or shaking during the drying cycle Loud squealing when the dryer runs Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer rear drum bearing kit directly replaces the following OEM and cross-reference part numbers: 5303281153, 1851, 3281153, 5304459240, 85-852, AH459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 3281019, 3281020, 5303281009, 5303286875, 8015113, 8015324, 902088, Q000022224, Q000500537, WQ22224, WQ500537, AFR17081, AP2142648, DE724, EA459829, EAP459829, PD00000097, PS459829 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This rear drum bearing kit is compatible with select Frigidaire dryers, and also fits select Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse dryers built on the Frigidaire platform. Note: This kit is commonly purchased alongside a drum belt (such as our 137292700 listing), since both are accessed through the same disassembly and often wear on a similar timeline. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Frigidaire OEM part — complete rear drum bearing kit in one purchase Resolves "excessive noise," "won't turn," "worn bearing," and "vibration" symptoms Ball-and-socket style bearing design Includes ball shaft, Teflon shaft bearing, bearing bracket, ball bearing and clip, mounting screws and washers, and a high-temperature lubricant tube Approximately 1-15/16"L x 1"W x 1-3/8"H, mounting holes 1-1/2" apart Replaces AP2142648, 1851, 3281153, 5304459240, 85-852, AH459829, DE724, EA459829, PS459829, Q000142850, Q142850, WQ142850, 08015113, 08015324, 131378400, 131777700, 137088600, 137088620, 137088630, 175428, 175432, 175433, 31581400, 3281019, 3281020, 5303281019, and 5303281020 Compatible with Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, and Westinghouse dryers Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 5303281153 Part Type Dryer Rear Drum Bearing Kit Condition Genuine OEM Brand Frigidaire Bearing Style Ball-and-socket Bearing Dimensions Approx. 1-15/16"L x 1"W x 1-3/8"H Mounting Hole Spacing 1-1/2" apart, center to center Mounting Plate Not pre-threaded — self-tapping screws included Includes Ball shaft, Teflon bearing, bracket, ball bearing + clip, screws, washers, high-temp lubricant Repair Difficulty Moderate Quantity 1 rear drum bearing kit Compatible Brands Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, Westinghouse Installation Notes ⚠️ Unplug Dryer Before Starting — Mounting Plate Holes Are Not Pre-Threaded Disconnect power at the outlet before beginning. Wear work gloves. Remove the back panel and the drum belt to access the drum, then remove the drum itself to reach the rear bearing assembly. While the dryer is open, take the time to clean out any accumulated lint from inside the cabinet and around the motor, since buildup here is common and worth clearing while you have access. Remove the old bearing bracket, ball shaft, and related hardware. Apply the included high-temperature lubricant to the new Teflon shaft bearing and ball bearing as directed. Assemble the new ball shaft, bearing, and bracket, then mount the bracket to the rear bulkhead. The holes in the metal mounting plate are not pre-threaded — use the self-tapping screws included in the kit to thread the plate as you install them. If the included screws feel blunt or don't bite well, threading with your original screws first and then switching to the new screws for final installation can help. Reinstall the drum, making sure it seats correctly on the new bearing. Reattach the drum belt and back panel, and double check that no leftover screws remain before closing everything up. Restore power and run a test cycle to confirm quiet, smooth drum rotation. Tools needed: nut driver, Phillips or square-drive screwdriver, work gloves. Frequently Asked Questions My dryer is making a loud grinding or squealing noise. Is this the part I need? Yes, this is one of the most common symptoms of a worn rear drum bearing. One customer described their dryer as no longer "talking back" after the repair — no more chatter or grinding — confirming this bearing was the source of the noise. Why does it matter that the mounting plate holes aren't pre-threaded? Since the plate isn't pre-threaded, the self-tapping screws included in the kit have to cut their own threads as you install them, which takes a bit more care than screwing into an already-threaded hole. One customer found the included screws were blunt and didn't tap easily, and got better results starting the threads with their original, sharper screws before switching to the new screws for the final installation. Should I clean anything else while I have the dryer open for this repair? Yes, it's worth it. One customer found their motor "completely embedded with lint and animal hair" during this repair and spent extra time cleaning it out. Since you'll already have the back panel and drum removed, this is a good opportunity to clear out accumulated lint throughout the cabinet. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original bearing style, dimensions, and hardware configuration of the rear drum bearing kit originally installed in your dryer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM WE03X37319 Dryer Drum Bearing Slide (White, 2-Pack) - Compatible with GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel Dryers Product Description Ensure smooth and quiet dryer operation with the Genuine OEM WE03X37319 Dryer Drum Bearing Slide (White, 2-Pack). These authentic GE drum bearing slides, designed for GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel dryers, support the drum’s front during rotation, reducing friction between the drum and front panel. Made of durable polytetrafluoroethylene (Teflon), these white slides fit the outer slots of the front bearing and prevent squeaking, grinding noises, or uneven drying caused by worn slides. Note: Includes two white bearing slides for the outer slots of the front bearing. Replace all slides (two white WE03X37319, two green WE03X37320) simultaneously for even wear. Clean lint and debris from the front panel and drum before installation. Take photos of slide placement during disassembly. Replaces part numbers: WE03X37319, WE3M51, WE01M0404, WE1M404, PD00088117, FIX17137207, EAP17137207, AP7217725, PS17137207. Compatibility: Compatible with models including but not limited to: GE: DBXR463ED1WW, DBXR463EG0WW, DBLR333EG0WW, GTD42EASJ0WW, GTD65EBSJ2WS, GFD45ESSM0WW Hotpoint: HTDX100EM8WW, HTDP120ED6WW RCA: RTD42EASJ0WW Kenmore: 2661532210, 2661532211, 36361532412, 2671532110 Fisher & Paykel: DG70FA1-96975, DE60FA-US1-96987 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel dryer models. 🔥 Specifications: OEM drum bearing slide, white, polytetrafluoroethylene (Teflon), 2-11/16"L x 5/8"W x 1/16"H, 2-pack, designed for smooth drum rotation and durability. 💰 Genuine OEM Quality: Authentic GE part ensures perfect fit and reliable performance. 🛠️ Easy Installation: Requires a Phillips screwdriver, nut driver, work gloves; typically installed in 15–60 minutes. 🛡️ Reliable Fixes: Resolves squeaking or grinding noises, loose or sagging drum, uneven drying, or marks on clothes. Installation Notes: Safety First: Unplug the dryer from the power source before installation. Shop Parts-O-Matic for high-quality OEM appliance parts with a 30-day return policy. Keep your dryer running smoothly and quietly today! Add to cart now for a reliable OEM fix!

Read more less

XPARTCO WE25X205 Dryer Drum Bearing The XPARTCO WE25X205 is an aftermarket replacement rear drum bearing kit for GE, Hotpoint, and Kenmore electric and gas dryers. The rear drum bearing supports the back of the drum and lets it turn smoothly and quietly as the belt drives it. When the bearing wears out, the drum starts to squeal, rumble, or grind while it turns, and a badly worn bearing can let the drum sit unevenly or scrape. This is a direct-fit aftermarket replacement for the original GE kit. GE's catalog lists WE25X205 as superseded to WE25M40, and this listing covers both numbers. Because the drum has to come out to reach the bearing, it is a good time to inspect the drum belt, idler pulley, and drum glides and replace any that look worn. Quick Answer The XPARTCO WE25X205 Dryer Drum Bearing fixes a GE, Hotpoint, or Kenmore dryer that squeals, rumbles, or grinds when the drum turns. It replaces the rear drum bearing and is also listed under WE25M40. Classic symptom: a loud squeal or rumble that follows the drum and is there with or without heat. Common Problems This Part Fixes Loud squealing or squeaking while the drum turns Rumbling or grinding noise from the back of the dryer Drum that wobbles, drags, or doesn't turn smoothly Excess vibration during a cycle Noise that continues even when the dryer is running without heat Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drum bearing kit directly replaces the following part numbers: WE25M40, WE25X205, 784658, WE01X0462, WE01X0463, WE02X0195, WE03M0015, WE03M0065, WE03X0022, WE03X0028, WE03X0031, WE03X0035, WE03X0036, WE03X0039, WE03X0065, WE11X0056, WE11X56, WE1X462, WE1X463, WE25M0040, WE25M40-25PK, WE25X0062, WE25X0205, WE25X205E, WE25X205R, WE25X62, WE25X62R, WE2X195, WE2X195D, WE3M15, WE3M65, WE3X22, WE3X28, WE3X31, WE3X35, WE3X36, WE3X39, WE3X65, AGE25888, AH267529, AP2619300, DE725, EA267529, EAP267529, PD00001078, PS267529, AFP1161113 These numbers span several generations of GE's own part numbering for this bearing kit. Older numbers beyond WE25X205 and WE25M40 are drawn from a retailer cross-reference, so confirm against your dryer's parts diagram or contact our support team if your model calls out a different number. Compatibility This bearing kit is listed for GE, Hotpoint, and Kenmore dryer models, including these examples: GE DDG9680RCM, DDG8580RCM, DDP1380GFM, DDE058DGAL, DDE8200GBL GE DHSR333GV0WB, DWXQ473T0WW, DPXR475EW0AA, DPXR475EW0WW, DPSR475EW0AA Note: The models above are a sample, not a full list. Retailers also reference this kit for some Fisher & Paykel dryers, which we could not confirm by model. Enter your model number at checkout or contact our support team to verify fit before ordering. Key Features Direct-fit aftermarket rear drum bearing kit for GE-built dryers Restores smooth, quiet drum rotation Covers both WE25X205 and its superseding number, WE25M40 Fixes squealing, rumbling, and grinding drum noise Fits GE, Hotpoint, and Kenmore dryers Product Specifications Part Number WE25X205 OEM Part Number WE25X205, WE25M40 Part Type Dryer Rear Drum Bearing Kit Condition Aftermarket Replacement Location Rear of Drum Application GE, Hotpoint & Kenmore Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as the cabinet edges are sharp. Remove the top and front panel as shown in your model's service guide, then lift the drum belt off and slide the drum out, which is easier with a second person. Remove the old rear bearing from the back panel, install the new one in the same position, and reassemble in reverse order. Check the belt, idler pulley, and drum glides while the drum is out and replace any that are worn. Plan on about 30 minutes to 1 hour. Frequently Asked Questions My dryer squeals when the drum turns. Is this the part I need? A squeal that follows the drum is most often a worn rear drum bearing, though a worn idler pulley or drum glides can make similar noise. If you can spin the drum by hand and feel roughness or hear grinding, the bearing is a likely cause. What's the difference between WE25X205 and WE25M40? GE's catalog lists WE25X205 as superseded to WE25M40, and retailers list them as interchangeable. This listing covers both numbers. Should I replace the drum belt at the same time? It's a good idea. The drum has to come out to reach the bearing, so this is the easiest time to inspect the belt, idler pulley, and drum glides and replace anything worn. Will this fit my dryer? It is listed for many GE, Hotpoint, and Kenmore dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

131825900 Dryer Genuine OEM Drum Bearing Cup Product Overview The 131825900 Dryer Drum Bearing Cup is a Genuine OEM replacement part designed for the rear of the dryer drum. This part provides smooth rotation and stable support, reducing friction and noise during operation. If your dryer is squealing or vibrating excessively, replacing the drum bearing cup can restore quiet, efficient performance. ✅ Genuine OEM Quality✅ Ensures Smooth Drum Rotation✅ Reduces Noise & Wear✅ Durable and Precision-Fit Parts-O-Matic OFFERS free shipping — no hidden costs, just fast delivery! 🔁 Replaces Part Numbers 131825900, 08015223, 3281008, 5303281008, 774936, 85-951, Q000143951, Q143951, WQ143951, AH418807, DE727, EA418807, AP2107679, PS418807. Fits a variety of Frigidaire, Gibson, Kelvinator, and Electrolux dryer models. Unsure if it’s the right fit? Send us your model number — we’ll confirm for you. 🔧 Maintain peak performance — get the 131825900 Genuine OEM Drum Bearing Cup from Parts-O-Matic today.

Read more less

XPARTCO 4581EL2002H Dryer Drum Roller w/ Bearing Replaces 4581EL2002L, 4581EL2002C The XPARTCO 4581EL2002H is an aftermarket replacement drum support roller for LG-built dryers sold under the LG, Kenmore, and GE brands. This roller sits under the drum and lets it rotate smoothly against the dryer's frame. As the roller's internal bearing wears out, it commonly starts producing a loud rumbling, squeaking, or thumping noise, and in more advanced cases the drum can start riding unevenly or vibrating during the cycle. This version includes a self-lubricating bearing built into the roller wheel, along with the mounting shaft, nut, and washer needed for installation. It's sold as a single roller assembly — check your dryer's parts diagram to confirm whether you need one roller or a full set, since most drums use two or four rollers and it's common practice to replace them as a set even if only one has failed. It directly replaces 4581EL2002L, 4581EL2002A, 4581EL2002B, 4581EL2002C, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001D, 4581EL3001F, AP6985402, AP7220429, AGM75510755, EAP12749664, PD00064735, and PS12749664. Installs in 30–60 minutes with basic hand tools. Quick Answer The XPARTCO 4581EL2002H Dryer Drum Roller w/ Bearing fixes LG, Kenmore, and GE (LG-built) dryers with a loud rumbling, squeaking, or thumping noise, or a drum that vibrates or rides unevenly during the cycle. 3-1/8" diameter x 2-3/8" width, self-lubricating bearing, sold as a single roller with shaft, nut, and washer. Replaces 4581EL2002L, 4581EL2002A/B/C/D/E, 4581EL3001A/C/D/F, AP6985402, AP7220429, AGM75510755, EAP12749664, PD00064735, PS12749664. Classic symptom: rhythmic thumping or squeaking noise that speeds up and slows down with drum rotation. Common Problems This Part Fixes Loud rumbling, squeaking, or squealing noise from the dryer during operation Rhythmic thumping noise that tracks with drum rotation speed Drum riding unevenly or wobbling during the cycle Excessive vibration felt through the cabinet Visible wear, cracking, or flat spots on the roller wheel Drum dragging or binding as it rotates Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drum roller directly replaces the following OEM and cross-reference part numbers: 4581EL2002H, 4581EL2002L, 4581EL2002A, 4581EL2002B, 4581EL2002C, 4581EL2002D, 4581EL2002E, 4581EL3001A, 4581EL3001C, 4581EL3001D, 4581EL3001F, AP6985402, AP7220429, AGM75510755, EAP12749664, PD00064735, PS12749664 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum roller is compatible with select LG-built dryers from the following brands: LG dryers (including DLG59988S, DLE9577SM, DLE0442W, DLE8377NW, and related models) Kenmore / Sears dryers (select LG-built models) GE dryers (select LG-built models) Worth Noting: Our sourcing found 4581EL2002L currently listed by the manufacturer as a 4-roller kit that itself lists 4581EL2002H among the numbers it replaces — while 4581EL2002H (this listing) is sold as a single roller assembly. Rather than one version cleanly superseding the other, these appear to be the same roller design sold under two different SKUs at two different quantities (single vs. 4-pack). Confirm how many rollers your dryer's parts diagram calls for, and contact our support team with your model number if you want to verify which listing fits your order best. Key Features Direct-fit LG-platform dryer drum support roller with self-lubricating bearing Resolves "rumbling noise," "thumping," "squeaking," and "uneven drum" symptoms caused by roller wear 3-1/8" diameter x 2-3/8" width — matches original roller dimensions Includes mounting shaft, nut, and washer for a complete installation Plastic/rubber wheel with metal shaft construction Replaces 4581EL2002L, 4581EL2002A/B/C/D/E, 4581EL3001A/C/D/F, AP6985402, AP7220429, AGM75510755, EAP12749664, PD00064735, and PS12749664 Compatible with LG, Kenmore, and GE (LG-built) dryers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XP4581EL2002H OEM Part Number 4581EL2002L / 4581EL2002C Part Type Dryer Drum Support Roller with Bearing Condition Aftermarket Replacement Quantity 1 Roller Assembly (with shaft, nut) Diameter 3-1/8" Width 2-3/8" Bearing Type Self-Lubricating Compatible Brands LG, Kenmore, GE Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Remove the front panel (typically held by spring clips or screws behind the door frame) to access the drum. Support the drum from the front so it doesn't drop once the front panel is off. Locate the roller assemblies on the support shafts at the rear or bottom of the drum cavity. Remove the retaining nut/clip holding the old roller onto its shaft, and slide the old roller off. Slide the new 4581EL2002H roller onto the shaft and secure it with the nut and washer, matching the original orientation. If replacing multiple rollers, repeat for each one — most technicians replace all rollers at once even if only one has failed, since the others are usually not far behind in wear. Reinstall the front panel and drum, restore power, and run a test cycle to confirm the noise is gone and the drum spins smoothly. Tools needed: nut driver or socket set, putty knife (for spring clips, if applicable). Frequently Asked Questions My dryer makes a loud thumping or squeaking noise that speeds up with the drum — is this the part? This is one of the most common symptoms of a worn drum roller bearing. As the bearing wears, the roller develops flat spots or excess play, producing a noise that tracks with drum rotation speed. Confirm by looking at the roller wheels through the front panel opening for visible wear, cracking, or flat spots before ordering. Do I need one roller or a full set? Check your dryer's parts diagram — most LG-platform drums use either two or four support rollers. This listing is for a single roller assembly. Even if only one roller is worn, many technicians replace the full set at once since the remaining originals are usually close behind in wear and it saves a repeat repair. Is 4581EL2002H the same as 4581EL2002L? They're the same roller design, but sold under different SKUs at different quantities — 4581EL2002H as a single roller, and 4581EL2002L as a 4-roller kit. Our sourcing found these numbers cross-referencing each other rather than one being a strict newer replacement for the other. Order based on how many rollers you actually need rather than assuming one number is more "current" than the other. Do I need to replace the drum belt or idler pulley at the same time? Not necessarily, but if your dryer has significant runtime, it's worth inspecting the drum belt and idler pulley (4400EL2001F and 4561EL3002A on this platform) while you have the drum out, since they're subject to similar wear and are far easier to replace with the drum already accessible. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

3204405 Washer Outer Tub Bearing Replaces: 3204405, 508644, AH446536, EA446536, AP2131587, PS446536. 3204405 Washer Outer Tub Bearing – Genuine OEM Replacement Fix noisy or unbalanced wash cycles with the 3204405 Outer Tub Bearing. This Genuine OEM part supports the washer drum and allows smooth, quiet rotation during cycles. Key Features: ✅ Genuine OEM Part – designed for reliable, long-lasting performance 🔁 Replaces: 3204405, 508644, AH446536, EA446536, AP2131587, PS446536. 🌀 Ensures smooth drum movement and reduces vibration 🛠️ Fits select Frigidaire, Gibson, Kenmore, Westinghouse washers 🧰 Essential for tub and spin basket support ⚠️ Washer must be disassembled for bearing replacement. Contact us to confirm compatibility. 📦 Part Number: 3204405💯 30-Day Money Back Guarantee

Read more less

WE49X20697 Dryer Genuine OEM Front Bearing Repair Kit This Kit Includes Following Parts WE3M26 top front bearing WE09X27634 front drum felt WE03X29897 drive belt 2 x WE03X37317 bearing slides, 2 x WE03X37318 glide slides Replaces Part Numbers:WE49X20697, AP5806906, EAP9493092, FIX9493092, PS9493092, AGE25473, PD00025425, WE03X37318, WE1M504, WE01M0333, WE1M333, AP7217724, WE03X37317, WE1M1067, WE01M0316, WE1M316, WE1M481, WE1M507, AP7217723, WE03X29897, WE12M29, WE12X21574, WE21M29, 559C197P001, 559C197P003, WE120122, WE12M0022, WE12M22, WE12M33, AP7012633, WE3M26, 1089201, AH960316, EA960316, PS960316, WE03M0020, WE3M20, AP3790641, WE09X27634, WE09X20441, WE9M30, WE09M0015, WE9M15, AP6889049   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less