Search results for "felt"

XPWE9X105 Dryer Front Lower Felt Replaces Part Numbers:WE9X105, 277130, AH268338, AP2043044, EA268338, PS268338, WE09X0105   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W11189144 Genuine OEM Dryer Felt Drum Seal - Compatible with Whirlpool, Maytag, Kenmore Product Description Maintain your dryer’s efficiency with the W11189144 Genuine OEM Dryer Felt Drum Seal. This Whirlpool-manufactured felt seal is designed as a replacement for select Whirlpool, Maytag, Kenmore, and other compatible dryers. It wraps around the drum, creating a protective barrier between the drum and the cabinet to prevent air leaks, lint buildup, and debris accumulation. This part addresses issues like excess lint near the door, dust inside the dryer, or longer drying times due to reduced airflow efficiency, often caused by wear from regular use or high-heat conditions. Note: Includes (1) felt drum seal. Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: W11189144, W10664120, 4547089, AP6286713, PS12348807, PD00049832, EAP12348807. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED8500DC2, WED8500DC3, WED8500DC4, YWED8500DW0, YWED8500DW4 Maytag: MEDB835DW4, MEDB855DC4, MGDB835DW3, YMEDB855DW4 Kenmore: 110.68132410, 110.68132414, 110.69133410, 110.79133414 Amana: NED4655EW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, and other dryers. 🔧 Specifications: Genuine OEM Whirlpool felt drum seal, high-quality felt material. 💪 Reliable Performance: Prevents air leaks and lint buildup for efficient drying. 🛠️ Easy Installation: Requires adhesive and basic tools; typically installed in 30–60 minutes. 🛡️ Effective Fixes: Resolves excess lint buildup, dust accumulation, and longer drying times. Product Specification Part Number: W11189144 Component Type: Dryer felt drum seal Material: High-quality felt Additional Specs: Adhesive-backed for secure installation Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer running efficiently today! Add to cart now for a reliable fix!

Read more less

WE49X20697 Dryer Genuine OEM Front Bearing Repair Kit This Kit Includes Following Parts WE3M26 top front bearing WE09X27634 front drum felt WE03X29897 drive belt 2 x WE03X37317 bearing slides, 2 x WE03X37318 glide slides Replaces Part Numbers:WE49X20697, AP5806906, PS9493092, WE03X37318, WE1M504, WE01M0333, WE1M333, AP7217724, WE03X37317, WE1M1067, WE01M0316, WE1M316, WE1M481, WE1M507, AP7217723, WE03X29897, WE12M29, WE12X21574, WE21M29, 559C197P001, 559C197P003, WE120122, WE12M0022, WE12M22, WE12M33, AP7012633, WE3M26,  1089201, AH960316, EA960316, PS960316, WE03M0020, WE3M20, AP3790641, WE09X27634, WE09X20441, WE9M30, WE09M0015, WE9M15, AP6889049.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

EXP694 Dryer Repair Kit Replaces DC97-16782A, 6602-001655, DC93-00634A The EXP694 Dryer Repair Kit is a complete drum system rebuild solution designed to restore smooth, quiet, and efficient dryer operation. This kit includes the most common wear components found inside your dryer: drum belt, idler pulley, and drum support rollers. Over time, these parts wear down together, causing squeaking, grinding, drum slippage, or complete failure to spin. Replacing all components at once ensures proper alignment, eliminates noise, and prevents repeat breakdowns — making this the most effective long-term repair solution. Quick Answer The EXP694 Dryer Repair Kit fixes dryers that won’t spin, make loud squeaking or grinding noises, or stop tumbling. It replaces the belt, rollers, and idler pulley to restore smooth and quiet drum operation. Note: Includes four rollers (each with shaft and two tri-rings), one idler pulley, and one belt. Replace all four rollers for even wear. Inspect the drum and felt seal (e.g., DC97-07618A) for wear. Clean lint from the drum and cabinet to prevent overheating. Common Problems This Part Fixes Dryer drum not spinning or slipping Loud squeaking, grinding, or thumping noises Uneven or slow drum rotation Dryer stopping mid-cycle Excessive vibration or instability Worn belt, rollers, or idler pulley components Replaces Part Numbers This repair kit replaces the following common drum system components: Drum Roller: DC97-16782A, AP5325135, DC97-16782C, DC97-16782D, 2027851, DC97-07523A, DC97-07523B, PS4221885, WPW10177428, AP6016361, W10177428, 35001136, DC97-07523A, PS11749648 Idler Pulley: DC93-00634A, AP6038887, DC96-00882C, DC61-01230B, DC96-00882B, PS11771601, 12002777, AP4010261, 1401171, 35001083, 35001098, 35001276, AH2004052, DC61-01215A, DC96-00882B, EA2004052, PS2004052 Drum Belt: 6602-001655, AP4373659, 1935594, 6602-001314, PS4133825, WPW10205415, AP6017004, W10205415, 35001137, 6602-001314, PS11750299 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This repair kit is compatible with select dryers from the following brands: Samsung dryers (gas and electric models) Kenmore / Sears dryers (select models built on Samsung platform) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Complete drum repair kit including belt, rollers, and idler pulley OEM-equivalent fit, performance, and durability Eliminates noise and restores smooth drum rotation Prevents repeat repairs by replacing all wear components together Cost-effective all-in-one repair solution DIY-friendly installation with basic tools Product Specifications Includes 4 drum rollers (DC97-16782A, ~3-1/4" diameter x 1-1/8" width, blue/black plastic/rubber, metal shaft, self-lubricating bushing with ball bearing, each with shaft and two tri-rings), 1 idler pulley (DC93-00634A, metal/plastic), 1 drum belt (6602-001655, 92" long, 5 ribs, neoprene), kit dimensions ~10"L x 6"W x 4"H. Part Type Dryer Repair Kit Includes Belt, Rollers, Idler Pulley Application Dryer Drum System Condition Aftermarket Replacement Compatible Brands Samsung, Kenmore Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Disconnect power before servicing. Remove dryer panels, release belt tension, and replace worn components. Ensure proper alignment of the belt and rollers before reassembly. For best results, replace all components included in this kit at the same time. Frequently Asked Questions Should I replace all parts at once? Yes. The belt, rollers, and pulley wear together. Replacing all components ensures smooth operation and prevents future breakdowns. Will this fix dryer noise? Yes. This kit resolves most squeaking, grinding, and thumping noises caused by worn drum components. Is this an OEM part? This is a high-quality aftermarket repair kit built to OEM-equivalent standards for performance and durability. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WE03X37317 - WE03X37318 Dryer Drum Glide Set - Compatible with GE, Hotpoint. Product Description Restore your dryer’s smooth operation with the WE03X37317 - WE03X37318 Dryer Drum Glide Set from XPARTCO. This replacement set includes four drum slides to support the front of the dryer drum, ensuring smooth rotation. Designed for GE, Hotpoint dryers, it fixes issues like squeaking, grinding, or improper drum rotation. These slides are located on the front panel of the dryer and work to support the drum as it rotates, Slide are designed to reduce friction between the drum and the panel, ensuring smooth operation and helping to prolong the life of the appliance. Note: Includes two WE03X37318 and two WE03X37317 slides.  WE03X37317 Replaces Part Numbers: WE03X37317, WE1M1067, WE01M0316, WE03X37317-50PK, WE1M1067-100PK, WE1M316, WE1M481, WE1M507, AP5668531, AP7217723, PS6447706, PS17137203. WE03X37318 Replaces Part Numbers: WE03X37318, WE1M504, WE01M0333, WE1M333, TJDE504, TJWE1M333, DE504, DE775, TJDE775, AH755842, EA755842, ERWE1M333, AP7217724, PS17137205. Compatibility: Compatible with models including but not limited to: GE: GTD42EASJWW, GTD65EBSJWS, GTD33EASKWW, GTX33EASKWW, GTD72EBPNDG Hotpoint: HTX24EASKWS, HTX21PASKWW Kenmore: 363.61542410 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select GE, Hotpoint, and Kenmore dryer models. 🔄 Specifications: Four replacement plastic drum slides, each ~2–3" long, clip onto drum support for reliable rotation. 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, putty knife, work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves squeaking, grinding, or improper drum rotation. Installation Notes: Safety First: Unplug the dryer or shut off the circuit breaker before installation to avoid electrical shock. Remove top and front panels, access drum support, remove old slides, install new slides from the set, and reassemble. Inspect drum bearing and felt seal for wear. Run a test cycle to confirm smooth operation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO W10464673 Refrigerator Evaporator Fan Motor Replaces WPW10464673 The XPARTCO W10464673 is an aftermarket replacement refrigerator evaporator fan motor compatible with select Whirlpool, KitchenAid, Maytag, Kenmore, and Ikea bottom-freezer and French door refrigerators. The evaporator fan motor is located inside the freezer compartment and circulates cold air from the evaporator coils throughout both the freezer and fresh food sections. Without the evaporator fan running, cold air cannot be distributed — even if the compressor and evaporator are working correctly, both compartments will gradually warm up. A failed evaporator fan motor is one of the most common causes of a refrigerator that runs but does not cool. Rated 115V, 60Hz with a 2-pin connector, this motor features a 14mm shaft length, 3mm shaft diameter, and approximately 13cm (5.1") of wire lead. It is constructed from ABS plastic housing with a metal motor core. It directly replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and EAP11755167. Compatible models include KitchenAid KFFS and KRFF series, Maytag MFB and MFF series, and several Kenmore 106/596-series models. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO W10464673 Refrigerator Evaporator Fan Motor fixes refrigerators where both compartments are too warm, the refrigerator runs but doesn't cool, or there is unusual noise from inside the freezer. 115V/60Hz, 2-pin connector, 14mm shaft, 3mm shaft diameter, 13cm leads. ABS/metal construction. Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Whirlpool, and Kenmore 106/596-series. Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167. Common Problems This Part Fixes Both refrigerator and freezer compartments too warm — evaporator fan not circulating cold air Refrigerator running continuously but not cooling — compressor on but no air circulation Freezer section cold but fresh food section warm — fan not moving air between compartments Unusual buzzing, squealing, or grinding noise coming from inside the freezer No airflow felt inside the refrigerator or freezer when the compressor is running Fan blade visible inside the freezer but not spinning when the compressor runs Ice buildup on the evaporator coils causing the fan blade to stop Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WPW10464673, W10464673, 3020513, AWP50481, EAP11755167, PD00030978, AP6021839, PS11755167, FDQC16WP2A. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select refrigerators from the following brands and series: KitchenAid refrigerators — KFFS20 and KRFF300 series (KFFS20EYMS02, KFFS20EYBL02, KFFS20EYBL04, KRFF300EBL00, KRFF300EBS00 and related models) Maytag refrigerators — MFB2055 and MFF2055 series (MFB2055YEB01, MFB2055YEB02, MFB2055YEM01, MFB2055YEM02, MFB2055YEW02, MFF2055DRE00, MFF2055YEB02, MFF2055YEW00, MFW2055FRH00, MFB2055FRW00 and related models) Whirlpool refrigerators (select bottom-freezer and French door models) Kenmore / Sears refrigerators — 106 series and 596 series (10673002510, 10673002511, 10673003510, 10673003511, 59673002510, 59673003510, 59673003511, 59673009510, 10679472411, 10679473411 and related models) Ikea refrigerators (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments — essential for maintaining set temperatures in both sections 115V, 60Hz — correct electrical specifications for compatible models 2-pin connector — direct plug-in replacement on compatible models Shaft: 14mm length, 3mm diameter — matches original motor shaft dimensions for fan blade compatibility Wire lead length: approximately 13cm (5.1 inches) ABS plastic housing with metal motor core — durable and designed for continuous freezer-temperature operation Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and FDQC16WP2A Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Kenmore 106/596, Whirlpool, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number W10464673 OEM Part Number WPW10464673 Part Type Refrigerator Evaporator Fan Motor Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 115V AC Frequency 60 Hz Connector 2-pin plug Shaft Length 14mm (0.55 inches) Shaft Diameter 3mm (0.12 inches) Wire Lead Length Approximately 13cm (5.1 inches) Material ABS plastic housing / Metal motor core Compatible Brands Whirlpool, KitchenAid, Maytag, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the water supply before beginning. Remove all food and shelving from the freezer compartment. On most compatible models, the evaporator fan is located behind the freezer back panel. Remove the screws securing the freezer back panel and carefully slide it out to expose the evaporator coils and fan assembly. If ice has built up on the fan or coils, use a hair dryer to melt it before attempting to remove the fan — do not force a frozen fan free. Disconnect the 2-pin wire connector from the old motor. Remove the fan blade by pulling it straight off the motor shaft, then unscrew the motor mounting brackets and remove the old motor. Install the new W10464673 motor in the same position, secure the mounting brackets, press the fan blade back onto the shaft, and reconnect the 2-pin connector. Reinstall the freezer back panel, restore power and water, and verify the fan runs when the compressor starts. Tools needed: Phillips screwdriver, hair dryer (if coils are iced), work gloves. Frequently Asked Questions What does the evaporator fan motor do? The evaporator fan motor drives a fan blade inside the freezer compartment that draws air across the evaporator coils — the cold coils remove heat from the air, and the fan distributes the chilled air throughout both the freezer and fresh food sections via a duct system. Without the evaporator fan running, the evaporator coils still get cold and the compressor still runs, but no cold air is circulated. This causes both compartments to gradually warm up even though the refrigeration system itself may be functioning correctly. A failed evaporator fan motor is one of the most common and most frequently misdiagnosed causes of poor refrigerator cooling. How do I know if the evaporator fan motor has failed? Open the freezer door and press the door switch (the small button or tab that tells the refrigerator the door is closed) — this should start the evaporator fan if the compressor is running. If you hear no fan noise and feel no airflow from inside the freezer with the compressor running, the fan motor has likely failed. You can also remove the freezer back panel and physically check whether the fan blade spins freely by hand — if it is stuck or wobbles, inspect for ice buildup or a seized motor bearing. If the blade spins freely but the motor does not run when powered, the motor has burned out. What is the difference between W10464673 and WPW10464673? These are the same evaporator fan motor. WPW10464673 is the updated Whirlpool OEM part number that superseded the original W10464673. The 3020513 is also a cross-reference for this same motor. This aftermarket replacement is compatible with all of these numbers. My freezer is cold but my fridge is warm — could it be the evaporator fan? Yes — this is a classic evaporator fan failure symptom. When the fan motor fails partially, the freezer may still receive some cold air passively from the evaporator, but not enough air is circulated to reach the fresh food section through the duct system. A failed evaporator fan is frequently the cause of this hot-fridge-cold-freezer pattern. Check the fan as described above — if it is not spinning, replacing the W10464673 motor will restore cooling to both compartments. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from ABS plastic and metal to match the electrical specifications and shaft dimensions of the original W10464673 evaporator fan motor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WE12X10011 Dryer Drum Belt Description:  This Belt is a replacement part compatible with Specific GE dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced. Replaces Part Numbers: WE12X10011, 1057513, AH959966, EA959966, AP3421994, PS959966.  This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65 

Read more less

WE49X21874 Dryer Front Bearing Repair Kit Replaces Part Numbers: WE49X21874, AP5970729, 4379300, PS11700897, WE14M124,  1257069, AH1766010, EA1766010, WE14M106, WE14M120, WG04L00523, AP4297334, PS1766010, WE09X27634, WE09X20441, WE9M30, WE09M0015, WE9M15, AP6889049, PS12722961, WE03X29897, WE12M29, WE12X21574, WE21M29, 559C197P001, 559C197P003, WE03X29897-30PK, WE120122, WE12M0022, WE12M22, WE12M33, AP7012633, PS16542496, WE03X37318, WE1M504, WE01M0333, WE03X37318-50PK, WE1M333, AP7217724, PS17137205, WE03X37317, WE1M1067, WE01M0316, WE03X37317-50PK, WE1M1067-100PK, WE1M316, WE1M481, WE1M507, AP7217723, PS17137203. This Kit Includes Following Parts WE14M124 top front bearing WE09X27634 front drum felt WE03X29897 drive belt 2 x WE1M504 bearing slides, 2 x WE1M1067 glide slides Description: The WE49X21874 Dryer Bearing Kit is designed for front-load dryers and makes servicing the dryer easy, affordable, and convenient. This kit works for select GE front-load dryer models. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

12238200001084 Genuine OEM Midea Dryer Bearing House Assembly (Drum Rear Bearing) The 12238200001084 is a Genuine OEM Midea replacement bearing house assembly compatible with select Midea, Criterion, and Insignia electric and gas dryers, including the CDE41N1AW series. The bearing house assembly is mounted at the rear of the drum and houses the bearing that the rear drum shaft rotates within, supporting the back of the drum and allowing it to spin smoothly. Unlike front-mounted slide rollers used on some dryer platforms, this Midea design uses a rear bearing housing assembly to carry the load at the back of the drum. When the bearing house assembly wears out — typically from age, lack of lubrication, or accumulated lint and debris — the drum no longer spins smoothly on its rear support, resulting in grinding, rumbling, or squealing noise, increased drum drag, and in advanced cases, visible wobble or binding of the drum during rotation. As a Genuine OEM part manufactured by Midea to factory specifications, the 12238200001084 is a complete bearing house assembly designed as a direct replacement for the original equipment component. Installs in 45–60 minutes with basic hand tools, as drum removal is required. Quick Answer The 12238200001084 Genuine OEM Midea Dryer Bearing House Assembly fixes Midea, Criterion, and Insignia dryers with grinding, rumbling, or squealing noise from the rear of the drum, increased drum drag, or visible drum wobble. Mounted at the rear of the drum — houses the bearing the rear drum shaft rotates within. Genuine OEM. Compatible with Midea CDE41N1AW and related Midea electric dryer platform models. Requires drum removal to access — a more involved repair than a front roller swap. Common Problems This Part Fixes Loud grinding or rumbling noise from the rear of the drum during the drying cycle Squealing or squeaking noise as the drum rotates — worn or dry bearing surface Increased drag or resistance felt when manually rotating the drum by hand Drum wobbling or binding during rotation — worn bearing no longer providing stable support Excessive vibration during the drying cycle Visible wear, cracking, or lint/debris buildup in the bearing house area Drum scraping against the rear bulkhead due to lost bearing support Replaces Part Numbers This bearing house assembly directly replaces the following part number: 12238200001084, AP7154967, PS18167713 This is the Midea manufacturer part number used across the compatible Midea, Criterion, and Insignia dryer platform. Contact our support team with your model number if you need confirmation before ordering. Compatibility This bearing house assembly is compatible with select Midea, Criterion, and Insignia dryers, including: Midea CDE41N1AW electric dryer Midea MLE series electric dryers (select models — same drum/bearing platform) Criterion electric dryers built on the Midea platform (select models) Insignia electric dryers built on the Midea platform (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by Midea to factory specifications — guaranteed fit and performance Complete bearing house assembly — supports the rear of the drum and allows smooth, quiet rotation Houses the bearing that the rear drum shaft rotates within — a sealed-style design intended to resist lint intrusion Direct replacement for the original equipment bearing house assembly Compatible with Midea CDE41N1AW and related Midea, Criterion, and Insignia electric dryer platform models Installs in 45–60 minutes with basic hand tools (drum removal required) Product Specifications Part Number 12238200001084 Part Type Dryer Bearing House Assembly (Drum Rear Bearing) Condition Genuine OEM Application Electric Dryers (Midea platform) Location Rear of drum — houses rear drum shaft bearing Compatible Brands Midea, Criterion, Insignia Installation Notes ⚠️ Unplug Dryer Before Starting — Wear Work Gloves Disconnect power before beginning. Wear work gloves — there are sharp sheet metal edges inside the dryer cabinet. Remove the lint filter housing screws, release the top panel locking clips with a putty knife, and lift the top panel. Remove the front panel to access the drum. Take a photo of the belt routing before disconnecting the drive belt from the idler pulley. Carefully lift the drum out of the cabinet and set it aside on a padded surface. Locate the bearing house assembly mounted at the rear bulkhead where the drum's rear shaft was seated. Remove the mounting screws or clips securing the old bearing house assembly and pull it free. Clean any accumulated lint or debris from the mounting area before installing the new part. Install the new 12238200001084 bearing house assembly in the same position and secure the mounting hardware. Reinstall the drum, re-route and reconnect the drive belt, and reassemble the front and top panels. Restore power and run a test cycle to confirm the drum rotates smoothly and quietly. Tools needed: Phillips screwdriver, putty knife, work gloves. Frequently Asked Questions What does the bearing house assembly do? The bearing house assembly is mounted at the rear bulkhead of the dryer and houses the bearing that the rear drum shaft rotates within. It supports the back of the drum as it spins, allowing smooth, low-friction rotation throughout the drying cycle. Unlike dryer platforms that use front-mounted slide rollers or felt seals for drum support, this Midea design relies on a dedicated rear bearing housing to carry the structural load at the back of the drum. As the bearing wears, friction increases, leading to noise, drag, and eventually wobble or binding if left unaddressed. How do I know if the bearing house assembly has failed versus another component? A grinding, rumbling, or squealing noise specifically tied to drum rotation — rather than the blower motor or idler pulley — and noise that changes pitch as the drum speeds up or slows down often points to the rear bearing. With the dryer unplugged and the drum exposed (front panel removed), try rotating the drum by hand: if you feel noticeable resistance, grinding, or grittiness compared to a smooth, free rotation, the bearing house assembly has likely worn out and needs replacement. Why does this repair require removing the drum? The bearing house assembly is mounted at the rear bulkhead behind the drum, supporting the drum's rear shaft from the inside. There is no way to access this component without first removing the front panel and lifting the drum out of the cabinet. This makes it a more involved repair than swapping a front-accessible part like a belt or idler pulley, but it follows the same general dryer disassembly procedure used for accessing other internal drum components. Should I inspect other components while the drum is out? Yes — since the drum must already be removed to access the bearing house assembly, this is an excellent opportunity to inspect the drive belt, idler pulley, and any felt seals or gaskets around the drum opening for wear. Components in this drum drive system tend to wear together, and addressing multiple worn parts in a single repair session helps avoid a near-term repeat teardown. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Midea to factory specifications. It is the exact same bearing house assembly installed in compatible Midea, Criterion, and Insignia electric dryers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO W10721967 Washer Drive Clutch Kit The XPARTCO W10721967 is an aftermarket replacement drive clutch kit — often called a "splutch" kit — for Whirlpool-built top-load washers. This assembly sits at the base of the transmission and works together with the mode shift actuator to control how power reaches the washer: during agitation, the clutch engages to drive the washplate back and forth, and during spin, it locks up to spin the inner wash basket at full speed. The name "splutch" comes from what it actually is — part spring, part clutch — and that spring-loaded design is what lets the same assembly smoothly transition between the gentle agitate motion and the much more forceful spin cycle. This is a complete 6-piece kit: spring, clutch housing, cam ring, basket drive gear, drive pulley, and mounting nut, so you're replacing the entire wear-prone assembly at once rather than chasing individual worn components. Over time the clutch's friction surfaces glaze over and wear down, the cam ring's engagement points round off, and the spring loses tension — all of which produce the same telltale complaint: a loud grinding, clicking, or clunking noise during agitation or spin, sometimes alongside a washer that spins weakly, agitates but won't spin, or runs hot and starts to smell from the friction of a slipping clutch. It directly replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, and PS10057144. Quick Answer The XPARTCO W10721967 Washer Drive Clutch Kit fixes Whirlpool-built top-load washers with loud grinding, clicking, or clunking noise during agitation or spin, a washer that agitates but won't spin, weak or no spin, an overheating smell, or a drum that doesn't spin the pump properly. Complete 6-piece "splutch" kit — spring, housing, cam ring, basket drive gear, pulley, and nut. Replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, PS10057144. Often replaced together with the drive belt, since both wear on a similar schedule and share the same teardown. Common Problems This Part Fixes Loud grinding, clicking, or clunking noise during agitation or spin Washer agitates normally but won't spin, or spins very weakly Drive pump doesn't rotate properly, leading to slow or incomplete draining Washer stops agitating partway through a cycle Washer running unusually hot, sometimes with a burning or odd odor Loud noise specifically when transitioning between agitate and spin Clothes coming out excessively wet because the spin cycle isn't reaching full speed Rattling or looseness felt at the drive pulley when the basket is turned by hand Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer drive clutch kit directly replaces the following OEM and cross-reference part numbers: W10721967, W10721967VP, AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10818965, W11396423, 3319979, PS10057144, EAP10057144, AWP40988, PD00005593. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drive clutch kit is compatible with select Whirlpool-built top-load washers across the Whirlpool family of brands, including: Whirlpool top-load washers — WTW series Maytag top-load washers — MVWC series (select Whirlpool-built models) Kenmore top-load washers — KATW and NTW series (select Whirlpool-built models) Amana top-load washers (select models) Crosley top-load washers (select models) Roper top-load washers (select models) Inglis top-load washers (select models) Verified model numbers include: 1CWTW4705GW0, 1CWTW4705GW1, 1CWTW4705GW2, 1CWTW4815EW0, 1CWTW4815EW1, 1CWTW4815EW2, 1CWTW4815EW3, 1CWTW4840YW2, 1CWTW4845EW0, 1CWTW4845EW1, 1CWTW4845EW2, 1CWTW4845EW3, 2DWTW4740YQ1, 4GWTW1805LW0, 4GWTW1805LW1, 4GWTW1955LW0, 4GWTW1955LW1, 4GWTW3000FW0, 4GWTW3000FW1, 4GWTW4740YQ3, 4GWTW4800YQ3, 4KATW5215FW0, 4KATW5415FW0, 4KMVWC215FW0, 4KMVWC315FW0, 4KMVWC410JW0, 4KMVWC415FW0, 4KMVWC420JW0, 4KMVWC425FW0, 4KMVWC430JW0, 4KMVWC440JW0, 4KNTW3100JW0, 4KNTW3200JW0, 4KNTW3300JW0, 7MWGT4027HW1, WTW5000DW1, and MVWX655DW1. Note: This kit fits Whirlpool's belt-drive top-load washer platform specifically. It is not intended for direct-drive designs that don't use a separate clutch and belt system. Because this drive clutch kit fits an extremely broad range of model years and revisions, always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Complete 6-piece "splutch" kit — spring, clutch housing, cam ring, basket drive gear, drive pulley, and mounting nut Works together with the mode shift actuator to engage agitation and lock up for full-speed spin Resolves "grinding or clicking noise," "won't spin," "agitates but won't spin," and "overheating smell" symptoms caused by clutch wear Replaces the entire wear-prone assembly at once rather than individual components Direct drop-in replacement for the washer transmission's drive pulley and clutch assembly Replaces AP5951296, W10006352, W10006353, W10006354, W10006356, W10006382, W10239973, W10315818, W10326374, W10536113, W10721967VP, W10818965, W11396423, 3319979, and PS10057144 Compatible with a wide range of Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis top-load washers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number W10721967 OEM Part Number W10721967 / AP5951296 Part Type Washer Drive Clutch Kit ("Splutch") Condition Aftermarket Replacement Application Whirlpool-Built Belt-Drive Top-Load Washers Kit Contents Spring, clutch housing, cam ring, basket drive gear, drive pulley, mounting nut Function Engages agitation and locks up for full-speed spin Repair Difficulty Moderate — 30-45 minutes Quantity 1 clutch kit (6 pieces) Compatible Brands Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, Inglis Installation Notes ⚠️ Unplug Washer And Shut Off Water Before Starting — Tip Onto Its Back Or Front With Care Disconnect power at the outlet or shut off the circuit breaker, and close the water supply valves before beginning. Wear work gloves. Access is from underneath the washer: remove the inner wash basket first (this typically requires a large basket-hub or spanner tool and applying steady upward pressure to break the basket free from the drive hub), then carefully tip the washer onto its back or front, protecting the top and any control panel with a blanket or padding as you lay it down. Photograph the belt and pulley arrangement before disconnecting anything. Remove the drive belt from the motor pulley, then remove the mounting nut and pull the old clutch/pulley assembly off the transmission shaft — a puller tool can help if it's seized. Install the new W10721967 assembly onto the shaft in the same orientation, torque the mounting nut to the manufacturer's specification, and reinstall the drive belt, checking that it seats correctly in the pulley grooves. Carefully stand the washer back upright, reinstall the wash basket, and reconnect it to the drive hub. Restore water and power, then run a full test cycle through agitate and spin, listening for the grinding or clicking noise that prompted the repair. Tools needed: basket-hub removal tool or spanner wrench, socket set, 13mm socket, 5/16" nut driver, pliers, work gloves, and a helper to assist with tipping the washer. Frequently Asked Questions What does "splutch" mean, and why is it sold as one kit instead of individual parts? "Splutch" is shorthand for spring-clutch — the assembly combines a spring-loaded clutch mechanism with the drive pulley and gear that together control agitation and spin. Whirlpool sells this as a single kit because the individual components wear together and interact closely; replacing just the pulley while leaving a worn cam ring or a fatigued spring in place often means the noise or slipping symptom returns quickly. Replacing the complete kit resolves the failure at its actual source. My washer agitates fine but won't spin. Is this the clutch? It's one of the most common causes of exactly that symptom. The clutch has to lock up firmly to transfer full power into spinning the basket; if its friction surfaces have worn down or glazed over, it can still engage well enough for the lighter agitation motion but slip under the higher torque demand of spin. If you hear grinding or clicking specifically as the washer transitions into spin, that reinforces the clutch as the likely cause. Should I replace the drive belt at the same time? It's worth strongly considering. The belt and clutch wear on a similar schedule and share the same teardown — you're already tipping the washer over and removing the belt to access the clutch, so replacing a belt that's showing wear at the same time saves you from repeating the whole disassembly again in the near future. Inspect the belt for glazing, cracking, or fraying while it's off and replace it if it shows any of those signs. The washer smells hot or burnt. Is that dangerous, and does it point to this part? A worn clutch that's slipping generates friction heat, which can produce a warm, slightly burnt smell — this is a real symptom of clutch wear and not something to ignore, since continued operation in that state accelerates wear on the clutch and can stress the drive motor. If you notice this smell along with weak or absent spin, stop using the washer and address the clutch before running further loads. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the spring tension, cam ring engagement geometry, pulley dimensions, and mounting configuration of the original W10721967 clutch kit used in compatible Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis top-load washers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP 40111201 Dryer Drum Belt  Replaces Part Numbers: WP40111201, 40111201, 14218936, 40051501, 40051502, 59174, AP6009126, PS11742271, R0606549, WP40111201VP, 661570V, 661570, 3387610, 3389728, 3393999, 339728, 661570VP, AP5983729, PS11722115. Description: This Belt is a replacement part compatible with specific Whirlpool, Maytag, Speed Queen dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

XPARTCO DC47-00016A Dryer Thermal Fuse The XPARTCO DC47-00016A is an aftermarket replacement thermal fuse for Samsung dryers. Mounted on the blower housing near the heat source, this fuse is a one-time safety device: as long as the dryer stays within its normal operating temperature, it does nothing at all, but the instant internal temperatures climb dangerously high — almost always from restricted airflow — the fuse permanently opens the circuit and cuts power to the dryer. That's why a blown thermal fuse produces such a specific symptom: the dryer won't start at all, with no lights, no tumble, and no response, even though the outlet has power. This fuse terminates in 1/4" male spade connectors for a direct plug-in fit. Unlike a thermostat, a thermal fuse cannot be reset once it blows — it must be replaced. Critically, a blown thermal fuse is almost always a symptom rather than a random failure: restricted exhaust venting is the leading cause, since trapped heat is exactly what the fuse is designed to react to. A failing thermistor can also cause repeated fuse blows, since the two work together to regulate temperature. It directly replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, and 35001087. Quick Answer The XPARTCO DC47-00016A Dryer Thermal Fuse fixes Samsung dryers that won't start at all — no lights, no tumble, no response to any button — after overheating from restricted airflow. 1/4" male spade terminals. Replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, 35001087. Always inspect and clean the dryer venting when replacing this fuse — a blown fuse is a symptom of restricted airflow, and installing a new fuse without fixing the vent will likely blow it again. Common Problems This Part Fixes Dryer won't start at all — no lights, no tumble, no response to any button Dryer that stopped working suddenly, especially after a load felt unusually hot Dryer runs a short time then shuts off completely and won't restart Repeated blown fuses on a dryer with a known venting or airflow restriction Clothes coming out extremely hot right before the dryer stopped working Dryer that recently smelled like burning or overheating before failing Continuity test shows an open circuit across the old fuse Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer thermal fuse directly replaces the following OEM and cross-reference part numbers: DC47-00016A, L0016A, AP4201894, PS4205213, AP6008681, EAP4205213, OEM12605691, EAP11741821, ASM868996, PD00005341, PD00003747, PS11741821, 35001087, WP35001087. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermal fuse is compatible with select Samsung dryers, and also fits select LG and Kenmore dryers built on a compatible platform, including model numbers such as: DV209AEW/XAA, DV210AEW, DV210AEW/XAA DV218AEB/XAA, DV218AEW/XAA, DV219AEW/XAA, DV220AEW, DV220AEW/XAA DV330AEW, DV350AEW/XAA, DV419AEW/XAA Note: This fuse is commonly paired with a matching thermistor (DC32-00007A) and thermostat (DC96-00887A / DC47-00018A), and manufacturer guidance recommends replacing the thermistor at the same time as the fuse, since the two work together and a failing thermistor is a common cause of repeated fuse blows. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Aftermarket replacement thermal fuse — one-time safety device that cuts power if the dryer overheats Resolves "won't start at all," "stopped working suddenly," and "clothes came out extremely hot before it died" symptoms caused by a blown fuse 1/4" male spade terminal connectors for a direct plug-in electrical fit Mounts to the blower housing near the heat source Replaces 2068545, AP4201894, AP4201899, PS4205213, EAP4205213, PS2038378, PS2038533, and 35001087 Compatible with select Samsung, LG, and Kenmore dryers Aftermarket replacement built to OEM-equivalent quality standards Quick, simple repair — no special tools required beyond a basic screwdriver Product Specifications Part Number DC47-00016A OEM Part Number DC47-00016A Part Type Dryer Thermal Fuse (Thermal Cut-Off) Condition Aftermarket Replacement Location Blower housing, near the heat source Terminals 1/4" male spade connectors Resettable No — one-time use, must be replaced once blown Companion Parts Thermistor DC32-00007A, thermostat DC96-00887A / DC47-00018A Quantity 1 thermal fuse Compatible Brands Samsung, LG, Kenmore Installation Notes ⚠️ Unplug Dryer Before Starting — Inspect And Clean The Venting Before Reassembling Disconnect power at the outlet or shut off the circuit breaker before beginning. Wear work gloves. Access is typically through the rear panel: remove the screws securing the panel to reach the blower housing where the fuse is mounted, usually alongside the thermistor. Photograph the wiring before disconnecting the spade terminals from the old fuse. Remove the mounting screw holding the fuse in place and pull it free, disconnecting both spade terminal wires. Before installing the new fuse, test it for continuity with a multimeter to confirm it's good out of the box, and test the old one to confirm it's actually blown (no continuity) rather than assuming. This is the most important step: fully inspect and clean the dryer's exhaust vent, from the lint trap housing all the way to the exterior vent hood, checking for lint buildup, crushed sections, or excessive length. A blown thermal fuse is a symptom of restricted airflow, and skipping this step means the new fuse is likely to blow again. Install the new DC47-00016A in the same mounting position, reconnect both spade terminals, and secure the mounting screw. Reinstall the rear panel, restore power, and run a test cycle to confirm normal heating and shutoff behavior. Tools needed: Phillips or nut driver (model-dependent), multimeter, vent brush or vacuum attachment for cleaning ductwork, work gloves. Frequently Asked Questions I replaced the fuse and it blew again. What's going on? This is a strong sign that the underlying cause — almost always restricted airflow — was never addressed. Thermal fuses don't fail from age; they blow because the dryer overheated. If a new fuse keeps blowing, thoroughly inspect and clean the entire exhaust path from the lint trap housing to the outside vent hood, checking for lint buildup, crushed or kinked ductwork, or a vent run that's too long. If airflow checks out and the fuse still blows, have the thermistor and thermostat checked as well, since a failing thermistor can also trigger repeated fuse blows. Can I just reset the thermal fuse instead of replacing it? No. Unlike a thermostat, a thermal fuse is a one-time safety device — once it blows, its internal circuit is permanently broken and it cannot be reset or repaired. Replacement is the only option. Should I replace the thermistor at the same time as the fuse? It's worth strongly considering, and it's a common manufacturer recommendation. The thermistor and thermal fuse work together to manage temperature, and a failing thermistor can cause the dryer to run hotter than it should, leading directly to repeated fuse blows. Replacing both together, especially if your dryer has blown this fuse more than once, addresses the more likely root cause rather than just the symptom. My clothes came out extremely hot right before the dryer died. Is that related? Yes, this is a classic warning sign. Clothes coming out unusually hot indicates the dryer was already running hotter than normal, which is exactly the condition that leads to a blown thermal fuse. If you noticed this before the dryer stopped working, it strongly points to a ventilation or airflow problem that should be fully addressed before running the dryer again. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications, spade terminal connections, and mounting configuration of the original DC47-00016A thermal fuse used in compatible Samsung, LG, and Kenmore dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less