Search results for "refrigerator relay"

XPARTCO W10613606 Refrigerator Compressor Start Relay and Capacitor The XPARTCO W10613606 is an aftermarket replacement compressor start relay and capacitor assembly compatible with a wide range of Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Admiral, Crosley, Dacor, Hardwick, Inglis, Litton, and Magic Chef refrigerators. The start relay is a small but critical electrical component that plugs directly onto the compressor terminals and provides the initial power surge needed to start the compressor motor. Once the compressor reaches operating speed, the relay drops out — leaving the compressor to run on its own. The capacitor (rated 15µF ±5%, 250VAC) works alongside the relay to store and release the burst of electrical energy needed on startup. When the start relay fails, the compressor cannot start — causing the refrigerator to stop cooling entirely. A failed relay typically produces a clicking sound every few minutes as the compressor tries and fails to start, followed by a short rest, then another attempt. This kit includes both the start relay and the CBB61 capacitor. It directly replaces W10416065, 8208290, 8208368, C8931605, 67003186, 67005560, 67005561, 67005562, 67003764, 8171210, and several additional cross-reference numbers. Installs in under 15 minutes — no tools required in most cases. Quick Answer The XPARTCO W10613606 Refrigerator Compressor Start Relay and Capacitor fixes refrigerators that are not cooling, are too warm, or are making a repeated clicking sound every few minutes as the compressor tries to start. Plugs directly onto the compressor terminals. Kit includes start relay and 15µF 250VAC CBB61 capacitor. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, and more. Replaces W10416065, 8208290, C8931605, 67005560, and more. No tools required — installs in under 15 minutes. Common Problems This Part Fixes Refrigerator not cooling — compressor not running Freezer section too warm or not freezing Both refrigerator and freezer compartments gradually warming up Repeated clicking sound every 2–5 minutes from behind or underneath the refrigerator Compressor hums briefly then shuts off without reaching operating temperature Refrigerator runs but cannot maintain set temperature Shaking the start relay reveals a rattling sound inside — confirms internal failure Replaces Part Numbers This start relay and capacitor kit directly replaces the following OEM and cross-reference part numbers: W10613606, 67005560, 3023300, 67003186, 67003764, 67005561, 67005562, W10416065, 8171210, 8208290, 8208368, W10244032, 302TFBYY, SSP14R302TFR,  AWP41206, C8931605, PD00004905, EAP8746522, AP5787784, PS8746522. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This start relay and capacitor is compatible with select refrigerators from the following brands: Whirlpool refrigerators (side-by-side, French door, bottom-freezer) Kenmore / Sears refrigerators (select Whirlpool-built models) Maytag refrigerators KitchenAid refrigerators Amana refrigerators Jenn-Air refrigerators Admiral refrigerators Crosley refrigerators Dacor refrigerators Hardwick refrigerators Inglis refrigerators Litton refrigerators Magic Chef refrigerators Important: Always verify your refrigerator's model number and compare the old relay's shape and terminal configuration to the new part before installing. Some models may require trimming the wire connector tabs for a proper fit. Contact our support team with your model number if you need confirmation before ordering. Key Features Provides the initial electrical surge needed to start the compressor motor — without it, the compressor cannot run and the refrigerator cannot cool Kit includes both the start relay and the CBB61 run capacitor (15µF ±5%, 250VAC) — everything needed in one package Plugs directly onto the compressor terminals — no wiring or soldering required in most cases Quick rattle test — shake the old relay; if it rattles, the internal contacts have failed and it needs replacement Replaces W10416065, 8208290, C8931605, and over a dozen additional cross-reference part numbers Compatible with 13 major appliance brands on the Whirlpool platform Aftermarket replacement built to OEM-equivalent quality standards Fast DIY repair — installs in under 15 minutes, no tools required in most cases Product Specifications Part Number W10613606 Part Type Refrigerator Compressor Start Relay and Capacitor Kit Condition Aftermarket Replacement Application Refrigerator Compressor (side-by-side, French door, bottom-freezer) Capacitor Type CBB61 Run Capacitor Capacitor Rating 15µF ±5%, 250VAC Kit Includes 1x Start relay, 1x CBB61 capacitor Installation Plug-in — no tools required in most cases Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Jenn-Air, Admiral, Crosley, Dacor, Hardwick, Inglis, Litton, Magic Chef Installation Notes ⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator from the power outlet before beginning. Move the refrigerator away from the wall to access the rear or lower back panel. Remove the rear access panel by unscrewing the retaining screws to expose the compressor. The compressor is a large black dome-shaped component — the start relay and capacitor assembly plugs onto the side terminals. Grip the old relay firmly and pull it straight off the compressor pins. Shake it — if it rattles, the internal contacts have failed and replacement is confirmed. Compare the old relay to the new W10613606 to confirm the terminal layout matches. Align the new relay with the compressor pins and press it firmly on. Reinstall the access panel, restore power, and listen for the compressor to start and run normally within a few minutes. Note: Some models may require trimming the wire connector tabs or reversing the connector orientation for a proper fit — do not force the connection. Tools needed: Phillips screwdriver (for panel access only). Frequently Asked Questions What does the compressor start relay do? The start relay plugs onto the compressor terminals and provides the brief but powerful surge of electrical current needed to start the compressor motor from a standstill. Once the compressor reaches operating speed — usually within a second or two — the relay drops out and the compressor runs on its own. Without a working start relay, the compressor cannot start at all, and the refrigerator stops cooling. The capacitor works alongside the relay to store and deliver the extra energy needed on startup. How do I know if my start relay has failed? The most reliable quick test is the rattle test: unplug the refrigerator, pull the start relay off the compressor, and shake it near your ear. A working relay is silent. A failed relay will rattle — the internal contacts have broken free and are loose inside the casing. Another sign is a repeated clicking sound every 2–5 minutes from the back of the refrigerator, where the compressor attempts to start, fails, trips the overload protector, rests, and tries again. If the fridge is warm and you hear clicking, check the relay first. What is the difference between the start relay and the capacitor? The start relay is the switching device that connects and disconnects the start winding of the compressor motor during startup. The capacitor stores a charge and releases it during startup to give the motor the additional torque it needs to get moving under load. Together they work as a startup system for the compressor. This kit includes both — replacing both at the same time ensures the complete startup circuit is fresh and reliable. My fridge is still not cooling after replacing the start relay — what else could it be? If replacing the start relay does not restore cooling, other possible causes include a failed compressor (the compressor runs but no longer builds pressure), a refrigerant leak in the sealed system, a failed start capacitor (if not replaced along with the relay), a bad overload protector, or a faulty main control board. Listen carefully after installing the new relay — if the compressor now starts and runs but the fridge still doesn't cool after several hours, a sealed system issue or refrigerant problem is likely and will require a certified technician. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the electrical specifications and terminal configuration of the original W10613606 start relay and capacitor assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

12002782 Refrigerator Genuine OEM Overload Relay Kit Replaces Part Numbers: 12002782, 1194680, 61005518, AH2004057, EA2004057, OEM12028982, AP4009659, PS2004057. Description: This is a Genuine OEM compressor overload and relay kit for Specific Whirlpool, Maytag, Kenmore Refrigerator models. Kit was recently redesigned by manufacturer.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 297259515 Refrigerator Start Relay & 297286803 Capacitor The XPARTCO 297259515 kit bundles the compressor start relay and the matching run capacitor for Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers. These two components mount together at the compressor and work as a team every time the compressor cycles on: the start relay delivers the initial electrical boost needed to get the compressor's start winding moving, and the run capacitor helps the compressor motor start and run efficiently once it's going. Because they sit side by side on the same compressor terminals and tend to be diagnosed together, replacing both at once is the standard, most reliable fix rather than gambling on which single component has failed. The classic failure symptom for this pair is unmistakable: a repeated clicking sound from the compressor area as the relay tries and fails to start the compressor, paired with a refrigerator and freezer that are both running too warm because the compressor never actually starts. Real-world repair accounts back this up — technicians troubleshooting a clicking-but-not-starting compressor commonly find both the start relay and run capacitor bad at the same time, which is exactly why they're sold together as a kit. It directly replaces, for the relay: 297259502, 297259510, PS11728176, 4378266, AP5986809, EAP11728176; and for the capacitor: AP5306470, 216985001, 297286804, 1465079, 1940424, 215329902, 218909915, 7216985001, 7218909915, AH3495561, EA3495561, PS3495561, and EAP3495561. Quick Answer The XPARTCO 297259515 Refrigerator Start Relay & Capacitor Kit fixes Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers that won't start cooling, run too warm in both compartments, or make a repeated clicking sound from the compressor area. Includes start relay (297259515) and run capacitor (297286803). Capacitors store a dangerous electrical charge even after power is disconnected — always discharge before handling. What's In The Kit Component Part Number Function Compressor Start Relay 297259515 Delivers the initial electrical boost that kickstarts the compressor's start winding, then switches out once the compressor is running. Compressor Run Capacitor 297286803 15 µF, helps the compressor motor start and run efficiently once the relay has engaged it. Common Problems This Kit Fixes Refrigerator won't start cooling at all Fresh food and freezer compartments both running too warm Repeated clicking sound coming from the compressor area Compressor hums but never actually starts running Refrigerator cycling on and off repeatedly without ever cooling properly Refrigerator that stops suddenly during normal operation No cooling despite the refrigerator otherwise appearing to have power Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This start relay and capacitor kit directly replaces the following OEM and cross-reference part numbers: 297259515, 297259502, 297259510, 4378266, AP5986809, EAP11728176, AFR15446, PD00029384, PS11728176, 297286803, AP5306470, 216985001, 297286804, 1465079, 1940424, 215329902, 218909915, 7216985001, 7218909915, 28PRC250150UFEX, AH3495561, EA3495561, EAP3495561, FIX3495561, AFR15479, PD00027525, PS3495561 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This kit is compatible with select Frigidaire refrigerators and freezers, and also fits select Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers built on the same platform, including model numbers such as: CFUFH21TW, CFUMC17QW, CCFU17M1TW FFSS2315T, FFSS2315TS0, FFSS2615T, FFSS2615TD0, FFSS2625T, FGSS2335T LFSS2312T, LFSS2612T FFFC22M6QW, FFFC22M6QWG, FFFH17F2QW, FFFH20F2QW, FFFU17M1QW FFVU17F2SC, FFVU17F4QW, FFVU17F4QWE LFFH17F3QW, LFFH20F3QM, LFFH20F3QW TFFU20F2QW, TFFU21M1QW, WWFC22M1SW Note: Always verify your full model number before ordering, and check the printed rating on your original run capacitor before installing the new one — see the capacitor voltage note in Product Specifications below. Contact our support team with your model number if you're unsure. Key Features Complete 2-piece kit — compressor start relay and matching run capacitor in one purchase Addresses the two components most commonly found bad together on a clicking-but-not-starting compressor Resolves "won't start cooling," "runs too warm," and "clicking sound from the compressor" symptoms Run capacitor rated 15 µF Both components mount directly to the compressor terminals Direct drop-in replacement for both original components Replaces the full cross-reference set for 297259515 and 297286803 listed above Compatible with Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Kit Part Number 297259515 Kit Contents 1x Compressor Start Relay (297259515), 1x Run Capacitor (297286803) Condition Aftermarket Replacement Capacitor Rating 15 µF Mounting Both components mount directly to the compressor terminals Repair Skill Level Experienced DIYer Quantity 1 kit (1 relay + 1 capacitor) Compatible Brands Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, Westinghouse Note on capacitor voltage: Manufacturer-facing sources disagree on this capacitor's voltage rating — some list it as 15µF/120V, others as 15µF/250V. Before installing, check the voltage printed directly on your original capacitor's body and confirm the new capacitor's printed rating matches or exceeds it. We're not publishing a single voltage figure here rather than risk stating the wrong one — contact our support team if you'd like help confirming the correct rating for your model. Installation Notes ⚠️ Danger — The Run Capacitor Stores A Dangerous Electrical Charge Shut off power to the refrigerator at the outlet before beginning. The run capacitor stores an electrical charge even after power has been disconnected, and that charge can deliver a serious shock. Before touching the capacitor's terminals, discharge it by shorting the two terminals together using an insulated-handle screwdriver, or a proper capacitor discharge tool with a resistor. Never short the terminals with a bare metal tool held with your bare hand. ⚠️ Unplug Refrigerator Before Starting — Both Components Mount To The Compressor Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Shut off the water supply as well if your model has an ice maker or water dispenser. Wear work gloves and safety glasses. Have an assistant help pull the refrigerator away from the wall for access to the rear panel. Locate the compressor in the machine compartment at the back or bottom of the unit, and find the start relay and run capacitor mounted directly to its terminals. Photograph the wiring and orientation of both components before removing anything. After confirming the capacitor is fully discharged, disconnect the old relay and capacitor from the compressor terminals, noting each terminal position. Install the new 297259515 relay and 297286803 capacitor from this kit in the same orientation, seating each firmly onto the correct compressor terminals. Reassemble any panels or retainers you removed, restore the water supply if applicable, and push the refrigerator back into place. Restore power and monitor the refrigerator over the next few hours to confirm the compressor starts reliably and both compartments begin cooling. Tools needed: 1/4" nut driver or socket, 1/2" wrench or adjustable wrench, needle nose pliers, flat-head screwdriver, insulated-handle screwdriver or capacitor discharge tool, work gloves, safety glasses. Frequently Asked Questions Do I really need both the relay and the capacitor, or could just one be bad? Either could technically be the sole cause, but in practice, technicians troubleshooting a compressor that clicks but won't start commonly find both the start relay and run capacitor have failed together — they sit on the same terminals under the same electrical stress every time the compressor cycles. Replacing both at once avoids having to open the compressor compartment a second time if the remaining original part fails shortly after. I hear a repeated clicking sound from the back of my refrigerator, but it's not cooling. Is this the kit I need? Yes, this is a textbook symptom for this exact pair of components. The clicking is the sound of the relay repeatedly attempting to engage the compressor's start winding and failing, often because the run capacitor isn't providing the boost the compressor needs to actually get moving. If both compartments are also warm, that confirms the compressor isn't starting at all. Why doesn't this listing state a single voltage rating for the capacitor? We found genuinely conflicting information across manufacturer-facing sources for this specific capacitor — some list it at 120V, others at 250V — and we'd rather flag that honestly than publish a number we can't fully verify. Before installing, check the rating printed directly on your original capacitor's body, and contact our support team if you'd like help confirming the correct value for your model. My refrigerator stopped suddenly during normal operation. Could this kit be the cause? Yes, a failing run capacitor or start relay can cause a refrigerator to stop suddenly, not just fail to start from cold. If your unit was running fine and then abruptly stopped cooling, checking these two components at the compressor is a reasonable next step alongside checking for tripped breakers or other obvious causes. Is this an OEM or aftermarket kit? This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Frigidaire OEM kit, but each component is manufactured to match the electrical specifications and terminal fit of the original 297259515 start relay and 297286803 run capacitor used in compatible Frigidaire, Kenmore, Crosley, Kelvinator, Gibson, Tappan, and Westinghouse refrigerators and freezers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR07X10131 Refrigerator Compressor Overload Relay The XPARTCO WR07X10131 is an aftermarket replacement compressor start relay and overload, a PTCR combination device, for GE, Hotpoint, Kenmore, and RCA refrigerators. It plugs onto the compressor, helps the compressor start by managing the current it draws at startup, and protects it against overload while it runs. When it fails, the compressor may click but not start, and the refrigerator and freezer stop cooling. This is a direct-fit aftermarket replacement for the original GE part. A failed relay is one of several causes of a compressor that won't run, so confirm the symptoms and test the relay before replacing it. Quick Answer The XPARTCO WR07X10131 Compressor Overload Relay fixes a GE, Hotpoint, Kenmore, or RCA refrigerator whose compressor clicks but won't start, or whose refrigerator and freezer have stopped cooling. Classic symptom: you hear a click from the back of the refrigerator every few minutes, the compressor never runs, and both compartments warm up. Common Problems This Part Fixes Refrigerator and freezer have stopped cooling Compressor clicks but doesn't start Compressor won't start at all Compressor cycles on and off or trips repeatedly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This relay and overload directly replaces the following part numbers: WR07X10131, WR08X10074, WR08X10089, WR08X10111, 197D6266P001, 5SP14A319NF, WR09X10124, AGE27632, AP4538934, AH2577842, EA2577842, EAP2577842, PD00001415, PS2577842 These numbers span several generations of GE's own part numbering for this relay as refrigerator models were updated. Confirm against your refrigerator's parts diagram, or contact our support team, if your model calls out a different number. Compatibility This relay and overload is listed for GE, Hotpoint, Kenmore, and RCA refrigerators, including these examples: GE CNE22SSEAFSS, GNE22GSEAFSS, PFSF2MIYAWW (bottom-mount) GE CTH17RBT2RWW, GTH18CCEHRWW, GTS18HBSFRWW (top-freezer) GE GSH22JGDBBB, GSL25JFXNLB Note: One retailer lists this part for more than 600 models, so the models above are only a sample. GE's catalog page for the original part carries a warning about use with flammable refrigerants such as R600a, so confirm the part against your refrigerator's model number before installing. Contact our support team to verify fit before ordering. Key Features Direct-fit aftermarket compressor start relay and overload (PTCR combo) Helps the compressor start and protects it against overload Resolves no-cooling and clicking-compressor problems caused by a failed relay Fits many GE, Hotpoint, Kenmore, and RCA refrigerators Easy repair with basic hand tools, typically 15 to 30 minutes Product Specifications Part Number XPWR07X10131 OEM Part Number WR07X10131 Part Type Refrigerator Compressor Start Relay and Overload (PTCR Combo) Condition Aftermarket Replacement Location On the Compressor Application GE, Hotpoint, Kenmore & RCA Refrigerators Installation Notes ⚠️ Unplug Power Before Installing Unplug the refrigerator before beginning, and wear work gloves. Pull the refrigerator out and remove the rear access cover to reach the compressor, then disconnect the wire connector and any retaining clip, and pull the old relay straight off the compressor terminals. Push the new relay on in the same orientation, reattach the clip and connector, and replace the cover. Do not touch or disturb the sealed refrigerant lines. Allow the refrigerator several hours to cool after restoring power. Frequently Asked Questions My refrigerator isn't cooling and the compressor clicks. Is this the part I need? A failed start relay and overload is a common cause of a clicking compressor that won't start. With the refrigerator unplugged, you can test the relay for continuity. A failed compressor or a failed run capacitor can look similar. What does this part do? It helps the compressor start by regulating the current sent to it at startup, and it protects the compressor from overload while it runs. Do I need to open the sealed refrigerant system? No. The relay plugs onto the compressor terminals from the outside, and the refrigerant lines are not touched. Will this fit my refrigerator? It is listed for many GE, Hotpoint, Kenmore, and RCA refrigerators, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XP4P-ROLP-120P15 Refrigerator Starter Relay & Overload Protector Refrigerator Compressor Overload Protector PTC Starter Relay Replaces 1.03.01.01.324J, ZHB35-120P15 BEU: This PTC starter relay is specifically designed for refrigerator compressors. It serves as an overload protector and ensures the proper functioning of your refrigerator compressor. The model ZHB35-120P15 BEU guarantees compatibility with your appliance. Description: Easy to install and replace your old part: This PTC starter relay for refrigerator compressor overload protector is designed for easy installation and replacement of your old part. It saves you time and effort in the installation process. Check well before shipment: Each unit of this refrigerator compressor overload protector PTC starter relay is carefully checked before shipment to  for ensure its quality and functionality.  This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO WR07X10097 Refrigerator Compressor Overload Relay – Compatible with GE, Hotpoint, and Kenmore Refrigerators Product Description Restore proper compressor protection and reliable cooling with the XPARTCO WR07X10097 Refrigerator Compressor Overload Relay. This Start Device Assembly is a replacement part for Specific refrigerator models. It is a kit that includes the start relay and overload, both of which are crucial components for the proper operation of the compressor. The start relay is responsible for initiating the compressor's operation by providing an electrical boost to start the motor. The overload, on the other hand, acts as a protective device. It monitors the current flow and protects the compressor from overheating or electrical overload. Replaces Part Numbers WR07X10097, 1265640, AH1766101, EA1766101, PD00008007, EAP1766101, AP4300623, PS1766101. Compatibility This replacement compressor overload relay fits select GE, Hotpoint, and Kenmore refrigerators. Example compatible models include (but are not limited to):GE GTS18HGTHWW, GTS22KGNRWWHotpoint HSS25GFTSAKenmore 363.9557710 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM electrical protection performance 🔌 Compressor Safety Protection – Prevents overheating and electrical overload damage 🔇 Reduces Clicking Issues – Helps resolve start-up clicking or compressor cycling 💰 Cost-Effective Solution – Reliable alternative to OEM parts 🛡️ Fixes Common Issues – Solves compressor not starting, intermittent cooling, or shutdowns 📐 Product Specification Part Number: WR07X10097 Component Type: Refrigerator Compressor Overload Relay Material: Heat-resistant housing with internal thermal protection Mounting: Direct-fit on compressor terminals Function: Overcurrent and overheat protection Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool. Steps: Disconnect power and remove the rear lower access panel. Locate the overload relay attached to the compressor terminals. Carefully disconnect the old relay. Install the new XPARTCO WR07X10097 overload relay securely. Reinstall the access panel and restore power. Allow several minutes for compressor startup. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your refrigerator compressor and restore reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XP61005518 Refrigerator Relay Fits Specific refrigerator Models Replaces Part Numbers: 12002782, 1194680, 61005518, AH2004057, EA2004057, OEM12028982, AP4009659, PS2004057. Description: This is a Replacement compressor overload and relay kit for Specific Whirlpool, Maytag, Kenmore Refrigerator models. Kit was recently redesigned by manufacturer.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO HS810 Refrigerator 3-in-1 Hard Start Kit 1/12 to 1/5 HP 120V The XPARTCO XPHS810 is a universal 3-in-1 hard start kit that combines a solid-state starting relay, a start capacitor, and thermal overload protection into a single prewired unit for refrigerator and freezer compressors rated 1/12 to 1/5 HP at 120V (110–125VAC). It's designed as a direct equivalent to the widely used Supco RCO810 and similar kits, giving a struggling compressor extra starting torque to overcome internal friction and gas pressure at startup — commonly used to fix the classic "click-buzz-click" no-start symptom without replacing the entire compressor. The kit is fully prewired with color-coded leads (typically black = Common, white = Start, red = Run) and mounts directly onto the compressor's terminal pins, with instructions printed on the unit itself. It directly replaces Supco RCO810, URCO810, URC0810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, ERPU810, HS8, HS810, HS81, PCS810, and Mars 32781. Installs in 15–30 minutes with basic hand tools. Quick Answer The XPARTCO HS810 3-in-1 Hard Start Kit fixes refrigerators and freezers whose compressor makes a repeated "click-buzz-click" sound and fails to start, or that shut off on thermal overload during startup. Combines relay, start capacitor, and overload protector in one prewired unit for 1/12 to 1/5 HP compressors, 120V, 3.5A RLA. Replaces Supco RCO810, URCO810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, HS8, HS810, HS81, PCS810, Mars 32781. Do not install on LG linear/inverter compressors — see Installation Notes. Common Problems This Part Fixes Compressor makes a repeated "click-buzz-click" noise and fails to start Refrigerator or freezer runs warm because the compressor won't stay running Compressor hums but doesn't start, then trips off on overload Refrigerator cycles on and off rapidly without reaching temperature Older or worn compressor that starts hard, especially after a power outage ⚠ Capacitor Hazard — Read Before Servicing This kit contains a start capacitor, which can store a dangerous electrical charge even after the refrigerator is unplugged. Always disconnect power before servicing, and discharge the capacitor safely (using an insulated-handle resistor tool or by briefly shorting the terminals with an insulated screwdriver) before handling it. Never touch capacitor terminals with bare hands. If you are not comfortable working around stored electrical charge, have this repair performed by a qualified technician. Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This 3-in-1 hard start kit directly replaces the following OEM and cross-reference part numbers: XPHS810, RCO810, URCO810, URC0810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, ERPU810, HS8, HS810, HS81, PCS810, Mars 32781 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This universal hard start kit is compatible with refrigerator and freezer compressors in the following range: Compressors rated 1/12 HP through 1/5 HP 120V (110–125VAC) single-phase compressors Standard PSC (permanent split capacitor) and RSIR compressor types across Whirlpool, GE, Frigidaire, LG, Samsung, and most other major brands Important: Do NOT install this kit on LG linear/inverter compressors, or any compressor using a variable-speed inverter board (often labeled "Inverter," "Linear," "BLDC," or "Digital"). Connecting a standard hard start kit to an inverter-driven compressor can destroy the inverter control board. Check your compressor's label before ordering, or contact our support team with your model number if you're unsure. Key Features 3-in-1 design combines starting relay, start capacitor, and thermal overload protector in one prewired unit Delivers additional starting torque to help a struggling compressor overcome startup friction and gas pressure Resolves "click-buzz-click," "won't start," and "trips on overload" symptoms on eligible compressors Rated for 1/12 to 1/5 HP compressors at 120V, 3.5A RLA Prewired, color-coded leads with instructions printed on the unit for straightforward installation Can operate with or without an existing run capacitor Replaces Supco RCO810, URCO810, RC0810, RC100, TJ90RCO810, AP4503019, ERP810, HS8, HS810, HS81, PCS810, and Mars 32781 Aftermarket replacement built to OEM-equivalent quality and safety standards Product Specifications Part Number XPHS810 Equivalent To Supco RCO810 / RC0810 Part Type 3-in-1 Refrigerator/Freezer Hard Start Kit (Relay, Capacitor, Overload) Condition Aftermarket Replacement HP Range 1/12 to 1/5 HP Voltage 120V (110–125VAC) Current Rating 3.5A RLA Terminal / Wire Color Code Black = Common (C), White = Start (S), Red = Run (R) — typical; confirm against included diagram Not Compatible With LG linear/inverter compressors Installation Notes ⚠️ Unplug Refrigerator Before Starting — Discharge Capacitor Safely Disconnect power before beginning. Before touching any wiring, check your compressor's data label to confirm it is NOT a linear/inverter/BLDC compressor — this kit is not compatible with those and can damage the inverter board if connected. Access the compressor compartment, typically at the rear or bottom of the unit. Remove the existing relay/overload assembly by gently pulling it straight off the compressor terminal pins — do not force or twist. Use a multimeter to confirm which pins are Common (C), Start (S), and Run (R) if not already labeled. Connect the hard start kit's wires to the matching pins. Wire the kit's main power leads into the refrigerator's supply wiring using wire nuts, following the included diagram. Secure the kit with zip ties or its mounting strap to prevent vibration damage during compressor operation. Restore power and confirm the compressor starts smoothly without repeated clicking. Tools needed: nut driver or screwdriver, digital multimeter, wire nuts, insulated screwdriver (for capacitor discharge). Frequently Asked Questions My compressor makes a clicking or buzzing sound and won't start — will this fix it? A hard start kit resolves this in many cases, especially on older or worn compressors that struggle to overcome internal gas pressure at startup. However, "click-buzz-click" can also indicate a failing compressor winding or a compressor nearing end of life. If the hard start kit doesn't resolve the issue, the compressor itself may need replacement — a hard start kit can extend a marginal compressor's life but can't revive one with failed internal windings. Can I use this on any refrigerator? This kit works on standard PSC and RSIR compressors within the 1/12 to 1/5 HP range at 120V. It is NOT compatible with LG linear/inverter compressors or any variable-speed inverter-driven compressor — connecting it to one of those can destroy the inverter control board. Check your compressor's label for "Inverter," "Linear," "BLDC," or "Digital" before ordering. Do I need to remove my existing start capacitor or relay first? Yes — remove the old relay/overload assembly from the compressor terminal pins before installing this kit. The XPHS810 is designed to work with or without an existing separate run capacitor remaining in the circuit, but the old start relay and any old start capacitor should be removed and replaced by this kit, not left in place alongside it. Is this safe to install myself? Many DIYers install hard start kits successfully, but this repair involves a capacitor that can hold a dangerous electrical charge even after the unit is unplugged, plus correctly identifying compressor terminals. If you're not comfortable working around stored electrical charge or don't have a multimeter to confirm terminal identification, we'd recommend having a qualified technician perform this repair. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

2304099 Refrigerator Defrost Control Board Replaces Part Numbers: WP2304099, 2304099, 1174817, 2213100, 2213473, 2302564, 2303826, OEM24028522, AP6007130, PS11740238. Description: This is a refrigerator control board that can be used to replace a damaged or faulty board in select refrigerators. The control board is used to manage various functions that occur in the refrigerator, including cooling and defrosting. If there is a problem with the board, the refrigerator might not be able to defrost correctly, or it might not stay cool. This control board for the refrigerator tends to last a long time. However, it could eventually wear out and stop working. It could be damaged due to a voltage surge, or it might be a faulty board. Remove and store all food in the refrigerator and unplug it before beginning repairs. This refrigerator control board works with certain models from Kenmore, Whirlpool, KitchenAid, Roper, Estate, Inglis, Crosley, Gladiator, Kirkland, and Maytag.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

Choice DA32-10109Y Refrigerator Temperature Sensor – Replacement for Samsung Product Overview The DA32-10109Y Refrigerator Temperature Sensor is an aftermarket replacement part designed to measure and relay internal temperatures to the control board. A faulty sensor can lead to cooling problems, temperature fluctuations, or improper defrost cycles. Replacing a worn sensor with this reliable component helps restore accurate temperature readings and optimal cooling performance in your refrigerator. 8-1/4" overall length with two pin plug for freezer. Fits Samsung SXS refrigerator models. Replaces Part Numbers This sensor replaces part numbers DA32-10109Y, AP4136950, PS4138703. It is engineered to match the fit and functionality of the original Samsung sensor. Compatible Brands Compatible with many Samsung and Kenmore refrigerators manufactured by Samsung. Fits French door, bottom-freezer, and side-by-side models that use this temperature sensor. Fixes the Following Issues Refrigerator not cooling properly Freezer too warm or too cold Temperature reading errors Inconsistent cooling or defrost operation Why Buy from Parts‑O‑Matic Affordable and dependable aftermarket part Fast and free U.S. shipping Easy to install – no special tools required Trusted by appliance techs and DIYers

Read more less

3405-001117 Genuine OEM Refrigerator Dispenser Control Switch - Compatible with Samsung Product Description Restore your refrigerator’s dispenser functionality with the 3405-001117 Genuine OEM Refrigerator Dispenser Control Switch. This Samsung-manufactured microswitch is designed for select Samsung refrigerators, controlling the activation of the water and ice dispenser mechanism. It ensures reliable dispensing, addressing issues like unresponsive or intermittent water/ice dispensing for a seamless user experience. Note: Includes (1) dispenser control microswitch. Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 3405-001117, DA34-00011A, 110634, 3727507, PD00033242, EAP11712663, AP5962465, PS11712663. Compatibility: Compatible with select Samsung refrigerator models, including but not limited to: Samsung: RS2530BBP, RS2530BSH, RS2530BWP, RS2555BB, RS2555SL, RS2555SW, RS2577BB, RS2577SL, RS2577SW, RS2630SH, RS2630WW, RS265LABP, RS265LAWP, RS277ACBP, RS277ACPN, RS277ACWP Common models: Samsung RS253BABB, RS253BAVQ, RS255BABB, RS255BASB, RS257BARB Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung refrigerators with water and ice dispensers. 🔧 Specifications: Genuine OEM Samsung microswitch, single-pole, double-throw (SPDT), 0.1A, 125/250V. 💪 Reliable Performance: Ensures precise activation of the water and ice dispenser mechanism. 🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves unresponsive or intermittent water/ice dispensing issues. Product Specification Part Number: 3405-001117 Component Type: Refrigerator dispenser control switch Material: Durable plastic housing with metal contacts Operating Conditions: 0.1A, 125/250V, suitable for refrigerator dispenser environments Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator’s dispenser working smoothly today! Add to cart now for a reliable fix!

Read more less