Search results for "refrigerator water inlet valve"

W10341320 (OE) Refrigerator Water Inlet Valve The W10341320 (OE) is an Original Equipment (OE) replacement dual secondary water inlet valve compatible with a wide range of Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators. This dual-solenoid valve controls water flow to two destinations — the refrigerator's water dispenser and the ice maker. Each solenoid opens independently when the control board calls for water at that destination, and closes the moment the call is dropped. When one or both solenoids fail, you lose water at the dispenser, ice production stops or slows, or the valve begins leaking at its connections. Rated 110/120V, 50/60Hz. Dual solenoid: W1 = 20W, W2 = 35W. Important: this is the SECONDARY valve, not the primary water inlet valve — many Whirlpool side-by-side refrigerators use both, and if your primary valve is working fine but you're still losing water or ice, the secondary valve is the likely culprit. It directly replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032. Common repair for leaks at the valve connections. Installs in about 30 minutes with basic hand tools and novice repair experience. Quick Answer The W10341320 (OE) Refrigerator Water Inlet Valve fixes Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, and Kenmore side-by-side refrigerators with no water through the door, an ice maker that won't make ice or makes too little ice, or leaking at the valve connections. Dual secondary valve — dual solenoid (W1=20W, W2=35W), 110/120V, 50/60Hz. Original Equipment (OE) — same design and performance as the factory part, without the OEM label. Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, K-78032. This is the SECONDARY valve — not the primary water inlet valve (W10238100). Common Problems This Part Fixes No water dispensing through the door — dispenser solenoid failed Ice maker not making ice — ice maker solenoid failed Ice maker dispensing too little ice — solenoid partially failed or restricted Water leaking from the valve or its connections Water dispenser works but ice maker doesn't (or vice versa) — one of the two solenoids has failed Weak or slow water flow at the dispenser Ice cubes coming out hollow, small, or misshapen from insufficient water fill Valve buzzing or humming without opening Primary valve tests fine but the refrigerator still won't dispense water or make ice Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dual secondary water inlet valve directly replaces the following OEM and cross-reference part numbers: W10341320, WPW10341320, AP6019939, AWP49977, PD00004978, PS11753250, EAP11753250, 1937969, K-78032 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: the primary water inlet valve on many of these refrigerators is a different part (W10238100 / WPW10238100) — see the FAQ below on primary vs secondary valves. Compatibility This dual secondary water inlet valve is compatible with select side-by-side refrigerators from the following brands: Whirlpool side-by-side refrigerators — select models (verify with parts diagram) Maytag side-by-side refrigerators — MSB26C6MDE00/DE02, MSB26C6MDH00/DH02, MSB26C6MDM00/DM02, MSB27C2XAB00, MSB27C2XAM00, MSB27C2XAW00, MSC21C6MDM00/DM02, MSC21C6MEZ00, MSC21C6MFZ00, MSS26C6MEZ00, MSS26C6MFB00/FB01, MSS26C6MFW00 and related models Jenn-Air side-by-side refrigerators — JSC23C9EEM00, JSC24C8EAM00/AM01/AM02 and related models KitchenAid side-by-side refrigerators — select models Amana, Magic Chef, Admiral, Norge, Roper side-by-side refrigerators — select Whirlpool-built models Kenmore / Sears side-by-side refrigerators — select Whirlpool-built models Important — This Is the SECONDARY Valve, Not the Primary: Many Whirlpool-platform side-by-side refrigerators use TWO water inlet valves: a primary valve (typically W10238100 / WPW10238100) where the household water line enters the refrigerator, and this dual secondary valve (W10341320) that splits flow between the dispenser and the ice maker. If your primary valve is functioning correctly but you're still not getting water or ice, the secondary valve is the likely culprit. Before ordering, confirm which valve your refrigerator's parts diagram calls for at the position you're replacing. Contact our support team with your model number if you're unsure. Key Features Original Equipment (OE) replacement — produced to the same design and performance standards as the factory part but not sold under the appliance brand's OEM label; provides the same fit and function at a more affordable price Dual secondary water inlet valve — supplies water to both the refrigerator's water dispenser and the ice maker Dual-solenoid design: each solenoid opens independently when the control board calls for water at that destination Electrical specs: 110/120V, 50/60Hz · W1 = 20W, W2 = 35W Resolves "no water through door," "ice maker doesn't make ice," "too little ice," and "leaking at connections" symptoms Common fix for leaks at the valve's water line connections Replaces WPW10341320, AP6019939, PS11753250, EAP11753250, 1937969, and K-78032 Compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators Note: this is the SECONDARY valve — the primary water inlet valve is a different part (W10238100) DIY repair — installs in about 30 minutes with basic hand tools and novice repair experience Product Specifications Part Number W10341320-OE Designation OE (Original Equipment) OEM Part Number WPW10341320 Part Type Refrigerator Dual Secondary Water Inlet Valve Condition OE Replacement Application Side-by-Side Refrigerators (Whirlpool platform) Valve Position SECONDARY (not the primary inlet valve) Solenoids Dual — W1 = 20W, W2 = 35W Voltage 110/120V Frequency 50/60 Hz Supplies Water To Water dispenser + Ice maker Related Part Primary Water Inlet Valve (W10238100 / WPW10238100, sold separately) Compatible Brands Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Kenmore Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Supply Before Starting — Wear Work Gloves Unplug the refrigerator (or shut off the house circuit breaker for the appliance) and turn off the refrigerator's water supply at the shutoff valve before beginning. Wear work gloves to protect your hands. Safely store any food that could spoil during the repair. Have towels ready — residual water remains in the lines and will spill when disconnected. Pull the refrigerator away from the wall to access the rear. The secondary water inlet valve is typically mounted at the back of the refrigerator, downstream of the primary valve where the household water line enters. Photograph the water line and wire harness connections before disconnecting anything — with two solenoids and multiple water lines, correct reconnection matters. Disconnect the water lines from the valve (use a 1/2" wrench where needed) and catch any residual water with a towel. Disconnect the electrical connectors from both solenoids. Remove the mounting screws holding the valve bracket in place and lift out the old valve. Install the new W10341320 (OE) valve in the same position and orientation, secure the mounting hardware, and reconnect the water lines — tighten fittings snugly without over-torquing. Reconnect the electrical connectors to the correct solenoids, matching your photos. Turn the water supply back on and check every connection for leaks BEFORE pushing the refrigerator back into place. Restore power. Run water through the dispenser for a few minutes to purge air from the lines, and discard the first few batches of ice. Tools needed: Multi-screwdriver, 1/2" wrench, nut driver, towels, work gloves. Frequently Asked Questions What does "OE" mean and how is it different from Genuine OEM? OE (Original Equipment) parts are produced to the same design and performance standards as the original factory part, but they are not sold under the appliance brand's OEM label. They provide the same fit and function as the OEM part at a more affordable price. The W10341320 (OE) water inlet valve matches the electrical specifications (110/120V, 50/60Hz, dual solenoid W1=20W / W2=35W), dual-secondary valve design, connections, and physical fit of the original Whirlpool OEM part, and installs identically. The main difference from a Genuine OEM Whirlpool part is the branding and warranty — the OE version delivers equivalent performance without the OEM price premium. What's the difference between the primary and secondary water inlet valve? Many Whirlpool-platform side-by-side refrigerators use two water inlet valves working in series. The primary valve (typically W10238100 / WPW10238100) is where the household water supply line first enters the refrigerator — it's the main gatekeeper for water entering the appliance. The secondary valve (this W10341320) sits downstream and splits that flow between the water dispenser and the ice maker via its two independent solenoids. Both can fail independently. The key diagnostic: if the primary valve is working correctly (water is reaching the refrigerator) but you're still not getting water at the dispenser or ice from the ice maker, the secondary valve is the likely culprit. Check your model's parts diagram to confirm which valve you need. My water dispenser works but the ice maker doesn't — can this still be the valve? Yes, absolutely. This is a dual-solenoid valve — one solenoid feeds the water dispenser, the other feeds the ice maker. They fail independently. If your dispenser works fine but the ice maker isn't getting water (no ice, or hollow/small cubes), the ice maker solenoid on this valve may have failed while the dispenser solenoid still works. The reverse is also true. Before replacing the valve, also verify the ice maker itself is turned on (check the wire signal arm position) and that the water line to the ice maker isn't frozen or kinked — those produce similar symptoms. Is this a common fix for leaks? Yes — leaks at the water inlet valve's connections are one of the most common reasons this part gets replaced. Over time, the valve body or its fittings can develop cracks or the internal seals can degrade, producing a slow drip that pools behind or under the refrigerator. If you've found water behind your fridge and traced it to the valve area, replacing the valve typically resolves it. When installing the new valve, tighten the water line fittings snugly but don't over-torque them — over-tightening can crack the fitting and create a new leak. Always check all connections for leaks before pushing the refrigerator back against the wall. Should I flush the water lines after installing the new valve? Yes. After the new valve is installed and the water supply is restored, run water through the dispenser for several minutes to purge trapped air from the lines — air pockets cause sputtering and inconsistent flow. Also discard the first two or three batches of ice the ice maker produces, since they may contain air, debris, or residual manufacturing material from the new valve. After that, water and ice should return to normal quality and flow. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ OE (Original Equipment) Quality ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

MJX41869202 Refrigerator Genuine LG Water Inlet Valve Genuine LG refrigerator water inlet valve designed to control water flow to the ice maker and water dispenser. ✓ Genuine LG Part ✓ Replaces MJX41869202 ✓ Compatibility Support Product Description The MJX41869202 Refrigerator Genuine LG Water Inlet Valve controls the flow of water into compatible LG refrigerators. This valve supplies water to the ice maker and water dispenser when called by the appliance. Replacing a faulty refrigerator water valve can help fix water supply issues, leaking, no ice production, or dispenser flow problems. Quick Answer If your refrigerator is not making ice, the water dispenser is not working, or water is leaking near the valve area, the MJX41869202 water inlet valve may need replacement. ⚠️ Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. Common Problems This Part Fixes Refrigerator not making ice Water dispenser not working Slow or no water flow Water leaking from valve area Faulty refrigerator water inlet valve Replaces part Number MJX41869202, 2646397, 5221JB2010J, 5221JB2010L, 5221JB2010Q, MJX41869209, EAP6448332, ALG1106453, AP5666281, PD00005216, PS6448332. Compatibility This genuine LG part fits select LG, Kenmore, and compatible refrigerator models using part number MJX41869202. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. Key Features Genuine LG refrigerator water inlet valve Controls water flow to dispenser and ice maker Helps restore proper water supply Designed for compatible refrigerator models Reliable OEM replacement component Product Specifications Brand LG Part Type Refrigerator Water Inlet Valve Primary Part Number MJX41869202 Compatible Appliance Type Refrigerator Condition Genuine New Installation Disconnect power and shut off the water supply before installation. Inspect water lines, fittings, and connections for leaks after installation. Troubleshooting Guide ⚠️ Disconnect power and shut off water supply before servicing the refrigerator. Check the water supply line for kinks or restrictions. Inspect the valve area for leaks or damaged fittings. Verify the refrigerator water filter is not clogged. Replace the water inlet valve if water flow problems continue. When Should You Replace This Part? Replace the refrigerator water inlet valve if the ice maker is not filling, the water dispenser has weak or no flow, or water is leaking from the valve area. Shop With Confidence We are a U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock parts for major appliance brands and ship quickly from our U.S. warehouse. ✓ Fast Shipping ✓ Genuine Parts ✓ Compatibility Support ✓ Secure Checkout ```

Read more less

AJU34125552 Genuine OEM LG Refrigerator Water Inlet Valve The AJU34125552 is a genuine LG OEM water inlet valve for LG refrigerators, supplying water to both the ice maker and the door water dispenser from a single valve assembly. Mounted at the rear of the refrigerator where the household water supply line connects, this valve opens on command from the control board to admit water for either feature, and closes again once the request is satisfied. Common causes of failure include mineral and sediment buildup from hard water interfering with the internal solenoid over time, and general electrical wear. A failing valve typically shows up as the ice maker no longer producing ice, the water dispenser slowing down or stopping entirely, or both symptoms appearing together since one valve serves both functions. Quick Answer The AJU34125552 Genuine OEM LG Refrigerator Water Inlet Valve fixes LG refrigerators where the ice maker stopped making ice, the water dispenser isn't working, water flow is slow, or there's a leak near the valve at the back of the refrigerator. Supplies both the ice maker and dispenser from one valve. Common Problems This Part Fixes Ice maker has stopped making ice, or is producing less ice than usual Water dispenser on the refrigerator door isn't working or has slowed down Both the ice maker and water dispenser affected together Slow water flow at the dispenser Water leaking near the valve at the back of the refrigerator No water or ice production at all Valve failure following known hard water conditions at the home Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers AJU34125552, EAP10066440, FIX10066440, OEM17872815, PS10066440, AP5957602, ALG1274937, PD00053838. We were not able to confirm additional cross-reference or superseding part numbers for this specific part number from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order. Compatibility This water inlet valve is compatible with select LG refrigerators. Note: A specific verified compatible model list was not available at the time this page was built. LG has used several visually similar water inlet valve part numbers across different refrigerator platforms, and parts that look identical can have small but important differences. Always verify your full model number before ordering. Contact our support team with your model number and we will confirm fitment before you purchase. Key Features Genuine LG OEM part — factory-specified solenoid design and flow-rate calibration Single valve assembly supplies water to both the ice maker and door water dispenser Resolves "ice maker not making ice," "dispenser not working," "slow water flow," and "leak near the valve" symptoms caused by valve failure Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair — typically 15 to 30 minutes Product Specifications Part Number AJU34125552 Part Type Refrigerator Water Inlet Valve (Ice Maker + Dispenser) Condition Genuine OEM Brand LG Location Rear of refrigerator, at the household water line connection Function Supplies water to the ice maker and door water dispenser Repair Difficulty Easy — 15 to 30 minutes Quantity 1 valve assembly Compatible Brand LG Installation Notes ⚠️ Unplug Refrigerator Before Starting — Store Perishable Food Separately Shut off the water supply and unplug the refrigerator before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear of the cabinet where the water supply line connects. Photograph the wiring harness and water line connections before disconnecting anything. On some installations, the wiring harness has been routed between water supply lines, which can make the connector difficult to reach and unplug — if this is the case, gently reposition or loosen a water line first rather than forcing the connector. Disconnect the water supply line from the old valve, disconnect the electrical connector, and remove the mounting screws holding the valve in place, then pull it free. Install the new AJU34125552 in the same position, secure the mounting screws, and reconnect the electrical connector fully — route the wiring the same way the original was routed, avoiding pinch points against the water lines if possible. Reattach the water supply line, tightening securely by hand plus a partial turn with pliers. Restore the water supply and check for leaks before restoring power. Push the refrigerator back into place and test both the ice maker and water dispenser over the following day to confirm normal operation. Tools needed: Phillips screwdriver, adjustable wrench or pliers, work gloves. Frequently Asked Questions My ice maker and dispenser both stopped working at the same time. Is that normal for a valve failure? Yes, this is actually a very telling symptom. Because one valve assembly supplies water to both the ice maker and the door dispenser, a failure inside the valve itself commonly affects both functions simultaneously. If only one of the two has stopped working while the other functions normally, it's worth double-checking the water filter and supply line for a localized restriction before assuming the valve has failed, but a simultaneous failure of both points strongly toward this valve. The wiring harness on my old valve was hard to reach. Is that normal? It can be, depending on how the original installation routed the wiring. Some installations run the harness between two water supply lines, which can make the connector awkward to access and unplug. If you find yourself in this situation, gently repositioning or loosening a nearby water line first — rather than forcing the connector — makes it much easier to disconnect without damaging anything. Could hard water be why my valve failed? Yes, this is a common and well-documented cause. Mineral deposits from hard water can build up inside the valve over time and interfere with the internal solenoid's ability to open and close properly, eventually leading to failure. If you know your home has hard water and this valve has failed, it may be worth considering a water softener or more frequent filter changes to extend the life of the replacement. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It includes the same solenoid design and dual-function (ice maker and dispenser) configuration as the water inlet valve originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP 218832401 Refrigerator Water Inlet Valve Replaces Part Numbers: 218832401, 452252, AH429001, EA429001, AP2115312, PS429001.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

WR57X25917 Refrigerator Genuine OEM Water Valve Fits Specific GE Refrigerator Models. Double Water inlet Valve Replaces part Numbers: WR57X25917, 4547034, AP5999527, PS11729575. Description:  The Water Valve is a Genuine OEM component specifically designed for GE refrigerators with ice makers. Located inside the freezer compartment, it controls the flow of water to the icemaker assembly.

Read more less

XPARTCO W10238100 Refrigerator Water Valve - Compatible with Whirlpool, KitchenAid, Maytag, JennAir, Kenmore, IKEA Product Description Restore your refrigerator’s ice and water dispensing functionality with the replacement XPARTCO W10238100 Refrigerator Water Valve. This replacement part is designed for select Whirlpool, KitchenAid, Maytag, JennAir, Kenmore, and IKEA refrigerators, providing reliable water flow control for the ice maker and water dispenser. It resolves issues like no ice production, no water dispensing, poor water flow, or leaks, offering a cost-effective alternative to OEM parts. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: WPW10238100, W10238100, W10498992, IMV-8100, K-78199, PD00002616, EAP11750831, AP6017532, PS11750831. Compatibility: Compatible with models including but not limited to: Whirlpool: GSC25C4EYB02, GSS30C6EYY01, WSF26D4EXB00, WRF560SEHW00, WRF560SEHZ00, WRS526SIAH00 KitchenAid: KSF26C4XYB00, KSF26C6XYY05, KRSC503ESS01, KRFF300EBS01 Maytag: MSB26C6MDM00, MSB27C2XAB00, MFW2055DRE01 JennAir: JFI2089WES Kenmore: 10651764510, 10651789414, 10651133210 IKEA: ISC23CDEXB00 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, KitchenAid, Maytag, JennAir, Kenmore, and IKEA refrigerators. 🔥 Specifications: Single solenoid water inlet valve with electrical connectors, 5/16" push-in to connect outlet, and 1/4" compression inlet. 💰 Cost-Effective Alternative: Matches OEM performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, wrench, pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no ice, no water dispensing, poor water flow, or water leaks. Product Specification Part Number: XPARTCO W10238100 Component Type: Refrigerator water inlet valve Material: Plastic housing, metal fittings, electrical connectors Mounting: Secures to refrigerator frame with screws Operating Conditions: Suitable for refrigerator water systems; 20W, 120V coil Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from power and water sources before installation. Follow the owner’s manual for guidance. Use plumber’s tape on threaded connections to prevent leaks. See Installation Guide.

Read more less

WPW10238100 Refrigerator Genuine OEM Water Valve Replaces Part Numbers: WPW10238100, W10238100, W10498992, AP6017532, PS11750831. Description: This Genuine OEM Part is a single water inlet valve designed for use in select Whirlpool refrigerator models. Its key function is to supply water to the refrigerator's ice maker and water dispenser. When energized, this valve releases water from the supply line into the ice mold. If the water valve develops a crack, it will need replacement. The valve accommodates two different sizes of tubing: the smaller inlet measures 1/4", and the larger inlet measures 5/16".

Read more less

XPARTCO W10498976 Refrigerator Water Inlet Valve Replaces WPW10498976 The XPARTCO W10498976 is an aftermarket replacement refrigerator water inlet valve assembly compatible with select Whirlpool, Maytag, KitchenAid, Kenmore, and Ikea bottom-freezer and French door refrigerators in the WRB, WRF, MBF, GX5, GB9, GB2, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the refrigerator that controls the flow of water from the household supply line to the ice maker and, on models with a door dispenser, to the water dispenser. When the solenoid coil burns out or the valve seat becomes clogged with mineral deposits, the ice maker stops producing ice, the water dispenser stops working, water trickles weakly, or water leaks from the valve body. Rated 120V, 50/60Hz, 35W solenoid, this valve measures 3-1/2"L x 2-3/4"W x 3"H and includes the valve body and mounting bracket. It connects via 1/4" inlet fitting to the household supply line and uses push-in tube fittings on the outlet side. It directly replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, 2315508, IMV-576, AP6022334, EAP11755667, PD00024636, PS11755667, WP2315576, and WV8047. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO W10498976 Refrigerator Water Inlet Valve fixes Whirlpool-family bottom-freezer and French door refrigerators where the ice maker is not making ice, the water dispenser is not working or producing only a trickle, or water is leaking from the back of the refrigerator. 120V/50-60Hz/35W solenoid, 3-1/2"L x 2-3/4"W x 3"H, includes bracket. 1/4" inlet connection. Replaces WPW10498976, W10420082, W10498974, K-78200, 2684516, AP6022334, PS11755667. Compatible with Whirlpool WRB/WRF, Maytag MBF, KitchenAid, Kenmore, and Ikea. Common Problems This Part Fixes Ice maker not producing ice or producing very small cubes due to insufficient water supply Water dispenser not working — no water flows when the lever or button is pressed Water dispenser producing only a trickle — valve partially blocked or solenoid weakening Water leaking from behind the refrigerator near the water valve Ice maker fills but overflows — valve stuck open and not closing properly Humming sound near the back of the refrigerator when requesting ice or water — solenoid energized but valve not opening No water reaching the refrigerator despite supply line being connected and pressurized Replaces Part Numbers This water inlet valve directly replaces the following OEM and cross-reference part numbers: WPW10498976, W10498976, W10420082, AWP50873, EAP11755667, PD00024636, AP6022334, PS11755667.  If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water inlet valve is compatible with select bottom-freezer and French door refrigerators from the following brands and series: Whirlpool refrigerators — WRB322, WRB329, WRF535, WRF555, and related WRB/WRF series (French door and bottom-freezer models) Maytag refrigerators — MBF1958, MBF2258, and related MBF series KitchenAid refrigerators — select bottom-freezer and French door models Kenmore / Sears refrigerators — select Whirlpool-built models Ikea refrigerators — select models (Whirlpool-built) Other Whirlpool-platform models including GB9, GB2, GX5, GX2, ET1CH, ET8CH, IX5HH, ED22, and related series Note: Always verify your exact model number before ordering — water inlet valves are model-specific and not universal across all refrigerator configurations. Check that the supply line connection size (1/4") matches your existing supply line before purchasing. Key Features Solenoid-operated valve — opens on command from the refrigerator's control board to supply water to the ice maker and water dispenser Rated 120V, 50/60Hz, 35W — correct electrical specifications for compatible Whirlpool-family refrigerators Dimensions: 3-1/2"L x 2-3/4"W x 3"H — includes mounting bracket for direct installation 1/4" inlet connection — matches standard residential refrigerator supply line diameter Push-in outlet tube fittings — easy connection to existing water supply tubing inside the refrigerator Plastic and metal construction — durable and resistant to mineral buildup Replaces WPW10498976, W10420082, W10498974, K-78200, K-78186, 2684516, AP6022334, and over 10 additional cross-references Compatible with Whirlpool WRB/WRF series, Maytag MBF series, KitchenAid, Kenmore, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number W10498976 OEM Part Number WPW10498976 Part Type Refrigerator Water Inlet Valve Assembly Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 120V AC Frequency 50/60 Hz Solenoid Wattage 35W Dimensions 3-1/2"L x 2-3/4"W x 3"H Inlet Connection 1/4 inch Color Brown / Blue / Yellow / Gray Material Plastic / Metal Includes Water valve body and mounting bracket Compatible Brands Whirlpool, Maytag, KitchenAid, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the household water supply valve before beginning. Place a towel and small container under the valve area to catch residual water. Pull the refrigerator away from the wall to access the back lower panel — remove the panel screws to expose the water inlet valve. Photograph the wiring harness connections and water tube connections before disconnecting. Turn off the water supply and disconnect the 1/4" supply line from the valve inlet — use an adjustable wrench, as some compression fittings may be stuck. Squeeze the plastic retaining clips on the outlet tube fittings and pull the internal water tubes free. Disconnect the wiring harness. Unscrew the mounting bracket and remove the old valve. Install the new W10498976 valve with its bracket, reconnect the internal water tubes (push until they click), reconnect the wire harness and supply line. Restore water supply and power. Run a water dispenser test and check for leaks. Tools needed: Phillips screwdriver, adjustable wrench, needle-nose pliers. Frequently Asked Questions What does the refrigerator water inlet valve do? The water inlet valve is an electrically controlled solenoid valve that opens on command from the refrigerator's control board to allow household water pressure to push water through to the ice maker fill tube or the water dispenser. When the ice maker calls for water or you press the dispenser lever, the board sends voltage to the solenoid coil, which opens the valve. When the demand is satisfied, the voltage stops, the spring closes the valve, and water flow stops. A failed solenoid coil — or a valve seat clogged with mineral deposits — prevents the valve from opening or closing correctly, causing no water, weak water, overflow, or dripping. What is the difference between W10498976 and WPW10498976? These are the same water inlet valve. WPW10498976 is the updated Whirlpool OEM part number that superseded the original W10498976. The W10420082 and W10498974 are also cross-references for this same valve from earlier production runs. This aftermarket replacement is compatible with all of these numbers. How do I know if the water inlet valve has failed vs. something else? First confirm the household water supply valve behind the refrigerator is fully open and the supply line is not kinked. Then check the water filter — a clogged filter is one of the most common causes of weak or no water flow and is mistaken for a valve failure. If both supply pressure and the filter are good, test the valve's solenoid coil with a multimeter — a working coil reads 200–500 ohms of resistance; an open circuit confirms failure. If the solenoid tests good but the valve still does not open when the control board sends voltage, the valve seat may be physically clogged with mineral deposits and the valve needs to be replaced. My ice maker is not working but my water dispenser is fine — is it the valve? Possibly — but if the water dispenser works normally, the main valve solenoid is likely functioning. On some refrigerator configurations, the ice maker and the dispenser are controlled by separate solenoid ports on the valve assembly. If only the ice maker port has failed, the dispenser can continue working while ice production stops. Test the ice maker solenoid coil separately. However, a more common cause of ice maker failure with a working dispenser is the ice maker module, freezer temperature, or ice maker shut-off arm — rule out those causes before replacing the valve. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from plastic and metal to match the electrical specifications and dimensions of the original WPW10498976 water inlet valve assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR57X33326 Refrigerator OE Water Valve – Compatible with GE, Hotpoint, and Crosley Refrigerators Product Description Restore proper water and ice dispensing with the XPARTCO WR57X33326 Refrigerator OE Water Valve. This high-quality OE (Original Equipment) replacement regulates water flow from your home supply to the ice maker and dispenser. A worn or leaking valve can cause reduced ice production, no water dispensing, or unwanted drips. This OE-grade part delivers the same performance, fit, and reliability as the factory original — at a better value. What is OE ?: “OE (Original Equipment) parts are manufactured to meet the same specifications, materials, and performance standards as the original factory-installed components. XPARTCO parts are engineered to provide equivalent fit and function to OEM components while offering reliable quality at a competitive price.” Replaces Part Numbers WR57X33326, WR57X10032, WR32X10032, WR57X10040, WR57X10064, PD00063637, AP6995571, PS16226572, WR57X10051, WR57X10012, 1032629, IMV-513, IMV513, WR02X10105, WR2X10105, WR57X0092, WR57X0098, WR57X0099, WR57X0104, WR57X0111, WR57X0119, WR57X10010, WR57X10018, WR57X10018E, WR57X10051-25PK, WR57X104, WR57X111, WR57X119, WR57X92, WR57X98, WR57X99, AH901314, EA901314,  AP3672839, PS901314. Compatibility This OE water valve is compatible with select GE, Hotpoint, and Crosley refrigerators. Example compatible models include (but are not limited to): GE GSS25GSHRCSS, GE GFE29HSDASS, and Hotpoint HSS25IFMDWW. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 OE Replacement – Matches the performance and fit of the original factory part 💧 Consistent Water Flow – Controls water supply to the dispenser and ice maker 💰 Reliable Value – OE quality at a lower cost than OEM retail pricing 🛠️ DIY Installation – Installs easily with standard household tools 🛡️ Fixes Common Issues – Resolves leaks, no-ice, or water-dispensing failures 📐 Product Specification Part Number: WR57X33326 Component Type: Refrigerator Water Inlet Valve Material: Reinforced plastic with dual solenoid control Mounting: Direct-fit replacement located on rear refrigerator panel Operating Conditions: Designed for standard household water pressure Compliance: OE (Original Equipment) quality – same form, fit, and function as OEM 🛠️ Installation Notes Tools Needed: Phillips screwdriver, adjustable wrench, pliers ⚠️ Safety First: Unplug refrigerator and turn off water supply before beginning repairs. Steps: Disconnect refrigerator from power and shut off water supply. Remove rear access panel to expose the valve assembly. Detach inlet tubing and wiring connectors from the old valve. Unscrew and remove the defective valve. Mount the new XPARTCO WR57X33326 valve in place, reconnect wiring and hoses. Reinstall the access panel, turn on water and power, then test dispenser and ice maker. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Bring your refrigerator’s water system back to life — Add to Cart Now for an OE-quality replacement built to last!

Read more less

W10865826 Refrigerator Water Valve - Compatible with Whirlpool, KitchenAid, Maytag, JennAir, Kenmore Product Description Restore your refrigerator’s ice and water dispensing functionality with the replacement W10865826 Refrigerator Water Valve. This replacement part is designed for select Whirlpool, KitchenAid, Maytag, JennAir, and Kenmore refrigerators, ensuring precise water flow control for the ice maker or water dispenser. It resolves issues like no ice production, no water dispensing, or leaks, offering reliable performance and durability. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: W10865826, W10394076, WPW10394076, 4459687, W10726788, W10833705, W10872966, PD00041363, EAP11738056, AP6026312, PS11738056.  Compatibility: Compatible with models including but not limited to: Whirlpool: WRF736SDAM, WRF767SDHZ, WRX986SIHZ, KRFF507HPS KitchenAid: KRMF706ESS Maytag: MFI2570FEZ JennAir: JFX2897DRM Kenmore: 10651753710 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, KitchenAid, Maytag, JennAir, and Kenmore refrigerators. 🔥 Specifications: Water inlet valve with solenoid, electrical connectors, and water line fittings. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, wrench, pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no ice, no water dispensing, or water leaks. Product Specification Part Number: W10865826 Component Type: Refrigerator water inlet valve Material: Plastic housing, metal fittings, electrical connectors Mounting: Secures to refrigerator frame with screws Operating Conditions: Suitable for refrigerator water systems Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from power and water sources before installation. Follow the owner’s manual for guidance. Use plumber’s tape on threaded connections to prevent leaks. Shop for high-quality replacement appliance parts with a 30-day return policy. Fix your refrigerator today! Add to cart now for a reliable solution!

Read more less

242252702 Genuine OEM Frigidaire Refrigerator Water Valve The 242252702 is a genuine Frigidaire OEM triple-solenoid water inlet valve assembly for Frigidaire, Electrolux, Kenmore, Crosley, and White-Westinghouse side-by-side refrigerators. This valve is the central control point where your home's water supply connects to the refrigerator, and it manages water flow to both the ice maker and the door-mounted water dispenser through three separate solenoids housed in one assembly, each opening independently depending on what's being called for. Rated 120V, 50/60Hz per solenoid (20W maroon, 20W yellow, 35W green — each solenoid's wire is color-coded), this valve has 4 outlets total: one 1/4" tube inlet, three 5/16" tube outlets, and one 1/4" tube outlet. It measures approximately 7-1/8"L x 3-3/4"W x 3-1/4"H and ships as a complete assembly with mounting bracket and installation instructions. This valve directly replaces the older 241734302 design and uses updated quick-connect fittings in place of the older screw-on style. A failing valve typically shows up as the ice maker or dispenser not working, slow water flow, or — notably — an overflowing ice maker caused by the valve not shutting off completely if household water pressure is too low. It directly replaces 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 7241734301, WV2702, 2692163, AP5671757, EAP7784018, PD00000153, PS7784018, and K-76150. Quick Answer The 242252702 Genuine OEM Frigidaire Refrigerator Water Valve fixes Frigidaire, Electrolux, Kenmore, Crosley, and White-Westinghouse side-by-side refrigerators where the ice maker or water dispenser isn't working, water flow is slow, or the ice maker is overflowing. Triple-solenoid, 4-outlet valve assembly with bracket. Replaces 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 7241734301, WV2702, 2692163, AP5671757, EAP7784018, PD00000153, PS7784018, K-76150. This valve needs at least 20 psi of household water pressure to shut off completely — if pressure is too low, the valve can leak and cause the ice maker to overflow even when the valve itself is functioning correctly. Common Problems This Part Fixes Ice maker has stopped making ice, or is producing less ice than usual Water dispenser on the refrigerator door isn't working or has slowed down Ice maker overflowing or leaking Slow water flow at the dispenser Water leaking near the valve at the back of the refrigerator Error code related to the water system displayed on some models Cracked or physically damaged valve housing Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator water valve directly replaces the following OEM and cross-reference part numbers: 242252702, 240321801, 240505101, 240505102, 240508101, 240508102, 240531101, 241734301, 241734302, 2692163, 7241734301, PD00000153, EAP7784018, AP5671757, AFR15932, PS7784018 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This water valve is compatible with select Frigidaire side-by-side refrigerators, and also fits select Electrolux, Kenmore, Crosley, and White-Westinghouse refrigerators built on the same platform, including model numbers such as: BFHS2611LM, BFHS2611LM0 BGHS2634KE0, BGHS2634KE1, BGHS2634KP0, BGHS2634KP1, BGHS2644KF0, BGHS2644KF1 FFSS2615TS0, FFSS2615TE4, FFHS2611PFEA, FFHB2750TD5, FRSS26L3AF0 FRS26H5ASB4, FRS26H5ASB5, FRS26H5ASB8, FRS26H5ASBA, FRS26R2AW6, FRS26R4AW5, FRS26R4CB1, FRS26RLECS0, FRS26LF7DS7 FRS6LR5EB3, FRS6LR5EB6, FRS6LR5EM2, FRS6LR5EM8, FRS6R5ESB4 PLHS69EESS2, PLHS69EGSS1, PLHS269ZCB4, PHSC39EGSS0 Crosley CRSE234FB2 Note: This valve's fitting style has been updated to quick-connect fittings, replacing the older screw-on style used on some earlier units — this may cause the appearance to differ slightly from your original part, but it is a correct functional replacement. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine Frigidaire OEM part — factory-specified solenoid design and flow-rate calibration Triple-solenoid assembly supplies water to both the ice maker and door water dispenser Resolves "ice maker not working," "dispenser not working," "slow water flow," and "ice maker overflowing" symptoms Color-coded solenoid wiring (maroon, yellow, green) for straightforward reconnection 4 outlets: 1x 1/4" tube inlet, 3x 5/16" tube outlets, 1x 1/4" tube outlet Updated quick-connect fittings for easier installation than older screw-on designs Ships complete with mounting bracket and installation instructions Replaces the full cross-reference list above, including the older 241734302 design Genuine OEM replacement — guaranteed fit, materials, and performance Product Specifications Part Number 242252702 Part Type Refrigerator Water Inlet Valve (Triple Solenoid) Condition Genuine OEM Brand Frigidaire Application Side-by-Side Refrigerators Voltage 120V per solenoid Frequency 50/60 Hz per solenoid Wattage 20W (maroon), 20W (yellow), 35W (green) Outlets 1x 1/4" tube inlet, 3x 5/16" tube outlets, 1x 1/4" tube outlet Dimensions 7-1/8"L x 3-3/4"W x 3-1/4"H Weight Approx. 1.08 lbs. Minimum Water Pressure 20 psi (required to shut off fully) Kit Contents Valve assembly, mounting bracket, installation instructions Color Gray / Blue / Green / Yellow / Maroon Material Plastic / Metal Quantity 1 valve assembly Compatible Brands Frigidaire, Electrolux, Kenmore, Crosley, White-Westinghouse Installation Notes ⚠️ Unplug Refrigerator And Shut Off Water Supply Before Starting Disconnect power at the outlet and shut off the water supply before beginning. Wear work gloves. Pull the refrigerator away from the wall for access, then locate the valve at the rear of the cabinet. Remove the two hex screws securing the old valve. Before disconnecting anything, note or photograph which plastic tube connects to which port on the multi-port valve assembly — with three solenoids and multiple outlets, getting a hose on the wrong port will send water to the wrong place. Disconnect the water supply hose, the electrical connectors (which are color-coded to their matching solenoids on the new valve), and the outlet hoses, then remove the old valve. Install the new 242252702 in the same position with its included mounting bracket, secure it with the hex screws, and reconnect each outlet hose to its correct port exactly as noted. Reconnect the color-coded electrical connectors to their matching solenoid wires. Reattach the water supply hose, tightening securely. While the back of the refrigerator is accessible, it's also a good opportunity to clean the condenser coils and surrounding area. Restore the water supply and check every connection for leaks before restoring power. Push the refrigerator back into place, then test both the ice maker and water dispenser over the following day. Tools needed: hex screwdriver or nut driver, pliers, work gloves. Frequently Asked Questions My ice maker is overflowing. Is this the valve? Possibly, but check your household water pressure first. This valve requires a minimum of 20 psi to shut off fully — if your home's water pressure is below that, the valve may not close completely even though it's functioning correctly, letting water leak through and overflow the ice maker. If your water pressure tests below 20 psi, that's the underlying cause rather than a defective valve, and addressing the pressure issue (or installing a pressure-boosting solution) is the correct fix. The new valve looks different from my old one. Is that normal? Yes. This valve has been updated to use quick-connect fittings in place of the older screw-on style used on earlier units, so the connection points may look different from what you're used to. It's still a correct, direct functional replacement — the new fittings just make installation somewhat easier. How do I know which hose goes where? This valve has multiple outlets. Note or photograph the hose routing on your old valve before disconnecting anything — with three solenoids and four total outlets, it's easy to reverse a connection if you're not careful. The electrical connectors are color-coded (maroon, yellow, green) to help you match them to the correct solenoid on the new valve, which makes the wiring side more foolproof than the hose routing. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by Frigidaire to factory specifications — guaranteed fit, materials, and performance. It matches the original triple-solenoid design, wattage per solenoid, and outlet configuration of the water valve originally installed in your refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less