Search results for "washer knob"

Genuine OEM WPW10453947 Washer or Dryer Control Knob  The Genuine OEM WPW10453947 is a factory-original control knob used on both washers and dryers across the Whirlpool platform — the same knob design is shared between select top-load washer cycle-selector dials and dryer cycle/timer dials, depending on the model. It mounts onto the control shaft on the console and is what the user grips to select a wash or dry cycle. Over time these knobs commonly crack, the D-shaped shaft-grip inside wears out and starts spinning freely on the shaft, or the knob's pointer/indicator fades or breaks off. As the genuine Whirlpool part, it matches the factory shaft profile, detent feel, and indicator marking of the original equipment, so there's no fit or cosmetic mismatch. It directly replaces W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979. Installs in under 5 minutes with no tools required — it's a simple push-on friction fit in most applications. Quick Answer The Genuine OEM WPW10453947 Washer or Dryer Control Knob fixes Whirlpool, Amana, Admiral, Inglis, Roper, Kenmore, Crosley, and Maytag washers and dryers with a cracked, spinning, or missing cycle-selector knob. This is the factory-original Whirlpool knob — not an aftermarket equivalent — and is used on both washer and dryer control panels depending on model. Replaces W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979. Classic symptom: knob spins freely on the shaft without turning the dial, or won't stay in the selected cycle position. Common Problems This Part Fixes Control knob spins freely on the shaft without engaging the dial underneath Knob is cracked, chipped, or has broken retaining tabs on the back Knob won't stay pointed at the selected cycle Indicator marking or pointer on the knob is faded, worn, or broken off Knob is missing entirely, making it difficult to select a cycle Knob feels loose or wobbly on the control shaft Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This control knob directly replaces the following OEM and cross-reference part numbers: W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This control knob is compatible with select washer and dryer models from the following brands: Whirlpool washers and dryers (including WTW4616FW1, NTW4700YQ0, and related models) Amana washers and dryers (select models) Admiral washers and dryers (select models) Inglis washers and dryers (select models) Roper washers and dryers (select models) Kenmore washers and dryers (select Whirlpool-built models) Crosley washers and dryers (select models) Maytag washers and dryers (select Whirlpool-built models) Note: This same knob is used across hundreds of washer and dryer model numbers on both appliance types. Always verify fit using your appliance's exact model number before ordering, since visually similar knobs with a different shaft profile are used on other platforms. Contact our support team with your model number if you're unsure. Key Features Genuine Whirlpool OEM control knob — factory-original fit, feel, and appearance Used on both washer and dryer control panels across the Whirlpool platform Resolves "knob spins freely," "cracked knob," and "missing cycle indicator" symptoms Matches original detent feel and cycle-position indicator Push-on friction fit — no tools required for installation Replaces W10453947, 2304653, AP5607287, AWP50246, EAP3632979, PD00008425, PS3632979 Compatible with Whirlpool, Amana, Admiral, Inglis, Roper, Kenmore, Crosley, and Maytag washers and dryers Genuine OEM part — factory-specified materials and markings Product Specifications Part Number WPW10453947 OEM Part Number WPW10453947 Part Type Washer / Dryer Control Knob Condition Genuine OEM Replacement Application Washer or Dryer Cycle-Selector Control Panel Mounting Push-on friction fit to control shaft Compatible Brands Whirlpool, Amana, Admiral, Inglis, Roper, Kenmore, Crosley, Maytag Installation Notes ℹ️ No Tools Required — Unplug Appliance First Disconnect power to the washer or dryer before beginning. Note the current cycle position of the old knob before removing it, so you can align the new one the same way. Grip the old knob firmly and pull straight outward, away from the console, to release it from the friction fit on the shaft. If it's cracked and difficult to grip, work a flat-blade screwdriver gently behind the knob's edge to help pry it free, taking care not to damage the console. Line up the new WPW10453947 knob's D-shaped (or splined) center opening with the flat side of the control shaft, and press straight in until it seats fully against the console. Restore power and test that the knob turns smoothly through each cycle position and the indicator lines up correctly. Frequently Asked Questions Is this knob for a washer or a dryer? Both — this is a shared control knob design used on select Whirlpool-platform washers and dryers, depending on the model. The knob itself is identical; what it controls (wash cycle vs. dry cycle) depends on which appliance and console it's installed in. Confirm your appliance's model number before ordering to make sure this is the correct knob for your specific control panel. My knob spins freely and doesn't change the cycle — is this the fix? Yes, in most cases. This happens when the knob's internal shaft-grip (the D-shaped or splined opening that mates with the control shaft) wears out or cracks, so the knob spins independently of the shaft underneath it. Replacing the knob restores a snug grip on the shaft so turning it actually moves the selector. Do I need any tools to install this? No — it's a simple push-on friction fit. Pull the old knob straight off the shaft (a flat-blade screwdriver can help pry a stuck or cracked one loose) and press the new one on, matching the shaft's flat side to the knob's opening. No screws or fasteners are involved. Is this a genuine Whirlpool part or an aftermarket equivalent? This is the genuine, factory-original Whirlpool knob — not an aftermarket equivalent. It matches the original shaft profile, detent feel, and cycle-indicator markings, so there's no mismatch in fit or appearance versus the original equipment. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine Whirlpool OEM Part ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WH01X24378 Washer / Dryer Cycle Selector Knob The XPARTCO WH01X24378 is an aftermarket replacement cycle selector knob (options knob) compatible with a wide range of GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers. The selector knob is one of the primary user controls on the appliance's control panel — it's what you grip and turn to choose the wash or dry options and settings for each load. On many GE-platform washers and dryers, this smaller selector knob works alongside a larger main timer/cycle knob to give you fine-grained control over the specific options within your selected cycle. Over time, selector knobs wear out from repeated twisting motions, get cracked or dropped, or lose their grip on the internal shaft — all of which make it difficult or impossible to change the appliance's settings. Constructed from heat-resistant plastic with a clean white and chrome finish. Snap-on installation — no tools required. Pulls straight off the control shaft and pushes back on. This knob directly replaces WH01X24378, AP5986397, 4396548, and PS11726904. Important: this is the smaller cycle selector/options knob. If you need the larger main timer knob for your GE washer, that's a different part number (PS11736611) — check which knob is broken before ordering. Installs in under 1 minute — no tools required. Quick Answer The XPARTCO WH01X24378 Washer Cycle Selector Knob replaces a cracked, loose, stripped, or missing selector knob on GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers. Heat-resistant plastic, white and chrome finish. Snap-on installation — pulls straight off, pushes back on. Replaces AP5986397, 4396548, PS11726904. This is the smaller cycle/options knob — NOT the larger main timer knob (PS11736611). No tools required. Common Problems This Part Fixes Selector knob cracked, broken, or split from age and repeated use Knob loose and slipping on the control shaft — no longer changes settings when turned Knob has stripped or damaged internal grip and won't stay coupled to the shaft Knob missing entirely from the control panel Knob damaged from impact — dropped or bumped Knob discolored, faded, or worn from years of daily handling Difficulty selecting cycle options — knob no longer clicks into detent positions cleanly Water or detergent damage to the knob material Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This cycle selector knob directly replaces the following OEM and cross-reference part numbers: WH01X24378, 4396548, AGE26094, AP5986397, EAP11726904, OEM17959200, PD00037085, PS11726904. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This selector knob is compatible with select washers and dryers from the following brands: GE washers — GTW500ASNWS and related top-load models GE dryers — GTX42GASJWW, GTD45GASJ2WS and related models GE Profile and GE Café washers and dryers (select models) GE Monogram washers and dryers (select models) Hotpoint washers and dryers (select models) RCA washers and dryers (select GE-built models) Haier washers and dryers (select models using GE-platform controls) Important — Two Knobs, Two Part Numbers: Many GE washers and dryers have TWO knobs on the control panel: a larger main timer/cycle knob and a smaller cycle selector/options knob. The WH01X24378 is the smaller cycle selector/options knob. If your broken knob is the larger main timer knob, you need a different part number (PS11736611 on many GE models). Before ordering, visually confirm which knob is broken and compare the size and shape to the images. Contact our support team with your model number if you're unsure. Key Features Cycle selector/options knob — used to choose specific settings within your selected wash or dry cycle Snap-on installation — pulls straight off the control shaft, pushes straight back on; no tools or hardware required Heat-resistant plastic construction — designed for years of daily use without warping or cracking Clean white and chrome finish complements GE appliance styling Ergonomic shape for comfortable grip and precise cycle selection Restores full cycle control when the original knob has cracked, stripped, or gone missing Replaces WH01X24378, AP5986397, 4396548, and PS11726904 Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers Important: this is the smaller cycle selector/options knob — NOT the larger main timer knob (PS11736611, sold separately) Aftermarket replacement built to OEM-equivalent quality standards Quick replacement — installs in under 1 minute Product Specifications Part Number XPWH01X24378 Part Type Washer/Dryer Cycle Selector Knob (Options Knob) Condition Aftermarket Replacement Application Washers and Dryers (GE platform) Knob Size Smaller cycle/options knob (NOT the larger main timer knob) Color White / Chrome Material Heat-resistant plastic Installation Snap-on — no tools required Larger Timer Knob Different part — PS11736611 (sold separately) Compatible Brands GE, Hotpoint, RCA, Haier, Monogram, Café Installation Notes ⚠️ Unplug Washer/Dryer Before Starting — Quick Toolless Replacement Disconnect power before beginning as a general safety precaution. Wear work gloves if desired. Locate the old cycle selector knob on the control panel of your washer or dryer. Grip the knob firmly and pull it straight off the control shaft — it should come off with a moderate pull (no tools or hardware required). If the knob is stuck or the internal grip has stripped and it's spinning without releasing, use a soft cloth wrapped around it for better grip, or gently pry it off with a plastic tool (avoid metal tools that could damage the control panel finish). Once the old knob is off, inspect the metal or plastic control shaft — if it's damaged, worn round, or spinning freely with no resistance, the underlying switch or shaft may also need replacement. If the shaft is intact, align the new WH01X24378 knob with the flat sides of the shaft (the knob has a matching D-shape or flat receiver inside) and push it firmly into place until it seats fully. Rotate the knob through its full range of positions to confirm it clicks into detents cleanly and turns smoothly. Restore power and run a test cycle. Tools needed: None (soft cloth optional). Frequently Asked Questions Is this the smaller or larger knob on my GE washer? The WH01X24378 is the smaller cycle selector (options) knob. Many GE washers and dryers have two knobs on the control panel: a larger main timer/cycle knob that selects the primary wash program, and a smaller cycle options knob (this one) that selects sub-options like temperature, spin speed, or soil level. Before ordering, look at your control panel and identify which knob has failed — if the smaller knob is broken, this is the correct part. If the larger main timer knob is broken, you need a different part (PS11736611 on many GE models). The two knobs are not interchangeable. How do I remove the old knob if it's cracked or spinning without coming off? If the internal grip on the old knob has stripped and it's spinning freely on the shaft without releasing, wrap a soft cloth around it for extra grip and pull firmly straight up. If that still doesn't work, gently pry it off with a plastic pry tool (a plastic putty knife or credit card can work). Avoid metal tools that could scratch the control panel finish. If the knob is cracked, you can sometimes break away the broken pieces to expose the internal grip on the shaft, then work each piece off. Once the old knob is off, inspect the control shaft — if it's damaged or spinning without resistance, the underlying switch may need replacement too. Do I really not need any tools for this? Correct — the WH01X24378 uses a snap-on installation with no screws or hardware. To install, align the new knob with the flat side (D-shape) of the control shaft and push it straight down until it seats fully. The whole replacement typically takes under a minute. Just make sure the knob is fully seated and rotates through all positions with the correct detent clicks before you plug the appliance back in. The knob installs fine but my washer still doesn't change settings — what next? If the new knob is installed correctly (fully seated and rotates through positions with detent clicks) but changing the knob position doesn't change the cycle behavior, the underlying selector switch or control shaft has likely failed — not the knob. Common causes include the shaft spinning freely without engaging the switch inside (the shaft has stripped or broken), or the electrical selector switch itself has failed. In these cases, replacing just the knob won't fix the problem — the switch assembly behind the panel also needs to be replaced. Contact our support team with your model number for the correct switch part number. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from heat-resistant plastic to match the dimensions, D-shape shaft receiver, snap-on installation, and cycle selection function of the original WH01X24378 selector knob used in compatible GE, Hotpoint, RCA, Haier, Monogram, and Café washers and dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WH01X10060 Washer / Dryer Selector Knob – Compatible with GE & Hotpoint Laundry Units Product Description Restore smooth control and reliable operation with the XPARTCO WH01X10060 Washer / Dryer Selector Knob. This high-quality aftermarket replacement knob fits securely onto the selector switch shaft, allowing easy and precise cycle or function selection. A cracked, loose, or missing selector knob can make it difficult to operate your washer or dryer correctly. Replacing it with this durable XPARTCO knob helps restore normal operation and improves everyday usability. XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price. Replaces Part Numbers WH01X10060, WH01X10140, 277248, WE01M0445, WE01X10142, WE01X10147, WE1M445, WE1X10142, WE1X10147, WH01X10107, WH01X10135, WH1X10060, WH1X10107, WH1X10135, WH1X10140, PD00001193, EAP268450, AH268450, EA268450, AP2044504, PS268450. Compatibility This replacement washer / dryer selector knob fits select GE and Hotpoint washers and dryers. Commonly used on laundry units with rotary selector switches. Always verify your appliance’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM fit and appearance 🎛️ Smooth Selector Control – Restores easy cycle or function selection 🧩 Direct-Fit Design – Push-on fit for secure installation 💪 Durable Plastic Construction – Built for repeated daily use 💰 Cost-Effective Repair – Affordable alternative to OEM knobs 📐 Product Specification Part Number: WH01X10060 Component Type: Washer / Dryer Selector Knob Material: High-strength molded plastic Color: White (OEM-style) Mounting: Push-on / shaft-fit Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Ensure the washer or dryer is powered off before installing the knob. Basic Steps: Turn the appliance off. Align the new XPARTCO WH01X10060 knob with the selector shaft. Press firmly until fully seated. Rotate to confirm smooth operation. ⏱️ Time Required: Under 2 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore smooth control in seconds — Add to Cart Now for a quick, budget-friendly fix!

Read more less

XPARTCO WE01X30638 Laundry Center Control Knob The XPARTCO WE01X30638 is an aftermarket replacement control knob compatible with select GE, Hotpoint, RCA, and Kenmore GE-built laundry centers (stacked washer/dryer combination units). The control knob mounts on the timer or cycle selector shaft on the laundry center's control panel — it's what you grip and turn to choose wash cycles, dry cycles, and timer settings on both the washer and dryer sections of the unit. Because a stacked laundry center's knobs get twice the daily use of a standalone appliance (one control panel serving both washer and dryer functions), cracked and stripped knobs are one of the most common repairs on these units. Constructed from durable black ABS plastic with a polished silver edge ring and an internal metal plate insert that grips the D-shaped control shaft — allowing precise detent positioning so you land exactly on your desired cycle setting. Approximately 2" in diameter with thick inner walls to resist the cracking that plagues aging original knobs. Snap-on installation — pulls straight off, pushes back on, no tools required. This is the current production version, directly superseding WE01X24776. It also replaces 4961358, AP6996856, PS16226089, and EAP16226089. Installs in under 1 minute — no tools required. Quick Answer The XPARTCO WE01X30638 Laundry Center Control Knob replaces a cracked, stripped, or missing control knob on GE, Hotpoint, RCA, and Kenmore GE-built stacked laundry centers. Black ABS plastic with polished silver edge, ~2" diameter, internal metal plate for a firm shaft grip. Snap-on — no tools required. Current part superseding WE01X24776; also replaces 4961358, AP6996856, PS16226089, EAP16226089. Compatible with GE GUD27ESPM0DG, GUD27ESPM1DG, GUD27GSPM0DG, GUD27GSPM1DG and related GUD27 series laundry centers. Common Problems This Part Fixes Control knob cracked or split from age and repeated use — the most common failure on GUD27-series laundry centers Knob spinning freely on the shaft — internal grip stripped, no longer changing settings when turned Knob difficult to turn or not responding — worn internal metal plate no longer engaging the shaft Knob missing entirely from the control panel Knob loose and wobbling on the shaft — imprecise cycle selection Hairline cracks visible around the knob's shaft opening — early-stage failure that will soon strip Knob damaged from impact or overtightened grip Replacing multiple aging knobs at once — original knobs from the same production era tend to crack around the same time Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This laundry center control knob directly replaces the following OEM and cross-reference part numbers: WE01X30638, WE01X24776, AGE25575, AP6996856, EAP16226089, PD00068517, PS16226089. WE01X30638 is the current production part superseding WE01X24776. Contact our support team with your model number if you need confirmation before ordering. Compatibility This control knob is compatible with select laundry centers (stacked washer/dryer units) from the following brands: GE laundry centers — GUD27ESPM0DG (electric dryer) and GUD27ESPM1DG series GE laundry centers — GUD27GSPM0DG (gas dryer) and GUD27GSPM1DG series GE laundry centers — related GUD27 series models (verify with parts diagram) Hotpoint laundry centers (select GE-built models) RCA laundry centers (select GE-built models) Kenmore / Sears laundry centers (select GE-built models) Tip: If one knob on your laundry center has cracked, inspect the others — knobs from the same production era typically develop cracks around the same time. Since the replacement takes seconds and the knobs are identical, many customers order two or more at once and replace them all in a single session, avoiding a repeat order a few months later. This knob is approximately 2" in diameter — confirm your original knob's size matches before ordering. Key Features Control knob for laundry center timer and cycle selection — installs on the control panel shaft Durable black ABS plastic construction with thick inner walls — resists the cracking common on aging original knobs Polished silver edge ring for a clean, modern look that matches GE laundry center styling Internal metal plate insert grips the D-shaped control shaft firmly — precise detent positioning for accurate cycle selection Approximately 2" diameter with smooth mirror-polished surface for a comfortable grip Snap-on installation — pulls straight off the shaft, pushes back on; no tools or hardware required Current production part — directly supersedes WE01X24776 Replaces 4961358, AP6996856, PS16226089, and EAP16226089 Compatible with GE GUD27ESPM0DG/1DG and GUD27GSPM0DG/1DG laundry centers, plus Hotpoint, RCA, and Kenmore GE-built models Aftermarket replacement built to OEM-equivalent quality standards Quick replacement — installs in under 1 minute Product Specifications Part Number XPWE01X30638 Supersedes WE01X24776 Part Type Laundry Center Control Knob (Timer / Cycle Selector) Condition Aftermarket Replacement Application Laundry Centers / Stacked Washer-Dryer Units (GE platform) Diameter Approximately 2" Color Black with polished silver edge Material ABS plastic with internal metal plate insert Shaft Type D-shaped shaft receiver Installation Snap-on — no tools required Compatible Brands GE, Hotpoint, RCA, Kenmore (GE-built) Installation Notes ⚠️ Unplug Laundry Center Before Starting — Quick Toolless Replacement Disconnect power before beginning as a general safety precaution. Locate the old control knob on the laundry center's control panel. Grip the knob firmly and pull it straight off the control shaft — it should come off with a moderate pull (no tools required). If the knob is cracked and spinning without releasing, wrap a soft cloth around it for extra grip, or gently pry it off with a plastic tool (avoid metal tools that could scratch the control panel). Once the old knob is off, inspect the metal control shaft — note the D-shape (flat side) of the shaft. If the shaft itself is damaged, worn round, or the timer behind it feels loose, the underlying timer or switch may also need attention. Align the new WE01X30638 knob's internal D-shaped receiver with the flat side of the shaft and push it firmly straight on until it seats fully. Rotate the knob through its full range to confirm it clicks into each detent position cleanly and the indicator lines up with the panel markings. Restore power and run a quick test cycle. If replacing multiple knobs, repeat for each position — they're all identical on compatible GUD27-series units. Tools needed: None (soft cloth optional). Frequently Asked Questions Why do the knobs on my GE laundry center keep cracking? The original knobs on GUD27-series laundry centers are subject to constant rotational stress concentrated at the D-shaped shaft opening — and on a stacked laundry center, one control panel serves both the washer and dryer, so the knobs see roughly double the daily turning of a standalone appliance's controls. Over years of use, hairline cracks form at the shaft opening and gradually spread until the knob's grip strips and it spins freely. The replacement knob's thick inner walls and internal metal plate insert are designed to resist this failure pattern. If one of your knobs has cracked, check the others — knobs from the same production era typically crack around the same time, and replacing them together saves a repeat order. What's the difference between WE01X30638 and WE01X24776? These are the same control knob across production revisions. WE01X24776 was the earlier GE part number, and WE01X30638 is the current production version that GE issued as its direct replacement. Both are physically and functionally interchangeable — if your laundry center's parts diagram shows WE01X24776, the WE01X30638 is the correct current replacement, and this listing covers both numbers. There may be a very slight color variation between the new knob and your aged originals, but the fit and function are identical. How do I remove the old knob if it's cracked and just spins? When the internal grip has stripped, the knob spins on the shaft instead of pulling off cleanly. Wrap a soft cloth around the knob for extra grip and pull firmly straight out while wiggling slightly. If that doesn't work, gently work a plastic pry tool (a plastic putty knife or old credit card) behind the knob's base and lever it outward evenly around its circumference. Avoid metal tools, which can scratch the control panel. If the knob is badly cracked, you can also carefully break away the remaining plastic to free it from the shaft. Once removed, the new knob pushes straight on. Does this knob work for both the washer and dryer controls on my laundry center? Yes — on compatible GUD27-series laundry centers, the control knobs across the panel are the same part, whether they operate washer cycle selection, dryer timer, or other rotary controls that use the same D-shaped shaft. If you're replacing more than one knob, a single part number covers all matching positions. Just confirm each position's knob is the same ~2" diameter style before ordering multiples — if your unit has a visibly different-sized knob at any position, verify against the parts diagram first. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from durable ABS plastic with an internal metal plate insert to match the dimensions (~2" diameter), D-shaped shaft receiver, snap-on installation, and appearance of the original WE01X30638/WE01X24776 control knob used in compatible GE, Hotpoint, RCA, and Kenmore GE-built laundry centers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

W11676494 Dryer Genuine OEM Knob Replaces Part Numbers: W11676494, W10215799, AP7215412, .

Read more less

XPARTCO WE01X20374 Dryer Timer Knob The XPARTCO WE01X20374 is an aftermarket replacement timer knob for GE dryers, and also fits select Hotpoint and RCA models. Located on the control panel, this knob mounts onto the timer's D-shaped shaft and lets you set desired drying times and select additional functions like air fluff or wrinkle release cycles. White in color, with a D-shaped opening for the timer shaft. Causes of a faulty timer knob include wear from repeated grasping and twisting over years of use, or exposure to high dryer temperatures degrading the knob material over time. Symptoms of a damaged timer knob include difficulty rotating the knob smoothly to desired time settings, the dryer not initiating cycles properly based on knob position, a loose or wobbling knob that could fall off, or cracking, chipping, or discoloration on the knob exterior. It directly replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912. Quick Answer The XPARTCO WE01X20374 Dryer Timer Knob fixes GE, Hotpoint, and RCA dryers with a knob that's hard to turn, doesn't properly select cycle settings, wobbles or feels loose, or shows cracking, chipping, or discoloration. White, D-shaped opening. Replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912. This is the correct knob to pair with certain GE dryer models where the similarly-numbered WE1M654 knob is not the right fit and can throw off cycle timing. Common Problems This Part Fixes Difficulty rotating the knob smoothly to desired time settings Dryer not initiating cycles properly based on knob position Loose or wobbling knob that could fall off Cracking, chipping, or discoloration on the knob exterior Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer timer knob directly replaces the following OEM and cross-reference part numbers: WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This timer knob is compatible with select GE dryers, and also fits select Hotpoint and RCA dryers built on the GE platform. Note — not the same as WE1M652 or WE1M654: These are separate, similarly-styled knobs used on other GE/Hotpoint models. GE's own support has confirmed cases where installing WE1M654 on the wrong model throws off cycle timing, and WE01X20374 is the correct part in those situations. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which knob your dryer needs. Key Features Aftermarket replacement timer knob — direct interface for setting drying time and cycle functions Resolves "hard to turn," "won't select cycle correctly," "loose/wobbling," and "cracked or discolored" symptoms White finish, D-shaped opening for the timer shaft Direct drop-in replacement — no tools required for most installations Replaces WE01X20374, WE1M856, 3276177, WE1M589, AGE25562, AP5805160, EAP8769912, PD00023120, PS8769912 Compatible with GE, Hotpoint, and RCA dryers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number XPWE01X20374 OEM Part Number WE01X20374 Part Type Dryer Timer Control Knob Condition Aftermarket Replacement Color White Shaft Opening D-shaped Extended Shaft 1/8" Repair Difficulty Very Easy — no tools typically required Quantity 1 timer knob Compatible Brands GE, Hotpoint, RCA Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power at the outlet before beginning. Remove the old knob by pulling it straight off the control shaft — no tools are typically required. Align the D-shaped socket on the new WE01X20374 with the flat side of the timer shaft, then press the new knob firmly onto the shaft until it's fully seated. Restore power and test that the knob turns the timer setting correctly through its full range, confirming the dryer starts and progresses through the cycle as expected. Tools needed: none typically required. Frequently Asked Questions My knob spins freely or feels loose. Is this the right part? Yes, this is one of the most common symptoms this knob resolves. If the knob's D-shaped socket has worn out or become stripped, it can no longer grip the timer's shaft properly, letting the knob spin, wobble, or feel loose without actually turning the internal timer mechanism. I was told my knob replacement threw off my drying time. Is WE01X20374 the fix? It can be, depending on your model. GE's own support has addressed a case where a similarly-numbered knob, WE1M654, was installed on the wrong model and caused the cycle to cut off before reaching the true "off" position — the customer was told the correct part for their model was WE01X20374. If your timing seems off after installing a different knob, double-check whether WE01X20374 is the correct part for your specific model. Is this a difficult repair? No, it's one of the simplest dryer repairs — the old knob pulls straight off the shaft and the new one presses straight on, with no tools needed. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the size, D-shaped shaft fit, and white finish of the original WE01X20374 timer knob used in compatible GE, Hotpoint, and RCA dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

WE01X21167 Dryer Genuine Control Knob Fits Specific GE Dryer Models. Replaces Part Numbers:  WE01X21167, WH11X23474, 4392876, AP5986370, PS11725223. Description: This Knob is a Genuine OEM part for specific GE dryer models. This component allows you to select various dryer settings and cycles by turning the control mechanism. It ensures that users can easily adjust and operate the dryer according to their laundry needs.  Causes of a bad knob can include wear and tear from frequent use, accidental damage from dropping or mishandling, or internal cracking and splitting that compromise its functionality.

Read more less

XPARTCO WE1M652 Dryer Timer Knob The XPARTCO WE1M652 is an aftermarket replacement timer control knob for GE dryers, and also fits select Hotpoint and Kenmore models. This knob mounts onto the timer's D-shaped shaft and is what you turn to select and adjust the dryer's cycle setting — it's the direct physical interface between you and the timer mechanism inside the control panel. Finished in white, this knob measures 3" in diameter and accepts a D-shaped shaft. Over time, the knob can crack, break, or simply be lost, or the shaft opening can wear enough that the knob spins freely without actually turning the timer setting. A worn or damaged knob typically shows up as a cracked or broken knob, a knob that won't stay seated on the shaft, a knob that spins without adjusting the cycle, or cycle markings that have become worn and unreadable. It directly replaces 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196. Quick Answer The XPARTCO WE1M652 Dryer Timer Knob fixes GE, Hotpoint, and Kenmore dryers with a cracked, broken, or missing timer knob, a knob that spins without adjusting the cycle, or worn cycle markings. White, 3" diameter, D-shaped shaft. Replaces 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196. Not the same as the similarly-numbered WE1M654 — using the wrong knob can throw off your dryer's cycle timing even though it may physically fit. Common Problems This Part Fixes Timer knob cracked, broken, or missing Knob won't stay seated on the timer shaft Knob spins freely without adjusting the timer setting Cycle indicator markings worn or unreadable Difficulty selecting or adjusting the dryer's cycle setting Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer timer knob directly replaces the following OEM and cross-reference part numbers: WE1M652, 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This timer knob is compatible with select GE dryers, and also fits select Hotpoint and Kenmore dryers built on the GE platform, including model numbers such as HTDX100EM8WW, HTDX100ED6WW, HTDX100EM6WW, HTDX100GM8WW, and HTDX100ED2WW. Note — not the same as WE1M654: A similarly-numbered knob, WE1M654, is a separate part used on different models. GE's own support has confirmed that installing the wrong knob can throw off your dryer's cycle timing, causing the cycle to cut off before reaching the correct "off" position, even if the wrong knob appears to fit. Always confirm your exact model number before ordering. Contact our support team with your model number if you're unsure which knob your dryer needs. Key Features Aftermarket replacement timer control knob — direct interface for selecting the dryer's cycle setting Resolves "cracked or broken knob," "spins without adjusting," and "won't stay on the shaft" symptoms White finish, 3" diameter Accepts a D-shaped shaft Reinforced metal ring at the stem for improved durability against cracking Direct drop-in replacement — no tools required for most installations Replaces 1264289, AH1482196, EA1482196, AP3995164, AGE25175, EAP1482196, PD00024388, PS1482196 Compatible with GE, Hotpoint, and Kenmore dryers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number WE1M652 OEM Part Number WE1M652 Part Type Dryer Timer Control Knob Condition Aftermarket Replacement Color White Diameter 3" Dimensions 1-3/4"H x 2-3/4"W x 2-3/4"D Shaft Type D-shaped Reinforcement Metal ring at stem Repair Difficulty Very Easy — no tools typically required Quantity 1 timer knob Compatible Brands GE, Hotpoint, Kenmore Installation Notes ⚠️ Unplug Dryer Before Starting — The Fit Can Be Snug Disconnect power at the outlet before beginning. Remove the old knob by pulling it straight off the control shaft — no tools are typically required, though some customers have found the fit quite snug and needed a firm, steady pull with some leverage to remove the old knob or seat the new one fully. Align the D-shaped socket on the new WE1M652 with the flat side of the timer shaft, then press the new knob firmly onto the shaft until it's fully seated. Restore power and test that the knob turns the timer setting correctly through its full range, confirming the dryer starts and progresses through the cycle as expected. Tools needed: none typically required. Frequently Asked Questions My old knob cracked and I replaced it with a similar-looking one, but now my drying time seems off. What happened? This is a documented issue when the wrong knob is installed. GE's own support has confirmed that a similarly-numbered knob, WE1M654, is not correct for all models and, if installed on the wrong dryer, causes the cycle to cut off before reaching the true "off" position, throwing off drying time even though the knob may physically fit onto the shaft. If your timing seems off after a knob replacement, double-check that WE1M652 (not WE1M654) is the correct part for your specific model. My knob spins freely without changing the cycle. Is this the right part? Yes, this is one of the most common symptoms this knob resolves. If the knob's D-shaped socket has worn out or become stripped, it can no longer grip the timer's shaft properly, letting the knob spin without actually turning the internal timer mechanism. Is this hard to install? No, it's one of the simplest dryer repairs — the old knob pulls straight off the shaft and the new one presses straight on, with no tools needed. Some customers have noted the fit is quite snug and takes a bit of extra force to fully seat, but no special skills or hardware are required. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the size, D-shaped shaft fit, and white finish of the original WE1M652 timer knob used in compatible GE, Hotpoint, and Kenmore dryers. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WH12X955 Washer Lid Switch The XPARTCO WH12X955 is an aftermarket replacement lid switch assembly compatible with GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo units (including GE spacemaker and stacked laundry models). The lid switch is a safety component mounted inside the washer lid — it detects whether the lid is open or closed and signals the control that it's safe for the machine to start, agitate, and spin. When the lid closes, the switch activates and the washer can run through its full cycle. If the lid switch fails, the washer typically won't spin or drain, may not start or agitate at all, and clothes are left sitting in water. This is a complete lid switch assembly with an integrated wiring harness and ground wire. Dimensions: 1-1/4" H x 2-1/4" W x 16" D (the 16" depth is the wire harness that routes from the lid down into the washer cabinet). It directly replaces WH12X955, WH12X0955, AP2045786, 278666, AH270219, EA270219, PS270219, and OEM6137363. Installation involves accessing the lid itself — the switch mounts inside the lid with two screws plus a separate ground wire screw. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO WH12X955 Washer Lid Switch fixes GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo units where the washer won't spin, won't drain, won't start, or won't agitate — leaving clothes sitting in water. Complete lid switch assembly with wiring harness and ground wire. Dimensions 1-1/4"H x 2-1/4"W x 16"D. Replaces WH12X0955, AP2045786, 278666, AH270219, EA270219, PS270219, OEM6137363. Classic symptom: washer won't spin or drain. Common Problems This Part Fixes Washer won't spin — the classic lid switch failure symptom Washer won't drain — clothes left sitting in water at the end of the cycle Washer won't start at all — control not detecting a closed lid Washer won't agitate — the machine won't advance past the fill phase Machine doesn't recognize the lid is closed even when it is Lid switch body cracked from the lid being closed hard over time Internal switch contacts worn out — no longer signaling that the lid is closed Intermittent operation — washer sometimes spins, sometimes doesn't, depending on lid position Broken or frayed lid switch wiring harness Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This washer lid switch directly replaces the following OEM and cross-reference part numbers: WH12X955, 278666, AGE25981, AH270219, EA270219, PD00030733, EAP270219, PS270219, AP2045786, WH12X0955, EXPWH12X955 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This lid switch assembly is compatible with select washer/dryer combo units (spacemaker and stacked laundry models) from the following brands: GE washer/dryer combo units — spacemaker and stacked laundry center models GE Spacemaker washers — select models Hotpoint washer/dryer combo units (select GE-built models) RCA washer/dryer combo units (select GE-built models) Kenmore / Sears washer/dryer combo units (select GE-built models) Note: This lid switch is specific to GE washer/dryer combo and spacemaker units — it is NOT the same switch used on standalone GE top-load washers, which use different lid switch part numbers. Always search by your appliance model number to confirm this part fits before ordering. Contact our support team with your model number if you're unsure. Key Features Lid switch safety assembly — detects whether the lid is open or closed and allows the washer to start, agitate, spin, and drain when the lid is shut Resolves the classic "won't spin" and "won't drain" symptoms of lid switch failure Complete assembly with integrated wiring harness and ground wire Dimensions: 1-1/4" H x 2-1/4" W x 16" D (the 16" depth is the wiring harness) Mounts inside the washer lid with two screws plus a separate ground wire screw Snap-in switch design with connector — no wiring modifications required Replaces WH12X0955, AP2045786, 278666, AH270219, EA270219, PS270219, and OEM6137363 Compatible with GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo and spacemaker units Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number WH12X955 Part Type Washer Lid Switch Assembly Condition Aftermarket Replacement Application Washer/Dryer Combo & Spacemaker Units (GE platform) Dimensions 1-1/4" H x 2-1/4" W x 16" D Includes Lid switch, wiring harness, ground wire Function Prevents washer spin/agitation when lid is open Location Inside the washer lid Mounting Two screws + separate ground wire screw Compatible Brands GE, Hotpoint, RCA, Kenmore (GE-built) Installation Notes ⚠️ Unplug Washer Before Starting — Wear Work Gloves — The Lid Comes Off Disconnect power at the outlet or breaker before beginning. Wear work gloves to protect your hands from sharp sheet metal edges. This repair requires removing the washer lid to access the switch. Open the lid, then push it toward the back of the machine to release the plastic clips at the front that hold the lid up. Slowly lift the lid at the front — you'll see the lid switch is the only thing still connecting the lid to the washer body. Confirm the power is off, then unclip the electrical connector that joins the lid switch harness to the washer's wiring (it's typically a molex-style connector). With the connector released, you can carry the lid to a workbench or flat surface to work on it comfortably. On the underside/inside of the lid, remove the two screws on the right-hand side that hold the switch in place, then remove the screw that secures the ground wire to the inside of the lid. Lift out the old switch. The new WH12X955 switch snaps into place — seat it, reinstall the two mounting screws, and reattach the ground wire with its screw. Route the new harness cable through the same path as the old one; you can gently lift the retaining clips with a flathead screwdriver to slide the new cable through. Reconnect the electrical connector, set the lid back into position, and press it down until the front plastic clips engage. Restore power and test by closing the lid and running a cycle — confirm the washer agitates, drains, and spins. Tools needed: Phillips screwdriver, nut driver, flathead screwdriver, work gloves. (Tip: if you drop the ground wire nut inside the cabinet, a magnet on a stick makes retrieval easy.) Frequently Asked Questions My washer won't spin or drain — is the lid switch the cause? Yes — this is the single most common and telling symptom of a failed lid switch. The lid switch is a safety interlock that prevents the drum from spinning while the lid is open. When the switch fails (cracked body, worn internal contacts, or broken wiring), the control never receives the "lid closed" signal, so it blocks the spin and drain phases as a safety measure — leaving your clothes sitting in water. On many GE washer/dryer combos, a failed lid switch will also prevent the machine from starting or agitating at all. If your washer fills but goes no further, or completes the wash but leaves clothes soaked, the lid switch is the prime suspect. You can confirm by testing the switch for continuity with a multimeter when the lever is depressed. Why is this switch 16" long? The 16" dimension is the length of the wiring harness, not the switch body itself. The switch mounts inside the washer lid, and its harness has to route from the lid, through the hinge area, down into the washer cabinet to reach the main wiring connector. That's why the assembly comes with a long attached cable — and it's also why this repair involves removing the lid to access everything. The switch body itself is compact at roughly 1-1/4" H x 2-1/4" W. Does this fit my standalone GE top-load washer? Probably not. The WH12X955 is specifically used on GE washer/dryer combo units and spacemaker/stacked laundry models. Standalone GE top-load washers use different lid switch part numbers. Because the lid switch design and mounting vary significantly across GE's washer lineup, always search by your appliance model number to confirm the correct part before ordering. If your unit is a standalone top-loader, contact our support team with your model number and we'll identify the right lid switch for it. Do I really have to take the lid off to install this? On most compatible models, yes — the lid switch mounts inside the lid itself, so you'll need to release the lid from the washer body to reach the two mounting screws and the ground wire screw. The good news is that the lid comes off fairly easily: push it toward the back to release the front plastic clips, then lift it slowly, unclip the electrical connector, and carry the lid to a comfortable work surface. Working on the lid off the machine is far easier than trying to reach into a cramped laundry closet. Just be sure power is disconnected before unclipping the connector. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the dimensions (1-1/4"H x 2-1/4"W x 16"D), harness and ground wire configuration, connector, mounting, and lid-detection function of the original WH12X955 lid switch used in compatible GE, Hotpoint, RCA, and Kenmore GE-built washer/dryer combo and spacemaker units. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

WE01X24552 Genuine OEM Dryer Timer Knob - Compatible with GE Dryers Product Description Restore your dryer’s functionality with the WE01X24552 Genuine OEM Dryer Timer Knob from Parts-O-Matic. This high-quality, original GE-manufactured replacement timer knob is designed for select GE dryer models, enabling precise control of timer settings for cycle duration and drying programs. Crafted from durable, impact-resistant plastic with a secure D-shaped stem, it ensures a reliable fit for worn, cracked, or missing timer knobs. Note: Always disconnect power before installation. Verify model compatibility with your dryer. Replaces Part Numbers: WE01X24552, 4396547, AP6026722, AGE25750, EAP11736611, OEM18080175, PD00041231, PS11736611. Compatibility Compatible with GE dryer models, including but not limited to: GTD42EASJWW GTD65EBSJWS GTD33EASKWW GTX42EASJWW Verify your model number using the dryer’s manual or contact Parts-O-Matic support for assistance. Key Features ✅ Genuine OEM Part: Original GE-manufactured timer knob for guaranteed compatibility and quality. ✅ Brand Compatibility: Specifically designed for select GE dryer models. 🔥 Specifications: Made of durable plastic, D-shaped stem, matte white or chrome finish (color may vary), dimensions approximately 2.5" diameter x 1.2" height. 💰 Cost-Effective: Offers OEM performance at a competitive price. 🛠️ Easy Installation: Tool-free installation, completes in 2–5 minutes. 🛡️ Reliable Fixes: Resolves issues with broken, stripped, or non-functional timer knobs. Installation Instructions Safety First: Unplug the dryer from the power source to prevent electrical hazards. Gently pull the old timer knob straight off the control shaft. Use a flathead screwdriver to pry if needed, but avoid excessive force. Align the WE01X24552 timer knob’s D-shaped stem with the control shaft and push firmly until secure. Test the timer knob by turning it to confirm proper engagement with dryer timer settings. Estimated Time: 2–5 minutes Product Specifications Material: High-impact plastic Color: Matte white or chrome (varies by model) Dimensions: 2.5" diameter x 1.2" height (approximate) Weight: 0.5 oz Stem Type: D-shaped for secure fit SKU: REP-WE01X24552

Read more less