XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from overheating with the XPMTC-120 Microwave Thermal Cut-Off Fuse 120℃ (248°F), Normally Closed. This high-quality aftermarket safety device remains closed (conductive) during normal operation and opens permanently when internal temperatures exceed 120℃, cutting power to prevent component damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe operation and proper protection.
Replaces Part Numbers
XPMTC-120, MTC-120, KSD-120LC, Microwave Thermal Fuse 120C NC, 248F Normally Closed Thermal Cutoff, WB27X1127, 254709, AH239811, EA239811, WB21X0535, WB21X535, PD00023089, EAP239811, AP2026352, PS239811, WB21X10162, 1556022, AH2370041, EA2370041, KSD 120LC, PD00037108, EAP2370041, AP4484224, PS2370041, 5304509474, 5304464093, 4583662, PD00042646, EAP12071309, AP6230621, PS12071309, WB27X11212, 3026293, SE-7350-006, WB24X28948, WB27X10854, PD00044723, EAP8754627, AP5791056, PS8754627, DE47-20059B, 2079767, DE47-20059A, PD00005107, EAP4226453, AP4580112, PS4226453, DE47-20060A, 2079768, PD00036362, EAP4226454, AP4220155, PS4226454, WB27X10567, 946799, AH239709, PD00050529, EA239709, AP3192016, PS239709.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 120℃ (248°F) NC thermal cutoff.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure.
🔍 What’s the Difference Between NC and NO Thermal Cut-Offs?
Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC.
Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs).
⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 120℃ (248°F) Rating – Trips at unsafe temperature levels
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Helps prevent overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-120
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 120℃ (248°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or microwave cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or cavity.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-120 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety and dependable operation — Add to Cart Now for a reliable, budget-friendly repair!
XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F) – Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from extreme overheating with the XPMTC-180 Microwave Thermal Cut-Off Fuse 180℃ (356°F), Normally Closed. This high-temperature safety device is designed to remain closed (conductive) during normal operation and open permanently when internal temperatures exceed 180℃, immediately cutting power to prevent serious damage or fire risk. A tripped thermal cut-off can cause the microwave to lose power or stop heating. Replacing it with the correctly rated NC fuse restores safe and reliable operation.
Replaces Part Numbers
XPMTC-180, MTC-180, Microwave Thermal Fuse 180C NC, 356F Normally Closed Thermal Cutoff, WB24X29270, 4586233, PD00045446, EAP12170419, KSD1 BR1 180, AP6262395, PS12170419, 6930W1A003X, 1365203, AH3530468, EA3530468, PD00001857, AP4443816, PS3530468.
Compatibility
This normally closed microwave thermal cut-off fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 180℃ (356°F) NC thermal cutoff.
Commonly used near the magnetron, high-heat zones, or cavity protection points.
Always verify temperature rating and contact type before ordering.Contact our support team if you’re unsure.
🔍 What’s the Difference Between NC and NO Thermal Cut-Offs?
Normally Closed (NC): Circuit is closed during normal operation and opens permanently when the rated temperature is reached.👉 Most microwave thermal cut-offs are NC.
Normally Open (NO): Circuit is open during normal operation and closes only when overheated (used in limited designs).
⚠️ Installing the wrong type (NC vs NO) may cause the microwave not to run or fail to protect against overheating.
✅ Key Features
🔄 Aftermarket Replacement – Built to OEM-equivalent safety specifications
🌡️ 180℃ (356°F) Rating – Designed for high-temperature protection zones
🔁 Normally Closed (NC) – Conducts power during normal operation
🛡️ Critical Safety Component – Prevents overheating and fire hazards
💰 Cost-Effective Repair – Affordable alternative to OEM thermal cut-offs
📐 Product Specification
Part Number: XPMTC-180
Component Type: Microwave Thermal Cut-Off Fuse
Temperature Rating: 180℃ (356°F)
Contact Type: Normally Closed (NC)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Magnetron or high-heat cavity temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal cut-off near the magnetron or high-heat area.
Disconnect wiring and remove the failed fuse.
Install the new XPMTC-180 (NC) thermal cut-off in the same position.
Reassemble the microwave and restore power.
Test operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety under extreme heat conditions — Add to Cart Now for a dependable, budget-friendly repair!
XPMTC-70 Microwave Thermal Fuse 70 ℃ (158 °F) Normally Closed – Universal Microwave Safety Cutoff
Product Description
Protect your microwave from overheating with the XPMTC-70 Microwave Thermal Fuse 70 ℃ (158 °F). This high-quality aftermarket safety fuse is designed to permanently interrupt power when internal temperatures exceed safe operating limits. A blown thermal fuse can cause the microwave to lose power, stop heating, or shut down entirely. Replacing it with this reliable XPMTC-70 fuse restores safe operation and helps prevent damage to internal components.
Replaces Part Numbers
XPMTC-70, MTC-70, Microwave Thermal Fuse 70C, 158F Thermal Cutoff, KSD201 70C, KSD-40LC 70,
Compatibility
This universal microwave thermal fuse is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that require a 70 ℃ (158 °F) thermal cutoff.
Commonly used in countertop, over-the-range, and built-in microwave models.
Always verify temperature rating and fuse style before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM temperature cutoff performance
🌡️ 70 ℃ (158 °F) Safety Rating – Activates at unsafe temperature levels
🛡️ Critical Safety Component – Helps prevent overheating and fire risk
💪 Durable Construction – Designed for long-term reliability
💰 Cost-Effective Repair – Affordable alternative to OEM thermal fuses
📐 Product Specification
Part Number: XPMTC-70
Component Type: Microwave Thermal Fuse / Thermal Cutoff
Temperature Rating: 70 ℃ (158 °F)
Function: One-time safety cutoff
Material: Heat-resistant metal body
Application: Microwave cavity or magnetron temperature protection
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, insulated pliers
⚠️ Safety First:Unplug the microwave before servicing. Microwaves contain high-voltage components—allow time for capacitors to discharge before handling internal parts.
Basic Steps:
Disconnect microwave power.
Remove the outer cabinet or access panel.
Locate the thermal fuse near the magnetron or cavity.
Disconnect wiring and remove the blown fuse.
Install the new XPMTC-70 thermal fuse in the same position.
Reassemble the unit and restore power.
Test microwave operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore microwave safety and functionality — Add to Cart Now for a dependable, budget-friendly repair!
XPU6602-001655 Dryer Drum Belt
(Made in USA)
5 Rib, 92"
Drum Belt Replaces: 6602-001655, 6602-001314, AP4373659, PS4133825.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPWE01X10127 Dryer Drum Roller
Fits Specific GE Dryer Models.
Replaces Part Numbers:WE01X10127, WE1X10127, AH264443, EA264443, AP3669450, PS264443.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: California’s Proposition 65
XPWE12X10006 Dryer Idler Pulley
Fits Specific GE Dryer models
Replaces Part Numbers: WE12X10006, 943876, AH265688, EA265688, AP3189111, PS265688.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPWE12X83 Dryer Idler Pulley
Replaces Part Numbers: WE12X83, WE12M0008, WE12M08, WE12M8, WE12X0080, WE12X0083, WE12X0092, WE12X80, WE12X92, AH265721, EA265721, AP2043227, PS265721.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
