XPARTCO W10205415 Dryer Drum Belt 5 Rib, 92" Drum Belt Replaces: WPW10205415, W10205415, 1937372, 35001137, 6602-001314, AP6017004, PS11750299. Description: This Belt is a replacement part is compatible with specific Whirlpool, Maytag, Amana dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

XPARTCO W10209656 Range Surface Igniter – Compatible with Whirlpool, Maytag, KitchenAid, and Kenmore Gas Ranges Product Description Restore reliable burner ignition with the XPARTCO W10209656 Range Surface Igniter. This high-quality aftermarket replacement provides the heat needed to ignite gas burners on your cooktop. A weak or failed igniter can cause burners not to light or take too long to ignite. Replacing it with this durable XPARTCO igniter restores instant ignition and safe cooking performance. Replaces Part Numbers WPW10209656, W10209656, 1468965, 98008959, 98012193, 98014514, 98014515, 98017561, 98017562, 98017917, W10112313, W10127479, AP6017135, PS11750430. Compatibility This replacement surface igniter is compatible with select Whirlpool, Maytag, KitchenAid, and Kenmore gas ranges. Example compatible models include (but are not limited to): Whirlpool WFG320M0BS3, Maytag MGR6600FZ0, and Kenmore 665.75002100. Always verify your range’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Compatible with Whirlpool-brand gas ranges 🔥 Reliable Ignition – Provides consistent spark for fast burner lighting 💰 Affordable Solution – Quality alternative to OEM parts at lower cost 🛠️ DIY Friendly – Installs easily with basic hand tools 🛡️ Fixes Common Issues – Solves burners not igniting or clicking without flame 📐 Product Specification Part Number: W10209656 Component Type: Gas Range Surface Igniter Material: High-temperature ceramic base and metal electrode Mounting: Direct-fit replacement for surface burner assembly Operating Conditions: Designed for standard household gas ranges Compliance: Built to OEM-equivalent standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the range and shut off the gas supply before starting repairs. Steps: Disconnect power and shut off gas supply. Remove burner grates and top panel to access the igniter. Detach the wire connector and mounting screw from the old igniter. Install the new XPARTCO W10209656 igniter and reconnect wires. Reassemble burner components, restore power and gas, and test ignition. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Enjoy quick, reliable ignition every time — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO W10225581 Refrigerator Defrost Thermostat – Replaces WPW10225581 – Compatible with Whirlpool, Maytag, Amana, KitchenAid, and Kenmore Refrigerators Product Description Prevent frost buildup and maintain consistent cooling with the XPARTCO W10225581 Refrigerator Defrost Thermostat. This Defrost Thermostat is a reliable replacement for WPW10225581. With top-notch performance and precise temperature control, it effectively regulates your refrigerator's defrost cycle, ensuring your food stays fresh for longer. Keep your fridge running smoothly with this high-quality thermostat. Replaces Part Numbers WPW10225581, W10225581, 1872722, 2149849, 2161331, 2176066, 2188824, 2196155, 2266066, 2266067, 2315504, 2317087, 2319914, 2321799, 2321802, 4387498, W10260437, WPW10225581VP, PD00002717, EAP11750673, AP6017375, PS11750673. Compatibility This replacement defrost thermostat fits select Whirlpool, Maytag, Amana, KitchenAid, Estate, Roper, Jenn-Air, and Kenmore refrigerators. Example compatible models include (but are not limited to): Whirlpool WRS325SDHZ01, Maytag MFF2055YEM00, and Amana ASD2575BRW01. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM performance and reliability standards ❄️ Automatic Defrost Control – Activates the heater to melt frost buildup on coils 💰 Cost-Effective Solution – Dependable performance at a lower cost than OEM parts 🛠️ Easy Installation – Pre-wired design for quick, direct replacement 🛡️ Fixes Common Issues – Solves frost buildup, poor cooling, or water under crisper drawers 📐 Product Specification Part Number: W10225581 (Replaces WPW10225581) Component Type: Refrigerator Defrost Thermostat Material: Metal temperature sensor with insulated wiring leads Temperature Rating: Opens at 48°F, closes at 15°F (varies slightly by model) Mounting: Clips onto evaporator tubing inside freezer compartment Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, wire cutter/stripper, electrical tape or heat-shrink connectors ⚠️ Safety First: Always unplug the refrigerator before performing repairs to prevent electrical shock. Steps: Disconnect power and remove the freezer shelves and back panel. Locate the defrost thermostat clipped to the evaporator tubing. Cut the old thermostat wires near the connector. Install the new XPARTCO W10225581 thermostat using wire connectors or solder joints. Clip the thermostat securely back onto the evaporator coil. Reinstall panels and restore power. ⏱️ Time Required: 20–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Stop frost buildup and restore cooling efficiency — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

XPARTCO W10238100 Refrigerator Water Valve - Compatible with Whirlpool, KitchenAid, Maytag, JennAir, Kenmore, IKEA Product Description Restore your refrigerator’s ice and water dispensing functionality with the replacement XPARTCO W10238100 Refrigerator Water Valve. This replacement part is designed for select Whirlpool, KitchenAid, Maytag, JennAir, Kenmore, and IKEA refrigerators, providing reliable water flow control for the ice maker and water dispenser. It resolves issues like no ice production, no water dispensing, poor water flow, or leaks, offering a cost-effective alternative to OEM parts. Note: Disconnect power and water supply before installation. Verify model compatibility for proper fit. Replaces part numbers: WPW10238100, W10238100, W10498992, IMV-8100, K-78199, PD00002616, EAP11750831, AP6017532, PS11750831. Compatibility: Compatible with models including but not limited to: Whirlpool: GSC25C4EYB02, GSS30C6EYY01, WSF26D4EXB00, WRF560SEHW00, WRF560SEHZ00, WRS526SIAH00 KitchenAid: KSF26C4XYB00, KSF26C6XYY05, KRSC503ESS01, KRFF300EBS01 Maytag: MSB26C6MDM00, MSB27C2XAB00, MFW2055DRE01 JennAir: JFI2089WES Kenmore: 10651764510, 10651789414, 10651133210 IKEA: ISC23CDEXB00 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, KitchenAid, Maytag, JennAir, Kenmore, and IKEA refrigerators. 🔥 Specifications: Single solenoid water inlet valve with electrical connectors, 5/16" push-in to connect outlet, and 1/4" compression inlet. 💰 Cost-Effective Alternative: Matches OEM performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, wrench, pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no ice, no water dispensing, poor water flow, or water leaks. Product Specification Part Number: XPARTCO W10238100 Component Type: Refrigerator water inlet valve Material: Plastic housing, metal fittings, electrical connectors Mounting: Secures to refrigerator frame with screws Operating Conditions: Suitable for refrigerator water systems; 20W, 120V coil Compliance: UL-listed components, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from power and water sources before installation. Follow the owner’s manual for guidance. Use plumber’s tape on threaded connections to prevent leaks. See Installation Guide.

Read more less

XPARTCO W10250160 Dishwasher Upper Dish Rack Stop Clip Fits Specific Whirlpool, Maytag Dishwasher Models Replaces Part Numbers: WPW10250160, W10250160, 1873273, AP6017800, PS11751100. Description: This Adjuster Clip is a replacement part for specific Maytag, Kenmore, Whirlpool dishwasher models. It is used to secure and adjust the height of the dishwasher rack, allowing for better accommodation of various dish sizes and ensuring proper cleaning. This clip ensures that the rack remains stable and properly aligned during the wash cycle. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W10316760 Refrigerator Thermistor Sensor Replaces Part Number: W10316760, WPW10323459, W10323459, 12791417, 12791417SP, 12791419SP, 1876627, AH2580944, EA2580944, AP4538142, PS2580944, W10280385, W10280386, W10308052, W10316760VP, W10438639, W10438761, W10452402 Description: This Refrigerator Thermistor Sensor is a replacement part for select Kenmore, KitchenAid, Maytag, Whirlpool refrigerator models. It is a crucial component responsible for accurately monitoring and regulating the temperature inside the refrigerator and freezer compartments. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W10384183 Refrigerator Thermistor  1" probe, 3.5" lead thermistor for refrigerator compartment. Fits specific Maytag, Kenmore, Whirlpool french door refrigerator models. Replaces Part Numbers: WPW10384183, W10384183, 2118228, AP6020677, PS11753996. Description: This Thermistor is a replacement part for specific Maytag, Kenmore, Whirlpool refrigerator models. It is responsible for monitoring and regulating the refrigerator's temperature by sending temperature readings to the control board, which adjusts the cooling system accordingly. This ensures that the refrigerator maintains a consistent and optimal temperature for food preservation.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W10503278 Refrigerator Control Board Refrigerator electronic (JAZZ) control board. Be aware the board will need to programmed after installation to work properly Replaces Part Numbers: WPW10503278, 12784415, W10503278, 12002339, 12002445, 12002449, 12002508, 12002509, 12002567, 12002706, 12784415V, 12868502, 12868510, 12868513, 2684578, 67003867, 67004453, 67004496, 67004907, 67005043, 67005280, 67005281, 67006034, 67006209, 67006214, 67006216, 67006226, 67006712, 67006740, 8208187, AP6022400, PS11755733, W10165748. Description: This Electronic Control Board is a replacement part for Specific Maytag, Whirlpool refrigerator models. This Electronic (JAZZ) Control Board manages various functions of your refrigerator, ensuring proper temperature control and operation. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W10515057B Refrigerator LED Light Board Light board only Light Housing and Lens not included Replaces Part Numbers: WPW10515057, W10515057, W10398007, AP6022533, PS11755866. Description: This LED Light light board is a replacement part for specific Kenmore, Maytag, Whirlpool refrigerator models. This component provides energy-efficient and long-lasting illumination within the refrigerator compartment, ensuring visibility and easy access to stored items. This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

XPARTCO W10515058B Refrigerator LED Light Driver Board LED Light Driver Board only Light Housing and lens not included Replaces Part Numbers: WPW10515058, W10515058, W10465957, W10522611, AP6022534, PS11755867. Description: This Refrigerator LED Light Driver board is a replacement part for specific Maytag, Kenmore, Whirlpool refrigerator models. This assembly provides the necessary illumination inside the refrigerator, allowing you to clearly see and access the contents. It features energy-efficient LED technology, which offers bright, long-lasting light while consuming less power compared to traditional bulbs. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W10536347 Washer Pump Washer drain pump for select Cabrio, Bravos and other washer models. Replaces Part Number: W10536347, 2392433, 8542672, W10049390, W10155921, W10217134, W10281682, AP5650269, PS5136124. Description: This Drain Pump is a replacement part for select Maytag, Kenmore, Whirlpool washing machine models. This component is responsible for expelling water from the washing machine at the end of the wash and rinse cycles. Its motor and impeller system push water through the drain hose, helping to ensure that the washing machine empties completely.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W10542314 Dishwasher Gasket and Strike Kit Fits Specific Whirlpool, Kenmore, Maytag Dishwasher models. Description: This dishwasher gasket and strike kit (W10542314) is designed for a secure and leak-proof seal on your dishwasher. It ensures a tight closure and proper functioning for your appliance. Trust in XPARTCO for expert solutions and reliable performance with your dishwasher. Replaces Part Numbers:W10542314, 2409202, 8268888, W10284090, W10300589, W10350162, W10542314VP, AP5650274, PS5136129.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less