XPARTCO W10546503KIT Dishwasher Upper Rack Adjuster Repair Kit Fits Specific Whirlpool, Maytag Dishwasher Models This Kit Include part numbers W10546503, W10195840, W10195839, W10250160 Replaces Part Numbers: WPW10546503, W10911100, W10546502, W10546503, W10306646, W10418314, AP6022813, PS11756150, WPW10195840, W10195840, W10418323, AP6016800, PS11750093, WPW10195839, W10195839, AP6016799, PS11750092, WPW10250160, W10250160, AP6017800, PS11751100.    This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO W10613606 Refrigerator Compressor Start Relay - Compatible with Whirlpool, Kenmore, Jenn-Air, Amana, Maytag, KitchenAid Refrigerators Product Description Keep your refrigerator running smoothly with the replacement W10613606 Refrigerator Compressor Start Relay and Capacitor. This high-quality kit, designed for Whirlpool, Kenmore, Jenn-Air, Amana, Maytag, KitchenAid, Admiral, Crosley, and Magic Chef refrigerators, includes a start relay and run capacitor to boost the compressor during startup and maintain consistent cooling. Constructed with durable materials, this kit (15µF ±5% capacitance) addresses issues like the refrigerator not cooling, compressor not starting, or frequent cycling.  Note: Includes one start relay and one run capacitor. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Replaces part numbers: W10613606, 67005560, 3023300, 67003186, 67003764, 67005561, 67005562, W10416065, 8171210, 8208290, 8208368, C8931605, PD00004905, EAP8746522, AP5787784, PS8746522. Compatibility: Compatible with models including but not limited to: Whirlpool: ED5VHEXVB01, ED5VHEXVQ01, WRS325FDAM02 Kenmore: 106.51102110, 106.56542400, 106.58582890, 596.73503200 Jenn-Air, Amana, Maytag, KitchenAid, Admiral, Dacor, Crosley, Magic Chef: Models requiring W10613606 or compatible relay and capacitor kits Specific Kenmore Models: 1999A, 1999W, 2599A, 2599W, 35271, 35278, 35501, 35508, 35541, 35548, 36051, 36058, 36061, 36068, 36271, 36278, 36501, 36508, 36511, 36518, 36521, 36528, 36541, 36548, 36761, 36768, 36791, 36795, 36798 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Jenn-Air, Amana, Maytag, KitchenAid, Admiral, Crosley, and Magic Chef refrigerator models. 🔥 Specifications: replacement compressor start relay and capacitor, 15µF ±5% capacitance, 250VAC rated voltage, 50/60Hz frequency, 120V, 40/85/21 temperature rating, screw terminals, normally open contact, plastic/metal construction, 3.07" x 2.6" x 2.32". 💰 Cost-Effective Alternative: replacement kit offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires screwdriver, needle-nose pliers, work gloves; typically installed in 15–30 minutes. 🛡️ Reliable Fixes: Resolves issues like refrigerator not cooling, compressor not starting, clicking noises, or frequent start-stop cycles. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Restore your refrigerator’s cooling performance today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO W10711017 Range Vent Hood Thermal Fuse The replacement W10711017 Range Vent Hood Thermal Fuse is designed for Jenn-Air range hood models. This replacement fuse protects the range hood’s electrical system (e.g., fan or motor circuits) from overheating or power surges. Ideal for restoring functionality to Jenn-Air range hoods experiencing issues like no power, fan failure, or intermittent operation. This fuse is located on hood control board. Note: Disconnect power before installation. Verify voltage and amperage compatibility with your appliance model. Replaces part numbers: W10711017, AP5949884, PS10057091. Compatibility (W10711017): Compatible with select Jenn-Air range hood models, including but not limited to: Jenn-Air: JXI8736DS00, JXI8742DS00, JXI8936DS00, JXW8736DS00, JXW8936DS00. Verify your model number or contact our support team for assistance. Key Features (W10711017): ✅ Brand Compatibility: Fits select Jenn-Air range hood models. 🔥 Specifications: Replacement thermal fuse, specifications vary by model (typically 125V–250V, verify amperage), heat-resistant, single-use. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes. 🛡️ Reliable Fixes: Addresses range hood issues like no power, fan failure, or intermittent operation. Installation Notes (W10711017): Safety First: Disconnect the appliance from the power source before installation. Location: Typically found on the control board; consult your model’s manual for exact placement. Tools: Use a screwdriver to access the fuse compartment and pliers to remove and install the fuse. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO W10810403 (OE) Washer Lid Switch Assembly – Compatible with Whirlpool, Kenmore, Maytag, Crosley, Roper, Amana Washers Product Description Keep your washer running safely and reliably with the XPARTCO W10810403 Washer Lid Switch Assembly. This replacement part ensures the washer only operates when the lid is securely closed, preventing unsafe operation. A faulty lid switch can cause your washer to not start, stop mid-cycle, or fail to drain. Replacing it with this high-quality part restores dependable performance. What is OE ?:  “OE” (Original Equipment) parts are built to the same specifications, materials, and performance standards as the original factory parts. They offer identical fit and function to OEM (Original Equipment Manufacturer) components but are typically sold under independent brands like XPARTCO for better affordability. Replaces Part Numbers W10810403, 4283179, W10648012, W10787878, W10810403VP, PD00028176, EAP11722981, AP5984435, PS11722981. Compatibility This washer lid switch assembly is compatible with select Whirlpool, Kenmore, Maytag, Crosley, Roper, and Amana top-load washers. Example compatible models include (but are not limited to): Whirlpool WTW4800BQ1, Kenmore 110.20222511, and Maytag MVWC415EW1. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Fits Whirlpool, Kenmore, Maytag, Crosley, Roper, Amana top-load washers 🔒 Safe Operation – Ensures washer won’t run with lid open 💰 Cost-Effective Alternative – OEM-equivalent performance at a lower price 🛠️ Easy Installation – Only requires a Phillips screwdriver, installs in 10–20 minutes 🛡️ Fixes Common Issues – Resolves washers not starting, stopping mid-cycle, or failing to drain 📐 Product Specification Part Number: W10810403 Component Type: Washer Lid Switch Assembly Material: High-durability plastic + electrical connectors Mounting: Direct replacement, top panel mount Operating Conditions: Designed for standard residential washer use Compliance: OEM-equivalent quality standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver ⚠️ Safety First: Always unplug the washer before starting repairs to avoid electrical shock. Steps: Unplug washer and locate lid switch under the top panel. Remove screws securing the control panel and release clips. Disconnect the wire harness from the old switch. Remove the old switch and install the new one in its place. Reconnect wiring, secure panel, and test the washer. ⏱️ Time Required: 10–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your washer’s performance today — Add to Cart Now for a safe, budget-friendly fix!

Read more less

W10820039 Washer Basket Hub Kit Product Title Aftermarket W10820039 Washer Basket Hub Kit - Compatible with Whirlpool, Maytag, Kenmore Washers Product Description Restore your washer’s performance with the W10820039 Washer Basket Hub Kit from Parts-O-Matic. This high-quality aftermarket kit replaces the original W10820039, connecting the spin basket to the drive shaft for smooth agitation and spinning in select Whirlpool, Maytag, and Kenmore top-load washers. Ideal for fixing issues like failure to agitate, slow spinning, or loud noises during cycles. Enjoy free shipping on all orders at Parts-O-Matic—no minimum required! Key Features: ✅ Broad Compatibility: Fits select Whirlpool, Maytag, and Kenmore top-load washer models (see compatibility chart below). 🔥 Reliable Performance: Connects the spin basket to the drive shaft for efficient agitation and spinning. 💰 Cost-Effective Alternative: Aftermarket part delivers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Includes (1) New Style 3" Driven Hub, (1) Old Style 2 7/8" Driven Hub, (1) Driver Hub, and instructions; requires a 7/16" socket with extension and Phillips screwdriver. 🛡️ Fixes Common Issues: Resolves problems like no agitation, slow spinning, loud noises, or loose basket. Compatibility: Compatible with models including but not limited to: Whirlpool: WTW6500WW1, WTW7340XW2, WTW8000BW0 Maytag: MVWB850YW1, MVWC565FW0, MVWX655DW1 Kenmore: 110.22352512, 110.25132411 Replaces part numbers: W10820039, 280145, 8545948, 8545953, W10118114, W10820039VP, AP5985205, PS11723155. Verify your model number in the compatibility chart below or contact Parts-O-Matic support for assistance. Installation Notes: Tools Needed: 7/16" socket with extension, Phillips screwdriver, small flathead screwdriver. Safety First: Unplug the washer before starting the repair. Steps: Remove the agitator cap, unscrew the agitator bolt (7/16"), lift the agitator, remove six Phillips screws to access the hub, and replace with the appropriate hub size (3" or 2 7/8"). Lightly grease the spline for smooth reassembly. Watch our YouTube tutorial or download our installation guide for step-by-step instructions. Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders—no minimum required and a 30-day return policy. Get your washer spinning like new today! Add to cart now for an affordable fix with free shipping on your entire order!

Read more less

XPARTCO W10828351 Dryer Lint Screen with Cover Replaces Part Numbers: W10828351, 8531964, 8531967, W10812395, 348399, 348400, 4338557, 685273, ER8531964, TJDE964, W10828351VP, AP5985829, PS11726200. Description: This Lint Screen Cover and Filter is a replacement part for specific whirlpool, Kenmore Laundry Center dryer models. It serves a dual purpose: the lint screen traps lint and debris from clothes during the drying process, preventing them from clogging the dryer vent, while the cover ensures the lint screen is securely positioned and contributes to optimal airflow within the dryer. Common causes of a bad part include tears or holes in the lint screen that allow lint to pass through and clog the vent, a cracked or broken cover that fails to secure the lint screen properly, or buildup of fabric softener and lint that reduces the effectiveness of the filter. 🧺 W10828351 Dryer Lint Screen with Cover –  Restore airflow and improve dryer efficiency with this high-quality aftermarket replacement for part W10828351. This lint screen with integrated cover is designed to match the performance and fit of the original—at a more affordable price. Ideal for dryers experiencing long dry times, overheating, or lint leakage, this easy-to-install replacement helps protect your appliance and your home. ✅ Product Highlights: Aftermarket Replacement for W10828351 – Compatible with OEM design and specs 2-in-1 Design – Includes both lint screen and cover assembly Improves Dryer Airflow – Helps reduce dry times and wear on clothes Durable & Washable – Built for repeated use and easy cleaning Tool-Free Installation – Snaps right into place in seconds 🔧 Fixes Common Dryer Problems: Long drying cycles Visible lint inside dryer or vent Damaged, warped, or missing lint screen Excessive heat or potential fire hazard 💡 Why Choose Parts-O-Matic?We provide trusted aftermarket and OEM parts at unbeatable prices. Every part we list is carefully sourced for performance, fit, and value—plus fast shipping and helpful support from real appliance pros. 🔁 Compatible with Part Numbers: Replaces OEM #W10828351, 8531964, 8531967, W10812395, 348399, 348400, 4338557, 685273, ER8531964, TJDE964, W10828351VP, AP5985829, PS11726200. 🧰 Fits specific Laundry Center Models From: Whirlpool Kenmore Need help confirming model compatibility? Contact us—we’re here to help you get the right fit the first time.

Read more less

XPARTCO W10876600 Washer Drain Pump – Compatible with Whirlpool, Maytag, Amana, and Crosley Washers Product Description Restore reliable draining performance with the XPARTCO W10876600 Washer Drain Pump. This washer drain pump moves water out of the washer during drain and spin. Replacing a worn or failed pump restores proper draining so cycles finish on time and the basket can reach full spin speed. Replacing it with this durable pump ensures smooth water removal and dependable washer operation at a fraction of the OEM cost. Replaces Part Numbers W10876600, 4455877, W10727777, W10876600VP, PD00034529, EAP11738156, AP6004933, PS11738156. Compatibility This replacement drain pump fits select Whirlpool, Maytag, Amana, and Crosley top-load and front-load washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC565FW0, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM performance standards 💧 Efficient Water Removal – Pumps out water quickly and quietly during drain cycles 💰 Budget-Friendly Solution – High-quality alternative to expensive OEM parts 🛠️ DIY Installation – Plug-and-play design for easy home repair 🛡️ Fixes Common Issues – Solves washer not draining, “F9E1” or “SD” error codes, and standing water problems 📐 Product Specification Part Number: W10876600 Component Type: Washer Drain Pump Assembly Material: Reinforced plastic housing with electric motor Voltage: 120V AC Mounting: Direct-fit replacement on washer base Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Nut driver, pliers, towel or bucket ⚠️ Safety First: Always unplug the washer and disconnect water supply before performing any repairs to prevent electrical shock or leaks. Steps: Disconnect power and water hoses. Tilt the washer back or remove the front access panel. Disconnect the wiring harness and hose clamps. Remove the old drain pump and install the new W10876600 pump. Reconnect hoses and wiring, secure the pump, and reassemble the panel. Restore power and run a drain or rinse cycle to confirm proper operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Fix washer drainage issues quickly — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

W11025122 Dryer Drum Belt - Compatible with Whirlpool, Kenmore, Crosley Dryers Product Description Restore your dryer’s performance with the replacement W11025122 Dryer Drum Belt. This high-quality belt, designed for Whirlpool, Kenmore, and Crosley dryers, connects the motor pulley to the drum, enabling smooth rotation to tumble clothes during drying cycles. Made from durable rubber (92" long, 0.25" wide, 4 ribs, 3 grooves), this belt ensures reliable operation and addresses issues like drum not spinning, unusual noises, or failure to start. Note: Includes one dryer drum belt. Disconnect power before installation. Take photos during disassembly for accurate replacement. Replaces part numbers: W11025122, 4461493, W10709670, PD00034111, EAP11770211, AP6037488, PS11770211. Compatibility: Compatible with models including but not limited to: Whirlpool: WED4815EW1, WED5000DW2, WED4800BQ1, WED4950HW0, WED49STBW1, WED5300SQ0 Kenmore: 110.60202990, 110.60222511, 110.60722990 Crosley: CED7006GW0, CED7011LW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, and Crosley dryer models. 🔥 Specifications: replacement dryer drum belt, 92" long, 0.25" wide, 4 ribs, 3 grooves, durable rubber construction, high wear resistance, non-cracking design. 💰 Cost-Effective Alternative: replacement belt offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, putty knife, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves issues like drum not tumbling, unusual/loud noises, failure to start, or inefficient drying. Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your dryer spinning smoothly today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO W11130359 Washer Suspension Rod Kit – Compatible with Whirlpool, Maytag, Amana, Crosley, and Roper Washers Product Description Reduce vibration and restore smooth, stable operation with the XPARTCO W11130359 Washer Suspension Rod Kit. This high-quality aftermarket replacement supports the washer tub and absorbs movement during wash and spin cycles. Worn or broken suspension rods can cause loud banging noises, excessive shaking, or unbalanced loads. Replacing them with this reliable XPARTCO kit ensures balanced performance and extends the life of your washer. Replaces Part Numbers W11130359, W11027215, 4813873, W10594082, W10785954, W10821704, W10901060, W11033536, W11226784, AP6261901, PD00042502, EAP12347544, PS12347544. Compatibility This replacement suspension rod kit fits select Whirlpool, Maytag, Amana, Crosley, and Roper top-load washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC565FW0, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to match OEM performance and stability 🌀 Reduces Vibration – Keeps washer tub balanced during spin cycles 💰 Cost-Effective Solution – High-quality kit at a lower cost than OEM parts 🛠️ Complete Kit – Includes four suspension rods, bushings, and suspension springs 🛡️ Fixes Common Issues – Solves excessive shaking, banging, or unbalanced load problems 📐 Product Specification Part Number: W11130359 Component Type: Washer Suspension Rod Kit Includes: 4 suspension rods with springs and mounting bushings Material: Heavy-duty steel with corrosion-resistant coating Mounting: Direct-fit installation under washer tub Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, socket wrench ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock or injury. Steps: Disconnect power and remove the washer lid or top panel. Support the washer tub with a sturdy object or strap. Remove the old suspension rods from their mounting holes. Install the new XPARTCO W11130359 rods one by one, attaching springs and bushings. Reassemble panels, plug in the washer, and run a test cycle to confirm smooth operation. ⏱️ Time Required: 30–40 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Eliminate noise and vibration — Add to Cart Now for a stable, long-lasting repair!

Read more less

XPARTCO W11175771 Dishwasher Water Valve  Replaces Part Numbers: W11175771, W10195047, W10327250, W10872255, W11130744, AP6339872, PS12578165, WPW10327249, W10327249, W10316814, 3015511, W11130743, AP6019618, PS11752927. 120V, 3/4" GHT inlet, 1/2" push on outlet. Also replaces WPW10327249 Fits select Kenmore, Maytag, Whirlpool dishwasher models Description: This Water Inlet Valve is a replacement part for select Kenmore, Maytag, Whirlpool dishwasher models. This component controls the flow of water into the dishwasher, functioning to ensure the right amount of water is supplied during each wash cycle. The valve operates via electronic controls from the dishwasher, responding to the needs of various cycles and adjustments in water pressure. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W11210459 Washer Water Inlet Valve - Compatible with Whirlpool, Kenmore, Maytag, Amana Product Description Maintain your washer’s performance with the W11210459 Washer Water Inlet Valve. This valve assembly is designed as a replacement for select Whirlpool, Kenmore, Maytag, Amana, and other compatible washing machines, offering a cost-effective alternative to the original. It controls the flow of hot and cold water into the washer during wash and rinse cycles, ensuring proper filling and efficient operation. This part addresses issues like leaking water, slow or no water fill, inconsistent water temperature, or overflow, often caused by a faulty or clogged valve. Note: Includes (1) water inlet valve assembly with two solenoids (hoses and clamps not included). Disconnect power and water supply before installation. Verify compatibility with your washer model. Replaces part numbers: W11210459, W10701459, W10838319, W11038711, 4591321, W10869799, W11025984, PD00042885, EAP12349267, AP6329217, PS12349267.  Compatibility: Compatible with select washer models, including but not limited to: Whirlpool: WTW5000DW1, WTW4816FW2, WTW4616FW2, WTW4815EW1, WTW4816FW1 Kenmore: 110.25132411, 110.22352511 Maytag: MVWC565FW0, MVWC415EW1 Amana: NTW4516FW3 Crosley, Inglis, Roper: Various models (verify with model number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Kenmore, Maytag, Amana, Crosley, Inglis, and Roper washing machines. 🔧 Specifications: High-quality water inlet valve with two solenoids, 110-120V, 60Hz, standard 3/4" hose fitting inlet. 💪 Reliable Performance: Controls hot and cold water flow for consistent wash and rinse cycles. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves leaking, slow or no fill, inconsistent water temperature, or overflow issues. Product Specification Part Number: XPARTCO W11210459 Component Type: Washer water inlet valve assembly Material: Plastic and metal Electrical Specs: 110-120V, 60Hz, two solenoids, standard 3/4" hose fitting inlet, two water outlets Compliance: Prop 65 warning for California. Installation Notes: Safety First: Disconnect the washer from the power source and water supply before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your washer running efficiently today! Add to cart now for a reliable fix!

Read more less

XPARTCO W11307244 Washer Lid Lock Assembly Product Title replacement XPARTCO W11307244 Washer Lid Lock Assembly - Compatible with Whirlpool, Maytag, Kenmore Washers Product Description Secure your washer’s lid and prevent unsafe operation with the replacement XPARTCO W11307244 Washer Lid Lock Assembly. This high-quality replacement assembly includes the lid lock switch and wire harness to ensure the washer detects the lid position and locks during cycles. Compatible with select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, and Jenn-Air washers, this assembly fixes issues like lid lock error codes, failure to start, or the washer not advancing cycles. Key Features: ✅ Broad Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, and Jenn-Air washer models. 🔥 Reliable Locking: Includes lid lock switch and wire harness for proper lid detection and secure operation. 💰 Cost-Effective Alternative: replacement assembly offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires basic tools (Phillips screwdriver) and 10–15 minutes for DIY repair. 🛡️ Fixes Common Issues: Resolves lid lock errors, washer not starting, or cycles not advancing. Compatibility: Compatible with models including but not limited to: Whirlpool: WTW5000DW1, WTW7120HW0, WTW8127LW0 Maytag: MVW7230HW0, MVW7232HW0 Kenmore: 110.25132411, 110.25132511 Replaces part numbers: W11307244, W10682535, W10838613, W10838613VP, W11253733, PD00048394, EAP12704713, AP6832601, PS12704713. Verify compatibility with your appliance brand and model number, please contact support for assistance. Installation Notes: Tools Needed: Phillips screwdriver, flathead screwdriver. Safety First: Unplug the washer before starting repairs to avoid electrical shock. Steps: Disconnect power and locate the lid lock assembly at the top front of the washer. Remove the top panel by unscrewing the rear screws and sliding it back. Disconnect the wire harness from the old lid lock assembly. Release the retaining tabs or screws securing the old assembly and remove it. Install the new W11307244 assembly, secure with tabs or screws, and reconnect the wire harness. Reinstall the top panel and test the washer. Installation takes 10–15 minutes. Caution: Ensure the wire harness is securely connected to avoid error codes. Shop for high-quality replacement appliance parts with free shipping on all orders and a 30-day return policy. Get your washer locking securely again today! Add to cart now for an affordable fix with free shipping on your entire order!

Read more less