XPARTCO H150 Furnace Silicon Nitride Rod Ignitor
The H150 universal gas furnace igniter come with a 1.95-inch ceramic nitride heating element, a 1.25-inch ceramic insulator, a 304 stainless steel bracket, and a 15.5-inch high temperature resistant wire(20 AWG). Voltage: 120V±10%-15%, 50/60HZ. Power Rating: 150W. Cold resistance: 9-17Ω. At 120V furnace igniter H150 can reach 1200 degrees in a short time
The H150 universal furnace igniter replacement can be used in a wide range of machines and is the perfect replacement for silicon carbide ignitors in water heater boilers and gas forced-air furnaces, replacing more than 180 types of ignitors and covering nearly 90% of all applications. Such as stoves, furnace, warm air motion, gas ignition, hot surface igniter, infrared light source, pool heater, boiler, etc
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
XPARTCO KSD201-120 Microwave Thermal Cutoff 120°C – Compatible with GE, Samsung, LG, Whirlpool & More
Product Description
Protect your microwave from overheating with the XPARTCO KSD201-120 Microwave Thermal Cutoff (120°C). This high-quality aftermarket Thermal Cutoff monitors internal temperatures and opens the circuit when the temperature exceeds 120°C (248℉), preventing damage to critical components such as the magnetron and control board. A failed thermostat can cause no-heat conditions, random shutdowns, or blown fuses. Replacing it with this reliable XPARTCO Thermal Cutoff restores proper thermal protection and safe operation.
Replaces Part Numbers
KSD201-120, KSD201 120C, KSD201-120°C, (model dependent)
Compatibility
This replacement microwave Thermal Cutoff is widely used across many microwave brands, including GE, Samsung, LG, Whirlpool, Kenmore, Frigidaire, and others that require a KSD201 120°C (248℉) thermal cutoff.
Common applications include magnetron, cavity, or exhaust temperature monitoring.
Always confirm temperature rating and mounting style before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM thermal cutoff performance
🌡️ 120°C Temperature Rating – Opens circuit when unsafe temperatures are reached
🔥 Overheat Protection – Protects magnetron and internal microwave components
💰 Cost-Effective Solution – Reliable protection without OEM pricing
🛡️ Fixes Common Issues – Resolves random shutoffs, no-heat issues, or thermal fuse failures
📐 Product Specification
Part Number: KSD201-120
Component Type: Microwave Thermal Cutoff / Thermal Fuse
Temperature Rating: 120°C (248°F)
Switch Type: Normally Closed (NC)
Material: Metal housing with bimetal thermal disc
Terminals: 2-terminal spade connectors
Mounting: Screw-mounted
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Unplug the microwave and discharge high-voltage components before servicing. Microwaves contain HIGH VOLTAGE even when unplugged.
Steps:
Disconnect power and remove the microwave outer cover.
Locate the thermostat mounted near the magnetron or cavity wall.
Disconnect wires and remove mounting screws.
Install the new XPARTCO KSD201-120 thermostat in the same position.
Reconnect wiring, reinstall the cover, and restore power.
Test microwave operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore safe microwave operation with proper thermal protection — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO LA1053 Dryer Thermostat Kit – Replaces LA-1053 – Compatible with Whirlpool, Maytag, Admiral, and Amana Dryers
Product Description
Restore proper dryer temperature control with the XPARTCO LA1053 Dryer Thermostat Kit. This Dryer Thermostat Kit is a replacement part for specific Maytag, Whirlpool dryer models. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (53-0771) and two thermal fuses.
53-1096 (blue dot for Gas)
53-1182 (Red dot for Electric)
Replaces Part Numbers
LA-1053, 3344, 53-0143, 53-0170, 53-0261, 53-1133, 53-1526, AH2162282, EA2162282, ERLA1053, ET403, ET405, K35-601, LA-1053VP, LA1053, SET405, TJ90SET405, 531526, 531182, 531133, 530261, LA1053, 530143, WP53-1182, 53-1182, 53-0143, 53-1096 , L248-80F, PD00002446, EAP2162282, AP4242472, PS2162282, WP53-0771, 53-0771, 1422, 53-0306, 53-1037, 53-1459, ER53-0771, SET176, TJSET176, AP6009638, PS11742806, WP53-1096, 53-1096, 4434853, AP6009640, PS11742808.
Compatibility
This replacement thermostat kit fits select Whirlpool, Maytag, Admiral, and Amana dryers.
Example compatible models include (but are not limited to): Maytag DE303, Whirlpool LDE8824ACE, and Amana LEA30AW.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Compatibility – Compatible with Whirlpool, Maytag, Admiral, and Amana dryers
🔥 Complete Kit – Includes cycling thermostat, high-limit thermostat, and thermal fuse. Dryer thermal fuse and high limit thermostat kit for both gas and electric models. If the dryer does not heat then the thermal fuse may have blown and will need to be replaced.
💰 Cost-Effective Repair – Replaces multiple components in one package
🛠️ Easy to Install – Direct-fit parts require only basic tools
🛡️ Fixes Common Issues – Resolves dryers not heating, overheating, or shutting off early
📐 Product Specification
Part Number: LA1053
Component Type: Dryer Thermostat and Thermal Fuse Kit
Material: Heat-resistant metal with high-quality electrical connectors
Mounting: Direct-fit replacement on heater housing and blower housing
Operating Conditions: Designed for residential electric dryers
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before performing any repairs to prevent electrical shock.
Steps:
Unplug the dryer and remove the rear access panel.
Locate the thermostat and thermal fuse on the heater housing.
Remove screws securing the old components and disconnect wires.
Install the new thermostats and fuse from the XPARTCO LA1053 kit.
Reconnect wiring, reinstall the back panel, and restore power.
Run a test cycle to confirm proper heating and temperature control.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Get your dryer running safely and efficiently again — Add to Cart Now for a reliable, budget-friendly repair kit!
XPARTCO MDS47123602 Washer Door Boot Gasket – Compatible with LG Front-Load Washers
Product Description
Stop leaks and restore proper sealing with the XPARTCO MDS47123602 Washer Door Boot Gasket. This high-quality aftermarket replacement forms a watertight seal between the washer door and tub, preventing water from leaking during wash and spin cycles. A worn, torn, or mold-damaged gasket can lead to leaks, odors, or excessive vibration. Replacing it with this durable XPARTCO gasket provides long-lasting protection and reliable washer performance.
Replaces Part Numbers
MDS47123602, MDS64237201, MDS64237202, MDS47123612, EAP3535210, PD00028934, AH3535210, EA3535210, AP5218575, PS3535210.
Compatibility
This replacement door boot gasket fits select LG front-load washers.
Example compatible models include (but are not limited to):LG WM2650HWA, WM3470HVA, WM3570HWA, WM8000HVA, and WM3997HWA.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and sealing performance
💧 Leak-Proof Design – Forms a tight seal to prevent water escaping from the washer door
🌿 Mold-Resistant Material – High-grade rubber reduces mildew and odor buildup
🛠️ Durable Construction – Built to withstand heat, detergent, and high-spin vibration
🛡️ Fixes Common Issues – Solves leaks, mold/mildew odor, door seal tears, or water pooling
📐 Product Specification
Part Number: MDS47123602
Component Type: Washer Door Boot Gasket (Door Seal)
Material: High-strength, mold-resistant rubber
Color: Gray (standard for LG models)
Mounting: Installed between front tub and door frame using clamps
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, spring clamp tool (recommended), pliers
⚠️ Safety First: Always unplug the washer before installation to prevent electrical shock.
Steps:
Remove the washer top and front panel for access.
Release the outer retaining spring clamp and remove the old gasket edge.
Detach the inner clamp from the tub and remove the old gasket completely.
Align and install the new XPARTCO MDS47123602 gasket around the tub opening.
Reinstall inner clamp, then secure the outer clamp around the door frame.
Reassemble the washer and perform a quick rinse cycle to test for leaks.
⏱️ Time Required: 30–45 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop washer leaks the right way — Add to Cart Now for a durable, budget-friendly replacement!
XPARTCO MFG63099101 Washer Door Strike – Compatible with LG Washers
Product Description
Ensure your washer door latches securely with the XPARTCO MFG63099101 Washer Door Strike. This durable aftermarket replacement attaches to the washer door and engages with the door lock assembly, allowing the washer to start and operate safely. Common causes of a bad door strike can include regular wear and tear from frequent use, impact or mishandling that leads to bending or breaking, or issues with the door alignment that cause undue stress on the strike.
Replaces Part Numbers
MFG63099101, 2759645, AGF77417823, PD00046132, EAP8752721, AP5787149, PS8752721.
Compatibility
This replacement door strike fits select LG front-load washers.
Example compatible models include (but are not limited to): LG WM3470HWA, WM3370HWA, WM3570HVA, and WM4270HWA.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM fit, strength, and performance
🚪 Restores Proper Door Latching – Ensures washer can start and lock cycles safely
💰 Cost-Effective Solution – Durable substitute for expensive OEM strikes
🛠️ Easy Installation – Mounts directly to washer door using existing hardware
🛡️ Fixes Common Issues – Solves door-locking errors, cycle interruptions, or washer not starting
📐 Product Specification
Part Number: MFG63099101
Component Type: Washer Door Strike
Material: High-strength molded plastic
Mounting: Screw-in installation using existing door hardware
Color: White or off-white (varies by batch)
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock.
Steps:
Disconnect power to the washer.
Open the door and locate the existing door strike.
Remove screws securing the damaged strike.
Position the new XPARTCO MFG63099101 strike and align mounting holes.
Secure with screws, close door, and restore power.
Run a short cycle to confirm proper door locking.
⏱️ Time Required: 5–10 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore safe and secure washer operation — Add to Cart Now for a quick, reliable fix!
XPARTCO MHY62044106 Refrigerator Door Mullion Spring - Compatible with LG, Kenmore Refrigerators
Product Description
Restore proper sealing in your refrigerator with the replacement MHY62044106 Refrigerator Door Mullion Spring. This high-quality spring, designed for LG and Kenmore French-door refrigerators, ensures the mullion flap closes securely, maintaining an airtight seal between the doors to prevent energy loss and maintain cooling efficiency. Made of heavy-duty steel with a clockwise winding and 6 coils, this spring fits into the mullion hinge to resolve issues like doors not closing properly, mullion flap misalignment, or beeping alarms.
Note: Includes one spring. Disconnect power before installation.
Replaces part numbers: MHY62044106, 2676261, MHY62044104, PD00035635, EAP6012670, AP5657415, PS6012670
Compatibility:
Compatible with models including but not limited to:
LG: LFC25765ST, LFX21976ST, LFX25973ST, LFX25976ST, LFX25978SB, LFX25978ST, LFX25991ST, LFX28968SB, LFX28968ST, LFX28978SB, LFX28978ST, LFX28979ST, LFX31925SB, LFX31925ST, LFX31935ST, LFX31945ST, LMX28988ST, LMX31985ST
Kenmore: 795.71054.010, 795.71056.011, 795.71063.011
Other LG models: GF-B620BSL, GF-B620PL, GF-D613SL, GF-L613PL, GM-F208ST, GR-L218ASL, GR-L218CSL
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select LG and Kenmore French-door refrigerator models.
🔥 Specifications: replacement mullion spring, clockwise wound, 6 coils, heavy-duty steel, approximately 1-1/8" long, two legs (one shorter for door side), corrosion-resistant.
💰 Cost-Effective Alternative: replacement spring offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, pliers, work gloves; typically installed in 15–30 minutes.
🛡️ Reliable Fixes: Resolves doors not closing, mullion flap misalignment, beeping alarms, or cooling inefficiencies.
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Ensure your refrigerator seals perfectly today!
Add to cart now for a budget-friendly fix!
XPARTCO S97018253 Range Vent Hood Light Fuse
The replacement S97018253 Range Vent Hood Light Fuse is designed for select Broan range hood models. This replacement fuse protects the range hood’s light circuit from power surges or faults. Ideal for restoring functionality to select Broan range hoods experiencing light-related issues, such as non-functioning lights or intermittent power.
Note: Disconnect power before installation. Handle glass fuse carefully.
Replaces part numbers: S97018253, 1930589, 97018253, AP5616207, PS10280886.
Compatibility (S97018253):
Compatible with select Broan range hood models, including but not limited to:
Broan: QP2, QP3, QP4 series (e.g., QP230BC, QP230BL, QP230SS, QP236BC, QP236BL, QP236SS, QP236WW, QP242BC, QP242BL, QP242SS, QP242WW, QP330BL, QP330SS, QP330WW, QP336BL, QP336SS, QP336WW, QP342BL, QP342SS, QP342WW, QP430SS, QP436SS, QP442SS)
Verify your model number or contact our support team for assistance.
Key Features (S97018253):
✅ Brand Compatibility: Fits select Broan range hood models.
🔥 Specifications: Replacement fuse, 8A, 120V, glass fuse (5x20mm), heat-resistant.
💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price.
🛠️ Easy Installation: Requires basic tools (e.g., screwdriver, pliers); typically installed in 10–15 minutes.
🛡️ Reliable Fixes: Addresses range hood light issues like non-functioning lights or intermittent power.
Installation Notes (S97018253):
Safety First: Disconnect the appliance from the power source before installation.
Location: Typically found in the upper left corner of the range hood control board; remove filters and bottom pan to access.
Tools: Use a screwdriver to access the control board and pliers to remove and install the fuse.
Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Get your microwave or range hood running today!
Add to cart now for a budget-friendly fix!
XPARTCO S99527471 Hood Fuse – Compatible with Broan, Nutone, and Kenmore Range Hoods
Product Description
Protect your vent hood’s electrical system with the XPARTCO S99527471 Hood Fuse. This high-quality aftermarket replacement safeguards your range hood’s control board, fan motor, and lights from electrical surges and overheating. A blown fuse can cause the fan or light to stop working. Replacing it with this reliable XPARTCO fuse restores safe, efficient operation at a fraction of the OEM cost.
Replaces Part Numbers
S99527471, AP5611426, 1931293, PS10281737, 99527471.
Compatibility
This replacement hood line fuse fits select Broan, Nutone, and Kenmore range hoods.
Example compatible models include (but are not limited to): Broan QP230SS, Nutone RL6200 Series, and Kenmore 233.52343310.
Always verify your range hood’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to meet OEM safety and performance standards
⚡ Electrical Protection – Prevents power surges from damaging internal components
💰 Cost-Effective Solution – High-quality fuse at a lower price than OEM parts
🛠️ Quick Installation – Direct-fit design for easy DIY replacement
🛡️ Fixes Common Issues – Restores power to hood lights or fan after fuse failure
📐 Product Specification
Part Number: S99527471
Component Type: Range Hood Line Fuse
Material: Ceramic fuse with insulated metal terminals
Mounting: Inline wiring harness or fuse holder on control board
Operating Conditions: Rated for high-temperature kitchen environments
Compliance: Built to OEM-equivalent quality and safety standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Always unplug the range hood or turn off power at the circuit breaker before servicing to prevent electrical shock.
Steps:
Disconnect power and remove the control panel or cover.
Locate the fuse on the wiring harness or control board.
Gently remove the blown fuse using pliers.
Install the new XPARTCO S99527471 fuse securely in place.
Reassemble the cover, restore power, and test operation.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore your range hood’s safety and performance — Add to Cart Now for a reliable, affordable replacement!
XPARTCO W10083957V Dishwasher Chopper Blade
Replaces Part Numbers: W10083957V, WP8268383, W10083957, 8268383, AP5983779, PS11722146.
This Food Chopper is a replacement part that is compatible with various Whirlpool dishwasher models. This food chopper is designed to grind and chop food particles during the wash cycle, preventing clogs and ensuring a thorough clean.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO W10111905 Dryer Door Catch – Compatible with WPW10111905 Whirlpool, Maytag, Kenmore, Amana, Crosley, and Roper Dryers
Product Description
Keep your dryer door securely closed with the XPARTCO W10111905 Dryer Door Catch. This high-quality aftermarket replacement ensures your dryer door latches properly to prevent interruptions during drying cycles. A worn or broken catch can cause the door not to stay shut, stopping the dryer mid-cycle. Replacing it with this durable part restores safe, dependable operation.
Replaces Part Numbers
WPW10111905, W10111905, 1470216, 8572982, WPW10111905VP, PD00002890, EAP11748369, AP6015097, PS11748369.
Compatibility
This replacement door catch is compatible with select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Roper dryers.
Example compatible models include (but are not limited to): Whirlpool WED4815EW1, Maytag MEDC465HW0, and Kenmore 110.61202011.
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Compatible with major Whirlpool-brand dryers
🚪 Secure Door Closure – Keeps the door latched tightly during cycles
💰 Affordable Alternative – Cost-effective replacement built to OEM-equivalent standards
🛠️ Quick Installation – Snaps into place in minutes
🛡️ Fixes Common Issues – Resolves doors that won’t close, stay shut, or cause cycle interruptions
📐 Product Specification
Part Number: W10111905
Component Type: Dryer Door Catch
Material: High-strength molded plastic
Mounting: Snap-fit replacement on dryer cabinet
Operating Conditions: Designed for residential dryer use
Compliance: Built to OEM-equivalent quality (not OEM)
🛠️ Installation Notes
Tools Needed: Flathead screwdriver or needle-nose pliers (optional)
⚠️ Safety First: Always unplug dryer before starting repairs to prevent electrical shock.
Steps:
Unplug dryer and open the door.
Locate the door catch slot on the cabinet frame.
Remove the old catch by prying it out gently.
Align and press the new XPARTCO W10111905 catch firmly into place until it clicks.
Close and test the dryer door to ensure a secure latch.
⏱️ Time Required: 5 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Stop dealing with doors that pop open mid-cycle — Add to Cart Now for a durable, budget-friendly replacement!
XPARTCO W10112954 Dryer Drum Belt – Replacement for Whirlpool, Maytag, Amana, and More
Product Overview
This Dryer drive Belt is a replacement part that is guaranteed to keep your dryer running smoothly. Compatible with a range of Whirlpool dryer models, including brands such as Whirlpool, Kenmore, and Maytag. This Drive Belt is an essential component that helps your dryer drum rotate efficiently, ensuring optimal drying performance.
Made in USA – Durable, high-grade construction
Replaces Part Numbers
This drum belt replaces part numbers WPW10112954, W10112954, 1447719, AP6015116, PS11748388.
It matches original specifications for length, width, and tension to ensure proper operation.
Compatible Brands
Compatible with many dryers from Whirlpool, Maytag, Amana, Crosley, Admiral, and Kenmore (Whirlpool-built). Fits a range of front-load and top-load electric and gas dryer models.
Key Features:
✅ Made in USA – Durable, high-grade construction
🔁 Replaces: WPW10112954, AP6015092, PS11748690
🧰 Easy to install – fits Whirlpool, Kenmore, Maytag & more
📦 Built to OEM standards for a long-lasting fit
⚠️ Unplug appliance before servicing. Contact us to confirm model compatibility.
💯 30-Day Money Back Guarantee🔧 Part Number: W10112954
Fixes the Following Issues
Dryer drum won’t spin
Belt is visibly cracked, frayed, or broken
Dryer makes thumping or squealing sounds
Motor runs but clothes stay stationary
Why Buy from Parts‑O‑Matic
Cost-effective aftermarket solution
Fast and free U.S. shipping
Trusted by professional repair technicians and DIYers
Easy returns and dependable customer service