Appliance Parts

Genuine OEM A00126401 Dishwasher Drain Pump Motor - Compatible with Frigidaire, Electrolux, Kenmore, and More Product Description Ensure your dishwasher drains effectively with the Genuine OEM A00126401 Dishwasher Drain Pump Motor. This high-quality OEM drain pump assembly, designed for Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and White-Westinghouse dishwashers, removes water from the tub through the drain hose at the end of each cycle. Made of durable plastic, metal, and rubber, it includes the pump motor, impeller, seal, and valve flapper, fixing issues like water pooling at the bottom, unusual grinding or humming noises, or the dishwasher failing to start due to residual water.  Note: Includes one drain pump motor assembly with impeller, seal, and valve flapper. Check the drain hose for clogs and clean debris from the sump assembly before installation. Take photos of wiring and hose connections during disassembly. Replaces part numbers: A00126401, 154736201, 3015405, 5304492415, PD00000922, EAP2363535, AP5690431, PS8689824. Compatibility: Compatible with models including but not limited to: Frigidaire: FGHD2465NF0A, FGHD2465NF1A, FGID2466QF0A, FGID2474QF0A, FGID2476SF0A, FPHD2491KF0, FFBD2406NB0A, FFBD2406NS0A Crosley: CDB350NB0A, CDB350NW0A Verify your model number or contact support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Kenmore, Tappan, and White-Westinghouse dishwasher models. 🔥 Specifications: OEM drain pump motor assembly, 120V, 60Hz, 35W, 0.8A, 3600RPM. 💰 Genuine OEM Quality: Authentic Frigidaire part ensures perfect fit and reliable performance. 🛠️ Easy Installation: Requires a Phillips screwdriver, flat-blade screwdriver, needle-nose pliers, drain pan; typically installed in 15–45 minutes. 🛡️ Reliable Fixes: Resolves water pooling, grinding or humming noises, or failure to start due to residual water. Installation Notes: Safety First: Unplug the dishwasher and shut off the water supply before installation. Shop Parts-O-Matic for high-quality OEM appliance parts with a 30-day return policy. Keep your dishwasher draining perfectly today! Add to cart now for a reliable OEM fix!

Read more less

XPARTCO DC97-16350V Washer Suspension Rod Kit (Set of 4) The XPARTCO DC97-16350V is an aftermarket replacement washer suspension rod kit (set of 4) compatible with select Samsung top-load washers in the WA48, WA50, WA52, and WA54 series. The suspension rods are spring-loaded shock-absorbing rods that connect the outer tub to the top of the washer cabinet, suspending the tub and dampening the vibrations generated during agitation and high-speed spin cycles. All four rods work together to keep the tub centered and stable — when one or more rods weaken, break, or lose their spring tension, the tub swings off-center and strikes the cabinet walls, causing violent shaking, banging, error code dc (out of balance), UE imbalance errors, and progressive damage to the washer cabinet and internal components. Each rod is 27.5 inches in overall length and is constructed from spring steel with a plastic top cap and bottom cup that clip into the tub and cabinet mounting points. The kit includes all 4 suspension rods — always replace all four at the same time since the rods wear at the same rate. Installs in 20–30 minutes — no special tools required. Note: rods are coated with grease — wear gloves during installation. Quick Answer The XPARTCO DC97-16350V Washer Suspension Rod Kit fixes Samsung top-load washers that vibrate violently, bang loudly, walk across the floor, display dc or UE imbalance error codes, or stop mid-cycle during spin. Set of 4 rods, 27.5" overall length, spring steel. Replace all 4 at the same time. Wear gloves — rods are greased. Compatible with Samsung WA48, WA50, WA52, and WA54 series. Replaces DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611 Common Problems This Kit Fixes Washer vibrating violently or shaking excessively during the spin cycle Loud banging or thumping — tub striking the cabinet walls during spin Washer "walking" or moving across the floor during high-speed spin Error code dc displayed — Samsung out-of-balance error during spin Error code UE displayed — unbalanced load error the washer cannot correct Washer repeatedly stopping and rebalancing the load without completing the spin cycle Visible broken, detached, or sagging suspension rod visible inside the cabinet Rattling or clunking noise during agitation — tub no longer centered Replaces Part Numbers This suspension rod kit directly replaces the following OEM and cross-reference part numbers: DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This suspension rod kit is compatible with select top-load washers from the following Samsung series: Samsung WA48 series — WA48H7400AW, WA48H7400AP, WA48J7700AW, WA48J7770AP and related models Samsung WA50 series — WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50R5200AW, WA50R5400AV, WA50T5300AC and related models Samsung WA52 series — WA52A5500AV, WA52A5500AW, WA52A5500AC and related models Samsung WA54 series — WA54R7200AV, WA54R7200AW, WA54R7600AC, WA54R7600AV, WA54R7600AW, WA5AR7200AV and related models Samsung WA45 series — WA45H7000AW, WA45K7600AW, WA45M7050AW (select models) Kenmore / Sears top-load washers (select Samsung-built models) Important: Samsung uses several different suspension rod lengths across its top-load washer lineup. The DC97-16350V is 27.5 inches long and is for larger-capacity WA48–WA54 series models. Shorter-capacity models (WA40–WA45) typically use DC97-16350C or DC97-16350U rods. Always verify your model number before ordering to confirm you need the 27.5-inch version. Key Features Set of 4 suspension rods — complete replacement kit covering all four tub mounting points Suspends and centers the outer tub within the cabinet — dampens agitation and spin vibration to prevent tub-to-cabinet contact Resolves Samsung error codes dc (out of balance) and UE (unbalanced load) 27.5 inches overall length — correct size for WA48, WA50, WA52, and WA54 series Samsung top-load washers Spring steel construction with plastic top cap and bottom cup — durable and corrosion resistant Rods are pre-coated with grease — wear work gloves during installation Replace all 4 rods at the same time — rods wear together and partial replacement leads to uneven tub support No special tools required — installs in 20–30 minutes Replaces DC97-16350V, AP6975426, EAP12740434, PS12740434, ASM34760, PD00071611, and more Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number DC97-16350V Part Type Washer Suspension Rod and Spring Assembly Condition Aftermarket Replacement Application Samsung Top-Load Washers — WA48, WA50, WA52, WA54 series Quantity Set of 4 (replace all four rods at the same time) Rod Length 27.5 inches overall Material Spring steel / Plastic / Metal Color Black / Silver / Gray Lubrication Pre-coated with grease — wear gloves during installation Error Codes Resolved dc (out of balance), UE (unbalanced load) Compatible Brands Samsung, Kenmore (Samsung-built) Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting — Wear Gloves Disconnect power and turn off the water supply before beginning. Wear work gloves throughout — the suspension rods are coated with grease. Remove the lid of the washer and the top panel (typically secured by screws under the lid hinge covers and at the rear corners). With the top panel removed, the four suspension rods are visible, each running from a mounting point on the tub rim up to a hook or bracket at the top corners of the cabinet frame. Note the orientation and attachment method of each rod before removing. Unhook the top of the old rod from the cabinet bracket and lift the bottom cup off the tub mounting pin. Install each new DC97-16350V rod by seating the bottom cup onto the tub mounting pin and hooking the top over the cabinet bracket. Replace all four rods before reassembling. Reinstall the top panel and lid, restore power and water, then run a spin cycle to verify smooth, stable operation. Tools needed: Phillips screwdriver; no special tools required for the rods themselves. Frequently Asked Questions What do the suspension rods do? The suspension rods are spring-loaded shock absorbers that hang the outer washer tub from the top corners of the cabinet frame. They suspend the tub in the center of the cabinet and absorb the vibrations and movement generated during agitation and high-speed spin cycles. As long as all four rods have equal spring tension, the tub stays centered and stable. When one or more rods lose tension, stretch, or break, the tub is no longer held evenly and begins to swing off-center during spin — striking the cabinet walls, causing the loud banging, vibration, and imbalance error codes that indicate the rods need replacement. Why must I replace all 4 rods instead of just the broken one? All four suspension rods experience the same amount of wear over the same number of wash cycles. When one rod fails, the remaining three have experienced the same stress and fatigue and are likely to fail soon after. Replacing only the broken rod leaves three worn rods supporting the tub unevenly, which can cause the new rod to wear faster and may not fully resolve the vibration problem. Replacing all four at the same time ensures even tub support, fully resolves the imbalance, and prevents a repeat repair in the near future. What do error codes dc and UE mean on Samsung washers? On Samsung top-load washers, error code dc (or sometimes dC) means the washer has detected an out-of-balance condition during the spin cycle and has stopped to prevent damage. Error code UE means an unbalanced load that the machine cannot automatically correct by redistributing. Both codes can be caused by an actual overloaded or unevenly distributed laundry load — but if the errors occur frequently even with normal loads and proper load distribution, worn or broken suspension rods are the most common mechanical cause. Replacing the rod kit resolves these errors in most cases. How is the DC97-16350V different from DC97-16350U or DC97-16350S? The DC97-16350V, DC97-16350U, and DC97-16350S are all Samsung suspension rods, but they have different lengths for different washer model generations and capacities. The DC97-16350V is 27.5 inches long and is used on larger-capacity WA48–WA54 series Samsung washers. The DC97-16350U is approximately 26.4 inches and is used on mid-capacity WA45–WA50 series models. The DC97-16350S and DC97-16350C are shorter versions for earlier or smaller-capacity models. Using the wrong length rod can cause the tub to sit at the incorrect height inside the cabinet. Always verify your model number before ordering to confirm the correct rod length. Is this an OEM or aftermarket part? This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from spring steel with plastic end caps to match the length and spring tension of the original DC97-16350V suspension rods. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO DA32-00006S Refrigerator Temperature Sensor – Compatible with Samsung Refrigerators Product Description Restore accurate temperature monitoring and consistent cooling with the XPARTCO DA32-00006S Refrigerator Temperature Sensor. This high-quality aftermarket replacement (also known as a thermistor) measures internal refrigerator or freezer temperatures and sends precise feedback to the control board. A failed or inaccurate sensor can cause temperature fluctuations, over-freezing, warm compartments, or error codes. Replacing it with this reliable XPARTCO sensor helps maintain stable temperatures and proper refrigerator operation. fits select Samsung Refrigerator models XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and performance. Replaces Part Numbers DA32-00006S, PD00002153, EAP4138590, AP4308802, PS4138590. Compatibility This replacement refrigerator temperature sensor fits select Samsung refrigerators. Commonly used in fresh food or freezer compartments depending on model. Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM resistance and response specifications 🌡️ Accurate Temperature Sensing – Helps maintain consistent cooling ❄️ Fixes Cooling Issues – Resolves temperature swings and sensor-related errors 🧩 Direct-Fit Design – Installs easily without modification 💰 Cost-Effective Repair – Reliable alternative to OEM temperature sensors 📐 Product Specification Part Number: DA32-00006S Component Type: Refrigerator Temperature Sensor (Thermistor) Function: Measures and reports internal temperature Application: Refrigerator or freezer compartment (model dependent) Connector Type: Plug-in wire harness Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Unplug the refrigerator before servicing to avoid electrical shock. Basic Steps: Disconnect refrigerator power. Access the sensor location inside the compartment or behind the panel. Disconnect the old temperature sensor from the wiring harness. Remove the old sensor and install the new XPARTCO DA32-00006S sensor. Reconnect wiring, reassemble panels, and restore power. Allow several hours for temperatures to stabilize. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore accurate temperature control and reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO 8573713 Gas Dryer Thermal Cut-Off Fuse Gas Dryer Thermal Cut-Off Fuse   Replaces Part Numbers: WP8573713, 8573713, AP6013467, PS11746693. Description: This Thermal Cut-Off is a replacement part for select Maytag, Whirlpool dryer models. It serves as a crucial safety component, automatically disconnecting power to the dryer's heating element if temperatures rise too high. This protects against overheating that could potentially cause a fire.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO WR07X10097 Refrigerator Compressor Overload Relay – Compatible with GE, Hotpoint, and Kenmore Refrigerators Product Description Restore proper compressor protection and reliable cooling with the XPARTCO WR07X10097 Refrigerator Compressor Overload Relay. This Start Device Assembly is a replacement part for Specific refrigerator models. It is a kit that includes the start relay and overload, both of which are crucial components for the proper operation of the compressor. The start relay is responsible for initiating the compressor's operation by providing an electrical boost to start the motor. The overload, on the other hand, acts as a protective device. It monitors the current flow and protects the compressor from overheating or electrical overload. Replaces Part Numbers WR07X10097, 1265640, AH1766101, EA1766101, PD00008007, EAP1766101, AP4300623, PS1766101. Compatibility This replacement compressor overload relay fits select GE, Hotpoint, and Kenmore refrigerators. Example compatible models include (but are not limited to):GE GTS18HGTHWW, GTS22KGNRWWHotpoint HSS25GFTSAKenmore 363.9557710 Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM electrical protection performance 🔌 Compressor Safety Protection – Prevents overheating and electrical overload damage 🔇 Reduces Clicking Issues – Helps resolve start-up clicking or compressor cycling 💰 Cost-Effective Solution – Reliable alternative to OEM parts 🛡️ Fixes Common Issues – Solves compressor not starting, intermittent cooling, or shutdowns 📐 Product Specification Part Number: WR07X10097 Component Type: Refrigerator Compressor Overload Relay Material: Heat-resistant housing with internal thermal protection Mounting: Direct-fit on compressor terminals Function: Overcurrent and overheat protection Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool. Steps: Disconnect power and remove the rear lower access panel. Locate the overload relay attached to the compressor terminals. Carefully disconnect the old relay. Install the new XPARTCO WR07X10097 overload relay securely. Reinstall the access panel and restore power. Allow several minutes for compressor startup. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your refrigerator compressor and restore reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

4TM-D14 Refrigerator / Freezer Compressor Overload Refrigerator / Freezer Thermal Overload Protector Replaces Part Numbers: WP4344040, 4344040, 10377011, 10377015, 14251316, 4343849, 4357157, 4434376, 61001898, 68001203, R0213308, AP6009230, PS11742383. Description: This Overload is a replacement for specific refrigerator models. It is an important component of the refrigerator's compressor system, providing protection against electrical overload. The overload helps safeguard the compressor from excessive electrical currents, preventing potential damage and ensuring the longevity of the refrigerator. It acts as a safety measure by interrupting the power supply to the compressor when necessary. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 338906 Gas Dryer Flame Sensor Replaces WP338906 The XPARTCO 338906 is an aftermarket replacement gas dryer flame sensor compatible with a wide range of Whirlpool-family gas dryers including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Roper, Inglis, Crosley, Estate, Caloric, Magic Chef, Norge, and Speed Queen. The flame sensor is a radiant sensor located in the burner assembly directly across from the gas igniter. It monitors heat output from the igniter and signals the gas valve to open once the igniter reaches ignition temperature. This is a critical safety mechanism — the gas valve will not open until the sensor confirms the igniter is hot enough to light the gas, preventing dangerous unburned gas buildup inside the dryer. When the flame sensor fails, the igniter may glow but the gas valve will never open — resulting in a dryer that tumbles but produces no heat. The sensor should show closed continuity (near-zero resistance) at room temperature when tested with a multimeter — an open reading confirms the sensor has failed. This part directly replaces WP338906 and a large number of older cross-reference numbers including DC32-00008A, Y303377, 14205529, and 3-3377. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO 338906 Gas Dryer Flame Sensor fixes gas dryers that tumble but produce no heat, where the igniter glows but the burner never lights. Located in the burner assembly across from the igniter. Should show closed continuity at room temperature — test with a multimeter before replacing. Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, and many more. Replaces WP338906, DC32-00008A, Y303377, 14205529, and more. Common Problems This Part Fixes Gas dryer tumbles but produces no heat — igniter glows but burner never lights Dryer takes multiple cycles or extremely long time to dry clothes Igniter glows and shuts off repeatedly without the burner ever firing Burner lights on first cycle but fails to relight during subsequent heat cycles Dryer shuts off heat mid-cycle — clothes still damp after a full cycle No heat even though the igniter, gas valve coils, and thermal fuse all test good Replaces Part Numbers This flame sensor directly replaces the following OEM and cross-reference part numbers: WP338906, 338906, 14205529, 14210083, 14218928, 3-3377, 303377, 35001096, 56231, 63-5013, DE353, ER338906, K35-194, R0611503, TJ90DE353, WP338906VP, Y303377, Y56231, AWP47560, PD00002361, AP6008294, PS11741429, DC32-00008A, AP4201717, PS4204985, 6501EL3001A, EBD62566701, ALG52234, EAP3529181, PD00007476, AP4443773, PS3529181, 5303281135, 00635993, AFR17080, EAP459818, PD00007469, AP2142636, PS459818. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This flame sensor is compatible with select gas dryers only from the following brands: Whirlpool gas dryers Kenmore / Sears gas dryers (Whirlpool-built models) Maytag gas dryers Amana gas dryers KitchenAid gas dryers Jenn-Air gas dryers Admiral gas dryers Roper gas dryers Inglis gas dryers Crosley gas dryers Estate gas dryers Caloric, Magic Chef, Norge, and Speed Queen gas dryers Note: This part is for gas dryers only. Electric dryers do not use a flame sensor or gas valve system. Key Features Radiant flame sensor — monitors igniter heat and signals the gas valve to open once ignition temperature is reached Critical safety device — prevents the gas valve from opening until it is safe to ignite, protecting against unburned gas buildup Located in the burner assembly directly across from the gas igniter Should show closed continuity (near-zero resistance) at room temperature — test with a multimeter before replacing Replaces WP338906 and over 20 older cross-reference part numbers across multiple brand families Compatible with over a dozen major appliance brands on the Whirlpool platform Often replaced together with the gas valve coils (279834) and igniter (279311) for a complete burner repair Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number 338906 OEM Part Number WP338906 Part Type Gas Dryer Flame Sensor (Radiant Sensor) Condition Aftermarket Replacement Application Gas Dryers Only Location Burner assembly, across from the gas igniter Normal Behavior Closed continuity (near-zero resistance) at room temperature Failed Behavior Open circuit (infinite resistance) — gas valve will not open Sold As Single flame sensor Compatible Brands Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Jenn-Air, Admiral, Roper, Inglis, Crosley, Estate, Caloric, Magic Chef, Norge, Speed Queen Often Replaced With 279834 Gas Valve Coils, 279311 Gas Igniter Installation Notes ⚠️ Gas Appliance Safety Warning This part is used in gas dryers. Always unplug the dryer and shut off the gas supply at the shutoff valve before beginning any repair. If you smell gas at any point during or after installation, leave the area immediately and contact your gas utility provider. If you are not comfortable working on gas appliances, have this part installed by a qualified appliance technician. ⚠️ Test Before Replacing — Verify the Sensor Has Failed Before replacing the flame sensor, test it with a multimeter. Set the multimeter to the continuity or resistance setting, disconnect the sensor from the wiring harness, and probe both terminals. A working sensor reads near-zero resistance (closed) at room temperature. An open circuit (infinite resistance) confirms the sensor has failed. If the sensor tests good, check the igniter, gas valve coils (279834), and thermal fuse before replacing this part. To install: unplug the dryer and shut off the gas. Remove the top panel and front panel to access the burner assembly. The flame sensor is a small bracket-mounted component located directly across from the igniter. Disconnect the sensor leads, unscrew the mounting screw, and install the new 338906 sensor in the same orientation. Reconnect the leads, reassemble the panels, restore gas and power, and run a test cycle to confirm heat. Tip: While the burner assembly is accessible, inspect and replace the gas valve coils (279834) and igniter (279311) if worn. Tools needed: Phillips screwdriver, 1/4" nut driver, multimeter. Frequently Asked Questions What does the dryer flame sensor do? The flame sensor is a radiant sensor located in the burner assembly across from the igniter. It monitors the heat being generated by the igniter and sends a signal to open the gas valve once the igniter is hot enough to safely ignite the gas. This is a critical safety mechanism — if the sensor does not confirm that the igniter is at ignition temperature, the gas valve will remain closed, preventing unburned gas from building up inside the dryer. A failed sensor means the gas valve never opens, so the igniter glows but the burner never fires. How do I test the 338906 flame sensor with a multimeter? Unplug the dryer and disconnect the flame sensor from the wiring harness. Set your multimeter to the continuity or ohms setting and probe both sensor terminals. At room temperature, a working 338906 flame sensor should show closed continuity — near-zero resistance. If your multimeter reads OL (open loop) or infinite resistance, the sensor has failed and needs to be replaced. Note: heat exposure can temporarily change the sensor reading, so always test at room temperature. My igniter glows but the burner never lights — is the flame sensor the cause? It often is. When the igniter glows repeatedly but the burner never fires, the most common causes are a failed flame sensor, failed gas valve coils (279834), or — less commonly — a failed gas valve. The flame sensor is the first part to test because it is inexpensive and easy to access. If the sensor tests open (no continuity), replace it. If it tests good, test the gas valve coils next. The igniter itself is less likely to be the cause if it is visibly glowing, but it can also weaken over time. Should I also replace the gas valve coils and igniter at the same time? It is highly recommended — especially if your dryer is older. The flame sensor, gas valve coils (279834), and igniter (279311) all work together in the burner system and wear at similar rates. Since the dryer is already disassembled, replacing all three together in a single repair (often sold as a gas dryer repair kit) is more cost-effective than replacing them one at a time over successive repair sessions. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the specifications and performance of the original WP338906 flame sensor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

22003483CM Washer Drive Belt Replaces Part Numbers:  WP22003483 22003483, 22002709, 62618130, 824667, AP6006365, PS11739438, WP22003483VP. Description: This Washer Drive Belt is a replacement part for select Maytag, Whirlpool top-load washer models. This belt connects the washer's motor to the drum, enabling the drum to rotate during the wash and spin cycles. It plays a crucial role in the washer's operation. Common causes of a bad washer drive belt can include wear and tear, stretching, or damage from overloading the washer.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

W10149355CM Surface Element Switch 240V, 15A for dual surface element. Fits select Maytag, Whirlpool free standing range models. Replaces Part Numbers:WPW10149355, W10149355, AP6015787, PS11749068. Description: The Infinite Switch is a replacement part for select Whirlpool ovens and range models. It is a crucial component that controls the flow of electricity to the heating elements, allowing for precise temperature regulation during cooking.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

5835EL1002A Dryer Genuine OEM Blower Wheel – Compatible with LG and Kenmore Dryers Product Description Improve airflow and restore efficient drying performance with the 5835EL1002A Dryer Genuine OEM Blower Wheel. This Blower Wheel is a Genuine OEM part for specific Kenmore, LG dryer models. This part circulates air through the dryer drum and out the exhaust vent, ensuring proper airflow for efficient drying of clothes. Replaces Part Numbers 5835EL1002A, 1268176, 5835EL1001A, 5835EL1001B, PD00001766, EAP3528491, AH3528491, EA3528491, AP4438881, PS3528491, DE1002A. Compatibility This Genuine OEM blower wheel fits select LG and Kenmore (LG-built) dryers. Example compatible models include (but are not limited to):LG DLE2516W, DLE1310W, DLE5955W, DLE5977W,Kenmore 796.80272900, 796.80311900, 796.80448900. Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for perfect fit and long-lasting durability 🌬️ Restores Proper Airflow – Ensures strong, consistent air movement through the dryer 🔇 Quiet Operation – Balanced impeller reduces vibration and noise 💪 Durable Construction – Molded from high-strength OEM polymer 🛡️ Fixes Common Issues – Solves long dry times, overheating, noisy operation, or poor airflow 📐 Product Specification Part Number: 5835EL1002A Component Type: Dryer Blower Wheel / Fan Wheel Material: OEM-grade reinforced plastic Mounting: Press-fit onto motor shaft Diameter: Approx. 8 inches (varies slightly by model) Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver, pliers ⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock. Steps: Disconnect dryer power and remove the front panel or blower housing cover. Access the blower assembly and inspect the existing wheel. Remove the old blower wheel from the motor shaft. Press the new 5835EL1002A blower wheel firmly onto the shaft. Reassemble all removed panels and restore power. Run a test cycle to confirm smooth airflow and reduced noise. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Improve your dryer’s airflow and performance — Add to Cart Now for a dependable, factory-quality repair!

Read more less

XPARTCO DA97-15765C Refrigerator Condenser Fan Motor Replaces Part Numbers: DA97-15765C, DA97-15765A, DA97-12842A, DA97-12842B, DA97-12842D, DA97-15765D, AP6001015, PS11733650. Description: This Refrigerator Condenser Fan Motor Assembly is an essential component designed to maintain optimal cooling performance in select Samsung refrigerator models. This replacement part ensures reliable operation by efficiently circulating air through the condenser coils, preventing overheating and maintaining consistent temperatures.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

4681JB1029D Refrigerator Genuine OEM Condenser Fan Motor Fits Specific LG, Kenmore Refrigerator Models Replaces Part Numbers: 4681JB1029D, EAU61644104, 1267566, AH3523330, EA3523330, OEM17751134, AP4437783, PS3523330. Description: This Condenser Fan Motor is a Genuine part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less