XPARTCO S99527471 Hood Fuse – Compatible with Broan, Nutone, and Kenmore Range Hoods Product Description Protect your vent hood’s electrical system with the XPARTCO S99527471 Hood Fuse. This high-quality aftermarket replacement safeguards your range hood’s control board, fan motor, and lights from electrical surges and overheating. A blown fuse can cause the fan or light to stop working. Replacing it with this reliable XPARTCO fuse restores safe, efficient operation at a fraction of the OEM cost. Replaces Part Numbers S99527471, AP5611426, 1931293, PS10281737, 99527471. Compatibility This replacement hood line fuse fits select Broan, Nutone, and Kenmore range hoods. Example compatible models include (but are not limited to): Broan QP230SS, Nutone RL6200 Series, and Kenmore 233.52343310. Always verify your range hood’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM safety and performance standards ⚡ Electrical Protection – Prevents power surges from damaging internal components 💰 Cost-Effective Solution – High-quality fuse at a lower price than OEM parts 🛠️ Quick Installation – Direct-fit design for easy DIY replacement 🛡️ Fixes Common Issues – Restores power to hood lights or fan after fuse failure 📐 Product Specification Part Number: S99527471 Component Type: Range Hood Line Fuse Material: Ceramic fuse with insulated metal terminals Mounting: Inline wiring harness or fuse holder on control board Operating Conditions: Rated for high-temperature kitchen environments Compliance: Built to OEM-equivalent quality and safety standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the range hood or turn off power at the circuit breaker before servicing to prevent electrical shock. Steps: Disconnect power and remove the control panel or cover. Locate the fuse on the wiring harness or control board. Gently remove the blown fuse using pliers. Install the new XPARTCO S99527471 fuse securely in place. Reassemble the cover, restore power, and test operation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your range hood’s safety and performance — Add to Cart Now for a reliable, affordable replacement!

Read more less

XPARTCO WB27X10542 Range Vent Hood Fuse – Compatible with GE and Hotpoint Range Hoods Product Description Protect your vent hood electronics from power surges and overheating with the XPARTCO WB27X10542 Range Vent Hood Fuse. This high-quality aftermarket replacement fuse interrupts electrical current when excessive heat or voltage occurs, safeguarding the control board and motor. A blown fuse can cause the vent hood lights or fan to stop working. Replacing it with this durable XPARTCO fuse restores safe, reliable operation at a fraction of the OEM cost. Replaces Part Numbers WB27X10542, 946789, AH239683, EA239683, PD00040792, AP3185501, PS239683. Compatibility This replacement line fuse fits select GE and Hotpoint range hoods. Example compatible models include (but are not limited to): GE JV347H1WW, GE JV348L1SS, and Hotpoint RVM1535DM1BB. Always verify your vent hood’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM performance for GE range hoods ⚡ Electrical Protection – Prevents control board and motor damage from power surges 💰 Budget-Friendly Fix – Reliable replacement at a lower cost than OEM 🛠️ Quick Installation – Direct-fit design requires only basic tools 🛡️ Fixes Common Issues – Solves power loss, fan not running, or lights not turning on 📐 Product Specification Part Number: WB27X10542 Component Type: Range Hood Line Fuse - FUSE 5 A 125V Material: Ceramic and metal fuse with insulated leads Mounting: Inline wiring harness or control board clip Operating Conditions: Rated for high-temperature kitchen environments Compliance: Built to OEM-equivalent safety standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, needle-nose pliers ⚠️ Safety First: Always unplug the range hood or switch off the circuit breaker before performing repairs to prevent electrical shock. Steps: Disconnect power to the range hood. Remove the cover or control panel to access the fuse holder. Carefully disconnect the old fuse from its terminals. Install the new XPARTCO WB27X10542 fuse in the same orientation. Replace the cover, restore power, and test operation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore safe vent hood operation — Add to Cart Now for a reliable, cost-effective repair!

Read more less

DG94-05220B Samsung Gas Range Control Board Description: The Gas Range Control Board is an OEM replacement part for Samsung gas ranges. This component is responsible for managing and coordinating the various functions of your gas range, including temperature regulation, burner ignition, and timer settings. The control board serves as the central hub that ensures the efficient and accurate operation of the range. Over time, control boards can fail due to electrical surges, wear and tear of internal circuits, or exposure to excessive heat. Faulty connections, damaged relays, or moisture infiltration may also compromise the board's functionality. Model Numbers it Applies to:  NX60A6511SG/AA-SAM     NX60A6511SG/AA-SAM     NX60A6511SG/AA-SAM     NX60A6511SG/AA-SAM     NX60A6511SG/AA-SAM     NX60A6511SS/AA-SAM     NX60A6511SS/AA-SAM     NX60A6511SS/AA-SAM     NX60A6511SS/AA-SAM    

Read more less

XPARTCO 5304512529 Microwave Door Switch – Compatible with Frigidaire, Electrolux, and Kenmore Microwaves Product Description Ensure safe and reliable operation with the XPARTCO 5304512529 Microwave Door Switch. This high-quality aftermarket replacement detects when the microwave door is closed, allowing the appliance to run safely. A faulty switch can cause the microwave not to start, stop mid-cycle, or operate with the door open — a serious safety concern. Replacing it with this durable XPARTCO switch restores proper interlock function and dependable performance. Replaces Part Numbers 5304512529, 4584691, PD00051808, EAP12365114, AP6278576, PS12365114. Compatibility This replacement door switch fits select Frigidaire, Electrolux, and Kenmore microwave models. Example compatible models include (but are not limited to): Frigidaire FFMV1645TS, Electrolux E30MO75HPS, and Kenmore 790.80353310. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM safety and performance standards ⚡ Restores Safe Operation – Ensures microwave only operates when the door is securely closed 💰 Budget-Friendly Fix – High-quality alternative to expensive OEM replacements 🛠️ Quick Installation – Direct-fit replacement; installs easily with basic tools 🛡️ Fixes Common Issues – Solves no-start, mid-cycle shutdowns, or unsafe door operation 📐 Product Specification Part Number: 5304512529 Component Type: Microwave Door Interlock Switch Material: Heat-resistant plastic housing with copper terminals Mounting: Snap-in bracket installation Operating Conditions: Designed for high-voltage microwave circuits Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver ⚠️ Safety First: Always unplug the microwave before servicing. Microwave capacitors can retain dangerous voltage even when unplugged — use extreme caution or contact a qualified technician. Steps: Disconnect power and remove the microwave cover. Locate the door latch assembly containing the switches. Disconnect wiring connectors and remove the old switch. Install the new XPARTCO 5304512529 door switch into the same slot. Reconnect wiring, reassemble the cover, and test door operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your microwave’s performance and safety — Add to Cart Now for a reliable, budget-friendly replacement!

Read more less

XPARTCO WB24X10190 Microwave Door Switch – Compatible with GE, Hotpoint, and RCA Microwaves Product Description Restore safe and reliable microwave operation with the XPARTCO WB24X10190 Microwave Door Switch. This high-quality replacement detects when the microwave door is closed, allowing power to flow safely to the control board. A faulty door switch can cause the microwave not to start, stop mid-cycle, or run with the door open. Installing this durable replacement ensures proper safety interlock function and restores dependable performance. Replaces Part Numbers WB24X10190, 1810589, AH3486598, PD00054718, EAP3486598, EA3486598, AP4980350, PS3486598. Compatibility This replacement door switch fits select GE, Hotpoint, and RCA microwave models. Example compatible models include (but are not limited to): GE JVM1540LM1CS, GE JVM6175DK1WW, and Hotpoint RVM1535DM1BB. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM safety and performance standards ⚡ Restores Safe Operation – Ensures microwave runs only when the door is properly closed 💰 Affordable Solution – High-quality part at a lower price than OEM versions 🛠️ Quick Installation – Direct-fit replacement installs in minutes with basic tools 🛡️ Fixes Common Issues – Resolves microwaves not starting, stopping mid-cycle, or running with the door open 📐 Product Specification Part Number: WB24X10190 Component Type: Microwave Door Interlock Switch Material: Heat-resistant plastic housing with metal terminals Mounting: Snap-in style for interlock bracket assembly Operating Conditions: Rated for high-voltage microwave circuits Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver ⚠️ Safety First: Unplug the microwave before servicing. Capacitors can retain high voltage even when unplugged — use caution or contact a qualified technician. Steps: Unplug the microwave and remove the outer cover. Locate the door latch assembly and access the switch bracket. Disconnect the wiring harness and release the old switch from the bracket. Install the new XPARTCO WB24X10190 switch in the same orientation. Reconnect wires, reinstall the cover, and test operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your microwave’s safety and performance — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

5304523741 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling efficiently with the 5304523741 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved replacement circulates cold air from the evaporator throughout the refrigerator and freezer compartments. A failing fan motor can cause uneven temperatures, frost buildup, or warm sections in your fridge. Installing this genuine OEM part ensures quiet, dependable air circulation and consistent cooling performance. Replaces Part Numbers 5304523741, AP6983831, EAP12746805, 4960926, PD00067011, PS12746805. Compatibility This genuine OEM fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFSS2615TS0, Electrolux LFHB2751TF, and Kenmore 253.70313214. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved motor for reliable cooling performance ❄️ Efficient Air Circulation – Distributes cold air evenly throughout the compartments 💰 Energy-Efficient Operation – Restores temperature consistency and reduces compressor strain 🛠️ DIY Friendly – Direct-fit replacement installs in minutes 🛡️ Fixes Common Issues – Solves warm freezer, frost buildup, or noisy fan motor problems 📐 Product Specification Part Number: 5304523741 Component Type: Refrigerator Evaporator Fan Motor Material: Metal and high-temperature plastic housing Mounting: Direct-fit replacement in freezer compartment Operating Conditions: Designed for continuous low-temperature operation Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove freezer shelves and back panel. Locate and disconnect the wiring harness from the old fan motor. Remove mounting screws and take out the old motor and fan blade. Transfer the fan blade (if required) to the new 5304523741 motor. Mount the new motor, reconnect wiring, and reinstall back panel. Restore power and confirm even cooling and quiet operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧊 Genuine OEM Replacement Part 🔄 30-Day Return Policy Keep your refrigerator running at peak performance — Add to Cart Now for a genuine, factory-approved repair!

Read more less

279457 Dryer Heating Element Wire Kit - Compatible with Whirlpool, Maytag, Kenmore Product Description Restore your dryer’s heating functionality with the 279457 Dryer Heating Element Wire Kit. This high-quality replacement kit is designed for select Whirlpool, Maytag, Kenmore, Amana, Admiral, and Jenn-Air dryers, repairing damaged or burnt wiring connections to the heating element. It ensures reliable heat delivery at a cost-effective price, addressing issues like no heat or inconsistent heating. Note: Includes one high-temperature wires and one wire connector (female spade connectors, 5/16"). Disconnect power before installation. Verify compatibility with your dryer model. Replaces part numbers: 279457, 279457VP, T2502, AP3134638, PS334206. Compatibility: Compatible with select dryer models, including but not limited to: Whirlpool: WED4800BQ0, WED4800XQ0, WED4850BW0, WED4900XW0, WED5321SQ0 Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, Estate (verify compatibility with heating element 4391960) Common models: Kenmore 110.60072990, Maytag MEDC400VW0 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, and Estate dryers. 🔧 Specifications: kit with one high-temperature wires and one wire nuts, 5/16" female spade connectors. 💪 Reliable Performance: Ensures secure electrical connections for consistent heating element operation. 🛠️ Easy Installation: Requires wire cutters, strippers, and screwdriver; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no heat, inconsistent heating, or burnt wire issues. Product Specification Part Number: Choice 279457 Component Type: Dryer heating element wire kit Material: Heat-resistant metal wires, plastic-insulated connectors Connector Type: 5/16" female spade connectors Operating Conditions: Suitable for high-temperature dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer heating efficiently today! Add to cart now for a reliable fix!

Read more less

XPARTCO DC66-00887A Washer Pulsator Cap – Compatible with Samsung Washers Product Description Replace your worn or missing washer pulsator cap with the XPARTCO DC66-00887A Washer Pulsator Cap. This high-quality aftermarket replacement protects the central bolt of the pulsator (wash plate) from water intrusion and corrosion. A damaged or missing cap can lead to imbalance, leaks, or noise during spin cycles. Installing this part restores proper drum function and extends the washer’s lifespan. Replaces Part Numbers DC66-00887A, PD00038471, EAP11762121, AP6027557, 4814077, PS11762121. Compatibility This replacement pulsator cap fits select Samsung top-load washers. Example compatible models include (but are not limited to):Samsung WA45H7000AW/A2, WA400PJHDWR/AA, WA422PRHDWR/AA Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Compatible with Samsung top-load washers 💧 Protective Design – Prevents water from reaching the pulsator bolt 💰 Budget-Friendly Fix – Quality replacement at a lower cost than OEM 🛠️ Simple Installation – Snaps securely into place in seconds 🛡️ Fixes Common Issues – Resolves missing, cracked, or leaking pulsator caps 📐 Product Specification Part Number: DC66-00887A Component Type: Washer Pulsator (Wash Plate) Cap Material: Durable, water-resistant plastic Mounting: Snap-fit installation, tool-free Operating Conditions: Designed for residential top-load washers Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Always unplug the washer before performing repairs. Steps: Unplug washer and open lid. Remove any debris around the pulsator area. Gently pry off the old cap using a flathead screwdriver if needed. Align and press the new XPARTCO DC66-00887A cap firmly until it clicks. Confirm a tight seal before restarting the washer. ⏱️ Time Required: 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your washer’s performance — Add to Cart Now for a reliable, affordable replacement!

Read more less

W10633627 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air Refrigerators Product Description Keep your refrigerator cooling efficiently with the W10633627 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved fan motor circulates cold air throughout the refrigerator and freezer compartments, maintaining consistent temperatures and preventing frost buildup. A failing fan motor can cause uneven cooling, temperature fluctuations, or unusual noises. Replacing it with this genuine OEM part restores quiet, efficient performance and reliable cooling. Replaces Part Numbers W10633627, 3023615, W10395278, W10673906, W10724602, W10798934, PD00005920, EAP8691851, AP5781863, PS8691851. Compatibility This genuine evaporator fan motor is compatible with select Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air refrigerators. Example compatible models include (but are not limited to): Whirlpool WRS325SDHZ01, Maytag MFF2558FEZ04, and KitchenAid KRFF507HPS00. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved evaporator fan motor for Whirlpool-brand refrigerators ❄️ Improves Air Circulation – Ensures consistent cooling across all compartments 💰 Long-Lasting Performance – OEM-tested for quality and reliability 🛠️ Easy Installation – Installs in under 30 minutes with basic tools 🛡️ Fixes Common Issues – Resolves poor cooling, noisy operation, or frost buildup 📐 Product Specification Part Number: W10633627 Component Type: Refrigerator Evaporator Fan Motor Material: Durable plastic housing with precision-balanced motor Mounting: Direct-fit replacement for rear freezer panel Operating Conditions: Designed for refrigerator and freezer use Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before beginning repairs to avoid electrical shock. Steps: Unplug refrigerator and remove freezer shelves. Take off the rear panel inside the freezer compartment. Disconnect wiring harness from the old fan motor. Remove mounting screws and replace with the new W10633627 fan motor. Reconnect wiring, reinstall the rear panel, and restore power. Confirm that the fan runs quietly and air circulation is restored. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a genuine, factory-approved repair! 

Read more less