(4 Pack) W10195416 Dishwasher Lower Rack Wheel – Compatible with Whirlpool, KitchenAid, Kenmore, and Maytag Dishwashers Product Description Restore smooth rack movement with the XPARTCO W10195416 Dishwasher Lower Rack Wheel. This high-quality aftermarket replacement attaches to the lower dishrack, allowing it to glide easily in and out during loading and unloading. A broken or missing wheel can make the rack difficult to slide, causing strain on the track or door. Installing this durable replacement restores effortless operation and long-term reliability. Replaces Part Numbers W10195416V, W10195416, W10195416VP, EAP11722152, PD00024134, AP5983730, PS11722152. Compatibility This replacement rack wheel is compatible with select Whirlpool, KitchenAid, Kenmore, and Maytag dishwashers. Example compatible models include (but are not limited to): Whirlpool WDT710PAYM3, KitchenAid KUDS30IXBL8, and Kenmore 665.13293K114. Always verify your dishwasher’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Compatible with major Whirlpool-brand dishwashers 🧩 Smooth Operation – Allows the lower rack to roll effortlessly on the track 💰 Cost-Effective Fix – Affordable alternative to OEM replacement 🛠️ Easy Installation – No tools required; snaps securely in place 🛡️ Fixes Common Issues – Replaces broken, cracked, or missing rack wheels 📐 Product Specification Part Number: W10195416 (4 Pack) Component Type: Dishwasher Lower Rack Wheel Material: High-strength plastic Mounting: Snap-fit installation on lower rack Operating Conditions: Designed for high-temperature dishwasher environments Compliance: Built to OEM-equivalent standards (not OEM) 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Disconnect power before performing any maintenance. Steps: Remove the lower rack from the dishwasher. Locate the broken or missing wheel. Align new XPARTCO W10195416 wheel with rack peg. Push firmly until it clicks securely into place. Reinstall lower rack and test for smooth movement. ⏱️ Time Required: 2–3 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Get your dishwasher rack rolling smoothly again — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

EXP15A Ceramic Microwave Fuse Fast Blow 15A, 250V Replaces Part Numbers: WB27X7, 14QBP15CFB, AP2626454, PS240270, M0805102, AP6014670, WPM0805102, 3601-001197, PS4131368, AP4046099, PS239596, AP3189379, WB08T10027, WB2X8151, WB27X10454. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

316011200 Gas Stove Range Top Burner Spark Igniter Product Title 316011200 Gas Stove Range Top Burner Spark Igniter - Compatible with Frigidaire, Tappan, Kenmore Ranges Product Description Ensure reliable burner ignition with the 316011200 Gas Stove Range Top Burner Spark Igniter from Parts-O-Matic. This high-quality aftermarket igniter replaces the original 316011200, providing the spark needed to ignite surface burners on select Frigidaire, Tappan, Kenmore, and other Electrolux-brand gas ranges. Featuring a ceramic insulator and 1/8" male terminal, it’s ideal for fixing burners that fail to light, spark downward, or require extended ignition time. Enjoy free shipping on all orders at Parts-O-Matic. Key Features: ✅ Broad Compatibility: Fits select Frigidaire, Tappan, Kenmore, Gibson, and Westinghouse gas range models (see compatibility chart below). 🔥 Reliable Ignition: Delivers consistent sparking to ignite gas burners efficiently. 💰 Cost-Effective Alternative: Aftermarket part offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Secures with one Phillips screw; requires lifting the range top and disconnecting the wire (10–20 minutes). 🛡️ Fixes Common Issues: Resolves burners not lighting, sparking downward, gas smell, or failure to stay lit. Compatibility: Compatible with models including but not limited to: Frigidaire: FGF337GUC, FGF366ECB, GLGF366ASA, 2343-87A, 283440A, 283447B Tappan: 30-2272-00-01, 30-2272-23-02, 30-3053-00-03, 30-3152-23-01 Kenmore: 790.75603210, 790.75609214 Replaces part numbers: 316011200, 5303311262, AH436633, EA436633, AP2123862, PS436633, LP11343. Verify your model number in the compatibility chart below or contact Parts-O-Matic support for assistance. Installation Notes: Tools Needed: Phillips screwdriver, small flathead screwdriver, 1x4 wood piece (to prop range top). Safety First: Unplug the range and shut off the gas supply before installation. Steps: Lift the range top using a putty knife to release spring clips, prop it with a 1x4 wood piece, remove the burner’s Phillips screw, disconnect the wire from the old igniter, and install the new igniter. Check wires for grounding issues and use heat-resistant tape if needed. Test burners after reassembly. Download our installation guide or watch our YouTube tutorial for step-by-step instructions. Shop Parts-O-Matic for high-quality aftermarket appliance parts with free shipping on all orders—no minimum required and a 30-day return policy. Get your gas range burners lighting perfectly today! Add to cart now for an affordable fix with free shipping on your entire order!

Read more less

XPARTCO W11130359 Washer Suspension Rod Kit – Compatible with Whirlpool, Maytag, Amana, Crosley, and Roper Washers Product Description Reduce vibration and restore smooth, stable operation with the XPARTCO W11130359 Washer Suspension Rod Kit. This high-quality aftermarket replacement supports the washer tub and absorbs movement during wash and spin cycles. Worn or broken suspension rods can cause loud banging noises, excessive shaking, or unbalanced loads. Replacing them with this reliable XPARTCO kit ensures balanced performance and extends the life of your washer. Replaces Part Numbers W11130359, W11027215, 4813873, W10594082, W10785954, W10821704, W10901060, W11033536, W11226784, AP6261901, PD00042502, EAP12347544, PS12347544. Compatibility This replacement suspension rod kit fits select Whirlpool, Maytag, Amana, Crosley, and Roper top-load washers. Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC565FW0, and Amana NTW4516FW3. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Built to match OEM performance and stability 🌀 Reduces Vibration – Keeps washer tub balanced during spin cycles 💰 Cost-Effective Solution – High-quality kit at a lower cost than OEM parts 🛠️ Complete Kit – Includes four suspension rods, bushings, and suspension springs 🛡️ Fixes Common Issues – Solves excessive shaking, banging, or unbalanced load problems 📐 Product Specification Part Number: W11130359 Component Type: Washer Suspension Rod Kit Includes: 4 suspension rods with springs and mounting bushings Material: Heavy-duty steel with corrosion-resistant coating Mounting: Direct-fit installation under washer tub Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, pliers, socket wrench ⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock or injury. Steps: Disconnect power and remove the washer lid or top panel. Support the washer tub with a sturdy object or strap. Remove the old suspension rods from their mounting holes. Install the new XPARTCO W11130359 rods one by one, attaching springs and bushings. Reassemble panels, plug in the washer, and run a test cycle to confirm smooth operation. ⏱️ Time Required: 30–40 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Eliminate noise and vibration — Add to Cart Now for a stable, long-lasting repair!

Read more less