Cooking Appliances Parts

XPARTCO W10915651 Microwave Waveguide Cover The XPARTCO W10915651 is an aftermarket replacement microwave waveguide cover compatible with select Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, Roper, Admiral, Magic Chef, Norge, Estate, and Ikea over-the-range and built-in microwave/oven combo models. The waveguide cover is a flat mica plate mounted on the interior right wall of the microwave cavity. It protects the waveguide — the channel through which microwave energy is directed into the cooking cavity — from food splatter, grease, and moisture. Without the cover, food particles can reach the waveguide and cause arcing, sparking, burning, and permanent damage to the magnetron or waveguide assembly. Made from mica (a heat-resistant mineral material), this cover measures approximately 5-3/8" L x 1-3/4" W and clips or slides into the mounting slot on the interior wall of the microwave. It directly replaces W10687366, W10120230, WPW10120230, and 461967451001. Replacing a damaged or burned waveguide cover promptly is the single most important step in preventing more expensive microwave damage. Installs in under 5 minutes with no tools. Quick Answer The XPARTCO W10915651 Microwave Waveguide Cover fixes microwaves that are sparking, arcing, burning smells, or have a scorched or missing cover on the interior right wall. Mica plate, approx. 5-3/8" L x 1-3/4" W. — installs in under 5 minutes. Compatible with Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, and more. Replaces W10687366, W10120230, WPW10120230, and 461967451001. Common Problems This Part Fixes Sparking or arcing inside the microwave during operation Burning smell coming from the microwave while in use Visible scorch marks, burn spots, or a hole in the existing waveguide cover Microwave stopping mid-cycle due to arcing or sparking Waveguide cover is cracked, warped, or missing entirely Uneven heating or microwave not heating food properly Microwave making popping or crackling sounds during operation Replaces Part Numbers This waveguide cover directly replaces the following OEM and cross-reference part numbers: W10915651, W10120230, WPW10120230, W10687366, 461967451001, AWP42398, PD00039892, EAP11769950, AP6038160, PS11769950.  If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This waveguide cover is compatible with select over-the-range and built-in microwave/oven combo models from the following brands: Whirlpool microwaves and microwave/oven combos (WOC, WOCA, WOEC series and more) KitchenAid microwaves and built-in combos Jenn-Air microwaves and built-in combos Maytag microwaves Amana microwaves Kenmore / Sears microwaves (Whirlpool-built models) Roper microwaves Admiral microwaves Magic Chef microwaves Norge microwaves Estate microwaves Ikea microwaves (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Protects the waveguide from food splatter and moisture — prevents arcing, sparking, and magnetron damage Made from mica — a heat-resistant mineral material rated for continuous high-temperature microwave exposure Dimensions: approximately 5-3/8" L x 1-3/4" W — fits the mounting slot on the interior right wall of compatible models Clips or slides into the existing mounting slot — no tools required, installs in under 5 minutes Replaces W10687366, W10120230, WPW10120230, and 461967451001 Compatible with Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, and more Replacing a burned or damaged cover immediately prevents far more expensive repairs to the magnetron or waveguide assembly Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number W10915651 Part Type Microwave Waveguide Cover (Mica Plate) Condition Aftermarket Replacement Material Mica (heat-resistant mineral) Dimensions Approximately 5-3/8" L x 1-3/4" W Location Interior right wall of the microwave cavity Installation Clips or slides into mounting slot — no tools required Compatible Brands Whirlpool, KitchenAid, Jenn-Air, Maytag, Amana, Kenmore, Roper, Admiral, Magic Chef, Norge, Estate, Ikea Installation Notes ⚠️ Unplug Microwave Before Starting Unplug the microwave before beginning. Open the microwave door and locate the waveguide cover on the interior right wall of the cavity — it is a flat rectangular plate, typically tan or off-white in color. If the old cover is burned, it may be stuck to the wall or disintegrating — carefully remove any remaining pieces and wipe the mounting area clean. Slide or clip the new W10915651 cover into the mounting slot on the right wall of the cavity — it should seat flat against the wall with no gaps. Ensure the cover is fully seated before use. Do not operate the microwave with a missing, cracked, or burned waveguide cover — even a small burn hole can cause arcing and progressive damage. Restore power and run a brief test cycle to confirm normal operation. Tools needed: None. A damp cloth may be needed to clean the mounting area. Frequently Asked Questions What does the waveguide cover do and why does it need to be replaced? The waveguide cover is a thin mica plate that covers the opening of the waveguide — the channel through which microwave energy travels from the magnetron into the cooking cavity. Its job is to prevent food particles, grease, and steam from entering and contaminating the waveguide. When food splatter builds up on the cover and burns, the cover develops scorch marks or burn-through holes. These damaged spots absorb microwave energy and cause arcing — sparks and electrical discharges that can quickly damage the magnetron, which is the most expensive component in the microwave. Replacing the waveguide cover promptly when it shows damage is the least expensive and most important preventive maintenance you can do for a microwave. Can I use the microwave without the waveguide cover? No — never operate a microwave with a missing, cracked, or burned waveguide cover. Without the cover, food particles and moisture can enter the waveguide directly, causing immediate arcing and sparking. Even a small hole in the cover can cause arcing. Operating the microwave in this condition risks damaging the magnetron (a $100–$200 or more repair), burning the waveguide channel, or creating a fire hazard. The waveguide cover is inexpensive and installs in minutes — always replace it before using the microwave again. My microwave is sparking — will replacing the waveguide cover fix it? Sparking is almost always caused by a burned or damaged waveguide cover, and replacing the cover resolves the sparking in the vast majority of cases. However, if the waveguide itself (the metal channel behind the cover) has been damaged from prolonged arcing, or if metal debris from a burned cover has entered the waveguide, additional cleaning or component repair may be needed. Inspect the area behind the old cover after removing it — if the wall or channel shows deep burn damage, contact our support team or a technician before operating the microwave again. How do I prevent the waveguide cover from burning again? The most effective prevention is to keep the interior of the microwave clean — specifically the waveguide cover itself and the walls near it. Wipe down the cover and interior walls with a damp cloth after each use, especially after heating anything that splashes or spatters. Use a microwave-safe cover or lid over food when heating. Never operate the microwave when empty, as this directs all microwave energy at the waveguide cover without any food to absorb it. With regular cleaning, a mica waveguide cover can last for years without needing replacement. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from heat-resistant mica to match the dimensions and fit of the original W10915651 waveguide cover. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

W10196405RW Large 8" Steel Drip Bowl Pan Chrome drip bowl (also called a drip pan) for 8 inch burner on an electric range. The drip pan sits underneath the heating element to collect drips or spills around the burner. Replaces Part Numbers: W10196405RW, 14211594, 1481881, 1534548, 229769, 241343, 244404, 281349, 292975, 3-4969, 304969, 304988, 308540, 3148358, 3150247RW, 3195209, 4157960, 4164314, 4164382, 4165276, 4165496, 4165521, 4165614, 4315244, 4320860, 4322801, 4329225, 4351459, 4351555, 4352112, 4352113, 4352553, 4352702, 4353315, 4353808, 4354299, 4355084, 4355479, 4396093, 52516, 786182, 83148358, 83150247, 832526, 832635, 834621, 834754, 877546, AH2366563, EA2366563, K15018, AP4452175, PS2366563.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

74009592CM Burner Control Knob Black plastic burner knob Fits Specific Maytag, Jenn Air, Whirlpool ranges Replaces Part Numbers: WP74009592, 74009592, 1032643, 71003477, AP6011140, PS11744334. Description: This Top Burner Control Knob is a replacement part for specific Whirlpool ranges and cooktop models. This part allows for precise control over the heat level of the stove's burners, enabling users to adjust the flame size for various cooking needs. Constructed from durable materials, the knob is designed to withstand the rigors of daily use, providing a reliable interface for setting and maintaining the desired cooking temperature. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

ERP WB30T10126 Radiant Surface Element Triple Haliant Element Replaces Part Numbers: WB30T10126, AH2321560, EA2321560, AP4344521, PS2321560.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO DG94-00520A Oven Igniter The XPARTCO DG94-00520A is an aftermarket replacement oven burner igniter compatible with select Samsung gas ranges and ovens. The igniter is a hot surface igniter that draws electrical current through the oven safety valve to open it, then heats to ignition temperature to light the gas burner. When the igniter weakens or fails, the oven will not heat, will take too long to preheat, or will emit a gas smell without lighting. This complete assembly includes the igniter with bracket and lead/plug. It features 8-inch leads with female pins, draws 3.4–3.6 amps, and can be used as either a bake or broil igniter depending on the model. The bracket measures 3-3/4" L x 1-3/4" W x 13/16" H and the harness and plug extend 7-7/8" from the igniter body. Verify that the electrical plug matches your existing igniter before ordering. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO DG94-00520A Oven Igniter fixes Samsung gas ovens that won't heat, take too long to preheat, or have an igniter that glows but never lights the burner. Draws 3.4–3.6A. Includes bracket and lead/plug with 8" leads. Can be used as bake or broil igniter depending on model. Always verify plug type matches before ordering. Common Problems This Part Fixes Oven not heating at all — gas is not igniting Oven takes excessively long to preheat (weak igniter not reaching ignition temperature) Igniter glows orange or red but never lights the gas burner Smell of gas when oven is turned on but burner does not light Oven heats inconsistently or shuts off mid-cycle Broiler not lighting on applicable models Clicking sounds from the oven without ignition Replaces Part Numbers This oven igniter directly replaces the following OEM and cross-reference part numbers: DG94-00520A, 2692271, EAP4241428, ASM38124, PD00027453, AP5577941, PS4241428. Always verify the electrical plug type matches your existing igniter before ordering. Contact our support team if you're unsure. Compatibility This igniter is compatible with select gas ranges and ovens from the following brands: Samsung gas ranges (freestanding and slide-in) Important: Some Samsung models use two igniters — one for bake and one for broil. This part can serve as either depending on your model. Verify which igniter position you are replacing and confirm the plug type matches before ordering. Key Features Hot surface igniter — draws current through the oven safety valve to open it, then ignites the gas burner Draws 3.4–3.6 amps — correct amperage range to open the Samsung gas valve and reach ignition temperature Can be used as bake or broil igniter depending on the model Complete assembly — includes igniter, bracket, and lead/plug with 8" leads and female pins Bracket dimensions: 3-3/4" L x 1-3/4" W x 13/16" H; block measures 1-1/2" L Harness and plug extend 7-7/8" from the igniter body Metal, ceramic, and plastic construction — built to withstand high oven temperatures Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number DG94-00520A Part Type Oven Burner Igniter (Hot Surface Igniter) Condition Aftermarket Replacement Application Gas Ranges and Ovens (Bake or Broil) Amperage Draw 3.4 – 3.6 Amps Bracket Dimensions 3-3/4" L x 1-3/4" W x 13/16" H Block Length 1-1/2 inches Lead Length 8 inches (female pins) Harness / Plug Reach 7-7/8 inches from igniter body Material Metal / Ceramic / Plastic Includes Igniter, bracket, and lead/plug assembly Compatible Brands Samsung Installation Notes ⚠️ Shut Off Gas and Unplug Before Starting Shut off the gas supply at the shutoff valve and unplug the range from the power outlet before beginning any repair. Open the oven door and remove the oven racks. Remove the oven bottom panel by unscrewing the retaining screws, then lift and remove the heat shield beneath it to expose the burner assembly. Unscrew the igniter from the burner bracket — typically one or two screws. Carefully disconnect the wiring harness connector. Connect the new DG94-00520A igniter to the wiring harness, secure it to the burner bracket with the screws, then reinstall the heat shield and bottom panel. Restore gas supply and power, then run a test cycle to verify the oven lights properly. Note: Do not touch the ceramic igniter element with bare hands — oils from skin can reduce its lifespan. Tools needed: Phillips screwdriver, nut driver, work gloves. Frequently Asked Questions How do I know if my oven igniter is bad? The most common signs are the oven not heating at all, taking much longer than usual to preheat, or the igniter glowing orange or red but never lighting the burner. A healthy igniter glows bright orange and ignites the gas within 30–90 seconds. If it glows dimly or stays on without lighting the burner, it is drawing insufficient current to open the gas safety valve and needs to be replaced. Why does my oven igniter glow but the oven still doesn't heat? A glowing igniter that never lights the burner is the classic sign of a weak igniter. The igniter must draw enough current — typically 3.2 amps or more — to open the gas safety valve. As igniters age, their resistance increases and amperage draw drops below the threshold needed to open the valve. The igniter glows because it still has some current, but not enough to let gas through. Does my Samsung oven use one igniter or two? Many Samsung gas ranges have two igniters — one for the bake burner (bottom of oven) and one for the broil burner (top of oven). The DG94-00520A can serve as either depending on the model. Check which position is failing before ordering, and verify that the plug type on this igniter matches your existing part. Do I need to verify the plug type before ordering? Yes — this is important. Some Samsung models use a plug that is a direct match for this igniter, while others may require cutting the old plug and using wire nuts or crimp connectors. Inspect the connector on your existing igniter and compare it to the 8" female pin connector included with this part before ordering. Contact our support team if you need help confirming compatibility. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured from metal, ceramic, and plastic to match the dimensions and electrical specifications of the original DG94-00520A igniter. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

MWCDF-095-2Kit Microwave Capacitor, Diode & Fuse Kit – Universal High-Voltage Repair Kit Product Description Restore proper microwave heating and electrical safety with the MWCDF-095-Kit Microwave Capacitor, Diode & Fuse Kit. This high-quality aftermarket repair kit includes the three most common high-voltage components required to fix no-heat and power-related microwave issues: a high-voltage capacitor, high-voltage diode, and high-voltage fuse. Failed components in the HV circuit can cause the microwave to run without heating, blow fuses, or shut down completely. Replacing the full kit helps ensure reliable heating and safe operation. This Kit Includes Following Parts: 1 Capacitor 2 universal Diode (EXPHV10)  2 Ceramic Fuse (20 amp) 6.35 x 32 mm 2 5Kv Fuse (0.9A) 6x40mm Replaces Part Numbers Capacitor Replaces Part Numbers: TJ13QBP21095, 13QBP0300, 13QBP21095, AP5633423, RC-QZA234WRE0, RC-QZB011MRE0, RCQZA331WRZZ, 5304513458, PD00065299, EAP12365444, 4584979, AP6301645, PS12365444, 00631397, 631397, PD00044249, EAP10057840, 4161979, AP5950362, PS10057840, WB27X11031, PD00040188, EAP2339855, 1474116, AP4362390, PS2339855, WB27X10073, PD00045875, EAP239187, 769853, AP2025984, PS239187, WB27X11011, PD00087136, EAP2345628, 1474103, AP4368101, PS2345628, 2501-001016, 2028385, AP4033712, PS4130923, 8206562, PD00074258, EAP1486840, 1200936, AP3890709, PS1486840, 5304528930, 5304464253, AP7017693, PS2203382, WB27X10009, 254534, AH239117, EA239117, AP2025928, PS239117, WP815073, AP6011690, PS11744888, 2501-000260, AP4033659, PS4130923 and more Compatibility This universal microwave high-voltage repair kit is compatible with many GE, Whirlpool, Samsung, LG, Frigidaire, Panasonic, Sharp, and Kenmore microwave ovens that use a 0.95 µF high-voltage capacitor, standard microwave HV diode, and HV fuse. Commonly used in countertop, over-the-range, and built-in microwave models. Always verify capacitor rating and fuse specifications before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement Kit – Built to OEM-equivalent electrical specifications ⚡ Complete HV Circuit Repair – Includes capacitor, diode, and fuse 🔥 Fixes No-Heat Issues – Restores proper magnetron power delivery 🛡️ Improves Electrical Safety – Protects microwave from overload and failure 💰 Cost-Effective Solution – Avoids expensive magnetron replacement 📐 Product Specification Kit Name: MWC-095-Kit Component Type: Microwave High-Voltage Repair Kit Capacitor Rating: 2100 VAC, 0.95 µF Diode Type: Microwave high-voltage diode Fuse Type: Microwave high-voltage fuse Application: Magnetron high-voltage power circuit Quality Level: Aftermarket replacement (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, insulated pliers ⚠️ Safety First:Microwaves contain EXTREMELY HIGH VOLTAGE, even when unplugged. Always discharge the high-voltage capacitor before servicing. Professional installation is strongly recommended. Basic Steps: Unplug the microwave and remove the outer cabinet. Safely discharge the existing high-voltage capacitor. Remove the old capacitor, diode, and fuse. Install the new components from the MWCDF-095-Kit. Reassemble the cabinet and restore power. Test microwave heating operation. ⏱️ Time Required: 25–35 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Aftermarket Appliance Parts 🔄 30-Day Return Policy Restore microwave heating safely and efficiently — Add to Cart Now for a complete, budget-friendly repair solution!

Read more less

3149400CM Surface Element Switch 240V, 8.9-11.0 amp, Replacement for Infinite Switch for 8" Surface Element  replacement for Whirlpool. Replaces Part Numbers:WP3149400, 3149400, 2786, 310180, 311846, 311858, 311859, 314140, 3148954, 99989662, AP6007666, PS11740783, W10295573, WP3149400VP. Description: This Surface Element Switch is a replacement part for specific Whirlpool ranges and oven models. This component serves as the control mechanism for the 8-inch surface heating element, allowing you to precisely regulate the temperature or turn the burner on and off.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less