Washer Door Boot, Gaskets, Seals & Hinges

DC62-00223A Washer Center Tub Seal – Replacement for Samsung Washers Product Overview The Center Tub Seal is a replacement part compatible with Samsung washers. This seal is located on the center tub assembly and provides a watertight barrier between the inner and outer tubs. It prevents water from leaking out during the wash cycle. Fits Specific Samsung Washer Models. Replaces Part Numbers This seal replaces DC62-00223A, AP4211943, PS4208713. Designed to match the original dimensions and performance of the factory part. Compatible Brands Compatible with Samsung front-load washer models, Fits various models that require a shaft-to-tub seal of this type. Fixes the Following Issues Water leaking from under the washer Noisy spin cycle due to worn seal Mold or mildew forming near tub bearing Internal water damage from leaking shaft area Why Buy from Parts‑O‑Matic Reliable aftermarket quality Fast and free U.S. shipping Helps extend washer lifespan and prevent damage Trusted by repair professionals and homeowners

Read more less

XPARTCO WH16X29509 Washer Damper Vent The XPARTCO WH16X29509 is an aftermarket replacement washer damper vent compatible with select GE, Hotpoint, RCA, and Kenmore front-load washers in the GFW510, GFW550, and GFW650 series. The damper vent is a one-way flap valve located on the drain system that automatically opens during draining to equalize pressure inside the drain pipe, allowing water to drain quickly and completely. When closed, it seals the drain path to prevent backflow of residual dirty water and lint from re-entering the drum and soiling clean laundry. Made from high-strength plastic with a reinforced hinge mechanism, this damper vent is designed to resist deformation under high-frequency operation and to prevent lint accumulation that can cause blockages. It directly replaces OEM part numbers WH16X29509, 4982970, AP6990392, and several additional cross-reference numbers. Snap-in installation requires no special tools and takes just minutes to complete. Quick Answer The XPARTCO WH16X29509 Washer Damper Vent fixes GE front-load washers displaying error codes 38, 39, 40, or 84, draining slowly, or returning dirty water or lint to clean clothes. The damper opens during draining and closes to block backflow. Compatible with GE GFW510, GFW550, and GFW650 series. Snap-in installation — no tools required. Common Problems This Part Fixes Slow or incomplete draining during the wash or spin cycle Dirty water or lint backflowing into the drum and soiling clean laundry Washer not draining fully, leaving standing water in the drum Drain hose blockages caused by a stuck or failed damper vent flap Moisture or odor buildup inside the washer due to poor drain ventilation Replaces Part Numbers This washer damper vent directly replaces the following OEM and cross-reference part numbers: WH16X29509, EAP16219913, FIX16219913, AGE26992, PD00079480, AP6990392, PS16219913. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This damper vent is compatible with select front-load washers from the following brands and series: GE front-load washers — GFW510 series GE front-load washers — GFW550 series GE front-load washers — GFW650 series GE front-load washers — GFW850 series (select models) GE Profile front-load washers — PFW series (select models) Hotpoint front-load washers (select models) RCA front-load washers (select models) Kenmore / Sears front-load washers (select GE-built models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features One-way flap valve — opens automatically during draining to equalize pipe pressure and ensure fast, complete drainage Seals shut when not draining — blocks residual dirty water and lint from backflowing into the drum and re-soiling clean laundry High-strength plastic construction with reinforced hinge — resists deformation under high-frequency operation Optimized airflow design minimizes lint accumulation for long-lasting, clog-free performance Heat-resistant materials — withstands high-temperature wash programs Direct replacement for WH16X29509 — snap-in installation, no special tools required Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number WH16X29509 Part Type Washer Damper Vent (Drain Vent Flap Valve) Condition Aftermarket Replacement Application Front-Load Washers Function Equalizes drain pipe pressure during draining; blocks backflow when closed Material High-strength plastic Installation Snap-in — no special tools required Error Codes Resolved 38, 39, 40, 84 (on compatible GE models) Compatible Series GFW510, GFW550, GFW650, GFW850, PFW (select models) Compatible Brands GE, Hotpoint, RCA, Kenmore Installation Notes ⚠️ Unplug Washer Before Starting Unplug the washer from the power outlet before beginning any repair. The damper vent is located in the drain system — typically accessible from the front lower panel or by removing the washer's access panel. Locate the existing damper vent on the drain hose or drain port. Press the tabs or release clips to remove the old damper vent from its snap-in mounting position. Align the new WH16X29509 damper vent with the mounting port and press firmly until it snaps into place. Restore power and run a short drain or rinse cycle to verify the washer drains correctly and no error codes are displayed. Tools needed: None for the damper vent itself; a screwdriver may be needed to remove the access panel on some models. Frequently Asked Questions What does the washer damper vent do? The damper vent is a one-way valve on the washer's drain system. During the drain cycle, it opens automatically to equalize the air pressure inside the drain hose, which allows water to drain quickly and completely. When draining stops, the flap closes to create a seal that prevents residual wastewater and lint from flowing back up the drain hose and into the drum — which would re-soil clothes that have already been washed. What error codes does a failed damper vent cause on GE washers? A blocked, stuck, or failed WH16X29509 damper vent is a known cause of error codes 38, 39, 40, and 84 on compatible GE GFW510, GFW550, and GFW650 series front-load washers. These codes are typically triggered when the control board detects a drain pressure or flow issue. Replacing the damper vent resolves the issue in many cases when the drain pump and hose are otherwise clear. How do I know if my damper vent has failed? Common signs of a failed damper vent include slow or incomplete draining, one of the error codes listed above, dirty water or lint reappearing on clothes after a wash cycle, or a stuck flap that is visibly open or closed when it should not be. You can inspect the damper vent by removing the access panel and checking whether the flap moves freely — it should open easily when you apply gentle pressure and spring closed when released. Is the WH16X29509 compatible with GE Profile and GE Café washers? The WH16X29509 is confirmed compatible with select GFW and PFW series models from GE and GE Profile. GE Café washers use different model series — verify your specific model number before ordering. Contact our support team if you need help confirming compatibility for your Café or Profile model. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from high-strength plastic to match the dimensions and performance of the original WH16X29509 damper vent. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

WH01X10279 Washer Door Boot Outside Clamp Replaces Part Numbers: WH01X10279, 1168582, AH1016305, EA1016305, AGE25430, AP3883931, PS1016305.    

Read more less

XPARTCO DC66-00777A Washer Pulsator Cap – Compatible with Samsung Washers Product Description Keep your washer operating smoothly with the XPARTCO DC66-00777A Washer Pulsator Cap. This high-quality aftermarket replacement covers the central pulsator bolt, preventing water, detergent, and debris from entering the washer hub. A cracked or missing cap can lead to corrosion, noise, or imbalance during spin cycles. Replacing it with this durable XPARTCO cap restores a secure seal and helps maintain optimal washing performance. Replaces Part Numbers DC66-00777A, PD00025125, EAP8753312, AP5788799, 3282678, PS8753312. Compatibility This replacement pulsator cap fits select Samsung top-load washers. Example compatible models include (but are not limited to): Samsung WA400PJHDWR/AA, WA422PRHDWR/AA, and WA45H7000AW/A2. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM fit and performance for Samsung washers 💧 Protective Seal – Keeps water and detergent away from the pulsator bolt area 💰 Cost-Effective Solution – Durable and affordable alternative to OEM caps 🛠️ Simple Installation – No tools required; snaps directly into place 🛡️ Fixes Common Issues – Replaces missing or damaged caps to prevent rust and noise 📐 Product Specification Part Number: DC66-00777A Component Type: Washer Pulsator (Washplate) Cap Material: High-strength molded plastic Color: Gray or silver finish (varies by batch) Mounting: Snap-fit installation on top of pulsator bolt Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: None ⚠️ Safety First: Always unplug the washer before performing any maintenance to avoid electrical shock. Steps: Open the washer lid and locate the center of the pulsator (washplate). Remove any remaining parts of the old or damaged cap. Align the new XPARTCO DC66-00777A cap with the pulsator hub opening. Press firmly until it clicks into place. Verify the cap is secure before running a wash cycle. ⏱️ Time Required: Less than 5 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your washer from wear and debris — Add to Cart Now for a quick, reliable fix!

Read more less

285727 Washer Agitator Assembly  Fits Specific Top Load Washer Models. Replaces Part Number: 285727, 285559, 295559, 3347674, 3361598, 470865, AH334617, EA334617, AP3094515, PS334617. Description: The Agitator is a Genuine OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles.

Read more less

WP389386 Washer Lower Agitator  Fits Specific Top Load Washer Models. Replaces Part Number: WP389386, 389386, 2418, 99989683, AP6008839, PS11741980. Description: The Lower Agitator is an OEM part designed for select Kenmore, Whirlpool top-loading washing machines. It sits at the bottom of the wash tub and plays a key agitation role during cycles. This is the bottom part of the agitator assembly.

Read more less

WH08X10049 Washer Genuine OEM Door Boot Seal Washer Front Door Boot Gasket Fits specific GE Front Load Washer models. Replaces Part Numbers: WH08X10049, 1796738, AH3417678, EA3417678, AP4588624, PS3417678. Description: This Gasket is an OEM part for specific GE washing machine models. This gasket forms a seal between the washer door and the drum, preventing water from leaking during the wash cycle. It is crucial for maintaining the efficiency and cleanliness of the washing process by ensuring a tight seal.  You should replace this gasket if it becomes damaged or worn out. Causes of a bad gasket include wear and tear from regular use, exposure to harsh detergents or cleaning chemicals, mold or mildew buildup, or physical damage such as cuts or tears. Keeping the gasket in good condition is essential for preventing leaks and ensuring optimal washer performance.     California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

DC97-14421A Genuine OEM Washer Tub Support Description: The Spider Arm Assembly is an OEM component compatible with specific Samsung front-loading washing machines. It is the linkage mechanism connecting the transmission shaft and pulley system inside the drive motor. With integrated spring coils and joints, the multi-armed assembly facilitates smooth rotational movement of the wash basket essential for various cycles such as agitation, spinning, and drainage. Replaces Part Numbers:  DC97-14421A, 2076567, AP4452794, PS4220154.  

Read more less

XPARTCO MDS47123601 Washer Door Boot Gasket Seal The XPARTCO MDS47123601 is an aftermarket replacement front-load washer door boot seal (also called a door gasket or door diaphragm) compatible with select LG and Kenmore front-load washers in the WM2801, WM2901, and WM3001 series. The door boot gasket is the flexible rubber bellows seal that stretches between the door opening on the washer cabinet and the drum opening. It creates a watertight seal every time the door is closed and also acts as a flexible connector that accommodates drum movement during the spin cycle. When the gasket tears, cracks, develops holes, or accumulates mold that cannot be cleaned away, water leaks from the door area and the washer must be repaired before it can be used safely. Made from durable EPDM rubber, this door boot gasket is a direct replacement for OEM part MDS47123601 and cross-references AP4998888, AH3535209, EA3535209, PS3535209, and 1464249. Compatible LG models include WM2801HLA, WM2801HRA, WM2801HWA, WM2901HVA, WM3001HPA, WM3001HRA, and WM3001HWA, as well as Kenmore 796-series models built on the LG platform. Installs in 30–60 minutes with basic hand tools. Quick Answer The XPARTCO MDS47123601 Washer Door Boot Gasket fixes LG and Kenmore front-load washers that are leaking water from the door area, have a visibly torn or cracked door seal, or have persistent mold that cannot be cleaned. EPDM rubber. Compatible with LG WM2801, WM2901, WM3001 series and Kenmore 796-series. Replaces AP4998888, AH3535209, PS3535209, and 1464249. Installs in 30–60 minutes. Common Problems This Part Fixes Water leaking from the front of the washer, around the door opening Puddles of water on the floor in front of the washer during or after a cycle Visible tear, crack, puncture, or hole in the door boot seal Persistent mold or mildew inside the folds of the gasket that cannot be cleaned away Gasket pulling away from the drum opening or door frame Musty or mildew odor coming from the washer that persists despite cleaning Small items (coins, socks) getting stuck in a damaged or separated gasket Replaces Part Numbers This door boot gasket directly replaces the following OEM and cross-reference part numbers: MDS47123601, AH3535209, ALG55741, AP4998888, EA3535209, EAP3535209, PD00041241, PS3535209. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Note: the MDS47123602 is a different gasket for a different series of LG models — verify your model number before ordering. Compatibility This door boot gasket is compatible with select front-load washers from the following brands and models: LG WM2801HLA, WM2801HRA, WM2801HWA LG WM2901HVA LG WM3001HPA, WM3001HRA, WM3001HWA LG F1314FDS, F1314FDS1, F1314FDS2 LG F1354FDS, F1354FDS1, F1354FDS3 LG F1355FDS5 Kenmore 796.41022900, 796.41028900, 796.41029900, 796.42192900, 796.42198900, 796.42199900 Important: LG uses several different door boot gaskets across its front-load washer lineup — the MDS47123601 is specific to the WM2801, WM2901, and WM3001 series. Other LG models use MDS47123602, MDS47123604, MDS47123608, or other variants. Always verify your exact model number before ordering. Key Features Creates a watertight seal between the washer door and drum opening on every wash cycle Flexible EPDM rubber bellows design accommodates drum movement during high-speed spin cycles Durable EPDM rubber — resistant to detergent, hot water, and the repeated flexing of normal wash use Direct replacement for MDS47123601 — compatible with LG WM2801, WM2901, WM3001 series and Kenmore 796-series models Cross-references AP4998888, AH3535209, EA3535209, PS3535209, and 1464249 Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–60 minutes with basic hand tools Product Specifications Part Number MDS47123601 Part Type Front-Load Washer Door Boot Gasket / Door Seal / Door Diaphragm Condition Aftermarket Replacement Material EPDM Rubber Color Gray Application Front-Load Washers Compatible Series LG WM2801, WM2901, WM3001 series; Kenmore 796-series (LG-built) Compatible Brands LG, Kenmore Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Unplug the washer and turn off the water supply before beginning. Door boot gasket replacement on LG front-load washers requires removing the front panel and sometimes the top panel. Start by opening the door and carefully prying the outer spring retaining ring off the door gasket using a flat pry tool — work around the ring carefully to avoid tearing the new gasket. Pull the outer lip of the old gasket away from the door frame. Remove the front panel by unscrewing the lower panel screws and releasing the door latch, then unscrew the front panel screws. Reach inside to access the inner spring retaining ring on the drum side of the gasket, and remove the inner retaining ring. Disconnect the drain tube from the gasket (on models with one) and pull the old gasket off the drum. Install the new MDS47123601 gasket by seating the inner lip on the drum flange and reinstalling the inner retaining spring. Reconnect the drain tube if applicable. Reinstall the front panel, then seat the outer lip over the door frame and press the outer retaining spring back into place. Restore water supply and power, then run a rinse cycle to check for leaks. Tip: use a spring removal tool (available separately) to make reinstalling the retaining springs significantly easier. Tools needed: Phillips screwdriver, flat pry tool or spring removal tool. Frequently Asked Questions What is the difference between MDS47123601 and MDS47123602? These are two different door boot gaskets for different LG washer model series — they are not interchangeable. The MDS47123601 is for the WM2801, WM2901, and WM3001 series. The MDS47123602 is used on a different set of LG front-load models including the WM3250, WM3050, and WM3370 series. Always verify your exact LG model number before ordering to confirm which gasket your washer requires. Can I clean the door boot gasket instead of replacing it? If the gasket is in good physical condition but has mold or mildew buildup in the folds, cleaning is often effective. Wipe the inside and outside of the gasket with a solution of warm water and white vinegar or a diluted bleach solution (1/4 cup bleach per quart of water), getting into the folds where mold accumulates. Leave the door open between washes to allow the gasket to dry out. However, if the gasket has a physical tear, hole, crack, or is pulling away from the door frame, it must be replaced — cleaning will not restore a structural seal. How long does it take to replace the door boot gasket? For most DIYers, door boot gasket replacement on LG front-load washers takes approximately 30–60 minutes. The most time-consuming steps are removing the front panel and working with the inner and outer retaining springs. A spring removal tool (sold separately) makes reinstalling the retaining springs significantly faster and reduces the risk of tearing the new gasket during installation. Watching a model-specific installation video before starting is highly recommended. Will water in the drum area cause mold on the new gasket? Yes — mold on door boot gaskets is a very common issue with front-load washers because water and detergent residue tend to sit in the folds of the gasket between washes. To prevent mold on the new gasket, leave the washer door slightly open after each wash cycle to allow the interior and gasket to dry out. Periodically wipe the inside of the gasket folds with a clean dry cloth after washing. Running a monthly machine clean cycle or empty hot wash with washer cleaner also helps reduce residue buildup. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from durable EPDM rubber to match the dimensions and sealing performance of the original MDS47123601 door boot gasket. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO MDS47123602 Washer Door Boot Gasket – Compatible with LG Front-Load Washers Product Description Stop leaks and restore proper sealing with the XPARTCO MDS47123602 Washer Door Boot Gasket. This high-quality aftermarket replacement forms a watertight seal between the washer door and tub, preventing water from leaking during wash and spin cycles. A worn, torn, or mold-damaged gasket can lead to leaks, odors, or excessive vibration. Replacing it with this durable XPARTCO gasket provides long-lasting protection and reliable washer performance. Replaces Part Numbers MDS47123602, MDS64237201, MDS64237202, MDS47123612, EAP3535210, PD00028934, AH3535210, EA3535210, AP5218575, PS3535210. Compatibility This replacement door boot gasket fits select LG front-load washers. Example compatible models include (but are not limited to):LG WM2650HWA, WM3470HVA, WM3570HWA, WM8000HVA, and WM3997HWA. Always verify your washer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to match OEM fit, thickness, and sealing performance 💧 Leak-Proof Design – Forms a tight seal to prevent water escaping from the washer door 🌿 Mold-Resistant Material – High-grade rubber reduces mildew and odor buildup 🛠️ Durable Construction – Built to withstand heat, detergent, and high-spin vibration 🛡️ Fixes Common Issues – Solves leaks, mold/mildew odor, door seal tears, or water pooling 📐 Product Specification Part Number: MDS47123602 Component Type: Washer Door Boot Gasket (Door Seal) Material: High-strength, mold-resistant rubber Color: Gray (standard for LG models) Mounting: Installed between front tub and door frame using clamps Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, spring clamp tool (recommended), pliers ⚠️ Safety First: Always unplug the washer before installation to prevent electrical shock. Steps: Remove the washer top and front panel for access. Release the outer retaining spring clamp and remove the old gasket edge. Detach the inner clamp from the tub and remove the old gasket completely. Align and install the new XPARTCO MDS47123602 gasket around the tub opening. Reinstall inner clamp, then secure the outer clamp around the door frame. Reassemble the washer and perform a quick rinse cycle to test for leaks. ⏱️ Time Required: 30–45 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Stop washer leaks the right way — Add to Cart Now for a durable, budget-friendly replacement!

Read more less