ERP WR2X9144 Refrigerator Shelf Retainer Bar Support  Replaces Part Numbers: WR2X9144, AH299562, AP2060697, EA299562, PS299562, WR02X8776, WR02X9144, WR2X8776  This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO 242278801 Refrigerator Temperature Sensor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling accurately with the XPARTCO 242278801 Refrigerator Temperature Sensor. This high-quality replacement monitors the temperature inside the fresh-food and freezer compartments, sending signals to the control board to regulate cooling. A faulty sensor can cause temperature fluctuations, over-freezing, or warm spots. Replacing it with this reliable XPARTCO part ensures consistent temperature control and energy-efficient performance. Replaces Part Numbers 242278801 PD00029820, EAP8760187, AP5802148, 3016441, PS8760187. Compatibility This replacement temperature sensor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFHS2611LBNA, Electrolux E23BC78IPS3, and Kenmore 253.7041341C. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature accuracy and response rate ❄️ Accurate Cooling Control – Monitors refrigerator temperature for consistent performance 💰 Cost-Effective Fix – Reliable alternative to expensive OEM parts 🛠️ Simple Installation – Plug-in design for fast, easy replacement 🛡️ Fixes Common Issues – Solves warm refrigerator, freezing, or inconsistent cooling problems 📐 Product Specification Part Number: 242278801 Component Type: Refrigerator Temperature Sensor (Thermistor) Material: Plastic housing with thermistor probe and wiring harness Resistance Range: Approximately 2.7 kΩ at 77°F (varies by temperature) Mounting: Direct-fit installation in refrigerator liner or evaporator area Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, wire clip removal tool ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove interior shelves for access. Locate the old temperature sensor, usually near the evaporator or rear wall. Disconnect the sensor’s wiring harness and remove clips. Install the new XPARTCO 242278801 sensor in the same position. Reconnect wiring, reassemble interior parts, and restore power. Allow several hours for the refrigerator to stabilize temperature. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

WR72X240 Refrigerator Genuine OEM Crisper Drawer Slide (Right Side) – Compatible with GE, Hotpoint, and Kenmore Refrigerators Product Description Keep your refrigerator drawers sliding smoothly with the WR72X240 Refrigerator Genuine OEM Crisper Drawer Slide (Right Side). This factory-approved replacement supports the crisper drawer, allowing it to glide easily in and out. A cracked or worn slide can cause drawers to stick, tilt, or come off track. Replacing it with this Genuine OEM part restores proper alignment and ensures long-lasting performance. Replaces Part Numbers WR72X240, 2396, WR01X2049, WR1X2049, WR72X0240, AH306944, EA306944, AP2073484, PD00001633, EAP306944, PS306944. Compatibility This Genuine OEM crisper drawer slide (right side) fits select GE, Hotpoint, and Kenmore refrigerators. Example compatible models include (but are not limited to): GE TFX20JRBB, Hotpoint CSX20DAL, and Kenmore 363.9731783. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved slide ensures perfect drawer fit and alignment 🧊 Smooth Drawer Action – Restores effortless opening and closing of refrigerator crispers 💰 Durable Design – Made from high-strength molded plastic for long-term reliability 🛠️ Quick Installation – Direct-fit replacement installs in just a few minutes 🛡️ Fixes Common Issues – Solves drawer sticking, sagging, or misalignment problems 📐 Product Specification Part Number: WR72X240 Component Type: Refrigerator Crisper Drawer Slide (Right Side) Material: Durable plastic construction Mounting: Direct-fit replacement on refrigerator liner Orientation: Right-side mounting (when facing the refrigerator) Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Always unplug the refrigerator before performing any repairs to avoid electrical shock. Steps: Unplug the refrigerator. Remove crisper drawers and glass shelf above. Locate the damaged right-side slide rail and remove mounting screws. Position the new WR72X240 slide and secure with screws. Reinstall drawers and verify smooth operation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧰 Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore your crisper drawers to factory-smooth performance — Add to Cart Now for a genuine, factory-approved repair!

Read more less

WR72X239 Refrigerator Genuine OEM Crisper Drawer  Slide (Left Side) – Compatible with GE, Hotpoint, and Kenmore Refrigerators Product Description Ensure your refrigerator drawers glide smoothly with the WR72X239 Refrigerator Genuine OEM Crisper Drawer Slide (Left Side). This factory-approved slide rail supports and guides the crisper drawer, allowing it to open and close effortlessly. A worn or cracked slide can cause drawers to stick, sag, or fall off track. Replacing it with this Genuine OEM part restores the original fit, smooth movement, and durability. Replaces Part Numbers WR72X239, 2519, WR72X0239, AH306943, EA306943, AP2073483, PS306943. Compatibility This Genuine OEM crisper drawer slide (left side) fits select GE, Hotpoint, and Kenmore refrigerators. Example compatible models include (but are not limited to): GE TFX20JRBB, Hotpoint CSX20DAL, and Kenmore 363.9731783. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved slide for perfect drawer alignment 🧊 Smooth Operation – Restores easy gliding of refrigerator crisper drawers 💰 Durable Construction – High-strength molded plastic ensures long life 🛠️ Easy Installation – Direct-fit design installs in minutes 🛡️ Fixes Common Issues – Resolves sticking, sagging, or misaligned drawers 📐 Product Specification Part Number: WR72X239 Component Type: Refrigerator Crisper Drawer Slide (Left Side) Material: Heavy-duty plastic Mounting: Direct-fit replacement on refrigerator liner Orientation: Left-side mounting (when facing the refrigerator) Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver ⚠️ Safety First: Always unplug the refrigerator before performing any repairs. Steps: Unplug the refrigerator. Remove the crisper drawers and glass shelf above. Locate the damaged left-side slide rail and remove screws. Install the new WR72X239 slide rail securely with screws. Reinstall drawers and test for smooth operation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧰 Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore smooth drawer function — Add to Cart Now for a genuine, factory-approved repair!

Read more less

5304523741 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling efficiently with the 5304523741 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved replacement circulates cold air from the evaporator throughout the refrigerator and freezer compartments. A failing fan motor can cause uneven temperatures, frost buildup, or warm sections in your fridge. Installing this genuine OEM part ensures quiet, dependable air circulation and consistent cooling performance. Replaces Part Numbers 5304523741, AP6983831, EAP12746805, 4960926, PD00067011, PS12746805. Compatibility This genuine OEM fan motor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFSS2615TS0, Electrolux LFHB2751TF, and Kenmore 253.70313214. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved motor for reliable cooling performance ❄️ Efficient Air Circulation – Distributes cold air evenly throughout the compartments 💰 Energy-Efficient Operation – Restores temperature consistency and reduces compressor strain 🛠️ DIY Friendly – Direct-fit replacement installs in minutes 🛡️ Fixes Common Issues – Solves warm freezer, frost buildup, or noisy fan motor problems 📐 Product Specification Part Number: 5304523741 Component Type: Refrigerator Evaporator Fan Motor Material: Metal and high-temperature plastic housing Mounting: Direct-fit replacement in freezer compartment Operating Conditions: Designed for continuous low-temperature operation Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove freezer shelves and back panel. Locate and disconnect the wiring harness from the old fan motor. Remove mounting screws and take out the old motor and fan blade. Transfer the fan blade (if required) to the new 5304523741 motor. Mount the new motor, reconnect wiring, and reinstall back panel. Restore power and confirm even cooling and quiet operation. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🧊 Genuine OEM Replacement Part 🔄 30-Day Return Policy Keep your refrigerator running at peak performance — Add to Cart Now for a genuine, factory-approved repair!

Read more less

W10633627 Refrigerator Genuine OEM Evaporator Fan Motor – Compatible with Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air Refrigerators Product Description Keep your refrigerator cooling efficiently with the W10633627 Refrigerator Genuine OEM Evaporator Fan Motor. This factory-approved fan motor circulates cold air throughout the refrigerator and freezer compartments, maintaining consistent temperatures and preventing frost buildup. A failing fan motor can cause uneven cooling, temperature fluctuations, or unusual noises. Replacing it with this genuine OEM part restores quiet, efficient performance and reliable cooling. Replaces Part Numbers W10633627, 3023615, W10395278, W10673906, W10724602, W10798934, PD00005920, EAP8691851, AP5781863, PS8691851. Compatibility This genuine evaporator fan motor is compatible with select Whirlpool, Maytag, Amana, KitchenAid, and Jenn-Air refrigerators. Example compatible models include (but are not limited to): Whirlpool WRS325SDHZ01, Maytag MFF2558FEZ04, and KitchenAid KRFF507HPS00. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Genuine OEM Replacement – Factory-approved evaporator fan motor for Whirlpool-brand refrigerators ❄️ Improves Air Circulation – Ensures consistent cooling across all compartments 💰 Long-Lasting Performance – OEM-tested for quality and reliability 🛠️ Easy Installation – Installs in under 30 minutes with basic tools 🛡️ Fixes Common Issues – Resolves poor cooling, noisy operation, or frost buildup 📐 Product Specification Part Number: W10633627 Component Type: Refrigerator Evaporator Fan Motor Material: Durable plastic housing with precision-balanced motor Mounting: Direct-fit replacement for rear freezer panel Operating Conditions: Designed for refrigerator and freezer use Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the refrigerator before beginning repairs to avoid electrical shock. Steps: Unplug refrigerator and remove freezer shelves. Take off the rear panel inside the freezer compartment. Disconnect wiring harness from the old fan motor. Remove mounting screws and replace with the new W10633627 fan motor. Reconnect wiring, reinstall the rear panel, and restore power. Confirm that the fan runs quietly and air circulation is restored. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a genuine, factory-approved repair! 

Read more less

DA31-00103A Genuine OEM Refrigerator Condenser Fan Motor - Compatible with Samsung Product Description Ensure efficient cooling with the DA31-00103A Genuine OEM Refrigerator Condenser Fan Motor. This Samsung-manufactured motor is designed as a replacement for select Samsung refrigerators. It powers the fan to circulate air over the condenser coils, dissipating heat to maintain optimal refrigeration performance. This part addresses issues like insufficient cooling, frost buildup, unusual noises (e.g., chirping, buzzing), or the refrigerator running too frequently, often caused by a faulty or worn motor. Note: Includes (1) condenser fan motor (fan blade not included). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: DA31-00103A, IS-27210SCD6A, PD00002207, EAP4138348m AP4140906, 1472692, PS4138348. Compatibility: Compatible with select Samsung refrigerator models, including but not limited to: Samsung: RS2631SL, RS2631SL/XAA, RS2623WW/XAA, RS2624SW, RS2624SW/XAA, RS2624WW, RS2631SW, RS2631SW/XAA, RSC5DBSH, RS2621SW/XAA, RS2623BB, RS2623BB/XAA, RS2623SH, RS2623SL, RS2623VQ, RS2630SH, RS2630WW Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung refrigerators. 🔧 Specifications: Genuine OEM Samsung AC fan motor, 115V, 60Hz, 0.16A, 1300RPM, 1-5/8" shaft. 💪 Reliable Performance: Circulates air to dissipate heat from condenser coils for efficient cooling. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves insufficient cooling, frost buildup, noisy operation, or frequent running. Product Specification Part Number: DA31-00103A Component Type: Refrigerator condenser fan motor Material: Metal and plastic Electrical Specs: 115V, 60Hz, 0.16A, 1300RPM, 1-5/8" shaft, quick disconnect Compliance: UL-listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today! Add to cart now for a reliable fix!

Read more less

3405-001117 Genuine OEM Refrigerator Dispenser Control Switch - Compatible with Samsung Product Description Restore your refrigerator’s dispenser functionality with the 3405-001117 Genuine OEM Refrigerator Dispenser Control Switch. This Samsung-manufactured microswitch is designed for select Samsung refrigerators, controlling the activation of the water and ice dispenser mechanism. It ensures reliable dispensing, addressing issues like unresponsive or intermittent water/ice dispensing for a seamless user experience. Note: Includes (1) dispenser control microswitch. Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 3405-001117, DA34-00011A, 110634, 3727507, PD00033242, EAP11712663, AP5962465, PS11712663. Compatibility: Compatible with select Samsung refrigerator models, including but not limited to: Samsung: RS2530BBP, RS2530BSH, RS2530BWP, RS2555BB, RS2555SL, RS2555SW, RS2577BB, RS2577SL, RS2577SW, RS2630SH, RS2630WW, RS265LABP, RS265LAWP, RS277ACBP, RS277ACPN, RS277ACWP Common models: Samsung RS253BABB, RS253BAVQ, RS255BABB, RS255BASB, RS257BARB Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung refrigerators with water and ice dispensers. 🔧 Specifications: Genuine OEM Samsung microswitch, single-pole, double-throw (SPDT), 0.1A, 125/250V. 💪 Reliable Performance: Ensures precise activation of the water and ice dispenser mechanism. 🛠️ Easy Installation: Requires a screwdriver and pliers; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves unresponsive or intermittent water/ice dispensing issues. Product Specification Part Number: 3405-001117 Component Type: Refrigerator dispenser control switch Material: Durable plastic housing with metal contacts Operating Conditions: 0.1A, 125/250V, suitable for refrigerator dispenser environments Compliance: UL-listed, Prop 65 warning for California Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator’s dispenser working smoothly today! Add to cart now for a reliable fix!

Read more less

(4 Pack) XPARTCO 6600JB3001E Refrigerator Dispenser Switch - Compatible with LG, Kenmore, GE Product Description Restore your refrigerator’s dispenser functionality with the XPARTCO 6600JB3001E Refrigerator Dispenser Switch. This high-quality replacement switch is designed for select LG, Kenmore, GE, and Hotpoint refrigerators, controlling the dispensing of ice or water when the lever is pressed. It ensures reliable operation at a cost-effective price, addressing issues like no dispensing or intermittent dispensing. Note: Includes one micro switch (16A 1/2HP, 125/250VAC, 10T150 μ1E4 ). Disconnect power before installation. Verify compatibility with your refrigerator model. Replaces part numbers: 6600JB3001E, 1268245, AH3529277, SZM-V16-2FA-53, EA3529277, AP4650818, PS3529277. Compatibility: Compatible with models including but not limited to: LG: LSC24971ST/00, LRSC21934SW Kenmore: 79571039010, 79571039011, 79578789801 GE, Hotpoint: (select models with WR23X10783 compatibility, verify part number) Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Kenmore, GE, and Hotpoint refrigerators with front panel dispensers. 🔧 Specifications: Micro switch, 16A 1/2HP, 125/250VAC, T130 5E4μ, 1/4" terminals. 💪 Reliable Performance: Ensures precise activation of ice and water dispensing. 🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 15–30 minutes. 🛡️ Effective Fixes: Resolves no dispensing or intermittent dispensing issues. Product Specification Part Number: XPARTCO 6600JB3001E Component Type: Refrigerator dispenser micro switch Material: Plastic housing, metal contacts Electrical Rating: 16A 1/2HP, 125/250VAC Mounting: Snap-in or screw-mounted, 1/4" terminals Operating Conditions: Suitable for refrigerator dispenser environments Compliance: UL listed, Prop 65 warning for California. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator dispensing smoothly today! Add to cart now for a reliable fix!

Read more less