ERP 8540751 Washer Water Valve Replaces Part Numbers: WP8540751, 8540751, 8540043, AP6013067, PS11746288, WP8540751VP Description: This Water Inlet Valve is a replacement part for select Whirlpool washing machine models. It controls the flow of water into the washer during the fill cycles, ensuring that the correct amount of water enters the tub for washing and rinsing. This valve is crucial for the proper functioning of the washing machine, as it regulates the water temperature and flow. Common causes of a bad water inlet valve can include mineral deposits from hard water, wear and tear over time, or electrical malfunctions. These issues can cause the valve to either not open or close properly, leading to water flow problems.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

ERWH12X10334 Washer Lid Switch Replaces Part Numbers:WH12X10334, 1256927, AH1482372, AP3968471, EA1482372, PS1482372   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents Only - Warning: Cancer and Reproductive harm - https://www.p65warnings.ca.gov/

Read more less

DC97-15459HCM Washer Water Valve 120V, 60Hz, Four coil linear valve. Fits Specific Samsung Washer Models. Replaces Part Numbers:DC97-15459H, AP5621731, PS4220862.  Description: This Washer Water Inlet Valve is replacement part specific Samsung washer models. This washer water valve to regulate the flow of water into your washer, ensuring optimal performance and efficiency. This replacement part provides precise control over water levels, preventing leaks and maintaining proper water pressure during wash cycles.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO W11688995 Washer Water Inlet Valve - Compatible with Whirlpool, Maytag, Amana, Inglis Washers Product Description Restore your washer’s performance with the Replacement W11688995 Washer Water Inlet Valve. This high-quality replacement dual-coil cold water inlet valve replaces the Whirlpool W11688995, designed for select Whirlpool, Maytag, Amana, Inglis, and other front-load washing machines. Constructed with durable ABS plastic and reliable solenoids, it controls cold water flow into the washer during fill cycles, ensuring precise operation. It fixes issues like no water flow, slow filling, water leaks, fabric softener dispenser not emptying. Note: Inspect fill hoses for cracks or dryness and consider replacing them to prevent leaks. Check the hot water valve (W11688994) and motor pulley for wear if issues persist. Replaces part numbers: W11688995, W11316256, W11036930, W11486361, AP7218603, PS17216730, EAP12711564 Compatibility: Compatible with models including but not limited to: Whirlpool: WFW560CHW0, WFW560CHW1, WFW560CHW2, WFW5620HW0, WFW5620HW1, WFW5620HW2, WFW5620HW3, WFW6620HC0, WFW6620HC1, WFW6620HW0 Maytag: MHW5630HC0, MHW5630HC2, MHW6630HC1, MHW8630HC2 Amana: NFW5800HW0, NFW5800HW1, NFW5800HW2, NFW5800HW4 Inglis: IFW5900HW0, IFW5900HW1 Verify your model number or contact support for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Amana, Inglis, KitchenAid, Jenn-Air, Magic Chef, and other front-load washer models. 🔥 Specifications: Dual-coil cold water inlet valve, 120V, 60Hz, made of durable ABS plastic with reliable solenoids, 1/2" threaded NPT inlet with screen, two push-on outlet connections, solenoid resistance 500–1500 ohms. 💰 Cost-Effective Alternative: Replacement part offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires a Phillips screwdriver, 1/4" nut driver, pliers, and work gloves; typically installed in 20–40 minutes. 🛡️ Reliable Fixes: Resolves no water flow, slow filling, leaks, fabric softener dispenser issues, or error codes (F8E1, LO FL). Installation Notes: Tools Needed: Phillips screwdriver, 1/4" nut driver, pliers, work gloves, towels. Safety First: Unplug the washer and shut off the hot and cold water supplies before installation. Handle with Care: Take photos of wire and hose connections before disassembly to ensure correct reconnection. Test solenoid continuity (500–1500 ohms) with a multimeter to confirm valve failure. Inspect fill hoses and replace if cracked or dry to prevent flooding.

Read more less

WH23X29553CM Washer Water Valve 5 coil replacement solenoid valve used on New GE Front Load Washer models. Fits Specific GE Washer Models. Replaces Part Number WH23X29553, AP6983554, PS12743643. Description: This Water Valve is a replacement part compatible with specific GE washing machine models. As a key component located inside the washer cabinet, this valve precisely controls the flow of water into the machine during wash cycles. It allows for the filling of the tub with the proper amount of water at the correct temperature per the settings.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP DC97-15459H Washer Water Valve 120V, 60Hz, Four coil linear valve. Fits Specific Samsung Washer Models. Replaces Part Numbers:DC97-15459H, AP5621731, PS4220862.  Description: This Washer Water Inlet Valve is replacement part specific Samsung washer models. This washer water valve to regulate the flow of water into your washer, ensuring optimal performance and efficiency. This replacement part provides precise control over water levels, preventing leaks and maintaining proper water pressure during wash cycles.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

ERP 8578341 Washer Water Inlet Valve Replaces Part Numbers:WP8578341, 8578341, AP6013540, PS11746766.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP W10599356 Washer Water Valve Replaces part Numbers: W10599356, W10509710, AP5692067, PS8689091. Description: This Water Inlet Valve is a replacement part for select washing machine models. It is designed to regulate the flow of water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board or Timer, ensuring the right amount of cold water is provided.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

802317PCM Washer Door Lock and Switch Assembly Door latch and switch assembly. Fits Huebsch, Speed Queen and Unimac commercial front load washers. Replaces Part Numbers:802317P, 2002579, 802317, AP4481577, PS12207819   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

DC31-00054ACM Washer Drain Pump Motor Fits select Kenmore, Maytag, Whirlpool, Samsung front load washer. Replaces Part Numbers: DC31-00054A, DC97-15974C, 1534541, DC31-00016A, AP4202690, PS4204638. Replaces Motor for Pump: DC96-0774A, DC96-01414A, 34001320, 34001340, WP34001320, WP34001340 Description: The Drain Pump and Motor is a replacement part for select Kenmore, Maytag, Whirlpool, Samsung  washing machine models that is responsible for removing water from the washer at the end of the wash cycle. The pump forces water out through the drain hose so that clothing comes out free of excess water, making the drying process faster.    This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less