Washer Belts, Pulleys, Suspension & Transmission Parts

WH16X26913 Washer Genuine OEM Suspension Rod and Spring Rod and spring asm right- black Description: The Rod and Spring Asm Right-Black is an OEM replacement part for GE washing machines. It is responsible for providing the necessary tension and support for the washer drum. This assembly includes a durable rod and spring that work together to balance the drum and minimize excessive vibrations during the wash and spin cycles. Replaces Parts Numbers: WH16X26913, WH16X26714, AP6331892, PS12343383. California Residents only WARNING: California’s Proposition 65 

Read more less

4 Pack - XPARTCO 8182703 Washer Shock Absorber Replaces WP8182703 The XPARTCO 8182703 is an aftermarket replacement front-load washer shock absorber compatible with select Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, and Roper front-load washers in the GHW, WFW, MHWE, MFW, and KHWS series. The shock absorber is a hydraulic dampener that connects the outer washer tub to the base frame. During the spin cycle, the shock absorbers absorb and dampen the vibrations and movement generated by the spinning drum — keeping the washer stable, quiet, and protecting internal components from damage caused by excessive movement. Most compatible Whirlpool-family front-load washers use four shock absorbers — two at the front and two at the rear. When one or more shock absorbers wear out, the outer tub vibrates excessively, causing loud banging or thumping during the spin cycle. It is strongly recommended to replace all four shock absorbers at the same time. This listing is for a single shock absorber. It directly replaces WP8182703, 8181646, 1173231, and several additional cross-reference numbers. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 8182703 Washer Shock Absorber fixes front-load washers that shake violently, bang loudly, or walk across the floor during the spin cycle. The shock absorber dampens tub vibration. Most models use 4 shock absorbers — replace all 4 at the same time. Sold individually. Compatible with Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, and Roper front-load washers. Replaces WP8182703, 8181646, AP6011831, and more. Common Problems This Part Fixes Violent shaking or vibrating during the spin cycle Loud banging, thumping, or clunking noise during spin Washer "walking" across the floor during the spin cycle Outer tub hitting the sides of the cabinet during high-speed spin Spin cycle errors caused by excessive tub movement triggering the imbalance sensor Visible oil leak, broken mount, or collapsed shock absorber body Washer repeatedly pausing spin cycle and redistributing the load without resolving the vibration Replaces Part Numbers This shock absorber directly replaces the following OEM and cross-reference part numbers: WP8182703, 8182703, 1173231, 8181646, EAP11745030, AWP48892, PD00003153, AP6011831, PS11745030. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This shock absorber is compatible with select front-load washers from the following brands and series: Whirlpool front-load washers — GHW and WFW series Maytag front-load washers — MHWE and MFW series Kenmore / Sears front-load washers (select Whirlpool-built models) KitchenAid front-load washers — KHWS series Amana front-load washers Jenn-Air front-load washers Admiral front-load washers Roper front-load washers Important: Most compatible models use 4 shock absorbers (2 front, 2 rear). This part is sold individually. It is strongly recommended to replace all 4 at the same time, as the remaining absorbers have experienced the same wear and will fail soon after. Key Features Hydraulic dampener that connects the outer washer tub to the base frame — absorbs spin cycle vibration and prevents tub-to-cabinet contact Keeps the washer stable and quiet during high-speed spin cycles, protecting drum bearings, seals, and cabinet from premature wear High-quality reinforced construction — excellent toughness, oil resistance, and resistance to weak acids and alkalis for long service life Direct replacement for WP8182703 and 8181646 — no modification required Compatible with Whirlpool GHW, WFW, Maytag MHWE, MFW, and KitchenAid KHWS series front-load washers Sold individually — most models require 4 shock absorbers; replace all 4 at the same time Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number 8182703-4PK OEM Part Number WP8182703 Part Type Front-Load Washer Shock Absorber (Hydraulic Dampener) Condition Aftermarket Replacement Application Front-Load Washers Quantity Per Washer 4 (2 front, 2 rear) Compatible Brands Whirlpool, Maytag, Kenmore, KitchenAid, Amana, Jenn-Air, Admiral, Roper Compatible Series GHW, WFW, MHWE, MFW, KHWS Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Unplug the washer and turn off the water supply before beginning. To access the front shock absorbers, remove the lower front access panel. To access the rear shock absorbers, pull the washer away from the wall, disconnect the water hoses, and remove the rear panel. The shock absorbers connect the outer tub to the base frame with mounting pins at the top and bottom — turn the shock absorber 90 degrees at both pins to release and remove it. Install the new 8182703 shock absorber by inserting the pins into the top and bottom mounting brackets and rotating 90 degrees to lock in place. Replace all 4 shock absorbers during the same repair. Reconnect all panels and water hoses, plug in the washer, restore water supply, and run a spin cycle to verify normal operation. Work gloves are recommended as there are sharp edges inside the cabinet. Tools needed: Phillips screwdriver, channel-lock pliers, work gloves. Frequently Asked Questions What does the washer shock absorber do? The shock absorbers are hydraulic dampeners that connect the outer washer tub to the base frame of the machine. During the spin cycle — when the drum spins at high speeds — the shock absorbers absorb and dampen the vibrations and movement of the heavy outer tub, keeping it centered and preventing it from striking the sides of the washer cabinet. Without functioning shock absorbers, the washer vibrates violently, makes loud banging noises, and can "walk" across the floor during spin, potentially damaging internal components over time. How many shock absorbers does my front-load washer have? Most Whirlpool-family front-load washers compatible with the 8182703 shock absorber use four shock absorbers — two mounted at the front of the tub and two at the rear. This listing is for a single shock absorber. When replacing shock absorbers, it is strongly recommended to replace all four at once, as they all experience the same amount of use and the remaining absorbers are likely to fail soon after the first one. What is the difference between 8182703 and WP8182703? These are the same shock absorber. WP8182703 is the updated Whirlpool OEM part number that superseded the original 8182703. The 8181646 is also a cross-reference to this same part. This aftermarket replacement is compatible with all three numbers. My washer still vibrates after replacing the shock absorbers — what else could it be? If vibration persists after replacing all four shock absorbers, other possible causes include an unbalanced or overloaded drum, worn drum bearings, a failing suspension spring, or the washer not being level on the floor. Check that the washer's leveling feet are adjusted so all four corners are in firm contact with the floor. Also confirm the load is not oversized — overloading is the most common cause of spin vibration and can prematurely wear shock absorbers. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from high-quality reinforced materials to match the dimensions and performance of the original WP8182703 shock absorber. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

134511600 Genuine OEM Frigidaire Washer Drive Belt The 134511600 is a Genuine OEM Frigidaire replacement washer drive belt compatible with a wide range of Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, White-Westinghouse, and Crosley top-load and laundry center washers — including the FLS, FWS, FLEB, GLWS, FEZ, FGZ, and related series. The drive belt is a wrapped V-style rubber belt that connects the motor pulley to the washer tub, transferring the motor's rotation to spin the basket during the wash and spin cycles. When the belt breaks, wears out, or stretches, the motor continues to run but the basket stops rotating — the washer fills with water and drains but does not agitate or spin, leaving clothes soaking wet. This is a Genuine OEM part manufactured by Frigidaire to factory specifications. The belt measures approximately 32-1/4" in length (30" inner circumference) x 1/2" wide x 5/16" high — a wrapped V-belt profile that seats on the motor pulley. It directly replaces 1156860, 131234000, 131686100, 134161100, 145371, 3204418, F145371, F145371-000, AP3867042, AH1146950, EA1146950, EAP1146950, LB117, PD00000111, and PS1146950. Installs in 15–30 minutes with basic hand tools. Quick Answer The 134511600 Genuine OEM Frigidaire Washer Drive Belt fixes Frigidaire-platform top-load washers that won't agitate, won't spin, pump and drain but don't spin, make a burning rubber smell, or are noisy. Wrapped V-belt, approx. 32-1/4"L (30" inner circumference) x 1/2"W x 5/16"H, black rubber. Genuine OEM. Replaces 1156860, 131234000, 131686100, 134161100, 3204418, F145371, AP3867042, AH1146950, EA1146950, LB117, PS1146950. Compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, White-Westinghouse, and Crosley. Common Problems This Part Fixes Washer not agitating — belt has broken or slipped off the motor pulley Washer pumps and drains normally but does not spin clothes — belt failed Washer fills and drains but drum never moves — no belt drive to the basket Burning rubber smell during the wash or spin cycle — belt slipping on the motor pulley Squealing or grinding noise during operation — worn or slipping belt Washer spinning slowly or unevenly — stretched belt losing grip on the pulley Belt visibly cracked, frayed, broken, or missing inside the washer cabinet Replaces Part Numbers This washer drive belt directly replaces the following OEM and cross-reference part numbers: 134511600, 1156860, 131234000, 131686100, 134161100, 145371, 3204418, AH1146950, EA1146950, F145371, F145371-000, AP3867042, PS1146950. Contact our support team with your model number if you need confirmation before ordering. Compatibility This washer drive belt is compatible with select top-load washers and laundry centers from the following brands and series: Frigidaire washers — FLS, FWS, FLEB, FEZ, FGZ, FLSG, GLWS, GLET, FWX, GWS series and related models Electrolux washers (select Frigidaire-platform models) Gibson washers (select models) Kelvinator washers (select models) Kenmore / Sears washers — 41 series and other Frigidaire/Electrolux-built models Tappan washers (select models) White-Westinghouse washers (select models) Crosley washers (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Genuine OEM part manufactured by Frigidaire to factory specifications — guaranteed fit and performance Wrapped V-belt style — connects the motor pulley to the washer tub to spin the basket during agitation and spin cycles Dimensions: approximately 32-1/4"L (30" inner circumference) x 1/2"W x 5/16"H Black rubber construction — designed to withstand continuous flexing and motor load under normal wash conditions Replaces 1156860, 131234000, 131686100, 134161100, 3204418, F145371, AP3867042, LB117, PS1146950, and additional cross-references Compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, White-Westinghouse, and Crosley washers DIY repair — installs in 15–30 minutes with basic hand tools Product Specifications Part Number 134511600 Part Type Washer Drive Belt (Wrapped V-Belt) Condition Genuine OEM Application Top-Load Washers and Laundry Centers Belt Style Wrapped V-belt Length (overall) Approximately 32-1/4 inches Inner Circumference Approximately 30 inches Width 1/2 inch Height 5/16 inch Material Rubber Color Black Quantity Sold individually (1 belt) Compatible Brands Frigidaire, Electrolux, Gibson, Kelvinator, Kenmore, Tappan, White-Westinghouse, Crosley Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. On most compatible Frigidaire-platform washers, the drive belt is accessed by removing the back panel or by laying the washer on its side to access the motor and pulley from the bottom. The belt wraps around the motor pulley (small, at the motor shaft) and the transmission pulley or basket (large, beneath the tub). Release the old belt by slipping it off the motor pulley — the motor may need to be slightly unbolted and shifted to relieve tension, depending on your model. Route the new 134511600 belt around both pulleys in the same path as the original and seat it firmly in the V-groove on each pulley. If the motor position is adjustable, re-tension the belt so it deflects no more than 1/2 inch when pressed in the middle. Reinstall the back panel, restore power and water, and run a test cycle to confirm the basket agitates and spins normally. Tools needed: Phillips screwdriver, socket set or adjustable wrench. Frequently Asked Questions What does the washer drive belt do? The drive belt is the power transmission link between the motor and the washer basket. The motor turns a small drive pulley on its shaft, and the drive belt wraps around both the motor pulley and the larger transmission or basket pulley, transferring the motor's rotation to spin the basket. Without an intact, properly tensioned belt, the motor runs but the basket stays still — the washer fills with water, pumps it out, but never agitates or spins clothes. A broken, cracked, or slipping drive belt is one of the most common causes of washer failure on Frigidaire-platform top-load models. What is the difference between 134511600 and 1156860? These are the same drive belt. 1156860 is an older cross-reference part number and item number for the same belt that Frigidaire consolidated into the current part number 134511600. The 134161100, 131234000, 131686100, and 3204418 numbers are also cross-references for this same belt from various parts catalog revisions. All are covered by this OEM belt. My washer pumps but won't spin — is it the belt? A washer that pumps and drains normally but does not spin the basket is a classic drive belt failure symptom on Frigidaire-platform top-load washers. Since the drain pump is typically driven separately from the basket, a broken belt will stop basket rotation while leaving the pump functioning normally. Open the back panel and visually inspect the belt — if it is broken, stretched to the point of slipping, or missing entirely, replacing the 134511600 belt will restore normal spin and agitation. If the belt looks intact but the basket still doesn't turn, check the motor capacitor or idler pulley. Should I also inspect the idler pulley when replacing this belt? Yes — since the washer must be partially disassembled to replace the belt, this is a good opportunity to inspect the idler pulley for wear. The idler pulley maintains belt tension on compatible models — if the pulley bearing is worn or the spring tension is reduced, the belt will slip even when new, causing a burning rubber smell and poor spin performance. The Frigidaire washer idler pulley is sold separately (part 131462600 or 134371700 depending on model). If the idler pulley wobbles or the wheel doesn't spin freely by hand, replace it at the same time as the belt. Is this a Genuine OEM or aftermarket part? This is a Genuine OEM part manufactured by Frigidaire to factory specifications. It is the exact same drive belt installed in compatible Frigidaire, Electrolux, Gibson, and related brand top-load washers from the factory — guaranteed fit, materials, and performance. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

ERP DC97-05280S Washer Suspension Rod Replaces Part Numbers: DC97-05280S, 3998020, AP5799907, PS8764053   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP WH01X10727 Washer Shock Absorber Replaces Part Numbers: WH01X10727, 3029711, AP5793647, PS8756975.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

5303280326CM Washer Drive Belt Washing machine belt, length 31 1/2”, width 1/2”, characteristics, medium “v”- shaped. This Belt is for Older, Top-load Frigidaire Washer   Replaces Parts Numbers: 5303280326, 08004064, 133171, 144667, 144697, 3161152, 3235, 5303161152, 8004064, 8195-171, 8X318, ER5303280326, F000133171, F133171, F133171-000, F133171000, F144667-000, LB113, TJ5303280326, WH01X2630, WH07X0086, WH07X0098, WH1X2630, WH7X86, WH7X98, AP2142495, PS459613.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

ERP 27001006 Washer Belt  Brand new washing machine belt replaces Maytag, Amana, Speed Queen, 38174, 27001006. Measures: 29-1/2" long X 1/2" wide.    Replaces Part Numbers: 27001006, PS11740577, AP6007462, WP27001006, 2200063, 40053606-REPL, 40053601-REPL, 38174-REPL, 40053606, 40053601, 38174      This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

2 Pack - XPARTCO 285753A Washer Direct Drive Motor Coupler The XPARTCO 285753A is an aftermarket replacement direct drive motor coupler (also called a motor coupling or drive coupler) compatible with a wide range of Whirlpool-family top-load washers including Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The motor coupler connects the drive motor shaft to the transmission — transferring the motor's power to the transmission to drive the agitator and spin the drum during wash and spin cycles. It is a deliberate weak point in the drivetrain: if the washer is overloaded, the coupler breaks apart first, protecting the far more expensive motor and transmission from damage. This is the updated 285753A design with metal sleeves for added strength — it replaces all previous coupler styles and versions including the original 285753, 280152, 285743, and 285140. This kit includes 2 plastic coupling halves and 1 rubber isolation dampener. Dimensions approximately 2" L x 1-1/4" W x 2" H. Fits direct-drive top-load washers only — not compatible with belt-drive machines. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 285753A Washer Motor Coupler fixes top-load washers that fill and drain normally but will not agitate or spin. The motor coupler connects the motor to the transmission — when it breaks, the motor runs but neither the agitator nor the drum moves. Kit includes 2 plastic coupling halves and 1 rubber dampener. Updated design with metal sleeves. Replaces all previous coupler versions including 285753, 280152, 285743, 285140. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, and more direct-drive top-load washers. Common Problems This Part Fixes Washer fills with water and drains but will not agitate or spin Motor runs (you can hear it) but agitator and drum do not move Washer spins slowly or incompletely — clothes still very wet after spin cycle Loud humming or buzzing from the motor area without agitation or spin Burning rubber or plastic smell during the wash or spin cycle Washer shakes excessively — broken coupler causing uneven power transfer Broken plastic or rubber pieces visible inside the bottom of the washer cabinet Replaces Part Numbers This motor coupler directly replaces the following OEM and cross-reference part numbers: 285753A, 1195967, 21003, 280152, 285140, 285743, 285753, 285753AVP, 3352470, 3363664, 3364002, 3364003, 62672, 62693, 661560, 80008, 8559748, AWP39583, PD00002353, AH1485646, EAP1485646, EA1485646, TJ285753, ER285753, AP3963893, PS1485646. The 285753A replaces all previous motor coupler styles and versions. If your parts diagram shows any of the older numbers above, the 285753A is the correct current replacement. Compatibility This motor coupler is compatible with select direct-drive top-load washers from the following brands: Whirlpool top-load washers (direct drive — no belt) Kenmore / Sears top-load washers — 70 series, 80 series, 90 series, and 110 series (Whirlpool-built) KitchenAid top-load washers Maytag top-load washers (direct drive models) Amana top-load washers Roper top-load washers Admiral top-load washers Estate top-load washers Crosley top-load washers Inglis top-load washers Magic Chef top-load washers Important: The 285753A is for direct-drive top-load washers only — machines where the motor connects directly to the transmission without a belt. It is not compatible with front-load washers or older belt-drive top-load washers. If you can see a drive belt inside your washer cabinet, this is not the correct part. Key Features Connects the drive motor shaft to the transmission — transfers motor power to drive the agitator and spin drum Intentional sacrificial part — designed to break before the motor or transmission during overload, saving far more expensive components Updated 285753A design with metal sleeves — stronger than original all-plastic versions; replaces all previous coupler styles Kit includes 2 plastic coupling halves and 1 rubber isolation dampener — complete assembly Dimensions: approximately 2" L x 1-1/4" W x 2" H Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef direct-drive washers Replaces all previous coupler versions including 285753, 280152, 285743, and 285140 Aftermarket replacement built to OEM-equivalent quality standards Cost-effective DIY repair — typically under $15 and 30–45 minutes of work Product Specifications Part Number 285753A Part Type Washer Direct Drive Motor Coupler (Motor Coupling Kit) Condition Aftermarket Replacement Application Direct-Drive Top-Load Washers (no belt) Dimensions Approx. 2" L x 1-1/4" W x 2" H Color Black / Off-White Material Rubber / Plastic / Metal (metal sleeve inserts) Kit Includes 2 plastic coupling halves, 1 rubber isolation dampener Compatible Brands Whirlpool, Kenmore, KitchenAid, Maytag, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef Installation Notes ⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Remove the washer's cabinet by releasing the top panel clips and removing the front panel screws — the motor and transmission are at the bottom of the machine. The motor coupler is a three-piece assembly between the motor shaft and the transmission input shaft. Pull the motor forward to release it from the mounting clips. The broken coupler pieces will likely fall out at this point — inspect the motor shaft and transmission shaft for any remaining plastic debris and clear it. Press the new rubber dampener onto the motor shaft coupling half first, then onto the transmission shaft coupling half, and snap the motor back into the mounting clips. Verify both coupler halves are seated securely and the rubber dampener is centered between them. Reassemble the front panel and top panel. Restore power and run a short cycle to confirm the agitator and spin function normally. Work gloves recommended — sharp sheet metal edges inside the cabinet. Tools needed: Phillips screwdriver, 1/4" nut driver, flat-head screwdriver, work gloves. Frequently Asked Questions What does the motor coupler do? The motor coupler is a three-piece assembly — two plastic coupling halves and a rubber dampener — that connects the drive motor shaft to the transmission input shaft in direct-drive washing machines. The motor spins the coupler, which transfers that rotation to the transmission, which in turn drives the agitator and drum. The rubber dampener absorbs shock and vibration between the rigid motor and transmission shafts during direction changes. The coupler is intentionally designed as the weakest link in the drivetrain — if the washer is overloaded or the transmission seizes, the coupler breaks first to protect the far more expensive motor and transmission from damage. My washer fills and drains but won't agitate or spin — is the motor coupler the cause? Yes — this is the classic symptom of a broken motor coupler. Because the pump is typically driven directly by the motor before the coupler connection, a broken coupler allows the motor to run and the pump to drain normally, but neither the agitator nor the spin drum receives any power. If you can hear the motor running but nothing moves, open the washer cabinet and inspect the coupler — you will likely find broken plastic pieces at the bottom of the cabinet near the motor and transmission. Why does the motor coupler break? The most common cause is overloading — packing too many heavy items into the washer creates enough mechanical resistance that the coupler snaps rather than allowing the motor to be damaged. Other causes include a worn or seized transmission, a worn motor, normal wear over many years of use, or a single sudden jam caused by a foreign object. If your coupler breaks a second time shortly after replacement, inspect the transmission for signs of wear or binding — a stiff or seized transmission will continue to break new couplers. What is the difference between 285753 and 285753A? The 285753A is the updated current version that superseded the original 285753. The A version incorporates metal sleeve inserts in the plastic coupling halves for improved strength and durability compared to the original all-plastic design. The 285753A replaces all previous versions — including 285753, 280152, 285743, and 285140 — and is the correct part to order regardless of which older number is listed in your washer's parts diagram. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from rubber, plastic, and metal to match the dimensions and performance of the original 285753A motor coupler. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

 .pom { font-family: 'Inter', sans-serif; color: #1e293b; line-height: 1.75; } .pom *, .pom *::before, .pom *::after { box-sizing: border-box; } .pom h2 { font-size: 21px; font-weight: 900; color: #0f172a; margin: 0 0 12px; letter-spacing: -0.01em; } .pom h3 { font-size: 17px; font-weight: 900; color: #0f172a; margin: 0 0 12px; letter-spacing: -0.01em; } .pom-card { background: #fff; border: 1px solid #e2e8f0; border-radius: 12px; padding: 20px 22px; margin-bottom: 16px; } .pom-card-blue { background: #eff6ff; border-color: #bfdbfe; } .pom-card-green { background: #f0fdf4; border-color: #bbf7d0; } .pom-qa { background: #eff6ff; border-left: 4px solid #1e40af; border-radius: 0 8px 8px 0; padding: 16px 20px; margin-bottom: 16px; } .pom-qa-label { font-size: 10px; font-weight: 900; letter-spacing: 0.1em; text-transform: uppercase; color: #1e40af; margin: 0 0 6px; } .pom ul { margin: 0; padding: 0; list-style: none; } .pom ul li { position: relative; padding-left: 20px; margin-bottom: 8px; font-size: 16px; } .pom ul li::before { content: ""; position: absolute; left: 0; top: 9px; width: 7px; height: 7px; border-radius: 50%; background: #1e40af; } .pom-list-green li::before { background: #15803d; } .pom-specs-table { width: 100%; border-collapse: collapse; font-size: 15px; } .pom-specs-table tr { border-bottom: 1px solid #f1f5f9; } .pom-specs-table tr:last-child { border-bottom: none; } .pom-specs-table td { padding: 9px 4px; } .pom-specs-table td:first-child { color: #1e293b; width: 45%; font-style: italic; } .pom-specs-table td:last-child { font-weight: 700; color: #0f172a; } .pom-warning { background: #fffbeb; border-left: 4px solid #f59e0b; border-radius: 0 8px 8px 0; padding: 14px 18px; font-size: 15px; color: #92400e; line-height: 1.65; } .pom-warning strong { display: block; margin-bottom: 5px; font-size: 11px; text-transform: uppercase; letter-spacing: 0.08em; } .pom-faq-item { margin-bottom: 16px; padding-bottom: 16px; border-bottom: 1px solid #f1f5f9; } .pom-faq-item:last-child { border-bottom: none; margin-bottom: 0; padding-bottom: 0; } .pom-faq-q { font-weight: 700; color: #0f172a; margin-bottom: 5px; font-size: 16px; } .pom-faq-a { font-size: 15px; color: #334155; margin: 0; line-height: 1.65; } .pom-badges { display: flex; flex-wrap: wrap; gap: 10px; margin-top: 14px; } .pom-badge { background: #f0fdf4; border: 1px solid #bbf7d0; color: #15803d; font-size: 14px; font-weight: 700; padding: 6px 14px; border-radius: 999px; } .pom p { margin: 0 0 12px; font-size: 16px; } .pom p:last-child { margin-bottom: 0; } XPARTCO W10734521 Washer Clutch Kit (Slider Kit) The XPARTCO W10734521 is an aftermarket replacement washer clutch kit (also called a slider kit) compatible with Whirlpool and Maytag high-efficiency top-load washers in the Bravos, Bravos XL, Bravos X, and related MVW and WTW series. The clutch kit is the mechanism in the washer's gearcase assembly that engages the basket during the spin cycle. On compatible models, the clutch slider moves to lock the basket to the drive shaft so the motor can spin it at high speed. When the clutch wears out or the slider cracks, the basket spins weakly, inconsistently, or not at all — even though the motor and other components are operating normally.This kit is designed for the newer-generation Whirlpool/Maytag Bravos-platform HE top-load washers — distinct from the Cabrio/Centennial-platform models that use the W10913953 shift actuator. It directly replaces W10006494, W10275082, W10447975, W10905025, W10006484, AP5952873, PS10060062, and several additional cross-reference numbers. The assembly may include multiple components — refer to your model's parts diagram to confirm all included pieces. Installs in 30–60 minutes with basic hand tools.Quick AnswerThe XPARTCO W10734521 Washer Clutch Kit fixes Whirlpool and Maytag Bravos-platform HE top-load washers where the basket spins weakly, inconsistently, or not at all during the spin cycle. The clutch slider engages the basket to the drive shaft. Replaces W10006494, W10275082, W10447975, W10905025, W10006484, AP5952873, PS10060062. Compatible with Maytag MVW7xxx/MVW8xxx/MVWB, Whirlpool WTW7xxx/WTW8xxx/WTW9xxx, Amana, Kenmore, Admiral, Crosley, Estate, Jenn-Air, KitchenAid, Magic Chef, and Roper washers.Common Problems This Part Fixes Basket not spinning or spinning weakly during the spin cycle Basket spinning at low speed only — not reaching high-speed spin Clothes soaking wet after a full cycle — washer not completing high-speed spin Unusual clicking, grinding, or rattling noise during the spin cycle Spin cycle starting but basket quickly stopping or slowing Error codes related to spin or basket speed on compatible models Clutch slider visibly cracked, worn down, or missing plastic teeth Replaces Part NumbersThis clutch kit directly replaces the following OEM and cross-reference part numbers:W10734521, 3452506, W10006484, W10006494, W10275082, W10447975, W10905025, AP5952873, AWP41487, EAP10060062, PD00025495, PS10060062. If your part number is not listed above, contact our support team before ordering and we will verify compatibility.CompatibilityThis clutch kit is compatible with select HE top-load washers on the Bravos platform from the following brands and series: Maytag top-load washers — Bravos, Bravos XL series (MVW7230, MVW8230, MVWB755, MVWB757, MVWB765, MVWB835, MVWB855, MVWB865, MVWB965 and related models) Whirlpool top-load washers — WTW7000, WTW7040, WTW7500, WTW8040, WTW8500, WTW9500 and related models Kenmore / Sears top-load washers (Whirlpool-built Bravos-platform models) Amana top-load washers (select Bravos-platform models) Admiral top-load washers Crosley top-load washers Estate top-load washers Jenn-Air top-load washers KitchenAid top-load washers Magic Chef top-load washers Roper top-load washers Important: The W10734521 clutch kit is for the newer Bravos-platform HE top-load washers. It is not the same as the W10913953 shift actuator used on older Cabrio/Centennial-platform models. Always verify your exact model number before ordering — these two parts are not interchangeable.Key Features Engages the washer basket to the drive shaft during the spin cycle — enables high-speed basket rotation Worn or cracked clutch slider allows the basket to slip off the drive shaft, causing weak or no spin Compatible with Maytag Bravos/Bravos XL (MVW7xxx/MVW8xxx/MVWB series) and Whirlpool WTW7xxx/WTW8xxx/WTW9xxx HE top-load washers Replaces W10006494, W10275082, W10447975, W10905025, W10006484, and AP5952873 Compatible with 11 major appliance brands on the Bravos platform Note: this is for Bravos-platform models — not for Cabrio/Centennial models (those use W10913953) Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 30–60 minutes with basic hand tools Product Specifications Part Number W10734521 Part Type Washer Clutch Kit (Slider / Basket Drive Clutch) Condition Aftermarket Replacement Application HE Top-Load Washers — Bravos Platform (MVW, WTW series) Function Engages basket to drive shaft during spin cycle Material Plastic / Metal Platform Note Bravos/Bravos XL platform only — not for Cabrio/Centennial (W10913953) Compatible Brands Whirlpool, Maytag, Kenmore, Amana, Admiral, Crosley, Estate, Jenn-Air, KitchenAid, Magic Chef, Roper Installation Notes⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off the water supply before beginning. Wear work gloves throughout — there are sharp edges inside the washer cabinet. The clutch kit is located within the gearcase assembly beneath the washer tub. To access it, remove the washer's top panel by releasing the clips under the lid hinge covers, then lift and remove the cabinet. Disconnect the drive belt and remove the gearcase from the drive shaft. The clutch slider is mounted on the gearcase — remove the old slider by unscrewing any retaining hardware and sliding it off. Install the new W10734521 clutch kit components in the same positions per the included instructions. Reinstall the gearcase, reconnect the drive belt, and reinstall the cabinet. Restore power and water, then run a spin cycle to verify the basket reaches full spin speed. Note: consult your model's parts diagram to confirm which components are included with this kit for your specific model. Tools needed: Phillips screwdriver, Torx screwdriver (T25/T27), socket set, work gloves.Frequently Asked QuestionsWhat does the washer clutch do?The clutch kit is the mechanism that connects the basket to the drive shaft during the spin cycle on compatible Whirlpool and Maytag HE top-load washers. During agitation, the basket needs to stay still while only the wash plate or agitator moves — the clutch disengages the basket from the shaft for this phase. When the washer transitions to spin, the clutch slider moves to lock the basket to the drive shaft so the motor can spin both together at high speed. When the plastic slider wears out or cracks, the basket can no longer lock onto the shaft, resulting in weak, intermittent, or no spin despite the motor running normally.What is the difference between W10734521 and W10913953?Both are Whirlpool-family washer clutch/actuator components, but for completely different washer platforms. The W10734521 is a clutch slider kit for the newer Bravos-platform HE top-load washers (Maytag MVW7xxx/MVW8xxx/MVWB and Whirlpool WTW7xxx/WTW8xxx/WTW9xxx). The W10913953 is a shift actuator gearmotor for the older Cabrio/Centennial-platform top-load washers (Whirlpool WTW4xxx/WTW5xxx and Maytag MVWC series). They are different parts that do different things on different generations of washers and are not interchangeable. Always verify your model number before ordering.My washer agitates but won't spin — is this the right part?A washer that agitates normally but fails to spin is a classic symptom of a worn clutch kit on compatible Bravos-platform models. Since the clutch is only engaged during the spin phase, agitation can work normally while the spin fails. Before replacing the clutch, also check that the lid switch is functioning and that the washer is not overloaded — both can prevent spin without any mechanical fault. If the lid switch is good and the load is normal-sized but spin is still weak or absent, the W10734521 clutch kit is the most likely cause.Does this kit work with the Maytag Bravos XL?Yes — the W10734521 is compatible with select Maytag Bravos and Bravos XL top-load washer models in the MVW7230, MVW8230, MVWB755, MVWB765, MVWB835, MVWB855, MVWB865, MVWB965 series and related models. Always verify your specific model number before ordering to confirm this kit is correct for your particular washer.Is this an OEM or aftermarket part?This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal to match the dimensions and performance of the original W10734521 clutch kit.Shop With ConfidenceA U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

21366 Washer Spanner Nut Replaces WP21366 Replaces Part Numbers: WP21366, 21366, 16060, LP331, AP6005824, PS11738884.

Read more less

WH03X36897 Washer Genuine OEM Mode Shifter Actuator – Compatible with GE & Hotpoint Washers Product Description Restore proper wash and spin operation with the WH03X36897 Washer Genuine OEM Mode Shifter Actuator. This factory-approved component shifts the washer between agitation and spin modes during the wash cycle. A failing mode shifter can cause the washer to agitate but not spin, spin improperly, make clicking noises, or display cycle errors. Replacing it with this Genuine OEM actuator ensures precise shifting, reliable performance, and correct cycle operation. Replaces Part Numbers WH03X36897, WH18X27186, AP7225424, PD00087767, EAP17626543, PS17626543 Compatibility This Genuine OEM mode shifter actuator fits select GE and Hotpoint top-load washers. Example compatible models include (but are not limited to):GE GTW335ASN1WW, GTW465ASN2WW, GTW485ASJ1WSHotpoint HTW240ASK6WS Always verify your washer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🧩 Genuine OEM Replacement – Factory-certified for exact fit and dependable operation 🔄 Accurate Mode Shifting – Properly switches between wash and spin cycles 🔇 Quiet, Smooth Operation – Reduces clicking or erratic shifting noises 💪 OEM-Grade Durability – Designed for long service life under repeated cycles 🛡️ Fixes Common Issues – Solves no-spin, improper agitation, or cycle errors 📐 Product Specification Part Number: WH03X36897 Component Type: Washer Mode Shifter Actuator Voltage: 120V AC Mounting: Direct-fit installation on transmission assembly Function: Controls agitation-to-spin shifting Compliance: Genuine OEM certified 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock. Steps: Disconnect power and tilt the washer back for bottom access. Locate the mode shifter actuator near the transmission. Disconnect the wiring harness and remove mounting screws. Install the new WH03X36897 actuator and secure it in place. Reconnect wiring, return washer upright, and restore power. Run a test cycle to confirm proper shifting. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Genuine OEM Replacement Part 🔄 30-Day Return Policy Restore correct washer cycle operation — Add to Cart Now for a factory-quality repair!

Read more less

XPARTCO 5304516132 Washer Drive Belt – Compatible with Frigidaire, Electrolux, and Kenmore Washers Product Description Keep your washer spinning smoothly with the XPARTCO 5304516132 Washer Drive Belt. This high-quality aftermarket replacement transfers power from the motor to the washer drum, enabling proper agitation and spin speed. A worn, stretched, or broken belt can cause slow spinning, loud noises, or the drum not turning at all. Replacing it with this durable XPARTCO belt restores reliable performance and efficient wash cycles. Replaces Part Numbers 5304516132, 12638000001161, 7PJE607, PD00055739, EAP12585162, 4839724, AP6339955, PS12585162. Compatibility This replacement drive belt fits select Frigidaire, Electrolux, and Kenmore front-load washers. Example compatible models include (but are not limited to): Frigidaire FAFW3801LW, Electrolux EWFLS70JSS0, and Kenmore 417.41122310. Always verify your washer's model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM fit and performance at a lower cost ⚙️ Restores Drum Motion – Ensures proper spinning, agitation, and wash performance 💪 Durable Construction – Made with reinforced rubber for long-lasting tension 🛠️ Easy Installation – Designed for quick DIY replacement 🛡️ Fixes Common Issues – Solves slow spinning, no spin, squealing noises, or drum not turning 📐 Product Specification Part Number: 5304516132 Component Type: Washer Drive Belt Material: Reinforced rubber with tension-resistant cord Dimensions: Exact OEM-equivalent sizing for proper tension Mounting: Wraps around motor pulley and drum pulley Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver (depending on model) ⚠️ Safety First: Always unplug the washer before servicing to avoid electrical shock. Steps: Unplug the washer and remove the rear access panel. Locate the old drive belt and remove it from the motor and drum pulleys. Position the new XPARTCO 5304516132 belt around the drum pulley first. Stretch the belt onto the motor pulley while rotating the drum. Reinstall the back panel, restore power, and test wash/spin cycles. ⏱️ Time Required: 10–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore smooth washer performance — Add to Cart Now for a dependable, affordable repair!

Read more less