XPARTCO W11429587 Dryer Door Catch
The XPARTCO W11429587 is an aftermarket replacement dryer door catch compatible with a wide range of Whirlpool-family dryers including Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Jenn-Air, Admiral, Roper, Inglis, Crosley, Magic Chef, and Norge. The door catch is the plastic spring-clip mechanism mounted on the dryer door or front panel that snaps over the door strike to hold the dryer door firmly closed during operation. When the catch breaks or wears out, the door will not stay closed, the dryer will not start, or the door will pop open mid-cycle.
This is a sold-as-single door catch with a snap-in installation that typically takes under five minutes and requires no tools. It directly replaces OEM part numbers WPW10610880, W10610880, W10529190, W10696503, and W11224630 — all of which were superseded by the current W11429587 part number. Made from durable plastic designed to withstand repeated opening and closing through the life of the dryer.
Quick Answer
The XPARTCO W11429587 Dryer Door Catch fixes Whirlpool-family dryers where the door won't stay closed, pops open during a cycle, or where the dryer won't start because the door switch isn't being activated. Sold individually. Snap-in installation — no tools required, installs in under 5 minutes. Compatible with Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Jenn-Air, Admiral, Roper, Inglis, Crosley, Magic Chef, and Norge dryers.
Common Problems This Part Fixes
- Dryer door will not stay closed during the drying cycle
- Door pops open mid-cycle, interrupting the drying cycle
- Dryer will not start because the door is not latching securely enough to activate the door switch
- Door feels loose, wiggly, or does not click shut when closed
- Broken, cracked, or missing door catch visible on the door or front panel
- Door repeatedly needs to be pushed or held closed to keep the dryer running
Replaces Part Numbers
This door catch directly replaces the following OEM and cross-reference part numbers:
W11429587, WPW10610880, W10529190, W10610880, W10696503, 4959535, AWP44536, EAP12745673, PD00071341, AP6983349, PS12745673.
W11429587 is the current updated part number superseding WPW10610880, W10610880, W10529190, W10696503, and W11224630. If your dryer's parts diagram shows any of these older numbers, the W11429587 is the correct current replacement.
Compatibility
This door catch is compatible with select dryers from the following brands:
- Whirlpool dryers (gas and electric)
- Maytag dryers (gas and electric)
- Amana dryers
- Kenmore / Sears dryers (select Whirlpool-built models)
- KitchenAid dryers
- Jenn-Air dryers
- Admiral dryers
- Roper dryers
- Inglis dryers
- Crosley dryers
- Magic Chef dryers
- Norge dryers
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
- Holds the dryer door firmly closed during operation so the door switch remains engaged and the dryer runs uninterrupted
- Snap-in installation — no screws, no tools required in most cases; installs in under 5 minutes
- Durable plastic construction — designed to withstand repeated opening and closing over the life of the dryer
- Current updated part number — directly supersedes WPW10610880, W10610880, W10529190, W10696503, and W11224630
- Sold individually — one door catch per order
- Compatible with 12 major appliance brands on the Whirlpool platform
- Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
| Part Number |
W11429587 |
| Also Replaces |
WPW10610880, W10610880, W10529190, W10696503, W11224630 |
| Part Type |
Dryer Door Catch (Door Latch Catch Clip) |
| Condition |
Aftermarket Replacement |
| Application |
Gas and Electric Dryers |
| Material |
Plastic |
| Color |
White |
| Installation |
Snap-in — no tools required in most cases |
| Sold As |
Single door catch |
| Compatible Brands |
Whirlpool, Maytag, Amana, Kenmore, KitchenAid, Jenn-Air, Admiral, Roper, Inglis, Crosley, Magic Chef, Norge |
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Open the dryer door and locate the old door catch — it is typically mounted in a rectangular slot on the inside of the door or on the dryer front panel near the door opening. Use a small flat-head screwdriver or your fingers to press the tabs on the old catch and pop it out of its mounting slot. Note the orientation of the old catch before removing it. Insert the new W11429587 catch into the slot in the same orientation and press firmly until it snaps into place. Close the dryer door to confirm it latches securely with a positive click. Restore power and run a short cycle to verify the door stays closed and the dryer operates normally. Tools needed: None in most cases; a small flat-head screwdriver may help with removal.
Frequently Asked Questions
What is the difference between W11429587, WPW10610880, and W10610880?
These are all part numbers for the same dryer door catch used across different Whirlpool-family production runs. W10610880 was the original number, WPW10610880 was an intermediate update, and W11429587 is the current manufacturer-approved part number. W10529190, W10696503, and W11224630 are also cross-referenced to this same catch. If your parts diagram shows any of these numbers, the W11429587 is the correct replacement to order.
Why won't my dryer start even though I'm closing the door?
If the door catch is broken or worn, the door may not be engaging the door switch firmly enough to signal the control board that the door is closed. Most dryers are designed not to run unless the door switch is fully activated. A new door catch restores the firm snap that fully depresses the door switch, allowing the dryer to start. If replacing the catch does not resolve the start issue, the door switch itself may also need to be checked.
Do I need to replace the door strike as well?
Not necessarily — in most cases only the door catch (the spring-clip part) needs replacement. The door strike (the post or tab on the opposite side that the catch snaps onto) is a separate and typically more durable part that rarely fails on its own. Inspect the door strike for cracks or breakage before ordering — if it is intact, just the W11429587 catch is all you need.
How many door catches does my dryer have?
Most Whirlpool-family dryers use a single door catch. This listing is for one catch. If your dryer door has two catch points, verify your model number with our support team to confirm whether one or two catches are needed before ordering.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic to match the dimensions and function of the original W11429587 door catch.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
