WE04X28977 Dryer Genuine Door Switch
The WE04X28977 is a genuine GE dryer door switch for GE and Hotpoint dryers, and also fits select Haier, Monogram, and Café models built on the GE platform. This small latch-style switch communicates with the control board when the door is fully closed, allowing the drying cycle to safely begin, and signals the control board to stop the cycle if the door is opened during operation.
White in color, measuring approximately 3"H x 2"W, weighing about 1 lb. Also known by the part number WE10X23879. Over time, this switch can become damaged from extended use or excessive force when closing the door. Symptoms of a failing door switch include the dryer failing to start, or the door not closing or latching properly. Replacing this switch requires a few basic tools and some slight disassembly of the dryer. It directly replaces WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948.
Quick Answer
The WE04X28977 Dryer Genuine Door Switch fixes GE, Hotpoint, Haier, Monogram, and Café dryers that won't start or have a door that won't close or latch properly. White, small latch style, ~3"H x 2"W, ~1 lb. Replaces WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948. This is a dryer part — it's sold individually and typically requires removing the front panel for access.
Common Problems This Part Fixes
Dryer won't start
Door won't close or latch properly
Dryer stops mid-cycle when the door is bumped or jostled
Switch damaged from excessive force when closing the door
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This dryer door switch directly replaces the following OEM and cross-reference part numbers:
WE04X28977, WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This door switch is compatible with select GE dryers, and also fits select Hotpoint, Haier, Monogram, and Café dryers built on the GE platform, including model numbers such as GTD42GASJ2WW, GTD45EASJ1WS, GTD45EASJ0WS, GTD45EASJ2WS, GTD42EASJ1WW, GTD42GASJ1WW, GTD72EBSN0WS, GTX22GASK0WW, GTD45GASJ2WS, GTD45GASJ1WS, GTX22EASK0WW, GTD42EASJ2WW, GTD42EASJ0WW, GTD42GASJ0WW, GTD72EBPN0DG, GTD45GASJ0WS, PTD60EBPR0DG, YTD74E2SN0WS, YTD74E2PN0DG, GTD84ECPN1DG, GTX52GASP0WB, PTD60GBSR0WS, GTD84GCPN0DG, VTD52EASR0WB, GTD84GCPN1DG, GTD84ECPN0DG, YTD74G2PN1DG, GTD84GCSN0WS, YTD74G2PN0DG, PTD60EBSR0WS, YTD74E2PN1DG, PTD60GBPR0DG, YTD74E2SN1WS, GTD84GCSN1WS, GTD65EBSJ4WS, VTD52GASR0WB, GTD84ECSN0WS, YTD74G2SN0WS, GTD84ECSN1WS, YTD74G2SN1WS, GTX52EASP0WB, HTX24GASK0WW, HTX24GASK0WS, HTX21EASK0WW, HTX21PASK0WW, HTX24EASK0WS, HTX24EASK0WW, HTX21GASK0WW, GTX65EBSJ2WS, GTD75ECPL0DG, GTD75GCPL0DG, GTD65GBSJ4WS, GTX42GASJ1WW, GTX65GBSJ2WS, GTD33PASK0WW, GTX33EASK0WW, GTX33GASK0WW, GTX60EBSJ0WS, GTD65EBSJ0WS, GTD65EBSJ3WS, GTX42EASJ1WW, 5TX62E9ST0WS, 5TX62E9ST1WS, 5TX62G9ST0WS, and ETD48EASW0WB.
Note: This is a dryer part, sold individually. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified switch design
Small latch-style door switch — communicates door status to the control board
Resolves "won't start" and "door won't close" symptoms caused by switch failure
White, approximately 3"H x 2"W, about 1 lb
Also known as WE10X23879
Direct drop-in replacement matching the original mounting
Replaces WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948
Compatible with GE, Hotpoint, Haier, Monogram, and Café dryers
Genuine OEM replacement — guaranteed fit, materials, and performance
Sold individually
Product Specifications
Part Number
WE04X28977
Also Known As
WE10X23879
Part Type
Dryer Door Switch (Small Latch Style)
Condition
Genuine OEM
Brand
GE
Color
White
Height
Approx. 3"
Width
Approx. 2"
Weight
Approx. 1 lb
Repair Difficulty
Easy to Moderate — front panel removal required
Quantity
1 door switch (sold individually)
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Dryer Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Turn the two screws located at the bottom corners of the front panel counter-clockwise until they come out, then slide the panel up and off the dryer to access the door switch. Locate the wires connected to the old door switch and disconnect them, noting their positions. Remove the mounting screws or clips securing the old switch and pull it free. Install the new WE04X28977 in the same position, reconnect the wires to their original positions, and secure the mounting hardware. Slide the front panel back into place and secure the two bottom corner screws. Restore power and test that the dryer starts normally with the door closed, and stops if the door is opened during a cycle. Tools needed: screwdriver, wrench, pliers.
Frequently Asked Questions
My dryer won't start. Is this the part I need?
Yes, this is one of the most common symptoms of a failed door switch. Since this switch tells the control board whether the door is closed, a damaged or malfunctioning switch can prevent the dryer from starting even when the door is fully shut.
My dryer door won't close properly. Could this be the same part?
Yes, a damaged door switch — often from excessive force when closing the door over time — can cause the door to not latch or close correctly, in addition to preventing the dryer from starting.
Is this a difficult repair?
It's a straightforward repair for a confident DIYer, requiring a screwdriver, wrench, and pliers, along with some slight disassembly of the dryer's front panel to access the switch.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original switch design and mounting configuration of the door switch originally installed in your dryer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
W11210459 Genuine OEM Whirlpool Washer Water Inlet Valve
The W11210459 is a genuine Whirlpool OEM water inlet valve for Whirlpool top-load washers, and also fits select Kenmore, Maytag, Amana, Crosley, Inglis, and Roper models. This valve controls the flow of hot and cold water into the tub during the fill portion of each cycle — an electrical solenoid opens and closes the valve to admit exactly the right amount of water for the selected wash setting.
Over time, mineral or sediment buildup inside the valve, or general wear in the solenoid coil, can cause the valve to fail. A failing valve typically shows up as the washer not filling with water, filling very slowly, or water continuing to leak into the tub after the wash has completed. It directly replaces AP6329217, W10701459, W10838319, W11038711, 4591321, PS12349267, W10869799, W11025984, and W11210459VP.
Quick Answer
The W11210459 Genuine OEM Whirlpool Washer Water Inlet Valve fixes Whirlpool, Kenmore, Maytag, Amana, Crosley, Inglis, and Roper top-load washers that won't fill, fill very slowly, or continue leaking water into the tub after the wash has finished. Replaces AP6329217, W10701459, W10838319, W11038711, 4591321, PS12349267, W10869799, W11025984, W11210459VP. The control panel can be removed more easily with a putty knife slid under each end to release the clips, rather than removing the back panel first.
Common Problems This Part Fixes
Washer not filling with water
Washer filling very slowly
Water continuing to leak into the tub after the wash cycle has completed
No hot water reaching the tub, or no cold water reaching the tub
Cycle stalling at the fill step and never advancing to wash
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11210459, W10701459, W10838319, W11038711, 4591321, W10869799, W11025984, 33190189, 33190190, W10423122, W10423124, W10868380, W10868381, AP6329217, AWP43369, EAP12349267, OEM18987660, PD00042885, PS12349267
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select Whirlpool top-load washers, and also fits select Kenmore, Maytag, Amana, Crosley, Inglis, and Roper washers built on the Whirlpool platform, including model numbers such as WTW5000DW1 and WTW4816FW2.
Note — not the same as W11210463: A similarly-numbered valve, W11210463 (also cross-referenced as W11101906), is a separate part with its own cross-reference set (W10701461, W10883458, W10869803, W11038696, AP6329219), used on other Whirlpool washer models. The two are easy to confuse given how close the numbers are — always confirm you have the exact part number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine Whirlpool OEM part — factory-specified solenoid design and flow rate
Regulates hot and cold water flow into the washer tub
Resolves "won't fill," "fills slowly," and "leaks after cycle completes" symptoms caused by valve failure
Factory Certified Part built to Whirlpool's engineering specifications
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP6329217, W10701459, W10838319, W11038711, 4591321, PS12349267, W10869799, W11025984, and W11210459VP
Compatible with Whirlpool, Kenmore, Maytag, Amana, Crosley, Inglis, and Roper top-load washers
Genuine OEM replacement — guaranteed fit, materials, and performance
Moderate DIY repair
Product Specifications
Part Number
W11210459
Part Type
Washer Water Inlet Valve
Condition
Genuine OEM
Brand
Whirlpool
Application
Top-Load Washers
Function
Controls hot and cold water flow into the tub
Repair Difficulty
Moderate
Quantity
1 valve
Compatible Brands
Whirlpool, Kenmore, Maytag, Amana, Crosley, Inglis, Roper
Installation Notes
⚠️ Unplug Washer And Shut Off Water Supply Before Starting — Use A Putty Knife To Release The Control Panel Disconnect power at the outlet, or shut off the house circuit breaker for the appliance, and shut off both hot and cold water supplies before beginning. Wear work gloves. The top control panel can be removed more easily by sliding a putty knife under the panel on each end to release the retaining clips, rather than removing the back panel first — one customer specifically noted this trick saved considerable time after trying the back-panel approach without success. With the panel released, locate the water inlet valve and photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the hot/cold water lines from the old valve, remove its mounting screws, and pull it free. Install the new W11210459 in the same position, reconnect the water lines and electrical connector fully, and secure the mounting screws. Reinstall the control panel. Restore the water supply and power, then run a full test cycle across a few temperature settings to confirm correct fill behavior with no leaking. Tools needed: multi-screwdriver, putty knife, work gloves.
Frequently Asked Questions
My washer isn't filling with water. Is this the right part?
Yes, this is the most direct symptom of a failed water inlet valve. Since this valve is what admits water from your household supply into the washer, a solenoid failure or internal blockage can prevent any water from entering at all, stopping the wash cycle from proceeding.
What's the easiest way to access the control panel for this repair?
Try sliding a putty knife under the panel at each end to release the retaining clips, rather than removing the back panel of the washer first. One customer specifically learned this trick after trying the back-panel approach with no luck, then found the putty knife method worked cleanly after watching an online tutorial.
Is this the same as W11210463?
No, these are two separate Whirlpool valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by Whirlpool to factory specifications — guaranteed fit, materials, and performance. It matches the original solenoid design, flow rate, and connection type of the water inlet valve originally installed in your washer.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WH03X32217 Washer Motor Pulley
The WH03X32217 is a genuine OEM 1/2 HP motor pulley and nut from GE for GE, Hotpoint, Kenmore, and RCA washers. The pulley mounts on the motor shaft and carries the drive belt that transfers the motor's power to the drum, and the nut secures it to the shaft. A pulley that cracks, wears, or strips its threads can slip on the shaft, squeal, or stop driving the belt, so the drum turns poorly or not at all.
This is a genuine OEM part, not an aftermarket equivalent, so the fit and the shaft connection match the original. This pulley is for the 1/2 HP motor. Washers with the smaller 1/3 HP motor use a different pulley, so match the part before you order.
Quick Answer
The Genuine OEM WH03X32217 Motor Pulley and Nut fixes a GE-built washer whose 1/2 HP motor pulley is cracked, worn, or has stripped threads, causing a loud squeal, belt slipping, or a drum that won't turn. Genuine OEM from GE Appliances. Classic symptom: the motor runs but the drum turns weakly or not at all, often with a squealing or slipping noise.
Common Problems This Part Fixes
Loud squealing from the motor and belt area
Drum not turning, or turning weakly, while the motor runs
Cracked, worn, or damaged plastic pulley
Stripped pulley threads or a pulley loose on the motor shaft
Drive belt slipping or wearing quickly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This motor pulley and nut replaces the following part numbers:
WH03X32217 replaces WH49X25377, WH07X24182, AGE25958, AP7018598, PD00069997, PS16554753
These are GE's earlier numbers for the 1/2 HP motor pulley and nut. If your old pulley or parts diagram shows either, match against this list.
Compatibility
This motor pulley is listed for washers from:
GE
Hotpoint
Kenmore (GE-built)
RCA
Note: This pulley is for washers with a 1/2 HP motor. Washers with a 1/3 HP motor, such as those using WH03X32218 or WH07X24695, use a different pulley. No model list is published for this part, so confirm fit by matching the number on your old pulley or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order.
Key Features
Genuine OEM GE motor pulley and nut, not an aftermarket equivalent
For washers with a 1/2 HP motor
Mounts on the motor shaft to carry the drive belt to the drum
Restores a secure belt drive and eliminates pulley slipping and squeal
Simple replacement, typically 15–60 minutes with hand tools
Product Specifications
Part Number
WH03X32217
OEM Part Number
WH03X32217
Part Type
Washer Motor Pulley and Nut
Condition
Genuine OEM
Manufacturer
GE Appliances
Motor Size
1/2 HP
Application
Select GE, Hotpoint, Kenmore & RCA Washers
Installation Notes
⚠️ Unplug Power Before Installing Unplug the washer and turn off the water supply before starting. Following your model's service guide, remove the panel needed to reach the motor and drive belt. Release the belt from the old pulley, then remove the nut holding the pulley to the motor shaft and take the pulley off. Fit the new pulley on the shaft, secure it with the nut, and refit the belt. Check that the belt sits correctly and is not worn, since a worn belt or transmission pulley can cause the same symptoms. Replace the panel, restore power and water, and run a short cycle to confirm the drum turns smoothly. Common tools are pliers, screwdrivers, and a socket set.
Frequently Asked Questions
My washer squeals and the drum won't turn. Is this the part I need?
It can be. A cracked or worn motor pulley can slip and squeal. Inspect the pulley for cracks, wear, or damaged threads, and check the belt and transmission pulley at the same time, since they can fail together.
Is this the right pulley for a 1/2 HP or a 1/3 HP motor?
This one is for the 1/2 HP motor. Washers with a 1/3 HP motor use a different pulley, so check your parts diagram or contact our support team with your model number.
Does it come with the nut?
GE lists this part as a motor pulley and nut. Contact us if you need to confirm what's in the package for your order.
Is this a genuine GE part?
Yes. This is a genuine OEM part from GE Appliances, not an aftermarket equivalent.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W11130359 Washer Suspension Rod Kit – Compatible with Whirlpool, Maytag, Amana, Crosley, and Roper Washers
Product Description
Reduce vibration and restore smooth, stable operation with the XPARTCO W11130359 Washer Suspension Rod Kit. This high-quality aftermarket replacement supports the washer tub and absorbs movement during wash and spin cycles. Worn or broken suspension rods can cause loud banging noises, excessive shaking, or unbalanced loads. Replacing them with this reliable XPARTCO kit ensures balanced performance and extends the life of your washer.
Replaces Part Numbers
W11130359, W11027215, 4813873, W10594082, W10785954, W10821704, W10901060, W11033536, W11226784, AP6261901, PD00042502, EAP12347544, PS12347544.
Compatibility
This replacement suspension rod kit fits select Whirlpool, Maytag, Amana, Crosley, and Roper top-load washers.
Example compatible models include (but are not limited to): Whirlpool WTW5000DW1, Maytag MVWC565FW0, and Amana NTW4516FW3.
Always verify your washer’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Built to match OEM performance and stability
🌀 Reduces Vibration – Keeps washer tub balanced during spin cycles
💰 Cost-Effective Solution – High-quality kit at a lower cost than OEM parts
🛠️ Complete Kit – Includes four suspension rods, bushings, and suspension springs
🛡️ Fixes Common Issues – Solves excessive shaking, banging, or unbalanced load problems
📐 Product Specification
Part Number: W11130359
Component Type: Washer Suspension Rod Kit
Includes: 4 suspension rods with springs and mounting bushings
Material: Heavy-duty steel with corrosion-resistant coating
Mounting: Direct-fit installation under washer tub
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, pliers, socket wrench
⚠️ Safety First: Always unplug the washer before performing repairs to prevent electrical shock or injury.
Steps:
Disconnect power and remove the washer lid or top panel.
Support the washer tub with a sturdy object or strap.
Remove the old suspension rods from their mounting holes.
Install the new XPARTCO W11130359 rods one by one, attaching springs and bushings.
Reassemble panels, plug in the washer, and run a test cycle to confirm smooth operation.
⏱️ Time Required: 30–40 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Eliminate noise and vibration — Add to Cart Now for a stable, long-lasting repair!
Genuine OEM DC97-15459G Washer Water Inlet Valve
The Genuine OEM Samsung DC97-15459G is the 5-way water inlet valve assembly for select Samsung washers. The solenoid-operated valve controls the flow of hot and cold water into the washer. When it clogs or fails, the washer may fill slowly or not at all, or it may leak.
This is the original Samsung part, not an aftermarket equivalent. It is sold individually and does not include wire harnesses or securing screws. Check your model number before ordering, because Samsung sells similar valves with different suffixes.
Quick Answer
The Genuine OEM DC97-15459G Water Inlet Valve replaces the inlet valve on a compatible Samsung washer when it has failed. Classic symptoms: the washer won't fill or fills slowly, has low water pressure, or leaks.
Common Problems This Part Fixes
Washer not filling with water, or filling slowly
Low water pressure in the washer
Leaking from the valve
Washer struggling to start a cycle because of a clogged or faulty valve
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water inlet valve is listed under the following part number:
DC97-15459G replaces 3276197, AP5623056, ASM1220342, EAP4220861, PD00007887, PS4220861
If your old valve shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This water inlet valve is listed for Samsung washers, including these examples:
Samsung WA45H7200AW, WA45H7200AP, WA48H7400AW, WA48H7400AP
Samsung WA50F9A7DSW, WA50K8600AV, WA52J8700AP, WA52M7750AV
Samsung WA54M8750AV, WA56H9000AP, WA456DRHDSU
Note: The models above are a sample of the roughly 40 that retailers list, not a full list. Samsung also sells similar valves under other part numbers, such as DC97-15459D and DC97-15459H. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM Samsung part, not an aftermarket equivalent
5-way solenoid valve that controls hot and cold water into the washer
Sold individually, without wire harnesses or securing screws
Product Specifications
Part Number
DC97-15459G
OEM Part Number
DC97-15459G
Part Type
Washer Water Inlet Valve (5-Way Solenoid)
Condition
Genuine OEM
Manufacturer
Samsung
Quantity
1 Valve
Application
Select Samsung Washers
Installation Notes
⚠️ Disconnect Power And Water Before Installing Unplug the washer and turn off the water supply before you begin, and wear work gloves. Pull the washer out from the wall and drain the hoses into a bucket. Detach the hot and cold hoses, remove the screws holding the valve bracket, and disconnect the wires from the valve's five terminals, noting where each goes. Fit the new valve, reconnect the wires and hoses (hand-tighten, then add about two-thirds of a turn with pliers), turn the water on and check for leaks, then plug in the washer and run a test cycle.
Frequently Asked Questions
My washer won't fill or fills slowly. Is this the part I need?
It can be. Check that both water supplies are on and the hose screens are clear first, since a blockage causes the same symptom. If those are fine, the inlet valve may be clogged or faulty.
Is this an OEM or aftermarket part?
This is a genuine OEM part from Samsung, not an aftermarket equivalent.
Does it include the wiring and screws?
No. The valve is sold individually, so reuse the wire connectors, hoses and screws from your old valve.
Will this fit my washer?
It is listed for about 40 Samsung models, but the model list above is only a sample, and similar valves with other suffixes exist. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO W10195840 Dishwasher Dishwasher Adjuster Position Clip
Fits Specific Whirlpool, Maytag Dishwasher Models
Replaces Part Numbers: WPW10195840, W10195840, W10418323, 1872228, AP6016800, PS11750093.
Description: This Dishwasher Adjuster Position is a replacement part for specific Maytag, Kenmore, Whirlpool dishwasher models. It plays a vital role in adjusting the height of the upper rack, allowing for flexible loading options and accommodating larger items when necessary.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO W10780048 Washer Suspension Rods Kit
Washer Suspension Rods Kit, set of 4.
Fits specific Kenmore, Maytag, Whirlpool top load machine models.
Replaces Part numbers: W10780048, W10349191, 4185114, W10257087, W10257088, W10349193, W10748952, W10821948, AP5971398, PS11703290.
Description: This Suspension Rods are replacement parts for specific Kenmore, Maytag, Whirlpool washing machine models. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.
This is an aftermarket part that can be used as a replacement for the OEM part.
Genuine GE OEM Part
GE WD24X25325 Dishwasher Genuine Fan Vent Assembly
Genuine GE door-vent blower/fan assembly for select GE and Haier dishwashers.
Product Overview
The GE WD24X25325 Dishwasher Fan Vent Assembly is a genuine OEM replacement used in the dishwasher door ventilation system.
The blower circulates air through the door vent during the drying portion of the cycle to help reduce retained moisture and improve drying performance.
Quick Answer
WD24X25325 is a Genuine GE OEM dishwasher door-vent blower/fan motor assembly. It is used on select GE and Haier dishwashers and helps move moist air through the door vent during drying.
Common Problems This Part May Fix
Poor drying performance
Excess moisture remaining after a cycle
Door vent fan does not run
Unusual noise from the vent/blower area
Moist air is not being exhausted through the door vent
Replaces and Cross-References
WD24X25325, 265D2664G005, U40G12BS3A5-51, AGE25072, AP6972063, EAP12726435, PD00073154, PS12726435.
Cross-reference numbers are supplied for identification. Always verify the complete dishwasher model number before ordering.
Compatibility
Fits select GE and Haier dishwashers. Compatible model examples include:
CDT800P2N0S1
CDT805P2N0S1
CDT845P2N3S1
DDT700SBN0TS
GDF645SSN0SS
GDT645SFN3DS
GDT665SFN0DS
GDP665SYN3FS
PDT715SYN2FS
PDT715SFN0DS
PDP715SYN3FS
QDP555SYN0FS
Important: This is only a partial compatibility list. Confirm the exact dishwasher model number before purchase because similar models may use a different vent or blower assembly.
Key Features
Genuine GE Appliances OEM part
Complete door-vent blower/fan assembly
Circulates air through the dishwasher door vent
Helps reduce moisture during drying
For select GE and Haier dishwashers
Product Specifications
Manufacturer
GE Appliances
Manufacturer Part Number
WD24X25325
Part Type
Dishwasher Fan Vent / Door Vent Blower Assembly
Condition
New
Part Quality
Genuine OEM
Application
Dishwasher Door Ventilation / Drying System
Approx. Shipping Weight
0.5 lb
Installation Notes
Disconnect electrical power to the dishwasher at the breaker before service.
Access the door vent assembly according to the appliance service procedure.
Disconnect the wiring connector carefully before removing the old fan assembly.
Transfer or reuse any hardware only as directed for the specific model.
Confirm the vent path is clear and the new assembly is fully seated before reassembly.
Diagnostic note: Poor drying can also result from rinse-aid settings, heating-system faults, blocked vent passages, or control issues. Confirm the fan assembly is defective before replacing it.
Frequently Asked Questions
Is WD24X25325 a Genuine GE OEM part?
Yes. GE Appliances identifies WD24X25325 as a genuine replacement fan vent assembly.
What does this fan assembly do?
It circulates air through the dishwasher door vent to help reduce moisture during the drying stage.
Does it fit every GE dishwasher?
No. It fits specific GE and Haier models. Verify the complete model number before ordering.
Is this only the fan motor?
This listing is for the complete WD24X25325 fan vent / door-vent blower assembly as supplied by GE.
Shop With Confidence
Use your dishwasher's complete model number to confirm fitment before purchase.
Genuine GE OEMFan Vent AssemblyModel Verification RecommendedFast U.S. Shipping
XPARTCO W11210459 Washer Water Inlet Valve
The XPARTCO W11210459 is an aftermarket replacement washer water inlet valve assembly compatible with select Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, and Roper top-load washers in the WTW4xxx, WTW5xxx, MVWC4xx, MVWC5xx, NTW, and related series. The water inlet valve is a solenoid-operated valve mounted on the back of the washer that controls the flow of water from the household supply lines into the washer tub. When the control board calls for water during a fill or rinse cycle, it energizes the valve's solenoid coil to open the valve and allow water to flow in. When the correct water level is reached, the solenoid de-energizes and the valve closes.
When the water inlet valve fails, the washer may not fill with water at all, fill too slowly, fill with an incorrect temperature, overfill, or drip water into the tub when it should be closed. This valve assembly directly replaces W10701459, W10838319, W10869799, W11025984, W11038711, W11210459VP, AP6329217, and PS12349267. Installs in 15–20 minutes with basic hand tools.
Quick Answer
The XPARTCO W11210459 Washer Water Inlet Valve fixes Whirlpool-family top-load washers that won't fill, fill slowly, fill with the wrong water temperature, overfill, or drip water into the tub between cycles. Compatible with Whirlpool WTW4xxx/WTW5xxx, Maytag MVWC4xx/MVWC5xx, Kenmore, Amana NTW, Crosley, Inglis, and Roper top-load washers. Replaces W10701459, W10838319, W10869799, W11025984, W11038711, AP6329217, PS12349267.
Common Problems This Part Fixes
Washer not filling with water at all when a cycle is started
Washer filling very slowly — taking much longer than normal to reach the correct water level
Washer filling with only cold water on a warm or hot cycle — or only hot on a cold cycle
Washer overfilling or filling continuously — valve stuck open
Water dripping or trickling into the tub when the washer is not running
Water leaking from the back of the washer near the valve body
Washer not advancing past the fill portion of the cycle
Replaces Part Numbers
This water inlet valve directly replaces the following OEM and cross-reference part numbers:
W11210459, W10701459, W10838319, W11038711, 4591321, W10869799, W11025984, 33190189, 33190190, W10423122, W10423124, AWP43369, PD00042885, EAP12349267, AP6329217, PS12349267.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water inlet valve is compatible with select top-load washers from the following brands and series:
Whirlpool top-load washers — WTW4616, WTW4715, WTW4810, WTW4815, WTW4816, WTW4850, WTW4855, WTW4915, WTW4950, WTW4955, WTW5000 series and related models
Maytag top-load washers — MVWC215, MVWC415, MVWC416, MVWC465, MVWC555 series and related models
Kenmore / Sears top-load washers — 110 series (Whirlpool-built models)
Amana top-load washers — NTW4516, NTW4655 series and related models
Crosley top-load washers (select models)
Inglis top-load washers (select models)
Roper top-load washers (select models)
Note: Always verify your exact model number before ordering. The W11210459 is a specific-fit valve — not universal. Contact our support team if you need confirmation before ordering.
Key Features
Solenoid-operated valve — opens and closes on command from the control board to deliver the correct amount of hot and cold water during wash and rinse cycles
Complete valve assembly — direct plug-in replacement for compatible models
Resolves not-filling, slow-filling, wrong-temperature, overfill, and drip-when-off symptoms
Replaces W10701459, W10838319, W10869799, W11025984, W11038711, and AP6329217
Compatible with Whirlpool WTW4xxx/WTW5xxx, Maytag MVWC series, Amana NTW series, Kenmore 110 series, Crosley, Inglis, and Roper top-load washers
Top-load washer application — not for Whirlpool front-load models
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in 15–20 minutes with basic hand tools
Product Specifications
Part Number
W11210459
Part Type
Washer Water Inlet Valve Assembly
Condition
Aftermarket Replacement
Application
Top-Load Washers
Valve Type
Solenoid-operated water inlet valve
Compatible Series
WTW4xxx, WTW5xxx, MVWC4xx, MVWC5xx, NTW, Kenmore 110
Compatible Brands
Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper
Installation Notes
⚠️ Unplug Washer and Shut Off Water Before Starting Disconnect power and turn off both the hot and cold water supply valves before beginning. Pull the washer away from the wall to access the back panel. The water inlet valve is mounted on the upper rear of the washer — the external supply hoses connect to the inlet ports and internal hoses route water into the tub. Photograph all wire harness connections and hose routing before disconnecting anything. Use pliers to loosen the hose clamps and disconnect the internal hoses. Unscrew the mounting screws holding the valve to the washer cabinet and disconnect the wire harness. Remove the old valve and install the new W11210459 in the same position. Reconnect the wire harness, internal hoses with clamps, and mounting screws. Reconnect the external supply hoses, restore water and power, then run a fill cycle and check for leaks. Tools needed: Phillips screwdriver, pliers.
Frequently Asked Questions
What is the difference between the W11210459 and the W10683603 water inlet valves?
Both are Whirlpool-platform top-load washer water inlet valves, but they are different assemblies for different model generations and are not interchangeable. The W10683603 (WPW10683603) is a larger dual-valve assembly with an integrated thermistor and vacuum break, used on older Whirlpool-family top-load models. The W11210459 is a newer valve assembly used on more recent Whirlpool WTW4xxx/WTW5xxx and Maytag MVWC series top-load washers. Always use your specific model number to confirm which valve is correct for your washer before ordering.
How do I know if the water inlet valve has failed?
Common signs of a failed water inlet valve are the washer not filling with water, filling very slowly, filling only on one temperature setting, overfilling, or water dripping into the tub when the washer is off. You can test the valve's solenoid coils with a multimeter — each coil should show a resistance reading (typically 200–500 ohms) rather than open circuit. A coil reading open circuit has failed. Before testing the valve, check that the household water supply is fully open, the fill hoses are not kinked, and the inlet screens inside the valve ports are not clogged with mineral deposits.
What are the small screens inside the valve inlet ports for?
The small mesh screens inside the hot and cold water inlet ports of the valve are sediment filters that prevent mineral deposits and debris from the household water supply from reaching the valve seats and solenoid mechanisms. Over time — especially in areas with hard water — these screens can become clogged with mineral buildup and restrict water flow, causing the same slow-fill symptoms as a failed valve. Before replacing the valve, remove and inspect the inlet screens. If they are clogged, clean them with a soft brush and white vinegar or replace them. If cleaning the screens does not restore normal fill speed, the valve itself needs replacement.
My washer fills with only cold water — is the water inlet valve the cause?
Filling with only cold water when a warm or hot cycle is selected usually points to the hot water solenoid coil having failed. Each solenoid controls one temperature port independently — a failed hot coil means only the cold port opens. Test both solenoid coils with a multimeter as described above. Also check that your household hot water supply valve is fully open and that hot water is reaching the back of the washer in the supply hose before assuming the valve has failed.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the specifications and performance of the original W11210459 water inlet valve assembly.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
Genuine OEM WE03X23875 Dryer Drum Bearing Support - Compatible with GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel Dryers
Product Description
Keep your dryer running smoothly with the Genuine OEM WE03X23875 Dryer Drum Bearing Support from Parts-O-Matic. This authentic GE front drum support assembly, designed for GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel dryers, secures the drum at the front, ensuring smooth rotation during the drying cycle. Made of durable gray plastic, it includes bearings and a light fixture, addressing issues like squeaking, grinding noises, loose drum movement, or reduced drying efficiency caused by wear or damage. Note: Includes one front drum support assembly with bearings and light. Clean lint and debris from the drum and front panel before installation. Take photos of component placement during disassembly.
Replaces part numbers: WE03X23875, EAP11767002, PD00050010, AP6037232, 4587455, PS11767002.
Compatibility:
Compatible with models including but not limited to:
GE: GTD65EBSJ1WS, GTD65GBSJ0WS, GTD72GBPNDG, GTD84GCSNWS, GTD42EASJ0WW, GTDP490ED7WS
Hotpoint: HTDX100EM8WW, HTDP120ED6WW
RCA: RTD42EASJ0WW
Kenmore: 2661532210, 36361532412
Fisher & Paykel: DG70FA1-96975, DE60FA-US1-96987
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select GE, Hotpoint, RCA, Kenmore, and Fisher & Paykel dryer models.
🔥 Specifications: OEM front drum support assembly, gray plastic, includes bearings and light fixture, designed for smooth drum rotation and durability.
💰 Genuine OEM Quality: Authentic GE part ensures perfect fit and reliable performance.
🛠️ Easy Installation: Requires a Phillips screwdriver, nut driver, work gloves; typically installed in 30–60 minutes.
🛡️ Reliable Fixes: Resolves squeaking or grinding noises, loose or sagging drum, reduced drying efficiency, or unusual noises when opening/closing the door.
Installation Notes:
Safety First: Unplug the dryer from the power source before installation.
Shop Parts-O-Matic for high-quality OEM appliance parts with a 30-day return policy. Keep your dryer running smoothly and efficiently today!
Add to cart now for a reliable OEM fix!
