Search results for "refrigerator switch"

XPARTCO W10124096 Refrigerator Condenser Fan Motor The XPARTCO W10124096 is an aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators, including Kenmore, Maytag, KitchenAid, Amana, and Jenn-Air models. The condenser fan motor pulls air across the condenser coils to carry heat away from the refrigerant. When the motor wears out or fails, the refrigerator may run warmer than normal, cool poorly, or make unusual noise. The kit includes the fan motor, a fan blade, and a jumper wire harness for installations where the original motor used a 3-pin connector. It replaces many earlier Whirlpool motor numbers, so the new kit may look different from your original motor. This is the condenser fan, near the compressor, not the evaporator fan inside the freezer or fresh food compartment. Quick Answer The XPARTCO W10124096 Condenser Fan Motor Kit fixes a Whirlpool-built refrigerator that runs warm, cools poorly, or makes noise because the condenser fan motor has failed. Kit includes the motor, fan blade, and jumper harness. Classic symptom: the compressor area is noisy, or the condenser fan doesn't spin while the compressor runs. Common Problems This Part Fixes Refrigerator running warmer than usual or cooling poorly Noisy refrigerator near the compressor Condenser fan not running Worn or damaged condenser fan motor or blade Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This condenser fan motor kit directly replaces the following part numbers: W10124096, 1378525, 2188538, 2188727, 2188728, 2188729, 2188732, 2188891, 2206005, 2315538, 2315558, W10124096VP, W10130108, W10204250, W10509333, W10861645, AH1957416, AP4318657, AWP40429, EA1957416, EAP1957416, PD00002509, PS1957416 These numbers span several generations of Whirlpool's own part numbering for this motor. Confirm against your refrigerator's parts diagram, or contact our support team, if your model calls out a different number. Compatibility This condenser fan motor kit is listed for Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Crosley, Estate, Inglis, and Jenn-Air refrigerators, including these examples: Models ED5FHAXSB03, 8ET1FTKXKT05, GI15NDXTB0, 7GD27DIXHB00 Models 10644022600, 10653254200, BRS62ABANA00, MSD2658KES02 Note: The models above are a small sample of a list of hundreds, not a full list. Some retailer lists include drawer and bin models, so verify fit with your full model number. Contact our support team to confirm fit before ordering. Key Features Aftermarket replacement condenser fan motor kit for Whirlpool-built refrigerators Kit includes the fan motor, fan blade, and a jumper wire harness for 3-pin connectors Moves air across the condenser coils to help the refrigerator cool Resolves warm-running and noise problems caused by a failed motor Replaces 13 earlier Whirlpool part numbers Product Specifications Part Number XPW10124096 OEM Part Number W10124096 Part Type Refrigerator Condenser Fan Motor Kit Condition Aftermarket Replacement Kit Includes Fan Motor, Fan Blade, Jumper Wire Harness Application Whirlpool, Kenmore, Maytag, KitchenAid, Amana & Jenn-Air Refrigerators Installation Notes ⚠️ Unplug Power Before Installing Unplug the refrigerator before beginning, and move perishable food to a cooler or another refrigerator. Wear work gloves. Follow your model's service guide to reach the condenser fan, which is near the compressor. Note how the wiring is connected, disconnect it, and remove the old motor and blade. Fit the new motor and blade in the same position and reconnect the wiring. Use the supplied jumper harness only if your original motor used a 3-pin connector. Restore power and check that the fan runs. Frequently Asked Questions My refrigerator is running warm. Is this the part I need? A failed condenser fan motor is one possible cause, since the condenser can't shed heat without airflow. Check that the condenser coils are clean and that the fan turns freely. If the fan doesn't run or the motor is noisy or worn, this kit is the repair. Is this the condenser fan or the evaporator fan? This is the condenser fan motor, which cools the condenser coils near the compressor. The evaporator fan is a different part located inside the cabinet. Check your parts diagram if you are unsure. When do I use the jumper wire harness? The kit includes a jumper harness for installations where the original motor used a 3-pin connector. If your original connector is different, compare it to the new motor, or contact our support team. Will this fit my refrigerator? It is listed for hundreds of Whirlpool-built refrigerators, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

V-151-1C25 Micro Limit Switch Contact Type: SPDT 1NO 1NC Actuator Type: Short Hinge Lever Rating: 15A 125 250VAC Lever Length: 15mm / 0.6" Rating: 15A,1/2HP, 125 250VAC; 0.6A,125VDC; 0.3A, 250VDC   IMPORTANT! You should call ahead to confirm availability of an item before going to the store. store's actual inventory can change from minute to minute. Calling the store will allow you to confirm that the item is still available. Some items may not be immediately available for pickup at your local store. Prices and availability may differ from web prices at local pickup location.

Read more less

XPARTCO EXP570 Dryer Door Latch Kit The XPARTCO EXP570 is an aftermarket replacement door catch and strike kit for dryers from Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis, LG, and other comparable brands. The catch and strike work as a pair: the strike on the dryer door engages the catch on the cabinet to hold the door shut for the whole cycle. When either part wears, cracks, or gets knocked out of alignment, the door stops latching reliably. It may not stay closed, it may pop open mid-cycle and let heat escape, or the dryer may refuse to start because it doesn't register the door as closed. Each kit includes 1 door catch and 1 strike, so you can replace the full latch set in one repair rather than guessing which half is worn. Because this latch design was used across several appliance families, the kit carries a long cross-reference list covering Whirlpool, Frigidaire, GE, LG, and Alliance-built part numbers; see the Replaces list below. Quick Answer The XPARTCO EXP570 Dryer Door Latch Kit fixes a dryer door that won't stay closed, opens mid-cycle, or an open-door condition that keeps the dryer from starting, caused by a worn or damaged catch and strike. Each kit includes 1 door catch and 1 strike. Fits Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis, and LG dryers. Classic symptom: the door swings open on its own, or you have to hold it shut to get the dryer to run. Common Problems This Part Fixes Dryer door won't stay closed Door pops open in the middle of a cycle Dryer won't start because the open-door condition isn't clearing Worn, cracked, or damaged catch or strike Heat escaping around the door, leaving clothes damp Door that no longer latches with a firm, positive click Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door latch kit directly replaces the following part numbers: 5366021400, 5303207102, AP2153772, PS475419, AP2137890, PS455020, LA-1003, LA1003, PS2162263, AP4242465, WE1M1011, WE1X1192, WE1M536, WE1X1195, WE01X1158, WE01X10023, WE01X10188, WE01X10184, AP5324728, PS3502777, AP2042206, PS266893, AP5324728, PS3502777, AP2042209, PS266896, AP2042175, PS266861, AP2042031, PS264343, AP3775568, PS959860, AP5238145, PS959856, WE1X1194, PS266895, AP2042208, WE1M1011, WE1X1192, WE1M536, WE1X1195, WE01X1158, WE01X10023, WE01X10188, WE01X10184, AP5324728, PS3502777, AP2042206, PS266893, AP5324728, PS3502777, AP2042209, PS266896, AP2042175, PS266861, AP2042031, PS264343, AP3775568, PS959860, AP5238145, PS959856, 4027EL2001A, 4026EL3001A, PS3522845, AP5238145, AP5242421, PS3522822, 00491624, AP3735937, PS959856, 5366021400, 5303207102, AP2153772, PS475419, AP2137890, PS455020, 279570. This latch kit was sold under the part numbers of several manufacturers: Whirlpool and Maytag (279570), Frigidaire and Electrolux (5303207102), GE (WE01X10023 and related), LG (4027EL2001A, 4026EL3001A), and Alliance-built dryers (LA-1003). The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical parts. Compatibility This latch kit is used on dryer models from the following brands: Whirlpool, Kenmore (Whirlpool-built), Maytag, Amana, Roper, Estate, and Inglis dryers Frigidaire, Electrolux, and Kenmore (Frigidaire-built) dryers GE and Hotpoint dryers Select LG and Kenmore (LG-built) dryers Select Crosley, Norge, and Speed Queen dryers Note: This kit fits specific models within each brand, not every dryer a brand has made, and the latch design differs between manufacturers. Match the number on your old catch and strike, or on your dryer's parts diagram, against the Replaces list above rather than relying on brand alone. Contact our support team with your model number and we'll verify fit before you order. If only the catch needs replacing, see our single EXP571 Dryer Door Catch. Key Features Aftermarket replacement dryer door latch kit with 1 door catch and 1 strike Replaces both halves of the latch in one repair Restores a secure door closure so heat stays in and the dryer runs efficiently Resolves doors that won't stay shut, open mid-cycle, or trigger an open-door no-start Cross-references to Whirlpool, Frigidaire, GE, LG, and Alliance OEM numbering 1 kit per order Product Specifications Part Number EXP570 OEM Part Number 279570, 5303207102, WE01X10023, 4027EL2001A Part Type Dryer Door Latch Kit (Door Catch & Strike) Condition Aftermarket Replacement Kit Contents 1 Door Catch & 1 Strike Quantity 1 Kit Application Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis & LG Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning. Open the door and inspect the old catch on the cabinet and the strike on the door for cracks, wear, or loose mounting. Remove the old catch and strike, keeping track of how each one is oriented and mounted. Fit the new catch and strike in the same positions and fasten them securely. Close the door and confirm it latches with a firm click, stays shut, and lines up evenly with the cabinet. If the door still won't seat properly after the swap, check the door hinges and alignment, since a misaligned door can wear out new latch parts quickly. Frequently Asked Questions My dryer door won't stay shut — is this the part I need? Very likely. A worn or damaged catch or strike is a common reason a dryer door won't latch or pops open mid-cycle. Inspect both parts for cracks or wear. Because the two work as a pair, replacing both at once is the surest fix. My dryer won't start and seems to think the door is open. Could this be the cause? It can be. If the door isn't latching fully, the dryer may not register it as closed. If the latch looks fine and the door closes firmly but the dryer still won't start, the door switch may be the problem instead. What's included in the kit? Each kit includes 1 door catch and 1 strike. If you only need the catch, we also offer it separately as the EXP571 Dryer Door Catch. Will this fit my Whirlpool, Frigidaire, GE, or LG dryer? This kit is cross-referenced to part numbers from all of those brands, but it fits specific models rather than every dryer. Match the number on your old latch parts or parts diagram against the Replaces list, or contact our support team with your model number and we'll confirm before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

W10335056 Washer Genuine OEM Water Level Switch Pressure Switch Replaces Part Numbers: W10335056, 1617123, 3366846, AH3408073, EA3408073, AP4566382, PS3408073, W10335056VP.  Description: This Pressure Switch is a Genuine OEM part for specific Whirlpool washing machine models. This part ensures your machine fills with the correct amount of water for the selected cycle, preventing overfilling or insufficient water levels that can lead to suboptimal washing results.    A faulty Pressure Switch can result from several issues, including clogging with detergent residue or debris, wear and tear from regular use, or electrical malfunctions affecting its responsiveness.     California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO W10464673 Refrigerator Evaporator Fan Motor Replaces WPW10464673 The XPARTCO W10464673 is an aftermarket replacement refrigerator evaporator fan motor compatible with select Whirlpool, KitchenAid, Maytag, Kenmore, and Ikea bottom-freezer and French door refrigerators. The evaporator fan motor is located inside the freezer compartment and circulates cold air from the evaporator coils throughout both the freezer and fresh food sections. Without the evaporator fan running, cold air cannot be distributed — even if the compressor and evaporator are working correctly, both compartments will gradually warm up. A failed evaporator fan motor is one of the most common causes of a refrigerator that runs but does not cool. Rated 115V, 60Hz with a 2-pin connector, this motor features a 14mm shaft length, 3mm shaft diameter, and approximately 13cm (5.1") of wire lead. It is constructed from ABS plastic housing with a metal motor core. It directly replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and EAP11755167. Compatible models include KitchenAid KFFS and KRFF series, Maytag MFB and MFF series, and several Kenmore 106/596-series models. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO W10464673 Refrigerator Evaporator Fan Motor fixes refrigerators where both compartments are too warm, the refrigerator runs but doesn't cool, or there is unusual noise from inside the freezer. 115V/60Hz, 2-pin connector, 14mm shaft, 3mm shaft diameter, 13cm leads. ABS/metal construction. Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Whirlpool, and Kenmore 106/596-series. Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167. Common Problems This Part Fixes Both refrigerator and freezer compartments too warm — evaporator fan not circulating cold air Refrigerator running continuously but not cooling — compressor on but no air circulation Freezer section cold but fresh food section warm — fan not moving air between compartments Unusual buzzing, squealing, or grinding noise coming from inside the freezer No airflow felt inside the refrigerator or freezer when the compressor is running Fan blade visible inside the freezer but not spinning when the compressor runs Ice buildup on the evaporator coils causing the fan blade to stop Replaces Part Numbers This evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WPW10464673, W10464673, 3020513, AWP50481, EAP11755167, PD00030978, AP6021839, PS11755167, FDQC16WP2A. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select refrigerators from the following brands and series: KitchenAid refrigerators — KFFS20 and KRFF300 series (KFFS20EYMS02, KFFS20EYBL02, KFFS20EYBL04, KRFF300EBL00, KRFF300EBS00 and related models) Maytag refrigerators — MFB2055 and MFF2055 series (MFB2055YEB01, MFB2055YEB02, MFB2055YEM01, MFB2055YEM02, MFB2055YEW02, MFF2055DRE00, MFF2055YEB02, MFF2055YEW00, MFW2055FRH00, MFB2055FRW00 and related models) Whirlpool refrigerators (select bottom-freezer and French door models) Kenmore / Sears refrigerators — 106 series and 596 series (10673002510, 10673002511, 10673003510, 10673003511, 59673002510, 59673003510, 59673003511, 59673009510, 10679472411, 10679473411 and related models) Ikea refrigerators (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Circulates cold air from the evaporator coils throughout the freezer and fresh food compartments — essential for maintaining set temperatures in both sections 115V, 60Hz — correct electrical specifications for compatible models 2-pin connector — direct plug-in replacement on compatible models Shaft: 14mm length, 3mm diameter — matches original motor shaft dimensions for fan blade compatibility Wire lead length: approximately 13cm (5.1 inches) ABS plastic housing with metal motor core — durable and designed for continuous freezer-temperature operation Replaces WPW10464673, 3020513, AP6021839, PS7320664, PS11755167, and FDQC16WP2A Compatible with KitchenAid KFFS/KRFF, Maytag MFB/MFF, Kenmore 106/596, Whirlpool, and Ikea refrigerators Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Part Number W10464673 OEM Part Number WPW10464673 Part Type Refrigerator Evaporator Fan Motor Condition Aftermarket Replacement Application Bottom-Freezer and French Door Refrigerators Voltage 115V AC Frequency 60 Hz Connector 2-pin plug Shaft Length 14mm (0.55 inches) Shaft Diameter 3mm (0.12 inches) Wire Lead Length Approximately 13cm (5.1 inches) Material ABS plastic housing / Metal motor core Compatible Brands Whirlpool, KitchenAid, Maytag, Kenmore, Ikea Installation Notes ⚠️ Unplug Refrigerator and Shut Off Water Before Starting Unplug the refrigerator and shut off the water supply before beginning. Remove all food and shelving from the freezer compartment. On most compatible models, the evaporator fan is located behind the freezer back panel. Remove the screws securing the freezer back panel and carefully slide it out to expose the evaporator coils and fan assembly. If ice has built up on the fan or coils, use a hair dryer to melt it before attempting to remove the fan — do not force a frozen fan free. Disconnect the 2-pin wire connector from the old motor. Remove the fan blade by pulling it straight off the motor shaft, then unscrew the motor mounting brackets and remove the old motor. Install the new W10464673 motor in the same position, secure the mounting brackets, press the fan blade back onto the shaft, and reconnect the 2-pin connector. Reinstall the freezer back panel, restore power and water, and verify the fan runs when the compressor starts. Tools needed: Phillips screwdriver, hair dryer (if coils are iced), work gloves. Frequently Asked Questions What does the evaporator fan motor do? The evaporator fan motor drives a fan blade inside the freezer compartment that draws air across the evaporator coils — the cold coils remove heat from the air, and the fan distributes the chilled air throughout both the freezer and fresh food sections via a duct system. Without the evaporator fan running, the evaporator coils still get cold and the compressor still runs, but no cold air is circulated. This causes both compartments to gradually warm up even though the refrigeration system itself may be functioning correctly. A failed evaporator fan motor is one of the most common and most frequently misdiagnosed causes of poor refrigerator cooling. How do I know if the evaporator fan motor has failed? Open the freezer door and press the door switch (the small button or tab that tells the refrigerator the door is closed) — this should start the evaporator fan if the compressor is running. If you hear no fan noise and feel no airflow from inside the freezer with the compressor running, the fan motor has likely failed. You can also remove the freezer back panel and physically check whether the fan blade spins freely by hand — if it is stuck or wobbles, inspect for ice buildup or a seized motor bearing. If the blade spins freely but the motor does not run when powered, the motor has burned out. What is the difference between W10464673 and WPW10464673? These are the same evaporator fan motor. WPW10464673 is the updated Whirlpool OEM part number that superseded the original W10464673. The 3020513 is also a cross-reference for this same motor. This aftermarket replacement is compatible with all of these numbers. My freezer is cold but my fridge is warm — could it be the evaporator fan? Yes — this is a classic evaporator fan failure symptom. When the fan motor fails partially, the freezer may still receive some cold air passively from the evaporator, but not enough air is circulated to reach the fresh food section through the duct system. A failed evaporator fan is frequently the cause of this hot-fridge-cold-freezer pattern. Check the fan as described above — if it is not spinning, replacing the W10464673 motor will restore cooling to both compartments. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from ABS plastic and metal to match the electrical specifications and shaft dimensions of the original W10464673 evaporator fan motor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

MSWF Refrigerator Water Filter Description: This water filter is designed to remove impurities from the water and ice dispensed by your refrigerator, providing clean and fresh-tasting water. It effectively reduces contaminants such as chlorine, lead, mercury, and other particulates, ensuring safe drinking water for you and your family.  You should replace this water filter if it becomes clogged or reaches the end of its usable life, typically every six months. Causes of a bad water filter can include normal usage leading to clogging, the accumulation of sediments and impurities over time, or damage to the filter casing. Failing to replace the filter regularly can also compromise its effectiveness. Replaces Part Number: 1262070, AH1559689, EA1559689, MSWF3PK, WR02X12345, WR02X12801, WR02X13618, AP3997949, PS1559689.    California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

809069201 Refrigerator Genuine OEM Evaporator Fan Motor Fits specific Frigidaire, Electrolux refrigerator models. Description: This Evaporator Fan Motor is an OEM part for specific Frigidaire refrigerator models. It circulates air over the evaporator coils and throughout the refrigerator and freezer compartments, ensuring even cooling and maintaining the desired temperatures. Replaces Part Numbers:809069206, 809069201, AP7014188, PS16544514. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

4975JA2028A Refrigerator Drawer Slide Rail Refrigerator drawer rail guide assembly Can be used on right-hand or left-hand side of drawer. Allows the drawer to operate smoothly  Fits specific LG, Kenmore refrigerator Models. Replaces Part Numbers: 4975JA2028A,  AH3524806, EA3524806, AP4442249, PS3524806. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov  

Read more less

Genuine Refrigerator Installation Part WX08X10015 Refrigerator Genuine SmartConnect Water Supply Line (15 Feet) Genuine 15-foot SmartConnect water supply line for compatible refrigerators and icemaker connections. Product Overview The WX08X10015 Refrigerator SmartConnect Water Supply Line is a genuine 15-foot refrigerator water line designed for compatible refrigerator and icemaker installations. It connects the household water supply to the refrigerator water inlet system. Use this line for a new installation or to replace a leaking, kinked, damaged, or deteriorated refrigerator water supply line. Quick Answer WX08X10015 is a genuine 15-foot refrigerator SmartConnect water supply line for compatible refrigerator and icemaker installations. Common Problems This Part May Fix Leaking refrigerator water supply line Kinked or restricted water tubing Damaged or deteriorated supply line Insufficient line length for refrigerator placement Water line replacement during refrigerator installation Replaces and Cross-References WX08X10015, 880515, AGE1244675, AP3140389, EAP311504, PD00065821, PS311504, TJ915PEX, IMKR15 Part number is provided for identification. This listing is for a genuine replacement and installation part. Compatibility Designed for compatible refrigerators and icemaker installations requiring SmartConnect water supply line part number WX08X10015. Important: Verify the refrigerator installation requirements, connection type, available space, and required line length before ordering. Key Features Genuine replacement and installation part 15-foot refrigerator water supply line Designed for compatible refrigerator and icemaker hookups Provides additional installation length for flexible placement Direct replacement for applications calling for WX08X10015 Product Specifications Part Number WX08X10015 Part Type Refrigerator Water Supply Line Product Line SmartConnect Length 15 Feet Application Compatible Refrigerators / Icemakers Condition New Part Quality Genuine Replacement Part Package Quantity 1 Water Supply Line Installation & Troubleshooting Notes Shut off the household water supply before installation. Disconnect refrigerator power if access to electrical components is required. Inspect the existing connection points for corrosion, damage, or leaks. Route the new supply line without sharp bends, pinching, or kinks. Secure the line to the household supply and refrigerator inlet according to the appliance installation instructions. Restore the water supply slowly and inspect all connections carefully for leaks. Installation tip: Leave enough slack behind the refrigerator so the appliance can be moved for service without pulling or stressing the water line. Frequently Asked Questions How long is WX08X10015? This SmartConnect water supply line is 15 feet long. What is WX08X10015 used for? It connects a compatible refrigerator or icemaker water inlet system to the household water supply. Is WX08X10015 a genuine part? Yes. This listing is for a genuine refrigerator water supply line. Will this work with every refrigerator? No. Verify the refrigerator installation requirements and connection specifications before ordering. Shop With Confidence Verify your refrigerator installation requirements before purchasing. Our compatibility team can help confirm whether WX08X10015 is suitable for your application. Genuine Replacement15-Foot Water LineInstallation SupportFast U.S. Shipping

Read more less

WR60X10318 Genuine OEM GE Refrigerator Evaporator Fan Motor The WR60X10318 is a genuine GE OEM evaporator fan motor assembly used in side-by-side refrigerators, complete with an integrated 2-wire thermistor built right into its 6-pin wiring harness. This motor draws air across the evaporator coil and circulates it through both the fresh food and freezer compartments, while the built-in thermistor reports temperature back to the control board so it can regulate cooling accurately. Because the thermistor and fan motor arrive as a single assembly, a fault in either function shows up together, and replacing this one part addresses both. The harness and plug measure approximately 13-7/8" in length. Common failure causes include worn motor bearings that eventually seize the shaft entirely, debris or ice buildup around the fan blade, and general electrical wear over time. On this side-by-side platform, a classic failure sequence is a bearing that starts out noisy, then progressively worsens until the motor freezes up completely — once the fan stops moving air, the evaporator coil often ices over heavily since moisture keeps accumulating with nowhere for the resulting cold air to go. Symptoms include unusual noise from the freezer, inconsistent or warm temperatures in either compartment, visible frost buildup on the coil, and a refrigerator that runs continuously trying to compensate. It directly replaces AP4981643, PS3487992, EAP3487992, and 1812462. Quick Answer The WR60X10318 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE side-by-side refrigerators with unusual noise from the freezer, warm or inconsistent temperatures, frost or ice buildup on the evaporator coil, or a refrigerator running constantly. Complete assembly with integrated 2-wire thermistor on a 6-pin, 13-7/8" harness. Replaces AP4981643, PS3487992, EAP3487992, 1812462. Not the same part as our WR60X10307 or WR60X10185 listings — those are separate motors for different GE refrigerator platforms. Common Problems This Part Fixes Unusual noise — grinding, buzzing, or humming — coming from the freezer compartment Inconsistent or warm temperatures in the fresh food or freezer compartment, or both Visible frost or ice buildup on the evaporator coil Refrigerator running continuously as it struggles to maintain temperature Fan motor bearing noise that has progressively worsened, sometimes ending in the motor seizing entirely Freezer icing over heavily while temperatures in both compartments climb Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers: WR60X10318, AP4981643, AGE29310, OEM14944938, PD00023381, PS3487992, EAP3487992, 1812462 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This evaporator fan motor is compatible with select GE side-by-side refrigerators, and also fits select Hotpoint, Haier, Monogram, Café, and Kenmore refrigerators built on the GE platform. In rare instances, this part is also referenced for compatibility with some LG models. Note: GE uses several different evaporator fan motors across its refrigerator lineup. This WR60X10318 assembly is a separate part from our WR60X10307 and WR60X10185 listings, which serve different model platforms and have their own distinct cross-reference numbers. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs. Key Features Genuine GE OEM part — factory-specified motor, blade, and integrated thermistor design Complete assembly — includes the fan motor plus a 2-wire thermistor built into the 6-pin harness Resolves "unusual noise from the freezer," "warm or inconsistent temperatures," "frost or ice buildup," and "runs continuously" symptoms caused by fan motor failure Approximately 13-7/8" harness and plug length Direct drop-in replacement matching the original mounting and blade fitment Replaces AP4981643, PS3487992, EAP3487992, and 1812462 Genuine OEM replacement — guaranteed fit, materials, and performance DIY-friendly repair, though side-by-side units can have tight working clearance around the fan Product Specifications Part Number WR60X10318 Part Type Refrigerator Evaporator Fan Motor Assembly (with Thermistor) Condition Genuine OEM Brand GE Application Side-by-Side Refrigerators Integrated Component 2-wire thermistor built into the wiring harness Harness Connector 6-pin Harness/Plug Length Approx. 13-7/8 in. Production Numbers 197D4964G011, FDQT26GE7 Quantity 1 fan motor assembly Compatible Brands GE, Hotpoint, Haier, Monogram, Café, Kenmore Installation Notes ⚠️ Unplug Refrigerator Before Starting — Side-by-Side Units May Have Tight Clearance Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. On side-by-side models, access can be tight: you may need to remove the rear interior panel, the ice maker, and a fan cover to reach the motor, so budget extra time and patience compared to a simpler platform. If the evaporator coil is heavily iced over, let the unit sit unplugged with the door open for several hours, or run a manual defrost, before continuing — ice can make the old motor difficult to remove cleanly and may be masking the actual point of failure. Photograph the 6-pin wiring harness connector and the fan blade's orientation before disconnecting anything. Remove the mounting screws holding the fan assembly in place, unplug the wiring harness connector, and slide the old assembly out of its housing. Slide the new WR60X10318 assembly into the same housing, secure it with the mounting screws, and reconnect the harness connector fully. Confirm the blade spins freely by hand without contacting the housing before reassembling the fan cover, ice maker, and rear panel. Restore power, open the door to test the fan, and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, 1/4" and 5/16" nut drivers, work gloves, and a headlamp or flashlight for visibility in tight spaces. Frequently Asked Questions My freezer is heavily iced over and both compartments are warm. Is this the fan motor? Yes, this is a very common failure sequence on this platform. Once the evaporator fan motor's bearings wear out and the motor slows or seizes, air stops circulating away from the coil, moisture keeps condensing on it, and ice builds up heavily. Once that happens, both the freezer and fresh food compartments typically lose cooling together, since neither is getting circulated cold air anymore. Thawing the ice and confirming the fan motor doesn't spin freely by hand will confirm this diagnosis. Does this include the thermistor, or do I need to buy that separately? It's included. This assembly ships with a 2-wire thermistor built directly into the 6-pin wiring harness, so you don't need to source or install a separate thermistor component — replacing this one part addresses both the fan motor and the thermistor together. Why is access so tight on my side-by-side refrigerator? Side-by-side refrigerators tend to pack components more tightly than French door or top-freezer models, and this evaporator fan often sits behind the ice maker and a dedicated fan cover in addition to the rear interior panel. Removing all of these takes more time than a simpler platform, but the fan motor itself installs the same straightforward way once you have access — a headlamp or flashlight helps considerably in the tighter space. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It includes the same motor design, fan blade, integrated thermistor, and 6-pin harness configuration as the evaporator fan motor assembly originally installed in your side-by-side refrigerator. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 5304512529 Microwave Door Switch – Compatible with Frigidaire, Electrolux, and Kenmore Microwaves Product Description Ensure safe and reliable operation with the XPARTCO 5304512529 Microwave Door Switch. This high-quality aftermarket replacement detects when the microwave door is closed, allowing the appliance to run safely. A faulty switch can cause the microwave not to start, stop mid-cycle, or operate with the door open — a serious safety concern. Replacing it with this durable XPARTCO switch restores proper interlock function and dependable performance. Replaces Part Numbers 5304512529, 4584691, PD00051808, EAP12365114, AP6278576, PS12365114. Compatibility This replacement door switch fits select Frigidaire, Electrolux, and Kenmore microwave models. Example compatible models include (but are not limited to): Frigidaire FFMV1645TS, Electrolux E30MO75HPS, and Kenmore 790.80353310. Always verify your microwave’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Designed to meet OEM safety and performance standards ⚡ Restores Safe Operation – Ensures microwave only operates when the door is securely closed 💰 Budget-Friendly Fix – High-quality alternative to expensive OEM replacements 🛠️ Quick Installation – Direct-fit replacement; installs easily with basic tools 🛡️ Fixes Common Issues – Solves no-start, mid-cycle shutdowns, or unsafe door operation 📐 Product Specification Part Number: 5304512529 Component Type: Microwave Door Interlock Switch Material: Heat-resistant plastic housing with copper terminals Mounting: Snap-in bracket installation Operating Conditions: Designed for high-voltage microwave circuits Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver ⚠️ Safety First: Always unplug the microwave before servicing. Microwave capacitors can retain dangerous voltage even when unplugged — use extreme caution or contact a qualified technician. Steps: Disconnect power and remove the microwave cover. Locate the door latch assembly containing the switches. Disconnect wiring connectors and remove the old switch. Install the new XPARTCO 5304512529 door switch into the same slot. Reconnect wiring, reassemble the cover, and test door operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Protect your microwave’s performance and safety — Add to Cart Now for a reliable, budget-friendly replacement!

Read more less

EAU63923601 Refrigerator Condenser Fan Motor - Compatible with LG, Haier, Kenmore/Sears Refrigerators Product Description Keep your refrigerator cool and efficient with the replacement EAU63923601 Refrigerator Condenser Fan Motor from Parts-O-Matic. This high-quality motor, designed for LG, Haier, and Kenmore/Sears refrigerators, circulates air across the condenser coil to dissipate heat, ensuring optimal cooling performance. Made with durable ABS plastic and metal components (DC 12V, 1A, 4-wire 4-pin), this motor addresses issues like overheating, noisy operation, poor cooling, or fan failure. Note: Includes one condenser fan motor. Disconnect power before installation. Take photos of wiring during disassembly for accurate replacement. Replaces part numbers: EAU63923601, ODM-001F-4A, LFXS26596S, 4877337, AP6317195, PS12383669, EAP12383669, PD00046601, EAU63923604 Compatibility: Compatible with models including but not limited to: LG: LFXS28968S, LFXS28968S/00, LMXS28626S, LMXS28626S/00, LFXS26596S, LRMDS3006S, LMWS27626S, LRFVS3006D Haier: Select models requiring EAU63923601 or compatible condenser fan motors Kenmore/Sears: Select models requiring EAU63923601 or compatible condenser fan motors Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select LG, Haier, and Kenmore/Sears refrigerator models. 🔥 Specifications: replacement condenser fan motor, DC 12V, 1A, 4-wire 4-pin connector, shaft length 46mm, shaft diameter 3mm, line length 72cm (28.34in), ABS plastic/metal construction, 3.15" x 3.15" x 2.76", 5.29 oz. 💰 Cost-Effective Alternative: replacement motor offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, flathead screwdriver, work gloves; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves issues like refrigerator overheating, excessive noise, poor cooling, or fan failure. Installation Notes: Safety First: Disconnect the refrigerator from the power source before installation. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Restore your refrigerator’s cooling efficiency today! Add to cart now for a budget-friendly fix!

Read more less