AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly
The AEB73764520 is a genuine LG OEM fan grille assembly for LG refrigerators. This grille sits around the evaporator fan, holding and directing the air the fan pushes so cold air is guided evenly throughout the refrigerator and freezer compartments rather than dispersing unevenly right at the fan. It also serves a protective role, shielding the spinning fan blade from accidental contact while still allowing full, unrestricted airflow through its vents.
Made of durable plastic, this grille can crack, warp, or break over time from the cold temperature cycling inside the freezer compartment, or from accidental impact during cleaning or organizing frozen food. A damaged grille typically shows up as uneven cooling or airflow within the compartment, since air isn't being properly guided and distributed, or in cases of significant damage, a fan blade that's no longer adequately shielded. Because parts that look similar can have small but meaningful differences in size and shape, it's important to confirm this exact part number matches your refrigerator before ordering, rather than relying on general appearance.
Quick Answer
The AEB73764520 Genuine OEM LG Refrigerator Fan Grille Assembly fixes LG refrigerators with a cracked, warped, or broken fan grille causing uneven cooling or airflow, or where the fan is no longer properly shielded. Genuine LG replacement part. Parts that look similar can have small but meaningful size and shape differences — always verify your exact model number before ordering.
Common Problems This Part Fixes
Uneven cooling or airflow within the refrigerator or freezer compartment
Visible cracks, warping, or breakage in the grille around the evaporator fan
Fan blade no longer adequately shielded due to grille damage
Grille that has come loose or won't seat securely in place
Reduced airflow efficiency affecting overall cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
AEB73764520, 4952727, ALG53451, AP6873098, EAP12714296, PS12714296, PD00069980.
We were not able to confirm additional cross-reference or superseding part numbers for this specific part from reliable sources at the time this page was built, so none are listed here rather than guessed. If you have a cross-reference number for your appliance, contact our support team and we will verify compatibility before you order.
Compatibility
This fan grille assembly is compatible with select LG refrigerators, including French door and Door-in-Door smart refrigerator models such as LFXS26973S, LFXS26596S, and LFXS28596S.
Note: Parts that appear similar can have small but important differences in size and shape between LG refrigerator platforms. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified fit and airflow design
Holds and guides air from the evaporator fan for even, consistent cold air distribution
Resolves "uneven cooling," "poor airflow," and "cracked or broken grille" symptoms
Also shields the fan blade from accidental contact
Durable plastic construction
Direct drop-in replacement matching the original mounting
Compatible with select LG French door and Door-in-Door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
AEB73764520
Part Type
Refrigerator Fan Grille Assembly
Condition
Genuine OEM
Brand
LG
Location
Around the evaporator fan
Function
Guides evaporator fan airflow and shields the fan blade
Material
Plastic
Quantity
1 fan grille assembly
Compatible Brand
LG
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves to protect your hands. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator fan area where the grille is mounted. Photograph the grille's orientation and any mounting clips or screws before removing it. Carefully remove the old grille from around the fan, taking care not to contact the fan blade itself. Install the new AEB73764520 grille in the same position, securing any clips or screws to hold it firmly in place. Reassemble the back panel, restore power, and monitor the refrigerator over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My cooling seems uneven, with some areas colder than others. Could this grille be the cause?
Yes, this is possible if the grille is cracked, warped, or has come loose. This grille's job is to guide the evaporator fan's airflow evenly throughout the compartment, so damage or misalignment can cause cold air to concentrate in some areas while other spots don't get adequate circulation.
Why does this part need to match my model so precisely?
Fan grille assemblies that look very similar at a glance can have small differences in size and shape between different LG refrigerator platforms, since the grille has to fit precisely around the specific fan and duct assembly used in your model. Ordering based on a general resemblance rather than confirming your exact model number risks a poor fit that doesn't seat or seal correctly.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original mounting and airflow design of the fan grille assembly originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 4681JB1029D Refrigerator Condenser Fan Motor – Compatible with LG and Kenmore Refrigerators
Product Description
Keep your refrigerator running efficiently with the XPARTCO 4681JB1029D Refrigerator Condenser Fan Motor. This Condenser Fan Motor is a replacement part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
Replaces Part Numbers
4681JB1029D, EAU61644104, 4681JB1029Q, 1267566, AH3523330, EA3523330, PD00008709, AP4437783, PS3523330.
Compatibility
This replacement condenser fan motor fits select LG and Kenmore refrigerators.
Example compatible models include (but are not limited to): LG LFX25974ST, LG LFX28968ST, and Kenmore 795.71053.010.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM performance for LG refrigerators
🌬️ Reliable Airflow – Circulates air over coils to prevent overheating and improve efficiency
💰 Cost-Effective Fix – Quality replacement at a lower cost than OEM parts
🛠️ DIY Installation – Plug-and-play wiring connector for easy setup
🛡️ Fixes Common Issues – Solves overheating, loud operation, or poor cooling problems
📐 Product Specification
Part Number: 4681JB1029D
Component Type: Refrigerator Condenser Fan Motor Assembly
Material: Metal motor housing with plastic fan blade
Mounting: Direct-fit on rear compressor compartment bracket
Operating Conditions: Designed for continuous operation in refrigerator environments
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Always unplug the refrigerator before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and pull refrigerator away from wall.
Remove the rear access panel to expose the condenser area.
Disconnect wiring harness and remove the old fan motor.
Mount the new 4681JB1029D motor using the same screws.
Reconnect the wiring harness and reinstall the rear panel.
Plug in the refrigerator and confirm proper fan operation.
⏱️ Time Required: 20–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your refrigerator cool and efficient — Add to Cart Now for a reliable, budget-friendly replacement!
W10515058 Refrigerator LED Light & Cover Replaces WPW10515058
The XPARTCO W10515058 is an aftermarket replacement LED light and flat lens cover assembly for Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators. This is the main light driver in a three-board lighting system used on many of these refrigerators — it not only illuminates its own location, but also supplies power to the other LED lights in both the refrigerator and freezer compartments. The companion boards in this same system use a tapered lens cover, sold separately as our W10515057 listing.
Measuring approximately 5" x 3", rated 120V, with a durable plastic lens and integrated LED circuit. Because this board supplies power to lights beyond its own location, a failure here can affect lighting throughout more of the refrigerator than just the spot where this assembly is mounted. Symptoms of a failing assembly include this light being dim, flickering, or not turning on, and in some cases, other lights elsewhere in the refrigerator or freezer being affected as well, since they depend on this board for power. It directly replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142.
Quick Answer
The W10515058 Refrigerator LED Light & Cover fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators with a dim, flickering, or non-working interior light — sometimes affecting lighting elsewhere in the fridge or freezer too, since this board supplies power to those lights as well. Flat lens cover, ~5" x 3", 120V. Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, 3021142. This is the flat-lens board that powers both the refrigerator and freezer lights — a different part from our W10515057 listing, which uses a tapered lens and is typically needed in pairs (2 tapered + 1 flat per refrigerator).
Common Problems This Part Fixes
Interior light dim or flickering
Interior light not turning on at all
Other lights elsewhere in the refrigerator or freezer also affected
All refrigerator lights strobing together when a door opens
Reduced visibility inside the refrigerator or freezer compartment
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator LED light and cover assembly directly replaces the following OEM and cross-reference part numbers:
WPW10515058, W10515058, W10465957, W10522611, AP6022534, AWP993990, EAP11755867, PD00030078, PS11755867
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light and cover assembly is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, KitchenAid, and Ikea refrigerators built on the Whirlpool platform, including model numbers such as:
WRS325FDAM02, WRS325FDAM04, WRS322FDAM04, WRS322FDAW04, WRS325FDAB02, WRS325FDAB06, WRS325FNAM, WRS335FDDM01
MSB27C2XAM00, MSB27C2XAW00, MSF22D4XAB00, MSF22D4XAB01, MSF22D4XAM00, MSF22D4XAM01, MSF22D4XAW00, MSF22D4XAW01
MSF25D4MDM00, MSF25D4MDM01, MSF25D4MDM02, MSF25D4XAW00, MSF25D4XAB00, MSF25D4XAM00
MSF21D4MDH00, MSF21D4MDH01, MSF21D4MDE00, MSF21D4MDE01, MSF21D4MDE02, MSF21D4MDM00, MSF21D4MDM01
MSF25D4MDE00, MSF25D4MDE01, MSF25D4MDE02, MSF25D4MDE03, MSF25D4MDH00, MSF25D4MDH01, MSF25D4MDH02, 8MSF25N4BW00, 8MSF25N4BW02
Kenmore 106.51132210, 106.51133213, 10651729410, 10641129210, 10641129211, 10641129212, 10641129213, 10651129210, 10651129211, 10651129212, 10651135610
Note — flat lens, not tapered, and typically needed alongside W10515057: This board uses a flat lens cover and serves as the light driver supplying power to the refrigerator and freezer lights. The companion boards in this same lighting system use a tapered lens cover, sold separately as our W10515057 listing — most of these refrigerators use 2 tapered-lens boards and 1 flat-lens board across the full lighting system. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which board your refrigerator needs.
Key Features
Aftermarket replacement LED light and flat lens cover assembly
Main light driver — supplies power to LED lights in both the refrigerator and freezer compartments
Resolves "dim or flickering light," "won't turn on," and "lights elsewhere also affected" symptoms
Approximately 5" x 3"
Rated 120V
Durable plastic lens with integrated LED circuit
Direct drop-in replacement matching the original mounting
Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10515058
OEM Part Number
WPW10515058
Part Type
Refrigerator LED Light & Flat Lens Cover Assembly
Condition
Aftermarket Replacement
Function
Illuminates its location and supplies power to refrigerator and freezer LED lights
Lens Type
Flat
Dimensions
Approx. 5" x 3"
Voltage
120V
Related Part
W10515057 (tapered lens, sold separately, typically 2 needed per system)
Repair Difficulty
Medium
Quantity
1 LED light and cover assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power to the refrigerator before beginning, and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Locate the flat-lens light assembly — this is the main driver board and may be positioned differently from the tapered-lens boards elsewhere in the same refrigerator. Use a flathead screwdriver to detach the front tabs and release the lens cover from the housing. Disconnect the wiring harness from the LED board. Remove the mounting screws or clips securing the old assembly and take it out. Install the new W10515058 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Snap the flat lens cover back into place. Restore power and confirm this light turns on normally, and check that lighting elsewhere in the refrigerator and freezer is also functioning correctly, since this board supplies their power. Tools needed: flathead screwdriver, work gloves.
Frequently Asked Questions
Why does replacing this one board sometimes fix lights in other parts of my refrigerator?
This board doesn't just light its own location — it also supplies power to the other LED lights in both the refrigerator and freezer compartments. If this board fails or malfunctions, it can affect lighting elsewhere in the unit even though the other light boards themselves are working fine. This is why some refrigerators show strange symptoms, like all the lights strobing together, when only this one board has actually failed.
Is this the same as your W10515057 listing?
No, these are different parts in the same lighting system. This W10515058 uses a flat lens cover and serves as the main power driver, while our W10515057 listing uses a tapered lens and is typically needed in pairs elsewhere in the same refrigerator. Most of these refrigerators use 2 tapered-lens boards (W10515057) and 1 flat-lens board (this W10515058) altogether.
Is this a difficult repair?
It's rated as a medium-difficulty repair — straightforward for a confident DIYer with a flathead screwdriver, but slightly more involved than the simplest appliance fixes since it involves detaching cover tabs and working with the wiring harness behind the lens.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the LED module, flat lens cover design, and mounting configuration of the original WPW10515058 assembly used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
MJU62070602 Genuine LG OEM Refrigerator Water Line
Plastic tube, 5/16" - 79 inches in length
Replaces Part Number: MJU62070602, 5210JA3004R, 5210JA3004U, MJU62070606, 2676818, 5210JA3004B, 5210JA3029U, AH3536013, EA3536013, MJU62070601, MJU62070611, MJU62070615, AP4681126, PS3536013.
Water tubing MJU62070602 is an original equipment manufacturer (OEM) part that fits some Kenmore, Kenmore Elite and LG refrigerators. Water tubing MJU62070602 supplies water to refrigerator components that require water such as the ice maker and water dispenser. Replaces original refrigerator water tubing part numbers 5210JA3004U, 5210JA3029U, MJU62070601 and MJU62070606. Fits some Kenmore and Kenmore Elite 795-series refrigerators. Also fits some LG refrigerators in these series: LFD, LFX, LMX, LRFD, LRSC and LSC.
5304524953 Genuine OEM Frigidaire Refrigerator Defrost Heater Assembly
The 5304524953 is a Genuine OEM Frigidaire/Electrolux replacement defrost heater assembly compatible with select Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, and Kenmore Frigidaire-built refrigerators and upright freezers — including the popular Frigidaire Professional 19 cu. ft. single-door models in the FPRU19F8 and FPFU19F8 series. The defrost heater is mounted near the evaporator coils and periodically activates during the dishwasher's defrost cycle to melt frost buildup that accumulates on the coils. Without functioning defrost, frost continues to build up on the evaporator until it blocks airflow — causing the refrigerator or freezer to lose cooling efficiency, run continuously, and ultimately fail to maintain set temperatures.
As a Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications, the 5304524953 directly replaces 5304523833, AP6997296, PS16227227, and 4975045. Tip: when replacing the defrost heater, it's a good time to also inspect or replace the paired defrost thermostat and defrost timer/control board — these three components form the defrost system and often fail in sequence. Addressing them together saves a future repair. Installs in 30–45 minutes with basic hand tools.
Quick Answer
The 5304524953 Genuine OEM Frigidaire Refrigerator Defrost Heater Assembly fixes Frigidaire and related-brand refrigerators and upright freezers with excessive frost or ice buildup on the evaporator coils, freezer or fresh food section too warm, refrigerator running continuously, or food spoiling faster than normal. Genuine OEM. Replaces 5304523833, AP6997296, PS16227227, 4975045. Compatible with Frigidaire Professional FPRU19F8WF0/WF2/WF3/WF4/WF5 and FPFU19F8WF2/WF4/WF5 series, plus Crosley, Electrolux, Gibson, Kelvinator, Tappan, Westinghouse, and Kenmore Frigidaire-built models. Often paired with defrost thermostat replacement.
Common Problems This Part Fixes
Excessive frost or ice buildup on the evaporator coils
Freezer section too warm — evaporator coils iced over and blocking airflow
Refrigerator section too warm — cold air not circulating because coils are frosted
Refrigerator/freezer running continuously without reaching set temperature
Food spoiling faster than normal due to inadequate cooling
Visible ice sheet on the rear interior wall of the freezer compartment
Defrost heater visibly burned through, broken, or showing arcing damage
Multimeter continuity test on the heater shows an open circuit (no continuity)
Replaces Part Numbers
This defrost heater assembly directly replaces the following OEM and cross-reference part numbers:
5304524953, 5304523833, 140223390018, 4975045, AFR19119, AP6997296, EAP16227227, PD00083605, PS16227227.
5304524953 is the current production part superseding 5304523833. Contact our support team with your model number if you need confirmation before ordering.
Compatibility
This defrost heater assembly is compatible with select refrigerators and upright freezers from the following brands:
Frigidaire Professional refrigerators — FPRU19F8WF0, FPRU19F8WF2, FPRU19F8WF3, FPRU19F8WF4, FPRU19F8WF5 series (19 cu. ft. single-door)
Frigidaire Professional upright freezers — FPFU19F8WF2, FPFU19F8WF4, FPFU19F8WF5 series
Frigidaire refrigerators — FPRU19F7WF0 and related FPRU/FPFU series models
Electrolux refrigerators and freezers — select Frigidaire-platform models
Crosley refrigerators (select Frigidaire-built models)
Gibson refrigerators (select models)
Kelvinator refrigerators (select models)
Tappan refrigerators (select models)
Westinghouse refrigerators (select models)
Kenmore / Sears refrigerators (select Frigidaire-built models)
White-Westinghouse refrigerators (select models)
Always verify your appliance model number before ordering. Contact our support team if you're unsure.
Key Features
Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications — guaranteed fit and performance
Defrost heater assembly — periodically melts frost buildup on the evaporator coils to maintain proper airflow and cooling efficiency
Direct factory-original replacement — no modifications required
Current production part — directly supersedes 5304523833
Replaces AP6997296, PS16227227, and 4975045 (plus 5304523833)
Compatible with Frigidaire Professional FPRU19F8 and FPFU19F8 series, plus Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, White-Westinghouse, and Kenmore Frigidaire-built refrigerators and upright freezers
Often replaced together with the defrost thermostat and defrost timer/control board as a paired defrost-system repair
DIY repair — installs in 30–45 minutes with basic hand tools
Product Specifications
Part Number
5304524953
Supersedes
5304523833
Part Type
Refrigerator/Freezer Defrost Heater Assembly
Condition
Genuine OEM
Application
Refrigerators and Upright Freezers (Frigidaire/Electrolux platform)
Location
Mounted near the evaporator coils
Approximate Weight
1.60 lbs
Often Paired With
Defrost Thermostat, Defrost Timer/Control Board
Compatible Brands
Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, White-Westinghouse, Kenmore
Installation Notes
⚠️ Unplug Refrigerator and Move Perishable Food Before Starting — Don't Touch Heater with Bare Hands Unplug the refrigerator and safely store any food that could spoil while the power is off. Wear work gloves and safety glasses to protect your hands and eyes. Handle the new heater only by its mounting brackets or end terminals — do NOT touch the heating element directly with bare fingers; skin oils can cause hot spots and shorten the heater's life. The defrost heater is mounted near the evaporator coils, behind the rear interior access panel of the freezer compartment. Remove all freezer shelves, drawers, and the ice maker (if equipped) to clear access. If there's a heavy ice sheet covering the back wall, allow the freezer to thaw completely or carefully manually defrost the coils before continuing — never break ice off the coils, as this damages the aluminum fins. Once the area is clear, remove the screws securing the rear access panel and lift it away to expose the evaporator coils and the defrost heater. Photograph the wire connections and heater orientation before disconnecting. Disconnect the wire harness connectors from the old heater, release the heater from its mounting clips or brackets, and lift it out. Install the new 5304524953 heater in the same position, ensuring it's properly seated in the mounting brackets, and reconnect the wire harness. While the panel is open, inspect the defrost thermostat for damage — if it's brittle, discolored, or shows visible defects, this is the ideal time to replace it as well. Reinstall the rear access panel, shelves, drawers, and ice maker. Plug the refrigerator back in and allow several hours for the unit to return to its set temperature before reloading with food. Tools needed: Phillips screwdriver, 1/4" nut driver, work gloves, safety glasses.
Frequently Asked Questions
How do I know if the defrost heater has failed?
The most reliable sign is heavy frost or ice buildup on the evaporator coils behind the freezer back panel — when the heater can't melt the frost as designed, ice accumulates until it blocks airflow and cooling efficiency drops. You may also notice the freezer or fresh food section running warm, the compressor running continuously, or food spoiling faster than normal. To confirm with the refrigerator unplugged: remove the rear freezer access panel, disconnect the heater's wire harness, and test the heater's terminals with a multimeter set to continuity mode. A working heater shows continuity (low resistance); a failed heater shows an open circuit (infinite resistance). If you measure no continuity, the heater has burned out and needs replacement.
Should I replace the defrost thermostat and timer at the same time?
Yes, it's strongly recommended. The defrost heater, defrost thermostat, and defrost timer/control board work together as a system — the timer (or control board on newer models) initiates the defrost cycle, the thermostat monitors the temperature at the coils and terminates the cycle when the coils are above freezing, and the heater provides the heat that melts the frost. When one component fails, the others have typically experienced similar age and stress, and a near-term failure of another defrost component is common. Since the rear access panel must already be off and the components are right next to each other, replacing all three in a single session prevents a repeat repair down the road.
Should I manually defrost my freezer before installing the new heater?
If there's significant ice buildup on the evaporator coils or rear wall, yes — you need to clear it before installing the new heater. Leave the freezer empty and unplugged with the door open for 12–24 hours (or longer for heavy ice) to let everything thaw naturally. Place towels at the base to catch melt water. Do NOT chip or pry ice off the evaporator coils with any tool — the aluminum fins damage easily and a damaged coil is a far more expensive repair. Once everything is fully thawed and dried, you can proceed with the heater replacement.
My refrigerator/freezer has multiple defrost heater-related part numbers — which one do I need?
Frigidaire/Electrolux uses different defrost heater part numbers across different generations and models. The 5304524953 is specifically used in the Frigidaire Professional 19 cu. ft. single-door FPRU19F8 series refrigerators and FPFU19F8 series upright freezers, plus a smaller set of related Frigidaire-platform models. Before ordering, confirm your refrigerator or freezer's model number is in the compatibility list above, or check your appliance's parts diagram to verify that 5304524953 (or one of its cross-references 5304523833, AP6997296, PS16227227, 4975045) is the correct part for your specific model. If your unit is a side-by-side, French door, or other style, you may need a different defrost heater.
Is this a Genuine OEM or aftermarket part?
This is a Genuine OEM part manufactured by Frigidaire/Electrolux to factory specifications. It is the exact same defrost heater assembly installed in compatible Frigidaire, Electrolux, Crosley, Gibson, Kelvinator, Tappan, Westinghouse, White-Westinghouse, and Kenmore Frigidaire-built refrigerators and freezers from the factory — guaranteed fit, materials, and performance.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4890JL1002M Refrigerator Shelf Glass
Compatibility and Part Cross-References
This component is highly cross-compatible and is designed to fit a wide selection of bottom-freezer and standard refrigerators manufactured by LG, including specific models across the LG LFC and LRB series, as well as select Kenmore models (such as the Kenmore 795 series).
Replaces Part Number 4890JL1002M, 1550723, AH3524074, EA3524074, AP5215948, PS3524074.
Part number 4890JL1002M is a genuine, original equipment manufacturer (OEM) refrigerator crisper cover glass shelf made primarily by LG Electronics. It functions as the clear glass insert that sits directly inside the plastic crisper drawer frame, acting as a sturdy, tempered-glass roof for your fruit and vegetable bins while serving as a functional storage shelf above them.
Genuine OEM ADQ73913310 Refrigerator Water Filter Housing Assembly
The Genuine OEM LG ADQ73913310 is the water filter housing assembly for select LG refrigerators. LG lists it as "Filter Assembly, Water." It is the housing, not the replaceable filter cartridge. The assembly includes the water reservoir that holds water for the dispenser, the filter head that secures the water filter, the water inlet valve, tube connectors, and the water reservoir cover. If the water dispenser isn't working properly, a faulty filter assembly may be the cause.
This is the original LG part, not an aftermarket equivalent. The replacement water filter cartridge is a separate part and is not included, so check your model number before ordering.
Quick Answer
The Genuine OEM ADQ73913310 Water Filter Housing Assembly replaces the water reservoir, filter head, inlet valve, tube connectors, and cover on a compatible LG refrigerator whose filter housing is damaged, leaking, or not working. Does not include the filter cartridge. Classic symptom: the water dispenser isn't working properly, or the filter area leaks.
Common Problems This Part Fixes
Water dispenser not working properly
Leak at the water filter housing
Damaged filter head or reservoir cover
Worn or faulty water inlet valve or tube connectors in the filter assembly
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This water filter housing assembly is listed under the following part number:
ADQ73913310, 4952566, ADQ73913311, MJX64471402, ALG52942, AP6887592, EAP12724758, PD00068672, PS12724758
We have not found any superseded or alternate manufacturer numbers for this assembly. LG sells similar-looking filter assemblies under other numbers, so if your old assembly or parts diagram shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This water filter housing assembly is listed for LG refrigerators, including these examples:
LG LRMVS3006S, LRMVC2306D, LRMVS3006D, LRMDS3006S
LG LRFVC2406S, LRFVS3006S, LRFDS3006D, LRFDC2406S
LG LRFXC2406D, LRFXC2416D
Note: The models above are a sample of the roughly 30 models retailers list, not a full list. Check your full model number against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM LG water filter housing assembly, not an aftermarket equivalent
Includes the water reservoir, filter head, water inlet valve, tube connectors, and reservoir cover
Complete assembly, so there is no need to source the pieces separately
Water filter cartridge not included
Product Specifications
Part Number
ADQ73913310
OEM Part Number
ADQ73913310
Part Type
Refrigerator Water Filter Housing Assembly
Condition
Genuine OEM
Manufacturer
LG
Assembly Includes
Water Reservoir, Filter Head, Water Inlet Valve, Tube Connectors, Reservoir Cover
Application
Select LG Refrigerators
Installation Notes
⚠️ Unplug Power And Shut Off Water Before Installing Move perishable food to a cooler, unplug the refrigerator, and shut off the water supply before beginning. Wear work gloves. Follow your model's service guide to reach the water filter assembly and its water line connections. Note how the tubes and wiring connect, disconnect them, and remove the old assembly. Fit the new assembly in the same position and reconnect the tubes and wiring. Restore water and power, check every connection for leaks, and run water through the dispenser to purge air.
Frequently Asked Questions
Is this the water filter cartridge?
No. This is the housing assembly that holds the filter: the reservoir, filter head, inlet valve, tube connectors, and cover. The replaceable water filter cartridge is a separate part.
My water dispenser isn't working properly. Is this the part I need?
A faulty filter assembly is one possible cause. Before replacing it, check the water supply, the filter cartridge, and whether the filter is seated correctly. If the housing, valve, or connectors are damaged or leaking, replacing the assembly is the repair.
Is this an OEM or aftermarket part?
This is a genuine OEM part from LG, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for roughly 30 LG refrigerator models, but the model list above is only a sample. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
WP2315548 Refrigerator Genuine Evaporator Fan Motor
Replaces Part Numbers: WP2315548, 2315548, 1194733, 2220149, AP6007249, PS11740361.
Description: The Evaporator Fan Motor is a Genuine OEM part for specific Whirlpool, Maytag refrigerator models. It is responsible for circulating cold air within the fridge and freezer compartments, helping to maintain even temperatures and keep food fresh. Causes of a bad evaporator fan motor include failure due to normal wear and tear over time, damage due to improper cleaning, or issues with the motor's electronic components.
WR60X10185 Genuine OEM GE Refrigerator Evaporator Fan Motor
The WR60X10185 is a genuine GE OEM evaporator fan motor located in the freezer compartment, for GE, Hotpoint, and select Kenmore, Haier, Monogram, and Café refrigerators. This motor pulls air across the evaporator coils to strip heat from it, then circulates that cold air through the freezer and, via ducting, to the fresh food compartment. This particular motor does not include a thermistor — it ships as a fan motor with a 4-wire harness on a 6-pin connector, with two of those six pin slots left empty. If your refrigerator's original connector has a white thermistor wire in it, or a separate connector for a freezer light, this is not the correct motor for your unit.
Rated 9.75V DC, 3.25W. A fan motor generally has a long service life, but it can burn out quickly if debris or ice buildup obstructs the blade and forces the motor to work against resistance it wasn't designed for. Common symptoms of a failing motor include unusual noise from the freezer, a fresh food compartment that's warmer than it should be while the freezer stays reasonably cold, frost or ice accumulating around the fan or coil, and a refrigerator that runs constantly trying to compensate for lost circulation. It directly replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, EAP1019114, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, and WR60X10157.
Quick Answer
The WR60X10185 Genuine OEM GE Refrigerator Evaporator Fan Motor fixes GE, Hotpoint, and select Kenmore refrigerators where the fresh food section runs warm while the freezer stays cold, there's unusual noise from the freezer, or frost is building up around the coil. 9.75V DC, 3.25W, 4-wire harness on a 6-pin connector (2 pins empty). Does NOT include a thermistor. Replaces AP3875639, 1170107, 197D2039P007, 197D2039P008, PS1019114, WR23X10353, WR23X10355, WR23X10364, WR60X10043, WR60X10154, and others listed below. If your old connector has a white thermistor wire, you need WR60X10074 instead; if it has a light connector, you need WR23X10467.
Common Problems This Part Fixes
Fresh food compartment running warmer than normal while the freezer stays reasonably cold
Unusual noise — humming, buzzing, or grinding — coming from the freezer
Freezer not cooling properly, which in turn affects compressor performance
Frost or ice buildup accumulating around the fan blade or evaporator coil
Refrigerator running continuously as it struggles to maintain temperature
Fan motor that has burned out due to an obstruction preventing the blade from turning
Fan blade that doesn't spin freely, or doesn't spin at all, when checked by hand
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
WR60X10185, WR60X10043, WR60X10059, WR60X10068, WR60X10083, WR60X10084, WR60X10099, WR60X10149, WR60X10152, WR60X10154, WR60X10157, WR23X10346, WR23X10350, WR23X10353, WR23X10355, WR23X10364, WR23X10404, WR23X10405, WR23X10406, 197D2039P013, 1170107, UDQT26GE4, AP3875639, AGE29155, PD00000986, PS1019114, EAP1019114
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select GE and Hotpoint refrigerators, and also fits select Kenmore, Haier, Monogram, and Café refrigerators built on the GE platform.
Note — check your connector before ordering: GE uses several different evaporator fan motor variants that look nearly identical, and choosing the wrong one means the connector or function won't match your refrigerator. This WR60X10185 motor has no thermistor and a plain 4-wire harness with 2 empty slots on its 6-pin connector. If your old motor's connector has a white thermistor wire in it, you need WR60X10074 instead (harness with integrated thermistor). If your old connector instead has a dedicated light connector, you need WR23X10467. This part is also a separate motor from our WR60X10318 listing, which is a side-by-side platform assembly with its own integrated thermistor and a longer harness. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which motor fits your refrigerator.
Key Features
Genuine GE OEM part — factory-specified motor and blade design
Pulls air across the evaporator coils and circulates it through the freezer and fresh food compartments
Resolves "fresh food warm while freezer stays cold," "unusual noise," and "frost buildup" symptoms caused by fan motor failure
Rated 9.75V DC, 3.25W
Includes the fan motor and 4-wire harness assembly (does not include thermistor)
Direct drop-in replacement matching the original mounting and blade fitment
Replaces a wide range of legacy WR23X and WR60X part numbers plus AP3875639 and PS1019114
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WR60X10185
Part Type
Refrigerator Evaporator Fan Motor
Condition
Genuine OEM
Brand
GE
Location
Freezer compartment
Voltage
9.75V DC
Wattage
3.25 W
Harness
4-wire, 6-pin connector (2 pins unused)
Includes Thermistor
No
Quantity
1 fan motor
Compatible Brands
GE, Hotpoint, Kenmore, Haier, Monogram, Café
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check Your Connector Type First Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before removing the old motor, look closely at its connector: confirm it's a plain 4-wire harness with no thermistor wire and no separate light connector, matching this replacement. Access is through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new WR60X10185 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
How do I know if I need this motor or the one with the thermistor?
Look directly at your old motor's electrical connector before ordering. This WR60X10185 motor has a plain 4-wire harness on a 6-pin plug, with two of the six pin positions left empty — there's no thermistor wire involved. If your connector instead has a white thermistor wire running into it, you'll need WR60X10074, which includes an integrated thermistor and is not interchangeable with this motor. If your connector has a separate plug specifically for a freezer light, you'll need WR23X10467 instead.
My fresh food section is warm but the freezer seems fine. Is this the right part?
Yes, this is a very common and telling symptom pattern. The freezer sits right next to the evaporator coil and can stay reasonably cold through proximity even with weakening air circulation, but the fresh food compartment depends entirely on the fan pushing cold air through the ducting to reach it. When the fan motor fails or slows down, the fresh food side is usually the first and most noticeably affected area, and GE's own guidance confirms that a fresh-food-warm/freezer-fine pattern points to this fan.
Why would a fan motor "burn out quickly" instead of just wearing out slowly?
While this motor generally has a long service life, it can fail rapidly if something obstructs the fan blade from turning — commonly built-up frost or ice, or occasionally debris. When the blade can't turn freely, the motor works against resistance it wasn't designed for, which accelerates internal wear and can burn it out much faster than normal aging would. Clearing ice from around the fan before or during replacement helps prevent stressing the new motor the same way.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original 9.75V, 3.25W motor design, blade fitment, and 4-wire harness configuration of the fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
4681JB1029D Refrigerator Genuine OEM Condenser Fan Motor
Fits Specific LG, Kenmore Refrigerator Models
Replaces Part Numbers: 4681JB1029D, EAU61644104, 1267566, AH3523330, EA3523330, OEM17751134, AP4437783, PS3523330.
Description: This Condenser Fan Motor is a Genuine part for specific LG, Kenmore refrigerator models. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor
The EAU61524007 is a genuine LG OEM evaporator fan motor for LG and select Kenmore refrigerators. This motor circulates air over the evaporator coil and distributes that cooled air into the fresh food and freezer compartments in a balanced way, which is what keeps temperatures even throughout the refrigerator and helps prevent frost from building up on the coil.
DC-powered, white in color, with an assembled height of approximately 1 inch. Over time, the motor's bearings can wear out, or general electrical failure can set in from years of continuous cycling. A failing evaporator fan motor produces a wide range of symptoms since it affects both compartments and the defrost system: the refrigerator may not start at all, either compartment may run too warm or too cold, or frost buildup may appear where it shouldn't. Unusual noise from the freezer is another common early sign of a struggling motor. It directly replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349.
Quick Answer
The EAU61524007 Genuine OEM LG Refrigerator Evaporator Fan Motor fixes LG and select Kenmore refrigerators that won't start, run too warm or too cold in either compartment, or show frost buildup where it shouldn't be. DC motor, white, approx. 1" assembled height. Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, PD00006349. Not the same as the similarly-numbered EAU61524002 motor (DC13V, 0.265A, 3.5W) — confirm you have the exact number before ordering.
Common Problems This Part Fixes
Refrigerator won't start
Refrigerator compartment running too warm
Refrigerator compartment running too cold
Freezer compartment running too warm
Freezer compartment running too cold
Frost buildup where it shouldn't be occurring
Unusual noise from the freezer indicating a struggling fan motor
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator evaporator fan motor directly replaces the following OEM and cross-reference part numbers:
EAU61524007, EAU60694510, 3286319, AP5950081, EAP10058947, PS10058947, ALG54568, PD00006349
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This evaporator fan motor is compatible with select LG refrigerators, and also fits select Kenmore and Kenmore Elite refrigerators built on the LG platform, including model numbers such as LFX31915SW, LFX25992ST, and GRL318LSJP.
Note — not the same as EAU61524002: A similarly-numbered part, EAU61524002, is a separate LG evaporator/freezer fan motor rated DC13V, 0.265A, 3.5W, used on different models. Always verify your full model number and match the exact part number before ordering. Contact our support team with your model number if you're unsure which motor your refrigerator needs.
Key Features
Genuine LG OEM part — factory-specified motor design and airflow performance
Circulates air over the evaporator coil and distributes it evenly to both compartments
Resolves "won't start," "running too warm or too cold," and "frost buildup" symptoms caused by fan motor failure
DC-powered motor
White finish, approximately 1" assembled height
Direct drop-in replacement matching the original mounting and blade fitment
Replaces EAU60694510, AP5950081, PS10058947, EAP10058947, and PD00006349
Compatible with LG and select Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
EAU61524007
Part Type
Refrigerator Evaporator Fan Motor
Condition
Genuine OEM
Brand
LG
Function
Circulates air over the evaporator coil to both compartments
Power Type
DC
Color
White
Assembled Height
Approx. 1 in.
Quantity
1 fan motor
Compatible Brands
LG, Kenmore, Kenmore Elite
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Access is typically through the freezer's rear interior panel: remove shelving and bins as needed, then remove the screws securing the back panel to expose the evaporator coil and fan assembly. If there's significant frost or ice around the fan or coil, let the unit sit unplugged with the door open for a few hours, or run a manual defrost, before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if a blade isn't included, matching the original orientation. Mount the new EAU61524007 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the back panel. Restore power and monitor both compartments over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My refrigerator won't start at all. Could this really be the fan motor?
Yes, this is one of the documented symptoms for this part on LG's own service guidance. Because this motor is tied into the refrigeration and defrost circuit, a failure here can present as the unit not starting at all, in addition to the more expected symptoms like temperature problems or noise. That said, other components can produce a similar no-start symptom, so it's worth confirming this diagnosis if you're not fully certain.
Both compartments are running warm, not just one. Does that still point to this motor?
Yes. Since this motor is responsible for distributing cooled air to both the fresh food and freezer compartments from the evaporator coil, a failure here can affect both areas simultaneously rather than just one, unlike some other fan motor designs that mainly affect the compartment further from the coil.
How do I make sure I'm ordering this exact motor and not a similar one?
Check the part number printed directly on your old motor if it's legible, or confirm your refrigerator's full model number against the compatibility list. LG has released similarly-numbered motors, such as EAU61524002, that serve different models and have different electrical specifications, so matching by number is more reliable than matching by general appearance.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original motor design, blade fitment, and mounting configuration of the evaporator fan motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
