Search results for "dryer vent"

WP697772 Dryer Blower Wheel - Compatible with Whirlpool, Maytag, Kenmore, Amana Product Description Restore your dryer’s performance with the WP697772 Blower Wheel. This genuine OEM replacement blower wheel attaches to the drive motor shaft, circulating air through the drum and out the exhaust vent for efficient drying. Designed for Whirlpool, Maytag, Kenmore, Amana, and other dryers, it fixes issues like reduced airflow, long drying times, or noisy operation. Note: Includes one blower wheel (clamp not included). Note reverse threads and take photos of disassembly. Order a new wheel if removing the old one, as it may break. Replaces part numbers: WP697772, 697772, PD00003053, EAP11743811, AP6010627, PS11743811.  Compatibility: Compatible with models including but not limited to: Whirlpool: MEDB835DW, WED5620HW, MED7230HW, WED8000DW, WED8500DC Maytag: MEDC700VW0, MGDB835DW Kenmore: 110.67862790, 110.87872600 Amana: NED4655EW Verify your model number or contact our support team for assistance. Key Features: ✅ Brand Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, KitchenAid dryers. 💨 Specifications: OEM white plastic blower wheel, 7-9/16" diameter x 3" deep, with left-handed threads for reliable airflow. 💰 Cost-Effective: OEM performance at a competitive price. 🛠️ Easy Installation: Requires a screwdriver, 1/2" ratchet, 7/16" wrench; typically installed in 30–60 minutes. 🛡️ Reliable Fixes: Resolves reduced airflow, long drying times, noisy operation, or overheating. Installation Notes: Safety First: Unplug the dryer or shut off the circuit breaker before installation to avoid electrical shock. Old wheel may break during removal; order a replacement in advance. Shop Parts-O-Matic for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer running smoothly today! Add to cart now for a budget-friendly fix!

Read more less

XPU6602-001655 Dryer Drum Belt (Made in USA) 5 Rib, 92" Drum Belt Replaces:  6602-001655, 6602-001314, AP4373659, PS4133825. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

XPARTCO DC96-00887C – DC47-00018A Dryer Thermostat Set – Compatible with Samsung & Kenmore Dryers Product Description Restore safe temperature control and reliable drying performance with the XPARTCO DC96-00887C – DC47-00018A Dryer Thermostat Set. This high-quality aftermarket kit includes the primary operating thermostat and high-limit thermostat, designed to regulate dryer heat and prevent overheating. Faulty thermostats can cause no heat, overheating, long dry times, or repeated thermal fuse failures. Replacing both components together ensures proper heat cycling and dependable dryer operation. DC96-00887C Thermal fuse with bracket. The fuse is not resettable and will need to be replaced if blown. If the dryer does not heat, the thermal fuse may be blown. 250V, 160C, -35C. 320F Fits Samsung, Whirlpool and Kenmore dryers. DC96-00887A Replaces Part Numbers: DC96-00887C, DC96-00887A, AP5966894, PS4276292, WP35001193, 35001193, AP6008689, PS11741829. DC47-00018A  L260-50F. 125/250V. 25A. 1/4" spade terminals. Used on DC97-14486A elements. DC47-00018A Replaces Parts Numbers: DC47-00018A, AP4201898, PS4205217, 35001092, WP35001092 AP6008682, PS11741822, EXPDC47-00018A, L260-50F. Compatibility This replacement dryer thermostat set fits select Samsung and Kenmore (Samsung-manufactured) electric dryers. Example compatible models include (but are not limited to):Samsung DV210AEW, DV330AEW, DV42H5000EWKenmore 592-49045, 592-49303 Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement Set – Matches OEM temperature regulation performance 🌡️ Accurate Heat Control – Maintains proper drying temperatures and prevents overheating 🔥 High-Limit Protection – Helps prevent thermal fuse blowouts 💰 Cost-Effective Repair – Reliable solution without OEM pricing 🛡️ Fixes Common Issues – Solves no heat, overheating, long dry times, or cycling problems 📐 Product Specification Part Numbers: DC96-00887C, DC47-00018A Component Type: Dryer Operating Thermostat & High-Limit Thermostat Set Application: Heater housing temperature regulation Material: Metal thermostat bodies with bimetal temperature discs Mounting: Screw-mounted Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock. Steps: Disconnect dryer power and remove the rear panel. Locate the thermostats on the heater housing. Disconnect wiring and remove the old thermostats. Install the new XPARTCO DC96-00887C & DC47-00018A thermostats. Reconnect wiring, reinstall the panel, and restore power. Run a test cycle to confirm proper heating. ⏱️ Time Required: 15–25 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore proper dryer heat control and safety — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO W10112954 Dryer Drum Belt – Replacement for Whirlpool, Maytag, Amana, and More Product Overview This Dryer drive Belt is a replacement part that is guaranteed to keep your dryer running smoothly. Compatible with a range of Whirlpool dryer models, including brands such as Whirlpool, Kenmore, and Maytag. This Drive Belt is an essential component that helps your dryer drum rotate efficiently, ensuring optimal drying performance. Made in USA – Durable, high-grade construction Replaces Part Numbers This drum belt replaces part numbers WPW10112954, W10112954, 1447719, PD00003553, EAP11748388, AP6015116, PS11748388.  It matches original specifications for length, width, and tension to ensure proper operation. Compatible Brands Compatible with many dryers from Whirlpool, Maytag, Amana, Crosley, Admiral, and Kenmore (Whirlpool-built). Fits a range of front-load and top-load electric and gas dryer models. Key Features: ✅ Made in USA – Durable, high-grade construction 🔁 Replaces: WPW10112954, AP6015092, PS11748690 🧰 Easy to install – fits Whirlpool, Kenmore, Maytag & more 📦 Built to OEM standards for a long-lasting fit ⚠️ Unplug appliance before servicing. Contact us to confirm model compatibility. 💯 30-Day Money Back Guarantee🔧 Part Number: W10112954 Fixes the Following Issues Dryer drum won’t spin Belt is visibly cracked, frayed, or broken Dryer makes thumping or squealing sounds Motor runs but clothes stay stationary Why Buy from Parts-O-Matic Cost-effective aftermarket solution Fast and free U.S. shipping Trusted by professional repair technicians and DIYers Easy returns and dependable customer service

Read more less

Choice 6602-001655 Dryer Drum Belt  Drum Belt Replaces: 6602-001655, 6602-001314, 5PH2337, AP4373659, PS4133825. 5 Rib, 92" Description: This Belt is a replacement part is compatible with specific Samsung dryer models. The belt attaches to the motor pulley and spins the drum as the motor rotates. Over time, the belt can snap. This is due to general wear and tear, overloading, or excessive friction do to a damaged felt seal. Whenever the dryer belt breaks, the drum will not rotate and would need to be replaced. This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO XP6974 Dryer Thermostat Kit Replaces WP3387134, WP3392519, W10900067, 279816 The XPARTCO XP6974 is an aftermarket dryer thermostat kit containing four thermal components for Whirlpool-family electric and gas dryers including Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef. The kit includes the cycling thermostat (WP3387134), thermal fuse (WP3392519), high-limit thermostat and thermal cut-off kit (279816 / W10900067) — the complete set of heat-sensing and safety components that regulate dryer temperature and prevent dangerous overheating. These four components work together to control and protect the dryer's heating system. When any one of them fails, the dryer may produce no heat, overheat, run too long, or stop mid-cycle. Because a failed thermal fuse is almost always caused by an underlying overheating condition that also stresses the other components, replacing all four together in a single repair is the recommended approach. Includes all wiring hardware needed for installation. Installs in 20–30 minutes with basic hand tools. Quick Answer The XPARTCO XP6974 Dryer Thermostat Kit fixes Whirlpool-family dryers that produce no heat, overheat, take too long to dry, or stop mid-cycle. Includes all four thermal components: cycling thermostat (L155-25), thermal fuse (196°F), high-limit thermostat (L250-80), and thermal cut-off (309°F). Compatible with Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, and Magic Chef electric and gas dryers. Common Problems This Kit Fixes Dryer produces no heat — thermal fuse or high-limit thermostat has blown Dryer takes multiple cycles or very long time to dry clothes Dryer overheats — clothes or drum too hot to touch after a cycle Dryer shuts off mid-cycle and will not restart Dryer tumbles normally but generates no heat at all Dryer runs too long because cycling thermostat is not regulating temperature Repeated thermal fuse failures — underlying thermostat fault causing recurring overheating What's in the Kit Part 1 of 4 WP3387134 Cycling Thermostat Rated L155-25 · Monitors drum air temperature and cycles the heating element on and off to maintain the set drying temperature · Located on the exhaust duct or blower housing · Should show closed continuity at room temperature Part 2 of 4 WP3392519 Thermal Fuse Opens at 196°F (91°C) · One-time safety device located on the exhaust duct · Permanently interrupts power to the heating element if the dryer overheats · Cannot be reset — must be replaced if blown · Most common cause of no-heat in Whirlpool-family dryers Part 3 of 4 High-Limit Thermostat (279816 / W10900067) Rated L250-80 · Mounted on the heating element housing · Opens at approximately 250°F to cut power to the heating element if temperature exceeds safe limits · Resets automatically when it cools · Should show closed continuity at room temperature Part 4 of 4 Thermal Cut-Off Fuse (3977393 / 279816 kit) Opens at 309°F · Backup one-time safety device on the heating element housing · Permanently interrupts power to the heating element if the high-limit thermostat fails to open · Cannot be reset — must be replaced if blown Replaces Part Numbers WP3387134 Cycling Thermostat cross-references: WP3387134, WP3387134VP, 3387134, 3387135, 3387139, 306910, 3-6910, ET187, AP6008270, PS11741405 WP3392519 Thermal Fuse cross-references: WP3392519, WP3392519VP, 3392519, 3388651, 694511, 80005, ET401, G4AP0500, AP6008325, PS11741460 279816 High-Limit Thermostat and Thermal Cut-Off Kit cross-references: 279816, 279816VP, W10900067, 3977393, 3977767, WP3977767, WP3977767VP, 3399848, 3399693, 2651, AP3094244, AH334299, EA334299, EAP334299, PS334299 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This thermostat kit is compatible with select gas and electric dryers from the following brands: Whirlpool dryers (gas and electric) Kenmore / Sears dryers (Whirlpool-built models) Maytag dryers (gas and electric) Amana dryers KitchenAid dryers Roper dryers Admiral dryers Estate dryers Crosley dryers Inglis dryers Magic Chef dryers Important: If your thermal fuse has blown, always check for the root cause before replacing — a clogged exhaust vent is the most common cause of dryer overheating. Clean the full length of the exhaust duct before or after this repair. If the vent is clear, a failed cycling thermostat or high-limit thermostat is likely the root cause. Key Features Complete 4-part thermal kit — covers the cycling thermostat, thermal fuse, high-limit thermostat, and thermal cut-off in a single repair Cycling thermostat (L155-25) — regulates drum temperature to maintain consistent, efficient drying Thermal fuse (196°F) — one-time safety device that permanently interrupts heat if the dryer overheats High-limit thermostat (L250-80, ~250°F) — cuts power to the heating element when temperature exceeds safe limits; auto-resets Thermal cut-off (309°F) — backup one-time safety device protecting against heating element runaway Replacing all four parts together ensures the complete thermal circuit is renewed — prevents recurrence if a failing thermostat caused the fuse to blow Includes all wiring hardware for installation Compatible with 11 major appliance brands on the Whirlpool platform Aftermarket replacement built to OEM-equivalent quality standards DIY repair — installs in 20–30 minutes with basic hand tools Product Specifications Kit Part Number XP6974 Condition Aftermarket Replacement Application Gas and Electric Dryers Kit Includes 1x WP3387134 Cycling Thermostat, 1x WP3392519 Thermal Fuse, 1x High-Limit Thermostat (L250-80), 1x Thermal Cut-Off Fuse (309°F), wiring hardware Cycling Thermostat Rating L155-25 (closes at 155°F, opens at 25°F differential) Thermal Fuse Trip Temp 196°F (91°C) — one-time, non-resettable High-Limit Thermostat Rating L250-80 (opens at ~250°F) — auto-resets Thermal Cut-Off Trip Temp 309°F — one-time, non-resettable Compatible Brands Whirlpool, Kenmore, Maytag, Amana, KitchenAid, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef Installation Notes ⚠️ Unplug Dryer and Shut Off Gas Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the back panel of the dryer to access the heating element housing and exhaust duct. The thermal fuse (WP3392519) and cycling thermostat (WP3387134) are located on the exhaust duct or blower housing — disconnect the wires, unscrew the mounting screws, and install the new parts in the same positions. The high-limit thermostat and thermal cut-off (279816 kit) are located on the heating element housing — disconnect the wires and unscrew the mounting screws to remove the old parts and install the new ones. Reconnect all wires to the correct terminals — take a photo before disconnecting to reference during reinstallation. Reassemble the back panel, restore power, and run a test cycle to verify heat. Tip: Before running the dryer, also clean the full length of the exhaust duct — a clogged vent is the most common root cause of dryer overheating and repeated thermal fuse failures. Tools needed: Phillips screwdriver, 1/4" nut driver, needle-nose pliers. Frequently Asked Questions What does each part in this kit do? The cycling thermostat (WP3387134) monitors the air temperature in the exhaust duct and cycles the heating element on and off to maintain the correct drying temperature — it is the part that controls how hot the dryer gets during normal operation. The thermal fuse (WP3392519) is a one-time safety device that permanently cuts power to the heating element if the dryer overheats above 196°F — it is the most common cause of no-heat in Whirlpool-family dryers. The high-limit thermostat opens at approximately 250°F to cut heating element power if temperature gets too high, and resets automatically when it cools. The thermal cut-off is a backup one-time fuse on the heating element that opens at 309°F if the high-limit thermostat fails to protect the heater. Why should I replace all four parts instead of just the one that failed? When a thermal fuse blows, it almost always blew because the dryer overheated — and that overheating event put significant stress on all the other thermal components as well. A failing cycling thermostat is the most common cause of repeated thermal fuse failures: if the cycling thermostat stops regulating temperature correctly, the dryer runs too hot, the high-limit thermostat is repeatedly stressed, and the thermal fuse eventually blows. Replacing just the fuse without replacing the cycling thermostat means the same overheating will blow the new fuse. Replacing all four parts at once eliminates that risk in a single repair. How do I test these parts with a multimeter? Set the multimeter to continuity or resistance mode. The thermal fuse (WP3392519), cycling thermostat (WP3387134), and high-limit thermostat should all show closed continuity (near-zero resistance) at room temperature. The thermal cut-off should also show closed continuity at room temperature. Any part that reads open (no continuity / infinite resistance) at room temperature has failed and needs to be replaced. A blown thermal fuse or cut-off will always read open — they are one-time devices and cannot reset. What causes the thermal fuse to blow repeatedly? The most common cause by far is a clogged exhaust vent — lint accumulation inside the dryer duct restricts airflow, causing heat to build up inside the dryer cabinet until the thermal fuse trips. Always clean the full length of the exhaust duct before and after replacing these parts. Other causes include a failing cycling thermostat that is not regulating temperature correctly, a stuck heating element relay, or a dryer placed in an enclosed space without adequate ventilation. Is this kit compatible with both electric and gas dryers? Yes — the XP6974 kit is compatible with both electric and gas Whirlpool-family dryers. Both types use the same cycling thermostat (WP3387134) and thermal fuse (WP3392519). The high-limit thermostat and thermal cut-off (279816 kit) are located on the heating element in electric models and on the burner assembly area in gas models. Always verify your specific model number before ordering to confirm all four parts apply to your dryer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 661570 Dryer Drum Belt Replaces 661570V The XPARTCO 661570 is an aftermarket replacement dryer drum belt compatible with select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Crosley, Admiral, and Speed Queen dryers. The drum belt wraps around the outside of the dryer drum, loops around the idler pulley and motor pulley, and drives the drum to rotate during every drying cycle. Without a functioning belt, the drum cannot spin and clothes will not tumble or dry. Made from high-strength rubber, this 4-rib belt measures 93-1/2 inches long x 1/4 inch wide x 1/8 inch high with 4 ribs and 3 grooves. It is a direct drop-in replacement for OEM part numbers 661570V and 661570, and is part of the 4392067 dryer repair kit. It pairs with the W10837240 idler pulley and WPW10314173 drum rollers for a complete drum drive overhaul. Installs in 30–45 minutes with basic hand tools. Quick Answer The XPARTCO 661570 Dryer Drum Belt fixes dryers where the drum is not spinning, clothes are not tumbling, or a thumping/squealing noise is present during operation. Compatible with select Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Crosley, Admiral, and Speed Queen dryers. Measures 93-1/2" L x 1/4" W x 1/8" H with 4 ribs and 3 grooves. Common Problems This Part Fixes Dryer drum not spinning — motor runs but drum stays still Clothes not tumbling during the drying cycle Thumping, squealing, or slapping noise during operation Dryer runs but produces no heat because drum is stationary Burning rubber smell coming from the dryer Visible broken or frayed belt pieces found inside the dryer cabinet Dryer shuts off shortly after starting due to drum not rotating Replaces Part Numbers This drum belt directly replaces the following OEM and cross-reference part numbers: 661570V, 661570, 3387610, 3389728, 3393999, 339728, 4248258, 661570VP, AWP761693, OEM17951196, PD00023608, FIX382430, AP5983729, PS11722115. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This drum belt is compatible with select dryers from the following brands: Whirlpool dryers (gas and electric) Maytag dryers (gas and electric) Kenmore / Sears dryers (select Whirlpool-built models) Amana dryers KitchenAid dryers Crosley dryers Admiral dryers Speed Queen dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Drives the dryer drum via the idler pulley and motor pulley for smooth, consistent tumbling every cycle 93-1/2" length x 1/4" width x 1/8" height — 4-rib, 3-groove design for a secure, slip-free grip on the pulleys Made from high-strength rubber — resists cracking, stretching, heat damage, and oil Direct replacement for OEM part numbers 661570V and 661570 — no modification required Part of the 4392067 dryer repair kit — pairs with W10837240 idler pulley and WPW10314173 drum rollers Aftermarket replacement built to OEM-equivalent quality standards DIY-friendly repair — installs in 30–45 minutes with basic hand tools Product Specifications Part Number 661570 OEM Part Number 661570V Part Type Dryer Drum Drive Belt Condition Aftermarket Replacement Application Gas and Electric Dryers Length 93-1/2 inches Width 1/4 inch Height 1/8 inch Ribs 4 ribs, 3 grooves Material High-strength rubber Color Black Compatible Brands Whirlpool, Maytag, Kenmore, Amana, KitchenAid, Crosley, Admiral, Speed Queen Part of Kit 4392067 Dryer Repair Kit Often Replaced With W10837240 Idler Pulley, WPW10314173 Drum Rollers Installation Notes ⚠️ Safety First — Unplug Dryer Before Starting Unplug the dryer from the power source (and shut off the gas supply for gas dryers) before beginning any repair. Remove the lint screen and unscrew the Phillips screws inside the lint screen housing. Use a putty knife to release the top panel clips and lift the top panel. Remove the front panel to access the drum. Release the belt from the idler pulley, lift the drum slightly, and slide the old belt off. Loop the new 661570 belt around the drum with the ribbed side facing inward toward the drum. Route the belt around the idler pulley and motor pulley — consult your dryer's service manual or a model-specific repair video for the correct belt path. Reassemble and run a test cycle. Tip: While the drum is out, inspect and replace the idler pulley (W10837240) and drum rollers (WPW10314173) if worn. Tools needed: Phillips screwdriver, putty knife or flat pry tool. Frequently Asked Questions What is the difference between 661570 and 661570V? These are the same belt. 661570V is the updated OEM part number (the "V" denotes the current version) that superseded the original 661570. Both numbers refer to the identical drum belt — this aftermarket replacement is compatible with both. How does the 661570 differ from the 341241 and W10205415 belts? All three are Whirlpool-family dryer drum belts, but they differ in length, width, and rib count. The 661570 is 93-1/2" long x 1/4" wide with 4 ribs and 3 grooves. The 341241 is 92-1/4" long x 1/4" wide with 4 ribs and 3 grooves. The W10205415 is 92" long x 3/8" wide with 5 ribs and 4 grooves. They are not interchangeable — always use the part number specific to your dryer model. How do I know if my drum belt is broken? The most obvious sign is that the dryer motor hums but the drum does not spin. You may also notice a thumping or slapping sound, a burning rubber smell, or damp clothes after a full drying cycle. Open the dryer cabinet to visually confirm if the belt is broken, frayed, or stretched out of shape. Should I also replace the idler pulley and drum rollers? Yes — since the dryer is already disassembled, it is highly recommended to inspect and replace the idler pulley (W10837240) and drum support rollers (WPW10314173) at the same time. All three parts wear together and are sold together in the 4392067 dryer repair kit. Replacing all three prevents having to disassemble the dryer again in the near future. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from high-strength rubber to match the dimensions and performance of the original 661570V belt. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

5301EL1001J Dryer Genuine Heating Element Fits Specific LG Dryer Models. 240V, 5400W complete assembly with housing and thermostats Replaces Part Numbers: 5301EL1001J, 5301EL1001A, 1377645, AEG72910307, AH3527791, AP4439759, EA3527791, PS3527791, 5301EL1001H, 1377645, 5301EL1001E, 5301EL1001G, 5301EL1001S, 5301EL1001U, 5301EL1001W, AH3527790, AP5072170, EA3527790, PS3527790, AEG72910301, AP5669354, AEG72910309, AP7211081. Description:  This Heater Assembly is a Genuine OEM part for specific LG dryer models. This component is responsible for generating the heat required to dry clothes effectively. It consists of a heating element and necessary components that work together to maintain the desired drying temperature, ensuring clothes come out dry and ready to wear.  Causes of a bad heater assembly can include wear and tear from regular use, overheating, electrical issues, or damage to the heating element itself. A malfunctioning heater assembly can lead to inefficient drying or no heat at all. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.go

Read more less

XPARTCO WE01X25316 Dryer Door Catch The XPARTCO WE01X25316 is an aftermarket replacement dryer door catch (also called a door latch) compatible with a wide range of GE and Hotpoint electric and gas dryers in the GTD, GTX, ETD, HTX, NTX, PTD, and YTD series. The door catch is the spring-loaded latch mechanism mounted inside the dryer door panel that snaps onto the door strike on the dryer cabinet when the door is closed, holding the door securely shut during operation and activating the door switch so the dryer can run. When the catch breaks or loses its spring tension, the door will not stay closed, the dryer will not start, or the door will pop open during a drying cycle. This replacement catch is constructed from toughened nylon with a hardened manganese steel spring — materials chosen for superior wear resistance and spring durability compared to standard nylon. It is sold individually and mounts inside the dryer door panel using a snap-in clip retained by a metal retaining ring. Installation requires partially disassembling the dryer door to access the catch from the inside. It directly replaces 4512762, AP6037347, EAP11766999, PD00042653, and PS11766999. Installs in 15–30 minutes with basic tools. Quick Answer The XPARTCO WE01X25316 Dryer Door Catch fixes GE and Hotpoint dryers where the door won't stay closed, pops open mid-cycle, or won't activate the door switch to start. Toughened nylon body with manganese steel spring. Sold individually. Mounts inside the door panel — door must be partially disassembled for installation. Compatible with GE GTD3–GTD8, GTX, ETD, HTX, NTX, PTD, and YTD series dryers. Replaces 4512762, AP6037347, EAP11766999, PD00042653, PS11766999. Common Problems This Part Fixes Dryer door will not stay closed during the drying cycle Door pops open mid-cycle, stopping the dryer Dryer will not start — door switch not being activated by worn or broken catch Door feels loose or does not click firmly when closed Door catch visibly cracked, broken, or spring missing Door requires being held or pushed closed to keep the dryer running Replaces Part Numbers This door catch directly replaces the following OEM and cross-reference part numbers: WE01X25316, 4512762, AGE24874, AP6037347, EAP11766999, PD00042653, PS11766999 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door catch is compatible with select GE and Hotpoint gas and electric dryers from the following series: GE dryers — GTD3, GTD4, GTD5, GTD6, GTD7, GTD8 series (GTD33EASK0WW, GTD42EASJ1WW, GTD58EBSV0WS, GTD65EBPL0DG, GTD72EBSN0WS, GTD75ECPL0DG, GTD84ECPN0DG and related models) GE dryers — GTX2, GTX3, GTX4, GTX6 series (GTX22EASK0WW, GTX33EASK0WW and related models) GE dryers — ETD48 series (ETD48GASW0WB and related models) GE dryers — PTD6, PTD7, PTD9 series (PTD60EBPR1DG and related models) GE dryers — YTD7 series (YTD74E2PN2DG and related models) GE dryers — XTD series (XTD72E8ST1WS and related models) Hotpoint dryers — HTX2, HTX24 series (HTX21EASK0WW, HTX24EASK0WW, HTX24GASK0WS and related models) Hotpoint dryers — NTX6 series (NTX62E8ST0WW and related models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Holds the dryer door closed and activates the door switch so the dryer can run safely Toughened nylon body — superior wear resistance compared to standard nylon catches Hardened manganese steel spring — provides reliable, durable spring tension for thousands of open/close cycles Snap-in design — mounts inside the door panel with a metal retaining clip Replaces 4512762, AP6037347, EAP11766999, and PS11766999 Sold individually — one door catch per order Compatible with GE GTD, GTX, ETD, HTX, NTX, PTD, and YTD series dryers Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number WE01X25316 Part Type Dryer Door Catch (Door Latch) Condition Aftermarket Replacement Application GE and Hotpoint Gas and Electric Dryers Material Toughened nylon / Hardened manganese steel spring Mounting Snap-in inside the door panel — metal retaining clip secures in place Sold As Single door catch Compatible Brands GE, Hotpoint Installation Notes ⚠️ Unplug Dryer Before Starting — Door Disassembly Required Unplug the dryer before beginning. Unlike simpler snap-in door catches, the WE01X25316 is mounted inside the dryer door panel and requires partially disassembling the door to access it. Open the dryer door and remove the screws on the latch side of the door (typically three screws) and the screws on the hinge side (typically five screws). Gently pry the door inner and outer panels apart — work carefully around the edge. With the panels separated, locate the old catch — use pliers to squeeze the gray retaining tabs together and push downward to release the catch from the inner panel. With needle-nose pliers, squeeze the metal retaining clip and apply downward force until the clip is free. Insert the new WE01X25316 catch into the panel opening and snap it into place, then press the retaining clip back on to lock it. Reassemble the door panels and reinstall all screws. Close the door to confirm it latches firmly. Restore power and run a short cycle to verify normal operation. Tools needed: drill driver with 1/4" bit, #1 square head bit, pliers, needle-nose pliers. Frequently Asked Questions Why does installation require disassembling the door? Unlike the snap-in door catches found on many Whirlpool-family dryers — which clip into a slot accessible from the front without disassembly — the WE01X25316 mounts inside the GE door panel between the inner and outer door skins. This is a GE-specific design that provides a cleaner door exterior but requires separating the two door panels to access and replace the catch. While it is more involved than a simple snap-in replacement, it is a well-documented DIY repair that most homeowners can complete in 15–30 minutes with the right tools. My dryer door closes but the dryer still won't start — is it the catch? It may be — a worn or cracked catch may not push far enough into the door strike to fully activate the door switch, even if the door appears closed. However, if the catch appears intact and snaps firmly onto the strike, the issue may be with the door switch itself rather than the catch. The door switch (located inside the dryer cabinet at the door opening) can be tested with a multimeter for continuity in the open and closed positions. If the switch tests open in both positions, it has failed and needs replacement independently of the door catch. Is this compatible with older GE dryers that have a different door catch style? The WE01X25316 is for newer GE GTD, GTX, HTX, and related series dryers. Older GE dryers used a different door catch kit — most notably the WE01X1158 / WE1M536 / WE1M1011 style, which is a separate catch and strike kit. If your GE dryer is an older model not in the GTD/GTX/HTX series listed above, verify your model number before ordering to confirm this is the correct catch for your dryer. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from toughened nylon with a hardened manganese steel spring to match the dimensions and function of the original WE01X25316 door catch. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 12138200000320 Dryer Door Catch The XPARTCO 12138200000320 is an aftermarket replacement dryer door catch compatible with select Midea and Insignia dryers. The door catch is a small plastic spring-clip mechanism mounted on the dryer door that snaps over the door strike o12138200000320 n the cabinet opening to hold the door firmly closed during operation. When the door is closed and latched, the door switch is activated — signaling the control board that it is safe to run. When the catch breaks, cracks, or loses its spring tension, the door will not stay closed, the door switch will not activate properly, and the dryer will either not start or will stop mid-cycle. This is a snap-in replacement catch — the color or exact finish may vary by production run. It directly replaces AP7152622 and PS18161385. Sold individually. Installs in under 5 minutes — no tools required in most cases. Quick Answer The XPARTCO 12138200000320 Dryer Door Catch fixes Midea and Insignia dryers where the door won't stay closed, pops open during a cycle, or where the dryer won't start because the door switch isn't being activated. Snap-in installation — no tools required, installs in under 5 minutes. Sold individually. Replaces AP7152622, PS18161385. Common Problems This Part Fixes Dryer door will not stay closed during the drying cycle Door pops open mid-cycle, stopping the dryer Dryer will not start — door switch not being activated by a worn or broken catch Door feels loose or does not click shut firmly when closed Door catch visibly cracked, broken, or missing Dryer requires the door to be held or pushed to stay running Replaces Part Numbers This door catch directly replaces the following part numbers: 12138200000320, AP7152622, PS18161385. Contact our support team with your model number if you need confirmation before ordering. Compatibility This door catch is compatible with select dryers from the following brands: Midea dryers (gas and electric — select models) Insignia dryers (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Holds the dryer door closed and activates the door switch so the dryer can run safely Snap-in installation — no tools required in most cases; installs in under 5 minutes Durable plastic construction — designed to withstand repeated opening and closing Sold individually — one door catch per order Replaces AP7152622 and PS18161385 Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number 12138200000320 Part Type Dryer Door Catch (Door Latch Clip) Condition Aftermarket Replacement Application Gas and Electric Dryers Material Plastic Installation Snap-in — no tools required Sold As Single door catch Compatible Brands Midea, Insignia Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Open the dryer door and locate the old door catch — it is a small plastic clip mounted on the inside of the door or on the cabinet opening around the door. Press the tabs on the old catch to release it from its mounting slot and pull it free. Note the orientation before removing. Insert the new 12138200000320 catch into the slot in the same orientation and press firmly until it snaps into place. Close the door to confirm it latches securely. Restore power and run a short cycle to verify the door stays closed and the dryer operates normally. Tools needed: None in most cases; a small flat-head screwdriver may help with removal. Frequently Asked Questions What dryers is the 12138200000320 compatible with? The 12138200000320 door catch is used on select Midea and Insignia dryer models. Insignia is a Best Buy house brand whose appliances are manufactured by Midea. Always verify your exact model number before ordering to confirm this catch fits your dryer's door latch assembly. Why won't my dryer start even though I'm closing the door? If the door catch is broken or worn, the door may not be engaging the door switch firmly enough to signal the control board that the door is closed. Most dryers will not run unless the door switch is fully activated. Replacing the 12138200000320 catch restores the firm snap needed to trigger the switch. If replacing the catch does not resolve the start issue, the door switch itself may also need to be checked. Do I need to replace the door strike as well? Not necessarily. In most cases only the door catch (the spring-clip on the door) needs replacement. The door strike (the post or tab on the cabinet that the catch snaps onto) is typically more durable. Inspect the strike for cracks or breakage before ordering — if it is intact, just the 12138200000320 catch is all you need. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Midea OEM part, but is manufactured from durable plastic to match the dimensions and function of the original 12138200000320 door catch. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

DC97-07618A Dryer Drum Felt Seal – Replacement for Samsung Dryers Product Overview The DC97-07618A Dryer Drum Felt Seal is an aftermarket replacement that creates a tight seal between the dryer drum and the front or rear bulkhead. This seal helps maintain proper airflow, prevents heat loss, and keeps lint from entering the cabinet. If your dryer is noisy, takes too long to dry, or leaks lint inside, the drum felt seal may be worn out or damaged. Replacing it helps restore drying efficiency and quiet operation. Replaces Part Numbers This felt seal replaces part numbers DC97-07618A, AP4453798, PS4218879. It is designed to closely match the fit and performance of the original part. Compatible Brands Compatible with specific Samsung dryers manufactured by Samsung. Fits various front-load dryer models that use this type of drum seal. Fixes the Following Issues Dryer making scraping or thumping noises Lint collecting inside the cabinet Clothes taking longer to dry Heat escaping from the drum area Why Buy from Parts‑O‑Matic High-quality aftermarket replacement part Fast and free shipping in the U.S. Easy to install and long-lasting performance Trusted by DIYers and appliance repair pros

Read more less

XP311 Dryer Thermostat Kit – Replacement for LG 6931EL3003D, 6323EL2001B, and 6931EL3001E Product Description Restore proper temperature control and dryer performance with the XP311 Dryer Thermostat Kit, designed as a high-quality aftermarket replacement for LG thermostats 6931EL3003D, 6323EL2001B, and 6931EL3001E. This kit includes multiple thermostats and thermal fuses that regulate and protect against overheating. A failing thermostat can lead to no-heat, poor drying, or overheating issues. Replacing it with this reliable kit ensures safe, consistent drying performance. Replaces Part Numbers 6931EL3003D, 1268366, AH3530485, EA3530485, PD00001818, EAP3530485, AP4440975, PS3530485, 6323EL2001B, 1268206, 6323EL2001H, AH3529026, PD00001821, EAP3529026, EA3529026, AP4441539, PS3529026, 6931EL3001E, 1268363, 6931EL3001C, PD00023869, EAP3530481, AH3530481, EA3530481, AP4440977, PS3530481. Compatibility This replacement thermostat kit is compatible with select LG and Kenmore dryers. Example compatible models include (but are not limited to): LG DLE5955G, LG DLE2516W, and Kenmore 796.81022900. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement Kit – Designed to match LG thermostat set specifications 🌡️ Temperature Regulation – Maintains safe and consistent dryer heat levels 💰 Cost-Effective Bundle – Includes multiple thermostats and thermal fuses for one low price 🛠️ DIY Friendly – Installs easily with basic tools and clear wire connections 🛡️ Fixes Common Issues – Solves dryers not heating, overheating, or shutting off mid-cycle 📐 Product Specification Part Number: XP311 Component Type: Dryer Thermostat and Thermal Fuse Kit Material: Metal thermostat housing and heat-resistant plastic connectors Mounting: Direct-fit replacement Operating Conditions: Designed for residential electric dryers Compliance: Built to OEM-equivalent standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver, needle-nose pliers ⚠️ Safety First: Always unplug dryer before starting repairs to avoid electrical shock. Steps: Disconnect dryer from power. Remove rear access panel to expose heater housing. Identify and disconnect faulty thermostats or fuses. Install the new XP311 thermostat kit components using existing screws. Reconnect wiring harnesses securely. Restore power and test the dryer for proper heating function. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore consistent heat and drying performance — Add to Cart Now for a reliable, budget-friendly repair solution!

Read more less