XPARTCO 279393 Dryer Terminal Block Screw Kit
The XPARTCO 279393 is an aftermarket replacement terminal block screw kit compatible with a wide range of Whirlpool-family electric dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef, and Norge. The terminal block screws secure the dryer power cord wires to the terminal block — the connection point where 240V power enters the dryer. Loose, corroded, or damaged screws at this connection can cause intermittent power loss, blown fuses, tripped breakers, or dangerous arcing.
This kit includes 3 chrome-plated screws and 3 nuts — everything needed to restore a secure, conductive connection at the terminal block. The chrome plating improves electrical conductivity and corrosion resistance. Screws measure 7/16" L x 7/16" W x 11/16" H; nuts measure 1/2" L x 1/2" W x 1/8" H. Installs in under 15 minutes with basic hand tools.
Quick Answer
The XPARTCO 279393 Terminal Block Screw Kit fixes electric dryers with intermittent power, blown fuses, tripped circuit breakers, hot terminals, or visible arcing and scorching at the power cord connection. Includes 3 chrome-plated screws and 3 nuts. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, and more.
Common Problems This Part Fixes
Dryer has intermittent power or will not start at all
Internal fuses repeatedly blowing without another clear cause
Circuit breaker for the dryer repeatedly tripping
Terminal block area is hot to the touch during or after operation
Visible arcing, sparks, scorch marks, or smoke around the terminal block cover
Heating element or motor works intermittently but not consistently
Dryer power cord connection is loose, corroded, or visibly damaged
Replaces Part Numbers
This terminal block screw kit directly replaces the following OEM and cross-reference part numbers:
279393, 279393D, 279393VP, 3184, EAP334188, AWP39844, PD00003883, AH334188, EA334188, AP3020386, PS334188
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This terminal block screw kit is compatible with select electric dryers from the following brands:
Whirlpool electric dryers
Kenmore / Sears electric dryers (Whirlpool-built models)
Maytag electric dryers
KitchenAid electric dryers
Amana electric dryers
Roper electric dryers
Admiral electric dryers
Estate electric dryers
Crosley electric dryers
Inglis electric dryers
Magic Chef, Norge, and Jenn-Air electric dryers
Note: This kit is for electric dryers only. Gas dryers do not use a terminal block for power cord connections.
Key Features
Secures the dryer power cord wires to the terminal block for a safe, reliable 240V connection
Kit includes 3 screws and 3 nuts — one complete set for all three terminal positions
Chrome-plated metal construction — improves electrical conductivity and resists corrosion
Screw dimensions: 7/16" L x 7/16" W x 11/16" H; Nut dimensions: 1/2" L x 1/2" W x 1/8" H
Direct replacement for OEM part numbers 279393, 279393D, and 279393VP — no modification required
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, and more
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in under 15 minutes with basic hand tools
Product Specifications
Part Number
279393
Part Type
Terminal Block Screw and Nut Kit
Condition
Aftermarket Replacement
Application
Electric Dryers (240V terminal block)
Kit Contents
3 chrome-plated screws and 3 nuts
Screw Dimensions
7/16" L x 7/16" W x 11/16" H
Nut Dimensions
1/2" L x 1/2" W x 1/8" H
Material
Chrome-plated metal
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Admiral, Estate, Crosley, Inglis, Magic Chef, Norge, Jenn-Air
Dryer Type
Electric dryers only
⚠️ Electrical Safety Warning This kit connects the power cord to the dryer's terminal block — a high-voltage connection carrying 240V. Always unplug the dryer and shut off the circuit breaker before beginning installation. Loose or improperly tightened terminal screws can cause arcing, overheating, blown fuses, or fire. If you are not comfortable working with high-voltage electrical connections, have this part installed by a qualified appliance technician.
Installation Notes
⚠️ Unplug and Switch Off Breaker Before Starting Unplug the dryer from the wall outlet and turn off the circuit breaker for the dryer before beginning any work on the terminal block. Locate the terminal block cover plate on the back of the dryer and remove it by unscrewing the retaining screw. Use needle-nose pliers to carefully disconnect the power cord wires from the terminal block. Remove the old screws and nuts using a Phillips or flat-head screwdriver. Install the new 279393 screws and nuts into the terminal block. Reconnect the power cord wires to the correct terminals — refer to the label inside the terminal block cover or your dryer's wiring diagram to confirm wire positions. Tighten all screws firmly but do not overtighten. Replace the terminal block cover plate. Restore power and run a test cycle to verify correct operation. Tip: While the cover is off, inspect the terminal block itself (part 694431) for burn marks or damage. If the block is damaged, replace it before reinstalling. Tools needed: Phillips screwdriver, flat-head screwdriver, needle-nose pliers.
Frequently Asked Questions
What is the terminal block screw kit used for?
The terminal block screw kit secures the three wires of the dryer's power cord (two hots and a neutral, or two hots and a ground depending on cord type) to the terminal block at the back of the dryer. This is the point where 240V power enters the machine. The screws must be firmly tightened to maintain a safe, low-resistance electrical connection. If they loosen or corrode over time, resistance increases at the connection — causing heat, arcing, blown fuses, or power loss.
Can I also use this kit when installing a new dryer power cord?
Yes — this kit is commonly needed when installing a new 3-wire or 4-wire dryer power cord. When switching from a 3-wire to 4-wire cord (or vice versa), the terminal block screws and nuts often need to be loosened and retightened, and replacing them with a fresh set ensures a secure, corrosion-free connection from the start.
Should I also inspect the terminal block itself?
Yes. While the terminal block cover is off, inspect the block itself (part 694431) for burn marks, melted plastic, or damaged terminals. If the block shows any of these signs, it should be replaced before reinstalling — new screws alone cannot fix a damaged terminal block. Contact our support team to find the correct terminal block for your model.
Does this kit work for gas dryers?
No. Gas dryers use a standard 120V three-prong household plug and do not have a terminal block for power cord connections. The 279393 kit is for electric dryers only, which use a 240V outlet and require a hard-wired terminal block connection for the power cord.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is made from chrome-plated metal to match the dimensions and electrical performance of the original 279393 screw kit.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO 279457 Dryer Heating Element Wire Kit – Compatible with Whirlpool, Maytag & Kenmore Dryers
Product Description
Restore safe electrical connections and proper heating performance with the XPARTCO 279457 Dryer Heating Element Wire Kit. This high-quality aftermarket replacement kit is designed to repair damaged or burnt wiring at the dryer heating element. Over time, high heat can cause wire terminals to melt or loosen, leading to no-heat issues or intermittent operation. Replacing the wiring with this durable XPARTCO kit helps ensure secure connections and reliable dryer performance.
Note: Includes two high-temperature wires and two wire connectors (female spade connectors, 5/16"). Disconnect power before installation. Verify compatibility with your dryer model.
Replaces Part Numbers
279457, 279457VP, 3140, T2502, AP3134638, PS334206.
Compatibility
This replacement dryer heating element wire kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.
Example compatible models include (but are not limited to):
Whirlpool WED4800BQ0, WED4800XQ0, WED4850BW0, WED4900XW0, WED5321SQ0
Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, Estate (verify compatibility with heating element 4391960) MEDC215EW1, MEDC400VW0
Kenmore 110.6012010, 110.60072990
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Matches OEM wire gauge and terminal design
🔥 Heat-Resistant Wiring – Designed for high-temperature dryer environments
🔧 Secure Electrical Connections – Helps prevent arcing and power loss
💰 Cost-Effective Repair – Reliable alternative to OEM wire kits
🛡️ Fixes Common Issues – Resolves no-heat problems caused by burnt wires
📐 Product Specification
Part Number: 279457
Component Type: Dryer Heating Element Wire Kit (2 Wire and 2 Wire Connector)
Includes: High-temperature wires with factory-style terminals
Application: Heating element electrical connections
Material: Heat-resistant insulated wiring with metal connectors
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, needle-nose pliers
⚠️ Safety First: Always unplug the dryer before servicing to avoid electrical shock.
Basic Steps:
Disconnect dryer power.
Remove the rear access panel.
Locate the heating element terminals.
Remove damaged or burnt wires.
Install the new XPARTCO 279457 wire kit securely.
Reassemble the dryer and restore power.
Test dryer heating operation.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore safe dryer heating connections — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO 279816 Dryer Thermostat Kit
Product Overview
The XPARTCO 279816 Dryer Thermostat Kit is designed to regulate temperature and protect your dryer from overheating. This dryer thermal cut-off kit is a replacement part for specific Maytag, Kenmore, Roper, Whirlpool dryer models. It is designed to prevent the dryer from overheating. Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance.
Quick Answer
If your dryer is overheating, not heating properly, or shutting off unexpectedly, the 279816 thermostat kit may be faulty. Replacing it restores proper temperature control and safe operation.
Replaces Part Numbers
Replaces OEM part number: 279816, 279816VP, 3399848, 3977393, PD00002348, AWP39198, EAP334299, AH334299, EA334299, AP3094244, PS334299.
Compatibility
This dryer thermostat kit is compatible with select Whirlpool, Maytag, Kenmore, and other compatible dryers.
Whirlpool Dryers: KEYS700LQ0, RED4640YQ1, GEN2000HZ1, LER4624DZ1, LER8857EZ2, KEYS850JT1, LEN1000HQ1, LER7646EQ0, LEQ9508PG1, WED5540ST0, GCEM2990TQ1, LER3624JQ1, 885461, LER4634EZ1, LER7646JT0, LER5624DQ1, GCEM2990TQ0, 3CEP2950DN0, GEW9878PG1, LER4634EQ1, LER5636EQ3, LER8858EQ2, LEB6000PQ1, REX5634KQ1, LEQ9508LG0, LEB6000KQ2, TEDS680DQ1, LEN1000PQ1, CEDX463RQ0, TEDS680BN2, LER3624BN2, 885464, GCE2900XSW4, REX5635EQ0, LEQ7030KQ1, WED5850SW0, LET6638DQ0, LEB6300PW1, REX6646AL2, LEV6634BQ2, CEP2960JQ0, REL4632BW3, LET7646EQ2, TEDS740PQ0, LEB6300LW1, YC EDS563SQ0, LER5848EQ3, LER5636EQ1, REX5635EN2, LER4634EQ1, LER5624DZ1, EED4300SQ0, YREX4634KQ2, LEN3624BN2, WED4750XQ1, LEQ8858JQ1, LEV6634DQ0, REL3612BW3, 4GWED4900YW1, GEQ8858HQ0, WED4815EW0, LER7646EZ0, MED5700TQ1, REL4636BL2, WED5550SQ0, LEV7646AN2, TEDX540RQ1, CEE2990AG2, KEYS750LQ2, REX3514RQ0, LEC6848AW3, CED147HXW0, REX5635EQ1, KEYS700GQ0, LEN3634DW0, REL4634BW3, KEYS710LQ1, RED4440VQ1, MEDC100YQ0, REL4632DL1, MED5640TQ0, LEN3634DW1, LER8648PQ0, KEYS700EZ0, YEED4300TQ0, MED5620TQ1, YWED4916FW0, IED4400VQ0, LER5634LW0, 4KWED5790VW1, YLEQ9857LW0, KEYS700GQ0, NED4655EW1, MED5840TW0, RES7648EQ0, YMEDX500BW1, 4GAED4900YW1, LEE9848BQ2, LEN2000LG0, 7EWED1730YW1, MEDC500VW1, WED5821SW0, LER5636PQ1, 3HLER5437JQ3, LER5634EQ0, LEV7646AW2, RED4440VQ0, CEDS563MQ1, REX6646AW2, RES7646KQ0, REX5635EN0, YLEQ5000KQ0, KEYS750LT1, WED5100SQ0, LET6638DQ0, TEDX640PQ1, KEYS750LT1, KEYS700EZ0, WED5000VQ1, KEYS850LE2, LEB6300LW1, KEYS850JT1, GEW9878PG0, MEDC300BW0, MEDC400BW0, MEDC500VW0
Maytag Dryers: YNED4500VQ0, MED6600TQ0, YMEDX500BW0, MED5700TQ1, MEDC215EW1, YMED5900TW0, MEDC100YQ0, MEDC555DW1, MEDC300BW0, MEDC400BW0, MEDC500VW0, MED5600TQ1, MED5620TQ1, MED5630TQ0, MED5640TQ0, MED5707TQ0, MED5720TQ0, MED5720TQ1, MED5740TQ0, MED5740TQ1, MED5800TW0, MED5820TW0, MED5820TW1, MED5821TW0, MED5840TW0, MED5840TW1, MED5870TW0, MED5870TW1, MED5900TW0, MED5900TW1, MED5920TW0, MED5921TW0, MEDX500BW0, MEDX500BW1, MEDX655DW1, YMEDC300XW0, YMEDC400BW0, YMEDC400BW1, YMEDC415EW0, YMEDC415EW1, YMEDX500BW0, YMEDX500BW1, YMED5740TQ0, YMED5740TQ1
Kenmore Dryers: 110.62872102, 110.66514691, 110.60212990, 110.68442700, 110.62342511, 110.60814990, 110.86405850, 110.96529120, 110.6012510, 110.66854690, 110.66822694, 110.C60122511, 110.96587410, 110.66722691, 110.66512692, 110.62882101, 110.62102311, 110.69422801, 110.66862501, 110.67132411, 110.61804000, 110.66862500, 110.62842100, 110.64832400, 110.62854101, 110.60202990, 110.62602101, 110.96572830, 110.86405150, 110.67442600, 110.6012511, 110.66864500, 110.69432800, 110.60012000, 110.96587210, 110.C61112010, 110.62886101, 110.64842400, 110.66101691, 110.68402700, 110.64102301, 110.96582120, 110.65132411, 110.96575100, 110.64602300, 110.67632600, 110.66652500, 110.64912200, 110.96563820, 110.96585410, 110.66642500, 110.60012001, 110.66712692, 110.67832790, 110.62724100, 110.88762791, 110.62602100, 110.66524501, 110.68622700, 110.96575200, 110.60012001, 110.66822690, 110.68202794, 110.67342700, 110.C62332511, 110.64602301, 110.62822101, 110.62712101, 110.62802102, 110.62802100, 110.66102500, 110.67834790, 110.60722990, 110.66808690, 110.67834791, 110.69812990, 110.67622600, 110.60232001, 110.68532700, 110.66801694, 110.61402310, 110.62512100, 110.66752501, 110.96580010, 110.96564420, 110.62824101, 110.96585200, 110.66702692, 110.63102100, 110.67422600, 110.61812000, 110.64924200, 110.69622800, 110.62622100, 110.66132411, 110.62514101, 110.61262310, 110.96586400, 110.6072010, 110.66854694, 110.68652700, 110.96566400, 110.67732791, 110.66854691, 110.96566400, 110.6072010
Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure.
Common Problems This Part Fixes
Dryer overheating
Dryer not heating
Dryer shutting off prematurely
Inconsistent drying temperatures
Key Features
Includes essential thermostats for temperature control
Prevents overheating and improves safety
Restores consistent drying performance
High-quality aftermarket replacement kit
Product Specifications
Part Number: XP279816
Part Type: Dryer Thermostat Kit
Brand: XPARTCO
Condition: New
OEM / Aftermarket: Aftermarket
Application: Dryer Heating & Safety System
Troubleshooting Guide
Dryer too hot → Faulty thermostat
No heat → Failed thermal cutoff
Dryer stops mid-cycle → Overheat protection triggered
When Should You Replace This Kit?
Replace this kit if your dryer overheats, fails to heat properly, or shuts down unexpectedly due to temperature control issues.
Installation Notes
⚠️ Disconnect power before installation. Access the thermostat assembly from the rear panel and install components securely according to your dryer model.
Related Parts
Dryer Heating Element
Thermal Fuse
Dryer Timer
Frequently Asked Questions
Will this kit fit my dryer?This kit fits many Whirlpool and compatible models. Always verify your model number.
What does a thermostat kit do?It regulates dryer temperature and protects against overheating.
What are signs of a bad thermostat?Overheating, no heat, or dryer shutting off unexpectedly.
Is this OEM or aftermarket?This is a high-quality aftermarket replacement kit.
Shop With Confidence
Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support.
Fast Shipping Quality Tested Parts Compatibility Support
306508CM Dryer Front Glide Kit
Includes rivets and cushion.
Fits specific Maytag dryer models.
Replaces Part Numbers: 306508, 1309, 3-12941, 3-6508, 306508VP, 312941, AH1804752, DE747, EA1804752, K35-603, AP4037304, PS1804752.
Description: This Tumbler Bearing Kit is a replacement part for specific Maytag, Amana, Whirlpool dryer models. It includes multiple replacement glides that support the movement of the tub. As it rotates during the cycle, the tub experiences friction that the bearings help manage.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO 279769 Dryer Thermostat Kit: A Reliable Solution for Your Dryer Needs
Product Description
Restore proper dryer heat regulation and safety with the XPARTCO 279769 Dryer Thermostat Kit. This Thermal Cut-Off Kit is a replacement part for specific Kenmore, Whirlpool dryer models. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels. The kit typically includes one high-limit thermostat and one thermal cut-off fuse. These components are critical for preventing potential fire hazards by ensuring that the dryer operates within safe temperature ranges.
Replaces Part Numbers
279769, 2004, 279548, 2796769, 279769VP, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, L250-80F, AH334278, EA334278, PD00002485, EAP334278, AP3094224, PS334278.
Compatibility
This replacement dryer thermostat kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.
Example compatible models include (but are not limited to):Whirlpool WED4800XQ, WED4815EW1Maytag MEDC215EW1Kenmore 110.6012010
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Designed to match OEM temperature regulation
🌡️ Accurate Heat Cycling – Helps maintain proper drying temperatures
🔥 Overheat Protection – Reduces risk of thermal fuse failures
💰 Cost-Effective Repair – Reliable alternative to OEM thermostat kits
🛡️ Fixes Common Issues – Resolves no heat, overheating, and long dry times
📐 Product Specification
Part Number: 279769
Component Type: Dryer Thermostat Kit
Includes: Operating thermostat and high-limit thermostat
Application: Heater housing / exhaust temperature control
Material: Heat-resistant metal thermostat housings
Mounting: Screw-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect dryer power.
Remove the rear access panel.
Locate the thermostats on the heater housing.
Disconnect wiring and remove old thermostats.
Install the new XPARTCO 279769 components in the same positions.
Reconnect wiring, reinstall panel, and restore power.
Run a test cycle to confirm proper heating.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore proper dryer temperature control and safety — Add to Cart Now for a dependable, budget-friendly repair!
Understanding the Importance of the 279769 Thermostat
The XPARTCO 279769 Dryer Thermostat is crucial for maintaining the right temperature in your dryer. This thermostat monitors the heat, ensuring your clothes dry effectively without overheating. When the thermostat malfunctions, it can lead to inefficiency in drying or even potential fire hazards. By installing this reliable thermostat, you not only increase the lifespan of your dryer but also ensure safe operation, making it a valuable investment for your home.
Easy Installation Process
Replacing your old thermostat with the XPARTCO 279769 is straightforward, which is great for DIY enthusiasts. You don’t need extensive tools or technical knowledge to complete the installation. Just follow the provided instructions, and you’ll have your dryer back up and running in no time. This ease of installation saves you both time and money by eliminating the need for professional repairs, allowing you to enjoy your appliances worry-free.
Enhanced Performance and Energy Efficiency
By incorporating the XPARTCO 279769 Dryer Thermostat into your dryer system, you enhance its overall performance significantly. This part helps regulate temperature effectively, reducing energy consumption. Consequently, you save on electricity bills while also doing your part for the environment. The thermostat is designed for durability, meaning it will keep your dryer operating at peak efficiency for years to come, so you can enjoy dry clothes without the extra cost.
XPARTCO 279973 Dryer Thermostat Kit
The XPARTCO 279973 is an aftermarket replacement dryer thermostat and thermal cut-off kit compatible with a wide range of Whirlpool-family electric dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, and Admiral. The kit contains two components — the high-limit thermostat (L295-80F) and the thermal cut-off fuse — both located on the heating element housing. Together they protect the dryer's heating element from overheating: the high-limit thermostat monitors element temperature and cuts power if it exceeds safe levels, then resets when cooled. The thermal cut-off fuse is a backup one-time device that permanently opens the circuit if the thermostat fails to protect the element.
Both parts are mounted on the side of the heating element housing and can be accessed through the dryer's back panel. The thermal cut-off fuse is a non-resettable one-time device — once it opens, it must be replaced. The 279973 kit includes both parts, an instruction sheet, and hardware. It directly replaces 3391913, 3404151, 3404152, 3977395, 8318314, 897710, 279973VP, AP3094323, and several additional cross-reference numbers. Note: this kit is for electric dryers only. Installs in 20–30 minutes with basic hand tools.
Quick Answer
The XPARTCO 279973 Dryer Thermostat Kit fixes Whirlpool-family electric dryers with no heat, overheating, or a dryer that shuts off too early. Kit includes the L295-80F high-limit thermostat (auto-reset, opens at 295°F) and the thermal cut-off fuse (352°F, one-time). Both mount on the heating element housing. Electric dryers only. Replaces 3391913, 3404151, 8318314, 897710, AP3094323. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, and Admiral.
Common Problems This Kit Fixes
Dryer produces no heat — thermal cut-off fuse or high-limit thermostat has failed
Dryer overheats — clothes or drum too hot at the end of a cycle
Dryer shuts off early before clothes are dry
Dryer takes multiple cycles or very long time to dry clothes
Repeated no-heat failures — underlying overheating condition affecting the element housing components
Dryer tumbles normally but produces no heat at all
What's in the Kit
Part 1 of 2
High-Limit Thermostat (L295-80F)
Opens at 295°F — cuts power to the heating element if temperature exceeds safe levels · Auto-resets when cooled · Located on the heating element housing · Should show closed continuity (near-zero resistance) at room temperature
Part 2 of 2
Thermal Cut-Off Fuse (352°F)
Opens at 352°F — one-time backup safety device on the heating element housing · Permanently interrupts power to the heating element if the high-limit thermostat fails to protect it · Cannot be reset — must be replaced if blown · Should show closed continuity at room temperature when working
Replaces Part Numbers
This thermostat kit directly replaces the following OEM and cross-reference part numbers:
279973, 279973VP, 3391913, 3404151, 3404152, 3977395, 8318314, 897710, ER279973, PD00002626, EAP334387, AWP39286, AH334387, AP3094323, EA334387, PS334387.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermostat kit is compatible with select electric dryers only from the following brands:
Whirlpool electric dryers (Duet, Cabrio, and standard series)
Kenmore / Sears electric dryers (Whirlpool-built models)
Maytag electric dryers
KitchenAid electric dryers
Amana electric dryers
Inglis electric dryers
Roper electric dryers
Admiral electric dryers
Important: This kit is for electric dryers only. Gas dryers use a different burner assembly and require a different thermostat kit (XP6974 for Whirlpool-family gas dryers). Always verify your dryer type and model number before ordering. Also: if the thermal cut-off fuse has blown, always check for a clogged exhaust vent before replacing — a blocked vent is the most common root cause of overheating and repeated fuse failures.
Key Features
2-part kit — high-limit thermostat and thermal cut-off fuse, both on the heating element housing
High-limit thermostat (L295-80F) — opens at 295°F to cut element power, auto-resets when cooled
Thermal cut-off fuse (352°F) — one-time backup safety device; permanently opens if thermostat fails to protect the element
Both parts located on the heating element housing — accessible from the dryer back panel
Replacing both together ensures complete thermal protection is restored on the element housing
Replaces 3391913, 3404151, 8318314, 897710, AP3094323, and over 10 additional cross-reference numbers
Electric dryers only — not for gas dryer models
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, and Admiral electric dryers
Aftermarket replacement built to OEM-equivalent quality standards
Installs in 20–30 minutes with basic hand tools
Product Specifications
Kit Part Number
279973
Condition
Aftermarket Replacement
Application
Electric Dryers Only
Kit Includes
1x High-Limit Thermostat (L295-80F), 1x Thermal Cut-Off Fuse (352°F), hardware, instruction sheet
High-Limit Thermostat Rating
L295-80F — opens at 295°F, resets at 215°F — auto-resets
Thermal Cut-Off Fuse Trip Temp
352°F — one-time, non-resettable
Location
Heating element housing (both parts)
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Inglis, Roper, Admiral
Installation Notes
⚠️ Unplug Dryer Before Starting — Electric Dryers Only Disconnect power before beginning. Remove the back panel of the dryer by unscrewing the perimeter screws to expose the heating element housing. Both the high-limit thermostat and thermal cut-off fuse are mounted on the side of the heating element housing — the thermostat is typically the larger component and the thermal cut-off fuse is smaller. Test each component with a multimeter before removing (both should show closed continuity at room temperature; the failed one will read open). Photograph the wiring before disconnecting. Disconnect the wires, remove the mounting screws, and install the new components in the same positions. Reconnect the wires and mounting screws, reinstall the back panel, restore power, and run a test cycle to confirm heat. Tip: Before running the dryer, clean the full length of the exhaust duct — a clogged vent is the most common cause of overheating and a blown thermal cut-off fuse. Tools needed: Phillips screwdriver, 1/4" nut driver, multimeter.
Frequently Asked Questions
What is the difference between the high-limit thermostat and the thermal cut-off fuse in this kit?
The high-limit thermostat (L295-80F) is a resettable safety switch that opens at 295°F to cut power to the heating element and resets automatically when the temperature drops. It is the primary protection against overheating during normal operation. The thermal cut-off fuse is a one-time backup device rated at 352°F — it permanently opens the circuit if the heating element temperature climbs beyond the point the thermostat should have caught. Once the cut-off fuse opens, it must be replaced; it does not reset on its own. If the cut-off fuse has blown, it usually means the high-limit thermostat also failed to do its job and should be replaced at the same time — which is exactly what this kit provides.
How do I test these parts with a multimeter?
Unplug the dryer and remove the back panel to access the heating element housing. Disconnect each component from the wiring and probe both terminals with a multimeter set to continuity or resistance mode. At room temperature, both the high-limit thermostat and the thermal cut-off fuse should show closed continuity (near-zero resistance). Any component that reads open circuit (no continuity) has failed and needs to be replaced. The thermal cut-off fuse reads open even after it cools — it is non-resettable. The high-limit thermostat may read open at room temperature if it has failed internally rather than by an overheat trip.
How is the 279973 kit different from the XP6974 thermostat kit?
The 279973 is a 2-part kit — high-limit thermostat and thermal cut-off fuse — designed specifically for the heating element housing of Whirlpool-family electric dryers. The XP6974 is a 4-part kit — cycling thermostat, thermal fuse, high-limit thermostat, and thermal cut-off — designed for Whirlpool-family gas and electric dryers, covering both the exhaust duct components and the burner/element housing components. If your electric dryer is showing no-heat and you need only the heating element housing components, the 279973 kit covers exactly those two parts. If you want to replace all thermal components in one repair, the XP6974 covers a broader set.
Why does the thermal cut-off fuse keep blowing?
If the thermal cut-off fuse blows repeatedly after replacement, it almost always means there is an underlying overheating condition causing the heating element housing to run hotter than it should. The most common cause is a clogged or restricted exhaust vent — lint accumulation in the duct reduces airflow, trapping heat inside the dryer cabinet and around the element. Other causes include a failed cycling thermostat that is not regulating element temperature correctly, a stuck heating element relay, or a dryer in an enclosed space with inadequate ventilation. Always clean the full exhaust duct and check the cycling thermostat (WP3387134) before replacing the thermal cut-off fuse a second time.
Is this an OEM or aftermarket part?
This is an aftermarket replacement kit built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the temperature ratings and specifications of the original 279973 high-limit thermostat and thermal cut-off fuse kit.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
279457 Dryer Heating Element Wire Kit - Compatible with Whirlpool, Maytag, Kenmore
Product Description
Restore your dryer’s heating functionality with the 279457 Dryer Heating Element Wire Kit. This high-quality replacement kit is designed for select Whirlpool, Maytag, Kenmore, Amana, Admiral, and Jenn-Air dryers, repairing damaged or burnt wiring connections to the heating element. It ensures reliable heat delivery at a cost-effective price, addressing issues like no heat or inconsistent heating.
Note: Includes one high-temperature wires and one wire connector (female spade connectors, 5/16"). Disconnect power before installation. Verify compatibility with your dryer model.
Replaces part numbers: 279457, 279457VP, T2502, AP3134638, PS334206.
Compatibility:
Compatible with select dryer models, including but not limited to:
Whirlpool: WED4800BQ0, WED4800XQ0, WED4850BW0, WED4900XW0, WED5321SQ0
Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, Estate (verify compatibility with heating element 4391960)
Common models: Kenmore 110.60072990, Maytag MEDC400VW0
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, Kenmore, Amana, Admiral, Jenn-Air, Roper, and Estate dryers.
🔧 Specifications: kit with one high-temperature wires and one wire nuts, 5/16" female spade connectors.
💪 Reliable Performance: Ensures secure electrical connections for consistent heating element operation.
🛠️ Easy Installation: Requires wire cutters, strippers, and screwdriver; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves no heat, inconsistent heating, or burnt wire issues.
Product Specification
Part Number: Choice 279457
Component Type: Dryer heating element wire kit
Material: Heat-resistant metal wires, plastic-insulated connectors
Connector Type: 5/16" female spade connectors
Operating Conditions: Suitable for high-temperature dryer environments
Compliance: Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the dryer from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your dryer heating efficiently today!
Add to cart now for a reliable fix!
XPARTCO WL49X20360 Washer Motor Speed Sensor Kit – Compatible with GE & Hotpoint Washers
Product Description
Restore accurate motor speed detection and reliable washer operation with the XPARTCO WL49X20360 Washer Motor Speed Sensor Kit. This high-quality aftermarket replacement kit monitors the washer motor’s rotation speed and sends feedback to the control board for proper agitation and spin performance. A faulty speed sensor can cause error codes, no spin, irregular agitation, or cycle interruptions. Replacing it with this XPARTCO kit helps restore smooth operation and consistent wash cycles.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
WL49X20360, WH12X10515, 3031241, PD00025952, EAP8768455, AP5803767, PS8768455.
Compatibility
This replacement washer motor speed sensor kit fits select GE and Hotpoint washers.
Example compatible models include (but are not limited to):
GE GTW465ASNWW, GTW485ASJWS
Hotpoint HTW240ASKWS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Matches OEM fit and signal performance
⚙️ Accurate Motor Speed Feedback – Ensures proper agitation and spin control
🛠️ Direct-Fit Design – No modifications required
💪 Durable Electronic Components – Built for long-term reliability
💰 Cost-Effective Repair – Reliable alternative to OEM sensor kits
📐 Product Specification
Part Number: XPWL49X20360
Component Type: Washer Motor Speed Sensor Kit
Function: Motor rotation and speed detection
Application: Washer drive motor feedback system
Includes: Speed sensor and mounting hardware (as applicable)
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Access the motor area from the bottom or rear of the washer.
Locate and disconnect the old motor speed sensor.
Remove mounting hardware and replace with the new XPARTCO WL49X20360 sensor.
Reconnect wiring and secure the sensor.
Reassemble panels, restore power, and run a test cycle.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate washer motor control and dependable performance — Add to Cart Now for a reliable, budget-friendly repair!
XPARTCO 4387535 Refrigerator Relay and Overload Kit – Compatible with Whirlpool, KitchenAid, Kenmore, and Maytag Refrigerators
Product Description
Restore reliable compressor startup and cooling performance with the XPARTCO 4387535 Refrigerator Relay and Overload Kit. This high-quality aftermarket kit includes both the start relay and overload protector to safely energize the compressor and protect it from overheating or electrical overload. A failed relay or overload can cause clicking sounds, intermittent cooling, or a refrigerator that won’t start. Replacing both components together ensures proper compressor operation and long-term reliability.
Replaces Part Numbers
4387535, 14210139, 2154760, 2159596, 4357210, 4387767, 586234, PD00003203, EAP371273, AH371273, AP3108472, EA371273, PS371273.
Compatibility
This replacement relay and overload kit fits select Whirlpool, KitchenAid, Maytag, Amana, Crosley, and Kenmore refrigerators.
Example compatible models include (but are not limited to):Whirlpool ED5FHGXMQ00, WRS321SDHZ08KitchenAid KSCS25FVBL02Kenmore 106.56532400
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM electrical startup performance
🔌 Complete Compressor Start Kit – Includes start relay and overload protector
🔇 Reduces Clicking & No-Start Issues – Helps restore proper compressor startup
💰 Cost-Effective Solution – Reliable alternative to expensive OEM kits
🛡️ Fixes Common Issues – Solves refrigerator not cooling, clicking noises, or intermittent compressor operation
📐 Product Specification
Part Number: 4387535
Component Type: Refrigerator Compressor Relay & Overload Kit
Includes: Start relay and overload protector
Mounting: Direct-fit onto compressor terminals
Application: Compressor start and thermal protection
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool.
Steps:
Disconnect power and remove the rear lower access panel.
Locate the existing relay and overload on the compressor terminals.
Carefully remove the old components.
Install the new XPARTCO 4387535 relay and overload kit.
Reinstall the access panel and restore power.
Allow several minutes for the compressor to start.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore dependable refrigerator cooling — Add to Cart Now for a reliable, budget-friendly compressor start solution!
