XPARTCO 279769 Dryer Thermostat Kit: A Reliable Solution for Your Dryer Needs
Product Description
Restore proper dryer heat regulation and safety with the XPARTCO 279769 Dryer Thermostat Kit. This Thermal Cut-Off Kit is a replacement part for specific Kenmore, Whirlpool dryer models. This safety kit is designed to protect the dryer from overheating by interrupting the heat source when the dryer air temperature reaches dangerously high levels. The kit typically includes one high-limit thermostat and one thermal cut-off fuse. These components are critical for preventing potential fire hazards by ensuring that the dryer operates within safe temperature ranges.
Replaces Part Numbers
279769, 2004, 279548, 2796769, 279769VP, 2821, 3387812, 3389946, 3398671, 3977394, 695563, 80001, L250-80F, AH334278, EA334278, PD00002485, EAP334278, AP3094224, PS334278.
Compatibility
This replacement dryer thermostat kit fits select Whirlpool, Maytag, Kenmore, Amana, Estate, Roper, and Crosley electric dryers.
Example compatible models include (but are not limited to):Whirlpool WED4800XQ, WED4815EW1Maytag MEDC215EW1Kenmore 110.6012010
Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Designed to match OEM temperature regulation
🌡️ Accurate Heat Cycling – Helps maintain proper drying temperatures
🔥 Overheat Protection – Reduces risk of thermal fuse failures
💰 Cost-Effective Repair – Reliable alternative to OEM thermostat kits
🛡️ Fixes Common Issues – Resolves no heat, overheating, and long dry times
📐 Product Specification
Part Number: 279769
Component Type: Dryer Thermostat Kit
Includes: Operating thermostat and high-limit thermostat
Application: Heater housing / exhaust temperature control
Material: Heat-resistant metal thermostat housings
Mounting: Screw-mounted
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock.
Steps:
Disconnect dryer power.
Remove the rear access panel.
Locate the thermostats on the heater housing.
Disconnect wiring and remove old thermostats.
Install the new XPARTCO 279769 components in the same positions.
Reconnect wiring, reinstall panel, and restore power.
Run a test cycle to confirm proper heating.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore proper dryer temperature control and safety — Add to Cart Now for a dependable, budget-friendly repair!
Understanding the Importance of the 279769 Thermostat
The XPARTCO 279769 Dryer Thermostat is crucial for maintaining the right temperature in your dryer. This thermostat monitors the heat, ensuring your clothes dry effectively without overheating. When the thermostat malfunctions, it can lead to inefficiency in drying or even potential fire hazards. By installing this reliable thermostat, you not only increase the lifespan of your dryer but also ensure safe operation, making it a valuable investment for your home.
Easy Installation Process
Replacing your old thermostat with the XPARTCO 279769 is straightforward, which is great for DIY enthusiasts. You don’t need extensive tools or technical knowledge to complete the installation. Just follow the provided instructions, and you’ll have your dryer back up and running in no time. This ease of installation saves you both time and money by eliminating the need for professional repairs, allowing you to enjoy your appliances worry-free.
Enhanced Performance and Energy Efficiency
By incorporating the XPARTCO 279769 Dryer Thermostat into your dryer system, you enhance its overall performance significantly. This part helps regulate temperature effectively, reducing energy consumption. Consequently, you save on electricity bills while also doing your part for the environment. The thermostat is designed for durability, meaning it will keep your dryer operating at peak efficiency for years to come, so you can enjoy dry clothes without the extra cost.
XPARTCO WL49X20360 Washer Motor Speed Sensor Kit – Compatible with GE & Hotpoint Washers
Product Description
Restore accurate motor speed detection and reliable washer operation with the XPARTCO WL49X20360 Washer Motor Speed Sensor Kit. This high-quality aftermarket replacement kit monitors the washer motor’s rotation speed and sends feedback to the control board for proper agitation and spin performance. A faulty speed sensor can cause error codes, no spin, irregular agitation, or cycle interruptions. Replacing it with this XPARTCO kit helps restore smooth operation and consistent wash cycles.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
WL49X20360, WH12X10515, 3031241, PD00025952, EAP8768455, AP5803767, PS8768455.
Compatibility
This replacement washer motor speed sensor kit fits select GE and Hotpoint washers.
Example compatible models include (but are not limited to):
GE GTW465ASNWW, GTW485ASJWS
Hotpoint HTW240ASKWS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement Kit – Matches OEM fit and signal performance
⚙️ Accurate Motor Speed Feedback – Ensures proper agitation and spin control
🛠️ Direct-Fit Design – No modifications required
💪 Durable Electronic Components – Built for long-term reliability
💰 Cost-Effective Repair – Reliable alternative to OEM sensor kits
📐 Product Specification
Part Number: XPWL49X20360
Component Type: Washer Motor Speed Sensor Kit
Function: Motor rotation and speed detection
Application: Washer drive motor feedback system
Includes: Speed sensor and mounting hardware (as applicable)
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver
⚠️ Safety First: Unplug the washer before servicing to avoid electrical shock.
Basic Steps:
Disconnect washer power.
Access the motor area from the bottom or rear of the washer.
Locate and disconnect the old motor speed sensor.
Remove mounting hardware and replace with the new XPARTCO WL49X20360 sensor.
Reconnect wiring and secure the sensor.
Reassemble panels, restore power, and run a test cycle.
⏱️ Time Required: 20–30 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate washer motor control and dependable performance — Add to Cart Now for a reliable, budget-friendly repair!
(2 Pack) 306508CM Dryer Front Glide Kit
Includes rivets and cushion.
Fits specific Maytag dryer models.
Replaces Part Numbers: 306508, 1309, 3-12941, 3-6508, 306508VP, 312941, AH1804752, DE747, EA1804752, K35-603, AP4037304, PS1804752.
Description: This Tumbler Bearing Kit is a replacement part for specific Maytag, Amana, Whirlpool dryer models. It includes multiple replacement glides that support the movement of the tub. As it rotates during the cycle, the tub experiences friction that the bearings help manage.
This is an aftermarket part that can be used as a replacement for the OEM part.
XPARTCO 4387535 Refrigerator Relay and Overload Kit – Compatible with Whirlpool, KitchenAid, Kenmore, and Maytag Refrigerators
Product Description
Restore reliable compressor startup and cooling performance with the XPARTCO 4387535 Refrigerator Relay and Overload Kit. This high-quality aftermarket kit includes both the start relay and overload protector to safely energize the compressor and protect it from overheating or electrical overload. A failed relay or overload can cause clicking sounds, intermittent cooling, or a refrigerator that won’t start. Replacing both components together ensures proper compressor operation and long-term reliability.
Replaces Part Numbers
4387535, 14210139, 2154760, 2159596, 4357210, 4387767, 586234, PD00003203, EAP371273, AH371273, AP3108472, EA371273, PS371273.
Compatibility
This replacement relay and overload kit fits select Whirlpool, KitchenAid, Maytag, Amana, Crosley, and Kenmore refrigerators.
Example compatible models include (but are not limited to):Whirlpool ED5FHGXMQ00, WRS321SDHZ08KitchenAid KSCS25FVBL02Kenmore 106.56532400
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM electrical startup performance
🔌 Complete Compressor Start Kit – Includes start relay and overload protector
🔇 Reduces Clicking & No-Start Issues – Helps restore proper compressor startup
💰 Cost-Effective Solution – Reliable alternative to expensive OEM kits
🛡️ Fixes Common Issues – Solves refrigerator not cooling, clicking noises, or intermittent compressor operation
📐 Product Specification
Part Number: 4387535
Component Type: Refrigerator Compressor Relay & Overload Kit
Includes: Start relay and overload protector
Mounting: Direct-fit onto compressor terminals
Application: Compressor start and thermal protection
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Unplug the refrigerator before servicing. Compressor components may be hot—allow time to cool.
Steps:
Disconnect power and remove the rear lower access panel.
Locate the existing relay and overload on the compressor terminals.
Carefully remove the old components.
Install the new XPARTCO 4387535 relay and overload kit.
Reinstall the access panel and restore power.
Allow several minutes for the compressor to start.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Restore dependable refrigerator cooling — Add to Cart Now for a reliable, budget-friendly compressor start solution!
