Search results for "Defrost Thermostat"

ERP 3977767 Dryer Hi Limit Thermostat 250 -80F Limit Thermostat. Fits specific Maytag, Kenmore, Whirlpool dryer models. Replaces Part Number: WP3977767, 3977767, 3399693, ER3977767, SET185, TJ90SET185, WP3977767VP, AP6009043, PS11742185. Description: This Hi-Limit Thermostat is a replacement part for specific Maytag, Kenmore, Whirlpool dryer models. It functions as a critical safety device that monitors and controls the temperature within the dryer, preventing it from overheating. When the dryer reaches a temperature that is too high, this thermostat will cut off the power to the heating element to mitigate the risk of fire.   This is an aftermarket part that can be used as a replacement for the OEM part.

Read more less

XPARTCO 35001191 Dryer Thermistor – Replaces WP35001191 – Compatible with Whirlpool, Maytag & Kenmore Dryers Product Description Maintain accurate temperature control and efficient drying with the XPARTCO 35001191 Dryer Thermistor. This Dryer Thermistor is a replacement part for specific Whirlpool, Kenmore, Maytag dryer models, that is responsible for monitoring and controlling the temperature within the dryer drum. This sensor prevents overheating or under-heating, which can affect drying performance and fabric care. The thermistor communicates temperature readings to the dryer's control board, which then adjusts the heat accordingly to maintain the desired temperature settings. Replaces Part Numbers WP35001191, 35001191, 1185513, PD00003059, EAP11741828, AP6008688, PS11741828.  Compatibility This replacement dryer thermistor fits select Whirlpool, Maytag, Kenmore, Amana, Crosley, and Estate electric dryers. Example compatible models include (but are not limited to):Whirlpool WED4815EW1, Maytag MEDC215EW1, Kenmore 110.65132411. Always verify your dryer’s model number before ordering.Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature-sensing accuracy 🌡️ Precise Heat Regulation – Helps control dryer temperature efficiently 🔧 Reliable Sensor Performance – Sends accurate feedback to control board 💰 Cost-Effective Repair – Quality alternative to OEM thermistors 🛡️ Fixes Common Issues – Resolves overheating, no heat, long dry times, or error codes 📐 Product Specification Part Number: 35001191 Component Type: Dryer Thermistor / Temperature Sensor Application: Exhaust temperature monitoring Material: Heat-resistant sensor body with wire leads Mounting: Screw-mounted on blower housing Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver ⚠️ Safety First: Always unplug the dryer before servicing to prevent electrical shock. Steps: Disconnect dryer power and remove the rear panel. Locate the thermistor on the blower housing. Disconnect the wiring harness and remove mounting screws. Install the new XPARTCO 35001191 thermistor. Reconnect wiring, reinstall panel, and restore power. Run a test cycle to confirm proper temperature regulation. ⏱️ Time Required: 10–15 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore accurate dryer temperature control — Add to Cart Now for a dependable, budget-friendly repair!

Read more less

XPARTCO WE04X10118 Dryer High Limit Thermostat Replaces Part Numbers: WE04X10118, 1089012, AH959918, EA959918, AP3794592, PS959918. Description: This High Limit Thermostat is a replacement part for specific GE dryer models. This safety component is designed to monitor and regulate the dryer's temperature, preventing it from exceeding safe levels. Mounted on the heating chamber or exhaust duct, the high limit thermostat shuts off the heat source or the dryer itself if it detects temperatures that are too high, helping to prevent overheating and potential fire hazards.   This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

XPARTCO DC47-00018A Dryer Hi-Limit Thermostat - Compatible with Samsung, Kenmore Dryers Product Description Prevent overheating in your dryer with the replacement DC47-00018A Dryer Hi-Limit Thermostat. This high-limit thermostat is designed for select Samsung and Kenmore dryers, shutting off the heating element or burner at 260°F and restarting at 50°F to ensure safe operation. It addresses issues like no heat, overheating, or premature shutoff, offering a cost-effective alternative to OEM parts. Note: Includes one high-limit thermostat with two 1/4" male spade terminals. Disconnect power before installation. Replaces part numbers: DC47-00018A, AP4201898, 1122485, PS4205217. WP35001092, 35001092, PD00004704, EAP11741822, AP6008682, PS11741822. Compatibility: Compatible with models including but not limited to: Samsung: DV203AES, DV209AEW/XAA-0000, DV210AEW/XAA, DV42H5000EW/A3, DV45H7000EW/A2, DV48H7400EW/A2, DV5471AEP/XAA Kenmore: 40289032010, 40289032011, 40299032010, 40299032012 Verify your model number or contact our support team for assistance. Key Features: ✅ Brand and Models Compatibility: Fits select Samsung, Kenmore, and Whirlpool dryers. 🔥 Specifications: replacement high-limit thermostat, opens at 260°F, closes at 50°F. 💰 Cost-Effective Alternative: Offers OEM-equivalent performance at a lower price. 🛠️ Easy Installation: Requires Phillips screwdriver, pliers, work gloves; typically installed in 15–20 minutes. 🛡️ Effective Fixes: Resolves no heat, overheating, or premature shutoff issues. Product Specification Part Number: XPARTCO DC47-00018A Component Type: High-limit thermostat Material: Metal and plastic Electrical Specs: L260-50F. 125/250V. 25A. Mounting: Two 1/4" male spade terminals, mounts on heater assembly Operating Conditions: Suitable for high-temperature dryer environments Compliance: Prop 65 warning for California Installation Notes: Safety First: Disconnect the dryer from the power source before installation. Shop for high-quality replacement appliance parts with a 30-day return policy. Keep your dryer safe and efficient today! Add to cart now for a budget-friendly fix!

Read more less

XPARTCO 6931EL3001E Dryer Thermostat – Compatible with LG and Kenmore Dryers Product Description Maintain proper dryer safety and temperature control with the 6931EL3001E Dryer Thermostat. This replacement part monitors and regulates dryer temperature to prevent overheating and ensure efficient drying cycles. A faulty thermostat may cause your dryer to stop heating, overheat, or shut off unexpectedly. Replacing it restores reliable performance and helps extend the life of your dryer. Replaces Part Numbers 6931EL3001E, 1268363, 6931EL3001B, 6931EL3001C, AH3530481, EA3530481, PD00023869, EAP3530481, AP4440977, PS3530481, L125-31C, 503475. Compatibility This dryer thermostat is compatible with select LG and Kenmore dryer models. Example compatible models include (but are not limited to): LG DLE2516W, DLE7177WM, and Kenmore 796.80272900. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Broad Compatibility – Fits select LG and Kenmore dryers 🔒 Reliable Safety – Prevents overheating by regulating dryer temperature 💰 Cost-Effective Replacement – OEM-equivalent performance at a lower price 🛠️ DIY-Friendly – Quick installation with basic tools 🛡️ Fixes Common Issues – Restores heating, prevents overheating, and fixes dryer shutdown problems 📐 Product Specification Part Number: XP6931EL3001E Component Type: Dryer Thermostat Material: High-heat resistant metal and thermal components Mounting: Direct replacement, mounts on heating element housing Operating Conditions: Designed for residential dryers Compliance: OEM-equivalent performance and safety standards 🛠️ Installation Notes Tools Needed: Phillips screwdriver, flathead screwdriver, needle-nose pliers ⚠️ Safety First: Always disconnect power before starting repairs to avoid electrical shock. Steps: Unplug dryer and remove back access panel. Locate thermostat on heating element housing. Disconnect wire terminals from the old thermostat. Remove screws holding it in place and replace with the new thermostat. Reconnect wires, secure the component, and reinstall the access panel. Restore power and test dryer operation. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore your dryer’s safe operation today — Add to Cart Now for fast, budget-friendly repair!

Read more less

ERP DC47-00015A Dryer Thermostat Fits Specific Samsung, Whirlpool Dryer models. non-resettable dryer thermostat. Description: This Dryer Thermal Fuse is a exact replacement Part that is situated on the heating element housing for specific Samsung, Whirlpool dryer models. It meticulously measures the air temperature within the dryer drum and adjusts the heat to maintain the optimal drying temperature. In situations where your dryer doesn't start, fails to dry clothes effectively, or doesn't produce heat, a faulty thermal fuse might be the cause. Replaces Part Numbers:DC47-00015A, 2068544, 35001091, 1122484, AH2038382, DC47-00015A, EA2038382, AP4201892, PS4205212, AP4045835, PS2038382. This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: California’s Proposition 65 

Read more less

XPARTCO 6931EL3001F Dryer Hi-Limit Thermostat The XPARTCO 6931EL3001F is an aftermarket replacement dryer rear hi-limit heater thermostat compatible with select LG and Kenmore electric and gas dryers. The hi-limit thermostat is a safety switch mounted on the heater housing that monitors the temperature at the heating element. If the heater temperature exceeds the safe operating limit, the thermostat opens its contacts to cut power to the heating element, protecting the dryer and its contents from overheating. When cooled, the thermostat resets automatically — but if it fails internally, it may remain open permanently, causing the dryer to produce no heat despite the thermal fuse and other components being intact. Rated L125-31C, 250V, 25A, this 3-terminal thermostat measures 2"L x 1-3/4"W x 1-1/4"H with approximately 1-5/8" between mounting holes (center to center). It is constructed from metal and plastic in gray/black and mounts directly on the heater housing. It directly replaces 1377779, AP5072172, AH3530482, EA3530482, EAP3530482, PS3530482, and PD00023316. Often replaced together with the 6931EL3003D thermal fuse — both mount on the heater housing and work as a system to protect the dryer from overheating. Installs in 15–20 minutes with basic hand tools. Quick Answer The XPARTCO 6931EL3001F Dryer Hi-Limit Thermostat fixes LG and Kenmore dryers with no heat where the thermostat has failed open. Rated L125-31C, 250V/25A, 3 terminals. 2"L x 1-3/4"W x 1-1/4"H, ~1-5/8" between mounting holes. Mounts on heater housing. Test with multimeter — should show closed continuity at room temperature. Often replaced together with 6931EL3003D thermal fuse. Replaces 1377779, AP5072172, AH3530482, EA3530482, EAP3530482, PS3530482. Common Problems This Part Fixes Dryer produces no heat — hi-limit thermostat has failed open and is permanently interrupting the heater circuit Dryer takes much longer than normal to dry a load Dryer tumbles normally but generates no heat during the cycle No heat even after the thermal fuse has already been replaced — thermostat also failed Dryer overheating intermittently — thermostat not opening at the correct temperature Multimeter test shows open circuit (no continuity) across the thermostat at room temperature Replaces Part Numbers This hi-limit thermostat directly replaces the following OEM and cross-reference part numbers: 6931EL3001F, 1377779, AH3530482, ALG51960, EA3530482, EAP3530482, AP5072172, PD00023316, PS3530482 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This hi-limit thermostat is compatible with select LG and Kenmore electric and gas dryers. Compatible models include LG DLE, DLG, DLEX, DLGX, and DLB series dryers, and Kenmore 796-series dryers built on the LG platform. LG electric dryers — DLE series (DLE2050W, DLE3777W, DLE5955W and related models) LG electric dryers — DLEX series (select models) LG gas dryers — DLG series (DLG2051W, DLG3788W and related models) LG gas dryers — DLGX series (select models) LG electric and gas dryers — DLB series (select models) Kenmore / Sears dryers — 796-series (LG-built models) Tip: When replacing the 6931EL3001F thermostat, also replace the 6931EL3003D thermal fuse at the same time. Both mount on the heater housing and are commonly replaced together — an overheating event that causes one to fail typically stresses both. Key Features Hi-limit heater thermostat — safety switch that cuts power to the heating element if heater temperature exceeds safe limits Auto-resets when cooled — but a failed thermostat that remains open causes permanent no-heat Rated L125-31C, 250V, 25A — correct specifications for compatible LG and Kenmore dryers 3-terminal design — matches the original wiring configuration on compatible heater housings Dimensions: 2"L x 1-3/4"W x 1-1/4"H; ~1-5/8" between mounting holes (center to center) Metal and plastic construction (gray/black) — heat-resistant materials for heater housing application Mounts directly on the heater housing — accessible from the dryer back panel Often replaced together with 6931EL3003D thermal fuse for a complete heater housing thermal repair Test with multimeter before replacing — should show closed continuity at room temperature Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 15–20 minutes with basic hand tools Product Specifications Part Number 6931EL3001F Part Type Dryer Rear Hi-Limit Heater Thermostat Condition Aftermarket Replacement Application LG and Kenmore Electric and Gas Dryers Thermostat Rating L125-31C — auto-resets after cooling Voltage 250V Amperage 25A Terminals 3-terminal Dimensions 2"L x 1-3/4"W x 1-1/4"H Mounting Hole Spacing Approx. 1-5/8" center to center Color Gray / Black Material Metal / Plastic Location Heater housing (rear of dryer) Normal Behavior Closed continuity at room temperature Often Replaced With 6931EL3003D Thermal Fuse Compatible Brands LG, Kenmore (LG-built) Installation Notes ⚠️ Unplug Dryer and Shut Off Gas Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. Remove the back panel of the dryer by unscrewing the perimeter screws to access the heater housing. The 6931EL3001F thermostat is mounted on the heater housing — it is the 3-terminal component with gray/black housing. Before removing it, test it with a multimeter: disconnect the wires and probe the terminals. At room temperature a working thermostat shows closed continuity. An open reading confirms failure. Photograph the 3-wire connections before disconnecting — reconnecting in the correct positions is important. Remove the 2 mounting screws and lift the old thermostat off. Install the new thermostat in the same position with the 2 mounting screws and reconnect the wires in the same positions. While the heater housing is accessible, also test and replace the 6931EL3003D thermal fuse if needed. Reinstall the back panel, restore power, and run a test heat cycle. Tools needed: Phillips screwdriver, multimeter. Frequently Asked Questions What is the difference between the 6931EL3001F thermostat and the 6931EL3003D thermal fuse? Both are mounted on the heater housing and protect the dryer from overheating, but they work differently. The 6931EL3001F is a resettable hi-limit thermostat rated L125-31C — it opens when the heater temperature gets too high and resets automatically when cooled. The 6931EL3003D is a one-time thermal fuse that permanently interrupts the circuit if the temperature exceeds its rated limit — once blown, it cannot reset and must be replaced. Both should show closed continuity at room temperature when working. Because both are on the heater housing and experience the same thermal stress, replacing both at the same time is recommended. How do I test the 6931EL3001F thermostat with a multimeter? Unplug the dryer and disconnect all three wires from the thermostat terminals. Set your multimeter to continuity or resistance mode. At room temperature, a working 6931EL3001F thermostat should show closed continuity (near-zero resistance) across its contacts. If your multimeter reads open circuit (no continuity / OL), the thermostat has failed and needs replacement. Since this thermostat auto-resets when cooled, always test at room temperature — testing while the dryer is still warm may give a false open reading if the thermostat has legitimately opened due to heat. My LG dryer has no heat but the thermal fuse is good — could it be the thermostat? Yes — when the thermal fuse tests good but there is still no heat, the hi-limit thermostat (6931EL3001F) is the next most common culprit. A thermostat that has failed internally may remain permanently open even at room temperature, cutting power to the heating element exactly as a blown thermal fuse would. Test the thermostat with a multimeter for continuity. Also check the cycling thermostat (6931EL3002M) and the thermistor (6323EL2001B) — all three are part of the LG dryer thermal control system and any one of them can cause a no-heat condition. What does the "L125-31C" rating mean? The L125-31C rating describes the thermostat's operating parameters. L125 means the thermostat opens (trips) when the temperature reaches approximately 125°C (257°F). The 31 indicates the reset differential — the thermostat resets when the temperature drops approximately 31°C below the trip point, around 94°C (201°F). This rating ensures the thermostat allows the heater to operate at normal drying temperatures while protecting against dangerous overheating. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine LG OEM part, but is manufactured from metal and plastic to match the L125-31C rating, dimensions, and 3-terminal configuration of the original 6931EL3001F hi-limit heater thermostat. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XP311 Dryer Thermostat Kit – Replacement for LG 6931EL3003D, 6323EL2001B, and 6931EL3001E Product Description Restore proper temperature control and dryer performance with the XP311 Dryer Thermostat Kit, designed as a high-quality aftermarket replacement for LG thermostats 6931EL3003D, 6323EL2001B, and 6931EL3001E. This kit includes multiple thermostats and thermal fuses that regulate and protect against overheating. A failing thermostat can lead to no-heat, poor drying, or overheating issues. Replacing it with this reliable kit ensures safe, consistent drying performance. Replaces Part Numbers 6931EL3003D, 1268366, AH3530485, EA3530485, PD00001818, EAP3530485, AP4440975, PS3530485, 6323EL2001B, 1268206, 6323EL2001H, AH3529026, PD00001821, EAP3529026, EA3529026, AP4441539, PS3529026, 6931EL3001E, 1268363, 6931EL3001C, PD00023869, EAP3530481, AH3530481, EA3530481, AP4440977, PS3530481. Compatibility This replacement thermostat kit is compatible with select LG and Kenmore dryers. Example compatible models include (but are not limited to): LG DLE5955G, LG DLE2516W, and Kenmore 796.81022900. Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement Kit – Designed to match LG thermostat set specifications 🌡️ Temperature Regulation – Maintains safe and consistent dryer heat levels 💰 Cost-Effective Bundle – Includes multiple thermostats and thermal fuses for one low price 🛠️ DIY Friendly – Installs easily with basic tools and clear wire connections 🛡️ Fixes Common Issues – Solves dryers not heating, overheating, or shutting off mid-cycle 📐 Product Specification Part Number: XP311 Component Type: Dryer Thermostat and Thermal Fuse Kit Material: Metal thermostat housing and heat-resistant plastic connectors Mounting: Direct-fit replacement Operating Conditions: Designed for residential electric dryers Compliance: Built to OEM-equivalent standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, nut driver, needle-nose pliers ⚠️ Safety First: Always unplug dryer before starting repairs to avoid electrical shock. Steps: Disconnect dryer from power. Remove rear access panel to expose heater housing. Identify and disconnect faulty thermostats or fuses. Install the new XP311 thermostat kit components using existing screws. Reconnect wiring harnesses securely. Restore power and test the dryer for proper heating function. ⏱️ Time Required: 20–30 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders 🛠️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Restore consistent heat and drying performance — Add to Cart Now for a reliable, budget-friendly repair solution!

Read more less

XPARTCO 279816 Dryer Thermostat Kit Product Overview The XPARTCO 279816 Dryer Thermostat Kit is designed to regulate temperature and protect your dryer from overheating. This dryer thermal cut-off kit is a replacement part for specific Maytag, Kenmore, Roper, Whirlpool dryer models. It is designed to prevent the dryer from overheating. Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance. Quick Answer If your dryer is overheating, not heating properly, or shutting off unexpectedly, the 279816 thermostat kit may be faulty. Replacing it restores proper temperature control and safe operation. Replaces Part Numbers Replaces OEM part number: 279816, 279816VP, 3399848, 3977393, PD00002348, AWP39198, EAP334299, AH334299, EA334299, AP3094244, PS334299. Compatibility This dryer thermostat kit is compatible with select Whirlpool, Maytag, Kenmore, and other compatible dryers. Whirlpool Dryers: KEYS700LQ0, RED4640YQ1, GEN2000HZ1, LER4624DZ1, LER8857EZ2, KEYS850JT1, LEN1000HQ1, LER7646EQ0, LEQ9508PG1, WED5540ST0, GCEM2990TQ1, LER3624JQ1, 885461, LER4634EZ1, LER7646JT0, LER5624DQ1, GCEM2990TQ0, 3CEP2950DN0, GEW9878PG1, LER4634EQ1, LER5636EQ3, LER8858EQ2, LEB6000PQ1, REX5634KQ1, LEQ9508LG0, LEB6000KQ2, TEDS680DQ1, LEN1000PQ1, CEDX463RQ0, TEDS680BN2, LER3624BN2, 885464, GCE2900XSW4, REX5635EQ0, LEQ7030KQ1, WED5850SW0, LET6638DQ0, LEB6300PW1, REX6646AL2, LEV6634BQ2, CEP2960JQ0, REL4632BW3, LET7646EQ2, TEDS740PQ0, LEB6300LW1, YC EDS563SQ0, LER5848EQ3, LER5636EQ1, REX5635EN2, LER4634EQ1, LER5624DZ1, EED4300SQ0, YREX4634KQ2, LEN3624BN2, WED4750XQ1, LEQ8858JQ1, LEV6634DQ0, REL3612BW3, 4GWED4900YW1, GEQ8858HQ0, WED4815EW0, LER7646EZ0, MED5700TQ1, REL4636BL2, WED5550SQ0, LEV7646AN2, TEDX540RQ1, CEE2990AG2, KEYS750LQ2, REX3514RQ0, LEC6848AW3, CED147HXW0, REX5635EQ1, KEYS700GQ0, LEN3634DW0, REL4634BW3, KEYS710LQ1, RED4440VQ1, MEDC100YQ0, REL4632DL1, MED5640TQ0, LEN3634DW1, LER8648PQ0, KEYS700EZ0, YEED4300TQ0, MED5620TQ1, YWED4916FW0, IED4400VQ0, LER5634LW0, 4KWED5790VW1, YLEQ9857LW0, KEYS700GQ0, NED4655EW1, MED5840TW0, RES7648EQ0, YMEDX500BW1, 4GAED4900YW1, LEE9848BQ2, LEN2000LG0, 7EWED1730YW1, MEDC500VW1, WED5821SW0, LER5636PQ1, 3HLER5437JQ3, LER5634EQ0, LEV7646AW2, RED4440VQ0, CEDS563MQ1, REX6646AW2, RES7646KQ0, REX5635EN0, YLEQ5000KQ0, KEYS750LT1, WED5100SQ0, LET6638DQ0, TEDX640PQ1, KEYS750LT1, KEYS700EZ0, WED5000VQ1, KEYS850LE2, LEB6300LW1, KEYS850JT1, GEW9878PG0, MEDC300BW0, MEDC400BW0, MEDC500VW0 Maytag Dryers: YNED4500VQ0, MED6600TQ0, YMEDX500BW0, MED5700TQ1, MEDC215EW1, YMED5900TW0, MEDC100YQ0, MEDC555DW1, MEDC300BW0, MEDC400BW0, MEDC500VW0, MED5600TQ1, MED5620TQ1, MED5630TQ0, MED5640TQ0, MED5707TQ0, MED5720TQ0, MED5720TQ1, MED5740TQ0, MED5740TQ1, MED5800TW0, MED5820TW0, MED5820TW1, MED5821TW0, MED5840TW0, MED5840TW1, MED5870TW0, MED5870TW1, MED5900TW0, MED5900TW1, MED5920TW0, MED5921TW0, MEDX500BW0, MEDX500BW1, MEDX655DW1, YMEDC300XW0, YMEDC400BW0, YMEDC400BW1, YMEDC415EW0, YMEDC415EW1, YMEDX500BW0, YMEDX500BW1, YMED5740TQ0, YMED5740TQ1 Kenmore Dryers: 110.62872102, 110.66514691, 110.60212990, 110.68442700, 110.62342511, 110.60814990, 110.86405850, 110.96529120, 110.6012510, 110.66854690, 110.66822694, 110.C60122511, 110.96587410, 110.66722691, 110.66512692, 110.62882101, 110.62102311, 110.69422801, 110.66862501, 110.67132411, 110.61804000, 110.66862500, 110.62842100, 110.64832400, 110.62854101, 110.60202990, 110.62602101, 110.96572830, 110.86405150, 110.67442600, 110.6012511, 110.66864500, 110.69432800, 110.60012000, 110.96587210, 110.C61112010, 110.62886101, 110.64842400, 110.66101691, 110.68402700, 110.64102301, 110.96582120, 110.65132411, 110.96575100, 110.64602300, 110.67632600, 110.66652500, 110.64912200, 110.96563820, 110.96585410, 110.66642500, 110.60012001, 110.66712692, 110.67832790, 110.62724100, 110.88762791, 110.62602100, 110.66524501, 110.68622700, 110.96575200, 110.60012001, 110.66822690, 110.68202794, 110.67342700, 110.C62332511, 110.64602301, 110.62822101, 110.62712101, 110.62802102, 110.62802100, 110.66102500, 110.67834790, 110.60722990, 110.66808690, 110.67834791, 110.69812990, 110.67622600, 110.60232001, 110.68532700, 110.66801694, 110.61402310, 110.62512100, 110.66752501, 110.96580010, 110.96564420, 110.62824101, 110.96585200, 110.66702692, 110.63102100, 110.67422600, 110.61812000, 110.64924200, 110.69622800, 110.62622100, 110.66132411, 110.62514101, 110.61262310, 110.96586400, 110.6072010, 110.66854694, 110.68652700, 110.96566400, 110.67732791, 110.66854691, 110.96566400, 110.6072010 Always verify your dryer’s model number before ordering. Contact our support team if you’re unsure. Common Problems This Part Fixes Dryer overheating Dryer not heating Dryer shutting off prematurely Inconsistent drying temperatures Key Features Includes essential thermostats for temperature control Prevents overheating and improves safety Restores consistent drying performance High-quality aftermarket replacement kit Product Specifications Part Number: XP279816 Part Type: Dryer Thermostat Kit Brand: XPARTCO Condition: New OEM / Aftermarket: Aftermarket Application: Dryer Heating & Safety System Troubleshooting Guide Dryer too hot → Faulty thermostat No heat → Failed thermal cutoff Dryer stops mid-cycle → Overheat protection triggered When Should You Replace This Kit? Replace this kit if your dryer overheats, fails to heat properly, or shuts down unexpectedly due to temperature control issues. Installation Notes ⚠️ Disconnect power before installation. Access the thermostat assembly from the rear panel and install components securely according to your dryer model. Related Parts Dryer Heating Element Thermal Fuse Dryer Timer Frequently Asked Questions Will this kit fit my dryer?This kit fits many Whirlpool and compatible models. Always verify your model number. What does a thermostat kit do?It regulates dryer temperature and protects against overheating. What are signs of a bad thermostat?Overheating, no heat, or dryer shutting off unexpectedly. Is this OEM or aftermarket?This is a high-quality aftermarket replacement kit. Shop With Confidence Parts-O-Matic is a U.S.-based appliance parts retailer specializing in OEM and high-quality replacement parts. We offer fast shipping, reliable products, and expert support. Fast Shipping Quality Tested Parts Compatibility Support  

Read more less

XPARTCO 242278801 Refrigerator Temperature Sensor – Compatible with Frigidaire, Electrolux, and Kenmore Refrigerators Product Description Keep your refrigerator cooling accurately with the XPARTCO 242278801 Refrigerator Temperature Sensor. This high-quality replacement monitors the temperature inside the fresh-food and freezer compartments, sending signals to the control board to regulate cooling. A faulty sensor can cause temperature fluctuations, over-freezing, or warm spots. Replacing it with this reliable XPARTCO part ensures consistent temperature control and energy-efficient performance. Replaces Part Numbers 242278801 PD00029820, EAP8760187, AP5802148, 3016441, PS8760187. Compatibility This replacement temperature sensor fits select Frigidaire, Electrolux, and Kenmore refrigerators. Example compatible models include (but are not limited to): Frigidaire FFHS2611LBNA, Electrolux E23BC78IPS3, and Kenmore 253.7041341C. Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure. ✅ Key Features 🔄 Aftermarket Replacement – Matches OEM temperature accuracy and response rate ❄️ Accurate Cooling Control – Monitors refrigerator temperature for consistent performance 💰 Cost-Effective Fix – Reliable alternative to expensive OEM parts 🛠️ Simple Installation – Plug-in design for fast, easy replacement 🛡️ Fixes Common Issues – Solves warm refrigerator, freezing, or inconsistent cooling problems 📐 Product Specification Part Number: 242278801 Component Type: Refrigerator Temperature Sensor (Thermistor) Material: Plastic housing with thermistor probe and wiring harness Resistance Range: Approximately 2.7 kΩ at 77°F (varies by temperature) Mounting: Direct-fit installation in refrigerator liner or evaporator area Compliance: Built to OEM-equivalent quality standards (not OEM) 🛠️ Installation Notes Tools Needed: Phillips screwdriver, wire clip removal tool ⚠️ Safety First: Always unplug the refrigerator before servicing to prevent electrical shock. Steps: Disconnect power and remove interior shelves for access. Locate the old temperature sensor, usually near the evaporator or rear wall. Disconnect the sensor’s wiring harness and remove clips. Install the new XPARTCO 242278801 sensor in the same position. Reconnect wiring, reassemble interior parts, and restore power. Allow several hours for the refrigerator to stabilize temperature. ⏱️ Time Required: 15–20 minutes 📦 Shop With Confidence 🚚 Free Shipping on All Orders ⚙️ Trusted Appliance Parts Supplier 🔄 30-Day Return Policy Keep your refrigerator cooling efficiently — Add to Cart Now for a reliable, budget-friendly repair!

Read more less

WB27X11213CM Microwave Fan Thermostat Closes at 158°F, Opens at 104°F. Fits GE Microwaves. Replaces Part Numbers:WB27X11213, WB24X28950, WB27X10846, SE-7350-004,  AP5791057, PS8754628.  This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

DA32-00011E Refrigerator Temperature Sensor Replaces Part Numbers: DA32-00011E, DA32-00006N, AP4140987, PS4138598.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less