WR49X10152 Refrigerator Genuine OEM Control Board
Replaces Part Numbers: WR49X10152, 1266021, AH1483475, EA1483475, AP3957581, PS1483475, WR49X10092, WR49X10115, WR49X10121, WR49X10138, WR49X10147, WR55X10156, WR55X10414, WR55X10492, WR55X10530.
Description: This is a replacement control board that has been manufactured by General Electric for use with specific refrigerator models.The control board is a critical component that ensures various refrigerator functions, such as defrost times and cooling, are properly regulated. This part should be replaced as soon as possible if faulty, otherwise the refrigerator may not be able to maintain a cold temperature or might not work at all. Before replacing this part, ensure the appliance is entirely disconnected from the power and water sources. Whenever attempting a repair, wear work gloves for protection.This part is suitable for use on a refrigerators that have been manufactured by General Electric, Hotpoint, RCA, and some other brands. This is a genuine OEM part and thus is manufactured from high-quality, durable, non-corrosive materials and is only sold individually.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
2304099 Refrigerator Defrost Control Board
Replaces Part Numbers: WP2304099, 2304099, 1174817, 2213100, 2213473, 2302564, 2303826, OEM24028522, AP6007130, PS11740238.
Description: This is a refrigerator control board that can be used to replace a damaged or faulty board in select refrigerators. The control board is used to manage various functions that occur in the refrigerator, including cooling and defrosting. If there is a problem with the board, the refrigerator might not be able to defrost correctly, or it might not stay cool. This control board for the refrigerator tends to last a long time. However, it could eventually wear out and stop working. It could be damaged due to a voltage surge, or it might be a faulty board. Remove and store all food in the refrigerator and unplug it before beginning repairs. This refrigerator control board works with certain models from Kenmore, Whirlpool, KitchenAid, Roper, Estate, Inglis, Crosley, Gladiator, Kirkland, and Maytag.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WPW10226427 Refrigerator Genuine OEM Power Supply Board
Replaces Part Numbers: WPW10226427, W10226427, 1551792, OEM18052172, AP6017389, PS11750687.
Description: This is a Genuine OEM refrigerator power supply board. It's an internal component that is made to control the refrigerator functions. This part is made with small precision parts to help with timing defrost and cooling cycles. This part can be damaged or malfunction and stop operating correctly. This may prevent the refrigerator from running, cause strange sounds, or cause the refrigerator to run at the wrong temperature.If this part is damaged, it will need to be replaced. Before replacing the power supply board, make sure the refrigerator is unplugged from the wall. The process will require a flathead screwdriver and a nut driver. Use the tools to unthread the screws on the access cover. Depress the retaining tab to remove the inner cover and disconnect the wires. Press the tab to release the power supply board and snap in the new component. Make sure the wires are properly connected and reassemble.This genuine OEM replacement part is sold on an individual basis. It is directly acquired from the manufacturer and is designed to be compatible with specific refrigerator models made by Kenmore, Whirlpool, Maytag, and KitchenAid.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
W10503278 Refrigerator Control Board
Refrigerator electronic (JAZZ) control board. Be aware the board will need to programmed after installation to work properly
Replaces Part Numbers: WPW10503278, 12784415, W10503278, 12002339, 12002445, 12002449, 12002508, 12002509, 12002567, 12002706, 12784415V, 12868502, 12868510, 12868513, 2684578, 67003867, 67004453, 67004496, 67004907, 67005043, 67005280, 67005281, 67006034, 67006209, 67006214, 67006216, 67006226, 67006712, 67006740, 8208187, AP6022400, PS11755733, W10165748.
Description: This Electronic Control Board is a replacement part for Specific Maytag, Whirlpool refrigerator models. This Electronic (JAZZ) Control Board manages various functions of your refrigerator, ensuring proper temperature control and operation.
This is an aftermarket part that can be used as a replacement for the OEM part.
WR55X10025 Refrigerator Genuine OEM Temperature Sensor
Refrigerator or freezer temperature sensor (also called a thermistor).
The thermistor monitors the refrigerator, freezer, and evaporator temperature and sends the temperature reading to the control board.
Replaces Part Numbers: WR55X10025, 914093, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025-50PK, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11151, WR55X11152, AH304103, EA304103, OEM12741630, AP3185407, PS304103.
Description: This Temperature Sensor is a Genuine OEM part for select GE refrigerator models, designed to accurately monitor and relay the temperature inside the refrigerator and freezer compartments to the electronic control board. By detecting the slightest changes in internal temperature, the sensor allows the control board to make real-time adjustments to the cooling system, activating the compressor and fans as needed to maintain optimal conditions for food preservation.
XPARTCO DA32-10105X Refrigerator Temperature Sensor – Compatible with Samsung and Kenmore Refrigerators
Product Description
Maintain consistent cooling performance with the XPARTCO DA32-10105X Refrigerator Temperature Sensor. This high-quality replacement monitors internal refrigerator temperature and communicates with the control board to regulate cooling cycles. A faulty sensor can cause temperature fluctuations, frost buildup, or over-cooling. Installing this reliable XPARTCO sensor helps restore accurate temperature readings and energy-efficient operation.
Replaces Part Numbers
DA32-10105X, 2030345, PD00002045, EAP4138686, AP4338786, PS4138686
Compatibility
This replacement temperature sensor fits select Samsung and Kenmore refrigerators.
Example compatible models include (but are not limited to): Samsung RF28HMEDBSR/AA, RF23HCEDBSR/AA, and Kenmore 795.72053.112.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Designed to match OEM accuracy and reliability
❄️ Precision Cooling Control – Ensures stable refrigerator and freezer temperatures
💰 Budget-Friendly Fix – Provides OEM-level performance at a lower cost
🛠️ Easy Installation – Plug-in design for fast and simple replacement
🛡️ Fixes Common Issues – Solves cooling inconsistencies, frost buildup, or warm compartment problems
📐 Product Specification
Part Number: DA32-10105X
Component Type: Refrigerator Thermistor (Temperature Sensor)
Material: Plastic sensor probe with insulated wiring harness
Mounting: Clip-in or taped to evaporator wall depending on model
Compliance: Built to OEM-equivalent quality standards (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, needle-nose pliers
⚠️ Safety First: Always unplug the refrigerator before performing any repairs to prevent electrical shock.
Steps:
Disconnect power and remove interior shelves for access.
Locate the existing temperature sensor near the evaporator coil or rear wall.
Unplug the old sensor from its wiring harness.
Install the new XPARTCO DA32-10105X sensor and reconnect the harness.
Secure the sensor in place with clips or adhesive as applicable.
Reassemble interior panels and restore power.
⏱️ Time Required: 15–20 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Keep your refrigerator running efficiently — Add to Cart Now for a reliable, cost-effective repair!
XPARTCO 2188820 Refrigerator Thermistor (Sensor) Replaces WP2188820
The XPARTCO 2188820 is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with select Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, and Thermador refrigerators. The thermistor is an NTC (negative temperature coefficient) sensor that continuously monitors the air temperature inside the refrigerator or freezer compartment and sends resistance-based readings to the electronic control board. The control board uses these readings to regulate compressor run time and fan operation, maintaining the set temperature accurately and efficiently.
This thermistor features an NTC resistance of 50K ohms at 25°C (27K ohms at 0°C/32°F) and a standard wire length of approximately 5.3 inches (13.46 cm), compatible with low-voltage refrigerator control boards (5V/12V). It directly replaces WP2188820, 2213442, AP6006068, PS11739132, and 1057764. Note: this thermistor is compatible with non-WISE system refrigerators only — it is not compatible with newer Whirlpool refrigerators using the WISE (Whirlpool Intelligent Smart Energy) control system. Installs in under 15 minutes.
Quick Answer
The XPARTCO 2188820 Refrigerator Thermistor fixes Whirlpool-family refrigerators that are too warm, too cold, have erratic temperatures, run the compressor too long, or display temperature-related error codes. NTC sensor, 50K ohm at 25°C, ~5.3" wire. Non-WISE system models only. Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, and Thermador. Replaces WP2188820, 2213442, AP6006068, PS11739132.
Common Problems This Part Fixes
Refrigerator not maintaining set temperature — too warm or too cold
Freezer section too warm or food not freezing properly
Compressor running continuously without cycling off
Temperature fluctuating erratically despite stable ambient conditions
Refrigerator temperature-related error codes displayed on the control panel
Excessive frost buildup caused by incorrect temperature regulation
Food or beverages freezing in the fresh food section
Replaces Part Numbers
This refrigerator thermistor directly replaces the following OEM and cross-reference part numbers:
WP2188820, 2188820, 2213442, EAP11739132, AWP46934, PD00033406, AP6006068, PS11739132.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This thermistor is compatible with select refrigerators from the following brands and series:
Whirlpool refrigerators — 5VW, GC3, EC3, GC5 series
Kenmore / Sears refrigerators — 106 series (Whirlpool-built models)
KitchenAid refrigerators — KSCS, KSSS, JS series
Maytag refrigerators (select models)
Jenn-Air refrigerators (select models)
Dacor refrigerators (select models)
Thermador refrigerators (select models)
Important — WISE System Compatibility: The 2188820 thermistor is compatible with non-WISE system refrigerators only. It is not compatible with newer Whirlpool refrigerators equipped with the WISE (Whirlpool Intelligent Smart Energy) control system. If your refrigerator uses the WISE system, this thermistor will not work correctly. Verify your model number before ordering, or contact our support team to confirm compatibility.
Key Features
NTC (negative temperature coefficient) thermistor — resistance decreases as temperature increases, allowing precise temperature monitoring
50K ohm resistance at 25°C (27K ohm at 0°C/32°F) — matches original WP2188820 specifications
Wire length approximately 5.3 inches (13.46 cm) — standard length matching OEM dimensions
Low-voltage design compatible with 5V/12V refrigerator control boards
Continuously sends temperature readings to the control board to regulate compressor and fan operation
Non-WISE system compatible only — verify your model before ordering
Direct replacement for WP2188820, 2213442, AP6006068, and PS11739132
Compatible with Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, and Thermador refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Quick DIY repair — installs in under 15 minutes
Product Specifications
Part Number
2188820
OEM Part Number
WP2188820
Part Type
Refrigerator Temperature Sensor (NTC Thermistor)
Condition
Aftermarket Replacement
Sensor Type
NTC (Negative Temperature Coefficient)
Resistance at 25°C
50,000 ohms (50K ohm)
Resistance at 0°C (32°F)
27,000 ohms (27K ohm)
Wire Length
Approximately 5.3 inches (13.46 cm)
Voltage
5V / 12V (low voltage)
WISE System Compatibility
Non-WISE models only
Compatible Brands
Whirlpool, Kenmore, KitchenAid, Maytag, Jenn-Air, Dacor, Thermador
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power before beginning. The thermistor location varies by model — it is typically clipped to a bracket on the interior side wall of the fresh food or freezer compartment, or mounted near the evaporator coil. Consult your model's parts diagram or service manual to confirm the exact location before disassembly. Open the sensor cover or unclip the sensor bracket, disconnect the wiring connector, and pull the old thermistor out. Insert the new 2188820 thermistor, reconnect the wiring connector, and snap the cover or bracket back into place. Ensure the sensor head is positioned close to the compartment wall and the wiring is not pinched. Restore power and monitor the refrigerator temperature over the next few hours to confirm stable, accurate cooling. Tools needed: Phillips screwdriver (for panel access on some models); no tools needed for sensor replacement itself.
Frequently Asked Questions
What is the difference between 2188820 and WP2188820?
These are the same thermistor. WP2188820 is the updated Whirlpool OEM part number that superseded the original 2188820. The 2213442 is also a cross-reference for the same part. This aftermarket replacement is compatible with all three numbers.
What does an NTC thermistor do and how do I know if mine has failed?
An NTC thermistor is a resistor whose resistance decreases as temperature increases. The control board sends a small voltage through the thermistor and measures the resulting resistance — a lower resistance means warmer temperature, and a higher resistance means cooler temperature. The board uses this reading to decide when to run the compressor and fans. A failed thermistor either reads open circuit (no continuity), short circuit (zero resistance), or provides incorrect readings that cause the refrigerator to run too warm, too cold, or cycle erratically. Test with a multimeter at room temperature — a working 2188820 should read approximately 50K ohms at 25°C (77°F). Significant deviation indicates failure.
How do I know if my refrigerator uses the WISE system?
The WISE (Whirlpool Intelligent Smart Energy) system was introduced on newer Whirlpool refrigerator models and uses a different thermistor specification that is not interchangeable with the 2188820. Models that use the WISE system are typically marked in the product documentation or on the control board. The easiest way to confirm compatibility is to verify your model number with our support team before ordering, or check whether WP2188820 appears in your model's official parts diagram. If your parts diagram lists WP2188820, this replacement is compatible.
Where is the thermistor located in my refrigerator?
The thermistor location varies by model and brand. On Whirlpool and KitchenAid models, it is commonly found on the interior side wall of the fresh food compartment clipped to a plastic housing. On some models it is located near the evaporator coil behind the freezer back panel. On Kenmore 106 series models, it may be on the fresh food section wall or inside the back panel. Consult your specific model's parts diagram or search for a model-specific installation video to locate the sensor before disassembling the refrigerator.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured with an NTC thermistor rated to the same 50K ohm specification as the original WP2188820 to match the performance and accuracy of the factory sensor.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA32-00006S Refrigerator Temperature Sensor – Compatible with Samsung Refrigerators
Product Description
Restore accurate temperature monitoring and consistent cooling with the XPARTCO DA32-00006S Refrigerator Temperature Sensor. This high-quality aftermarket replacement (also known as a thermistor) measures internal refrigerator or freezer temperatures and sends precise feedback to the control board. A failed or inaccurate sensor can cause temperature fluctuations, over-freezing, warm compartments, or error codes. Replacing it with this reliable XPARTCO sensor helps maintain stable temperatures and proper refrigerator operation. fits select Samsung Refrigerator models
XPARTCO provides cost-effective aftermarket appliance parts engineered to match original fit and performance.
Replaces Part Numbers
DA32-00006S, PD00002153, EAP4138590, AP4308802, PS4138590.
Compatibility
This replacement refrigerator temperature sensor fits select Samsung refrigerators.
Commonly used in fresh food or freezer compartments depending on model.
Always verify your refrigerator’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM resistance and response specifications
🌡️ Accurate Temperature Sensing – Helps maintain consistent cooling
❄️ Fixes Cooling Issues – Resolves temperature swings and sensor-related errors
🧩 Direct-Fit Design – Installs easily without modification
💰 Cost-Effective Repair – Reliable alternative to OEM temperature sensors
📐 Product Specification
Part Number: DA32-00006S
Component Type: Refrigerator Temperature Sensor (Thermistor)
Function: Measures and reports internal temperature
Application: Refrigerator or freezer compartment (model dependent)
Connector Type: Plug-in wire harness
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: Phillips screwdriver
⚠️ Safety First: Unplug the refrigerator before servicing to avoid electrical shock.
Basic Steps:
Disconnect refrigerator power.
Access the sensor location inside the compartment or behind the panel.
Disconnect the old temperature sensor from the wiring harness.
Remove the old sensor and install the new XPARTCO DA32-00006S sensor.
Reconnect wiring, reassemble panels, and restore power.
Allow several hours for temperatures to stabilize.
⏱️ Time Required: 15–25 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore accurate temperature control and reliable cooling — Add to Cart Now for a dependable, budget-friendly repair!
Choice DA32-10109Y Refrigerator Temperature Sensor – Replacement for Samsung
Product Overview
The DA32-10109Y Refrigerator Temperature Sensor is an aftermarket replacement part designed to measure and relay internal temperatures to the control board. A faulty sensor can lead to cooling problems, temperature fluctuations, or improper defrost cycles. Replacing a worn sensor with this reliable component helps restore accurate temperature readings and optimal cooling performance in your refrigerator.
8-1/4" overall length with two pin plug for freezer.
Fits Samsung SXS refrigerator models.
Replaces Part Numbers
This sensor replaces part numbers DA32-10109Y, AP4136950, PS4138703.
It is engineered to match the fit and functionality of the original Samsung sensor.
Compatible Brands
Compatible with many Samsung and Kenmore refrigerators manufactured by Samsung. Fits French door, bottom-freezer, and side-by-side models that use this temperature sensor.
Fixes the Following Issues
Refrigerator not cooling properly
Freezer too warm or too cold
Temperature reading errors
Inconsistent cooling or defrost operation
Why Buy from Parts‑O‑Matic
Affordable and dependable aftermarket part
Fast and free U.S. shipping
Easy to install – no special tools required
Trusted by appliance techs and DIYers
67006390 Refrigerator Hv Control Box
Replaces Part Numbers: WP67006390, 67006390, 12957601, 12957601SP, 4435670, AP6010509, PS11743690.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
DA32-10105V Refrigerator Temperature Sensor
Replaces Part Numbers: DA32-10105V, 2030344, OEM12423002, AP4140999, PS4138685.
Description: This Temperature Sensor is a replacement part for specific Samsung refrigerator models. This part monitors the internal temperature of the refrigerator and communicates this information to the control board, which regulates the cooling cycle.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
