DC64-01570A Washer Genuine Door Boot
Rubber boot assembly.
Fits select Samsung front-load washer models.
Replaces Part Numbers: DC97-16140G, AP5622529, PS4221426.
Description: This Washer Door Diaphragm is an essential component for maintaining your washer's functionality. This Genuine replacement part ensures a secure and effective seal, preventing leaks and enhancing the overall performance of your washing machine. Specifically designed for compatibility with a range of Samsung washer models, it guarantees a perfect fit and straightforward installation. Made from durable materials,
XPARTCO WH23X29553 Washer Water Valve
The XPARTCO WH23X29553 is an aftermarket replacement water inlet valve for GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café models. This valve controls the flow of water into the washer from the household supply line — when the control calls for a fill, the valve's solenoid opens to admit water, and closes again once the correct level is reached. Built with an ABS plastic body and stainless steel components for durability against corrosion.
Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use. A failing valve typically shows up as the washer not filling properly, filling too slowly, or leaking water. It directly replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA. As an aftermarket replacement, the WH23X29553 is built to OEM-equivalent quality standards.
Quick Answer
The XPARTCO WH23X29553 Washer Water Valve fixes GE front-load washers (and select Hotpoint, RCA, Haier, Monogram, and Café models) that aren't filling properly, are filling too slowly, or are leaking water near the valve connections. Replaces AP6983554, PS12743643, EAP12743643, 33090202, 0024000126GA. Not the same part as the similarly-numbered WH23X29538 valve — confirm you have the correct number before ordering.
Common Problems This Part Fixes
Washer not filling with water, or filling only partially
Washer fills much more slowly than it used to
Water leaking near the valve connections
Cycle stalling at the fill step and never advancing to wash
No hot water reaching the tub, or no cold water reaching the tub
Washer not washing properly due to insufficient or incorrect-temperature water
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH23X29553, 33090202, C-491/20-A13, AGE26162, AP6983554, EAP12743643, PD00067381, PS12743643
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select GE front-load washers, and also fits select Hotpoint, RCA, Haier, Monogram, and Café washers built on the GE platform, including model numbers such as:
GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN
GFW650SSN0WW, GFW650SSN1WW, GFW650SSN2WW, GFW650SSN3WW, GFW650SSN4WW
GFW850SPN0DG, GFW850SPN0RS, GFW850SPN1DG, GFW850SPN1RS, GFW850SPN2DG, GFW850SPN2RS, GFW850SPN3DG, GFW850SPN3RS, GFW850SPN4RS, GFW850SPN5RS
GFW850SSN0WW, GFW850SSN1WW, GFW850SSN2WW, GFW850SSN3WW
GFW655SSV0WW
PFW870SPV0RS
PFW950SPT0DS, PFW950SPT1DS, PFW950SPT2DS
Note — not the same as WH23X29538: A similarly-numbered valve, WH23X29538, is a separate part (replaces 4977241, AP6990115, PS16217225, EAP16217225, 33090201, 0024000126GB) used on related but distinct models. The two are easy to confuse given how close the numbers are — always confirm you have the exact part number from your appliance or parts diagram before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement built to match GE's factory-specified solenoid design and flow rate
ABS plastic body with stainless steel components for corrosion resistance
Resolves "won't fill," "fills slowly," and "leaking near the valve" symptoms caused by valve failure
Direct drop-in replacement — matches the original mounting and hose connections
Replaces AP6983554, PS12743643, EAP12743643, 33090202, and 0024000126GA
Compatible with GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
XPWH23X29553
Part Type
Washer Water Inlet Valve
OEM Part Number
WH23X29553
Condition
Aftermarket Replacement
Brand
GE
Application
Front-Load Washers
Body Material
ABS plastic
Component Material
Stainless steel
Quantity
1 valve
Compatible Brands
GE, Hotpoint, RCA, Haier, Monogram, Café
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Release The Control Panel Carefully Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. Access to this valve is typically behind the front control panel on many models. When removing the front control panel, avoid pulling it straight out too far — slotted tabs on the right side of the panel can break if forced. Instead, pull the panel gently forward, then slide it to the right to release it cleanly. With the panel released, locate the valve and disconnect the hot and cold water supply hoses, keeping a towel handy for residual water. Photograph the wiring and hose connections before disconnecting anything. Disconnect the electrical connector and the outlet hoses from the old valve, remove its mounting screws, and pull it free. Install the new WH23X29553 in the same position, reconnect all outlet hoses to their original positions, reconnect the electrical connector, and secure the mounting screws. Reattach the hot and cold supply hoses, tightening securely. Reinstall the control panel and any surrounding trim, restore the water supply, and check every connection for leaks before restoring power. Run a full test cycle across a few different temperature settings to confirm each fill function works correctly. Tools needed: Phillips screwdriver, pliers, towel, work gloves.
Frequently Asked Questions
How do I remove the front control panel without breaking it?
Avoid pulling the panel straight out with heavy force — the slotted tabs on the right side of the panel can snap if you pull too far. Instead, pull the panel gently forward first, then slide it to the right to release it from its mounting. This gentler approach avoids the most common way this panel gets damaged during a valve repair.
I've heard this valve sometimes needs replacing again after just a couple of years. Is that normal?
Some owners have reported needing to replace this valve again within a relatively short time, even after a successful repair. While most installations hold up well long-term, if you experience a repeat failure, it's worth double-checking your household water pressure and mineral content, since hard water and high pressure can accelerate wear on any water valve regardless of brand.
Is this the same as WH23X29538? The numbers look almost identical.
No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close match, since ordering the wrong one means it won't fit correctly.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the solenoid design, flow rate, and connection type of the original WH23X29553 valve used in compatible GE, Hotpoint, RCA, Haier, Monogram, and Café front-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
7403P23860 Surface Element Infinite Switch
Description: This Infinite Switch is a replacement part for specific Whirlpool range models. This switch controls the multiple heat settings of the large element, allowing the user to select their desired cooking temperature. It is an important electrical component that regulates burner heating cycles.
Replaces Part Numbers: WP7403P238-60, 7403P238-60, 705120, 7403P262-60, 7403P373-60, AP6011290, PS11744486, WP7403P238-60VP.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
WH11X34740 Washer Genuine OEM Drain Pump Assembly – Compatible with GE & Hotpoint Washers
Product Description
Restore proper draining and reliable washer operation with the WH11X34740 Washer Drain Pump Assembly. This Genuine OEM replacement pump is responsible for removing water from the washer during drain and spin cycles. A failing drain pump can cause standing water, slow draining, loud grinding noises, or error codes. Replacing it with this Genuine OEM assembly helps ensure efficient water removal and dependable washing performance.
Replaces Part Numbers
WH23X25518, WH23X10038, WH23X25461, PD00079543, EAP16743374, AP7195487, PS16743374.
Compatibility
This Genuine OEM replacement washer drain pump assembly fits select GE and Hotpoint washers.
Example compatible models include (but are not limited to):
GE GTW465ASNWW, GTW335ASNWW
Hotpoint HTW240ASKWS
Always verify your washer’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM – Genuine OEM part
💧 Efficient Water Removal – Restores proper draining during cycles
🔇 Quiet Operation – Helps eliminate grinding or buzzing noises
💪 Durable Motor Construction – Designed for long service life
📐 Product Specification
Part Number: WH11X34740
Component Type: Washer Drain Pump Assembly
Voltage: 120V AC
Mounting: Direct-fit, bolt-on installation
Application: Washer drain and spin system
Quality Level: Genuine OEM
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, nut driver, pliers
⚠️ Safety First: Unplug the washer and shut off the water supply before servicing.
Basic Steps:
Disconnect washer power and water supply.
Access the drain pump from the bottom or rear of the washer.
Remove hoses and electrical connectors.
Remove mounting screws and take out the old pump.
Install the new WH11X34740 drain pump assembly.
Reconnect hoses and wiring, reassemble panels, and restore power.
Run a test cycle to confirm proper draining.
⏱️ Time Required: 25–35 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore proper washer draining and prevent water buildup — Add to Cart Now for a dependable, budget-friendly repair!
XPARTCO Washer Replacement Part
XPARTCO W10144820 Water Inlet Valve Assembly Replaces WPW10144820
Complete hot/cold washer inlet valve assembly with vacuum break and built-in thermistor for water-temperature sensing.
Product Overview
The XPARTCO W10144820 Washer Water Inlet Valve Assembly controls hot and cold water flow into compatible Whirlpool-built top-load washers. The complete assembly includes the hot-water valve, cold-water valve, vacuum-break section, and thermistor used by the washer to sense incoming water temperature.
This is a quality XPARTCO aftermarket replacement part designed to replace WPW10144820 on compatible models.
Quick Answer
Use this assembly when a compatible washer fills slowly, will not fill, overfills because a valve does not close correctly, or has a failed inlet thermistor. Verify the full washer model number before ordering because similar Whirlpool-built washers may use different valve assemblies.
Common Problems This Part May Fix
Washer fills slowly
Washer will not fill with hot or cold water
Incorrect water temperature
Water continues entering after fill should stop
Intermittent filling
Fault related to inlet water-temperature sensing
Cracked or leaking inlet valve body
Replaces and Cross-References
WPW10144820, W10144820, W10311458, WPW10144820VP, 33190126, 33190127, W10140914, W10140911, PD00002258, EAP11749042, AP6015761, AWP49944, PS11749042.
Cross-reference numbers are provided for identification. XPARTCO is an aftermarket replacement brand and is not manufactured by Whirlpool.
Compatibility
Fits select Whirlpool-built top-load washers sold under Whirlpool, Maytag, Amana, Admiral, Crosley, Estate, Inglis, Kenmore, and Roper brands. Compatible examples include:
WTW5505VQ1
WTW5300VW2
1CWTW5200VQ1
NTW4500XQ0
NTW4600VQ1
RTW4305VQ1
MVWC400VW1
110.29722801
CAWSS16445WQ0
Important: This is only a partial model list. Confirm the complete washer model number and original valve assembly before purchase.
Key Features
Quality XPARTCO aftermarket replacement
Complete hot/cold inlet valve assembly
Built-in thermistor for water-temperature sensing
Integrated vacuum-break section
Controls incoming washer water flow
Replaces WPW10144820 and earlier numbers
Product Specifications
XPARTCO Part Number
W10144820
Replaces
WPW10144820
Part Type
Washer Water Inlet Valve Assembly
Configuration
Hot + Cold Inlet Valve Assembly
Temperature Sensor
Built-In Thermistor
Vacuum Break
Included
Condition
New
Part Quality
Aftermarket Replacement
Quantity
1 Assembly
Installation Notes
Unplug the washer and shut off both hot and cold water supplies.
Relieve hose pressure and disconnect the inlet hoses.
Photograph the original wiring and hose routing before removal.
Inspect inlet screens and supply hoses for restriction or damage.
Transfer connections only after confirming the replacement matches the original assembly.
Reconnect hot and cold hoses to the correct inlets and check carefully for leaks.
Restore power and water, then run a fill test to confirm proper hot/cold operation and temperature sensing.
Diagnostic tip: Slow filling can also be caused by clogged inlet screens, kinked hoses, low household water pressure, or partially closed supply valves.
Frequently Asked Questions
Does this assembly include the temperature sensor?
Yes. This valve assembly includes a thermistor used for incoming water-temperature sensing.
Does W10144820 replace WPW10144820?
This XPARTCO part is designed as an aftermarket replacement for the OEM WPW10144820 valve assembly.
Is this a Genuine Whirlpool OEM valve?
No. It is a quality XPARTCO aftermarket replacement.
Will this fit every Whirlpool top-load washer?
No. Whirlpool-built washers use several different inlet-valve designs, so the complete model number should be verified before ordering.
Shop With Confidence
Verify your washer model and original valve number before ordering. Our compatibility team can help confirm whether XPARTCO W10144820 is correct for your appliance.
Hot + Cold ValveBuilt-In ThermistorXPARTCO ReplacementCompatibility Support
V-156-1C25 Micro Limit Switch
Contact Type: SPDT 1NO 1NC
Actuator Type: 1.1" Long Hinge Roller Lever
Rating: 15A 125 250VAC
Lever Length: 1.1" Long Hinge Roller Lever
Rating: 15A,1/2HP, 125 250VAC; 0.6A,125VDC; 0.3A, 250VDC
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
Genuine Whirlpool WPW10605427 Washer Drain Pump - Compatible with Whirlpool, Maytag, KitchenAid, Amana, Kenmore
Product Description
Restore your washer’s performance with the Genuine Whirlpool WPW10605427 Washer Drain Pump. This OEM drain pump is designed for select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore washing machines, efficiently circulating and draining water during wash and rinse cycles. It addresses issues like failure to drain, leaking, or unusual noises, delivering reliable performance as an authentic Whirlpool part.
Note: Includes one drain pump with electrical connector. Disconnect power before installation. Inspect pump filter and drain hoses for clogs to ensure optimal performance.
Replaces part numbers: WPW10605427, WPW10425238, W10425238, W10605427, W10799064, W10799065, W10903216, W10918044, PD00038328, EAP11756700, AP6023357, PS11756700.
Compatibility:
Compatible with models including but not limited to:
Whirlpool: WFW72HEDW0, WFW75HEFW0, WFW90HEFC0, WFW92HEFW0
Maytag: MHW3500FW0, MHW5500FC0, MHW7100DW0
KitchenAid: KSMW1030SS0
Amana, Kenmore: (select models, verify compatibility)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Whirlpool, Maytag, KitchenAid, Amana, and Kenmore washing machines.
💧 Specifications: OEM drain pump, 120V, stainless steel and plastic construction.
💪 Reliable Performance: Authentic Whirlpool part ensures long-lasting durability.
🛠️ Easy Installation: Requires screwdriver, pliers, and work gloves; typically installed in 15–30 minutes.
🛡️ Effective Fixes: Resolves failure to drain, leaking, or unusual noises during operation.
Product Specification
Part Number: Genuine Whirlpool WPW10605427
Component Type: Washer drain pump
Material: Stainless steel and plastic
Electrical Specs: 120 volts, AC
Mounting: Screw-mounted, typically at the bottom rear of the washer
Operating Conditions: Suitable for household washing machine environments
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the washer from the power source before installation.
Shop for high-quality Genuine appliance parts with a 30-day return policy. Keep your washer draining efficiently today!
Add to cart now for a reliable fix!
XPARTCO WH01X10060 Washer / Dryer Selector Knob – Compatible with GE & Hotpoint Laundry Units
Product Description
Restore smooth control and reliable operation with the XPARTCO WH01X10060 Washer / Dryer Selector Knob. This high-quality aftermarket replacement knob fits securely onto the selector switch shaft, allowing easy and precise cycle or function selection. A cracked, loose, or missing selector knob can make it difficult to operate your washer or dryer correctly. Replacing it with this durable XPARTCO knob helps restore normal operation and improves everyday usability.
XPARTCO is a trusted aftermarket brand offering appliance replacement parts built to OEM-equivalent specifications at a cost-effective price.
Replaces Part Numbers
WH01X10060, WH01X10140, 277248, WE01M0445, WE01X10142, WE01X10147, WE1M445, WE1X10142, WE1X10147, WH01X10107, WH01X10135, WH1X10060, WH1X10107, WH1X10135, WH1X10140, PD00001193, EAP268450, AH268450, EA268450, AP2044504, PS268450.
Compatibility
This replacement washer / dryer selector knob fits select GE and Hotpoint washers and dryers.
Commonly used on laundry units with rotary selector switches.
Always verify your appliance’s model number before ordering.Contact our support team if you’re unsure.
✅ Key Features
🔄 Aftermarket Replacement – Matches OEM fit and appearance
🎛️ Smooth Selector Control – Restores easy cycle or function selection
🧩 Direct-Fit Design – Push-on fit for secure installation
💪 Durable Plastic Construction – Built for repeated daily use
💰 Cost-Effective Repair – Affordable alternative to OEM knobs
📐 Product Specification
Part Number: WH01X10060
Component Type: Washer / Dryer Selector Knob
Material: High-strength molded plastic
Color: White (OEM-style)
Mounting: Push-on / shaft-fit
Quality Level: Aftermarket replacement (not OEM)
🛠️ Installation Notes
Tools Needed: None
⚠️ Safety First: Ensure the washer or dryer is powered off before installing the knob.
Basic Steps:
Turn the appliance off.
Align the new XPARTCO WH01X10060 knob with the selector shaft.
Press firmly until fully seated.
Rotate to confirm smooth operation.
⏱️ Time Required: Under 2 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
⚙️ Trusted Aftermarket Appliance Parts
🔄 30-Day Return Policy
Restore smooth control in seconds — Add to Cart Now for a quick, budget-friendly fix!
XPARTCO WH13X26535 Washer Water Valve
The XPARTCO WH13X26535 is an aftermarket replacement water inlet valve assembly for GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café models. This valve controls the flow of hot and cold water into the tub during the fill portion of the cycle, ensuring each wash uses the correct amount of water at the right temperature blend. It's housed in durable gray plastic.
Common failure causes include mineral or sediment buildup inside the valve body, a burned-out internal solenoid coil, and general wear over years of use — five years is a commonly cited service life before this valve starts to show problems. A failing valve produces a clear set of symptoms: the washer not filling properly, water continuing to fill or drip even when the washer is turned off, or leaking near the valve area. It directly replaces WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769
Quick Answer
The XPARTCO WH13X26535 Washer Water Valve fixes GE top-load washers that aren't filling properly, are overfilling, or have water slowly dripping into the tub even when the washer is off. Housed in gray plastic. Replaces WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769. This replacement valve does not include a thermistor or gasket — if your old valve has a thermistor mounted in front of the solenoids, you'll need to transfer it (with its gasket) to the new valve. Also not the same as the similarly-numbered WH13X26534, which is a separate valve for other GE/Hotpoint models.
Common Problems This Part Fixes
Washer not filling with water properly
Washer overfilling
Water slowly dripping or leaking into the tub even when the washer is turned off
Leaking near the valve connections
No hot water reaching the tub, or no cold water reaching the tub
Cycle stalling at the fill step and never advancing to wash
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This washer water inlet valve directly replaces the following OEM and cross-reference part numbers:
WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This water valve is compatible with select GE top-load washers, and also fits select Hotpoint, Haier, Monogram, and Café washers built on the GE platform, spanning model series GTW460, GTW465, GTW485, GTW490, GTW500, GTW525, GTW540, and VTW540, including specific model numbers such as 5TW4207ST0WS, 5TW4307SW0WS, ETW485ASW0WB, GTW460AMJ0WW, GTW460AMJ1WW, and GTW460AMJ2WW.
Note — thermistor transfer required, and not the same as WH13X26534: This valve does not include a thermistor or the rubber gasket that seats it. If your original valve has a thermistor mounted in front of the solenoids, you must transfer that thermistor and its gasket onto this new valve during installation. Separately, this part is not the same as the similarly-numbered WH13X26534, a distinct valve used on other GE/Hotpoint models with its own cross-reference set (PS12726768, AP6891106). Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Aftermarket replacement water inlet valve — controls hot and cold water flow into the tub
Resolves "won't fill properly," "overfilling," and "dripping into the tub when off" symptoms caused by valve failure
Durable gray plastic housing
Direct drop-in replacement — matches the original mounting and hose connections
Replaces WH13X26535, WH13X24386, 4931303, WH13X24392, AP6892695, AGE26261, EAP12726769, OEM20678094, PD00052736, PS12726769
Compatible with GE, Hotpoint, Haier, Monogram, and Café top-load washers
Aftermarket replacement built to OEM-equivalent quality standards
Moderate DIY repair, typically 30 to 60 minutes
Product Specifications
Part Number
WH13X26535
OEM Part Number
WH13X26535
Part Type
Washer Water Inlet Valve
Condition
Aftermarket Replacement
Application
Top-Load Washers
Housing Material
Gray plastic
Includes Thermistor/Gasket
No — transfer from old valve if equipped
Repair Difficulty
Moderate — 30 to 60 minutes
Quantity
1 valve
Compatible Brands
GE, Hotpoint, Haier, Monogram, Café
Installation Notes
⚠️ Shut Off Water Supply And Unplug Washer Before Starting — Watch For The Thermistor O-Ring Disconnect power at the outlet or shut off the circuit breaker, and shut off both hot and cold water supply valves before beginning. Wear work gloves. Access is typically behind the front control panel or top of the cabinet, depending on your model. The valve assembly is usually held in place with a metal plate and two screws. Photograph the wiring and hose connections before disconnecting anything. If your old valve has a thermistor (temperature sensor) mounted in front of the solenoids, it fits into a small hole in the bracket and uses an O-ring seal that's known to degrade and leak over time — this new valve does not include one, so you'll need to carefully transfer the thermistor and its gasket from the old valve to the new one. Disconnect the electrical connector and outlet hoses from the old valve, remove its mounting screws, and pull it free. Transfer the thermistor and gasket to the new WH13X26535 if applicable, then install it in the same position, reconnect all outlet hoses to their original positions, reconnect the electrical connector, and secure the mounting screws. Reattach the hot and cold supply hoses, tightening securely. Restore the water supply and check every connection for leaks before restoring power. Run a full test cycle across a few different temperature settings to confirm each fill function works correctly with no leaking. Tools needed: Phillips screwdriver, pliers, work gloves.
Frequently Asked Questions
Does this valve come with the thermistor?
No. This valve no longer comes with the rubber gasket or thermistor that some GE washers use, mounted directly in front of the solenoids. If your old unit has one, you'll need to remove it from the old valve, along with its gasket, and transfer it onto this new valve during installation.
Water has been slowly leaking into my tub even when the washer is off. Is that this valve?
Yes, this is a documented cause. One customer traced over a year of slow leaking directly to this valve's thermistor O-ring, which is known to degrade over time and let water seep through even when the washer isn't running. Replacing the valve (and transferring a good thermistor and gasket if your model uses one) resolves this type of slow leak.
Is this the same as WH13X26534?
No, these are two separate GE valve part numbers with different cross-reference sets, despite the similar numbering. Always confirm the exact part number from your washer's parts diagram or the sticker on your old valve rather than assuming based on a close number match.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured to match the solenoid design, housing, and connection type of the original WH13X26535 valve used in compatible GE, Hotpoint, Haier, Monogram, and Café top-load washers.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DC64-01570A Washer Genuine Door Boot
Rubber boot assembly.
Fits select Samsung front-load washer models.
Replaces Part Numbers: DC64-01570A, DC97-14560A, DC97-14560K, DC97-14560L, AP4342244, PS4211426.
Description: This Washer Door Diaphragm is an essential component for maintaining your washer's functionality. This Genuine replacement part ensures a secure and effective seal, preventing leaks and enhancing the overall performance of your washing machine. Specifically designed for compatibility with a range of Samsung washer models, it guarantees a perfect fit and straightforward installation. Made from durable materials,
