Search results for "dryer thermostat"

XPARTCO 3406105 Dryer Door Switch Replaces WP3406105 The XPARTCO 3406105 is an aftermarket replacement dryer door switch assembly compatible with a wide range of Whirlpool-family dryers including Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Estate, Crosley, Inglis, Admiral, Jenn-Air, Magic Chef, and Norge. The door switch is a safety component mounted inside the dryer cabinet near the door opening. When the door is closed, the door strike depresses the switch actuator, completing the circuit and allowing the dryer to start and run. When the door is opened, the switch opens the circuit and stops the dryer. On models with a broken belt detection circuit, the door switch also plays a role in belt failure detection. A failed door switch causes the dryer to either not start at all or to run continuously with the door open. This is a Single Pole, Double Throw (SPDT) 3-wire switch with stainless steel terminals and a heat-resistant housing. It measures 1-3/4" L x 1-5/8" W x 1-1/4" H with a 7-3/4" wiring harness. Electrical specs are 120-240V, 50-60Hz, 11A, 1/3HP. The kit includes the switch and 3-wire harness assembly. It directly replaces WP3406105, 3406104, 3405104, 3405105, 528947, AP6008560, and several additional cross-reference numbers. Installs in 15–30 minutes with basic hand tools. Quick Answer The XPARTCO 3406105 Dryer Door Switch fixes Whirlpool-family dryers that won't start, won't stop when the door is opened, or require the door to be slammed to start. SPDT 3-wire switch, 120-240V/50-60Hz/11A/1/3HP. Body 1-3/4" L x 1-5/8" W x 1-1/4" H, 7-3/4" harness. Includes switch and harness assembly. Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, and more. Replaces WP3406105, 3406104, 3405104, 528947, AP6008560. Common Problems This Part Fixes Dryer will not start at all — door switch not completing the circuit when door is closed Dryer starts only when the door is slammed or held firmly closed Dryer continues to run after the door is opened — switch not opening the circuit Drum light not turning on when the door is opened (on models with drum light) Dryer starts intermittently — door switch contact worn and making unreliable contact Dryer stops mid-cycle randomly — switch opening the circuit due to vibration or wear Door switch visibly cracked, broken, or the actuator button no longer springs back Replaces Part Numbers This door switch directly replaces the following OEM and cross-reference part numbers: WP3406105, 3405104, 3405105, 3406104, 3406105, WP3406105VP, AWP47182, PD00003898, EAP11741700, AP6008560, PS11741700. If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door switch is compatible with select gas and electric dryers from the following brands: Whirlpool dryers (gas and electric) Kenmore / Sears dryers (Whirlpool-built models) Maytag dryers (gas and electric) KitchenAid dryers Amana dryers Roper dryers Estate dryers Crosley dryers Inglis dryers Admiral dryers Jenn-Air dryers Magic Chef dryers Norge dryers Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Safety switch — prevents dryer from operating when the door is open and stops the dryer immediately when the door is opened mid-cycle Single Pole, Double Throw (SPDT) 3-wire switch — provides both normally-open and normally-closed contacts for dryer start circuit and belt failure detection on compatible models Rated 120-240V, 50-60Hz, 11A, 1/3HP — correct electrical specifications for compatible Whirlpool-family dryers Switch body: 1-3/4" L x 1-5/8" W x 1-1/4" H; wiring harness: 7-3/4" L Stainless steel terminals and heat-resistant housing Kit includes switch and 3-wire harness assembly — complete plug-in replacement Replaces WP3406105, 3406104, 3405104, 3405105, 528947, and AP6008560 Compatible with 13 major appliance brands on the Whirlpool platform Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in 15–30 minutes with basic hand tools Product Specifications Part Number 3406105 OEM Part Number WP3406105 Part Type Dryer Door Switch Assembly (SPDT 3-Wire) Condition Aftermarket Replacement Application Gas and Electric Dryers Switch Type Single Pole, Double Throw (SPDT) Wires 3-wire Voltage 120-240V Frequency 50-60Hz Amperage 11A Horsepower 1/3 HP Switch Body Dimensions 1-3/4" L x 1-5/8" W x 1-1/4" H Harness Length 7-3/4 inches Color Off-White / Black / Gray Material Plastic / Metal (stainless steel terminals) Includes Switch and 3-wire harness assembly Compatible Brands Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Roper, Estate, Crosley, Inglis, Admiral, Jenn-Air, Magic Chef, Norge Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power (and shut off gas for gas dryers) before beginning. The door switch is located inside the dryer cabinet near the door opening, typically mounted in the front panel or top panel. Access it by inserting a putty knife under the top panel to release the spring clips and lift the top, then release the front panel. Locate the old door switch — it is a small rectangular component with a spring-loaded actuator button. Photograph the wiring connections before disconnecting. Disconnect the 3-wire harness from the old switch. Release the switch from its mounting bracket by pressing the retaining tabs and pulling the switch free, or unscrewing the mounting screw. Snap the new 3406105 switch into the mounting bracket and reconnect the 3-wire harness in the same positions. Reassemble the front and top panels, restore power, and run a test cycle to confirm the dryer starts, stops when the door is opened, and runs normally. Tools needed: Phillips screwdriver, putty knife. Frequently Asked Questions What does the dryer door switch do? The door switch is a safety component that monitors whether the dryer door is open or closed. When the door is closed, the door strike depresses the switch actuator, completing the electrical circuit and signaling the control board that it is safe to run. When the door is opened, the actuator releases, opening the circuit and stopping the dryer immediately. On many Whirlpool-family dryers, the 3-wire SPDT switch also provides a secondary circuit used for broken belt detection — one of the switch's contacts is part of the motor start circuit, while the other is part of a safety cutoff circuit. How do I test the door switch with a multimeter? Unplug the dryer and disconnect the switch from the harness. Set your multimeter to continuity mode. The 3406105 is an SPDT switch with three terminals — typically labeled Common (C), Normally Open (NO), and Normally Closed (NC). With the actuator button not pressed (door open position), you should read continuity between C and NC, and no continuity between C and NO. With the actuator button pressed (door closed position), you should read continuity between C and NO, and no continuity between C and NC. Any deviation from this pattern confirms the switch has failed. What is the difference between 3406105 and 3406104? The 3406104 was the original part number, and the 3406105 (later updated to WP3406105) is the current replacement that superseded it. They are the same door switch and are fully interchangeable. The 3405104 and 3405105 are also cross-references for this same switch from earlier production. If your dryer's documentation or old switch label shows any of these numbers, the 3406105 is the correct current replacement. Why does this switch have 3 wires when my old switch only had 2? The WP3406105 is an SPDT (Single Pole, Double Throw) switch with 3 terminals — Common, Normally Open, and Normally Closed. Some older dryer models used a simpler 2-wire switch, but the 3-wire WP3406105 is the updated replacement that works on both older and newer models. On models that originally had a 2-wire switch, only two of the three terminals are used — the third is simply left unconnected. Follow your model's wiring diagram or take a photo of the original switch's wire connections before removing it. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured from durable plastic and metal with stainless steel terminals to match the dimensions and electrical specifications of the original WP3406105 door switch assembly. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO (2 Pack) EXP570 Dryer Door Latch Kit The XPARTCO (2 Pack) EXP570 is a two-kit set of aftermarket replacement door catch and strike kits for dryers from Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis, LG, and other comparable brands. The catch and strike work as a pair: the strike on the dryer door engages the catch on the cabinet to hold the door shut for the whole cycle. When either part wears, cracks, or gets knocked out of alignment, the door stops latching reliably. It may not stay closed, it may pop open mid-cycle and let heat escape, or the dryer may refuse to start because it doesn't register the door as closed. This 2-pack includes 2 kits, for a total of 2 door catches and 2 strikes. Each kit has 1 door catch and 1 strike, so you can replace the full latch set in one repair rather than guessing which half is worn, and keep a second kit for another dryer or a future repair. Because this latch design was used across several appliance families, the kit carries a long cross-reference list covering Whirlpool, Frigidaire, GE, LG, and Alliance-built part numbers; see the Replaces list below. Quick Answer The XPARTCO (2 Pack) EXP570 Dryer Door Latch Kit fixes a dryer door that won't stay closed, opens mid-cycle, or an open-door condition that keeps the dryer from starting, caused by a worn or damaged catch and strike. This 2-pack includes 2 kits (2 door catches and 2 strikes). Fits Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis, and LG dryers. Classic symptom: the door swings open on its own, or you have to hold it shut to get the dryer to run. Common Problems This Part Fixes Dryer door won't stay closed Door pops open in the middle of a cycle Dryer won't start because the open-door condition isn't clearing Worn, cracked, or damaged catch or strike Heat escaping around the door, leaving clothes damp Door that no longer latches with a firm, positive click Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door latch kit directly replaces the following part numbers: 5366021400, 5303207102, AP2153772, PS475419, AP2137890, PS455020, LA-1003, LA1003, PS2162263, AP4242465, WE1M1011, WE1X1192, WE1M536, WE1X1195, WE01X1158, WE01X10023, WE01X10188, WE01X10184, AP5324728, PS3502777, AP2042206, PS266893, AP5324728, PS3502777, AP2042209, PS266896, AP2042175, PS266861, AP2042031, PS264343, AP3775568, PS959860, AP5238145, PS959856, WE1X1194, PS266895, AP2042208, WE1M1011, WE1X1192, WE1M536, WE1X1195, WE01X1158, WE01X10023, WE01X10188, WE01X10184, AP5324728, PS3502777, AP2042206, PS266893, AP5324728, PS3502777, AP2042209, PS266896, AP2042175, PS266861, AP2042031, PS264343, AP3775568, PS959860, AP5238145, PS959856, 4027EL2001A, 4026EL3001A, PS3522845, AP5238145, AP5242421, PS3522822, 00491624, AP3735937, PS959856, 5366021400, 5303207102, AP2153772, PS475419, AP2137890, PS455020, 279570 This latch kit was sold under the part numbers of several manufacturers: Whirlpool and Maytag (279570), Frigidaire and Electrolux (5303207102), GE (WE01X10023 and related), LG (4027EL2001A, 4026EL3001A), and Alliance-built dryers (LA-1003). The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical parts. Compatibility This latch kit is used on dryer models from the following brands: Whirlpool, Kenmore (Whirlpool-built), Maytag, Amana, Roper, Estate, and Inglis dryers Frigidaire, Electrolux, and Kenmore (Frigidaire-built) dryers GE and Hotpoint dryers Select LG and Kenmore (LG-built) dryers Select Crosley, Norge, and Speed Queen dryers Note: This kit fits specific models within each brand, not every dryer a brand has made, and the latch design differs between manufacturers. Match the number on your old catch and strike, or on your dryer's parts diagram, against the Replaces list above rather than relying on brand alone. Contact our support team with your model number and we'll verify fit before you order. If only the catch needs replacing, see our single EXP571 Dryer Door Catch. Key Features 2-pack of aftermarket replacement dryer door latch kits, each with 1 door catch and 1 strike Replaces both halves of the latch in one repair Restores a secure door closure so heat stays in and the dryer runs efficiently Resolves doors that won't stay shut, open mid-cycle, or trigger an open-door no-start Cross-references to Whirlpool, Frigidaire, GE, LG, and Alliance OEM numbering 2 kits per order (2 door catches and 2 strikes in total) Product Specifications Part Number EXP570 (2 Pack) OEM Part Number 279570, 5303207102, WE01X10023, 4027EL2001A Part Type Dryer Door Latch Kit (Door Catch & Strike) Condition Aftermarket Replacement Kit Contents 1 Door Catch & 1 Strike per Kit Quantity 2 Kits (2 Door Catches & 2 Strikes) Application Whirlpool, Kenmore, Maytag, Amana, Roper, Estate, Frigidaire, GE, Hotpoint, Inglis & LG Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker before beginning. Open the door and inspect the old catch on the cabinet and the strike on the door for cracks, wear, or loose mounting. Remove the old catch and strike, keeping track of how each one is oriented and mounted. Fit the new catch and strike in the same positions and fasten them securely. Close the door and confirm it latches with a firm click, stays shut, and lines up evenly with the cabinet. If the door still won't seat properly after the swap, check the door hinges and alignment, since a misaligned door can wear out new latch parts quickly. Frequently Asked Questions My dryer door won't stay shut — is this the part I need? Very likely. A worn or damaged catch or strike is a common reason a dryer door won't latch or pops open mid-cycle. Inspect both parts for cracks or wear. Because the two work as a pair, replacing both at once is the surest fix. My dryer won't start and seems to think the door is open. Could this be the cause? It can be. If the door isn't latching fully, the dryer may not register it as closed. If the latch looks fine and the door closes firmly but the dryer still won't start, the door switch may be the problem instead. What's included in the kit? This 2-pack includes 2 kits, and each kit has 1 door catch and 1 strike, so you get 2 catches and 2 strikes in total. If you only need the catch, we also offer it separately as the EXP571 Dryer Door Catch. Will this fit my Whirlpool, Frigidaire, GE, or LG dryer? This kit is cross-referenced to part numbers from all of those brands, but it fits specific models rather than every dryer. Match the number on your old latch parts or parts diagram against the Replaces list, or contact our support team with your model number and we'll confirm before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WR55X10025 Refrigerator Temperature Sensor The XPARTCO WR55X10025 is an aftermarket replacement refrigerator temperature sensor (thermistor) compatible with a wide range of GE, Hotpoint, Haier, Café, and Monogram refrigerators. The temperature sensor monitors air temperature inside the fresh food and freezer compartments and sends that data to the main control board, which uses it to regulate cooling cycles and maintain the correct set temperature. When the sensor fails, the refrigerator may run too warm, too cold, or experience erratic defrost behavior. This sensor measures approximately 1-1/4 inches long and includes 18-inch wire leads. It is constructed from white plastic and is used in both fresh food and freezer compartments depending on the model — on some models it also functions as a defrost sensor on the evaporator coil. It directly replaces OEM part numbers WR55X10025 and a large number of earlier GE thermistor part numbers. Sold individually — some models require two sensors. Installs in under 30 minutes with basic hand tools. Quick Answer The XPARTCO WR55X10025 Refrigerator Temperature Sensor fixes GE and Hotpoint refrigerators that are too warm, too cold, not defrosting, or over-defrosting. The thermistor monitors compartment temperature and communicates with the control board. Approx. 1-1/4" long with 18" leads, white plastic. Compatible with GE, Hotpoint, Haier, Café, and Monogram refrigerators. Sold individually. Common Problems This Part Fixes Refrigerator compartment running too warm — food spoiling faster than normal Refrigerator running too cold — food or liquids freezing in the fresh food section Freezer section not maintaining correct temperature Refrigerator not defrosting or defrosting too frequently Excessive frost or ice buildup on evaporator coils Refrigerator and freezer both warming up after extended defrost cycles Erratic cooling — temperatures fluctuating unpredictably Replaces Part Numbers This temperature sensor directly replaces the following OEM and cross-reference part numbers: WR55X10025, 914093, WR50X10027, WR50X10034, WR50X10055, WR50X10067, WR55X10025-50PK, WR55X10025B, WR55X10026, WR55X10027, WR55X10028, WR55X10030, WR55X10087, WR55X10088, WR55X10089, WR55X10367, WR55X10380, WR55X10661, WR55X10711, WR55X10735, WR55X10736, WR55X10737, WR55X10937, WR55X10938, WR55X10939, WR55X11121, WR55X11141, WR55X11151, WR55X11152, AH304103, EA304103, OEM9556230, AP3185407, EAP304103, AGE29661, PD00000992, PS304103 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This temperature sensor is compatible with select refrigerators from the following brands: GE refrigerators (side-by-side, French door, top-freezer, and bottom-freezer) Hotpoint refrigerators Haier refrigerators (select GE-platform models) Café refrigerators Monogram refrigerators Note: Some GE refrigerator models use two or more temperature sensors. This part is sold individually. Check your model's parts diagram or contact our support team to confirm how many sensors your model requires before ordering. Key Features Monitors fresh food and freezer compartment temperatures and communicates readings to the main control board Also functions as a defrost sensor on the evaporator coil on applicable models Fits both fresh food and freezer positions White plastic construction — durable and resistant to refrigerator temperature extremes Direct replacement for WR55X10025 and over 30 earlier GE thermistor part numbers Compatible with GE, Hotpoint, Haier, Café, and Monogram refrigerators Sold individually — verify quantity needed for your model before ordering Aftermarket replacement built to OEM-equivalent quality standards Quick DIY repair — installs in under 30 minutes with basic hand tools Product Specifications Part Number WR55X10025 Part Type Refrigerator Temperature Sensor (Thermistor) Condition Aftermarket Replacement Application Fresh food compartment, freezer compartment, and evaporator coil (defrost sensor) depending on model Sensor Body Length Approximately 1-1/4 inches Color White Material Plastic Includes Sensor with wire leads Sold As Single sensor (some models require 2 — verify before ordering) Compatible Brands GE, Hotpoint, Haier, Café, Monogram Installation Notes ⚠️ Unplug Refrigerator Before Starting Unplug the refrigerator from the power outlet before beginning any repair. To access the fresh food thermistor, locate the sensor on the left wall of the fresh food compartment — it may be clipped into a housing or bracket. Disconnect the wire connector and pull the old sensor out of its bracket. Slide the new WR55X10025 sensor into the bracket and reconnect the wire connector. To access the freezer or evaporator thermistor, remove the freezer shelves and back panel, then locate the sensor clipped to the evaporator coil bracket. Remove any tie wrap securing the sensor, pull the old sensor from the bracket, insert the new sensor, and reconnect the wire connector. Reinstall the back panel and shelves, restore power, and verify the refrigerator returns to the correct set temperature. Tools needed: Phillips screwdriver, flat pry tool (for panel clips), work gloves. Frequently Asked Questions How many temperature sensors does my GE refrigerator have? The number of sensors varies by model. Many GE French door and side-by-side refrigerators use two or three WR55X10025 sensors — one in the fresh food compartment, one in the freezer, and sometimes one on the evaporator coil. Check your model's parts diagram or contact our support team with your model number to confirm how many you need before ordering. What is a thermistor and how does it work? A thermistor is a type of resistor whose electrical resistance changes with temperature. The main control board sends a small voltage through the thermistor and measures the resistance — a higher resistance means a lower temperature, and a lower resistance means a higher temperature. The board uses this reading to decide when to run the compressor and fans to maintain the set temperature. A failed thermistor sends incorrect readings, causing the refrigerator to over-cool, under-cool, or malfunction during defrost cycles. Can a faulty temperature sensor cause the refrigerator to not defrost? Yes. On models where the WR55X10025 also serves as the defrost sensor on the evaporator coil, a faulty sensor can cause the control board to incorrectly time or skip defrost cycles entirely — leading to excessive frost or ice buildup on the evaporator coils. This frost buildup can eventually block airflow and cause both the refrigerator and freezer sections to warm up. How do I know if my temperature sensor is the cause of my cooling problem? The most reliable way to test the thermistor is with a multimeter. Disconnect the sensor and measure its resistance at room temperature — a working WR55X10025 should read approximately 16,000 ohms at 32°F, dropping as temperature increases. An open circuit (infinite resistance) or short circuit (zero resistance) reading confirms the sensor has failed. If resistance is within the normal range but the refrigerator still has issues, the control board or other components may be at fault. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine GE OEM part, but is manufactured from durable plastic to match the dimensions and performance specifications of the original WR55X10025 temperature sensor. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout  

Read more less

WE04X28977 Dryer Genuine Door Switch The WE04X28977 is a genuine GE dryer door switch for GE and Hotpoint dryers, and also fits select Haier, Monogram, and Café models built on the GE platform. This small latch-style switch communicates with the control board when the door is fully closed, allowing the drying cycle to safely begin, and signals the control board to stop the cycle if the door is opened during operation. White in color, measuring approximately 3"H x 2"W, weighing about 1 lb. Also known by the part number WE10X23879. Over time, this switch can become damaged from extended use or excessive force when closing the door. Symptoms of a failing door switch include the dryer failing to start, or the door not closing or latching properly. Replacing this switch requires a few basic tools and some slight disassembly of the dryer. It directly replaces WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948. Quick Answer The WE04X28977 Dryer Genuine Door Switch fixes GE, Hotpoint, Haier, Monogram, and Café dryers that won't start or have a door that won't close or latch properly. White, small latch style, ~3"H x 2"W, ~1 lb. Replaces WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948. This is a dryer part — it's sold individually and typically requires removing the front panel for access. Common Problems This Part Fixes Dryer won't start Door won't close or latch properly Dryer stops mid-cycle when the door is bumped or jostled Switch damaged from excessive force when closing the door Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This dryer door switch directly replaces the following OEM and cross-reference part numbers: WE04X28977, WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948 If your part number is not listed above, contact our support team before ordering and we will verify compatibility. Compatibility This door switch is compatible with select GE dryers, and also fits select Hotpoint, Haier, Monogram, and Café dryers built on the GE platform, including model numbers such as GTD42GASJ2WW, GTD45EASJ1WS, GTD45EASJ0WS, GTD45EASJ2WS, GTD42EASJ1WW, GTD42GASJ1WW, GTD72EBSN0WS, GTX22GASK0WW, GTD45GASJ2WS, GTD45GASJ1WS, GTX22EASK0WW, GTD42EASJ2WW, GTD42EASJ0WW, GTD42GASJ0WW, GTD72EBPN0DG, GTD45GASJ0WS, PTD60EBPR0DG, YTD74E2SN0WS, YTD74E2PN0DG, GTD84ECPN1DG, GTX52GASP0WB, PTD60GBSR0WS, GTD84GCPN0DG, VTD52EASR0WB, GTD84GCPN1DG, GTD84ECPN0DG, YTD74G2PN1DG, GTD84GCSN0WS, YTD74G2PN0DG, PTD60EBSR0WS, YTD74E2PN1DG, PTD60GBPR0DG, YTD74E2SN1WS, GTD84GCSN1WS, GTD65EBSJ4WS, VTD52GASR0WB, GTD84ECSN0WS, YTD74G2SN0WS, GTD84ECSN1WS, YTD74G2SN1WS, GTX52EASP0WB, HTX24GASK0WW, HTX24GASK0WS, HTX21EASK0WW, HTX21PASK0WW, HTX24EASK0WS, HTX24EASK0WW, HTX21GASK0WW, GTX65EBSJ2WS, GTD75ECPL0DG, GTD75GCPL0DG, GTD65GBSJ4WS, GTX42GASJ1WW, GTX65GBSJ2WS, GTD33PASK0WW, GTX33EASK0WW, GTX33GASK0WW, GTX60EBSJ0WS, GTD65EBSJ0WS, GTD65EBSJ3WS, GTX42EASJ1WW, 5TX62E9ST0WS, 5TX62E9ST1WS, 5TX62G9ST0WS, and ETD48EASW0WB. Note: This is a dryer part, sold individually. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure. Key Features Genuine GE OEM part — factory-specified switch design Small latch-style door switch — communicates door status to the control board Resolves "won't start" and "door won't close" symptoms caused by switch failure White, approximately 3"H x 2"W, about 1 lb Also known as WE10X23879 Direct drop-in replacement matching the original mounting Replaces WE10X23879, 4931170, AGE25215, AP6889035, EAP12722948, PD00053592, PS12722948 Compatible with GE, Hotpoint, Haier, Monogram, and Café dryers Genuine OEM replacement — guaranteed fit, materials, and performance Sold individually Product Specifications Part Number WE04X28977 Also Known As WE10X23879 Part Type Dryer Door Switch (Small Latch Style) Condition Genuine OEM Brand GE Color White Height Approx. 3" Width Approx. 2" Weight Approx. 1 lb Repair Difficulty Easy to Moderate — front panel removal required Quantity 1 door switch (sold individually) Compatible Brands GE, Hotpoint, Haier, Monogram, Café Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Turn the two screws located at the bottom corners of the front panel counter-clockwise until they come out, then slide the panel up and off the dryer to access the door switch. Locate the wires connected to the old door switch and disconnect them, noting their positions. Remove the mounting screws or clips securing the old switch and pull it free. Install the new WE04X28977 in the same position, reconnect the wires to their original positions, and secure the mounting hardware. Slide the front panel back into place and secure the two bottom corner screws. Restore power and test that the dryer starts normally with the door closed, and stops if the door is opened during a cycle. Tools needed: screwdriver, wrench, pliers. Frequently Asked Questions My dryer won't start. Is this the part I need? Yes, this is one of the most common symptoms of a failed door switch. Since this switch tells the control board whether the door is closed, a damaged or malfunctioning switch can prevent the dryer from starting even when the door is fully shut. My dryer door won't close properly. Could this be the same part? Yes, a damaged door switch — often from excessive force when closing the door over time — can cause the door to not latch or close correctly, in addition to preventing the dryer from starting. Is this a difficult repair? It's a straightforward repair for a confident DIYer, requiring a screwdriver, wrench, and pliers, along with some slight disassembly of the dryer's front panel to access the switch. Is this an OEM or aftermarket part? This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original switch design and mounting configuration of the door switch originally installed in your dryer. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 279457 Dryer Heating Element Wire Kit The XPARTCO 279457 is an aftermarket replacement heating element connection wire kit for Whirlpool, Kenmore, Maytag, and KitchenAid electric clothes dryers. This kit includes 2 connecting wires and 2 wire connectors that join the dryer's wiring harness to the heating element terminals. Because these connections carry the full current draw of the heating circuit, they're a common failure point — the terminals and wire insulation gradually degrade from repeated heat cycling, and a loose or corroded connection creates resistance that generates even more heat, which can melt the wire insulation or the connector itself. This kit is the correct fix when you find burnt, melted, or brittle wiring at the heating element terminals rather than a fully failed heating element — replacing just the connection wiring is far cheaper than replacing the whole element when the element itself still tests good. Quick Answer The XPARTCO 279457 Heating Element Wire Kit fixes a dryer with no heat, inadequate heat, or overheating caused by burnt or melted wiring at the heating element connection — not a failed heating element itself. Includes 2 connection wires and 2 wire connectors. Classic symptom: a burning smell, or visibly melted/discolored wire insulation near the heating element terminals. Common Problems This Part Fixes Dryer not heating or producing inadequate heat Dryer overheating or heat cycling erratically Visibly melted, burnt, or discolored wires at the heating element connection Burning smell during operation Intermittent heating caused by a loose or corroded connection Heating element itself tests fine but the dryer still won't heat properly Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This wire kit directly replaces the following part numbers: 279457, 279457VP, 3140, T2502, AP3134638, AWP39894, EAP334206, PD00002893, PS334206 We were not able to confirm additional cross-reference numbers beyond these at this time. If you have one, contact our support team before ordering and we will verify compatibility. Compatibility This wire kit is compatible with a wide range of Whirlpool, Kenmore, Maytag, and KitchenAid electric clothes dryers, including models such as: TEDX640JQ1, WED5620HW1 Numerous additional Whirlpool-built electric dryer models using the 279457 connection kit Note: This kit has also been referenced for use with heating element 4391960 in some sourcing. This is a connection wire kit — it does not include a heating element itself. Confirm your model number against your dryer's parts diagram, or contact our support team to verify fit before ordering. Key Features Direct-fit aftermarket heating element connection wire kit Includes 2 connection wires and 2 wire connectors Resolves melted/burnt-wire, no-heat, and overheating symptoms caused by a bad connection Lower-cost fix than replacing the heating element when the element itself tests good Fits Whirlpool, Kenmore, Maytag, and KitchenAid electric dryers Straightforward swap — typically 15–60 minutes with basic hand tools Product Specifications Part Number XP279457 OEM Part Number 279457 Part Type Dryer Heating Element Connection Wire Kit Condition Aftermarket Replacement Kit Contents 2 Connection Wires & 2 Wire Connectors Application Whirlpool, Kenmore, Maytag & KitchenAid Electric Dryers Installation Notes ⚠️ Unplug Power Before Installing — High-Current Connection Unplug the dryer or switch off its circuit breaker before beginning — this connection carries the full current of the heating circuit and must never be serviced live. Remove the dryer's rear or front panel per your model's service guide to access the heating element. Inspect the existing connection wires and terminals for melting, discoloration, or brittleness — if you see any of these signs, replace both wires and connectors entirely rather than reusing any part of them. Disconnect the two old connection wires from the heating element terminals, install the two new wires in their place, and secure each wire connector firmly so both connections are tight with no exposed bare wire. A loose or poor connection is the most common root cause of this failure in the first place, so double-check the fit on both connections before closing the dryer back up. Frequently Asked Questions Do I need a new heating element, or just this wire kit? If the heating element itself tests good with a multimeter but you see melted, burnt, or discolored wiring specifically at the connection point, this wire kit alone is usually the correct and much cheaper fix. If the element itself has failed (no continuity), you'll need to replace the heating element too. Why did my heating element wires melt in the first place? This usually happens when a connection becomes loose or corroded over time, which increases electrical resistance at that point. That resistance generates extra heat right at the connection, which can melt the wire insulation or the connector. Make sure the new connection is seated tight and secure to prevent it from happening again. How many wires and connectors are in this kit? This kit includes 2 connection wires and 2 wire connectors — enough to replace both terminal connections on the heating element in one kit, per the original manufacturer specification. Is this safe to install myself? Most DIY-capable owners can complete this repair with basic hand tools in under an hour. That said, always unplug the dryer or shut off its breaker before working on it, since this connection carries the full current of the heating circuit — never work on it while the dryer is powered. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO 12138200000320 Dryer Door Catch The XPARTCO 12138200000320 is an aftermarket replacement dryer door catch compatible with select Midea and Insignia dryers. The door catch is a small plastic spring-clip mechanism mounted on the dryer door that snaps over the door strike o12138200000320 n the cabinet opening to hold the door firmly closed during operation. When the door is closed and latched, the door switch is activated — signaling the control board that it is safe to run. When the catch breaks, cracks, or loses its spring tension, the door will not stay closed, the door switch will not activate properly, and the dryer will either not start or will stop mid-cycle. This is a snap-in replacement catch — the color or exact finish may vary by production run. It directly replaces AP7152622 and PS18161385. Sold individually. Installs in under 5 minutes — no tools required in most cases. Quick Answer The XPARTCO 12138200000320 Dryer Door Catch fixes Midea and Insignia dryers where the door won't stay closed, pops open during a cycle, or where the dryer won't start because the door switch isn't being activated. Snap-in installation — no tools required, installs in under 5 minutes. Sold individually. Replaces AP7152622, PS18161385. Common Problems This Part Fixes Dryer door will not stay closed during the drying cycle Door pops open mid-cycle, stopping the dryer Dryer will not start — door switch not being activated by a worn or broken catch Door feels loose or does not click shut firmly when closed Door catch visibly cracked, broken, or missing Dryer requires the door to be held or pushed to stay running Replaces Part Numbers This door catch directly replaces the following part numbers: 12138200000320, AP7152622, PS18161385. Contact our support team with your model number if you need confirmation before ordering. Compatibility This door catch is compatible with select dryers from the following brands: Midea dryers (gas and electric — select models) Insignia dryers (select models) Always verify your appliance model number before ordering. Contact our support team if you're unsure. Key Features Holds the dryer door closed and activates the door switch so the dryer can run safely Snap-in installation — no tools required in most cases; installs in under 5 minutes Durable plastic construction — designed to withstand repeated opening and closing Sold individually — one door catch per order Replaces AP7152622 and PS18161385 Aftermarket replacement built to OEM-equivalent quality standards Product Specifications Part Number 12138200000320 Part Type Dryer Door Catch (Door Latch Clip) Condition Aftermarket Replacement Application Gas and Electric Dryers Material Plastic Installation Snap-in — no tools required Sold As Single door catch Compatible Brands Midea, Insignia Installation Notes ⚠️ Unplug Dryer Before Starting Disconnect power before beginning. Open the dryer door and locate the old door catch — it is a small plastic clip mounted on the inside of the door or on the cabinet opening around the door. Press the tabs on the old catch to release it from its mounting slot and pull it free. Note the orientation before removing. Insert the new 12138200000320 catch into the slot in the same orientation and press firmly until it snaps into place. Close the door to confirm it latches securely. Restore power and run a short cycle to verify the door stays closed and the dryer operates normally. Tools needed: None in most cases; a small flat-head screwdriver may help with removal. Frequently Asked Questions What dryers is the 12138200000320 compatible with? The 12138200000320 door catch is used on select Midea and Insignia dryer models. Insignia is a Best Buy house brand whose appliances are manufactured by Midea. Always verify your exact model number before ordering to confirm this catch fits your dryer's door latch assembly. Why won't my dryer start even though I'm closing the door? If the door catch is broken or worn, the door may not be engaging the door switch firmly enough to signal the control board that the door is closed. Most dryers will not run unless the door switch is fully activated. Replacing the 12138200000320 catch restores the firm snap needed to trigger the switch. If replacing the catch does not resolve the start issue, the door switch itself may also need to be checked. Do I need to replace the door strike as well? Not necessarily. In most cases only the door catch (the spring-clip on the door) needs replacement. The door strike (the post or tab on the cabinet that the catch snaps onto) is typically more durable. Inspect the strike for cracks or breakage before ordering — if it is intact, just the 12138200000320 catch is all you need. Is this an OEM or aftermarket part? This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Midea OEM part, but is manufactured from durable plastic to match the dimensions and function of the original 12138200000320 door catch. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

5303917625CM Refrigerator Defrost Thermostat L47-22F tube mount with bullet connectors. Fits Electrolux refrigerator. Replaces Part Numbers: 5303917625, 08000805, 3001234, 3015138, 3916083, 5308000805, 636974, 8000805, AH468968, EA468968, G000166153, AP2592599, PS468968.   This is an aftermarket part that can be used as a replacement for the OEM part. California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

ERP 3406108 Dryer Door Switch  Replaces Part Numbers: WP3406108, 3406108, PS11741702, AP6008562  Description: This Door Switch is a replacement part for select Whirlpool dryer models. It is responsible for detecting whether the dryer door is open or closed. When the door is closed, the switch allows the dryer to operate. Conversely, if the door is open, the switch interrupts the electrical circuit to prevent the dryer from running, ensuring safety during use. Fits Models:   LTE5243DQ1 , LTE5243DQ2 , LTE5243DQ3 , LTE5243DQ4 , LTE5243DQ5 , LTE5243DQ6 , LTE5243DQ7 , LTE5243DQ8 , LTE5243DQ9 , LTE5243DQA , LTE5243DQB , LTE5243DT2 , LTE5243DT3 , LTE5243DT4 , LTE5243DT5 , LTE5243DT6 , LTE5243DT7 , LTE5243DZ1 , LTE5243DZ2 , LTG5243DQ1 , LTG5243DQ2 , LTG5243DQ3 , LTG5243DQ4 , LTG5243DQ5 , LTG5243DQ6 , LTG5243DQ7 , LTG5243DQ8 , LTG5243DQ9 , LTG5243DQA , LTG5243DQB , LTG5243DQC , LTG5243DT2 , LTG5243DT3 , LTG5243DT4 , LTG5243DT5 , LTG5243DT6 , LTG5243DT7 , LTG5243DT8 , LTG5243DZ1 , LTG5243DZ2 , WET4024EW0 , YLTE5243DQ2 , YLTE5243DQ3 , YLTE5243DQ4 , YLTE5243DQ5 , YLTE5243DQ6 , YLTE5243DQ7 , YLTE5243DQ8 , YLTE5243DQ9 , YLTE5243DQA , YLTE5243DQB , YWET4024EW0. This is an aftermarket part that can be used as a replacement for the OEM part. 

Read more less

WE4X444 Gas Dryer Genuine Igniter Replaces Part Numbers:WE4X444, WE04X0444, WE11X0096, WE4X444R, AH268028, EA268028, OEM8170538, AP2042634, PS268028, WP4392003, 4392003, 14200046, 3-3376, 303376, 41-982, 4392003BULK, 55438, 55438-6, 63-5010, 63-5877, DE350, K35-106, K35-368, R0611505, OEM24037398, AP6009349, PS11742507. Description: This Gas Dryer Igniter is a replacement part for specific GE, Hotpoint, Whirlpool dryer models. This essential component is responsible for igniting the gas in the burner, allowing the dryer to heat up and effectively dry your clothes. The igniter heats up to a high temperature to ignite the gas, starting the heating process necessary for drying.   California Residents only WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov

Read more less

Genuine OEM W11511154 Dryer Drive Motor The W11511154 is a genuine OEM dryer drum drive motor from Whirlpool, with the pulley for the drum belt included. It is the motor that turns the drum through the drive belt and also drives the blower that moves air through the dryer. When it fails or weakens, the dryer may not start, hum without turning, run loudly, stop partway through a cycle, or leave clothes damp because the drum or airflow isn't running properly. This is a genuine OEM part, not an aftermarket equivalent, so the fit and the motor match what came with the dryer. It replaces several earlier Whirlpool drive motor numbers, including W11364931 and W11086656, both of which are now replaced by this number. Quick Answer The Genuine OEM W11511154 Dryer Drive Motor fixes a Whirlpool-built dryer that won't start, hums but the drum won't turn, runs noisily, or stops mid-cycle because the drive motor has failed. Genuine OEM from Whirlpool, with the pulley for the drum belt included. Classic symptom: you hear a hum or nothing at all when the dryer should be tumbling, even though the belt and power are fine. Common Problems This Part Fixes Dryer won't start, or hums without turning the drum Drum stops turning during a cycle Loud grinding, squealing, or rumbling from the motor area Weak airflow or damp clothes from a failing blower drive Dryer cycles interrupted by a motor that overheats or fails Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This drive motor replaces the following part numbers: W11511154, W11364931, W11086656, WPW10620755, W10620755, W10806758, W10806760, W11123147, W11322192, W11483444, W11493867, W11778635, W11322192, S58TVMZS-7220, Model S58SVMZS-7215, 524AF, AP6997567, AWP466032, FIX16227121, PD00095778, PS16227121 W11511154 is Whirlpool's current number for this motor. The earlier numbers above, including W11364931 and W11086656, have been superseded by it. The source list continues beyond those shown, so additional numbers may exist. Compatibility This drive motor is listed for dryers from: Whirlpool Maytag Amana Crosley Inglis Note: No full model list is published for this motor, and drive motors differ between dryer platforms. Confirm fit by matching the number on your old motor or your parts diagram against the Replaces list, or contact our support team with your model number and we'll verify before you order. Key Features Genuine OEM Whirlpool dryer drive motor, not an aftermarket equivalent Includes the pulley for the drum belt Current number, superseding W11364931, W11086656, and other earlier Whirlpool drive motors Restores drum rotation and blower airflow Product Specifications Part Number W11511154 OEM Part Number W11511154 Part Type Dryer Drum Drive Motor Condition Genuine OEM Manufacturer Whirlpool Included Motor with Pulley for Drum Belt Application Select Whirlpool, Maytag, Amana, Crosley & Inglis Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker, and shut off the gas supply first if it's a gas model. Following your model's service guide, remove the panels needed to reach the motor at the bottom of the cabinet. Take note of the belt routing, then release the drum belt and disconnect the motor's wiring harness. Remove the mounting hardware and take out the old motor. Install the new motor in the same position, make sure the pulley is on the shaft and aligned, and reconnect the wiring. Refit the drum belt following the original routing, replace the panels, and run the dryer to confirm the drum turns smoothly. It's a good time to check the belt and idler pulley for wear, since they affect the new motor's life. Frequently Asked Questions My dryer hums but the drum won't turn. Is this the part I need? It could be the motor, but a broken drum belt is a more common cause. Open the dryer and check that the belt is intact and the drum turns by hand. If the belt and idler pulley are fine and the motor hums or doesn't run, the drive motor is the likely cause. Does it include the pulley? Yes. The motor comes with the pulley for the drum belt. My old motor is marked W11364931 or W11086656. Will this work? Yes. Both numbers are on the Replaces list and have been replaced by W11511154. Is this a genuine Whirlpool part? Yes. This is a genuine OEM Whirlpool part, not an aftermarket equivalent. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

XPARTCO WE03X37317 - WE03X37318 Dryer Drum Glide Set The XPARTCO WE03X37317 - WE03X37318 is an aftermarket replacement drum glide set for GE and Hotpoint dryers, also used on select Whirlpool and Kenmore dryers and washer-dryer combos. These plastic bearing slides are the wear pads at the front of the dryer that the drum rides on as it turns. As they wear down, the drum no longer sits and rolls smoothly, and the dryer starts to squeak, squeal, or rumble. In worse cases the drum catches or drags, and clothes can get snagged or marked between the drum and the front frame. This set pairs both glide types used on these dryers: the WE03X37317 and the WE03X37318 front bearing slides. Because the slides wear at the same rate, replacing them together restores smooth, quiet drum rotation and avoids a repeat repair. Easy to install, typically 30–60 minutes. Quick Answer The XPARTCO WE03X37317 - WE03X37318 Drum Glide Set fixes a GE or Hotpoint dryer that squeaks, squeals, or rumbles loudly as the drum turns, or whose drum drags or catches. Replaces both the WE03X37317 and WE03X37318 front bearing slides. Classic symptom: a loud squeal or scraping noise from the drum area that gets worse over the cycle, sometimes with marks or snags on clothes. Common Problems This Part Fixes Loud squeaking, squealing, or scraping noise while the drum tumbles Drum not spinning smoothly, or dragging and catching Marks, wrinkles, or snags on clothes from items catching between the drum and the front frame Excessive drum noise during drying cycles Visibly worn, thin, or chewed-up plastic glides at the front of the drum Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This glide set replaces the following part numbers: WE03X37317, WE1M1067, WE01M0316, WE03X37317-50PK, WE1M1067-100PK, WE1M316, WE1M481, WE1M507, AGE25692, AP5668531, AP7217723, FIX17137203, PD00089026, PS6447706, PS17137203, WE03X37318, WE1M504, WE01M0333, WE1M333, TJDE504, TJWE1M333, DE504, DE775, TJDE775, AH755842, EA755842, ERWE1M333, AGE25703, AP7217724, PD00088960, PS17137205 The first group of numbers (WE03X37317, WE1M1067, WE1M316, WE1M481, WE1M507, AP7217723, PS17137203) is for the gray glide. The second group (WE03X37318, WE1M504, WE01M0504, WE01M0333, WE1M333, AP7217724, PS17137205) is for the white glide. The AP/PS-prefixed numbers are third-party catalog cross-references for the same physical parts. Compatibility These glides are used on GE, Hotpoint, Whirlpool, and Kenmore dryers and washer-dryer combos, including models such as: GE 61140418, 61140419, 61148418, 61148419 Numerous additional GE and Hotpoint dryer and washer-dryer combo models Note: These glides fit a wide range of models, so the list above is only a sample. Compare the glides in your dryer, or your parts diagram, against the Replaces list above, or contact our support team with your model number and we'll verify fit before you order. Key Features Aftermarket replacement drum glide set covering both the WE03X37317 and WE03X37318 front bearing slides Durable plastic bearing slides that let the drum rotate smoothly Resolves squeaking, squealing, and dragging drum symptoms Helps prevent clothes from being marked or snagged at the front of the drum Replacing both glide types together avoids a repeat repair Easy installation — typically 30–60 minutes Product Specifications Part Number XPWE03X37317-WE03X37318 OEM Part Number WE03X37317, WE03X37318 Part Type Dryer Drum Glide (Front Bearing Slide) Set Condition Aftermarket Replacement Set Includes WE03X37317 and WE03X37318 Front Bearing Slides Material Plastic Application GE, Hotpoint, Whirlpool & Kenmore Dryers and Washer-Dryer Combos Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer or switch off its circuit breaker, and shut off the gas supply first if it's a gas model. Remove the top and front panels per your model's service guide to expose the front of the drum, and disconnect any wiring that's in the way. Lift or support the drum enough to reach the worn glides, which are held in place at the front bearing support. Pull out the old glides, noting the position and orientation of each, and fit the new ones in the same positions. Reassemble the dryer and spin the drum by hand to confirm it turns smoothly before restoring power. Replace the glides as a set, since they wear at the same rate. Frequently Asked Questions My dryer squeals or rumbles loudly while tumbling — is this the part I need? Worn drum glides are a very common cause of squeaking and scraping from the drum area. If the plastic glides look thin, grooved, or chewed up, replacing them should quiet the dryer and restore smooth rotation. Also check the drum rollers and idler pulley, which can cause similar noises. Why are there two different part numbers? GE uses two glide types at the front of the drum: glide (WE03X37317) and  glide (WE03X37318). This set covers both, so you can replace the full set in one go. Should I replace all the glides or just the worn ones? Replace them together. The glides wear at about the same rate, so if one is worn the others are usually close behind. Will this fit my Whirlpool or Kenmore dryer? These glides are cross-listed for select Whirlpool and Kenmore dryers and washer-dryer combos as well as GE and Hotpoint. Compare the part numbers on your parts diagram against the Replaces list, or contact our support team with your model number and we'll confirm. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Quality Aftermarket Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less

Genuine OEM WP3406107 Dryer Door Switch The Genuine OEM Whirlpool WP3406107 is a dryer door switch for Whirlpool, Kenmore, Maytag, and KitchenAid dryers. It mounts inside the top of the dryer's front panel, with one end connecting to the wiring harness and the other passing through the panel to make contact with the door. When the door closes, it presses the switch's black tab, which tells the dryer the door is shut so it can run. When the switch wears out, the dryer may not start, may run with the door open, or may lose its interior light. This is the original Whirlpool part, a white, 6.5 inch, three-wire switch. Retailers describe the switch as a regular wear part and rate the repair as really easy, typically 15 to 30 minutes. Quick Answer The Genuine OEM WP3406107 Door Switch fixes a Whirlpool, Kenmore, Maytag, or KitchenAid dryer that won't start, runs with the door open, has a light that doesn't work, or has a door that won't close properly. Quick test: with the dryer unplugged, press the switch's black tab. If it has no resistance and doesn't click, the switch likely needs replacing. Common Problems This Part Fixes Dryer won't start Dryer runs with the door open Interior light doesn't work Door won't close or latch properly against the switch Cross Reference Information Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item. Replaces Part Numbers This door switch directly replaces the following part numbers: WP3406107, WPW10569603, 3406107, W10569603, 3405100, 3405101, 3406100, 3406101, 528948, 11259-65, 11288-80, WP3406107VP, AP6008561, AWP47183, EAP11741701, PD00002378, PS11741701 These numbers come from retailer cross-reference lists and span several generations of Whirlpool's own numbering for this switch. Confirm against your dryer's parts diagram, or contact our support team, if your model calls out a different number. Compatibility This door switch is listed for Whirlpool, Kenmore, Maytag, and KitchenAid dryers, including these examples: Kenmore 11060372710, 11060522900, 11060702990, 11060802990 Kenmore 11061202010, 11061262311, 11061802000 Whirlpool EED4400WQ Note: The models above are a small sample of a longer list, not a full list. This is a three-wire switch that replaces the two-wire switch found on many models, so compare it to your old switch, and contact our support team with your model number to verify fit before ordering. Key Features Genuine OEM Whirlpool dryer door switch, not an aftermarket equivalent Three-wire design; replaces the two-wire switch on many models White, 6.5 inch switch with a spring-loaded black tab Resolves no-start, runs-with-door-open, and light problems caused by a worn switch Typically a 15 to 30 minute repair Product Specifications Part Number WP3406107 OEM Part Number WP3406107 Part Type Dryer Door Switch Condition Genuine OEM Manufacturer Whirlpool Length 6.5 Inches Color White Wire Configuration Three-Wire Application Whirlpool, Kenmore, Maytag & KitchenAid Dryers Installation Notes ⚠️ Unplug Power Before Installing Unplug the dryer before beginning, and shut off the gas supply first on gas models. Wear work gloves, as cabinet edges can be sharp. The switch is mounted inside the top of the front panel, so follow your model's service guide to remove the panel needed to reach it. Note how the wiring connector is attached, disconnect it, and remove the old switch. Fit the new switch in the same position, reconnect the wiring, and reassemble. Restore power and confirm the dryer starts with the door closed and stops when the door is opened. Frequently Asked Questions My dryer won't start. Is this the part I need? A worn door switch is a common cause. With the dryer unplugged, press the switch's black tab. If there is no resistance and no click, the switch likely needs replacing. My dryer runs with the door open. Is that a problem? Yes. The door switch is a safety part that stops the dryer from running when the door is open. If the dryer runs with the door open, replace the switch promptly. My dryer has a two-wire switch. Will this three-wire switch work? Retailers list this three-wire switch as the replacement for the two-wire switch found on many models. Compare it to your old switch and your wiring, or contact our support team with your model number, before ordering. Will this fit my dryer? It is listed for many Whirlpool, Kenmore, Maytag, and KitchenAid dryers, but the model list above is only a sample. Check your model number against your parts diagram, or contact our support team and we'll verify it before you order. Shop With Confidence A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase. ✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout

Read more less