W10515058 Refrigerator LED Light & Cover Replaces WPW10515058
The XPARTCO W10515058 is an aftermarket replacement LED light and flat lens cover assembly for Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators. This is the main light driver in a three-board lighting system used on many of these refrigerators — it not only illuminates its own location, but also supplies power to the other LED lights in both the refrigerator and freezer compartments. The companion boards in this same system use a tapered lens cover, sold separately as our W10515057 listing.
Measuring approximately 5" x 3", rated 120V, with a durable plastic lens and integrated LED circuit. Because this board supplies power to lights beyond its own location, a failure here can affect lighting throughout more of the refrigerator than just the spot where this assembly is mounted. Symptoms of a failing assembly include this light being dim, flickering, or not turning on, and in some cases, other lights elsewhere in the refrigerator or freezer being affected as well, since they depend on this board for power. It directly replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142.
Quick Answer
The W10515058 Refrigerator LED Light & Cover fixes Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators with a dim, flickering, or non-working interior light — sometimes affecting lighting elsewhere in the fridge or freezer too, since this board supplies power to those lights as well. Flat lens cover, ~5" x 3", 120V. Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, 3021142. This is the flat-lens board that powers both the refrigerator and freezer lights — a different part from our W10515057 listing, which uses a tapered lens and is typically needed in pairs (2 tapered + 1 flat per refrigerator).
Common Problems This Part Fixes
Interior light dim or flickering
Interior light not turning on at all
Other lights elsewhere in the refrigerator or freezer also affected
All refrigerator lights strobing together when a door opens
Reduced visibility inside the refrigerator or freezer compartment
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator LED light and cover assembly directly replaces the following OEM and cross-reference part numbers:
WPW10515058, W10515058, W10465957, W10522611, AP6022534, AWP993990, EAP11755867, PD00030078, PS11755867
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This LED light and cover assembly is compatible with select Whirlpool refrigerators, and also fits select Kenmore, Maytag, KitchenAid, and Ikea refrigerators built on the Whirlpool platform, including model numbers such as:
WRS325FDAM02, WRS325FDAM04, WRS322FDAM04, WRS322FDAW04, WRS325FDAB02, WRS325FDAB06, WRS325FNAM, WRS335FDDM01
MSB27C2XAM00, MSB27C2XAW00, MSF22D4XAB00, MSF22D4XAB01, MSF22D4XAM00, MSF22D4XAM01, MSF22D4XAW00, MSF22D4XAW01
MSF25D4MDM00, MSF25D4MDM01, MSF25D4MDM02, MSF25D4XAW00, MSF25D4XAB00, MSF25D4XAM00
MSF21D4MDH00, MSF21D4MDH01, MSF21D4MDE00, MSF21D4MDE01, MSF21D4MDE02, MSF21D4MDM00, MSF21D4MDM01
MSF25D4MDE00, MSF25D4MDE01, MSF25D4MDE02, MSF25D4MDE03, MSF25D4MDH00, MSF25D4MDH01, MSF25D4MDH02, 8MSF25N4BW00, 8MSF25N4BW02
Kenmore 106.51132210, 106.51133213, 10651729410, 10641129210, 10641129211, 10641129212, 10641129213, 10651129210, 10651129211, 10651129212, 10651135610
Note — flat lens, not tapered, and typically needed alongside W10515057: This board uses a flat lens cover and serves as the light driver supplying power to the refrigerator and freezer lights. The companion boards in this same lighting system use a tapered lens cover, sold separately as our W10515057 listing — most of these refrigerators use 2 tapered-lens boards and 1 flat-lens board across the full lighting system. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which board your refrigerator needs.
Key Features
Aftermarket replacement LED light and flat lens cover assembly
Main light driver — supplies power to LED lights in both the refrigerator and freezer compartments
Resolves "dim or flickering light," "won't turn on," and "lights elsewhere also affected" symptoms
Approximately 5" x 3"
Rated 120V
Durable plastic lens with integrated LED circuit
Direct drop-in replacement matching the original mounting
Replaces WPW10515058, W10465957, W10522611, AP6022534, PS11755867, and 3021142
Compatible with Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
W10515058
OEM Part Number
WPW10515058
Part Type
Refrigerator LED Light & Flat Lens Cover Assembly
Condition
Aftermarket Replacement
Function
Illuminates its location and supplies power to refrigerator and freezer LED lights
Lens Type
Flat
Dimensions
Approx. 5" x 3"
Voltage
120V
Related Part
W10515057 (tapered lens, sold separately, typically 2 needed per system)
Repair Difficulty
Medium
Quantity
1 LED light and cover assembly
Compatible Brands
Whirlpool, Kenmore, Maytag, KitchenAid, Ikea
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power to the refrigerator before beginning, and safely store any food that could spoil while the power is off. Wear work gloves to protect your hands. Locate the flat-lens light assembly — this is the main driver board and may be positioned differently from the tapered-lens boards elsewhere in the same refrigerator. Use a flathead screwdriver to detach the front tabs and release the lens cover from the housing. Disconnect the wiring harness from the LED board. Remove the mounting screws or clips securing the old assembly and take it out. Install the new W10515058 in the same position, reconnect the wiring harness fully, and secure the mounting hardware. Snap the flat lens cover back into place. Restore power and confirm this light turns on normally, and check that lighting elsewhere in the refrigerator and freezer is also functioning correctly, since this board supplies their power. Tools needed: flathead screwdriver, work gloves.
Frequently Asked Questions
Why does replacing this one board sometimes fix lights in other parts of my refrigerator?
This board doesn't just light its own location — it also supplies power to the other LED lights in both the refrigerator and freezer compartments. If this board fails or malfunctions, it can affect lighting elsewhere in the unit even though the other light boards themselves are working fine. This is why some refrigerators show strange symptoms, like all the lights strobing together, when only this one board has actually failed.
Is this the same as your W10515057 listing?
No, these are different parts in the same lighting system. This W10515058 uses a flat lens cover and serves as the main power driver, while our W10515057 listing uses a tapered lens and is typically needed in pairs elsewhere in the same refrigerator. Most of these refrigerators use 2 tapered-lens boards (W10515057) and 1 flat-lens board (this W10515058) altogether.
Is this a difficult repair?
It's rated as a medium-difficulty repair — straightforward for a confident DIYer with a flathead screwdriver, but slightly more involved than the simplest appliance fixes since it involves detaching cover tabs and working with the wiring harness behind the lens.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Whirlpool OEM part, but is manufactured to match the LED module, flat lens cover design, and mounting configuration of the original WPW10515058 assembly used in compatible Whirlpool, Kenmore, Maytag, KitchenAid, and Ikea refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
DA31-00146E Genuine OEM Refrigerator Evaporator Fan Motor - Compatible with Samsung, Maytag
Product Description
Maintain optimal cooling with the DA31-00146E Genuine OEM Refrigerator Evaporator Fan Motor. This Samsung-manufactured motor is designed as a replacement for select Samsung and Maytag refrigerators. It powers the fan to circulate air through the freezer and refrigerator compartments, ensuring even temperature distribution and efficient cooling. This part addresses issues like fridge/freezer too warm, frost buildup, unusual noises, or the appliance not shutting off, often caused by a faulty or seized motor.
Note: Includes (1) evaporator fan motor (fan blade not included). Disconnect power before installation. Verify compatibility with your refrigerator model.
Replaces part numbers: DA31-00146E, 1486536, DA31-00146G, DREP3020LA/HAL, PD00002015, AP4136569, PS4138376.
Compatibility:
Compatible with select refrigerator models, including but not limited to:
Samsung: RFG238AABPXAA0000, RS25H5111BC/AA, RS265TDBP/XAA, RS267TDBP/XAA, RH25H5611BC/AA, RH25H5611WW/AA, DFSF9VKBABB, DFSS9VKBASS
Maytag: Various models (verify with model number)
Verify your model number or contact our support team for assistance.
Key Features:
✅ Brand and Models Compatibility: Fits select Samsung and Maytag refrigerators.
🔧 Specifications: Genuine OEM Samsung BLDC fan motor, 3.21W, 12VDC, 2520RPM, 1-1/2" shaft.
💪 Reliable Performance: Circulates air to maintain consistent temperatures and cool evaporator coils.
🛠️ Easy Installation: Requires screwdriver and pliers; typically installed in 30–60 minutes.
🛡️ Effective Fixes: Resolves warm fridge/freezer, frost buildup, noisy operation, or failure to shut off.
Product Specification
Part Number: DA31-00146E
Component Type: Refrigerator evaporator fan motor
Material: Metal and plastic
Electrical Specs: 3.21W, 12VDC, 2520RPM, 1-1/2" shaft
Compliance: UL-listed, Prop 65 warning for California
Installation Notes:
Safety First: Disconnect the refrigerator from the power source before installation.
Shop for high-quality appliance parts with a 30-day return policy. Keep your refrigerator cooling efficiently today!
Add to cart now for a reliable fix!
241993101 Refrigerator Genuine OEM Front Crisper Cover Support
Replaces Part Numbers: 241993101, 1513082, 240423701, 7241993101, AH2358880, EA2358880, AP4427109, PS2358880.
Description: This Front Crisper Cover Support is a Genuine OEM replacement part for select Frigidaire models. Crafted with high-quality materials, this front crisper cover support is designed to provide long-lasting support for your crisper drawer. It's easy to install and comes with everything you need to get your refrigerator back in working order. It may need replacing if the shelf or the drawer is sagging or misaligned.
4TM-D14 Refrigerator / Freezer Compressor Overload
Refrigerator / Freezer Thermal Overload Protector
Replaces Part Numbers: WP4344040, 4344040, 10377011, 10377015, 14251316, 4343849, 4357157, 4434376, 61001898, 68001203, R0213308, AP6009230, PS11742383.
Description: This Overload is a replacement for specific refrigerator models. It is an important component of the refrigerator's compressor system, providing protection against electrical overload. The overload helps safeguard the compressor from excessive electrical currents, preventing potential damage and ensuring the longevity of the refrigerator. It acts as a safety measure by interrupting the power supply to the compressor when necessary.
This is an aftermarket part that can be used as a replacement for the OEM part.
Genuine OEM AEQ72910411 Refrigerator Ice Maker Assembly
The Genuine OEM LG AEQ72910411 is a complete ice maker assembly kit for LG refrigerators. The ice maker takes in water, freezes it into ice cubes, and releases them into the ice storage bin. The kit includes the complete ice maker and housing, so it replaces the whole unit rather than a single component. If your refrigerator has stopped making ice and the water supply and freezer temperature check out, a faulty ice maker assembly may be the cause.
This is the original LG part, not an aftermarket equivalent. Because LG uses different ice makers across its refrigerator lines, check the part number against your model before ordering.
Quick Answer
The Genuine OEM AEQ72910411 Ice Maker Assembly replaces a failed ice maker in a compatible LG refrigerator that has stopped producing ice. Kit includes the complete ice maker and housing. Classic symptom: the refrigerator is cold and the water supply is on, but the ice bin stays empty.
Common Problems This Part Fixes
Refrigerator has stopped making ice
Ice maker not filling or freezing a new batch
Ice maker not releasing ice into the bin
Damaged or worn ice maker housing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This ice maker assembly is listed under the following part number:
AEQ72910411, 2629334, ALG53099, AP5675948, EAP7788168, OEM17027853, PD00029871, PS7788168
We have not found any superseded or alternate manufacturer numbers for this assembly. If your old ice maker or parts diagram shows a different number, contact our support team and we'll check whether it matches.
Compatibility
This ice maker assembly is listed for LG refrigerators, including these examples:
LG LFX25974SB, LFX25974ST, LFX25974SW
LG LFX28968SB, LFX28968ST, LFX28968SW
Revision suffixes such as LFX25974ST/01 and LFX28968ST/00
Note: Retailers list these two model families, each with several revision suffixes. This is not a full list of every LG refrigerator that uses this ice maker. Check your full model number, including the suffix, against your parts diagram, or contact our support team to verify fit before ordering.
Key Features
Genuine OEM LG ice maker assembly, not an aftermarket equivalent
Kit includes the complete ice maker and housing
Replaces a faulty ice maker when the refrigerator has stopped producing ice
Listed for LG LFX25974 and LFX28968 series refrigerators
Product Specifications
Part Number
AEQ72910411
OEM Part Number
AEQ72910411
Part Type
Refrigerator Ice Maker Assembly Kit
Condition
Genuine OEM
Manufacturer
LG
Kit Includes
Complete Ice Maker and Housing
Application
LG Refrigerators
Installation Notes
⚠️ Unplug Power And Shut Off Water Before Installing Unplug the refrigerator and turn off its water supply before beginning, and wear work gloves. Empty the ice bin and follow your model's service guide to reach and remove the ice maker. Note how the wiring is connected before disconnecting it, remove the old ice maker, and fit the new one in the same position. Reconnect the wiring, restore water and power, and allow time for the new ice maker to produce and release its first batches of ice.
Frequently Asked Questions
My refrigerator stopped making ice. Is this the part I need?
A failed ice maker is one possible cause. Before replacing it, check that the water supply is on and the water line isn't frozen, and that the freezer is cold enough. If those are fine and the ice maker still doesn't make or release ice, replacing the assembly is the next step.
What is included in the kit?
Retailers describe it as the complete ice maker and housing. They do not itemize individual components, so contact our support team if you need to confirm exactly what is in the box.
Is this an OEM or aftermarket part?
This is a genuine OEM part from LG, not an aftermarket equivalent.
Will this fit my refrigerator?
It is listed for LG LFX25974 and LFX28968 series refrigerators. Check your full model number against your parts diagram, or contact our support team and we'll verify it before you order.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Fast US Shipping ✓ Genuine OEM Parts ✓ Compatibility Support ✓ Secure Checkout
5303917633 Refrigerator Genuine OEM Defrost Timer
Description: This Electrolux Defrost Timer is an OEM replacement part for specific Frigidaire refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils. Once the defrost cycle is complete, the timer signals the heater to turn off, allowing the coils to cool and return to their normal temperature.
Replaces Part Numbers:5303917633, 3286, A769, AH468976, CC351, CC901, EA468976, AP2592955, PS468976.
California Residents only
WARNING: California’s Proposition 65
XP61005518 Refrigerator Relay
Fits Specific refrigerator Models
Replaces Part Numbers: 12002782, 1194680, 61005518, AH2004057, EA2004057, OEM12028982, AP4009659, PS2004057.
Description: This is a Replacement compressor overload and relay kit for Specific Whirlpool, Maytag, Kenmore Refrigerator models. Kit was recently redesigned by manufacturer.
This is an aftermarket part that can be used as a replacement for the OEM part.
California Residents only
WARNING: Cancer and/or Reproductive Harm - www.p65warnings.ca.gov
MJX41178908 Genuine LG OEM Refrigerator Water Valve
Fits Specific LG Refrigerator Models
Replaces Part Numbers: MJX41178908, 5221JA2011J, AH3536019, AP4451762, EA3536019, PS3536019.
Description: This Water Inlet Valve is an OEM part for select LG refrigerator models. It controls the flow of water into the refrigerator for the ice maker and water dispenser, ensuring the proper functioning of these features.
WR2X9391 Refrigerator Genuine OEM Light Socket – Compatible with GE, Hotpoint Refrigerators
Product Description
Illuminate your refrigerator interior with the WR2X9391 Refrigerator Genuine OEM Light Socket. This factory-approved socket provides a secure electrical connection for the interior light bulb, ensuring consistent illumination inside the fridge and freezer compartments. A damaged or faulty socket may cause the light to stop working, flicker, or fail to hold the bulb securely. Replacing it with this genuine OEM part restores reliable lighting and safe appliance operation.
Replaces Part Numbers
WR2X9391, 2446, SWR2X7270, WR02X0543, WR02X1038, WR02X11990, WR02X1670, WR02X1671, WR02X1846, WR02X2024, WR02X2257, WR02X2258, WR02X2432, WR02X3998, WR02X5691, WR02X5858, WR02X5993, WR02X7270, WR02X8265, WR02X9391, WR2X1038, WR2X1670, WR2X1671, WR2X1846, WR2X2024, WR2X2257, WR2X2258, WR2X2432, WR2X3998, WR2X543, WR2X5691, WR2X5858, WR2X5993, WR2X7270, WR2X8265, AP2060923, AH299782, EA299782, PS299782.
Compatibility
This genuine OEM light socket is compatible with select GE and Hotpoint refrigerators.
Example compatible models include (but are not limited to): GE GTS18FBSARWW, GE TFX22PRDAWW, and Hotpoint HSS25IFMCWW.
Always verify your refrigerator’s model number before ordering. Contact our support team if you’re unsure.
✅ Key Features
🔄 Genuine OEM Part – Factory-approved light socket for GE and Hotpoint refrigerators
💡 Reliable Lighting – Restores bright, consistent illumination inside your appliance
💰 Cost-Effective Repair – OEM replacement ensures durability and long life
🛠️ Quick DIY Installation – Installs in minutes with simple tools
🛡️ Fixes Common Issues – Solves no-light, flickering, or loose bulb connection problems
📐 Product Specification
Part Number: WR2X9391
Component Type: Refrigerator Light Socket
Material: High-durability plastic housing with secure electrical contacts
Mounting: Direct-fit replacement, screw-in installation
Operating Conditions: Designed for refrigerator/freezer compartments
Compliance: Genuine OEM certified
🛠️ Installation Notes
Tools Needed: Phillips screwdriver, flathead screwdriver
⚠️ Safety First: Always unplug the refrigerator before starting repairs to prevent electrical shock.
Steps:
Disconnect power and remove the interior light cover.
Unscrew or release the old light socket.
Detach the wiring harness from the old socket.
Connect the harness to the new WR2X9391 socket.
Secure socket in place and reinstall light cover.
Restore power and test the light.
⏱️ Time Required: 10–15 minutes
📦 Shop With Confidence
🚚 Free Shipping on All Orders
🛠️ Trusted Appliance Parts Supplier
🔄 30-Day Return Policy
Bring back bright lighting in your refrigerator — Add to Cart Now for a safe, factory-approved repair!
WR49X25197 Refrigerator Genuine OEM Axial Evaporator Motor Replaces WR60X26866
The WR49X25197 is a genuine GE OEM axial evaporator fan motor for the fresh food evaporator on select GE French door refrigerators. Unlike a standard evaporator fan motor, this is an axial-design motor purpose-built for the fresh food side of the refrigeration system, using its blade geometry to move air efficiently and quietly through that compartment's evaporator coil for precise, consistent temperature control.
Rated 13.6VDC, 0.16A. Manufactured by Nidec, designation V80E14MS2A3-57A611. Over time, motor bearings wear out or the motor can fail electrically, and symptoms typically include the fresh food compartment running warm while the freezer remains unaffected, unusual noise from the fresh food evaporator area, or inconsistent cooling in that compartment specifically, since this motor doesn't serve the freezer side at all. It directly replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, and AP6278228.
Quick Answer
The WR49X25197 Genuine OEM GE Axial Evaporator Motor fixes GE French door refrigerators where the fresh food compartment specifically runs warm, there's unusual noise from the fresh food evaporator area, or fresh food cooling is inconsistent while the freezer works fine. 13.6VDC, 0.16A axial motor. Replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, AP6278228. If your refrigerator was manufactured between May 2014 and March 2015 (serial range HD–FF), the control software must also be updated by factory service or a Software Update Module (WR98R882802) for this motor to perform correctly.
Common Problems This Part Fixes
Fresh food compartment running warm while the freezer stays normal
Unusual noise coming from the fresh food evaporator area
Inconsistent or fluctuating temperature in the fresh food section specifically
Fresh food evaporator fan not spinning or spinning intermittently
Reduced airflow affecting fresh food cooling performance
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator axial evaporator motor directly replaces the following OEM and cross-reference part numbers:
WR49X25197, WR60X26866, WR02X13733, WR60X10341, WR60X10356, WR60X10357, WR60X24303, WR60X26030, WR60X26033, V80E14MS2A3-57A611, 8817V W1, 239D1412P006, PD00038765, FIX12172983, AGE29673, AP6278228, PS12172983
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This axial evaporator motor is compatible with select GE French door refrigerators.
Note — fresh food evaporator only, and a software caveat for certain units: This motor serves the fresh food evaporator specifically — a different application from a general freezer evaporator fan motor. Additionally, if your refrigerator was manufactured between May 2014 and March 2015 (serial range HD through FF), the refrigerator's control software must be updated by factory service, or with a Software Update Module (WR98R882802), for this motor to perform correctly after installation. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine GE OEM part — factory-specified axial blade design for the fresh food evaporator
Resolves "fresh food running warm," "unusual noise from the fresh food evaporator," and "inconsistent fresh food cooling" symptoms
Rated 13.6VDC, 0.16A
Manufactured by Nidec, designation V80E14MS2A3-57A611
Direct drop-in replacement matching the original mounting and blade fitment
Replaces WR60X26866, WR60X10341, WR60X24303, WR60X26033, WR60X10356, WR60X10357, WR60X26030, 239D1412P001, 239D1412P006, and AP6278228
Compatible with GE French door refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
WR49X25197
OEM Part Number
WR60X26866
Part Type
Axial Evaporator Fan Motor (Fresh Food)
Condition
Genuine OEM
Brand
GE
Application
French Door Refrigerators — Fresh Food Evaporator
Voltage
13.6VDC
Amperage
0.16A
Motor Manufacturer
Nidec (V80E14MS2A3-57A611)
Motor Type
Axial
Software Update Caveat
Required for units mfg. May 2014–March 2015, serial range HD–FF (WR98R882802)
Quantity
1 evaporator motor
Compatible Brand
GE
Installation Notes
⚠️ Unplug Refrigerator Before Starting — Check Your Manufacture Date For A Software Update Requirement Disconnect power at the outlet before beginning, and move perishable food to a cooler for the duration of the repair. Wear work gloves. Before starting, check your refrigerator's serial number/manufacture date sticker (typically inside the fresh food compartment) — if your unit was made between May 2014 and March 2015 with a serial range of HD through FF, plan for a control software update via factory service or a Software Update Module (WR98R882802) after installing this motor, since without it the new motor may not perform correctly. Access to the fresh food evaporator is typically through an interior panel in the fresh food compartment, separate from the freezer's evaporator access — check your model's service diagram. If there's frost or ice buildup around the fan or coil, let the unit sit unplugged with the door open for a few hours before continuing. Photograph the wiring harness connector and the fan blade's orientation before disconnecting anything. Unplug the wiring harness connector from the old motor, remove the mounting screws or clips holding the motor bracket in place, and pull the motor and fan blade assembly free. Mount the new WR49X25197 in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing before reassembling the panel. Restore power and monitor the fresh food compartment over the next 24 hours to confirm even, consistent cooling has returned. Tools needed: Phillips screwdriver, work gloves.
Frequently Asked Questions
My fresh food section runs warm but the freezer is fine. Is this the right part?
Yes, this is exactly the symptom pattern this motor addresses, since it's dedicated specifically to the fresh food evaporator rather than serving both compartments. If your freezer is cooling normally and only the fresh food section is warm or inconsistent, this axial motor is a strong candidate for the cause.
Do I really need a software update after installing this motor?
Only if your refrigerator falls into a specific manufacturing window: units made between May 2014 and March 2015, identifiable by a serial range of HD through FF. For those units, GE's own guidance states the control software must be updated by factory service or with a Software Update Module (WR98R882802) for the new motor to perform correctly. If your refrigerator falls outside that date range, this step isn't necessary — check your serial number sticker to confirm which category your unit falls into.
Is this the same as a regular evaporator fan motor?
Not quite — this is an axial-design motor built specifically for the fresh food evaporator on GE French door refrigerators, distinct from general evaporator fan motors that serve the freezer side or both compartments together. Always confirm your model number and which compartment's fan has failed before ordering.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by GE to factory specifications — guaranteed fit, materials, and performance. It matches the original axial motor design, blade fitment, and electrical rating of the fresh food evaporator motor originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
5040JA2004A Genuine OEM LG Refrigerator Motor Damper Grommet (Rear)
The 5040JA2004A is a genuine LG OEM rubber motor damper grommet for LG and select Kenmore refrigerators. This small rubber component mounts and isolates a fan motor from the surrounding bracket, cushioning it against vibration as the motor runs. This is the rear-position grommet; LG refrigerators typically use more than one grommet to support a fan motor from multiple points.
Made of rubber, this grommet naturally degrades over years of exposure to cold temperatures and constant vibration, eventually cracking, hardening, or losing its cushioning shape. Once it fails, the motor it supports is no longer properly isolated, and the metal motor bracket can end up in direct contact with the surrounding housing. A worn or failed grommet typically shows up as new or worsening rattling, buzzing, or vibration noise coming from the back of the refrigerator, especially noticeable when the fan motor is running. It directly replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, and PD00027884.
Quick Answer
The 5040JA2004A Genuine OEM LG Refrigerator Motor Damper Grommet (Rear) fixes LG and select Kenmore refrigerators with new or worsening rattling, buzzing, or vibration noise from the back of the unit, especially when the fan motor is running. Rubber, rear-position grommet. Replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, PD00027884. This grommet is used with a fan motor at the rear of the refrigerator; sources vary on whether that's the evaporator or condenser fan depending on the specific model, so confirm your model number before ordering.
Common Problems This Part Fixes
Rattling or buzzing noise from the back of the refrigerator
Vibration noise that's especially noticeable when the fan motor is running
Noise that has gradually worsened over time
Visibly cracked, hardened, or flattened rubber grommet
Motor bracket that feels loose or vibrates excessively against its housing
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This motor damper grommet directly replaces the following OEM and cross-reference part numbers:
5040JA2004A, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, PD00027884
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This motor damper grommet is compatible with select LG refrigerators, and also fits select Kenmore refrigerators built on the LG platform, including model numbers such as LSXS26386S00, LTCS20030S/00, LTC24380SB00, LRSCS21935SW, LFC24770ST/02, LSXS26326W/01, and Kenmore 795.79043311, 795.51089011, 795.51832412, 795.79412810, and 795.78032211.
Note: This is the rear-position grommet. LG also lists a related grommet, part number 5040JA2009B, used as a support damper for fan motors on other models — the two are not necessarily interchangeable, so confirm your exact part number and position before ordering. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure.
Key Features
Genuine LG OEM part — factory-specified rubber compound and fit
Isolates the fan motor from its bracket, cushioning it against vibration
Resolves "rattling," "buzzing," and "vibration noise" symptoms caused by a worn or failed grommet
Rear-position grommet
Durable rubber construction designed for the refrigerator's cold operating environment
Direct drop-in replacement — no tools required on most models
Replaces 5040JA2004B, 1268010, AP4635690, AH3526229, EA3526229, PS3526229, EAP3526229, and PD00027884
Compatible with LG and select Kenmore refrigerators
Genuine OEM replacement — guaranteed fit, materials, and performance
Product Specifications
Part Number
5040JA2004A
Part Type
Fan Motor Damper Grommet — Rear
Condition
Genuine OEM
Brand
LG
Material
Rubber
Function
Isolates and cushions a fan motor from vibration at its bracket
Position
Rear
Related Part
5040JA2009B (support damper, different position/models — verify before substituting)
Repair Difficulty
Very Easy — typically no tools required
Quantity
1 damper grommet
Compatible Brands
LG, Kenmore
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning, and move perishable food to a cooler if access requires opening the freezer compartment. Wear work gloves. Access depends on your model — this grommet supports a fan motor that may be located behind the freezer's rear interior panel or in the compressor/machine compartment at the back or bottom of the unit, so check your model's service diagram for the exact location. Remove any panel screws needed to reach the motor bracket. Photograph the grommet's position and how it seats against the bracket before removing it. Gently remove the old, worn grommet from around the motor mounting post — it typically pulls or presses off without tools. Press the new 5040JA2004A grommet into the same position, seating it fully so it cushions the motor bracket evenly. Reassemble any panels removed for access, restore power, and run the refrigerator for a while to confirm the rattling or vibration noise has resolved. Tools needed: Phillips screwdriver (for panel access), work gloves.
Frequently Asked Questions
My refrigerator has developed a rattling noise from the back. Is this the grommet?
Yes, this is a common cause of exactly that symptom. Once the rubber grommet cracks, hardens, or loses its cushioning shape, the fan motor's mounting bracket is no longer properly isolated and can vibrate directly against the surrounding housing, producing a rattling or buzzing noise — especially noticeable whenever the fan motor is actively running.
Is this for the evaporator fan motor or the condenser fan motor?
Sources describe this grommet's application somewhat differently depending on the specific refrigerator model — some reference it as supporting the evaporator fan motor, others the condenser fan motor. In practice, this reflects that LG uses the same grommet design for fan motor mounting in more than one location depending on the model. Confirm your full model number against the compatibility list, or check your appliance's parts diagram, to be certain which motor this grommet supports on your specific unit.
Do I need any tools to replace this?
The grommet itself is tool-free — it simply presses into place around the motor mounting post. You will likely need a screwdriver to remove whatever panel is covering the area where the motor and grommet are located, but the grommet swap itself requires no tools.
Is this an OEM or aftermarket part?
This is a genuine OEM part, manufactured by LG to factory specifications — guaranteed fit, materials, and performance. It matches the original rubber compound and mounting fit of the motor damper grommet originally installed in your refrigerator.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Genuine OEM Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
XPARTCO DA97-20025A Refrigerator Condenser Fan Motor
The XPARTCO DA97-20025A is an aftermarket replacement condenser fan motor for Samsung French door, Flex 4-door, and side-by-side refrigerators. This small DC motor lives in the compressor compartment at the back or bottom of the refrigerator, and its job is to pull air across the condenser coils and the compressor itself to carry heat away from the refrigeration system. That's a very different job from an evaporator fan — the condenser fan cools the mechanical side of the system rather than circulating cold air to your food, so a failing condenser fan affects the whole refrigerator's cooling capacity rather than just one compartment.
Rated at 12V DC, 0.11A. When this fan slows down or stops, the compressor and condenser coils can't shed heat properly, which makes the whole system work harder and less effectively — both the fresh food and freezer compartments can run warm together, the compressor may run hot and cycle off on thermal protection, and you may notice increased noise or heat coming from the back or bottom of the cabinet. Common failure modes include worn motor bearings, a jammed blade from dust and debris buildup around the condenser coils, or electrical failure of the motor windings. It directly replaces PD00076495, 4962138, AP6883701, PS12720104, and EAP12720104.
Quick Answer
The XPARTCO DA97-20025A Refrigerator Condenser Fan Motor fixes Samsung French door, Flex 4-door, and side-by-side refrigerators where both compartments run warm together, the compressor runs hot or trips out, the refrigerator runs constantly, or there's unusual noise from the back or bottom of the cabinet. 12V DC, 0.11A. Replaces PD00076495, 4962138, AP6883701, PS12720104, EAP12720104. This cools the compressor and condenser coils — a different part and a different symptom pattern than an evaporator fan, which only affects internal air circulation.
Common Problems This Part Fixes
Both the fresh food and freezer compartments running warmer than normal at the same time
Refrigerator running constantly as the compressor struggles to keep up
Compressor running unusually hot, or shutting off on thermal overload protection
Unusual noise — humming, buzzing, or grinding — coming from the back or bottom of the refrigerator
Ice maker not producing ice due to overall insufficient cooling
Noticeably higher energy use as the compressor works harder to compensate
Fan blade in the compressor compartment that doesn't spin freely or spins with a wobble when checked by hand
Excessive dust or debris buildup visible around the condenser coils and fan
Cross Reference Information
Part numbers can change over a product's lifecycle as manufacturers update designs or release new appliance models. For your convenience, we've included any known superseded, alternate, or cross-reference part numbers that match this item.
Replaces Part Numbers
This refrigerator condenser fan motor directly replaces the following OEM and cross-reference part numbers:
DA97-20025A, 12 DC 0.11A 2122CNW Z19W12MS1A5-52K09, 4962138, AP6883701, ASM814341, EAP12720104, PD00076495, PS12720104.
If your part number is not listed above, contact our support team before ordering and we will verify compatibility.
Compatibility
This condenser fan motor is compatible with select Samsung French door, Flex 4-door, and side-by-side refrigerators, including model numbers such as:
RF27T5241SR, RF27T5201SR, RF27T5201SG, RF27T5501SR
RF28T5001SG, RF28T5001WW, RF28T5021SR, RF29BB8600QL, RF29BB860012
RF32CG5400SR, RF32CG5300SR, RF32CG5100SR
RF18A5101SR, RF22A4221SR, RF29A9071
RS22T5201SR, RS27T5200SG, RS27T5200SR, RS28A500ASR, RS28CB7600QL
Note — condenser fan, not evaporator fan: This motor cools the compressor and condenser coils in the machine compartment at the back or bottom of the refrigerator. It is a completely different part from an evaporator fan motor (such as our DA31-00334C or DA81-06013A listings), which sits behind the freezer's rear panel and circulates cold air to the food compartments. The two fail with different symptom patterns: a condenser fan problem tends to warm the whole refrigerator evenly and stress the compressor, while an evaporator fan problem typically leaves the freezer relatively fine while the fresh food side goes warm. Always verify your full model number before ordering. Contact our support team with your model number if you're unsure which fan motor your refrigerator needs.
Key Features
Aftermarket replacement condenser fan motor — draws air across the condenser coils and compressor to remove system heat
Resolves "whole fridge running warm," "compressor overheating," "runs constantly," and "noise from the back or bottom" symptoms caused by fan failure
Rated 12V DC, 0.11A
Optimized fan blade and motor design for efficient heat dissipation with reduced operating noise
High-quality ball bearings for extended service life
Direct drop-in replacement matching the original mounting and blade fitment
Replaces PD00076495, 4962138, AP6883701, PS12720104, and EAP12720104
Aftermarket replacement built to OEM-equivalent quality standards
Product Specifications
Part Number
DA97-20025A
OEM Part Number
DA97-20025A
Part Type
Refrigerator Condenser Fan Motor
Condition
Aftermarket Replacement
Brand
Samsung
Location
Compressor/machine compartment (back or bottom of cabinet)
Function
Cools the condenser coils and compressor
Voltage
12V DC
Amperage
0.11 A
Quantity
1 fan motor
Compatible Brand
Samsung
Installation Notes
⚠️ Unplug Refrigerator Before Starting Disconnect power at the outlet before beginning. Wear work gloves. Access is from the rear or bottom of the refrigerator, depending on your model: remove the rear access panel, or pull the unit out and remove the base grille/toe-kick panel at the bottom to reach the compressor compartment. Before condemning the motor, clear away any dust, lint, or debris built up around the condenser coils and fan blade — restricted airflow from a dirty coil produces similar symptoms to a failing motor and costs nothing to rule out. Photograph the wiring harness connector and the fan blade's position before disconnecting anything. Unplug the motor's wiring harness connector, remove the mounting screws or clips holding the motor bracket in place, and carefully pull the motor and fan blade assembly free. Transfer the fan blade to the new motor if it isn't included, matching the original orientation. Mount the new DA97-20025A in the same position, reconnect the wiring harness connector fully, and confirm the blade spins freely by hand without contacting the housing or coils before reassembling the access panel. Restore power and monitor the refrigerator over the next 24 hours to confirm normal, even cooling has returned and the compressor is no longer running hot. Tools needed: Phillips screwdriver, nut driver, work gloves.
Frequently Asked Questions
Both my fresh food and freezer sections are warm. Is this the right part?
Yes, that pattern points toward the condenser fan rather than an evaporator fan. Because the condenser fan cools the compressor and condenser coils that the entire refrigeration cycle depends on, a failing condenser fan tends to reduce cooling capacity across both compartments together, rather than leaving one side fine while the other struggles. If only your fresh food section is warm while the freezer stays cold, that's more typical of an evaporator fan issue instead.
My compressor feels very hot and the fridge cycles off sometimes. Could that be the fan?
Very possibly. Without adequate airflow from the condenser fan, the compressor and coils can't shed heat efficiently, causing the compressor to run hotter than designed. Many compressors have built-in thermal overload protection that shuts them down temporarily if they overheat, which can show up as the refrigerator seeming to randomly stop and restart cooling. Restoring proper condenser airflow is often what resolves this.
Could dirty condenser coils cause the same symptoms as a bad fan motor?
Yes, and it's worth checking before you buy a new motor. A condenser fan pushing air through coils caked in dust, pet hair, or debris will struggle to cool the system properly even if the motor itself is working fine. Clean the coils and the fan blade thoroughly first; if the fan still doesn't spin freely, spins with a wobble, or doesn't run at all afterward, the motor itself has failed and this replacement is the correct fix.
Do I need this motor or an evaporator fan motor?
It depends on the symptom and the fan's location. The condenser fan sits in the compressor compartment at the back or bottom of the refrigerator and cools the compressor and coils — a failure here tends to warm the whole unit and stress the compressor. An evaporator fan sits behind the freezer's rear interior panel and circulates already-cold air to the compartments — a failure there typically leaves the freezer relatively unaffected while the fresh food section goes warm. If you're not sure which fan has failed, check which one is running (or not) by listening near each location with the refrigerator open and the door switch triggered manually, or contact our support team with your model number.
Is this an OEM or aftermarket part?
This is an aftermarket replacement part built to OEM-equivalent quality standards. It is not a genuine Samsung OEM part, but is manufactured to match the electrical specifications (12V DC, 0.11A), fan blade design, and mounting configuration of the original DA97-20025A condenser fan motor used in compatible Samsung refrigerators.
Shop With Confidence
A U.S.-based appliance parts retailer specializing in genuine OEM and high-quality replacement parts. We stock components for all major appliance brands and offer fast shipping from our U.S. warehouse. Our team is available to help verify compatibility before you purchase.
✓ Quality Aftermarket Parts ✓ Fast US Shipping ✓ Compatibility Support ✓ Secure Checkout
